From: Antonio Flores Date: Tue, 27 Aug 2024 21:16:02 +0000 (-0400) Subject: rockchip: fixes and improve for NanoPi R6 series X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=9640bb0c051234849a83dd0725dfc900fbda101d;p=openwrt%2Fstaging%2Flinusw.git rockchip: fixes and improve for NanoPi R6 series Improvement and fixes for the nanopi r6 series, pending on the kernel mailing list https://lore.kernel.org/all/20240612205056.397204-1-seb-dev@mail.de Signed-off-by: Antonio Flores Link: https://github.com/openwrt/openwrt/pull/16275 Signed-off-by: Hauke Mehrtens --- diff --git a/target/linux/rockchip/patches-6.6/400-1-arm64-dts-rockchip-Add-common-definitions-for-NanoPi.patch b/target/linux/rockchip/patches-6.6/400-1-arm64-dts-rockchip-Add-common-definitions-for-NanoPi.patch new file mode 100644 index 0000000000..37fb6693dc --- /dev/null +++ b/target/linux/rockchip/patches-6.6/400-1-arm64-dts-rockchip-Add-common-definitions-for-NanoPi.patch @@ -0,0 +1,1573 @@ +From 93be10e4e180eeac9b6a57a4363e08c35bee3af9 Mon Sep 17 00:00:00 2001 +From: Sebastian Kropatsch +Date: Wed, 12 Jun 2024 22:48:10 +0200 +Subject: [PATCH 1/5] arm64: dts: rockchip: Add common definitions for NanoPi + R6C and R6S + +The FriendlyElec NanoPi R6C and R6S are quite similar boards, +although they differ in: +- M.2 M-Key connector vs second RTL8125BG Ethernet port +- One of the LEDs has a different function on each board +- 12-pin GPIO FPC vs 30-pin GPIO header +- R6S has a PWM-based IR receiver while the R6C has not +- R6S has a 5V fan connector while the R6C has not + +Refactor their DT files by adding a common definitions file to +improve differentiation clarity between both boards and to make +hardware-specific DT changes easier in the long run. +Do not introduce any functional changes. + +Signed-off-by: Sebastian Kropatsch +--- + .../boot/dts/rockchip/rk3588s-nanopi-r6.dtsi | 763 ++++++++++++++++++ + .../boot/dts/rockchip/rk3588s-nanopi-r6c.dts | 2 +- + .../boot/dts/rockchip/rk3588s-nanopi-r6s.dts | 756 +---------------- + 3 files changed, 767 insertions(+), 754 deletions(-) + create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi + +--- /dev/null ++++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi +@@ -0,0 +1,763 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++/* ++ * Common devicetree definitions for the NanoPi R6C and R6S ++ */ ++ ++/dts-v1/; ++ ++#include ++#include ++#include ++#include "rk3588s.dtsi" ++ ++/ { ++ aliases { ++ ethernet0 = &gmac1; ++ mmc0 = &sdmmc; ++ mmc1 = &sdhci; ++ }; ++ ++ chosen { ++ stdout-path = "serial2:1500000n8"; ++ }; ++ ++ adc-keys { ++ compatible = "adc-keys"; ++ io-channels = <&saradc 0>; ++ io-channel-names = "buttons"; ++ keyup-threshold-microvolt = <1800000>; ++ poll-interval = <100>; ++ ++ button-maskrom { ++ label = "Maskrom"; ++ linux,code = ; ++ press-threshold-microvolt = <1800>; ++ }; ++ }; ++ ++ gpio-keys { ++ compatible = "gpio-keys"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&key1_pin>; ++ ++ button-user { ++ label = "User"; ++ linux,code = ; ++ gpios = <&gpio1 RK_PC0 GPIO_ACTIVE_LOW>; ++ debounce-interval = <50>; ++ }; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ sys_led: led-0 { ++ label = "sys_led"; ++ gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>; ++ linux,default-trigger = "heartbeat"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sys_led_pin>; ++ }; ++ ++ wan_led: led-1 { ++ label = "wan_led"; ++ gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&wan_led_pin>; ++ }; ++ ++ lan1_led: led-2 { ++ label = "lan1_led"; ++ gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&lan1_led_pin>; ++ }; ++ ++ lan2_led: led-3 { ++ gpios = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&lan2_led_pin>; ++ }; ++ }; ++ ++ vcc5v0_sys: vcc5v0-sys-regulator { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc5v0_sys"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ }; ++ ++ vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc_1v1_nldo_s3"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1100000>; ++ regulator-max-microvolt = <1100000>; ++ vin-supply = <&vcc5v0_sys>; ++ }; ++ ++ vcc_3v3_s0: vcc-3v3-s0-regulator { ++ compatible = "regulator-fixed"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-name = "vcc_3v3_s0"; ++ vin-supply = <&vcc_3v3_s3>; ++ }; ++ ++ vcc_3v3_sd_s0: vcc-3v3-sd-s0-regulator { ++ compatible = "regulator-fixed"; ++ enable-active-high; ++ gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sd_s0_pwr>; ++ regulator-name = "vcc_3v3_sd_s0"; ++ regulator-boot-on; ++ regulator-max-microvolt = <3000000>; ++ regulator-min-microvolt = <3000000>; ++ vin-supply = <&vcc_3v3_s3>; ++ }; ++ ++ vcc_3v3_pcie20: vcc3v3-pcie20-regulator { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc_3v3_pcie20"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ vin-supply = <&vcc_3v3_s3>; ++ }; ++ ++ vcc5v0_usb: vcc5v0-usb-regulator { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc5v0_usb"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ vin-supply = <&vcc5v0_sys>; ++ }; ++ ++ vcc5v0_usb_otg0: vcc5v0-usb-otg0-regulator { ++ compatible = "regulator-fixed"; ++ enable-active-high; ++ gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&typec5v_pwren>; ++ regulator-name = "vcc5v0_usb_otg0"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ vin-supply = <&vcc5v0_usb>; ++ }; ++ ++ vcc5v0_host_20: vcc5v0-host-20-regulator { ++ compatible = "regulator-fixed"; ++ enable-active-high; ++ gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&vcc5v0_host20_en>; ++ regulator-name = "vcc5v0_host_20"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ vin-supply = <&vcc5v0_usb>; ++ }; ++}; ++ ++&combphy0_ps { ++ status = "okay"; ++}; ++ ++&combphy2_psu { ++ status = "okay"; ++}; ++ ++&cpu_b0 { ++ cpu-supply = <&vdd_cpu_big0_s0>; ++}; ++ ++&cpu_b1 { ++ cpu-supply = <&vdd_cpu_big0_s0>; ++}; ++ ++&cpu_b2 { ++ cpu-supply = <&vdd_cpu_big1_s0>; ++}; ++ ++&cpu_b3 { ++ cpu-supply = <&vdd_cpu_big1_s0>; ++}; ++ ++&cpu_l0 { ++ cpu-supply = <&vdd_cpu_lit_s0>; ++}; ++ ++&cpu_l1 { ++ cpu-supply = <&vdd_cpu_lit_s0>; ++}; ++ ++&cpu_l2 { ++ cpu-supply = <&vdd_cpu_lit_s0>; ++}; ++ ++&cpu_l3 { ++ cpu-supply = <&vdd_cpu_lit_s0>; ++}; ++ ++&gmac1 { ++ clock_in_out = "output"; ++ phy-handle = <&rgmii_phy1>; ++ phy-mode = "rgmii-rxid"; ++ pinctrl-0 = <&gmac1_miim ++ &gmac1_tx_bus2 ++ &gmac1_rx_bus2 ++ &gmac1_rgmii_clk ++ &gmac1_rgmii_bus>; ++ pinctrl-names = "default"; ++ tx_delay = <0x42>; ++ status = "okay"; ++}; ++ ++&i2c0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c0m2_xfer>; ++ status = "okay"; ++ ++ vdd_cpu_big0_s0: regulator@42 { ++ compatible = "rockchip,rk8602"; ++ reg = <0x42>; ++ fcs,suspend-voltage-selector = <1>; ++ regulator-name = "vdd_cpu_big0_s0"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <550000>; ++ regulator-max-microvolt = <1050000>; ++ regulator-ramp-delay = <2300>; ++ vin-supply = <&vcc5v0_sys>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vdd_cpu_big1_s0: regulator@43 { ++ compatible = "rockchip,rk8603", "rockchip,rk8602"; ++ reg = <0x43>; ++ fcs,suspend-voltage-selector = <1>; ++ regulator-name = "vdd_cpu_big1_s0"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <550000>; ++ regulator-max-microvolt = <1050000>; ++ regulator-ramp-delay = <2300>; ++ vin-supply = <&vcc5v0_sys>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++}; ++ ++&i2c2 { ++ status = "okay"; ++ ++ vdd_npu_s0: regulator@42 { ++ compatible = "rockchip,rk8602"; ++ reg = <0x42>; ++ fcs,suspend-voltage-selector = <1>; ++ regulator-name = "vdd_npu_s0"; ++ regulator-min-microvolt = <550000>; ++ regulator-max-microvolt = <950000>; ++ regulator-ramp-delay = <2300>; ++ regulator-boot-on; ++ regulator-always-on; ++ vin-supply = <&vcc5v0_sys>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++}; ++ ++&i2c6 { ++ clock-frequency = <200000>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c6m0_xfer>; ++ status = "okay"; ++ ++ hym8563: rtc@51 { ++ compatible = "haoyu,hym8563"; ++ reg = <0x51>; ++ #clock-cells = <0>; ++ clock-output-names = "hym8563"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&rtc_int>; ++ interrupt-parent = <&gpio0>; ++ interrupts = ; ++ wakeup-source; ++ }; ++}; ++ ++&mdio1 { ++ rgmii_phy1: ethernet-phy@1 { ++ compatible = "ethernet-phy-id001c.c916"; ++ reg = <0x1>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&rtl8211f_rst>; ++ reset-assert-us = <20000>; ++ reset-deassert-us = <100000>; ++ reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; ++ }; ++}; ++ ++&pcie2x1l1 { ++ reset-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>; ++ vpcie3v3-supply = <&vcc_3v3_pcie20>; ++ status = "okay"; ++}; ++ ++&pcie2x1l2 { ++ reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>; ++ vpcie3v3-supply = <&vcc_3v3_pcie20>; ++ status = "okay"; ++}; ++ ++&pinctrl { ++ gpio-key { ++ key1_pin: key1-pin { ++ rockchip,pins = <1 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ }; ++ ++ gpio-leds { ++ sys_led_pin: sys-led-pin { ++ rockchip,pins = ++ <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ ++ wan_led_pin: wan-led-pin { ++ rockchip,pins = ++ <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ ++ lan1_led_pin: lan1-led-pin { ++ rockchip,pins = ++ <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ ++ lan2_led_pin: lan2-led-pin { ++ rockchip,pins = ++ <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ ++ hym8563 { ++ rtc_int: rtc-int { ++ rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ }; ++ ++ sdmmc { ++ sd_s0_pwr: sd-s0-pwr { ++ rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ }; ++ ++ usb { ++ typec5v_pwren: typec5v-pwren { ++ rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ ++ vcc5v0_host20_en: vcc5v0-host20-en { ++ rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ ++ rtl8211f { ++ rtl8211f_rst: rtl8211f-rst { ++ rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++}; ++ ++&saradc { ++ vref-supply = <&avcc_1v8_s0>; ++ status = "okay"; ++}; ++ ++&sdhci { ++ bus-width = <8>; ++ no-sdio; ++ no-sd; ++ non-removable; ++ mmc-hs200-1_8v; ++ status = "okay"; ++}; ++ ++&sdmmc { ++ bus-width = <4>; ++ cap-sd-highspeed; ++ disable-wp; ++ max-frequency = <150000000>; ++ no-mmc; ++ no-sdio; ++ sd-uhs-sdr104; ++ vmmc-supply = <&vcc_3v3_sd_s0>; ++ vqmmc-supply = <&vccio_sd_s0>; ++ status = "okay"; ++}; ++ ++&spi2 { ++ status = "okay"; ++ assigned-clocks = <&cru CLK_SPI2>; ++ assigned-clock-rates = <200000000>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; ++ num-cs = <1>; ++ ++ pmic@0 { ++ compatible = "rockchip,rk806"; ++ spi-max-frequency = <1000000>; ++ reg = <0x0>; ++ ++ interrupt-parent = <&gpio0>; ++ interrupts = <7 IRQ_TYPE_LEVEL_LOW>; ++ ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, ++ <&rk806_dvs2_null>, <&rk806_dvs3_null>; ++ ++ system-power-controller; ++ ++ vcc1-supply = <&vcc5v0_sys>; ++ vcc2-supply = <&vcc5v0_sys>; ++ vcc3-supply = <&vcc5v0_sys>; ++ vcc4-supply = <&vcc5v0_sys>; ++ vcc5-supply = <&vcc5v0_sys>; ++ vcc6-supply = <&vcc5v0_sys>; ++ vcc7-supply = <&vcc5v0_sys>; ++ vcc8-supply = <&vcc5v0_sys>; ++ vcc9-supply = <&vcc5v0_sys>; ++ vcc10-supply = <&vcc5v0_sys>; ++ vcc11-supply = <&vcc_2v0_pldo_s3>; ++ vcc12-supply = <&vcc5v0_sys>; ++ vcc13-supply = <&vcc_1v1_nldo_s3>; ++ vcc14-supply = <&vcc_1v1_nldo_s3>; ++ vcca-supply = <&vcc5v0_sys>; ++ ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ rk806_dvs1_null: dvs1-null-pins { ++ pins = "gpio_pwrctrl1"; ++ function = "pin_fun0"; ++ }; ++ ++ rk806_dvs2_null: dvs2-null-pins { ++ pins = "gpio_pwrctrl2"; ++ function = "pin_fun0"; ++ }; ++ ++ rk806_dvs3_null: dvs3-null-pins { ++ pins = "gpio_pwrctrl3"; ++ function = "pin_fun0"; ++ }; ++ ++ regulators { ++ vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 { ++ regulator-boot-on; ++ regulator-min-microvolt = <550000>; ++ regulator-max-microvolt = <950000>; ++ regulator-ramp-delay = <12500>; ++ regulator-name = "vdd_gpu_s0"; ++ regulator-enable-ramp-delay = <400>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 { ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <550000>; ++ regulator-max-microvolt = <950000>; ++ regulator-ramp-delay = <12500>; ++ regulator-name = "vdd_cpu_lit_s0"; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vdd_log_s0: dcdc-reg3 { ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <675000>; ++ regulator-max-microvolt = <750000>; ++ regulator-ramp-delay = <12500>; ++ regulator-name = "vdd_log_s0"; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ regulator-suspend-microvolt = <750000>; ++ }; ++ }; ++ ++ vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 { ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <550000>; ++ regulator-max-microvolt = <950000>; ++ regulator-ramp-delay = <12500>; ++ regulator-name = "vdd_vdenc_s0"; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vdd_ddr_s0: dcdc-reg5 { ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <675000>; ++ regulator-max-microvolt = <900000>; ++ regulator-ramp-delay = <12500>; ++ regulator-name = "vdd_ddr_s0"; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ regulator-suspend-microvolt = <850000>; ++ }; ++ }; ++ ++ vdd2_ddr_s3: dcdc-reg6 { ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-name = "vdd2_ddr_s3"; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ }; ++ }; ++ ++ vcc_2v0_pldo_s3: dcdc-reg7 { ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <2000000>; ++ regulator-max-microvolt = <2000000>; ++ regulator-ramp-delay = <12500>; ++ regulator-name = "vdd_2v0_pldo_s3"; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <2000000>; ++ }; ++ }; ++ ++ vcc_3v3_s3: dcdc-reg8 { ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-name = "vcc_3v3_s3"; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <3300000>; ++ }; ++ }; ++ ++ vddq_ddr_s0: dcdc-reg9 { ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-name = "vddq_ddr_s0"; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcc_1v8_s3: dcdc-reg10 { ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-name = "vcc_1v8_s3"; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <1800000>; ++ }; ++ }; ++ ++ avcc_1v8_s0: pldo-reg1 { ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-name = "avcc_1v8_s0"; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ regulator-suspend-microvolt = <1800000>; ++ }; ++ }; ++ ++ vcc_1v8_s0: pldo-reg2 { ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-name = "vcc_1v8_s0"; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ regulator-suspend-microvolt = <1800000>; ++ }; ++ }; ++ ++ avdd_1v2_s0: pldo-reg3 { ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1200000>; ++ regulator-max-microvolt = <1200000>; ++ regulator-name = "avdd_1v2_s0"; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ avcc_3v3_s0: pldo-reg4 { ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-ramp-delay = <12500>; ++ regulator-name = "avcc_3v3_s0"; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vccio_sd_s0: pldo-reg5 { ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-ramp-delay = <12500>; ++ regulator-name = "vccio_sd_s0"; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ pldo6_s3: pldo-reg6 { ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-name = "pldo6_s3"; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <1800000>; ++ }; ++ }; ++ ++ vdd_0v75_s3: nldo-reg1 { ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <750000>; ++ regulator-max-microvolt = <750000>; ++ regulator-name = "vdd_0v75_s3"; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <750000>; ++ }; ++ }; ++ ++ avdd_ddr_pll_s0: nldo-reg2 { ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <850000>; ++ regulator-max-microvolt = <850000>; ++ regulator-name = "avdd_ddr_pll_s0"; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ regulator-suspend-microvolt = <850000>; ++ }; ++ }; ++ ++ avdd_0v75_s0: nldo-reg3 { ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <750000>; ++ regulator-max-microvolt = <750000>; ++ regulator-name = "avdd_0v75_s0"; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ avdd_0v85_s0: nldo-reg4 { ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <850000>; ++ regulator-max-microvolt = <850000>; ++ regulator-name = "avdd_0v85_s0"; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vdd_0v75_s0: nldo-reg5 { ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <750000>; ++ regulator-max-microvolt = <750000>; ++ regulator-name = "vdd_0v75_s0"; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ }; ++ }; ++}; ++ ++&tsadc { ++ status = "okay"; ++}; ++ ++&u2phy2 { ++ status = "okay"; ++}; ++ ++&u2phy2_host { ++ phy-supply = <&vcc5v0_host_20>; ++ status = "okay"; ++}; ++ ++&uart2 { ++ pinctrl-0 = <&uart2m0_xfer>; ++ status = "okay"; ++}; ++ ++&usb_host0_ehci { ++ status = "okay"; ++}; ++ ++&usb_host0_ohci { ++ status = "okay"; ++}; +--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts ++++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts +@@ -2,7 +2,7 @@ + + /dts-v1/; + +-#include "rk3588s-nanopi-r6s.dts" ++#include "rk3588s-nanopi-r6.dtsi" + + / { + model = "FriendlyElec NanoPi R6C"; +--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6s.dts ++++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6s.dts +@@ -2,763 +2,13 @@ + + /dts-v1/; + +-#include +-#include +-#include +-#include "rk3588s.dtsi" ++#include "rk3588s-nanopi-r6.dtsi" + + / { + model = "FriendlyElec NanoPi R6S"; + compatible = "friendlyarm,nanopi-r6s", "rockchip,rk3588s"; +- +- aliases { +- ethernet0 = &gmac1; +- mmc0 = &sdmmc; +- mmc1 = &sdhci; +- }; +- +- chosen { +- stdout-path = "serial2:1500000n8"; +- }; +- +- adc-keys { +- compatible = "adc-keys"; +- io-channels = <&saradc 0>; +- io-channel-names = "buttons"; +- keyup-threshold-microvolt = <1800000>; +- poll-interval = <100>; +- +- button-maskrom { +- label = "Maskrom"; +- linux,code = ; +- press-threshold-microvolt = <1800>; +- }; +- }; +- +- gpio-keys { +- compatible = "gpio-keys"; +- pinctrl-names = "default"; +- pinctrl-0 = <&key1_pin>; +- +- button-user { +- label = "User"; +- linux,code = ; +- gpios = <&gpio1 RK_PC0 GPIO_ACTIVE_LOW>; +- debounce-interval = <50>; +- }; +- }; +- +- leds { +- compatible = "gpio-leds"; +- +- sys_led: led-0 { +- label = "sys_led"; +- gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "heartbeat"; +- pinctrl-names = "default"; +- pinctrl-0 = <&sys_led_pin>; +- }; +- +- wan_led: led-1 { +- label = "wan_led"; +- gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>; +- pinctrl-names = "default"; +- pinctrl-0 = <&wan_led_pin>; +- }; +- +- lan1_led: led-2 { +- label = "lan1_led"; +- gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>; +- pinctrl-names = "default"; +- pinctrl-0 = <&lan1_led_pin>; +- }; +- +- lan2_led: led-3 { +- label = "lan2_led"; +- gpios = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>; +- pinctrl-names = "default"; +- pinctrl-0 = <&lan2_led_pin>; +- }; +- }; +- +- vcc5v0_sys: vcc5v0-sys-regulator { +- compatible = "regulator-fixed"; +- regulator-name = "vcc5v0_sys"; +- regulator-always-on; +- regulator-boot-on; +- regulator-min-microvolt = <5000000>; +- regulator-max-microvolt = <5000000>; +- }; +- +- vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator { +- compatible = "regulator-fixed"; +- regulator-name = "vcc_1v1_nldo_s3"; +- regulator-always-on; +- regulator-boot-on; +- regulator-min-microvolt = <1100000>; +- regulator-max-microvolt = <1100000>; +- vin-supply = <&vcc5v0_sys>; +- }; +- +- vcc_3v3_s0: vcc-3v3-s0-regulator { +- compatible = "regulator-fixed"; +- regulator-always-on; +- regulator-boot-on; +- regulator-min-microvolt = <3300000>; +- regulator-max-microvolt = <3300000>; +- regulator-name = "vcc_3v3_s0"; +- vin-supply = <&vcc_3v3_s3>; +- }; +- +- vcc_3v3_sd_s0: vcc-3v3-sd-s0-regulator { +- compatible = "regulator-fixed"; +- enable-active-high; +- gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>; +- pinctrl-names = "default"; +- pinctrl-0 = <&sd_s0_pwr>; +- regulator-name = "vcc_3v3_sd_s0"; +- regulator-boot-on; +- regulator-max-microvolt = <3000000>; +- regulator-min-microvolt = <3000000>; +- vin-supply = <&vcc_3v3_s3>; +- }; +- +- vcc_3v3_pcie20: vcc3v3-pcie20-regulator { +- compatible = "regulator-fixed"; +- regulator-name = "vcc_3v3_pcie20"; +- regulator-always-on; +- regulator-boot-on; +- regulator-min-microvolt = <3300000>; +- regulator-max-microvolt = <3300000>; +- vin-supply = <&vcc_3v3_s3>; +- }; +- +- vcc5v0_usb: vcc5v0-usb-regulator { +- compatible = "regulator-fixed"; +- regulator-name = "vcc5v0_usb"; +- regulator-always-on; +- regulator-boot-on; +- regulator-min-microvolt = <5000000>; +- regulator-max-microvolt = <5000000>; +- vin-supply = <&vcc5v0_sys>; +- }; +- +- vcc5v0_usb_otg0: vcc5v0-usb-otg0-regulator { +- compatible = "regulator-fixed"; +- enable-active-high; +- gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>; +- pinctrl-names = "default"; +- pinctrl-0 = <&typec5v_pwren>; +- regulator-name = "vcc5v0_usb_otg0"; +- regulator-min-microvolt = <5000000>; +- regulator-max-microvolt = <5000000>; +- vin-supply = <&vcc5v0_usb>; +- }; +- +- vcc5v0_host_20: vcc5v0-host-20-regulator { +- compatible = "regulator-fixed"; +- enable-active-high; +- gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>; +- pinctrl-names = "default"; +- pinctrl-0 = <&vcc5v0_host20_en>; +- regulator-name = "vcc5v0_host_20"; +- regulator-min-microvolt = <5000000>; +- regulator-max-microvolt = <5000000>; +- vin-supply = <&vcc5v0_usb>; +- }; +-}; +- +-&combphy0_ps { +- status = "okay"; +-}; +- +-&combphy2_psu { +- status = "okay"; +-}; +- +-&cpu_b0 { +- cpu-supply = <&vdd_cpu_big0_s0>; +-}; +- +-&cpu_b1 { +- cpu-supply = <&vdd_cpu_big0_s0>; +-}; +- +-&cpu_b2 { +- cpu-supply = <&vdd_cpu_big1_s0>; +-}; +- +-&cpu_b3 { +- cpu-supply = <&vdd_cpu_big1_s0>; +-}; +- +-&cpu_l0 { +- cpu-supply = <&vdd_cpu_lit_s0>; +-}; +- +-&cpu_l1 { +- cpu-supply = <&vdd_cpu_lit_s0>; +-}; +- +-&cpu_l2 { +- cpu-supply = <&vdd_cpu_lit_s0>; +-}; +- +-&cpu_l3 { +- cpu-supply = <&vdd_cpu_lit_s0>; +-}; +- +-&gmac1 { +- clock_in_out = "output"; +- phy-handle = <&rgmii_phy1>; +- phy-mode = "rgmii-rxid"; +- pinctrl-0 = <&gmac1_miim +- &gmac1_tx_bus2 +- &gmac1_rx_bus2 +- &gmac1_rgmii_clk +- &gmac1_rgmii_bus>; +- pinctrl-names = "default"; +- tx_delay = <0x42>; +- status = "okay"; +-}; +- +-&i2c0 { +- pinctrl-names = "default"; +- pinctrl-0 = <&i2c0m2_xfer>; +- status = "okay"; +- +- vdd_cpu_big0_s0: regulator@42 { +- compatible = "rockchip,rk8602"; +- reg = <0x42>; +- fcs,suspend-voltage-selector = <1>; +- regulator-name = "vdd_cpu_big0_s0"; +- regulator-always-on; +- regulator-boot-on; +- regulator-min-microvolt = <550000>; +- regulator-max-microvolt = <1050000>; +- regulator-ramp-delay = <2300>; +- vin-supply = <&vcc5v0_sys>; +- +- regulator-state-mem { +- regulator-off-in-suspend; +- }; +- }; +- +- vdd_cpu_big1_s0: regulator@43 { +- compatible = "rockchip,rk8603", "rockchip,rk8602"; +- reg = <0x43>; +- fcs,suspend-voltage-selector = <1>; +- regulator-name = "vdd_cpu_big1_s0"; +- regulator-always-on; +- regulator-boot-on; +- regulator-min-microvolt = <550000>; +- regulator-max-microvolt = <1050000>; +- regulator-ramp-delay = <2300>; +- vin-supply = <&vcc5v0_sys>; +- +- regulator-state-mem { +- regulator-off-in-suspend; +- }; +- }; +-}; +- +-&i2c2 { +- status = "okay"; +- +- vdd_npu_s0: regulator@42 { +- compatible = "rockchip,rk8602"; +- reg = <0x42>; +- fcs,suspend-voltage-selector = <1>; +- regulator-name = "vdd_npu_s0"; +- regulator-min-microvolt = <550000>; +- regulator-max-microvolt = <950000>; +- regulator-ramp-delay = <2300>; +- regulator-boot-on; +- regulator-always-on; +- vin-supply = <&vcc5v0_sys>; +- +- regulator-state-mem { +- regulator-off-in-suspend; +- }; +- }; +-}; +- +-&i2c6 { +- clock-frequency = <200000>; +- pinctrl-names = "default"; +- pinctrl-0 = <&i2c6m0_xfer>; +- status = "okay"; +- +- hym8563: rtc@51 { +- compatible = "haoyu,hym8563"; +- reg = <0x51>; +- #clock-cells = <0>; +- clock-output-names = "hym8563"; +- pinctrl-names = "default"; +- pinctrl-0 = <&rtc_int>; +- interrupt-parent = <&gpio0>; +- interrupts = ; +- wakeup-source; +- }; +-}; +- +-&mdio1 { +- rgmii_phy1: ethernet-phy@1 { +- compatible = "ethernet-phy-id001c.c916"; +- reg = <0x1>; +- pinctrl-names = "default"; +- pinctrl-0 = <&rtl8211f_rst>; +- reset-assert-us = <20000>; +- reset-deassert-us = <100000>; +- reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; +- }; +-}; +- +-&pcie2x1l1 { +- reset-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>; +- vpcie3v3-supply = <&vcc_3v3_pcie20>; +- status = "okay"; +-}; +- +-&pcie2x1l2 { +- reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>; +- vpcie3v3-supply = <&vcc_3v3_pcie20>; +- status = "okay"; +-}; +- +-&pinctrl { +- gpio-key { +- key1_pin: key1-pin { +- rockchip,pins = <1 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>; +- }; +- }; +- +- gpio-leds { +- sys_led_pin: sys-led-pin { +- rockchip,pins = +- <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; +- }; +- +- wan_led_pin: wan-led-pin { +- rockchip,pins = +- <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; +- }; +- +- lan1_led_pin: lan1-led-pin { +- rockchip,pins = +- <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; +- }; +- +- lan2_led_pin: lan2-led-pin { +- rockchip,pins = +- <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; +- }; +- }; +- +- hym8563 { +- rtc_int: rtc-int { +- rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; +- }; +- }; +- +- sdmmc { +- sd_s0_pwr: sd-s0-pwr { +- rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>; +- }; +- }; +- +- usb { +- typec5v_pwren: typec5v-pwren { +- rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; +- }; +- +- vcc5v0_host20_en: vcc5v0-host20-en { +- rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; +- }; +- }; +- +- rtl8211f { +- rtl8211f_rst: rtl8211f-rst { +- rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; +- }; +- }; +-}; +- +-&saradc { +- vref-supply = <&avcc_1v8_s0>; +- status = "okay"; +-}; +- +-&sdhci { +- bus-width = <8>; +- no-sdio; +- no-sd; +- non-removable; +- mmc-hs200-1_8v; +- status = "okay"; +-}; +- +-&sdmmc { +- bus-width = <4>; +- cap-sd-highspeed; +- disable-wp; +- max-frequency = <150000000>; +- no-mmc; +- no-sdio; +- sd-uhs-sdr104; +- vmmc-supply = <&vcc_3v3_sd_s0>; +- vqmmc-supply = <&vccio_sd_s0>; +- status = "okay"; +-}; +- +-&spi2 { +- status = "okay"; +- assigned-clocks = <&cru CLK_SPI2>; +- assigned-clock-rates = <200000000>; +- pinctrl-names = "default"; +- pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; +- num-cs = <1>; +- +- pmic@0 { +- compatible = "rockchip,rk806"; +- spi-max-frequency = <1000000>; +- reg = <0x0>; +- +- interrupt-parent = <&gpio0>; +- interrupts = <7 IRQ_TYPE_LEVEL_LOW>; +- +- pinctrl-names = "default"; +- pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, +- <&rk806_dvs2_null>, <&rk806_dvs3_null>; +- +- system-power-controller; +- +- vcc1-supply = <&vcc5v0_sys>; +- vcc2-supply = <&vcc5v0_sys>; +- vcc3-supply = <&vcc5v0_sys>; +- vcc4-supply = <&vcc5v0_sys>; +- vcc5-supply = <&vcc5v0_sys>; +- vcc6-supply = <&vcc5v0_sys>; +- vcc7-supply = <&vcc5v0_sys>; +- vcc8-supply = <&vcc5v0_sys>; +- vcc9-supply = <&vcc5v0_sys>; +- vcc10-supply = <&vcc5v0_sys>; +- vcc11-supply = <&vcc_2v0_pldo_s3>; +- vcc12-supply = <&vcc5v0_sys>; +- vcc13-supply = <&vcc_1v1_nldo_s3>; +- vcc14-supply = <&vcc_1v1_nldo_s3>; +- vcca-supply = <&vcc5v0_sys>; +- +- gpio-controller; +- #gpio-cells = <2>; +- +- rk806_dvs1_null: dvs1-null-pins { +- pins = "gpio_pwrctrl1"; +- function = "pin_fun0"; +- }; +- +- rk806_dvs2_null: dvs2-null-pins { +- pins = "gpio_pwrctrl2"; +- function = "pin_fun0"; +- }; +- +- rk806_dvs3_null: dvs3-null-pins { +- pins = "gpio_pwrctrl3"; +- function = "pin_fun0"; +- }; +- +- regulators { +- vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 { +- regulator-boot-on; +- regulator-min-microvolt = <550000>; +- regulator-max-microvolt = <950000>; +- regulator-ramp-delay = <12500>; +- regulator-name = "vdd_gpu_s0"; +- regulator-enable-ramp-delay = <400>; +- +- regulator-state-mem { +- regulator-off-in-suspend; +- }; +- }; +- +- vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 { +- regulator-always-on; +- regulator-boot-on; +- regulator-min-microvolt = <550000>; +- regulator-max-microvolt = <950000>; +- regulator-ramp-delay = <12500>; +- regulator-name = "vdd_cpu_lit_s0"; +- +- regulator-state-mem { +- regulator-off-in-suspend; +- }; +- }; +- +- vdd_log_s0: dcdc-reg3 { +- regulator-always-on; +- regulator-boot-on; +- regulator-min-microvolt = <675000>; +- regulator-max-microvolt = <750000>; +- regulator-ramp-delay = <12500>; +- regulator-name = "vdd_log_s0"; +- +- regulator-state-mem { +- regulator-off-in-suspend; +- regulator-suspend-microvolt = <750000>; +- }; +- }; +- +- vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 { +- regulator-always-on; +- regulator-boot-on; +- regulator-min-microvolt = <550000>; +- regulator-max-microvolt = <950000>; +- regulator-ramp-delay = <12500>; +- regulator-name = "vdd_vdenc_s0"; +- +- regulator-state-mem { +- regulator-off-in-suspend; +- }; +- }; +- +- vdd_ddr_s0: dcdc-reg5 { +- regulator-always-on; +- regulator-boot-on; +- regulator-min-microvolt = <675000>; +- regulator-max-microvolt = <900000>; +- regulator-ramp-delay = <12500>; +- regulator-name = "vdd_ddr_s0"; +- +- regulator-state-mem { +- regulator-off-in-suspend; +- regulator-suspend-microvolt = <850000>; +- }; +- }; +- +- vdd2_ddr_s3: dcdc-reg6 { +- regulator-always-on; +- regulator-boot-on; +- regulator-name = "vdd2_ddr_s3"; +- +- regulator-state-mem { +- regulator-on-in-suspend; +- }; +- }; +- +- vcc_2v0_pldo_s3: dcdc-reg7 { +- regulator-always-on; +- regulator-boot-on; +- regulator-min-microvolt = <2000000>; +- regulator-max-microvolt = <2000000>; +- regulator-ramp-delay = <12500>; +- regulator-name = "vdd_2v0_pldo_s3"; +- +- regulator-state-mem { +- regulator-on-in-suspend; +- regulator-suspend-microvolt = <2000000>; +- }; +- }; +- +- vcc_3v3_s3: dcdc-reg8 { +- regulator-always-on; +- regulator-boot-on; +- regulator-min-microvolt = <3300000>; +- regulator-max-microvolt = <3300000>; +- regulator-name = "vcc_3v3_s3"; +- +- regulator-state-mem { +- regulator-on-in-suspend; +- regulator-suspend-microvolt = <3300000>; +- }; +- }; +- +- vddq_ddr_s0: dcdc-reg9 { +- regulator-always-on; +- regulator-boot-on; +- regulator-name = "vddq_ddr_s0"; +- +- regulator-state-mem { +- regulator-off-in-suspend; +- }; +- }; +- +- vcc_1v8_s3: dcdc-reg10 { +- regulator-always-on; +- regulator-boot-on; +- regulator-min-microvolt = <1800000>; +- regulator-max-microvolt = <1800000>; +- regulator-name = "vcc_1v8_s3"; +- +- regulator-state-mem { +- regulator-on-in-suspend; +- regulator-suspend-microvolt = <1800000>; +- }; +- }; +- +- avcc_1v8_s0: pldo-reg1 { +- regulator-always-on; +- regulator-boot-on; +- regulator-min-microvolt = <1800000>; +- regulator-max-microvolt = <1800000>; +- regulator-name = "avcc_1v8_s0"; +- +- regulator-state-mem { +- regulator-off-in-suspend; +- regulator-suspend-microvolt = <1800000>; +- }; +- }; +- +- vcc_1v8_s0: pldo-reg2 { +- regulator-always-on; +- regulator-boot-on; +- regulator-min-microvolt = <1800000>; +- regulator-max-microvolt = <1800000>; +- regulator-name = "vcc_1v8_s0"; +- +- regulator-state-mem { +- regulator-off-in-suspend; +- regulator-suspend-microvolt = <1800000>; +- }; +- }; +- +- avdd_1v2_s0: pldo-reg3 { +- regulator-always-on; +- regulator-boot-on; +- regulator-min-microvolt = <1200000>; +- regulator-max-microvolt = <1200000>; +- regulator-name = "avdd_1v2_s0"; +- +- regulator-state-mem { +- regulator-off-in-suspend; +- }; +- }; +- +- avcc_3v3_s0: pldo-reg4 { +- regulator-always-on; +- regulator-boot-on; +- regulator-min-microvolt = <3300000>; +- regulator-max-microvolt = <3300000>; +- regulator-ramp-delay = <12500>; +- regulator-name = "avcc_3v3_s0"; +- +- regulator-state-mem { +- regulator-off-in-suspend; +- }; +- }; +- +- vccio_sd_s0: pldo-reg5 { +- regulator-always-on; +- regulator-boot-on; +- regulator-min-microvolt = <1800000>; +- regulator-max-microvolt = <3300000>; +- regulator-ramp-delay = <12500>; +- regulator-name = "vccio_sd_s0"; +- +- regulator-state-mem { +- regulator-off-in-suspend; +- }; +- }; +- +- pldo6_s3: pldo-reg6 { +- regulator-always-on; +- regulator-boot-on; +- regulator-min-microvolt = <1800000>; +- regulator-max-microvolt = <1800000>; +- regulator-name = "pldo6_s3"; +- +- regulator-state-mem { +- regulator-on-in-suspend; +- regulator-suspend-microvolt = <1800000>; +- }; +- }; +- +- vdd_0v75_s3: nldo-reg1 { +- regulator-always-on; +- regulator-boot-on; +- regulator-min-microvolt = <750000>; +- regulator-max-microvolt = <750000>; +- regulator-name = "vdd_0v75_s3"; +- +- regulator-state-mem { +- regulator-on-in-suspend; +- regulator-suspend-microvolt = <750000>; +- }; +- }; +- +- avdd_ddr_pll_s0: nldo-reg2 { +- regulator-always-on; +- regulator-boot-on; +- regulator-min-microvolt = <850000>; +- regulator-max-microvolt = <850000>; +- regulator-name = "avdd_ddr_pll_s0"; +- +- regulator-state-mem { +- regulator-off-in-suspend; +- regulator-suspend-microvolt = <850000>; +- }; +- }; +- +- avdd_0v75_s0: nldo-reg3 { +- regulator-always-on; +- regulator-boot-on; +- regulator-min-microvolt = <750000>; +- regulator-max-microvolt = <750000>; +- regulator-name = "avdd_0v75_s0"; +- +- regulator-state-mem { +- regulator-off-in-suspend; +- }; +- }; +- +- avdd_0v85_s0: nldo-reg4 { +- regulator-always-on; +- regulator-boot-on; +- regulator-min-microvolt = <850000>; +- regulator-max-microvolt = <850000>; +- regulator-name = "avdd_0v85_s0"; +- +- regulator-state-mem { +- regulator-off-in-suspend; +- }; +- }; +- +- vdd_0v75_s0: nldo-reg5 { +- regulator-always-on; +- regulator-boot-on; +- regulator-min-microvolt = <750000>; +- regulator-max-microvolt = <750000>; +- regulator-name = "vdd_0v75_s0"; +- +- regulator-state-mem { +- regulator-off-in-suspend; +- }; +- }; +- }; +- }; +-}; +- +-&tsadc { +- status = "okay"; +-}; +- +-&u2phy2 { +- status = "okay"; +-}; +- +-&u2phy2_host { +- phy-supply = <&vcc5v0_host_20>; +- status = "okay"; +-}; +- +-&uart2 { +- pinctrl-0 = <&uart2m0_xfer>; +- status = "okay"; +-}; +- +-&usb_host0_ehci { +- status = "okay"; + }; + +-&usb_host0_ohci { +- status = "okay"; ++&lan2_led { ++ label = "lan2_led"; + }; diff --git a/target/linux/rockchip/patches-6.6/400-2-arm64-dts-rockchip-Fix-regulators-gmac-and-naming-on.patch b/target/linux/rockchip/patches-6.6/400-2-arm64-dts-rockchip-Fix-regulators-gmac-and-naming-on.patch new file mode 100644 index 0000000000..1ff8220bde --- /dev/null +++ b/target/linux/rockchip/patches-6.6/400-2-arm64-dts-rockchip-Fix-regulators-gmac-and-naming-on.patch @@ -0,0 +1,470 @@ +From cd909b668132acd6f846336f15abf5185cfc4dbc Mon Sep 17 00:00:00 2001 +From: Sebastian Kropatsch +Date: Wed, 12 Jun 2024 22:48:11 +0200 +Subject: [PATCH 2/5] arm64: dts: rockchip: Fix regulators, gmac and naming on + NanoPi R6C/R6S + +Fix the alphabetical ordering in some nodes and rename some regulators +and pins to match the schematics [1][2] as well as to adhere to +preferred naming schemes. + +In addition to that: +* vcc_3v3_sd_s0: Fix voltage to be 3.3V +* vcc3v3_pcie: + - Move to NanoPi R6C, this power switch is not available on R6S + - Fix vin-supply (is vcc_5v0 per schematics) + - Add gpios/pincrtl to enable power +* vcc5v0_usb: Remove this regulator since according to the schematics, + vcc5v0_host_20 and vcc5v0_usb_otg0 are directly powered by vcc_5v0 +* gmac1: Add rx_delay of 0 (no delay since phy-mode = "rgmii-rxid") +* rgmii_phy1: Add phy-supply as seen in schematics +* pcie2*: + - Add pinctrl reset pins + - Update vpcie3v3-supply to match the schematics +* sdhci: Add vmmc-supply and vqmmc-supply + +Links: +[1] https://wiki.friendlyelec.com/wiki/images/f/f7/NanoPi_R6C_2302_SCH.PDF +[2] https://wiki.friendlyelec.com/wiki/images/2/2f/NanoPi_R6S_2208_SCH.PDF + +Fixes: f1b11f43b3e9 ("arm64: dts: rockchip: Add support for NanoPi R6S") +Signed-off-by: Sebastian Kropatsch +--- + .../boot/dts/rockchip/rk3588s-nanopi-r6.dtsi | 169 +++++++++--------- + .../boot/dts/rockchip/rk3588s-nanopi-r6c.dts | 28 +++ + .../boot/dts/rockchip/rk3588s-nanopi-r6s.dts | 5 + + 3 files changed, 122 insertions(+), 80 deletions(-) + +--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi ++++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi +@@ -21,7 +21,7 @@ + stdout-path = "serial2:1500000n8"; + }; + +- adc-keys { ++ adc-key-maskrom { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; +@@ -41,10 +41,10 @@ + pinctrl-0 = <&key1_pin>; + + button-user { +- label = "User"; +- linux,code = ; +- gpios = <&gpio1 RK_PC0 GPIO_ACTIVE_LOW>; + debounce-interval = <50>; ++ gpios = <&gpio1 RK_PC0 GPIO_ACTIVE_LOW>; ++ label = "User Button"; ++ linux,code = ; + }; + }; + +@@ -80,26 +80,27 @@ + }; + }; + +- vcc5v0_sys: vcc5v0-sys-regulator { ++ vcc_5v0: regulator-vcc-5v0 { + compatible = "regulator-fixed"; +- regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; ++ regulator-name = "vcc_5v0"; + }; + +- vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator { ++ vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 { + compatible = "regulator-fixed"; +- regulator-name = "vcc_1v1_nldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; +- vin-supply = <&vcc5v0_sys>; ++ regulator-name = "vcc_1v1_nldo_s3"; ++ vin-supply = <&vcc_5v0>; + }; + +- vcc_3v3_s0: vcc-3v3-s0-regulator { ++ /* SY6280AAC power switch (U3824 in schematics) */ ++ vcc_3v3_s0: regulator-vcc-3v3-s0 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; +@@ -109,61 +110,45 @@ + vin-supply = <&vcc_3v3_s3>; + }; + +- vcc_3v3_sd_s0: vcc-3v3-sd-s0-regulator { ++ vcc_3v3_sd_s0: regulator-vcc-3v3-sd-s0 { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&sd_s0_pwr>; +- regulator-name = "vcc_3v3_sd_s0"; +- regulator-boot-on; +- regulator-max-microvolt = <3000000>; +- regulator-min-microvolt = <3000000>; +- vin-supply = <&vcc_3v3_s3>; +- }; +- +- vcc_3v3_pcie20: vcc3v3-pcie20-regulator { +- compatible = "regulator-fixed"; +- regulator-name = "vcc_3v3_pcie20"; +- regulator-always-on; + regulator-boot-on; +- regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; ++ regulator-min-microvolt = <3300000>; ++ regulator-name = "vcc_3v3_sd_s0"; + vin-supply = <&vcc_3v3_s3>; + }; + +- vcc5v0_usb: vcc5v0-usb-regulator { +- compatible = "regulator-fixed"; +- regulator-name = "vcc5v0_usb"; +- regulator-always-on; +- regulator-boot-on; +- regulator-min-microvolt = <5000000>; +- regulator-max-microvolt = <5000000>; +- vin-supply = <&vcc5v0_sys>; +- }; +- +- vcc5v0_usb_otg0: vcc5v0-usb-otg0-regulator { ++ /* SY6280AAC power switch (U9539 in schematics) */ ++ /* For USB 2.0 Type-A port */ ++ vcc_5v0_host_20: regulator-vcc-5v0-host-20 { + compatible = "regulator-fixed"; + enable-active-high; +- gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>; ++ gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; +- pinctrl-0 = <&typec5v_pwren>; +- regulator-name = "vcc5v0_usb_otg0"; ++ pinctrl-0 = <&usb_host_pwren_h>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; +- vin-supply = <&vcc5v0_usb>; ++ regulator-name = "vcc_5v0_host_20"; ++ vin-supply = <&vcc_5v0>; + }; + +- vcc5v0_host_20: vcc5v0-host-20-regulator { ++ /* SY6280AAC power switch (U9538 in schematics) */ ++ /* For USB 3.0 Type-A port */ ++ vcc5v0_usb_otg0: regulator-vcc5v0-usb-otg0 { + compatible = "regulator-fixed"; + enable-active-high; +- gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>; ++ gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; +- pinctrl-0 = <&vcc5v0_host20_en>; +- regulator-name = "vcc5v0_host_20"; ++ pinctrl-0 = <&typec5v_pwren_h>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; +- vin-supply = <&vcc5v0_usb>; ++ regulator-name = "vcc5v0_usb_otg0"; ++ vin-supply = <&vcc_5v0>; + }; + }; + +@@ -211,12 +196,13 @@ + clock_in_out = "output"; + phy-handle = <&rgmii_phy1>; + phy-mode = "rgmii-rxid"; ++ pinctrl-names = "default"; + pinctrl-0 = <&gmac1_miim + &gmac1_tx_bus2 + &gmac1_rx_bus2 + &gmac1_rgmii_clk + &gmac1_rgmii_bus>; +- pinctrl-names = "default"; ++ rx_delay = <0x00>; + tx_delay = <0x42>; + status = "okay"; + }; +@@ -230,13 +216,13 @@ + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; +- regulator-name = "vdd_cpu_big0_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; ++ regulator-name = "vdd_cpu_big0_s0"; + regulator-ramp-delay = <2300>; +- vin-supply = <&vcc5v0_sys>; ++ vin-supply = <&vcc_5v0>; + + regulator-state-mem { + regulator-off-in-suspend; +@@ -247,13 +233,13 @@ + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + fcs,suspend-voltage-selector = <1>; +- regulator-name = "vdd_cpu_big1_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; ++ regulator-name = "vdd_cpu_big1_s0"; + regulator-ramp-delay = <2300>; +- vin-supply = <&vcc5v0_sys>; ++ vin-supply = <&vcc_5v0>; + + regulator-state-mem { + regulator-off-in-suspend; +@@ -268,13 +254,13 @@ + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; +- regulator-name = "vdd_npu_s0"; ++ regulator-always-on; ++ regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; ++ regulator-name = "vdd_npu_s0"; + regulator-ramp-delay = <2300>; +- regulator-boot-on; +- regulator-always-on; +- vin-supply = <&vcc5v0_sys>; ++ vin-supply = <&vcc_5v0>; + + regulator-state-mem { + regulator-off-in-suspend; +@@ -293,35 +279,43 @@ + reg = <0x51>; + #clock-cells = <0>; + clock-output-names = "hym8563"; +- pinctrl-names = "default"; +- pinctrl-0 = <&rtc_int>; + interrupt-parent = <&gpio0>; + interrupts = ; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&rtc_int>; + wakeup-source; + }; + }; + ++/* RTL8211F-CG Ethernet */ + &mdio1 { + rgmii_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id001c.c916"; + reg = <0x1>; ++ phy-supply = <&vcc_3v3_s0>; + pinctrl-names = "default"; +- pinctrl-0 = <&rtl8211f_rst>; ++ pinctrl-0 = <&gmac1_rstn_l>; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + }; + }; + ++/* RTL8125BG Ethernet */ + &pcie2x1l1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pcie20x1_1_perstn_m2>; + reset-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>; +- vpcie3v3-supply = <&vcc_3v3_pcie20>; ++ vpcie3v3-supply = <&vcc_3v3_s3>; + status = "okay"; + }; + ++/* R6C: M.2 M-Key socket */ ++/* R6S: RTL8125BG Ethernet */ + &pcie2x1l2 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pcie20x1_2_perstn_m0>; + reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>; +- vpcie3v3-supply = <&vcc_3v3_pcie20>; + status = "okay"; + }; + +@@ -360,24 +354,34 @@ + }; + }; + ++ pcie { ++ pcie20x1_1_perstn_m2: pcie2x1-1-rst { ++ rockchip,pins = <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ ++ pcie20x1_2_perstn_m0: pcie2x1-2-rst { ++ rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ + sdmmc { +- sd_s0_pwr: sd-s0-pwr { ++ sd_s0_pwr: sd-pwr { + rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb { +- typec5v_pwren: typec5v-pwren { ++ typec5v_pwren_h: usb3-pwren { + rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + +- vcc5v0_host20_en: vcc5v0-host20-en { ++ usb_host_pwren_h: usb2-pwren { + rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + rtl8211f { +- rtl8211f_rst: rtl8211f-rst { ++ gmac1_rstn_l: rtl8211f-rst { + rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +@@ -388,15 +392,19 @@ + status = "okay"; + }; + ++/* eMMC */ + &sdhci { + bus-width = <8>; +- no-sdio; ++ mmc-hs200-1_8v; + no-sd; ++ no-sdio; + non-removable; +- mmc-hs200-1_8v; ++ vmmc-supply = <&vcc_3v3_s3>; ++ vqmmc-supply = <&vcc_1v8_s3>; + status = "okay"; + }; + ++/* microSD card */ + &sdmmc { + bus-width = <4>; + cap-sd-highspeed; +@@ -411,16 +419,15 @@ + }; + + &spi2 { +- status = "okay"; + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; ++ num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; +- num-cs = <1>; ++ status = "okay"; + +- pmic@0 { ++ rk806_single: pmic@0 { + compatible = "rockchip,rk806"; +- spi-max-frequency = <1000000>; + reg = <0x0>; + + interrupt-parent = <&gpio0>; +@@ -430,23 +437,24 @@ + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + ++ spi-max-frequency = <1000000>; + system-power-controller; + +- vcc1-supply = <&vcc5v0_sys>; +- vcc2-supply = <&vcc5v0_sys>; +- vcc3-supply = <&vcc5v0_sys>; +- vcc4-supply = <&vcc5v0_sys>; +- vcc5-supply = <&vcc5v0_sys>; +- vcc6-supply = <&vcc5v0_sys>; +- vcc7-supply = <&vcc5v0_sys>; +- vcc8-supply = <&vcc5v0_sys>; +- vcc9-supply = <&vcc5v0_sys>; +- vcc10-supply = <&vcc5v0_sys>; ++ vcc1-supply = <&vcc_5v0>; ++ vcc2-supply = <&vcc_5v0>; ++ vcc3-supply = <&vcc_5v0>; ++ vcc4-supply = <&vcc_5v0>; ++ vcc5-supply = <&vcc_5v0>; ++ vcc6-supply = <&vcc_5v0>; ++ vcc7-supply = <&vcc_5v0>; ++ vcc8-supply = <&vcc_5v0>; ++ vcc9-supply = <&vcc_5v0>; ++ vcc10-supply = <&vcc_5v0>; + vcc11-supply = <&vcc_2v0_pldo_s3>; +- vcc12-supply = <&vcc5v0_sys>; ++ vcc12-supply = <&vcc_5v0>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; +- vcca-supply = <&vcc5v0_sys>; ++ vcca-supply = <&vcc_5v0>; + + gpio-controller; + #gpio-cells = <2>; +@@ -745,10 +753,11 @@ + }; + + &u2phy2_host { +- phy-supply = <&vcc5v0_host_20>; ++ phy-supply = <&vcc_5v0_host_20>; + status = "okay"; + }; + ++/* Debug UART */ + &uart2 { + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts ++++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts +@@ -7,8 +7,36 @@ + / { + model = "FriendlyElec NanoPi R6C"; + compatible = "friendlyarm,nanopi-r6c", "rockchip,rk3588s"; ++ ++ /* MP2143DJ power switch (U9536 in schematics) */ ++ vcc3v3_pcie: regulator-vcc3v3-pcie { ++ compatible = "regulator-fixed"; ++ enable-active-high; ++ gpios = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pcie20x1_2_con_pwren>; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-name = "vcc3v3_pcie"; ++ vin-supply = <&vcc_5v0>; ++ }; + }; + + &lan2_led { + label = "user_led"; + }; ++ ++/* M.2 M-Key socket */ ++&pcie2x1l2 { ++ vpcie3v3-supply = <&vcc3v3_pcie>; ++}; ++ ++&pinctrl { ++ pcie { ++ pcie20x1_2_con_pwren: pcie20x1-2-con-pwren { ++ rockchip,pins = <3 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++}; +--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6s.dts ++++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6s.dts +@@ -12,3 +12,8 @@ + &lan2_led { + label = "lan2_led"; + }; ++ ++/* RTL8125BG Ethernet */ ++&pcie2x1l2 { ++ vpcie3v3-supply = <&vcc_3v3_s3>; ++}; diff --git a/target/linux/rockchip/patches-6.6/400-3-arm64-dts-rockchip-Improve-LEDs-on-NanoPi-R6C-R6S.patch b/target/linux/rockchip/patches-6.6/400-3-arm64-dts-rockchip-Improve-LEDs-on-NanoPi-R6C-R6S.patch new file mode 100644 index 0000000000..8ca0ed5880 --- /dev/null +++ b/target/linux/rockchip/patches-6.6/400-3-arm64-dts-rockchip-Improve-LEDs-on-NanoPi-R6C-R6S.patch @@ -0,0 +1,184 @@ +From dfa0e0a42f3e256189849a45203aac98a0b4d1aa Mon Sep 17 00:00:00 2001 +From: Sebastian Kropatsch +Date: Wed, 12 Jun 2024 22:48:12 +0200 +Subject: [PATCH 3/5] arm64: dts: rockchip: Improve LEDs on NanoPi R6C/R6S + +Move led-3 node into NanoPi R6C/R6S's source files since they have +different functionalities on each board: On the R6S this LED is used +to signal LAN2 link up, while on the R6C this LED does not have a +pre-defined purpose. + +In addition to that: + - Remove deprecated label property + - Add color and function properties + - Add linux,default-trigger to trigger on Ethernet link + +Signed-off-by: Sebastian Kropatsch +--- + .../boot/dts/rockchip/rk3588s-nanopi-r6.dtsi | 32 +++++++------------ + .../boot/dts/rockchip/rk3588s-nanopi-r6c.dts | 22 ++++++++++--- + .../boot/dts/rockchip/rk3588s-nanopi-r6s.dts | 26 +++++++++++++-- + 3 files changed, 54 insertions(+), 26 deletions(-) + +--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi ++++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi +@@ -8,6 +8,7 @@ + #include + #include + #include ++#include + #include "rk3588s.dtsi" + + / { +@@ -52,7 +53,8 @@ + compatible = "gpio-leds"; + + sys_led: led-0 { +- label = "sys_led"; ++ color = ; ++ function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + pinctrl-names = "default"; +@@ -60,24 +62,22 @@ + }; + + wan_led: led-1 { +- label = "wan_led"; ++ color = ; ++ function = LED_FUNCTION_WAN; + gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>; ++ linux,default-trigger = "stmmac-0:01:link"; + pinctrl-names = "default"; + pinctrl-0 = <&wan_led_pin>; + }; + + lan1_led: led-2 { +- label = "lan1_led"; ++ color = ; ++ function = LED_FUNCTION_LAN; + gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>; ++ linux,default-trigger = "r8169-3-3100:00:link"; + pinctrl-names = "default"; + pinctrl-0 = <&lan1_led_pin>; + }; +- +- lan2_led: led-3 { +- gpios = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>; +- pinctrl-names = "default"; +- pinctrl-0 = <&lan2_led_pin>; +- }; + }; + + vcc_5v0: regulator-vcc-5v0 { +@@ -328,23 +328,15 @@ + + gpio-leds { + sys_led_pin: sys-led-pin { +- rockchip,pins = +- <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; ++ rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wan_led_pin: wan-led-pin { +- rockchip,pins = +- <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; ++ rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + lan1_led_pin: lan1-led-pin { +- rockchip,pins = +- <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; +- }; +- +- lan2_led_pin: lan2-led-pin { +- rockchip,pins = +- <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; ++ rockchip,pins = <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + +--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts ++++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts +@@ -8,6 +8,18 @@ + model = "FriendlyElec NanoPi R6C"; + compatible = "friendlyarm,nanopi-r6c", "rockchip,rk3588s"; + ++ leds { ++ compatible = "gpio-leds"; ++ ++ led1_led: led-3 { ++ color = ; ++ function = "led1"; ++ gpios = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&led1_led_pin>; ++ }; ++ }; ++ + /* MP2143DJ power switch (U9536 in schematics) */ + vcc3v3_pcie: regulator-vcc3v3-pcie { + compatible = "regulator-fixed"; +@@ -24,16 +36,18 @@ + }; + }; + +-&lan2_led { +- label = "user_led"; +-}; +- + /* M.2 M-Key socket */ + &pcie2x1l2 { + vpcie3v3-supply = <&vcc3v3_pcie>; + }; + + &pinctrl { ++ gpio-leds { ++ led1_led_pin: led1-led-pin { ++ rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ + pcie { + pcie20x1_2_con_pwren: pcie20x1-2-con-pwren { + rockchip,pins = <3 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; +--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6s.dts ++++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6s.dts +@@ -7,13 +7,35 @@ + / { + model = "FriendlyElec NanoPi R6S"; + compatible = "friendlyarm,nanopi-r6s", "rockchip,rk3588s"; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ lan2_led: led-3 { ++ color = ; ++ function = LED_FUNCTION_LAN; ++ function-enumerator = <2>; ++ gpios = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>; ++ linux,default-trigger = "r8169-4-4100:00:link"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&lan2_led_pin>; ++ }; ++ }; + }; + +-&lan2_led { +- label = "lan2_led"; ++&lan1_led { ++ function-enumerator = <1>; + }; + + /* RTL8125BG Ethernet */ + &pcie2x1l2 { + vpcie3v3-supply = <&vcc_3v3_s3>; + }; ++ ++&pinctrl { ++ gpio-leds { ++ lan2_led_pin: lan2-led-pin { ++ rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++}; diff --git a/target/linux/rockchip/patches-6.6/400-4-arm64-dts-rockchip-Enable-lower-USB3-port-on-NanoPi-.patch b/target/linux/rockchip/patches-6.6/400-4-arm64-dts-rockchip-Enable-lower-USB3-port-on-NanoPi-.patch new file mode 100644 index 0000000000..c154f97cd7 --- /dev/null +++ b/target/linux/rockchip/patches-6.6/400-4-arm64-dts-rockchip-Enable-lower-USB3-port-on-NanoPi-.patch @@ -0,0 +1,62 @@ +From e067643b4e321db4de3274198b13732cce37f5c1 Mon Sep 17 00:00:00 2001 +From: Sebastian Kropatsch +Date: Wed, 12 Jun 2024 22:48:13 +0200 +Subject: [PATCH 4/5] arm64: dts: rockchip: Enable lower USB3 port on NanoPi + R6C/R6S + +Enable support for the lower USB 3.0 Type-A port on the NanoPi R6C and +NanoPi R6S. The upper USB 2.0 Type-A port is already supported. + +Signed-off-by: Sebastian Kropatsch +--- + .../boot/dts/rockchip/rk3588s-nanopi-r6.dtsi | 28 +++++++++++++++++++ + 1 file changed, 28 insertions(+) + +--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi ++++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi +@@ -740,6 +740,17 @@ + status = "okay"; + }; + ++/* USB2 PHY for USB 3.0 Type-A (lower port)*/ ++&u2phy0 { ++ status = "okay"; ++}; ++ ++&u2phy0_otg { ++ phy-supply = <&vcc5v0_usb_otg0>; ++ status = "okay"; ++}; ++ ++/* USB2 PHY for USB 2.0 Type-A (upper port)*/ + &u2phy2 { + status = "okay"; + }; +@@ -755,10 +766,27 @@ + status = "okay"; + }; + ++/* USB 2.0 Type-A (upper port) */ ++/* PHY: <&u2phy2_host> */ + &usb_host0_ehci { + status = "okay"; + }; + ++/* USB 2.0 Type-A (upper port) */ ++/* PHY: <&u2phy2_host> */ + &usb_host0_ohci { + status = "okay"; + }; ++ ++/* USB 3.0 Type-A (lower port) */ ++/* PHYs: <&u2phy0_otg>, <&usbdp_phy0> */ ++&usb_host0_xhci { ++ dr_mode = "host"; ++ extcon = <&u2phy0>; ++ status = "okay"; ++}; ++ ++/* USB3 PHY for USB 3.0 Type-A (lower port)*/ ++&usbdp_phy0 { ++ status = "okay"; ++}; diff --git a/target/linux/rockchip/patches-6.6/400-5-arm64-dts-rockchip-Enable-GPU-on-NanoPi-R6C-R6S.patch b/target/linux/rockchip/patches-6.6/400-5-arm64-dts-rockchip-Enable-GPU-on-NanoPi-R6C-R6S.patch new file mode 100644 index 0000000000..5e2e70afbc --- /dev/null +++ b/target/linux/rockchip/patches-6.6/400-5-arm64-dts-rockchip-Enable-GPU-on-NanoPi-R6C-R6S.patch @@ -0,0 +1,27 @@ +From 04cd713c3834b87fcd147e4bf7b7066cfe60fffc Mon Sep 17 00:00:00 2001 +From: Sebastian Kropatsch +Date: Wed, 12 Jun 2024 22:48:14 +0200 +Subject: [PATCH 5/5] arm64: dts: rockchip: Enable GPU on NanoPi R6C/R6S + +Enable the Mali GPU on the FriendlyElec NanoPi R6C and R6S. + +Signed-off-by: Sebastian Kropatsch +--- + arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi | 6 ++++++ + 1 file changed, 6 insertions(+) + +--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi ++++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi +@@ -207,6 +207,12 @@ + status = "okay"; + }; + ++&gpu { ++ mali-supply = <&vdd_gpu_s0>; ++ sram-supply = <&vdd_gpu_mem_s0>; ++ status = "okay"; ++}; ++ + &i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0m2_xfer>;