From: Markus Stockhausen Date: Sun, 11 Aug 2024 17:56:45 +0000 (-0400) Subject: realtek: 6.6: copy VPE patches 315/319 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=943638d5cc0e590e8f75708a2169df8491f70a26;p=openwrt%2Fstaging%2Fxback.git realtek: 6.6: copy VPE patches 315/319 Copy the patch files to 6.6. Both target drivers/irqchip/irq-realtek-rtl.c and are additions and fixes for IRQ VPE handling. Signed-off-by: Markus Stockhausen --- diff --git a/target/linux/realtek/patches-6.6/315-irqchip-irq-realtek-rtl-add-VPE-support.patch b/target/linux/realtek/patches-6.6/315-irqchip-irq-realtek-rtl-add-VPE-support.patch new file mode 100644 index 0000000000..102c9850ce --- /dev/null +++ b/target/linux/realtek/patches-6.6/315-irqchip-irq-realtek-rtl-add-VPE-support.patch @@ -0,0 +1,402 @@ +From 6c18e9c491959ac0674ebe36b09f9ddc3f2c9bce Mon Sep 17 00:00:00 2001 +From: Birger Koblitz +Date: Fri, 31 Dec 2021 11:56:49 +0100 +Subject: [PATCH] realtek: Add VPE support for the IRQ driver + +In order to support VSMP, enable support for both VPEs +of the RTL839X and RTL930X SoCs in the irq-realtek-rtl +driver. Add support for IRQ affinity setting. + +Submitted-by: Birger Koblitz +--- + drivers/irqchip/irq-realtek-rtl.c | 152 +++++++++++++++--- + 1 file changed, 73 insertions(+), 76 deletions(-) + +--- a/drivers/irqchip/irq-realtek-rtl.c ++++ b/drivers/irqchip/irq-realtek-rtl.c +@@ -21,21 +21,63 @@ + #define RTL_ICTL_IRR2 0x10 + #define RTL_ICTL_IRR3 0x14 + +-#define REG(x) (realtek_ictl_base + x) ++#define RTL_ICTL_NUM_INPUTS 32 ++#define RTL_ICTL_NUM_OUTPUTS 15 + + static DEFINE_RAW_SPINLOCK(irq_lock); +-static void __iomem *realtek_ictl_base; ++ ++#define REG(offset, cpu) (realtek_ictl_base[cpu] + offset) ++ ++static void __iomem *realtek_ictl_base[NR_CPUS]; ++static cpumask_t realtek_ictl_cpu_configurable; ++ ++struct realtek_ictl_output { ++ /* IRQ controller data */ ++ struct fwnode_handle *fwnode; ++ /* Output specific data */ ++ unsigned int output_index; ++ struct irq_domain *domain; ++ u32 child_mask; ++}; ++ ++/* ++ * IRR0-IRR3 store 4 bits per interrupt, but Realtek uses inverted numbering, ++ * placing IRQ 31 in the first four bits. A routing value of '0' means the ++ * interrupt is left disconnected. Routing values {1..15} connect to output ++ * lines {0..14}. ++ */ ++#define IRR_OFFSET(idx) (4 * (3 - (idx * 4) / 32)) ++#define IRR_SHIFT(idx) ((idx * 4) % 32) ++ ++static inline u32 read_irr(void __iomem *irr0, int idx) ++{ ++ return (readl(irr0 + IRR_OFFSET(idx)) >> IRR_SHIFT(idx)) & 0xf; ++} ++ ++static inline void write_irr(void __iomem *irr0, int idx, u32 value) ++{ ++ unsigned int offset = IRR_OFFSET(idx); ++ unsigned int shift = IRR_SHIFT(idx); ++ u32 irr; ++ ++ irr = readl(irr0 + offset) & ~(0xf << shift); ++ irr |= (value & 0xf) << shift; ++ writel(irr, irr0 + offset); ++} + + static void realtek_ictl_unmask_irq(struct irq_data *i) + { + unsigned long flags; + u32 value; ++ int cpu; + + raw_spin_lock_irqsave(&irq_lock, flags); + +- value = readl(REG(RTL_ICTL_GIMR)); +- value |= BIT(i->hwirq); +- writel(value, REG(RTL_ICTL_GIMR)); ++ for_each_cpu(cpu, &realtek_ictl_cpu_configurable) { ++ value = readl(REG(RTL_ICTL_GIMR, cpu)); ++ value |= BIT(i->hwirq); ++ writel(value, REG(RTL_ICTL_GIMR, cpu)); ++ } + + raw_spin_unlock_irqrestore(&irq_lock, flags); + } +@@ -44,52 +86,137 @@ static void realtek_ictl_mask_irq(struct + { + unsigned long flags; + u32 value; ++ int cpu; + + raw_spin_lock_irqsave(&irq_lock, flags); + +- value = readl(REG(RTL_ICTL_GIMR)); +- value &= ~BIT(i->hwirq); +- writel(value, REG(RTL_ICTL_GIMR)); ++ for_each_cpu(cpu, &realtek_ictl_cpu_configurable) { ++ value = readl(REG(RTL_ICTL_GIMR, cpu)); ++ value &= ~BIT(i->hwirq); ++ writel(value, REG(RTL_ICTL_GIMR, cpu)); ++ } + + raw_spin_unlock_irqrestore(&irq_lock, flags); + } + ++static int __maybe_unused realtek_ictl_irq_affinity(struct irq_data *i, ++ const struct cpumask *dest, bool force) ++{ ++ struct realtek_ictl_output *output = i->domain->host_data; ++ cpumask_t cpu_configure; ++ cpumask_t cpu_disable; ++ cpumask_t cpu_enable; ++ unsigned long flags; ++ int cpu; ++ ++ raw_spin_lock_irqsave(&irq_lock, flags); ++ ++ cpumask_and(&cpu_configure, cpu_present_mask, &realtek_ictl_cpu_configurable); ++ ++ cpumask_and(&cpu_enable, &cpu_configure, dest); ++ cpumask_andnot(&cpu_disable, &cpu_configure, dest); ++ ++ for_each_cpu(cpu, &cpu_disable) ++ write_irr(REG(RTL_ICTL_IRR0, cpu), i->hwirq, 0); ++ ++ for_each_cpu(cpu, &cpu_enable) ++ write_irr(REG(RTL_ICTL_IRR0, cpu), i->hwirq, output->output_index + 1); ++ ++ irq_data_update_effective_affinity(i, &cpu_enable); ++ ++ raw_spin_unlock_irqrestore(&irq_lock, flags); ++ ++ return IRQ_SET_MASK_OK; ++} ++ + static struct irq_chip realtek_ictl_irq = { + .name = "realtek-rtl-intc", + .irq_mask = realtek_ictl_mask_irq, + .irq_unmask = realtek_ictl_unmask_irq, ++#ifdef CONFIG_SMP ++ .irq_set_affinity = realtek_ictl_irq_affinity, ++#endif + }; + + static int intc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw) + { ++ struct realtek_ictl_output *output = d->host_data; ++ unsigned long flags; ++ + irq_set_chip_and_handler(irq, &realtek_ictl_irq, handle_level_irq); + ++ raw_spin_lock_irqsave(&irq_lock, flags); ++ ++ output->child_mask |= BIT(hw); ++ write_irr(REG(RTL_ICTL_IRR0, 0), hw, output->output_index + 1); ++ ++ raw_spin_unlock_irqrestore(&irq_lock, flags); ++ + return 0; + } + ++static int intc_select(struct irq_domain *d, struct irq_fwspec *fwspec, ++ enum irq_domain_bus_token bus_token) ++{ ++ struct realtek_ictl_output *output = d->host_data; ++ bool routed_elsewhere; ++ unsigned long flags; ++ u32 routing_old; ++ int cpu; ++ ++ if (fwspec->fwnode != output->fwnode) ++ return false; ++ ++ /* Original specifiers had only one parameter */ ++ if (fwspec->param_count < 2) ++ return true; ++ ++ raw_spin_lock_irqsave(&irq_lock, flags); ++ ++ /* ++ * Inputs can only be routed to one output, so they shouldn't be ++ * allowed to end up in multiple domains. ++ */ ++ for_each_cpu(cpu, &realtek_ictl_cpu_configurable) { ++ routing_old = read_irr(REG(RTL_ICTL_IRR0, cpu), fwspec->param[0]); ++ routed_elsewhere = routing_old && fwspec->param[1] != routing_old - 1; ++ if (routed_elsewhere) { ++ pr_warn("soc int %d already routed to output %d\n", ++ fwspec->param[0], routing_old - 1); ++ break; ++ } ++ } ++ ++ raw_spin_unlock_irqrestore(&irq_lock, flags); ++ ++ return !routed_elsewhere && fwspec->param[1] == output->output_index; ++} ++ + static const struct irq_domain_ops irq_domain_ops = { + .map = intc_map, ++ .select = intc_select, + .xlate = irq_domain_xlate_onecell, + }; + + static void realtek_irq_dispatch(struct irq_desc *desc) + { ++ struct realtek_ictl_output *output = irq_desc_get_handler_data(desc); + struct irq_chip *chip = irq_desc_get_chip(desc); +- struct irq_domain *domain; ++ int cpu = smp_processor_id(); + unsigned long pending; + unsigned int soc_int; + + chained_irq_enter(chip, desc); +- pending = readl(REG(RTL_ICTL_GIMR)) & readl(REG(RTL_ICTL_GISR)); ++ pending = readl(REG(RTL_ICTL_GIMR, cpu)) & readl(REG(RTL_ICTL_GISR, cpu)) ++ & output->child_mask; + + if (unlikely(!pending)) { + spurious_interrupt(); + goto out; + } + +- domain = irq_desc_get_handler_data(desc); +- for_each_set_bit(soc_int, &pending, 32) +- generic_handle_domain_irq(domain, soc_int); ++ for_each_set_bit(soc_int, &pending, RTL_ICTL_NUM_INPUTS) ++ generic_handle_domain_irq(output->domain, soc_int); + + out: + chained_irq_exit(chip, desc); +@@ -102,85 +229,110 @@ out: + * thus go into 4 IRRs. A routing value of '0' means the interrupt is left + * disconnected. Routing values {1..15} connect to output lines {0..14}. + */ +-static int __init map_interrupts(struct device_node *node, struct irq_domain *domain) ++static int __init setup_parent_interrupts(struct device_node *node, int *parents, ++ unsigned int num_parents) + { +- struct device_node *cpu_ictl; +- const __be32 *imap; +- u32 imaplen, soc_int, cpu_int, tmp, regs[4]; +- int ret, i, irr_regs[] = { +- RTL_ICTL_IRR3, +- RTL_ICTL_IRR2, +- RTL_ICTL_IRR1, +- RTL_ICTL_IRR0, +- }; +- u8 mips_irqs_set; ++ struct realtek_ictl_output *outputs; ++ struct realtek_ictl_output *output; ++ struct irq_domain *domain; ++ unsigned int p; + +- ret = of_property_read_u32(node, "#address-cells", &tmp); +- if (ret || tmp) +- return -EINVAL; ++ outputs = kcalloc(num_parents, sizeof(*outputs), GFP_KERNEL); ++ if (!outputs) ++ return -ENOMEM; + +- imap = of_get_property(node, "interrupt-map", &imaplen); +- if (!imap || imaplen % 3) +- return -EINVAL; ++ for (p = 0; p < num_parents; p++) { ++ output = outputs + p; + +- mips_irqs_set = 0; +- memset(regs, 0, sizeof(regs)); +- for (i = 0; i < imaplen; i += 3 * sizeof(u32)) { +- soc_int = be32_to_cpup(imap); +- if (soc_int > 31) +- return -EINVAL; +- +- cpu_ictl = of_find_node_by_phandle(be32_to_cpup(imap + 1)); +- if (!cpu_ictl) +- return -EINVAL; +- ret = of_property_read_u32(cpu_ictl, "#interrupt-cells", &tmp); +- of_node_put(cpu_ictl); +- if (ret || tmp != 1) +- return -EINVAL; +- +- cpu_int = be32_to_cpup(imap + 2); +- if (cpu_int > 7 || cpu_int < 2) +- return -EINVAL; +- +- if (!