From: Ben Skeggs Date: Wed, 17 Feb 2016 22:14:19 +0000 (+1000) Subject: drm/nouveau/disp/dp: ensure sink is powered up before attempting link training X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=95664e66fad964c3dd7945d6edfb1d0931844664;p=openwrt%2Fstaging%2Fblogic.git drm/nouveau/disp/dp: ensure sink is powered up before attempting link training This can happen under some annoying circumstances, and is a quick fix until more substantial changes can be made. Fixed eDP mode changes on (at least) the Lenovo P50. Signed-off-by: Ben Skeggs Cc: stable@vger.kernel.org --- diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/disp/dport.c b/drivers/gpu/drm/nouveau/nvkm/engine/disp/dport.c index 74e2f7c6c07e..9688970eca47 100644 --- a/drivers/gpu/drm/nouveau/nvkm/engine/disp/dport.c +++ b/drivers/gpu/drm/nouveau/nvkm/engine/disp/dport.c @@ -328,6 +328,7 @@ nvkm_dp_train(struct work_struct *w) .outp = outp, }, *dp = &_dp; u32 datarate = 0; + u8 pwr; int ret; if (!outp->base.info.location && disp->func->sor.magic) @@ -355,6 +356,15 @@ nvkm_dp_train(struct work_struct *w) /* disable link interrupt handling during link training */ nvkm_notify_put(&outp->irq); + /* ensure sink is not in a low-power state */ + if (!nvkm_rdaux(outp->aux, DPCD_SC00, &pwr, 1)) { + if ((pwr & DPCD_SC00_SET_POWER) != DPCD_SC00_SET_POWER_D0) { + pwr &= ~DPCD_SC00_SET_POWER; + pwr |= DPCD_SC00_SET_POWER_D0; + nvkm_wraux(outp->aux, DPCD_SC00, &pwr, 1); + } + } + /* enable down-spreading and execute pre-train script from vbios */ dp_link_train_init(dp, outp->dpcd[3] & 0x01); diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/disp/dport.h b/drivers/gpu/drm/nouveau/nvkm/engine/disp/dport.h index 9596290329c7..6e10c5e0ef11 100644 --- a/drivers/gpu/drm/nouveau/nvkm/engine/disp/dport.h +++ b/drivers/gpu/drm/nouveau/nvkm/engine/disp/dport.h @@ -71,5 +71,11 @@ #define DPCD_LS0C_LANE1_POST_CURSOR2 0x0c #define DPCD_LS0C_LANE0_POST_CURSOR2 0x03 +/* DPCD Sink Control */ +#define DPCD_SC00 0x00600 +#define DPCD_SC00_SET_POWER 0x03 +#define DPCD_SC00_SET_POWER_D0 0x01 +#define DPCD_SC00_SET_POWER_D3 0x03 + void nvkm_dp_train(struct work_struct *); #endif