From: Jun Nie Date: Thu, 13 Jun 2019 03:47:09 +0000 (+0800) Subject: plat: imx7: Add PicoPi iMX7D basic support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=936072edbb29ac77be94ee182ed7c5c3581b11b1;p=project%2Fbcm63xx%2Fatf.git plat: imx7: Add PicoPi iMX7D basic support The PicoPi iMX7D is a 2 board development board consisting of a System-on-Module and a carrier baseboard and optimized for the Internet-of-Things (IoT). This patch add basic support to this board. Signed-off-by: Jun Nie Reviewed-by: Louis Mayencourt Change-Id: I009d85819c4f73b7063aab73d0f6ee74e6ef3fc4 --- diff --git a/plat/imx/common/include/imx_io_mux.h b/plat/imx/common/include/imx_io_mux.h index 9b304217..d588cfd6 100644 --- a/plat/imx/common/include/imx_io_mux.h +++ b/plat/imx/common/include/imx_io_mux.h @@ -1,5 +1,5 @@ /* - * Copyright 2018, ARM Limited and Contributors. All rights reserved. + * Copyright 2018-2019, ARM Limited and Contributors. All rights reserved. * * SPDX-License-Identifier: BSD-3-Clause */ @@ -8,6 +8,7 @@ #define IMX_IO_MUX_H #include +#include /* * i.MX 7Solo Applications Processor Reference Manual, Rev. 0.1, 08/2016 @@ -20,7 +21,10 @@ #define IOMUXC_SW_MUX_CTL_PAD_GPIO1_IO11_OFFSET 0x0020 #define IOMUXC_SW_MUX_CTL_PAD_GPIO1_IO12_OFFSET 0x0024 #define IOMUXC_SW_MUX_CTL_PAD_GPIO1_IO13_OFFSET 0x0028 + #define IOMUXC_SW_MUX_CTL_PAD_GPIO1_IO14_OFFSET 0x002C +#define IOMUXC_SW_MUX_CTL_PAD_GPIO1_IO14_ALT1_SD3_CD_B BIT(0) + #define IOMUXC_SW_MUX_CTL_PAD_GPIO1_IO15_OFFSET 0x0030 #define IOMUXC_SW_MUX_CTL_PAD_EPDC_DATA00_OFFSET 0x0034 @@ -121,8 +125,24 @@ #define IOMUXC_SW_MUX_CTL_PAD_I2C2_SDA_OFFSET 0x0154 #define IOMUXC_SW_MUX_CTL_PAD_I2C3_SCL_OFFSET 0x0158 #define IOMUXC_SW_MUX_CTL_PAD_I2C3_SDA_OFFSET 0x015C + #define IOMUXC_SW_MUX_CTL_PAD_I2C4_SCL_OFFSET 0x0160 +#define IOMUXC_SW_MUX_CTL_PAD_I2C4_SCL_ALT0_I2C4_SCL 0x0 +#define IOMUXC_SW_MUX_CTL_PAD_I2C4_SCL_ALT1_UART5_RX_DATA BIT(0) +#define IOMUXC_SW_MUX_CTL_PAD_I2C4_SCL_ALT2_WDOG4_WDOG_B BIT(1) +#define IOMUXC_SW_MUX_CTL_PAD_I2C4_SCL_ALT3_CSI_PIXCLK (BIT(1) | BIT(0)) +#define IOMUXC_SW_MUX_CTL_PAD_I2C4_SCL_ALT4_USB_OTG1_ID BIT(2) +#define IOMUXC_SW_MUX_CTL_PAD_I2C4_SCL_ALT5_GPIO4_IO14 (BIT(2) | BIT(0)) +#define IOMUXC_SW_MUX_CTL_PAD_I2C4_SCL_ALT6_EPDC_VCOM0 (BIT(2) | BIT(1)) + #define IOMUXC_SW_MUX_CTL_PAD_I2C4_SDA_OFFSET 0x0164 +#define IOMUXC_SW_MUX_CTL_PAD_I2C4_SDA_ALT0_I2C4_SDA 0x0 +#define IOMUXC_SW_MUX_CTL_PAD_I2C4_SDA_ALT1_UART5_TX_DATA BIT(0) +#define