(mips_irqs_set & BIT(cpu_int))) { +- irq_set_chained_handler_and_data(cpu_int, realtek_irq_dispatch, +- domain); +- mips_irqs_set |= BIT(cpu_int); +- } ++ domain = irq_domain_add_linear(node, RTL_ICTL_NUM_INPUTS, &irq_domain_ops, output); ++ if (!domain) ++ goto domain_err; + +- /* Use routing values (1..6) for CPU interrupts (2..7) */ +- regs[(soc_int * 4) / 32] |= (cpu_int - 1) << (soc_int * 4) % 32; +- imap += 3; +- } ++ output->fwnode = of_node_to_fwnode(node); ++ output->output_index = p; ++ output->domain = domain; + +- for (i = 0; i < 4; i++) +- writel(regs[i], REG(irr_regs[i])); ++ irq_set_chained_handler_and_data(parents[p], realtek_irq_dispatch, output); ++ } + + return 0; ++ ++domain_err: ++ while (p--) { ++ irq_set_chained_handler_and_data(parents[p], NULL, NULL); ++ irq_domain_remove(outputs[p].domain); ++ } ++ ++ kfree(outputs); ++ ++ return -ENOMEM; + } + + static int __init realtek_rtl_of_init(struct device_node *node, struct device_node *parent) + { +- struct irq_domain *domain; +- int ret; ++ int parent_irqs[RTL_ICTL_NUM_OUTPUTS]; ++ struct of_phandle_args oirq; ++ unsigned int num_parents; ++ unsigned int soc_irq; ++ unsigned int p; ++ int cpu; ++ ++ cpumask_clear(&realtek_ictl_cpu_configurable); ++ ++ for (cpu = 0; cpu < NR_CPUS; cpu++) { ++ realtek_ictl_base[cpu] = of_iomap(node, cpu); ++ if (realtek_ictl_base[cpu]) { ++ cpumask_set_cpu(cpu, &realtek_ictl_cpu_configurable); ++ ++ /* Disable all cascaded interrupts and clear routing */ ++ writel(0, REG(RTL_ICTL_GIMR, cpu)); ++ for (soc_irq = 0; soc_irq < RTL_ICTL_NUM_INPUTS; soc_irq++) ++ write_irr(REG(RTL_ICTL_IRR0, cpu), soc_irq, 0); ++ } ++ } + +- realtek_ictl_base = of_iomap(node, 0); +- if (!realtek_ictl_base) ++ if (cpumask_empty(&realtek_ictl_cpu_configurable)) + return -ENXIO; + +- /* Disable all cascaded interrupts */ +- writel(0, REG(RTL_ICTL_GIMR)); ++ num_parents = of_irq_count(node); ++ if (num_parents > RTL_ICTL_NUM_OUTPUTS) { ++ pr_err("too many parent interrupts\n"); ++ return -EINVAL; ++ } + +- domain = irq_domain_add_simple(node, 32, 0, +- &irq_domain_ops, NULL); ++ for (p = 0; p < num_parents; p++) ++ parent_irqs[p] = of_irq_get(node, p); + +- ret = map_interrupts(node, domain); +- if (ret) { +- pr_err("invalid interrupt map\n"); +- return ret; ++ if (WARN_ON(!num_parents)) { ++ /* ++ * If DT contains no parent interrupts, assume MIPS CPU IRQ 2 ++ * (HW0) is connected to the first output. This is the case for ++ * all known hardware anyway. "interrupt-map" is deprecated, so ++ * don't bother trying to parse that. ++ * Since this is to account for old devicetrees with one-cell ++ * interrupt specifiers, only one output domain is needed. ++ */ ++ oirq.np = of_find_compatible_node(NULL, NULL, "mti,cpu-interrupt-controller"); ++ if (oirq.np) { ++ oirq.args_count = 1; ++ oirq.args[0] = 2; ++ ++ parent_irqs[0] = irq_create_of_mapping(&oirq); ++ num_parents = 1; ++ } ++ ++ of_node_put(oirq.np); + } + +- return 0; ++ /* Ensure we haven't collected any errors before proceeding */ ++ for (p = 0; p < num_parents; p++) { ++ if (parent_irqs[p] < 0) ++ return parent_irqs[p]; ++ if (!parent_irqs[p]) ++ return -ENODEV; ++ } ++ ++ return setup_parent_interrupts(node, &parent_irqs[0], num_parents); + } + + IRQCHIP_DECLARE(realtek_rtl_intc, "realtek,rtl-intc", realtek_rtl_of_init); diff --git a/target/linux/realtek/patches-6.6/319-irqchip-irq-realtek-rtl-fix-VPE-affinity.patch b/target/linux/realtek/patches-6.6/319-irqchip-irq-realtek-rtl-fix-VPE-affinity.patch new file mode 100644 index 0000000000..0c29b7739e --- /dev/null +++ b/target/linux/realtek/patches-6.6/319-irqchip-irq-realtek-rtl-fix-VPE-affinity.patch @@ -0,0 +1,159 @@ +From 2cd00b51470a30198b048a5fca48a04db77e29cc Mon Sep 17 00:00:00 2001 +From: INAGAKI Hiroshi +Date: Fri, 21 May 2021 23:16:37 +0900 +Subject: [PATCH] realtek: backport irq-realtek-rtl driver from 5.12 to 5.10 + +This patch backports "irq-realtek-rtl" driver to Kernel 5.10 from 5.12. +"MACH_REALTEK_RTL" is used as a platform name in upstream, but "RTL838X" +is used in OpenWrt, so update the dependency by the additional patch. + +Submitted-by: INAGAKI Hiroshi +--- + drivers/irqchip/irq-realtek-rtl.c | 38 +++++++++++------ + 1 files changed, 58 insertions(+), 20 deletions(-) + +--- a/drivers/irqchip/irq-realtek-rtl.c ++++ b/drivers/irqchip/irq-realtek-rtl.c +@@ -28,6 +28,7 @@ static DEFINE_RAW_SPINLOCK(irq_lock); + + #define REG(offset, cpu) (realtek_ictl_base[cpu] + offset) + ++static u32 realtek_ictl_unmask[NR_CPUS]; + static void __iomem *realtek_ictl_base[NR_CPUS]; + static cpumask_t realtek_ictl_cpu_configurable; + +@@ -41,11 +42,29 @@ struct realtek_ictl_output { + }; + + /* +- * IRR0-IRR3 store 4 bits per interrupt, but Realtek uses inverted numbering, +- * placing IRQ 31 in the first four bits. A routing value of '0' means the +- * interrupt is left disconnected. Routing values {1..15} connect to output +- * lines {0..14}. ++ * Per CPU we have a set of 5 registers that determine interrupt handling for ++ * 32 external interrupts. GIMR (enable/disable interrupt) plus IRR0-IRR3 that ++ * contain "routing" or "priority" values. GIMR uses one bit for each interrupt ++ * and IRRx store 4 bits per interrupt. Realtek uses inverted numbering, ++ * placing IRQ 31 in the first four bits. The register combinations give the ++ * following results for a single interrupt in the wild: ++ * ++ * a) GIMR = 0 / IRRx > 0 -> no interrupts ++ * b) GIMR = 0 / IRRx = 0 -> no interrupts ++ * c) GIMR = 1 / IRRx > 0 -> interrupts ++ * d) GIMR = 1 / IRRx = 0 -> rare interrupts in SMP environment ++ * ++ * Combination d) seems to trigger interrupts only on a VPE if the other VPE ++ * has GIMR = 0 and IRRx > 0. E.g. busy without interrupts allowed. To provide ++ * IRQ balancing features in SMP this driver will handle the registers as ++ * follows: ++ * ++ * 1) set IRRx > 0 for VPE where the interrupt is desired ++ * 2) set IRRx = 0 for VPE where the interrupt is not desired ++ * 3) set both GIMR = 0 to mask (disabled) interrupt ++ * 4) set GIMR = 1 to unmask (enable) interrupt but only