From: John Crispin <john@openwrt.org>
Date: Fri, 12 Sep 2014 06:53:15 +0000 (+0000)
Subject: atheros: ar2315-pci: update host bridge resources
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=94efeaa51f4e4f00160559c53ca6f601f2864560;p=openwrt%2Fstaging%2Fansuel.git

atheros: ar2315-pci: update host bridge resources

It seems that the PCI controller does not support I/O ports, so remove
the ports range. Also correct the beginning of the memory range and its
size.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 42503
---

diff --git a/target/linux/atheros/patches-3.14/100-board.patch b/target/linux/atheros/patches-3.14/100-board.patch
index c87734b69d..4512d55ed4 100644
--- a/target/linux/atheros/patches-3.14/100-board.patch
+++ b/target/linux/atheros/patches-3.14/100-board.patch
@@ -674,7 +674,7 @@
 +#endif /* __ASM_MACH_AR231X_WAR_H */
 --- /dev/null
 +++ b/arch/mips/include/asm/mach-ar231x/ar2315_regs.h
-@@ -0,0 +1,624 @@
+@@ -0,0 +1,625 @@
 +/*
 + * Register definitions for AR2315+
 + *
@@ -738,6 +738,7 @@
 +#define AR2315_UART0            0x11100000      /* UART MMR */
 +#define AR2315_SPI_MMR          0x11300000      /* SPI FLASH MMR */
 +#define AR2315_PCIEXT           0x80000000      /* pci external */
++#define AR2315_PCIEXT_SZ	0x40000000
 +
 +/* MII registers offset inside Ethernet MMR region */
 +#define AR2315_ENET0_MII	(AR2315_ENET0 + 0x14)
diff --git a/target/linux/atheros/patches-3.14/105-ar2315_pci.patch b/target/linux/atheros/patches-3.14/105-ar2315_pci.patch
index 6623dabf32..1460299a75 100644
--- a/target/linux/atheros/patches-3.14/105-ar2315_pci.patch
+++ b/target/linux/atheros/patches-3.14/105-ar2315_pci.patch
@@ -7,7 +7,7 @@
 +obj-$(CONFIG_ATHEROS_AR2315_PCI) += pci.o
 --- /dev/null
 +++ b/arch/mips/ar231x/pci.c
-@@ -0,0 +1,350 @@
+@@ -0,0 +1,337 @@
 +/*
 + * This program is free software; you can redistribute it and/or
 + * modify it under the terms of the GNU General Public License
@@ -61,10 +61,6 @@
 +#include <ar2315_regs.h>
 +#include "devices.h"
 +
-+#define AR2315_MEM_BASE    0x80800000UL
-+#define AR2315_MEM_SIZE    0x00ffffffUL
-+#define AR2315_IO_SIZE     0x00007fffUL
-+
 +/* Arbitrary size of memory region to access the configuration space */
 +#define AR2315_PCI_CFG_SIZE	0x00100000
 +
@@ -160,16 +156,16 @@
 +
 +static struct resource ar2315_mem_resource = {
 +	.name	= "ar2315-pci-mem",
-+	.start	= AR2315_MEM_BASE,
-+	.end	= AR2315_MEM_BASE + AR2315_MEM_SIZE - AR2315_IO_SIZE - 1 +
-+		  0x4000000,
++	.start	= AR2315_PCIEXT,
++	.end	= AR2315_PCIEXT + AR2315_PCIEXT_SZ - 1,
 +	.flags	= IORESOURCE_MEM,
 +};
 +
++/* PCI controller does not support I/O ports */
 +static struct resource ar2315_io_resource = {
 +	.name	= "ar2315-pci-io",
-+	.start	= AR2315_MEM_BASE + AR2315_MEM_SIZE - AR2315_IO_SIZE,
-+	.end	= AR2315_MEM_BASE + AR2315_MEM_SIZE - 1,
++	.start	= 0,
++	.end	= 0,
 +	.flags	= IORESOURCE_IO,
 +};
 +
@@ -298,11 +294,6 @@
 +		return -ENOMEM;
 +	}
 +
-+	ar2315_pci_controller.io_map_base =
-+			(unsigned long)ioremap_nocache(AR2315_MEM_BASE +
-+			AR2315_MEM_SIZE, AR2315_IO_SIZE);
-+	set_io_port_base(ar2315_pci_controller.io_map_base); /* PCI I/O space*/
-+
 +	/* Reset PCI DMA logic */
 +	reg = ar231x_mask_reg(AR2315_RESET, 0, AR2315_RESET_PCIDMA);
 +	msleep(20);
@@ -338,10 +329,6 @@
 +
 +	msleep(500);
 +
-+	/* dirty hack - anyone with a datasheet that knows the memory map ? */
-+	ioport_resource.start = 0x10000000;
-+	ioport_resource.end = 0xffffffff;
-+
 +	res = ar2315_pci_host_setup();
 +	if (res)
 +		goto error;