From: Mauri Sandberg Date: Sat, 5 Feb 2022 23:07:07 +0000 (+0200) Subject: kernel: 5.10: backport gpio-cascade and related symbols X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=966de48813e68c4e5447055cbb50ea1ab2e8d66c;p=openwrt%2Fstaging%2Fneocturne.git kernel: 5.10: backport gpio-cascade and related symbols The patch is under review at [1]. Signed-off-by: Mauri Sandberg [1] http://patchwork.ozlabs.org/project/linux-gpio/patch/20211026191506.3099-3-maukka@ext.kapsi.fi/ --- diff --git a/target/linux/generic/config-5.10 b/target/linux/generic/config-5.10 index 9595da0346..e96f9866ca 100644 --- a/target/linux/generic/config-5.10 +++ b/target/linux/generic/config-5.10 @@ -2085,6 +2085,7 @@ CONFIG_GPIOLIB_FASTPATH_LIMIT=512 # CONFIG_GPIO_BCM_KONA is not set # CONFIG_GPIO_BT8XX is not set # CONFIG_GPIO_CADENCE is not set +# CONFIG_GPIO_CASCADE is not set # CONFIG_GPIO_CDEV is not set # CONFIG_GPIO_CDEV_V1 is not set # CONFIG_GPIO_CS5535 is not set @@ -3679,8 +3680,13 @@ CONFIG_MTD_SPLIT_SUPPORT=y # CONFIG_MTD_NAND_MTK_BMT is not set # CONFIG_MTK_MMC is not set # CONFIG_MTK_MMSYS is not set +# CONFIG_MULTIPLEXER is not set CONFIG_MULTIUSER=y # CONFIG_MUTEX_SPIN_ON_OWNER is not set +# CONFIG_MUX_ADG792A is not set +# CONFIG_MUX_ADGS1408 is not set +# CONFIG_MUX_GPIO is not set +# CONFIG_MUX_MMIO is not set # CONFIG_MV643XX_ETH is not set # CONFIG_MVMDIO is not set # CONFIG_MVNETA_BM is not set diff --git a/target/linux/generic/pending-5.10/801-gpio-gpio-cascade-add-generic-GPIO-cascade.patch b/target/linux/generic/pending-5.10/801-gpio-gpio-cascade-add-generic-GPIO-cascade.patch new file mode 100644 index 0000000000..8d3b3cf962 --- /dev/null +++ b/target/linux/generic/pending-5.10/801-gpio-gpio-cascade-add-generic-GPIO-cascade.patch @@ -0,0 +1,232 @@ +From fc23ea48ba52c24f201fe5ca0132ee1a3de5a70a Mon Sep 17 00:00:00 2001 +From: Mauri Sandberg +Date: Thu, 25 Mar 2021 11:48:05 +0200 +Subject: [PATCH 2/2] gpio: gpio-cascade: add generic GPIO cascade + +Adds support for building cascades of GPIO lines. That is, it allows +setups when there is one upstream line and multiple cascaded lines, out +of which one can be chosen at a time. The status of the upstream line +can be conveyed to the selected cascaded line or, vice versa, the status +of the cascaded line can be conveyed to the upstream line. + +A multiplexer is being used to select, which cascaded GPIO line is being +used at any given time. + +At the moment only input direction is supported. In future it should be +possible to add support for output direction, too. + +Signed-off-by: Mauri Sandberg +Reviewed-by: Linus Walleij +Reviewed-by: Andy Shevchenko +--- +v7 -> v8: + - rearrange members in struct gpio_cascade + - cosmetic changes in file header and in one function declaration + - added Reviewed-by tags by Linus and Andy +v6 -> v7: + - In Kconfig add info about module name + - adhere to new convention that allows lines longer than 80 chars + - use dev_probe_err with upstream gpio line too + - refactor for cleaner exit of probe function. +v5 -> v6: + - In Kconfig, remove dependency to OF_GPIO and select only MULTIPLEXER + - refactor code preferring one-liners + - clean up prints, removing them from success-path. + - don't explicitly set gpio_chip.of_node as it's done in the GPIO library + - use devm_gpiochip_add_data instead of gpiochip_add +v4 -> v5: + - renamed gpio-mux-input -> gpio-cascade. refactored code accordingly + here and there and changed to use new bindings and compatible string + - ambigious and vague 'pin' was rename to 'upstream_line' + - dropped Tested-by and Reviewed-by due to changes in bindings + - dropped Reported-by suggested by an automatic bot as it was not really + appropriate to begin with + - functionally it's the same as v4 +v3 -> v4: + - Changed author email + - Included Tested-by and Reviewed-by from Drew +v2 -> v3: + - use managed device resources + - update Kconfig description +v1 -> v2: + - removed .owner from platform_driver as per test bot's instruction + - added MODULE_AUTHOR, MODULE_DESCRIPTION, MODULE_LICENSE + - added gpio_mux_input_get_direction as it's recommended for all chips + - removed because this is input only chip: gpio_mux_input_set_value + - removed because they are not needed for input/output only chips: + gpio_mux_input_direction_input + gpio_mux_input_direction_output + - fixed typo in an error message + - added info message about successful registration + - removed can_sleep flag as this does not sleep while getting GPIO value + like I2C or SPI do + - Updated description in Kconfig +--- + drivers/gpio/Kconfig | 15 +++++ + drivers/gpio/Makefile | 1 + + drivers/gpio/gpio-cascade.c | 117 ++++++++++++++++++++++++++++++++++++ + 3 files changed, 133 insertions(+) + create mode 100644 drivers/gpio/gpio-cascade.c + +diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig +index 37a6f77c86fe..e69457144459 100644 +--- a/drivers/gpio/Kconfig ++++ b/drivers/gpio/Kconfig +@@ -1694,4 +1694,19 @@ config GPIO_VIRTIO + + endmenu + ++comment "Other GPIO expanders" ++ ++config GPIO_CASCADE ++ tristate "General GPIO cascade" ++ select MULTIPLEXER ++ help ++ Say yes here to enable support for generic GPIO cascade. ++ ++ This allows building one-to-many cascades of GPIO lines using ++ different types of multiplexers readily available. At the ++ moment only input lines are supported. ++ ++ To build the driver as a module choose 'm' and the resulting module ++ will be called 'gpio-cascade'. ++ + endif +diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile +index 71ee9fc2ff83..e8945456e7ea 100644 +--- a/drivers/gpio/Makefile ++++ b/drivers/gpio/Makefile +@@ -45,6 +45,7 @@ obj-$(CONFIG_GPIO_BD9571MWV) += gpio-bd9571mwv.o + obj-$(CONFIG_GPIO_BRCMSTB) += gpio-brcmstb.o + obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o + obj-$(CONFIG_GPIO_CADENCE) += gpio-cadence.o ++obj-$(CONFIG_GPIO_CASCADE) += gpio-cascade.o + obj-$(CONFIG_GPIO_CLPS711X) += gpio-clps711x.o + obj-$(CONFIG_GPIO_SNPS_CREG) += gpio-creg-snps.o + obj-$(CONFIG_GPIO_CRYSTAL_COVE) += gpio-crystalcove.o +diff --git a/drivers/gpio/gpio-cascade.c b/drivers/gpio/gpio-cascade.c +new file mode 100644 +index 000000000000..5cbda882d79a +--- /dev/null ++++ b/drivers/gpio/gpio-cascade.c +@@ -0,0 +1,117 @@ ++// SPDX-License-Identifier: GPL-2.0-only ++/* ++ * A generic GPIO cascade driver ++ * ++ * Copyright (C) 2021 Mauri Sandberg ++ * ++ * This allows building cascades of GPIO lines in a manner illustrated ++ * below: ++ * ++ * /|---- Cascaded GPIO line 0 ++ * Upstream | |---- Cascaded GPIO line 1 ++ * GPIO line ----+ | . ++ * | | . ++ * \|---- Cascaded GPIO line n ++ * ++ * A multiplexer is being used to select, which cascaded line is being ++ * addressed at any given time. ++ * ++ * At the moment only input mode is supported due to lack of means for ++ * testing output functionality. At least theoretically output should be ++ * possible with open drain constructions. ++ */ ++ ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++struct gpio_cascade { ++ struct gpio_chip gpio_chip; ++ struct device *parent; ++ struct mux_control *mux_control; ++ struct gpio_desc *upstream_line; ++}; ++ ++static struct gpio_cascade *chip_to_cascade(struct gpio_chip *gc) ++{ ++ return container_of(gc, struct gpio_cascade, gpio_chip); ++} ++ ++static int gpio_cascade_get_direction(struct gpio_chip *gc, unsigned int offset) ++{ ++ return GPIO_LINE_DIRECTION_IN; ++} ++ ++static int gpio_cascade_get_value(struct gpio_chip *gc, unsigned int offset) ++{ ++ struct gpio_cascade *cas = chip_to_cascade(gc); ++ int ret; ++ ++ ret = mux_control_select(cas->mux_control, offset); ++ if (ret) ++ return ret; ++ ++ ret = gpiod_get_value(cas->upstream_line); ++ mux_control_deselect(cas->mux_control); ++ return ret; ++} ++ ++static int gpio_cascade_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct gpio_cascade *cas; ++ struct mux_control *mc; ++ struct gpio_desc *upstream; ++ struct gpio_chip *gc; ++ ++ cas = devm_kzalloc(dev, sizeof(*cas), GFP_KERNEL); ++ if (!cas) ++ return -ENOMEM; ++ ++ mc = devm_mux_control_get(dev, NULL); ++ if (IS_ERR(mc)) ++ return dev_err_probe(dev, PTR_ERR(mc), "unable to get mux-control\n"); ++ ++ cas->mux_control = mc; ++ upstream = devm_gpiod_get(dev, "upstream", GPIOD_IN); ++ if (IS_ERR(upstream)) ++ return dev_err_probe(dev, PTR_ERR(upstream), "unable to claim upstream GPIO line\n"); ++ ++ cas->upstream_line = upstream; ++ cas->parent = dev; ++ ++ gc = &cas->gpio_chip; ++ gc->get = gpio_cascade_get_value; ++ gc->get_direction = gpio_cascade_get_direction; ++ gc->base = -1; ++ gc->ngpio = mux_control_states(mc); ++ gc->label = dev_name(cas->parent); ++ gc->parent = cas->parent; ++ gc->owner = THIS_MODULE; ++ ++ platform_set_drvdata(pdev, cas); ++ return devm_gpiochip_add_data(dev, &cas->gpio_chip, NULL); ++} ++ ++static const struct of_device_id gpio_cascade_id[] = { ++ { .compatible = "gpio-cascade" }, ++ { /* sentinel */ } ++}; ++MODULE_DEVICE_TABLE(of, gpio_cascade_id); ++ ++static struct platform_driver gpio_cascade_driver = { ++ .driver = { ++ .name = "gpio-cascade", ++ .of_match_table = gpio_cascade_id, ++ }, ++ .probe = gpio_cascade_probe, ++}; ++module_platform_driver(gpio_cascade_driver); ++ ++MODULE_AUTHOR("Mauri Sandberg "); ++MODULE_DESCRIPTION("Generic GPIO cascade"); ++MODULE_LICENSE("GPL"); +-- +2.25.1 +