From: Pawel Dembicki Date: Wed, 12 Apr 2023 08:43:43 +0000 (+0200) Subject: mpc85xx: add support for Aerohive BR200-WP X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=95d5a99537a587103976120de0b0ba4d27e07d62;p=openwrt%2Fstaging%2Fxback.git mpc85xx: add support for Aerohive BR200-WP The following adds the Aerohive BR200-WP router to OpenWrt under the mpc85xx/p1010 subtarget. Hardware: - SoC: Freescale P1011 - NOR: Intel JS28F512M29EWH 64MB - Memory: 2x Nanya NT5TU64M16GG-AC 128MB (Total of 256MB) - 2.4GHz WiFi: Atheros AR9390-AL1A - Eth1: Atheros AR8035-A PoE - 2x LEDs - 1x Button - PoE PSE Flashing: 1. Hook into UART (9600 baud) and enter U-Boot. You may need to enter a password of administrator or AhNf?d@ta06 if prompted. 2. Once in U-Boot, tftp boot the initramfs image: dhcp; setenv serverip 192.168.1.3; tftpboot 0x2004000 openwrt-mpc85xx-p1010-aerohive_br200-wp-initramfs-kernel.bin; bootm 0x2004000; 3. Once booted, scp over the sysupgrade file and sysupgrade the device to flash LEDE to the NOR. Note: MAC assigns are taken from stock firmware: Name MAC addr Mode State Chan(Width) VLAN Radio Hive SSID -------- -------------- -------- ----- ----------- ---- ---------- ---------- --------- Mgt0 08ea:44XX:XXc0 - U - 1 - hive0 - Eth0 08ea:44XX:XXc0 wan U - - - - - Eth1 08ea:44XX:XXc2 access D - - - hive0 - Eth2 08ea:44XX:XXc3 access D - - - hive0 - Eth3 08ea:44XX:XXc4 access D - - - hive0 - Eth4 08ea:44XX:XXc5 access D - - - hive0 - Wifi0 08ea:44XX:XXd0 access U 1(20MHz) - radio_ng0 - - Wifi0.1 08ea:44XX:XXd4 access D 1(20MHz) - radio_ng0 hive0 - Note2: PoE PSE could be managed with `realtek-poe` package. Example port config: config port option enable '1' option id '4' option name 'lan2' option poe_plus '0' option priority '2' config port option enable '1' option id '3' option name 'lan1' option poe_plus '0' option priority '1' Signed-off-by: Pawel Dembicki (switch@0 -> switch@10, Device's quickstart says LEDs are amber and white => add function+color properties but keep labels around, use pr_info) Signed-off-by: Christian Lamparter --- diff --git a/target/linux/mpc85xx/base-files/etc/board.d/02_network b/target/linux/mpc85xx/base-files/etc/board.d/02_network index 04c27769a9..41859362b5 100644 --- a/target/linux/mpc85xx/base-files/etc/board.d/02_network +++ b/target/linux/mpc85xx/base-files/etc/board.d/02_network @@ -9,6 +9,9 @@ board_config_update board=$(board_name) case "$board" in +aerohive,br200-wp) + ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan" + ;; aerohive,hiveap-330|\ enterasys,ws-ap3715i) ucidef_set_interfaces_lan_wan "eth1" "eth0" diff --git a/target/linux/mpc85xx/config-5.15 b/target/linux/mpc85xx/config-5.15 index 9c051e63c1..6f7db117d4 100644 --- a/target/linux/mpc85xx/config-5.15 +++ b/target/linux/mpc85xx/config-5.15 @@ -20,6 +20,7 @@ CONFIG_AUDIT_ARCH=y CONFIG_BLK_MQ_PCI=y CONFIG_BOOKE=y CONFIG_BOOKE_WDT=y +# CONFIG_BR200_WP is not set # CONFIG_BSC9131_RDB is not set # CONFIG_BSC9132_QDS is not set # CONFIG_C293_PCIE is not set @@ -58,6 +59,7 @@ CONFIG_EDAC_ATOMIC_SCRUB=y CONFIG_EDAC_LEGACY_SYSFS=y CONFIG_EDAC_MPC85XX=y CONFIG_EDAC_SUPPORT=y +# CONFIG_FIREBOX_T10 is not set CONFIG_FIXED_PHY=y CONFIG_FSL_BOOKE=y # CONFIG_FSL_DPAA2_SWITCH is not set @@ -265,4 +267,3 @@ CONFIG_WATCHDOG_CORE=y # CONFIG_XES_MPC85xx is not set CONFIG_XZ_DEC_BCJ=y CONFIG_XZ_DEC_POWERPC=y -# CONFIG_FIREBOX_T10 