From: Mauro Carvalho Chehab Date: Fri, 17 Jan 2014 14:36:17 +0000 (-0300) Subject: [media] drx-j: Replace printk's by pr_foo() X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=935c6654044b2c7e1176464daf9957c805f6b8a3;p=openwrt%2Fstaging%2Fblogic.git [media] drx-j: Replace printk's by pr_foo() Instead of using printk's, use the pr_foo() macros. That fixes some checkpatch warnings and provide a better error, warning and debug support. Acked-by: Devin Heitmueller Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/dvb-frontends/drx39xyj/drx39xxj.c b/drivers/media/dvb-frontends/drx39xyj/drx39xxj.c index 6db009e2d705..e5f276f5d215 100644 --- a/drivers/media/dvb-frontends/drx39xyj/drx39xxj.c +++ b/drivers/media/dvb-frontends/drx39xyj/drx39xxj.c @@ -19,6 +19,8 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.= */ +#define pr_fmt(fmt) KBUILD_MODNAME ":%s: " fmt, __func__ + #include #include #include @@ -44,7 +46,7 @@ static int drx39xxj_set_powerstate(struct dvb_frontend *fe, int enable) result = drx_ctrl(demod, DRX_CTRL_POWER_MODE, &power_mode); if (result != 0) { - printk(KERN_ERR "Power state change failed\n"); + pr_err("Power state change failed\n"); return 0; } @@ -63,14 +65,14 @@ static int drx39xxj_read_status(struct dvb_frontend *fe, fe_status_t *status) result = drx_ctrl(demod, DRX_CTRL_LOCK_STATUS, &lock_status); if (result != 0) { - printk(KERN_ERR "drx39xxj: could not get lock status!\n"); + pr_err("drx39xxj: could not get lock status!\n"); *status = 0; } switch (lock_status) { case DRX_NEVER_LOCK: *status = 0; - printk(KERN_ERR "drx says NEVER_LOCK\n"); + pr_err("drx says NEVER_LOCK\n"); break; case DRX_NOT_LOCKED: *status = 0; @@ -93,7 +95,7 @@ static int drx39xxj_read_status(struct dvb_frontend *fe, fe_status_t *status) | FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK; break; default: - printk(KERN_ERR "Lock state unknown %d\n", lock_status); + pr_err("Lock state unknown %d\n", lock_status); } return 0; @@ -108,7 +110,7 @@ static int drx39xxj_read_ber(struct dvb_frontend *fe, u32 *ber) result = drx_ctrl(demod, DRX_CTRL_SIG_QUALITY, &sig_quality); if (result != 0) { - printk(KERN_ERR "drx39xxj: could not get ber!\n"); + pr_err("drx39xxj: could not get ber!\n"); *ber = 0; return 0; } @@ -127,7 +129,7 @@ static int drx39xxj_read_signal_strength(struct dvb_frontend *fe, result = drx_ctrl(demod, DRX_CTRL_SIG_QUALITY, &sig_quality); if (result != 0) { - printk(KERN_ERR "drx39xxj: could not get signal strength!\n"); + pr_err("drx39xxj: could not get signal strength!\n"); *strength = 0; return 0; } @@ -146,7 +148,7 @@ static int drx39xxj_read_snr(struct dvb_frontend *fe, u16 *snr) result = drx_ctrl(demod, DRX_CTRL_SIG_QUALITY, &sig_quality); if (result != 0) { - printk(KERN_ERR "drx39xxj: could not read snr!\n"); + pr_err("drx39xxj: could not read snr!\n"); *snr = 0; return 0; } @@ -164,7 +166,7 @@ static int drx39xxj_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) result = drx_ctrl(demod, DRX_CTRL_SIG_QUALITY, &sig_quality); if (result != 0) { - printk(KERN_ERR "drx39xxj: could not get uc blocks!\n"); + pr_err("drx39xxj: could not get uc blocks!\n"); *ucblocks = 0; return 0; } @@ -218,7 +220,7 @@ static int drx39xxj_set_frontend(struct dvb_frontend *fe) /* Set the standard (will be powered up if necessary */ result = drx_ctrl(demod, DRX_CTRL_SET_STANDARD, &standard); if (result != 0) { - printk(KERN_ERR "Failed to set standard! result=%02x\n", + pr_err("Failed to set standard! result=%02x\n", result); return -EINVAL; } @@ -235,7 +237,7 @@ static int drx39xxj_set_frontend(struct dvb_frontend *fe) /* program channel */ result = drx_ctrl(demod, DRX_CTRL_SET_CHANNEL, &channel); if (result != 0) { - printk(KERN_ERR "Failed to set channel!\n"); + pr_err("Failed to set channel!