IOMUXC_SW_MUX_CTL_PAD_I2C4_SDA_ALT2_WDOG4_WDOG_RST_B_DEB BIT(1) +#define IOMUXC_SW_MUX_CTL_PAD_I2C4_SDA_ALT3_CSI_MCLK (BIT(1) | BIT(0)) +#define IOMUXC_SW_MUX_CTL_PAD_I2C4_SDA_ALT4_USB_OTG2_ID BIT(2) +#define IOMUXC_SW_MUX_CTL_PAD_I2C4_SDA_ALT5_GPIO4_IO15 (BIT(1) | BIT(0)) +#define IOMUXC_SW_MUX_CTL_PAD_I2C4_SDA_ALT6_EPDC_VCOM1 (BIT(2) | BIT(1)) #define IOMUXC_SW_MUX_CTL_PAD_ECSPI1_SCLK_OFFSET 0x0168 #define IOMUXC_SW_MUX_CTL_PAD_ECSPI1_SCLK_ALT0_ECSPI1_SCLK 0x00 @@ -165,6 +185,7 @@ #define IOMUXC_SW_MUX_CTL_PAD_SD2_DATA1_OFFSET 0x01C4 #define IOMUXC_SW_MUX_CTL_PAD_SD2_DATA2_OFFSET 0x01C8 #define IOMUXC_SW_MUX_CTL_PAD_SD2_DATA3_OFFSET 0x01CC + #define IOMUXC_SW_MUX_CTL_PAD_SD3_CLK_OFFSET 0x01D0 #define IOMUXC_SW_MUX_CTL_PAD_SD3_CMD_OFFSET 0x01D4 #define IOMUXC_SW_MUX_CTL_PAD_SD3_DATA0_OFFSET 0x01D8 @@ -391,6 +412,7 @@ #define IOMUXC_SW_PAD_CTL_PAD_SD2_DATA1_OFFSET 0x0434 #define IOMUXC_SW_PAD_CTL_PAD_SD2_DATA2_OFFSET 0x0438 #define IOMUXC_SW_PAD_CTL_PAD_SD2_DATA3_OFFSET 0x043C + #define IOMUXC_SW_PAD_CTL_PAD_SD3_CLK_OFFSET 0x0440 #define IOMUXC_SW_PAD_CTL_PAD_SD3_CMD_OFFSET 0x0444 #define IOMUXC_SW_PAD_CTL_PAD_SD3_DATA0_OFFSET 0x0448 @@ -403,6 +425,19 @@ #define IOMUXC_SW_PAD_CTL_PAD_SD3_DATA7_OFFSET 0x0464 #define IOMUXC_SW_PAD_CTL_PAD_SD3_STROBE_OFFSET 0x0468 #define IOMUXC_SW_PAD_CTL_PAD_SD3_RESET_B_OFFSET 0x046C +#define IOMUXC_SW_PAD_CTL_PAD_SD3_DSE_0_X1 0 +#define IOMUXC_SW_PAD_CTL_PAD_SD3_DSE_1_X4 BIT(0) +#define IOMUXC_SW_PAD_CTL_PAD_SD3_DSE_2_X2 BIT(1) +#define IOMUXC_SW_PAD_CTL_PAD_SD3_DSE_3_X6 (BIT(1) | BIT(0)) +#define IOMUXC_SW_PAD_CTL_PAD_SD3_DSE_1_X4 BIT(0) +#define IOMUXC_SW_PAD_CTL_PAD_SD3_SLEW_SLOW BIT(2) +#define IOMUXC_SW_PAD_CTL_PAD_SD3_SLEW_FAST 0 +#define IOMUXC_SW_PAD_CTL_PAD_SD3_HYS BIT(3) +#define IOMUXC_SW_PAD_CTL_PAD_SD3_PE BIT(4) +#define IOMUXC_SW_PAD_CTL_PAD_SD3_PD_100K (0 << 5) +#define IOMUXC_SW_PAD_CTL_PAD_SD3_PU_5K (1 << 5) +#define IOMUXC_SW_PAD_CTL_PAD_SD3_PU_47K (2 << 5) +#define IOMUXC_SW_PAD_CTL_PAD_SD3_PU_100K (3 << 5) #define IOMUXC_SW_PAD_CTL_PAD_SAI1_RX_DATA_OFFSET 0x0470 #define IOMUXC_SW_PAD_CTL_PAD_SAI1_TX_BCLK_OFFSET 0x0474 @@ -588,7 +623,15 @@ #define IOMUXC_UART4_RTS_B_SELECT_INPUT_OFFSET 0x0708 #define IOMUXC_UART4_RX_DATA_SELECT_INPUT_OFFSET 0x070C #define IOMUXC_UART5_RTS_B_SELECT_INPUT_OFFSET 0x0710 + #define IOMUXC_UART5_RX_DATA_SELECT_INPUT_OFFSET 0x0714 +#define IOMUXC_UART5_RX_DATA_SELECT_INPUT_I2C4_SCL_ALT1 0x00 +#define IOMUXC_UART5_RX_DATA_SELECT_INPUT_I2C4_SDA_ALT1 