From: Arvind Sankar Date: Tue, 11 Feb 2020 16:22:35 +0000 (-0500) Subject: ALSA: usb-audio: Apply sample rate quirk for Audioengine D1 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=93f9d1a4ac5930654c17412e3911b46ece73755a;p=openwrt%2Fstaging%2Fblogic.git ALSA: usb-audio: Apply sample rate quirk for Audioengine D1 The Audioengine D1 (0x2912:0x30c8) does support reading the sample rate, but it returns the rate in byte-reversed order. When setting sampling rate, the driver produces these warning messages: [168840.944226] usb 3-2.2: current rate 4500480 is different from the runtime rate 44100 [168854.930414] usb 3-2.2: current rate 8436480 is different from the runtime rate 48000 [168905.185825] usb 3-2.1.2: current rate 30465 is different from the runtime rate 96000 As can be seen from the hexadecimal conversion, the current rate read back is byte-reversed from the rate that was set. 44100 == 0x00ac44, 4500480 == 0x44ac00 48000 == 0x00bb80, 8436480 == 0x80bb00 96000 == 0x017700, 30465 == 0x007701 Rather than implementing a new quirk to reverse the order, just skip checking the rate to avoid spamming the log. Signed-off-by: Arvind Sankar Cc: Link: https://lore.kernel.org/r/20200211162235.1639889-1-nivedita@alum.mit.edu Signed-off-by: Takashi Iwai --- diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 3a5242e383b2..7f558f4b4520 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1440,6 +1440,7 @@ bool snd_usb_get_sample_rate_quirk(struct snd_usb_audio *chip) case USB_ID(0x1395, 0x740a): /* Sennheiser DECT */ case USB_ID(0x1901, 0x0191): /* GE B850V3 CP2114 audio interface */ case USB_ID(0x21b4, 0x0081): /* AudioQuest DragonFly */ + case USB_ID(0x2912, 0x30c8): /* Audioengine D1 */ return true; }