for VPE where IRRx > 0 + */ ++ + #define IRR_OFFSET(idx) (4 * (3 - (idx * 4) / 32)) + #define IRR_SHIFT(idx) ((idx * 4) % 32) + +@@ -65,19 +84,33 @@ static inline void write_irr(void __iome + writel(irr, irr0 + offset); + } + ++static inline void enable_gimr(int hwirq, int cpu) ++{ ++ u32 value; ++ ++ value = readl(REG(RTL_ICTL_GIMR, cpu)); ++ value |= (BIT(hwirq) & realtek_ictl_unmask[cpu]); ++ writel(value, REG(RTL_ICTL_GIMR, cpu)); ++} ++ ++static inline void disable_gimr(int hwirq, int cpu) ++{ ++ u32 value; ++ ++ value = readl(REG(RTL_ICTL_GIMR, cpu)); ++ value &= ~BIT(hwirq); ++ writel(value, REG(RTL_ICTL_GIMR, cpu)); ++} ++ + static void realtek_ictl_unmask_irq(struct irq_data *i) + { + unsigned long flags; +- u32 value; + int cpu; + + raw_spin_lock_irqsave(&irq_lock, flags); + +- for_each_cpu(cpu, &realtek_ictl_cpu_configurable) { +- value = readl(REG(RTL_ICTL_GIMR, cpu)); +- value |= BIT(i->hwirq); +- writel(value, REG(RTL_ICTL_GIMR, cpu)); +- } ++ for_each_cpu(cpu, &realtek_ictl_cpu_configurable) ++ enable_gimr(i->hwirq, cpu); + + raw_spin_unlock_irqrestore(&irq_lock, flags); + } +@@ -85,16 +118,12 @@ static void realtek_ictl_unmask_irq(stru + static void realtek_ictl_mask_irq(struct irq_data *i) + { + unsigned long flags; +- u32 value; + int cpu; + + raw_spin_lock_irqsave(&irq_lock, flags); + +- for_each_cpu(cpu, &realtek_ictl_cpu_configurable) { +- value = readl(REG(RTL_ICTL_GIMR, cpu)); +- value &= ~BIT(i->hwirq); +- writel(value, REG(RTL_ICTL_GIMR, cpu)); +- } ++ for_each_cpu(cpu, &realtek_ictl_cpu_configurable) ++ disable_gimr(i->hwirq, cpu); + + raw_spin_unlock_irqrestore(&irq_lock, flags); + } +@@ -116,11 +145,17 @@ static int __maybe_unused realtek_ictl_i + cpumask_and(&cpu_enable, &cpu_configure, dest); + cpumask_andnot(&cpu_disable, &cpu_configure, dest); + +- for_each_cpu(cpu, &cpu_disable) ++ for_each_cpu(cpu, &cpu_disable) { + write_irr(REG(RTL_ICTL_IRR0, cpu), i->hwirq, 0); ++ realtek_ictl_unmask[cpu] &= ~BIT(i->hwirq); ++ disable_gimr(i->hwirq, cpu); ++ } + +- for_each_cpu(cpu, &cpu_enable) ++ for_each_cpu(cpu, &cpu_enable) { + write_irr(REG(RTL_ICTL_IRR0, cpu), i->hwirq, output->output_index + 1); ++ realtek_ictl_unmask[cpu] |= BIT(i->hwirq); ++ enable_gimr(i->hwirq, cpu); ++ } + + irq_data_update_effective_affinity(i, &cpu_enable); + +@@ -149,6 +184,7 @@ static int intc_map(struct irq_domain *d + + output->child_mask |= BIT(hw); + write_irr(REG(RTL_ICTL_IRR0, 0), hw, output->output_index + 1); ++ realtek_ictl_unmask[0] |= BIT(hw); + + raw_spin_unlock_irqrestore(&irq_lock, flags); + +@@ -285,9 +321,11 @@ static int __init realtek_rtl_of_init(st + cpumask_set_cpu(cpu, &realtek_ictl_cpu_configurable); + + /* Disable all cascaded interrupts and clear routing */ +- writel(0, REG(RTL_ICTL_GIMR, cpu)); +- for (soc_irq = 0; soc_irq < RTL_ICTL_NUM_INPUTS; soc_irq++) ++ for (soc_irq = 0; soc_irq < RTL_ICTL_NUM_INPUTS; soc_irq++) { + write_irr(REG(RTL_ICTL_IRR0, cpu), soc_irq, 0); ++ realtek_ictl_unmask[cpu] &= ~BIT(soc_irq); ++ disable_gimr(soc_irq, cpu); ++ } + } + } +