BIT(0) +#define IOMUXC_UART5_RX_DATA_SELECT_INPUT_SAI1_RX_DATA_ALT2 BIT(1) +#define IOMUXC_UART5_RX_DATA_SELECT_INPUT_SAI1_TX_BCLK_ALT2 (BIT(1) | BIT(0)) +#define IOMUXC_UART5_RX_DATA_SELECT_INPUT_GPIO1_IO06_ALT3 BIT(2) +#define IOMUXC_UART5_RX_DATA_SELECT_INPUT_GPIO1_IO07_ALT3 (BIT(2) | BIT(1)) + #define IOMUXC_UART6_RTS_B_SELECT_INPUT_OFFSET 0x0718 #define IOMUXC_UART6_RX_DATA_SELECT_INPUT_OFFSET 0x071C #define IOMUXC_UART7_RTS_B_SELECT_INPUT_OFFSET 0x0720 diff --git a/plat/imx/imx7/picopi/include/platform_def.h b/plat/imx/imx7/picopi/include/platform_def.h new file mode 100644 index 00000000..1af1d0cf --- /dev/null +++ b/plat/imx/imx7/picopi/include/platform_def.h @@ -0,0 +1,204 @@ +/* + * Copyright (c) 2018-2019, ARM Limited and Contributors. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef PLATFORM_DEF_H +#define PLATFORM_DEF_H + +#include +#include +#include + +#define PLATFORM_STACK_SIZE 0x1000 + +#define PLATFORM_MAX_CPUS_PER_CLUSTER 2 +#define PLATFORM_CLUSTER_COUNT 1 +#define PLATFORM_CLUSTER0_CORE_COUNT PLATFORM_MAX_CPUS_PER_CLUSTER + +#define PLATFORM_CORE_COUNT PLATFORM_CLUSTER0_CORE_COUNT + +#define PICOPI_PRIMARY_CPU 0 + +#define PLAT_NUM_PWR_DOMAINS (PLATFORM_CLUSTER_COUNT + \ + PLATFORM_CORE_COUNT) +#define PLAT_MAX_PWR_LVL MPIDR_AFFLVL1 + +#define PLAT_MAX_RET_STATE 1 +#define PLAT_MAX_OFF_STATE 2 + +/* Local power state for power domains in Run state. */ +#define PLAT_LOCAL_STATE_RUN 0 + +/* Local power state for retention. Valid only for CPU power domains */ +#define PLAT_LOCAL_STATE_RET 1 + +/* + * Local power state for OFF/power-down. Valid for CPU and cluster power + * domains. + */ +#define PLAT_LOCAL_STATE_OFF 2 + +/* + * Macros used to parse state information from State-ID if it is using the + * recommended encoding for State-ID. + */ +#define PLAT_LOCAL_PSTATE_WIDTH 4 +#define PLAT_LOCAL_PSTATE_MASK ((1 << PLAT_LOCAL_PSTATE_WIDTH) - 1) + +/* + * Some data must be aligned on the biggest cache line size in the platform. + * This is known only to the platform as it might have a combination of + * integrated and external caches. + * i.MX7 has a 32 byte cacheline size + * i.MX 7Dual Applications Processor Reference Manual, Rev. 1, 01/2018 pg 298 + */ +#define CACHE_WRITEBACK_SHIFT 4 +#define CACHE_WRITEBACK_GRANULE (1 << CACHE_WRITEBACK_SHIFT) + +/* + * Partition memory into secure BootROM, OCRAM_S, non-secure DRAM, secure DRAM + */ +#define BOOT_ROM_BASE 0x00000000 +#define BOOT_ROM_SIZE 0x00020000 + +#define OCRAM_S_BASE 0x00180000 +#define OCRAM_S_SIZE 0x00008000 + +/* Controller maps 2GB, board contains 512 MB. 0x80000000 - 0xa0000000 */ +#define DRAM_BASE 0x80000000 +#define DRAM_SIZE 0x20000000 +#define DRAM_LIMIT (DRAM_BASE + DRAM_SIZE) + +/* Place OPTEE at minus 32 MB from the end of memory. 