\n"); return -EINVAL; } /* Just for giggles, let's shut off the LNA again.... */ @@ -243,14 +245,14 @@ static int drx39xxj_set_frontend(struct dvb_frontend *fe) uio_data.value = false; result = drx_ctrl(demod, DRX_CTRL_UIO_WRITE, &uio_data); if (result != 0) { - printk(KERN_ERR "Failed to disable LNA!\n"); + pr_err("Failed to disable LNA!\n"); return 0; } #ifdef DJH_DEBUG for (i = 0; i < 2000; i++) { fe_status_t status; drx39xxj_read_status(fe, &status); - printk(KERN_DBG "i=%d status=%d\n", i, status); + pr_dbg("i=%d status=%d\n", i, status); msleep(100); i += 100; } @@ -273,7 +275,7 @@ static int drx39xxj_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) int result; #ifdef DJH_DEBUG - printk(KERN_DBG "i2c gate call: enable=%d state=%d\n", enable, + pr_dbg("i2c gate call: enable=%d state=%d\n", enable, state->i2c_gate_open); #endif @@ -289,7 +291,7 @@ static int drx39xxj_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) result = drx_ctrl(demod, DRX_CTRL_I2C_BRIDGE, &i2c_gate_state); if (result != 0) { - printk(KERN_ERR "drx39xxj: could not open i2c gate [%d]\n", + pr_err("drx39xxj: could not open i2c gate [%d]\n", result); dump_stack(); } else { @@ -383,7 +385,7 @@ struct dvb_frontend *drx39xxj_attach(struct i2c_adapter *i2c) result = drx_open(demod); if (result != 0) { - printk(KERN_ERR "DRX open failed! Aborting\n"); + pr_err("DRX open failed! Aborting\n"); kfree(state); return NULL; } @@ -394,7 +396,7 @@ struct dvb_frontend *drx39xxj_attach(struct i2c_adapter *i2c) /* Configure user-I/O #3: enable read/write */ result = drx_ctrl(demod, DRX_CTRL_UIO_CFG, &uio_cfg); if (result != 0) { - printk(KERN_ERR "Failed to setup LNA GPIO!\n"); + pr_err("Failed to setup LNA GPIO!\n"); return NULL; } @@ -402,7 +404,7 @@ struct dvb_frontend *drx39xxj_attach(struct i2c_adapter *i2c) uio_data.value = false; result = drx_ctrl(demod, DRX_CTRL_UIO_WRITE, &uio_data); if (result != 0) { - printk(KERN_ERR "Failed to disable LNA!\n"); + pr_err("Failed to disable LNA!\n"); return NULL; } diff --git a/drivers/media/dvb-frontends/drx39xyj/drx39xxj_dummy.c b/drivers/media/dvb-frontends/drx39xyj/drx39xxj_dummy.c index 854077419118..c5187a14a03f 100644 --- a/drivers/media/dvb-frontends/drx39xyj/drx39xxj_dummy.c +++ b/drivers/media/dvb-frontends/drx39xyj/drx39xxj_dummy.c @@ -1,3 +1,5 @@ +#define pr_fmt(fmt) KBUILD_MODNAME ":%s: " fmt, __func__ + #include #include #include @@ -99,11 +101,11 @@ int drxbsp_i2c_write_read(struct i2c_device_addr *w_dev_addr, } if (state->i2c == NULL) { - printk("i2c was zero, aborting\n"); + pr_err("i2c was zero, aborting\n"); return 0; } if (i2c_transfer(state->i2c, msg, num_msgs) != num_msgs) { - printk(KERN_WARNING "drx3933: I2C write/read failed\n"); + pr_warn("drx3933: I2C write/read failed\n"); return -EREMOTEIO; } @@ -119,11 +121,11 @@ int drxbsp_i2c_write_read(struct i2c_device_addr *w_dev_addr, .flags = I2C_M_RD, .buf = r_data, .len = r_count}, }; - printk("drx3933 i2c operation addr=%x i2c=%p, wc=%x rc=%x\n", + pr_dbg("drx3933 i2c operation addr=%x i2c=%p, wc=%x rc=%x\n", w_dev_addr->i2c_addr, state->i2c, w_count, r_count); if (i2c_transfer(state->i2c, msg, 2) != 2) { - printk(KERN_WARNING "drx3933: I2C write/read failed\n"); + pr_warn("drx3933: I2C write/read failed\n"); return -EREMOTEIO; } #endif diff --git a/drivers/media/dvb-frontends/drx39xyj/drxj.c b/drivers/media/dvb-frontends/drx39xyj/drxj.c index 811e09c61ba1..aafe6dffdab5 100644 --- a/drivers/media/dvb-frontends/drx39xyj/drxj.c +++ b/drivers/media/dvb-frontends/drx39xyj/drxj.c @@ -35,7 +35,7 @@ INCLUDE FILES ----------------------------------------------------------------------------*/ -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +#define pr_fmt(fmt) KBUILD_MODNAME ":%s: " fmt, __func__ #include "drxj.h" #include "drxj_map.h"