From: Daniel Golle Date: Sun, 10 Dec 2023 23:09:00 +0000 (+0000) Subject: mediatek: bananapi-r3: add overlay for ReSpeaker 2-mic hat X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=957a0921e20257bd94b7f5ace6e07a68e8388499;p=openwrt%2Fstaging%2Fnbd.git mediatek: bananapi-r3: add overlay for ReSpeaker 2-mic hat Add DT overlay to allow using the ReSpeaker 2-mic hat connected to the 26-pin header of the BananaPi BPi-R3. Supported sample formats: S16_LE, S24_LE, S32_LE Supported sample rates: 8/12/16/24/32/48/96/192 kHz | BPi-R3 | ReSpeaker 2-mic Signal | 26-pin | 40-pin ----------+----------+------------------- VCC 5V | 2 | 2 I2C SDA | 3 | 3 I2C SCL | 5 | 5 GND | 6 | 6 PCM CLK | 12 | 12 PCM FS | 15 | 35 PCM DIN | 26 | 38 GND | 25 | 39 PCM DOUT | 22 | 40 Once connected, install the driver and tell U-Boot to apply the DT overlay: opkg kmod-sound-soc-mt7986-wm8960 fw_setenv bootconf_base "config-mt7986a-bananapi-bpi-r3#mt7986a-bananapi-bpi-r3-respeaker-2mics" reboot To setup the ReSpeaker for Stereo out on the Headphone plug: amixer sset 'Right Output Mixer PCM' on amixer sset 'Left Output Mixer PCM' on amixer sset 'PCM Playback -6dB' off amixer sset 'O018 I150_Switch' on amixer sset 'O019 I151_Switch' on amixer sset 'O124 I032_Switch' on amixer sset 'O125 I033_Switch' on amixer sset 'Headphone' 121 amixer sset 'Playback' 255 Signed-off-by: Daniel Golle --- diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index 36333bb926..7af96674d9 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -212,7 +212,9 @@ define Device/bananapi_bpi-r3 DEVICE_MODEL := BPi-R3 DEVICE_DTS := mt7986a-bananapi-bpi-r3 DEVICE_DTS_CONFIG := config-mt7986a-bananapi-bpi-r3 - DEVICE_DTS_OVERLAY:= mt7986a-bananapi-bpi-r3-emmc mt7986a-bananapi-bpi-r3-nand mt7986a-bananapi-bpi-r3-nor mt7986a-bananapi-bpi-r3-sd + DEVICE_DTS_OVERLAY:= mt7986a-bananapi-bpi-r3-emmc mt7986a-bananapi-bpi-r3-nand \ + mt7986a-bananapi-bpi-r3-nor mt7986a-bananapi-bpi-r3-sd \ + mt7986a-bananapi-bpi-r3-respeaker-2mics DEVICE_DTS_DIR := $(DTS_DIR)/ DEVICE_DTS_LOADADDR := 0x43f00000 DEVICE_PACKAGES := kmod-hwmon-pwmfan kmod-i2c-gpio kmod-mt7986-firmware kmod-sfp kmod-usb3 e2fsprogs f2fsck mkf2fs mt7986-wo-firmware diff --git a/target/linux/mediatek/patches-5.15/864-arm64-dts-mt7986-add-sound-overlay-for-bpi-r3.patch b/target/linux/mediatek/patches-5.15/864-arm64-dts-mt7986-add-sound-overlay-for-bpi-r3.patch new file mode 100644 index 0000000000..4fc12bf402 --- /dev/null +++ b/target/linux/mediatek/patches-5.15/864-arm64-dts-mt7986-add-sound-overlay-for-bpi-r3.patch @@ -0,0 +1,65 @@ +--- /dev/null ++++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-respeaker-2mics.dtso +@@ -0,0 +1,62 @@ ++// SPDX-License-Identifier: (GPL-2.0 OR MIT) ++/* ++ * Copyright (C) 2023 MediaTek Inc. ++ * Author: Maso Huang ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "bananapi,bpi-r3", "mediatek,mt7986a"; ++ ++ fragment@0 { ++ target-path = "/"; ++ __overlay__ { ++ sound_wm8960 { ++ compatible = "mediatek,mt7986-wm8960-sound"; ++ audio-routing = "Headphone", "HP_L", ++ "Headphone", "HP_R", ++ "LINPUT1", "AMIC", ++ "RINPUT1", "AMIC"; ++ ++ status = "okay"; ++ ++ platform { ++ sound-dai = <&afe>; ++ }; ++ ++ codec { ++ sound-dai = <&wm8960>; ++ }; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c0>; ++ __overlay__ { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c_pins>; ++ clock-frequency = <400000>; ++ status = "okay"; ++ ++ wm8960: wm8960@1a { ++ compatible = "wlf,wm8960"; ++ reg = <0x1a>; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&pio>; ++ __overlay__ { ++ i2c_pins: i2c-pins-3-4 { ++ mux { ++ function = "i2c"; ++ groups = "i2c"; ++ }; ++ }; ++ }; ++ }; ++}; diff --git a/target/linux/mediatek/patches-6.1/864-arm64-dts-mt7986-add-sound-overlay-for-bpi-r3.patch b/target/linux/mediatek/patches-6.1/864-arm64-dts-mt7986-add-sound-overlay-for-bpi-r3.patch new file mode 100644 index 0000000000..bddcd4bb0c --- /dev/null +++ b/target/linux/mediatek/patches-6.1/864-arm64-dts-mt7986-add-sound-overlay-for-bpi-r3.patch @@ -0,0 +1,75 @@ +--- /dev/null ++++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-respeaker-2mics.dtso +@@ -0,0 +1,62 @@ ++// SPDX-License-Identifier: (GPL-2.0 OR MIT) ++/* ++ * Copyright (C) 2023 MediaTek Inc. ++ * Author: Maso Huang ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "bananapi,bpi-r3", "mediatek,mt7986a"; ++ ++ fragment@0 { ++ target-path = "/"; ++ __overlay__ { ++ sound_wm8960 { ++ compatible = "mediatek,mt7986-wm8960-sound"; ++ audio-routing = "Headphone", "HP_L", ++ "Headphone", "HP_R", ++ "LINPUT1", "AMIC", ++ "RINPUT1", "AMIC"; ++ ++ status = "okay"; ++ ++ platform { ++ sound-dai = <&afe>; ++ }; ++ ++ codec { ++ sound-dai = <&wm8960>; ++ }; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c0>; ++ __overlay__ { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c_pins>; ++ clock-frequency = <400000>; ++ status = "okay"; ++ ++ wm8960: wm8960@1a { ++ compatible = "wlf,wm8960"; ++ reg = <0x1a>; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&pio>; ++ __overlay__ { ++ i2c_pins: i2c-pins-3-4 { ++ mux { ++ function = "i2c"; ++ groups = "i2c"; ++ }; ++ }; ++ }; ++ }; ++}; +--- a/arch/arm64/boot/dts/mediatek/Makefile ++++ b/arch/arm64/boot/dts/mediatek/Makefile +@@ -12,6 +12,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-b + dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nand.dtbo + dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nor.dtbo + dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sd.dtbo ++dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-respeaker-2mics.dtbo + dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-rfb.dtb + dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986b-rfb.dtb + dtb-$(CONFIG_ARCH_MEDIATEK) += mt8167-pumpkin.dtb