From: Sungbo Eo Date: Sat, 1 Jan 2022 12:00:36 +0000 (+0900) Subject: kirkwood: add support for ipTIME NAS1 X-Git-Tag: v22.03.0-rc1~638 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=957f9adeb1f8ec5de8d73e183dec267dbc6dc8bb;p=openwrt%2Fstaging%2Fpepe2k.git kirkwood: add support for ipTIME NAS1 ipTIME NAS1 is a 1-bay NAS, based on Marvell Kirkwood SoC. Specifications: * SoC: 88F6281 * RAM: 256 MiB * Flash: SPI NOR 16 MiB * SATA: 1x 3Gb/s * Ethernet: 1x 1GbE * USB: 1x 2.0 * Fan: 2 speed level * UART: JP1 (115200 8N1) * Pinout: [3V3] (TXD) (RXD) (GND) Notes: * There are several variants of the model name: "NAS-I", "NASI", "NAS1". Here "NAS1" is adopted for consistent naming scheme. * The reset button is also a USB copy button in stock FW, but in this patch the former is the only default behavior. Installation via web interface: 1. Flash sysupgrade image through the stock web interface. Revert to stock firmware: 1. Perform sysupgrade with stock image. Signed-off-by: Sungbo Eo --- diff --git a/include/image-commands.mk b/include/image-commands.mk index 158af853a5..eda3fee94b 100644 --- a/include/image-commands.mk +++ b/include/image-commands.mk @@ -295,6 +295,11 @@ define Build/install-dtb ) endef +define Build/iptime-naspkg + $(STAGING_DIR_HOST)/bin/iptime-naspkg $(1) $@ $@.new + mv $@.new $@ +endef + define Build/jffs2 rm -rf $(KDIR_TMP)/$(DEVICE_NAME)/jffs2 && \ mkdir -p $(KDIR_TMP)/$(DEVICE_NAME)/jffs2/$$(dirname $(1)) && \ diff --git a/target/linux/kirkwood/base-files/etc/board.d/02_network b/target/linux/kirkwood/base-files/etc/board.d/02_network index 773730e642..df38694f40 100644 --- a/target/linux/kirkwood/base-files/etc/board.d/02_network +++ b/target/linux/kirkwood/base-files/etc/board.d/02_network @@ -22,6 +22,7 @@ kirkwood_setup_interfaces() globalscale,sheevaplug|\ iom,iconnect-1.1|\ iom,ix2-200|\ + iptime,nas1|\ netgear,readynas-duo-v2|\ raidsonic,ib-nas62x0|\ seagate,blackarmor-nas220|\ @@ -55,6 +56,10 @@ kirkwood_setup_macs() local label_mac="" case "$board" in + iptime,nas1) + lan_mac=$(mtd_get_mac_binary u-boot 0x3ffa8) + label_mac=$lan_mac + ;; linksys,e4200-v2|\ linksys,ea3500|\ linksys,ea4500) diff --git a/target/linux/kirkwood/base-files/lib/preinit/07_set_iface_mac b/target/linux/kirkwood/base-files/lib/preinit/07_set_iface_mac index 2a52b7962f..393c540d97 100644 --- a/target/linux/kirkwood/base-files/lib/preinit/07_set_iface_mac +++ b/target/linux/kirkwood/base-files/lib/preinit/07_set_iface_mac @@ -27,6 +27,10 @@ preinit_set_mac_address() { ip link set dev port3 address $(macaddr_add $mac 2) 2>/dev/null ip link set dev port4 address $(macaddr_add $mac 3) 2>/dev/null ;; + iptime,nas1) + mac=$(mtd_get_mac_binary u-boot 0x3ffa8) + ip link set dev eth0 address $mac 2>/dev/null + ;; esac } diff --git a/target/linux/kirkwood/base-files/lib/upgrade/platform.sh b/target/linux/kirkwood/base-files/lib/upgrade/platform.sh index e2f6dec44a..9885bf7d31 100644 --- a/target/linux/kirkwood/base-files/lib/upgrade/platform.sh +++ b/target/linux/kirkwood/base-files/lib/upgrade/platform.sh @@ -1,6 +1,7 @@ RAMFS_COPY_BIN='fw_printenv fw_setenv strings' RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock' +PART_NAME=firmware REQUIRE_IMAGE_METADATA=1 platform_check_image() { @@ -33,6 +34,9 @@ platform_do_upgrade() { return 1 fi ;; + iptime,nas1) + default_do_upgrade "$1" + ;; linksys,e4200-v2|\ linksys,ea3500|\ linksys,ea4500) diff --git a/target/linux/kirkwood/config-5.10 b/target/linux/kirkwood/config-5.10 index f80a7d8f20..ae9c3b0999 100644 --- a/target/linux/kirkwood/config-5.10 +++ b/target/linux/kirkwood/config-5.10 @@ -122,6 +122,7 @@ CONFIG_HARDIRQS_SW_RESEND=y CONFIG_HAS_DMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT_MAP=y +CONFIG_HWMON=y CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_OMAP=y CONFIG_HZ_FIXED=0 @@ -163,6 +164,9 @@ CONFIG_MTD_NAND_ECC_SW_HAMMING=y # CONFIG_MTD_NAND_MARVELL is not set CONFIG_MTD_NAND_ORION=y CONFIG_MTD_RAW_NAND=y +CONFIG_MTD_SPI_NOR=y +CONFIG_MTD_SPLIT_FIRMWARE=y +CONFIG_MTD_SPLIT_UIMAGE_FW=y CONFIG_MTD_UBI=y CONFIG_MTD_UBI_BEB_LIMIT=20 CONFIG_MTD_UBI_BLOCK=y @@ -248,6 +252,7 @@ CONFIG_SPARSE_IRQ=y CONFIG_SPI=y # CONFIG_SPI_ARMADA_3700 is not set CONFIG_SPI_MASTER=y +CONFIG_SPI_MEM=y CONFIG_SPI_ORION=y CONFIG_SPLIT_PTLOCK_CPUS=999999 CONFIG_SRAM=y @@ -259,6 +264,7 @@ CONFIG_THERMAL=y CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 CONFIG_THERMAL_GOV_STEP_WISE=y +CONFIG_THERMAL_HWMON=y CONFIG_THERMAL_OF=y CONFIG_TICK_CPU_ACCOUNTING=y