0x9e000000 - 0xa0000000 */ +#define IMX7_OPTEE_SIZE 0x02000000 +#define IMX7_OPTEE_BASE (DRAM_LIMIT - IMX7_OPTEE_SIZE) +#define IMX7_OPTEE_LIMIT (IMX7_OPTEE_BASE + IMX7_OPTEE_SIZE) + +/* Place ATF directly beneath OPTEE. 0x9df00000 - 0x9e000000 */ +#define BL2_RAM_SIZE 0x00100000 +#define BL2_RAM_BASE (IMX7_OPTEE_BASE - BL2_RAM_SIZE) +#define BL2_RAM_LIMIT (BL2_RAM_BASE + BL2_RAM_SIZE) + +/* Optional Mailbox. Only relevant on i.MX7D. 0x9deff000 - 0x9df00000*/ +#define SHARED_RAM_SIZE 0x00001000 +#define SHARED_RAM_BASE (BL2_RAM_BASE - SHARED_RAM_SIZE) +#define SHARED_RAM_LIMIT (SHARED_RAM_BASE + SHARED_RAM_SIZE) + +/* Define the absolute location of u-boot 0x87800000 - 0x87900000 */ +#define IMX7_UBOOT_SIZE 0x00100000 +#define IMX7_UBOOT_BASE (DRAM_BASE + 0x7800000) +#define IMX7_UBOOT_LIMIT (IMX7_UBOOT_BASE + IMX7_UBOOT_SIZE) + +/* Define FIP image absolute location 0x80000000 - 0x80100000 */ +#define IMX7_FIP_SIZE 0x00100000 +#define IMX7_FIP_BASE (DRAM_BASE) +#define IMX7_FIP_LIMIT (IMX7_FIP_BASE + IMX7_FIP_SIZE) + +/* Define FIP image location at 1MB offset */ +#define IMX7_FIP_MMC_BASE (1024 * 1024) + +/* Define the absolute location of DTB 0x83000000 - 0x83100000 */ +#define IMX7_DTB_SIZE 0x00100000 +#define IMX7_DTB_BASE (DRAM_BASE + 0x03000000) +#define IMX7_DTB_LIMIT (IMX7_DTB_BASE + IMX7_DTB_SIZE) + +/* Define the absolute location of DTB Overlay 0x83100000 - 0x83101000 */ +#define IMX7_DTB_OVERLAY_SIZE 0x00001000 +#define IMX7_DTB_OVERLAY_BASE IMX7_DTB_LIMIT +#define IMX7_DTB_OVERLAY_LIMIT (IMX7_DTB_OVERLAY_BASE + \ + IMX7_DTB_OVERLAY_SIZE) +/* + * BL2 specific defines. + * + * Put BL2 just below BL3-1. BL2_BASE is calculated using the current BL2 debug + * size plus a little space for growth. + */ +#define BL2_BASE BL2_RAM_BASE +#define BL2_LIMIT (BL2_RAM_BASE + BL2_RAM_SIZE) + +/* + * BL3-2/OPTEE + */ +# define BL32_BASE IMX7_OPTEE_BASE +# define BL32_LIMIT (IMX7_OPTEE_BASE + IMX7_OPTEE_SIZE) + +/* + * BL3-3/U-BOOT + */ +#define BL33_BASE IMX7_UBOOT_BASE +#define BL33_LIMIT (IMX7_UBOOT_BASE + IMX7_UBOOT_SIZE) + +/* + * ATF's view of memory + * + * 0xa0000000 +-----------------+ + * | DDR | BL32/OPTEE + * 0x9e000000 +-----------------+ + * | DDR | BL23 ATF + * 0x9df00000 +-----------------+ + * | DDR | Shared MBOX RAM + * 0x9de00000 +-----------------+ + * | DDR | Unallocated + * 0x87900000 +-----------------+ + * | DDR | BL33/U-BOOT + * 0x87800000 +-----------------+ + * | DDR | Unallocated + * 0x83100000 +-----------------+ + * | DDR | DTB + * 0x83000000 +-----------------+ + * | DDR | Unallocated + * 0x80100000 +-----------------+ + * | DDR | FIP + * 0x80000000 +-----------------+ + * | SOC I/0 | + * 0x00a00000 +-----------------+ + * | OCRAM | Not used + * 0x00900000 +-----------------+ + * | SOC I/0 | + * 0x00188000 +-----------------+ + * | OCRAM_S | Not used + * 0x00180000 +-----------------+ + * | SOC I/0 | + * 0x00020000 +-----------------+ + * | BootROM | BL1 + * 0x00000000 +-----------------+ + */ + +#define PLAT_PHY_ADDR_SPACE_SIZE (1ULL << 32) +#define PLAT_VIRT_ADDR_SPACE_SIZE (1ULL << 32) +#define MAX_MMAP_REGIONS 10 +#define MAX_XLAT_TABLES 6 +#define MAX_IO_DEVICES 2 +#define MAX_IO_HANDLES 3 +#define MAX_IO_BLOCK_DEVICES 1 + +/* UART defines */ +#define PLAT_IMX7_BOOT_UART_BASE MXC_UART5_BASE +#define PLAT_IMX7_BOOT_UART_CLK_IN_HZ 24000000 +#define PLAT_IMX7_CONSOLE_BAUDRATE 115200 + +/* MMC defines */ +#ifndef PLAT_PICOPI_SD +#define PLAT_PICOPI_SD 3 +#endif + +#if PLAT_PICOPI_SD == 1 +#define PLAT_PICOPI_BOOT_MMC_BASE USDHC1_BASE +#endif /* PLAT_PICOPI_SD == 1 */ + +#if PLAT_PICOPI_SD == 2 +#define PLAT_PICOPI_BOOT_MMC_BASE USDHC2_BASE +#endif /* PLAT_PICOPI_SD == 2 */ + +#if PLAT_PICOPI_SD == 3 +#define PLAT_PICOPI_BOOT_MMC_BASE USDHC3_BASE +#endif /* PLAT_PICOPI_SD == 3 */ + +/* + * System counter + */ +#define SYS_COUNTER_FREQ_IN_TICKS 8000000 /* 8 MHz */ + +#endif /* PLATFORM_DEF_H */ diff --git a/plat/imx/imx7/picopi/picopi_bl2_el3_setup.c b/plat/imx/imx7/picopi/picopi_bl2_el3_setup.c new file mode 100644 index 00000000..3cf5c360 --- /dev/null +++ b/plat/imx/imx7/picopi/picopi_bl2_el3_setup.c @@ -0,0 +1,133 @@ +/* + * Copyright (c) 2018-2019, ARM Limited and Contributors. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include + +#include + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#define UART5_CLK_SELECT (CCM_TARGET_ROOT_ENABLE |\ + CCM_TRGT_MUX_UART5_CLK_ROOT_OSC_24M) + +#define USDHC_CLK_SELECT (CCM_TARGET_ROOT_ENABLE |\ + CCM_TRGT_MUX_NAND_USDHC_BUS_CLK_ROOT_AHB |\ + CCM_TARGET_POST_PODF(2)) + +#define USB_CLK_SELECT (CCM_TARGET_ROOT_ENABLE |\ + CCM_TRGT_MUX_USB_HSIC_CLK_ROOT_SYS_PLL) + +#define PICOPI_UART5_RX_MUX \ + IOMUXC_SW_MUX_CTL_PAD_I2C4_SCL_ALT1_UART5_RX_DATA + +#define PICOPI_UART5_TX_MUX \ + IOMUXC_SW_MUX_CTL_PAD_I2C4_SDA_ALT1_UART5_TX_DATA + +#define PICOPI_SD3_FEATURES \ + (IOMUXC_SW_PAD_CTL_PAD_SD3_PU_47K | \ + IOMUXC_SW_PAD_CTL_PAD_SD3_PE | \ + IOMUXC_SW_PAD_CTL_PAD_SD3_HYS | \ + IOMUXC_SW_PAD_CTL_PAD_SD3_SLEW_SLOW | \ + IOMUXC_SW_PAD_CTL_PAD_SD3_DSE_3_X6) + +static void picopi_setup_pinmux(void) +{ + /* Configure UART5 TX */ + imx_io_muxc_set_pad_alt_function(IOMUXC_SW_MUX_CTL_PAD_I2C4_SDA_OFFSET, + PICOPI_UART5_TX_MUX); + /* Configure UART5 RX */ + imx_io_muxc_set_pad_alt_function(IOMUXC_SW_MUX_CTL_PAD_I2C4_SCL_OFFSET, + PICOPI_UART5_RX_MUX); + + /* Configure USDHC3 */ + imx_io_muxc_set_pad_alt_function(IOMUXC_SW_MUX_CTL_PAD_SD3_CLK_OFFSET, 0); + imx_io_muxc_set_pad_alt_function(IOMUXC_SW_MUX_CTL_PAD_SD3_CMD_OFFSET, 0); + imx_io_muxc_set_pad_alt_function(IOMUXC_SW_MUX_CTL_PAD_SD3_DATA0_OFFSET, 0); + imx_io_muxc_set_pad_alt_function(IOMUXC_SW_MUX_CTL_PAD_SD3_DATA1_OFFSET, 0); + imx_io_muxc_set_pad_alt_function(IOMUXC_SW_MUX_CTL_PAD_SD3_DATA2_OFFSET, 0); + imx_io_muxc_set_pad_alt_function(IOMUXC_SW_MUX_CTL_PAD_SD3_DATA3_OFFSET, 0); + imx_io_muxc_set_pad_alt_function(IOMUXC_SW_MUX_CTL_PAD_SD3_DATA4_OFFSET, 0); + imx_io_muxc_set_pad_alt_function(IOMUXC_SW_MUX_CTL_PAD_SD3_DATA5_OFFSET, 0); + imx_io_muxc_set_pad_alt_function(IOMUXC_SW_MUX_CTL_PAD_SD3_DATA6_OFFSET, 0); + imx_io_muxc_set_pad_alt_function(IOMUXC_SW_MUX_CTL_PAD_SD3_DATA7_OFFSET, 0); + imx_io_muxc_set_pad_alt_function(IOMUXC_SW_MUX_CTL_PAD_GPIO1_IO14_OFFSET, + IOMUXC_SW_MUX_CTL_PAD_GPIO1_IO14_ALT1_SD3_CD_B); + + imx_io_muxc_set_pad_features(IOMUXC_SW_PAD_CTL_PAD_SD3_CLK_OFFSET, + PICOPI_SD3_FEATURES); + imx_io_muxc_set_pad_features(IOMUXC_SW_PAD_CTL_PAD_SD3_CMD_OFFSET, + PICOPI_SD3_FEATURES); + imx_io_muxc_set_pad_features(IOMUXC_SW_PAD_CTL_PAD_SD3_DATA0_OFFSET, + PICOPI_SD3_FEATURES); + imx_io_muxc_set_pad_features(IOMUXC_SW_PAD_CTL_PAD_SD3_DATA1_OFFSET, + PICOPI_SD3_FEATURES); + imx_io_muxc_set_pad_features(IOMUXC_SW_PAD_CTL_PAD_SD3_DATA2_OFFSET, + PICOPI_SD3_FEATURES); + imx_io_muxc_set_pad_features(IOMUXC_SW_PAD_CTL_PAD_SD3_DATA3_OFFSET, + PICOPI_SD3_FEATURES); + imx_io_muxc_set_pad_features(IOMUXC_SW_PAD_CTL_PAD_SD3_DATA4_OFFSET, + PICOPI_SD3_FEATURES); + imx_io_muxc_set_pad_features(IOMUXC_SW_PAD_CTL_PAD_SD3_DATA5_OFFSET, + PICOPI_SD3_FEATURES); + imx_io_muxc_set_pad_features(IOMUXC_SW_PAD_CTL_PAD_SD3_DATA6_OFFSET, + PICOPI_SD3_FEATURES); + imx_io_muxc_set_pad_features(IOMUXC_SW_PAD_CTL_PAD_SD3_DATA7_OFFSET, + PICOPI_SD3_FEATURES); + imx_io_muxc_set_pad_features(IOMUXC_SW_PAD_CTL_PAD_GPIO1_IO14_OFFSET, + PICOPI_SD3_FEATURES); +} + +static