From: Sujith Date: Tue, 3 Mar 2009 04:46:53 +0000 (+0530) Subject: ath9k: Cleanup beacon stuck processing X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=9546aae0863c12a3d00b1ed5cbd316520733200b;p=openwrt%2Fstaging%2Fblogic.git ath9k: Cleanup beacon stuck processing We never use SC_OP_NO_RESET, it is not configurable at all. Remove all code that deals with this flag and make beacon stuck processing simple. Signed-off-by: Sujith Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/ath9k/ath9k.h b/drivers/net/wireless/ath9k/ath9k.h index f74ed7af31e0..f5d099f0ab4c 100644 --- a/drivers/net/wireless/ath9k/ath9k.h +++ b/drivers/net/wireless/ath9k/ath9k.h @@ -549,17 +549,16 @@ struct ath_rfkill { #define SC_OP_TXAGGR BIT(3) #define SC_OP_CHAINMASK_UPDATE BIT(4) #define SC_OP_FULL_RESET BIT(5) -#define SC_OP_NO_RESET BIT(6) -#define SC_OP_PREAMBLE_SHORT BIT(7) -#define SC_OP_PROTECT_ENABLE BIT(8) -#define SC_OP_RXFLUSH BIT(9) -#define SC_OP_LED_ASSOCIATED BIT(10) -#define SC_OP_RFKILL_REGISTERED BIT(11) -#define SC_OP_RFKILL_SW_BLOCKED BIT(12) -#define SC_OP_RFKILL_HW_BLOCKED BIT(13) -#define SC_OP_WAIT_FOR_BEACON BIT(14) -#define SC_OP_LED_ON BIT(15) -#define SC_OP_SCANNING BIT(16) +#define SC_OP_PREAMBLE_SHORT BIT(6) +#define SC_OP_PROTECT_ENABLE BIT(7) +#define SC_OP_RXFLUSH BIT(8) +#define SC_OP_LED_ASSOCIATED BIT(9) +#define SC_OP_RFKILL_REGISTERED BIT(10) +#define SC_OP_RFKILL_SW_BLOCKED BIT(11) +#define SC_OP_RFKILL_HW_BLOCKED BIT(12) +#define SC_OP_WAIT_FOR_BEACON BIT(13) +#define SC_OP_LED_ON BIT(14) +#define SC_OP_SCANNING BIT(15) struct ath_bus_ops { void (*read_cachesize)(struct ath_softc *sc, int *csz); diff --git a/drivers/net/wireless/ath9k/beacon.c b/drivers/net/wireless/ath9k/beacon.c index c3044891a935..349904c761e4 100644 --- a/drivers/net/wireless/ath9k/beacon.c +++ b/drivers/net/wireless/ath9k/beacon.c @@ -49,13 +49,6 @@ static int ath_beaconq_config(struct ath_softc *sc) } } -static void ath_bstuck_process(struct ath_softc *sc) -{ - DPRINTF(sc, ATH_DBG_BEACON, "stuck beacon; resetting (bmiss count %u)\n", - sc->beacon.bmisscnt); - ath_reset(sc, false); -} - /* * Associates the beacon frame buffer with a transmit descriptor. Will set * up all required antenna switch parameters, rate codes, and channel flags. @@ -401,83 +394,37 @@ void ath_beacon_tasklet(unsigned long data) struct ath_hw *ah = sc->sc_ah; struct ath_buf *bf = NULL; int slot, if_id; - u32 bfaddr, show_cycles = 0, bc = 0, tsftu; - u32 rx_clear = 0, rx_frame = 0, tx_frame = 0; + u32 bfaddr, bc = 0, tsftu; u64 tsf; u16 intval; - if (sc->sc_flags & SC_OP_NO_RESET) { - show_cycles = ath9k_hw_GetMibCycleCountsPct(ah, - &rx_clear, &rx_frame, &tx_frame); - } - /* * Check if the previous beacon has gone out. If * not don't try to post another, skip this period * and wait for the next. Missed beacons indicate * a problem and should not occur. If we miss too * many consecutive beacons reset the device. - * - * FIXME: Clean up this mess !! */ if (ath9k_hw_numtxpending(ah, sc->beacon.beaconq) != 0) { sc->beacon.bmisscnt++; - /* XXX: doth needs the chanchange IE countdown decremented. - * We should consider adding a mac80211 call to indicate - * a beacon miss so appropriate action could be taken - * (in that layer). - */ + if (sc->beacon.bmisscnt < BSTUCK_THRESH) { - if (sc->sc_flags & SC_OP_NO_RESET) { - DPRINTF(sc, ATH_DBG_BEACON, - "missed %u consecutive beacons\n", - sc->beacon.bmisscnt); - if (show_cycles) { - /* - * Display cycle counter stats from HW - * to aide in debug of stickiness. - */ - DPRINTF(sc, ATH_DBG_BEACON, - "busy times: rx_clear=%d, " - "rx_frame=%d, tx_frame=%d\n", - rx_clear, rx_frame, - tx_frame); - } else { - DPRINTF(sc, ATH_DBG_BEACON, - "unable to obtain " - "busy times\n"); - } - } else { - DPRINTF(sc, ATH_DBG_BEACON, - "missed %u consecutive beacons\n", - sc->beacon.bmisscnt); - } + DPRINTF(sc, ATH_DBG_BEACON, + "missed %u consecutive beacons\n", + sc->beacon.bmisscnt); } else if (sc->beacon.bmisscnt >= BSTUCK_THRESH) { - if (sc->sc_flags & SC_OP_NO_RESET) { - if (sc->beacon.bmisscnt == BSTUCK_THRESH) { - DPRINTF(sc, ATH_DBG_BEACON, - "beacon is officially " - "stuck\n"); - } - } else { - DPRINTF(sc, ATH_DBG_BEACON, - "beacon is officially stuck\n"); - ath_bstuck_process(sc); - } + DPRINTF(sc, ATH_DBG_BEACON, + "beacon is officially stuck\n"); + ath_reset(sc, false); } + return; } if (sc->beacon.bmisscnt != 0) { - if (sc->sc_flags & SC_OP_NO_RESET) { - DPRINTF(sc, ATH_DBG_BEACON, - "resume beacon xmit after %u misses\n", - sc->beacon.bmisscnt); - } else { - DPRINTF(sc, ATH_DBG_BEACON, - "resume beacon xmit after %u misses\n", - sc->beacon.bmisscnt); - } + DPRINTF(sc, ATH_DBG_BEACON, + "resume beacon xmit after %u misses\n", + sc->beacon.bmisscnt); sc->beacon.bmisscnt = 0; } @@ -497,8 +444,7 @@ void ath_beacon_tasklet(unsigned long data) DPRINTF(sc, ATH_DBG_BEACON, "slot %d [tsf %llu tsftu %u intval %u] if_id %d\n", - slot, (unsigned long long)tsf, tsftu, - intval, if_id); + slot, tsf, tsftu, intval, if_id); bfaddr = 0; if (if_id != ATH_IF_ID_ANY) { @@ -508,6 +454,7 @@ void ath_beacon_tasklet(unsigned long data) bc = 1; } } + /* * Handle slot time change when a non-ERP station joins/leaves * an 11g network. The 802.11 layer notifies us via callback, @@ -524,7 +471,6 @@ void ath_beacon_tasklet(unsigned long data) * interval has passed. When bursting slot is always left * set to ATH_BCBUF so this check is a noop. */ - /* XXX locking */ if (sc->beacon.updateslot == UPDATE) { sc->beacon.updateslot = COMMIT; /* commit next beacon */ sc->beacon.slotupdate = slot; @@ -541,7 +487,6 @@ void ath_beacon_tasklet(unsigned long data) if (!ath9k_hw_stoptxdma(ah, sc->beacon.beaconq)) { DPRINTF(sc, ATH_DBG_FATAL, "beacon queue %u did not stop?\n", sc->beacon.beaconq); - /* NB: the HAL still stops DMA, so proceed */ } /* NB: cabq traffic should already be queued and primed */