From: Rosen Penev <rosenp@gmail.com>
Date: Mon, 19 Aug 2024 22:08:55 +0000 (-0700)
Subject: mpc85xx: tl-wdr4900: move platform code to dts
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=949e1a0856c4a04ac4a3fee1bd4a0cc69ac187c5;p=openwrt%2Fstaging%2Fthess.git

mpc85xx: tl-wdr4900: move platform code to dts

No benefit in doing so in platform file. Code for dts has already been
written. Might as well use it.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16125
Signed-off-by: Robert Marko <robimarko@gmail.com>
---

diff --git a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/tl-wdr4900-v1.dts b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/tl-wdr4900-v1.dts
index d8162f0dff..91baba0cd7 100644
--- a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/tl-wdr4900-v1.dts
+++ b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/tl-wdr4900-v1.dts
@@ -266,9 +266,12 @@
 				  0x1000000 0x0 0x0
 				  0x0 0x100000>;
 
-			wifi@0,0 {
+			ath9k: wifi@0,0 {
 				compatible = "pci168c,0033";
 				reg = <0x0000 0 0 0 0>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				qca,led-pin = /bits/ 8 <0>;
 				nvmem-cells = <&cal_caldata_1000>, <&macaddr_uboot_4fc00 0>;
 				nvmem-cell-names = "calibration", "mac-address";
 			};
@@ -291,6 +294,15 @@
 			wifi@0,0 {
 				compatible = "pci168c,0030";
 				reg = <0x0000 0 0 0 0>;
+				/*
+				* The PCI header of the AR9381 chip is not programmed
+				* correctly by the bootloader and the device uses wrong
+				* data due to that. Replace the broken values with the
+				* correct ones.
+				*/
+				device-id = <0x0030>;
+				class-code = <0x028000>;
+				qca,led-pin = /bits/ 8 <0>;
 				nvmem-cells = <&cal_caldata_5000>, <&macaddr_uboot_4fc00 (-1)>;
 				nvmem-cell-names = "calibration", "mac-address";
 			};
@@ -304,6 +316,11 @@
 	leds {
 		compatible = "gpio-leds";
 
+		wps {
+			gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
+			label = "tp-link:green:wps";
+		};
+
 		system_green: system {
 			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
 			label = "tp-link:blue:system";
diff --git a/target/linux/mpc85xx/files/arch/powerpc/platforms/85xx/tl_wdr4900_v1.c b/target/linux/mpc85xx/files/arch/powerpc/platforms/85xx/tl_wdr4900_v1.c
index 095f1fb77d..22c4ad3fc4 100644
--- a/target/linux/mpc85xx/files/arch/powerpc/platforms/85xx/tl_wdr4900_v1.c
+++ b/target/linux/mpc85xx/files/arch/powerpc/platforms/85xx/tl_wdr4900_v1.c
@@ -47,58 +47,6 @@ void __init tl_wdr4900_v1_pic_init(void)
 	mpic_init(mpic);
 }
 
-#ifdef CONFIG_PCI
-static struct gpio_led tl_wdr4900_v1_wmac_leds_gpio[] = {
-	{
-		.name		= "tp-link:blue:wps",
-		.gpio		= 1,
-		.active_low	= 1,
-	},
-};
-
-static struct ath9k_platform_data tl_wdr4900_v1_wmac0_data = {
-	.led_pin = 0,
-	.leds = tl_wdr4900_v1_wmac_leds_gpio,
-	.num_leds = ARRAY_SIZE(tl_wdr4900_v1_wmac_leds_gpio),
-};
-
-static struct ath9k_platform_data tl_wdr4900_v1_wmac1_data = {
-	.led_pin = 0,
-};
-
-static void tl_wdr4900_v1_pci_wmac_fixup(struct pci_dev *dev)
-{
-	if (!machine_is(tl_wdr4900_v1))
-		return;
-
-	if (dev->bus->number == 1 &&
-	    PCI_SLOT(dev->devfn) == 0) {
-		dev->dev.platform_data = &tl_wdr4900_v1_wmac0_data;
-		return;
-	}
-
-	if (dev->bus->number == 3 &&
-	    PCI_SLOT(dev->devfn) == 0 &&
-	    dev->device == 0xabcd) {
-		dev->dev.platform_data = &tl_wdr4900_v1_wmac1_data;
-
-		/*
-		 * The PCI header of the AR9381 chip is not programmed
-		 * correctly by the bootloader and the device uses wrong
-		 * data due to that. Replace the broken values with the
-		 * correct ones.
-		 */
-		dev->device = 0x30;
-		dev->class = 0x028000;
-
-		pr_info("pci %s: AR9381 fixup applied\n", pci_name(dev));
-	}
-}
-
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID,
-			tl_wdr4900_v1_pci_wmac_fixup);
-#endif /* CONFIG_PCI */
-
 /*
  * Setup the architecture
  */