CONFIG_TIMER_OF=y diff --git a/target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-nas1.dts b/target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-nas1.dts new file mode 100644 index 0000000000..a8d86406b5 --- /dev/null +++ b/target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-nas1.dts @@ -0,0 +1,231 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" + +/ { + model = "ipTIME NAS1"; + compatible = "iptime,nas1", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + aliases { + serial0 = &uart0; + led-boot = &led_ready; + led-failsafe = &led_ready; + led-running = &led_ready; + led-upgrade = &led_ready; + }; + + chosen { + /* + * "root" argument from the stock bootloader should be ignored + * as it'll prevent the kernel from finding the correct rootfs. + */ + bootargs-append = " console=ttyS0,115200 root="; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + gpio-leds { + compatible = "gpio-leds"; + + pinctrl-0 = <&pmx_led>; + pinctrl-names = "default"; + + hdd { + label = "blue:hdd"; + gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "ata1"; + }; + + usb { + label = "blue:usb"; + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + trigger-sources = <&ehci_port1>; + linux,default-trigger = "usbport"; + }; + + led_ready: ready { + label = "blue:ready"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&pmx_button>; + pinctrl-names = "default"; + + reset-copy { + label = "Reset/Copy Button"; + linux,code = ; + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + }; + + power { + label = "Power Button"; + linux,code = ; + gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-fan { + compatible = "gpio-fan"; + + pinctrl-0 = <&pmx_fan>; + pinctrl-names = "default"; + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>, + <&gpio1 10 GPIO_ACTIVE_HIGH>; + /* We don't know the exact rpm, just use dummy values here. */ + gpio-fan,speed-map = <0 0>, <1 1>, <2 2>; + #cooling-cells = <2>; + }; + + gpio-poweroff { + compatible = "gpio-poweroff"; + gpios = <&pca9536 0 GPIO_ACTIVE_LOW>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&pmx_usb_vbus>; + pinctrl-names = "default"; + + regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&pinctrl { + pmx_led: pmx-led { + marvell,pins = "mpp35", "mpp45", "mpp46"; + marvell,function = "gpio"; + }; + + pmx_fan: pmx-fan { + marvell,pins = "mpp41", "mpp42"; + marvell,function = "gpio"; + }; + + pmx_usb_vbus: pmx-usb-vbus { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + + pmx_button: pmx-button { + marvell,pins = "mpp44", "mpp48"; + marvell,function = "gpio"; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x40000>; + read-only; + }; + + partition@40000 { + compatible = "openwrt,uimage", "denx,uimage"; + openwrt,offset = <0x400>; + label = "firmware"; + reg = <0x40000 0xf80000>; + }; + + partition@fc0000 { + label = "config"; + reg = <0xfc0000 0x40000>; + read-only; + }; + }; + }; +}; + +&rtc { + status = "disabled"; +}; + +&i2c0 { + status = "okay"; + + pca9536: gpio@41 { + compatible = "nxp,pca9536"; + reg = <0x41>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&uart0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + ehci_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; +}; + +&mdio { + status = "okay"; + + ethphyb: ethernet-phy@b { + reg = <0x0b>; + }; +}; + +ð1 { + status = "okay"; +}; + +ð1port { + phy-handle = <ðphyb>; + phy-connection-type = "rgmii-id"; +}; + +&sata { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + nr-ports = <1>; + + sata-port@0 { + reg = <0>; + #thermal-sensor-cells = <0>; + }; +}; diff --git a/target/linux/kirkwood/image/Makefile b/target/linux/kirkwood/image/Makefile index 4a2ca8d68e..60e8654ad3 100644 --- a/target/linux/kirkwood/image/Makefile +++ b/target/linux/kirkwood/image/Makefile @@ -184,6 +184,21 @@ define Device/iom_ix2-200 endef TARGET_DEVICES += iom_ix2-200 +define Device/iptime_nas1 + DEVICE_VENDOR := ipTIME + DEVICE_MODEL := NAS1 + DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \ + kmod-gpio-button-hotplug kmod-gpio-pca953x kmod-hwmon-drivetemp \ + kmod-hwmon-gpiofan kmod-usb-ledtrig-usbport -uboot-envtools + KERNEL := $$(KERNEL) | iptime-naspkg nas1 + BLOCKSIZE := 256k + IMAGE_SIZE := 15872k + IMAGES := sysupgrade.bin + IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \ + check-size | append-metadata +endef +TARGET_DEVICES += iptime_nas1 + define Device/linksys DEVICE_VENDOR := Linksys DEVICE_PACKAGES := kmod-mwl8k wpad-basic-wolfssl kmod-gpio-button-hotplug