void picopi_usdhc_setup(void) +{ + imx_usdhc_params_t params; + struct mmc_device_info info; + + zeromem(¶ms, sizeof(imx_usdhc_params_t)); + params.reg_base = PLAT_PICOPI_BOOT_MMC_BASE; + params.clk_rate = 25000000; + params.bus_width = MMC_BUS_WIDTH_8; + info.mmc_dev_type = MMC_IS_EMMC; + imx_usdhc_init(¶ms, &info); +} + +static void picopi_setup_usb_clocks(void) +{ + uint32_t usb_en_bits = (uint32_t)USB_CLK_SELECT; + + imx_clock_set_usb_clk_root_bits(usb_en_bits); + imx_clock_enable_usb(CCM_CCGR_ID_USB_IPG); + imx_clock_enable_usb(CCM_CCGR_ID_USB_PHY_480MCLK); + imx_clock_enable_usb(CCM_CCGR_ID_USB_OTG1_PHY); + imx_clock_enable_usb(CCM_CCGR_ID_USB_OTG2_PHY); +} + +void imx7_platform_setup(u_register_t arg1, u_register_t arg2, + u_register_t arg3, u_register_t arg4) +{ + uint32_t uart5_en_bits = (uint32_t)UART5_CLK_SELECT; + uint32_t usdhc_clock_sel = PLAT_PICOPI_SD - 1; + + /* Initialize clocks etc */ + imx_clock_enable_uart(4, uart5_en_bits); + imx_clock_enable_usdhc(usdhc_clock_sel, USDHC_CLK_SELECT); + + picopi_setup_usb_clocks(); + + /* Setup pin-muxes */ + picopi_setup_pinmux(); + + picopi_usdhc_setup(); +} diff --git a/plat/imx/imx7/picopi/platform.mk b/plat/imx/imx7/picopi/platform.mk new file mode 100644 index 00000000..5901001e --- /dev/null +++ b/plat/imx/imx7/picopi/platform.mk @@ -0,0 +1,40 @@ +# +# Copyright (c) 2018-2019, ARM Limited and Contributors. All rights reserved. +# +# SPDX-License-Identifier: BSD-3-Clause +# + +# Include imx7 common +include plat/imx/imx7/common/imx7.mk + +# Platform +PLAT_INCLUDES += -Iplat/imx/imx7/picopi/include \ + +BL2_SOURCES += drivers/imx/usdhc/imx_usdhc.c \ + plat/imx/imx7/picopi/picopi_bl2_el3_setup.c \ + +# Build config flags +# ------------------ + +ARM_CORTEX_A7 := yes +WORKAROUND_CVE_2017_5715 := 0 + +RESET_TO_BL31 := 0 + +# Non-TF Boot ROM +BL2_AT_EL3 := 1 + +# Indicate single-core +COLD_BOOT_SINGLE_CPU := 1 + +# Have different sections for code and rodata +SEPARATE_CODE_AND_RODATA := 1 + +# Use Coherent memory +USE_COHERENT_MEM := 1 + +# Use multi console API +MULTI_CONSOLE_API := 1 + +PLAT_PICOPI_UART :=5 +$(eval $(call add_define,PLAT_PICOPI_UART))