From: Adrian Schmutzler Date: Tue, 19 Jan 2021 17:48:48 +0000 (+0100) Subject: ramips: mt7621: create DTSI for Xiaomi NAND devices X-Git-Tag: v21.02.0-rc1~481 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=93be5926a2c2ebda05486a43f998a2ee38d32e61;p=openwrt%2Fstaging%2Fhauke.git ramips: mt7621: create DTSI for Xiaomi NAND devices This creates a DTSI for Xiaomi devices with 128M NAND. This allows to consolidate the partitions and a few other nodes for AC2100 family and Mi Router 3G. Note that the Mi Router 3 Pro has 256M NAND and differently sized partitions. Signed-off-by: Adrian Schmutzler --- diff --git a/target/linux/ramips/dts/mt7621_xiaomi_mi-router-3g.dts b/target/linux/ramips/dts/mt7621_xiaomi_mi-router-3g.dts index 479cfc354c..40ea6625d4 100644 --- a/target/linux/ramips/dts/mt7621_xiaomi_mi-router-3g.dts +++ b/target/linux/ramips/dts/mt7621_xiaomi_mi-router-3g.dts @@ -1,7 +1,4 @@ -#include "mt7621.dtsi" - -#include -#include +#include "mt7621_xiaomi_nand_128m.dtsi" / { compatible = "xiaomi,mi-router-3g", "mediatek,mt7621-soc"; @@ -15,10 +12,6 @@ label-mac-device = &gmac0; }; - chosen { - bootargs = "console=ttyS0,115200n8"; - }; - leds { compatible = "gpio-leds"; @@ -56,16 +49,6 @@ }; }; - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&gpio 18 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - reg_usb_vbus: regulator { compatible = "regulator-fixed"; regulator-name = "usb_vbus"; @@ -80,92 +63,6 @@ vbus-supply = <®_usb_vbus>; }; -&nand { - status = "okay"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "Bootloader"; - reg = <0x0 0x80000>; - read-only; - }; - - partition@80000 { - label = "Config"; - reg = <0x80000 0x40000>; - }; - - partition@c0000 { - label = "Bdata"; - reg = <0xc0000 0x40000>; - read-only; - }; - - factory: partition@100000 { - label = "factory"; - reg = <0x100000 0x40000>; - read-only; - }; - - partition@140000 { - label = "crash"; - reg = <0x140000 0x40000>; - }; - - partition@180000 { - label = "crash_syslog"; - reg = <0x180000 0x40000>; - }; - - partition@1c0000 { - label = "reserved0"; - reg = <0x1c0000 0x40000>; - read-only; - }; - - /* uboot expects to find kernels at 0x200000 & 0x600000 - * referred to as system 1 & system 2 respectively. - * a kernel is considered suitable for handing control over - * if its linux magic number exists & uImage CRC are correct. - * If either of those conditions fail, a matching sys'n'_fail flag - * is set in uboot env & a restart performed in the hope that the - * alternate kernel is okay. - * if neither kernel checksums ok and both are marked failed, system 2 - * is booted anyway. - * - * Note uboot's tftp flash install writes the transferred - * image to both kernel partitions. - */ - - partition@200000 { - label = "kernel_stock"; - reg = <0x200000 0x400000>; - }; - - partition@600000 { - label = "kernel"; - reg = <0x600000 0x400000>; - }; - - /* ubi partition is the result of squashing - * next consecutive stock partitions: - * - rootfs0 (rootfs partition for stock kernel0), - * - rootfs1 (rootfs partition for stock failsafe kernel1), - * - overlay (used as ubi overlay in stock fw) - * resulting 117,5MiB space for packages. - */ - - partition@a00000 { - label = "ubi"; - reg = <0xa00000 0x7580000>; - }; - }; -}; - &pcie { status = "okay"; }; diff --git a/target/linux/ramips/dts/mt7621_xiaomi_nand_128m.dtsi b/target/linux/ramips/dts/mt7621_xiaomi_nand_128m.dtsi new file mode 100644 index 0000000000..12e6bccc2e --- /dev/null +++ b/target/linux/ramips/dts/mt7621_xiaomi_nand_128m.dtsi @@ -0,0 +1,109 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621.dtsi" + +#include +#include + +/ { + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + keys: keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio 18 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&nand { + status = "okay"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Bootloader"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@80000 { + label = "Config"; + reg = <0x80000 0x40000>; + }; + + partition@c0000 { + label = "Bdata"; + reg = <0xc0000 0x40000>; + read-only; + }; + + factory: partition@100000 { + label = "factory"; + reg = <0x100000 0x40000>; + read-only; + }; + + partition@140000 { + label = "crash"; + reg = <0x140000 0x40000>; + }; + + partition@180000 { + label = "crash_syslog"; + reg = <0x180000 0x40000>; + }; + + partition@1c0000 { + label = "reserved0"; + reg = <0x1c0000 0x40000>; + read-only; + }; + + /* uboot expects to find kernels at 0x200000 & 0x600000 + * referred to as system 1 & system 2 respectively. + * a kernel is considered suitable for handing control over + * if its linux magic number exists & uImage CRC are correct. + * If either of those conditions fail, a matching sys'n'_fail flag + * is set in uboot env & a restart performed in the hope that the + * alternate kernel is okay. + * if neither kernel checksums ok and both are marked failed, system 2 + * is booted anyway. + * + * Note uboot's tftp flash install writes the transferred + * image to both kernel partitions. + */ + + /* We keep stock xiaomi firmware (kernel0) here */ + partition@200000 { + label = "kernel_stock"; + reg = <0x200000 0x400000>; + }; + + partition@600000 { + label = "kernel"; + reg = <0x600000 0x400000>; + }; + + /* ubi partition is the result of squashing + * next consecutive stock partitions: + * - rootfs0 (rootfs partition for stock kernel0), + * - rootfs1 (rootfs partition for stock failsafe kernel1), + * - overlay (used as ubi overlay in stock fw) + * resulting 117,5MiB space for packages. + */ + + partition@a00000 { + label = "ubi"; + reg = <0xa00000 0x7580000>; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7621_xiaomi_router-ac2100.dtsi b/target/linux/ramips/dts/mt7621_xiaomi_router-ac2100.dtsi index 8241517c73..7e6b3afcdf 100644 --- a/target/linux/ramips/dts/mt7621_xiaomi_router-ac2100.dtsi +++ b/target/linux/ramips/dts/mt7621_xiaomi_router-ac2100.dtsi @@ -1,90 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT -#include "mt7621.dtsi" - -#include -#include - -/ { - chosen { - bootargs = "console=ttyS0,115200n8"; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&gpio 18 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&nand { - status = "okay"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "Bootloader"; - reg = <0x0 0x80000>; - read-only; - }; - - partition@80000 { - label = "Config"; - reg = <0x80000 0x40000>; - }; - - partition@c0000 { - label = "Bdata"; - reg = <0xc0000 0x40000>; - read-only; - }; - - factory: partition@100000 { - label = "factory"; - reg = <0x100000 0x40000>; - read-only; - }; - - partition@140000 { - label = "crash"; - reg = <0x140000 0x40000>; - }; - - partition@180000 { - label = "crash_syslog"; - reg = <0x180000 0x40000>; - }; - - partition@1c0000 { - label = "reserved0"; - reg = <0x1c0000 0x40000>; - read-only; - }; - - /* We keep stock xiaomi firmware (kernel0) here */ - partition@200000 { - label = "kernel_stock"; - reg = <0x200000 0x400000>; - }; - - partition@600000 { - label = "kernel"; - reg = <0x600000 0x400000>; - }; - - partition@a00000 { - label = "ubi"; - reg = <0xa00000 0x7580000>; - }; - }; -}; +#include "mt7621_xiaomi_nand_128m.dtsi" &pcie { status = "okay";