From: Wolfgang Denk <wd@pollux.denx.de>
Date: Sat, 8 Oct 2005 22:33:37 +0000 (+0200)
Subject: Eliminate hard-coded address of Ethernet transfer buffer on at91rm9200
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=95f9dda2165f045a7e1708885ee589878cc6f20b;p=project%2Fbcm63xx%2Fu-boot.git

Eliminate hard-coded address of Ethernet transfer buffer on at91rm9200
Patch by Anders Larsen, 07 Oct 2005

The Atmel errata #11 states that the transfer buffer descriptor
table must be aligned on a 16-word boundary. As it turned out, this
is insufficient - it seems the table must be aligned on a boundary
at least as large as the table itself (in Linux this is not an
issue - the table is aligned on a PAGE_SIZE (4096) boundary).
---

diff --git a/CHANGELOG b/CHANGELOG
index d0676a11e1..496a3b6e67 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,15 @@
 Changes for U-Boot 1.1.4:
 ======================================================================
 
+* Eliminate hard-coded address of Ethernet transfer buffer on at91rm9200
+  Patch by Anders Larsen, 07 Oct 2005
+
+  The Atmel errata #11 states that the transfer buffer descriptor
+  table must be aligned on a 16-word boundary. As it turned out, this
+  is insufficient - it seems the table must be aligned on a boundary
+  at least as large as the table itself (in Linux this is not an
+  issue - the table is aligned on a PAGE_SIZE (4096) boundary).
+
 * Fixed compilation for ARM when using a (standard) hard-FP toolchain
   Patch by Anders Larsen, 07 Oct 2005 
 
diff --git a/board/csb637/config.mk b/board/csb637/config.mk
index 7e1457da88..4c6f631134 100644
--- a/board/csb637/config.mk
+++ b/board/csb637/config.mk
@@ -1 +1 @@
-TEXT_BASE = 0x23fe0000
+TEXT_BASE = 0x23fc0000
diff --git a/cpu/arm920t/at91rm9200/ether.c b/cpu/arm920t/at91rm9200/ether.c
index bff95b6eac..d88517f4b1 100644
--- a/cpu/arm920t/at91rm9200/ether.c
+++ b/cpu/arm920t/at91rm9200/ether.c
@@ -44,21 +44,19 @@ typedef struct {
 #define RBF_LOCAL2    (1<<24)
 #define RBF_LOCAL1    (1<<23)
 
-/* Emac Buffers in last 512KBytes of SDRAM*/
-/* Be careful, buffer size is limited to 512KBytes !!! */
-#define RBF_FRAMEMAX 100
-/*#define RBF_FRAMEMEM 0x200000 */
-#define RBF_FRAMEMEM 0x21F80000
+#define RBF_FRAMEMAX 64
 #define RBF_FRAMELEN 0x600
 
-#define RBF_FRAMEBTD RBF_FRAMEMEM
-#define RBF_FRAMEBUF (RBF_FRAMEMEM + RBF_FRAMEMAX*sizeof(rbf_t))
-
-
 #ifdef CONFIG_DRIVER_ETHER
 
 #if (CONFIG_COMMANDS & CFG_CMD_NET)
 
+/* alignment as per Errata #11 (64 bytes) is insufficient! */
+rbf_t rbfdt[RBF_FRAMEMAX] __attribute((aligned(512)));
+rbf_t *rbfp;
+
+unsigned char rbf_framebuf[RBF_FRAMEMAX][RBF_FRAMELEN] __attribute((aligned(4)));
+
 /* structure to interface the PHY */
 AT91S_PhyOps PhyOps;
 
@@ -153,9 +151,6 @@ UCHAR at91rm9200_EmacWritePhy (AT91PS_EMAC p_mac,
 }
 
 
-rbf_t *rbfdt;
-rbf_t *rbfp;
-
 int eth_init (bd_t * bd)
 {
 	int ret;
@@ -188,9 +183,8 @@ int eth_init (bd_t * bd)
 	p_mac->EMAC_CFG |= AT91C_EMAC_CSR;	/* Clear statistics */
 
 	/* Init Ehternet buffers */
-	rbfdt = (rbf_t *) RBF_FRAMEBTD;
 	for (i = 0; i < RBF_FRAMEMAX; i++) {
-		rbfdt[i].addr = RBF_FRAMEBUF + RBF_FRAMELEN * i;
+		rbfdt[i].addr = rbf_framebuf[i];
 		rbfdt[i].size = 0;
 	}
 	rbfdt[RBF_FRAMEMAX - 1].addr |= RBF_WRAP;