From: David Bauer Date: Wed, 31 Oct 2018 19:19:49 +0000 (+0100) Subject: ath79: add support for Archer C58/C59 v1 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=946ffe470d923fdde53db68592437194e0c276fc;p=openwrt%2Fstaging%2F981213.git ath79: add support for Archer C58/C59 v1 This commit adds support for the Archer C58 v1 and C59 v1, previously supported in the ar71xx target. CPU: Qualcomm QCA9561 RAM: 64M (C58) / 128M (C59) FLASH: 8M (C58) / 16M (C59) WiFi: QCA9561 bgn 3x3:3 QCA9888 nac 2x2:2 LED: Power, WiFi 2.4, WiFi 5, WAN green, WAN amber, LAN, WPS Only C59: USB BTN: WPS, WiFi, Reset Installation ------------ Via Web-UI: Update factory image via Web-UI. Via TFTP: Rename factory image to "tp_recovery.bin" and place it in the root-dir of your tftp server. Configure to listen on 192.168.0.66. Power up the router while holding down the reset-button. The router will flash itself and reboot. Note: For TFTP, you might need a switch between router and computer, as link establishment might take to long. Signed-off-by: David Bauer --- diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds index 47c900f6eb..7945ecba1f 100755 --- a/target/linux/ath79/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/base-files/etc/board.d/01_leds @@ -52,6 +52,11 @@ pcs,cr3000) ucidef_set_led_switch "lan3" "LAN3" "pcs:blue:lan3" "switch0" "0x10" ucidef_set_led_switch "lan4" "LAN4" "pcs:blue:lan4" "switch0" "0x02" ;; +tplink,archer-c58-v1|\ +tplink,archer-c59-v1) + ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x1E" + ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth0" + ;; tplink,re450-v2) ucidef_set_led_netdev "lan_data" "LAN Data" "tp-link:green:lan_data" "eth0" "tx rx" ucidef_set_led_netdev "lan_link" "LAN Link" "tp-link:green:lan_link" "eth0" "link" diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index fca9e42fb5..6aca7c7899 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -32,7 +32,9 @@ ath79_setup_interfaces() wd,mynet-wifi-rangeextender) ucidef_set_interface_lan "eth0" ;; - avm,fritz4020) + avm,fritz4020|\ + tplink,archer-c58-v1|\ + tplink,archer-c59-v1) ucidef_set_interface_wan "eth0" ucidef_add_switch "switch0" \ "0@eth1" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2" diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index b4bc20d1cf..cbc5c96170 100644 --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -131,6 +131,12 @@ case "$FIRMWARE" in ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin ;; + tplink,archer-c58-v1|\ + tplink,archer-c59-v1) + ath10kcal_extract "art" 20480 12064 + ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ + /lib/firmware/ath10k/QCA9888/hw2.0/board.bin + ;; esac ;; *) diff --git a/target/linux/ath79/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ath79/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac index 59c58f9c67..fe5aa64a19 100644 --- a/target/linux/ath79/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac +++ b/target/linux/ath79/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac @@ -18,6 +18,10 @@ case "$board" in [ "$PHYNBR" -eq 1 ] && \ echo $(k2t_get_mac "lan_mac") > /sys${DEVPATH}/macaddress ;; + tplink,archer-c58-v1|\ + tplink,archer-c59-v1) + echo $(macaddr_add $(mtd_get_mac_binary mac 8) $(($PHYNBR - 1)) ) > /sys${DEVPATH}/macaddress + ;; *) ;; esac diff --git a/target/linux/ath79/dts/qca9561_tplink_archer-c58-v1.dts b/target/linux/ath79/dts/qca9561_tplink_archer-c58-v1.dts new file mode 100644 index 0000000000..ffce955fd3 --- /dev/null +++ b/target/linux/ath79/dts/qca9561_tplink_archer-c58-v1.dts @@ -0,0 +1,130 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include +#include + +#include "qca9561_tplink_archer-c5x.dtsi" + +/ { + compatible = "tplink,archer-c58-v1", "qca,qca9560"; + model = "TP-LINK Archer C58 v1"; + + aliases { + led-boot = &power; + led-failsafe = &power; + led-running = &power; + led-upgrade = &power; + }; + + leds { + compatible = "gpio-leds"; + + power: power { + label = "tp-link:green:power"; + gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + wlan2g { + label = "tp-link:green:wlan2g"; + gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + default-state = "off"; + }; + + wlan5g { + label = "tp-link:green:wlan5g"; + gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + default-state = "off"; + }; + + wan_green { + label = "tp-link:green:wan"; + gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + wan_amber { + label = "tp-link:amber:wan"; + gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + lan { + label = "tp-link:green:lan"; + gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + wps { + label = "tp-link:green:wps"; + gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; +}; + +&spi { + status = "okay"; + num-cs = <1>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x000000 0x010000>; + read-only; + }; + + mac: partition@10000 { + label = "mac"; + reg = <0x010000 0x010000>; + read-only; + }; + + partition@20000 { + label = "firmware"; + reg = <0x020000 0x7c0000>; + }; + + partition@7e0000 { + label = "tplink"; + reg = <0x7e0000 0x010000>; + read-only; + }; + + art: partition@7f0000 { + label = "art"; + reg = <0x7f0000 0x010000>; + read-only; + }; + }; + }; +}; + +ð0 { + status = "okay"; + mtd-mac-address = <&mac 0x8>; + mtd-mac-address-increment = <1>; +}; + +ð1 { + status = "okay"; + mtd-mac-address = <&mac 0x8>; +}; + +&wmac { + status = "okay"; + mtd-cal-data = <&art 0x1000>; + mtd-mac-address = <&mac 0x8>; +}; diff --git a/target/linux/ath79/dts/qca9561_tplink_archer-c59-v1.dts b/target/linux/ath79/dts/qca9561_tplink_archer-c59-v1.dts new file mode 100644 index 0000000000..9d4df9a5fc --- /dev/null +++ b/target/linux/ath79/dts/qca9561_tplink_archer-c59-v1.dts @@ -0,0 +1,153 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include +#include + +#include "qca9561_tplink_archer-c5x.dtsi" + +/ { + compatible = "tplink,archer-c59-v1", "qca,qca9560"; + model = "TP-LINK Archer C59 v1"; + + aliases { + led-boot = &power; + led-failsafe = &power; + led-running = &power; + led-upgrade = &power; + }; + + leds { + compatible = "gpio-leds"; + + power: power { + label = "tp-link:green:power"; + gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + wlan2g { + label = "tp-link:green:wlan2g"; + gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + default-state = "off"; + }; + + wlan5g { + label = "tp-link:green:wlan5g"; + gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + default-state = "off"; + }; + + wan_green { + label = "tp-link:green:wan"; + gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + wan_amber { + label = "tp-link:amber:wan"; + gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + lan { + label = "tp-link:green:lan"; + gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + wps { + label = "tp-link:green:wps"; + gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + usb { + label = "tp-link:green:usb"; + gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>; + default-state = "off"; + linux,default-trigger = "usbport"; + trigger-sources = <&hub_port>; + }; + }; +}; + +&usb0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + hub_port: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; +}; + +&usb_phy0 { + status = "okay"; +}; + +&spi { + status = "okay"; + num-cs = <1>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x000000 0x010000>; + read-only; + }; + + mac: partition@10000 { + label = "mac"; + reg = <0x010000 0x010000>; + read-only; + }; + + partition@20000 { + label = "firmware"; + reg = <0x020000 0xe30000>; + }; + + partition@e50000 { + label = "tplink"; + reg = <0xe50000 0x1a0000>; + read-only; + }; + + art: partition@ff0000 { + label = "art"; + reg = <0xff0000 0x010000>; + read-only; + }; + }; + }; +}; + +ð0 { + status = "okay"; + mtd-mac-address = <&mac 0x8>; + mtd-mac-address-increment = <1>; +}; + +ð1 { + status = "okay"; + mtd-mac-address = <&mac 0x8>; +}; + +&wmac { + status = "okay"; + mtd-cal-data = <&art 0x1000>; + mtd-mac-address = <&mac 0x8>; +}; diff --git a/target/linux/ath79/dts/qca9561_tplink_archer-c5x.dtsi b/target/linux/ath79/dts/qca9561_tplink_archer-c5x.dtsi new file mode 100644 index 0000000000..dc56bf682a --- /dev/null +++ b/target/linux/ath79/dts/qca9561_tplink_archer-c5x.dtsi @@ -0,0 +1,98 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include +#include + +#include "qca956x.dtsi" + +/ { + compatible = "tplink,archer-c5x", "qca,qca9560"; + + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + led_spi { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + gpio-sck = <&gpio 18 GPIO_ACTIVE_HIGH>; + gpio-mosi = <&gpio 17 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; + + led_gpio: led_gpio@0 { + compatible = "fairchild,74hc595"; + reg = <0>; + gpio-controller; + #gpio-cells = <2>; + registers-number = <1>; + spi-max-frequency = <10000000>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + wps_button { + label = "WPS button"; + linux,code = ; + gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + }; + + wifi_button { + label = "WiFi button"; + linux,code = ; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + }; + + reset_button { + label = "Reset button"; + linux,code = ; + gpios = <&gpio 21 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-export { + compatible = "gpio-export"; + + gpio_shift_register_oe { + gpio-export,name = "tp-link:oe:sr"; + gpio-export,output = <0>; + gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; + }; + + gpio_shift_register_reset { + gpio-export,name = "tp-link:reset:sr"; + gpio-export,output = <1>; + gpios = <&gpio 19 GPIO_ACTIVE_HIGH>; + }; + + }; +}; + +&uart { + status = "okay"; +}; + +&gpio { + status = "okay"; +}; + +&pcie { + status = "okay"; +}; + +ð0 { + phy-mode = "mii"; + phy-handle = <&swphy0>; + + gmac-config { + device = <&gmac>; + + switch-phy-addr-swap = <1>; + switch-phy-swap = <1>; + }; +}; diff --git a/target/linux/ath79/image/common-tp-link.mk b/target/linux/ath79/image/common-tp-link.mk index 7490aeb1f3..1dd36ef525 100644 --- a/target/linux/ath79/image/common-tp-link.mk +++ b/target/linux/ath79/image/common-tp-link.mk @@ -39,6 +39,14 @@ define Build/mktplinkfw-combined @mv $@.new $@ endef +define Build/uImageArcher + mkimage -A $(LINUX_KARCH) \ + -O linux -T kernel \ + -C $(1) -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \ + -n '$(call toupper,$(LINUX_KARCH)) OpenWrt Linux-$(LINUX_VERSION)' -d $@ $@.new + @mv $@.new $@ +endef + define Device/tplink TPLINK_HWREV := 0x1 TPLINK_HEADER_VERSION := 1 @@ -88,3 +96,15 @@ define Device/tplink-16mlzma TPLINK_FLASHLAYOUT := 16Mlzma IMAGE_SIZE := 15872k endef + +define Device/tplink-safeloader + $(Device/tplink) + KERNEL := kernel-bin | append-dtb | lzma | tplink-v1-header + IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade | append-metadata + IMAGE/factory.bin := append-rootfs | tplink-safeloader factory +endef + +define Device/tplink-safeloader-uimage + $(Device/tplink-safeloader) + KERNEL := kernel-bin | append-dtb | lzma | uImageArcher lzma +endef diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk index d65e29e72a..c89198621e 100644 --- a/target/linux/ath79/image/generic-tp-link.mk +++ b/target/linux/ath79/image/generic-tp-link.mk @@ -1,5 +1,27 @@ include ./common-tp-link.mk +define Device/tplink_archer-c58-v1 + $(Device/tplink-safeloader-uimage) + ATH_SOC := qca9561 + IMAGE_SIZE := 7936k + DEVICE_TITLE := TP-LINK Archer C58 v1 + TPLINK_BOARD_ID := ARCHER-C58-V1 + DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct + SUPPORTED_DEVICES += archer-c58-v1 +endef +TARGET_DEVICES += tplink_archer-c58-v1 + +define Device/tplink_archer-c59-v1 + $(Device/tplink-safeloader-uimage) + ATH_SOC := qca9561 + IMAGE_SIZE := 14528k + DEVICE_TITLE := TP-LINK Archer C59 v1 + TPLINK_BOARD_ID := ARCHER-C59-V1 + DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca9888-ct + SUPPORTED_DEVICES += archer-c59-v1 +endef +TARGET_DEVICES += tplink_archer-c59-v1 + define Device/tplink_archer-c7-v1 $(Device/tplink-8mlzma) ATH_SOC := qca9558