From: Waldemar Brodkorb Date: Fri, 15 Jul 2005 15:57:45 +0000 (+0000) Subject: unrelated or old X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=955817269cdac5caa41ae939066aeb2bc608cd11;p=openwrt%2Fstaging%2Fstintel.git unrelated or old SVN-Revision: 1440 --- diff --git a/openwrt/docs/CHANGES b/openwrt/docs/CHANGES deleted file mode 100644 index 56fd703399..0000000000 --- a/openwrt/docs/CHANGES +++ /dev/null @@ -1,29 +0,0 @@ - - OpenWRT CHANGES - --------------- - - Changes between official and experimental - - *) new buildroot (based on uClib buildroot2) - *) makefiles are no longer included but executed instead - => easier to create packages - - *) enhanced configuration system - *) busybox fully configurable from menuconfig - *) enabled tristate for some packages - => < > disabled, compile as .ipk, <*> compile as .ipk and embed - - *) new kernel (updated to 2.4.30) - - *) jffs2 root partition support - - *) lzma compression (kernel and squashfs root partition) - - *) newest ebtables support - - *) better support for Asus WL-500g / WL-500g deluxe - (kernel modules for usb,scsi,vfat build) - - *) all free kernel source added to cvs for better maintainence - - *) free replacements for mtd and wl tool (wl is renamed to wlc) diff --git a/openwrt/docs/README b/openwrt/docs/README deleted file mode 100644 index 0c7fb4cd4b..0000000000 --- a/openwrt/docs/README +++ /dev/null @@ -1,18 +0,0 @@ -To build and use the buildroot stuff, do the following: - -1) run 'make' -2) select which packages you wish to compile -3) run 'make' -4) wait while it compiles -5) Use your shiney new root filesystem. Depending on which sortof - root filesystem you selecter, you may want to loop mount it, - chroot into it, loop mount it and then nfs mount that on your - target device, burn it to flash, or whatever is appropriate - for your target system. - -You do not need to be root to build or run buildroot. Have fun! - - -Erik - -Please feed suggestions, bug reports, insults, and bribes back to: - Erik Andersen