is not set diff --git a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/br200-wp.dts b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/br200-wp.dts new file mode 100644 index 0000000000..a4bc10ff38 --- /dev/null +++ b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/br200-wp.dts @@ -0,0 +1,373 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Aerohive BR200-WP Device Tree Source + * + * Based on: Aerohive HiveAP-330 Device Tree Source + * + * Copyright (C) 2017 Chris Blake + * Copyright (C) 2023 Pawel Dembicki + */ + +#include +#include +#include + +/include/ "fsl/p1020si-pre.dtsi" + +/ { + model = "Aerohive BR200-WP"; + compatible = "aerohive,br200-wp"; + + chosen { + bootargs = "console=ttyS0,9600"; + bootargs-override = "console=ttyS0,9600 noinitrd"; + }; + + aliases { + led-boot = &led_attention; + led-failsafe = &led_attention; + led-running = &led_status; + led-upgrade = &led_status; + label-mac-device = &enet0; + }; + + memory { + device_type = "memory"; + }; + + cpus { + /delete-property/ PowerPC,P1020@1; /* P1011 have one core only */ + }; + + board_lbc: lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + ranges = <0x0 0x0 0x0 0xec000000 0x4000000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x4000000>; + bank-width = <2>; + device-width = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0x40000>; + label = "dtb"; + }; + + partition@40000 { + reg = <0x40000 0x40000>; + label = "initramfs"; + }; + + partition@80000 { + reg = <0x80000 0x27c0000>; + label = "rootfs"; + }; + + partition@2840000 { + reg = <0x2840000 0x800000>; + label = "kernel"; + }; + + partition@3040000 { + reg = <0x3040000 0xec0000>; + label = "stock-jffs2"; + read-only; + }; + + partition@3f00000 { + reg = <0x3f00000 0x20000>; + label = "hw-info"; + read-only; + + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_hwinfo_0: macaddr@0 { + reg = <0x0 0x6>; + }; + }; + + partition@3f20000 { + reg = <0x3f20000 0x20000>; + label = "boot-info"; + read-only; + }; + + partition@3f40000 { + reg = <0x3f40000 0x20000>; + label = "boot-info-backup"; + read-only; + }; + + partition@3f60000 { + reg = <0x3f60000 0x20000>; + label = "u-boot-env"; + }; + + partition@3f80000 { + reg = <0x3f80000 0x80000>; + label = "u-boot"; + read-only; + }; + + firmware@0 { + reg = <0x0 0x3040000>; + label = "firmware"; + }; + }; + }; + }; + + board_soc: soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + + mdio@24000 { + + phy_port1: phy@0 { + reg = <0>; + }; + + phy_port2: phy@1 { + reg = <1>; + }; + + phy_port3: phy@2 { + reg = <2>; + }; + + phy_port4: phy@3 { + reg = <3>; + }; + + phy_port5: phy@4 { + reg = <4>; + }; + + switch@10 { + compatible = "qca,qca8327"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10>; + reset-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + label = "lan1"; + phy-handle = <&phy_port1>; + nvmem-cells = <&macaddr_hwinfo_0>; + nvmem-cell-names = "mac-address"; + mac-address-increment = <2>; + }; + + port@2 { + reg = <2>; + label = "lan2"; + phy-handle = <&phy_port2>; + nvmem-cells = <&macaddr_hwinfo_0>; + nvmem-cell-names = "mac-address"; + mac-address-increment = <3>; + }; + + port@3 { + reg = <3>; + label = "lan3"; + phy-handle = <&phy_port3>; + nvmem-cells = <&macaddr_hwinfo_0>; + nvmem-cell-names = "mac-address"; + mac-address-increment = <4>; + }; + + port@4 { + reg = <4>; + label = "lan4"; + phy-handle = <&phy_port4>; + nvmem-cells = <&macaddr_hwinfo_0>; + nvmem-cell-names = "mac-address"; + mac-address-increment = <5>; + }; + + port@5 { + reg = <5>; + label = "wan"; + phy-handle = <&phy_port5>; + nvmem-cells = <&macaddr_hwinfo_0>; + nvmem-cell-names = "mac-address"; + }; + + port@6 { + reg = <6>; + ethernet = <&enet0>; + phy-mode = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; + + mdio@25000 { + status = "disabled"; + }; + + mdio@26000 { + status = "disabled"; + }; + + enet0: ethernet@b0000 { + status = "okay"; + phy-connection-type = "rgmii-id"; + nvmem-cells = <&macaddr_hwinfo_0>; + nvmem-cell-names = "mac-address"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + enet1: ethernet@b1000 { + status = "disabled"; + }; + + enet2: ethernet@b2000 { + status = "disabled"; + }; + + gpio0: gpio-controller@fc00 { + }; + + usb@22000 { + phy_type = "ulpi"; + dr_mode = "host"; + }; + + usb@23000 { + status = "disabled"; + }; + }; + + pci0: pcie@ffe09000 { + status = "disabled"; + }; + + pci1: pcie@ffe0a000 { + reg = <0x0 0xffe0a000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0x0 0xffc20000 0x0 0x10000>; + + reset-gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + + ath9k: wifi@0,0 { + reg = <0x0000 0 0 0 0>; + #gpio-cells = <2>; + gpio-controller; + nvmem-cells = <&macaddr_hwinfo_0>; + nvmem-cell-names = "mac-address"; + mac-address-increment = <16>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_attention: led-0 { + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + label = "amber:status"; + color = ; + function = LED_FUNCTION_STATUS; + }; + + led_status: led-1 { + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + label = "white:status"; + color = ; + function = LED_FUNCTION_STATUS; + }; + }; + + buttons { + compatible = "gpio-keys"; + + reset { + label = "Reset button"; + gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +/include/ "fsl/p1020si-post.dtsi" + +/ { + chosen { + linux,stdout-path = "/soc@ffe00000/serial@4500"; + }; + + cpus { + PowerPC,P1020@0 { + i-cache-sets = <0x80>; + i-cache-size = <0x8000>; + i-cache-block-size = <0x20>; + d-cache-sets = <0x80>; + d-cache-size = <0x8000>; + d-cache-block-size = <0x20>; + clock-frequency = <0x2756cd00>; + bus-frequency = <0x13ab6680>; + timebase-frequency = <0x2756cd0>; + }; + }; + + memory { + reg = <0x00 0x00 0x00 0x10000000>; + }; + + localbus@ffe05000 { + bus-frequency = <0x13ab668>; + }; + + soc@ffe00000 { + bus-frequency = <0x13ab6680>; + + serial@4500 { + clock-frequency = <0x13ab6680>; + }; + + serial@4600 { + clock-frequency = <0x13ab6680>; + }; + }; + + pcie@ffe09000 { + clock-frequency = <0x1fca055>; + }; + + pcie@ffe0a000 { + clock-frequency = <0x1fca055>; + }; +}; diff --git a/target/linux/mpc85xx/files/arch/powerpc/platforms/85xx/br200-wp.c b/target/linux/mpc85xx/files/arch/powerpc/platforms/85xx/br200-wp.c new file mode 100644 index 0000000000..23fd11a5c6 --- /dev/null +++ b/target/linux/mpc85xx/files/arch/powerpc/platforms/85xx/br200-wp.c @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Aerohive BR200-WP Board Setup + * Copyright (C) 2023 Pawel Dembicki + * + * Based on: + * hiveap-330.c: + * Aerohive HiveAP-330 Board Setup + * Copyright (C) 2017 Chris Blake + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include "smp.h" + +#include "mpc85xx.h" + +void __init br200_wp_pic_init(void) +{ + struct mpic *mpic; + + mpic = mpic_alloc(NULL, 0, + MPIC_BIG_ENDIAN | + MPIC_SINGLE_DEST_CPU, + 0, 256, " OpenPIC "); + + BUG_ON(mpic == NULL); + mpic_init(mpic); +} + +/* + * Setup the architecture + */ +static void __init br200_wp_setup_arch(void) +{ + if (ppc_md.progress) + ppc_md.progress("br200_wp_setup_arch()", 0); + + fsl_pci_assign_primary(); + + pr_info("br200-wp board from Aerohive\n"); +} + +machine_arch_initcall(br200_wp, mpc85xx_common_publish_devices); + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init br200_wp_probe(void) +{ + if (of_machine_is_compatible("aerohive,br200-wp")) + return 1; + return 0; +} + +define_machine(br200_wp) { + .name = "P1020 RDB", + .probe = br200_wp_probe, + .setup_arch = br200_wp_setup_arch, + .init_IRQ = br200_wp_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, + .pcibios_fixup_phb = fsl_pcibios_fixup_phb, +#endif + .get_irq = mpic_get_irq, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/target/linux/mpc85xx/image/p1010.mk b/target/linux/mpc85xx/image/p1010.mk index 034f6abc40..c0de19f6c6 100644 --- a/target/linux/mpc85xx/image/p1010.mk +++ b/target/linux/mpc85xx/image/p1010.mk @@ -14,6 +14,26 @@ define Build/spi-loader-okli mv "$@.new" "$@" endef +define Device/aerohive_br200-wp + DEVICE_VENDOR := Aerohive + DEVICE_MODEL := BR200-WP + BLOCKSIZE := 128k + KERNEL_NAME := simpleImage.br200-wp + KERNEL := kernel-bin | uImage none + KERNEL_INITRAMFS := kernel-bin | uImage none + KERNEL_ENTRY := 0x1000000 + KERNEL_LOADADDR := 0x1000000 + KERNEL_SIZE := 8m + IMAGES := fdt.bin sysupgrade.bin + IMAGE/fdt.bin := append-dtb + IMAGE/sysupgrade.bin := append-dtb | pad-to 256k | check-size 256k | \ + append-uImage-fakehdr ramdisk | pad-to 256k | check-size 512k | \ + append-rootfs | pad-rootfs $$(BLOCKSIZE) | pad-to 41216k | check-size 41216k | \ + append-kernel | append-metadata + IMAGE_SIZE = 63m +endef +TARGET_DEVICES += aerohive_br200-wp + define Device/enterasys_ws-ap3715i DEVICE_VENDOR := Enterasys DEVICE_MODEL := WS-AP3715i diff --git a/target/linux/mpc85xx/p1010/config-default b/target/linux/mpc85xx/p1010/config-default index 6af6b8e097..b6d483cd80 100644 --- a/target/linux/mpc85xx/p1010/config-default +++ b/target/linux/mpc85xx/p1010/config-default @@ -1,8 +1,12 @@ CONFIG_AT803X_PHY=y +CONFIG_BR200_WP=y CONFIG_CMDLINE_OVERRIDE=y +CONFIG_FIREBOX_T10=y # CONFIG_FSL_CORENET_CF is not set CONFIG_GPIO_74X164=y +CONFIG_MTD_CFI=y CONFIG_MTD_NAND_FSL_IFC=y +CONFIG_MTD_PHYSMAP=y CONFIG_MTD_SPLIT_FIRMWARE=y CONFIG_MTD_SPLIT_TPLINK_FW=y CONFIG_MTD_SPLIT_UIMAGE_FW=y @@ -24,4 +28,3 @@ CONFIG_SPI_GPIO=y CONFIG_TL_WDR4900_V1=y CONFIG_UBIFS_FS=y CONFIG_WS_AP3715I=y -CONFIG_FIREBOX_T10=y \ No newline at end of file diff --git a/target/linux/mpc85xx/p1010/target.mk b/target/linux/mpc85xx/p1010/target.mk index fa1bb7542d..6b54390863 100644 --- a/target/linux/mpc85xx/p1010/target.mk +++ b/target/linux/mpc85xx/p1010/target.mk @@ -1,5 +1,5 @@ BOARDNAME:=P1010 -KERNEL_IMAGES:=simpleImage.tl-wdr4900-v1 simpleImage.ws-ap3715i +KERNEL_IMAGES:=simpleImage.br200-wp simpleImage.tl-wdr4900-v1 simpleImage.ws-ap3715i define Target/Description Build firmware images for P1010 based boards. diff --git a/target/linux/mpc85xx/patches-5.15/110-powerpc-85xx-br200-wp-support.patch b/target/linux/mpc85xx/patches-5.15/110-powerpc-85xx-br200-wp-support.patch new file mode 100644 index 0000000000..8d510759dc --- /dev/null +++ b/target/linux/mpc85xx/patches-5.15/110-powerpc-85xx-br200-wp-support.patch @@ -0,0 +1,57 @@ +--- a/arch/powerpc/platforms/85xx/Kconfig ++++ b/arch/powerpc/platforms/85xx/Kconfig +@@ -49,6 +49,16 @@ config BSC9132_QDS + and dual StarCore SC3850 DSP cores. + Manufacturer : Freescale Semiconductor, Inc + ++config BR200_WP ++ bool "Aerohive BR200-WP" ++ select DEFAULT_UIMAGE ++ select ARCH_REQUIRE_GPIOLIB ++ select GPIO_MPC8XXX ++ help ++ This option enables support for the Aerohive BR200-WP board. ++ ++ This board is a wireless router with a Freescale P1011 SoC. ++ + config HIVEAP_330 + bool "Aerohive HiveAP-330" + select DEFAULT_UIMAGE +--- a/arch/powerpc/platforms/85xx/Makefile ++++ b/arch/powerpc/platforms/85xx/Makefile +@@ -12,6 +12,7 @@ obj-y += common.o + obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o + obj-$(CONFIG_BSC9132_QDS) += bsc913x_qds.o + obj-$(CONFIG_C293_PCIE) += c293pcie.o ++obj-$(CONFIG_BR200_WP) += br200-wp.o + obj-$(CONFIG_HIVEAP_330) += hiveap-330.o + obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o + obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o +--- a/arch/powerpc/boot/Makefile ++++ b/arch/powerpc/boot/Makefile +@@ -163,6 +163,7 @@ src-plat-$(CONFIG_PPC_PSERIES) += pserie + src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S + src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S + src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c ++src-plat-$(CONFIG_BR200_WP) += simpleboot.c fixed-head.S + src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S + src-plat-$(CONFIG_WS_AP3825I) += simpleboot.c fixed-head.S + +@@ -345,6 +346,7 @@ image-$(CONFIG_TQM8548) += cuImage.tqm + image-$(CONFIG_TQM8555) += cuImage.tqm8555 + image-$(CONFIG_TQM8560) += cuImage.tqm8560 + image-$(CONFIG_KSI8560) += cuImage.ksi8560 ++image-$(CONFIG_BR200_WP) += simpleImage.br200-wp + image-$(CONFIG_TL_WDR4900_V1) += simpleImage.tl-wdr4900-v1 + image-$(CONFIG_WS_AP3715I) += simpleImage.ws-ap3715i + image-$(CONFIG_WS_AP3825I) += simpleImage.ws-ap3825i +--- a/arch/powerpc/boot/wrapper ++++ b/arch/powerpc/boot/wrapper +@@ -326,6 +326,7 @@ adder875-redboot) + platformo="$object/fixed-head.o $object/redboot-8xx.o" + binary=y + ;; ++simpleboot-br200-wp|\ + simpleboot-ws-ap3715i|\ + simpleboot-ws-ap3825i|\ + simpleboot-tl-wdr4900-v1) diff --git a/target/linux/mpc85xx/patches-5.15/900-powerpc-bootwrapper-disable-uImage-generation.patch b/target/linux/mpc85xx/patches-5.15/900-powerpc-bootwrapper-disable-uImage-generation.patch index 66935c04b7..1af5aefe0b 100644 --- a/target/linux/mpc85xx/patches-5.15/900-powerpc-bootwrapper-disable-uImage-generation.patch +++ b/target/linux/mpc85xx/patches-5.15/900-powerpc-bootwrapper-disable-uImage-generation.patch @@ -16,7 +16,7 @@ Signed-off-by: David Bauer --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile -@@ -273,7 +273,6 @@ image-$(CONFIG_PPC_CHRP) += zImage.chrp +@@ -274,7 +274,6 @@ image-$(CONFIG_PPC_CHRP) += zImage.chrp image-$(CONFIG_PPC_EFIKA) += zImage.chrp image-$(CONFIG_PPC_PMAC) += zImage.pmac image-$(CONFIG_PPC_HOLLY) += dtbImage.holly @@ -24,7 +24,7 @@ Signed-off-by: David Bauer image-$(CONFIG_EPAPR_BOOT) += zImage.epapr # -@@ -407,15 +406,6 @@ $(obj)/dtbImage.%: vmlinux $(wrapperbits +@@ -409,15 +408,6 @@ $(obj)/dtbImage.%: vmlinux $(wrapperbits $(obj)/vmlinux.strip: vmlinux $(STRIP) -s -R .comment $< -o $@