From: John Crispin <john@openwrt.org>
Date: Thu, 17 Dec 2015 09:27:24 +0000 (+0000)
Subject: ath9k: Allow configuration of LED polarity in platform data.
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=932bc8d5eb1e5666eb967f3adeddceb22081b880;p=openwrt%2Fstaging%2Frobimarko.git

ath9k: Allow configuration of LED polarity in platform data.

Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>

SVN-Revision: 47910
---

diff --git a/package/kernel/mac80211/patches/532-ath9k_get_led_polarity_from_platform_data.patch b/package/kernel/mac80211/patches/532-ath9k_get_led_polarity_from_platform_data.patch
new file mode 100644
index 0000000000..3523adeb1a
--- /dev/null
+++ b/package/kernel/mac80211/patches/532-ath9k_get_led_polarity_from_platform_data.patch
@@ -0,0 +1,20 @@
+--- a/include/linux/ath9k_platform.h
++++ b/include/linux/ath9k_platform.h
+@@ -36,6 +36,7 @@ struct ath9k_platform_data {
+ 	bool tx_gain_buffalo;
+ 	bool disable_2ghz;
+ 	bool disable_5ghz;
++	bool led_active_high;
+ 
+ 	int (*get_mac_revision)(void);
+ 	int (*external_reset)(void);
+--- a/drivers/net/wireless/ath/ath9k/init.c
++++ b/drivers/net/wireless/ath/ath9k/init.c
+@@ -577,6 +577,7 @@ static int ath9k_init_softc(u16 devid, struct ath_softc *sc,
+ 		ah->external_reset = pdata->external_reset;
+ 		ah->disable_2ghz = pdata->disable_2ghz;
+ 		ah->disable_5ghz = pdata->disable_5ghz;
++		ah->config.led_active_high = pdata->led_active_high;
+ 		if (!pdata->endian_check)
+ 			ah->ah_flags |= AH_NO_EEP_SWAP;
+ 	}
diff --git a/package/kernel/mac80211/patches/543-ath9k_entropy_from_adc.patch b/package/kernel/mac80211/patches/543-ath9k_entropy_from_adc.patch
index fa8eca5672..ace6fa9b5d 100644
--- a/package/kernel/mac80211/patches/543-ath9k_entropy_from_adc.patch
+++ b/package/kernel/mac80211/patches/543-ath9k_entropy_from_adc.patch
@@ -55,7 +55,7 @@
  	ops->spectral_scan_config = ar9003_hw_spectral_scan_config;
 --- a/drivers/net/wireless/ath/ath9k/init.c
 +++ b/drivers/net/wireless/ath/ath9k/init.c
-@@ -710,7 +710,8 @@ static void ath9k_init_txpower_limits(st
+@@ -711,7 +711,8 @@ static void ath9k_init_txpower_limits(st
  	if (ah->caps.hw_caps & ATH9K_HW_CAP_5GHZ)
  		ath9k_init_band_txpower(sc, IEEE80211_BAND_5GHZ);
  
@@ -65,7 +65,7 @@
  }
  
  static const struct ieee80211_iface_limit if_limits[] = {
-@@ -910,6 +911,18 @@ static void ath9k_set_hw_capab(struct at
+@@ -911,6 +912,18 @@ static void ath9k_set_hw_capab(struct at
  	SET_IEEE80211_PERM_ADDR(hw, common->macaddr);
  }
  
@@ -84,7 +84,7 @@
  int ath9k_init_device(u16 devid, struct ath_softc *sc,
  		    const struct ath_bus_ops *bus_ops)
  {
-@@ -955,6 +968,8 @@ int ath9k_init_device(u16 devid, struct
+@@ -956,6 +969,8 @@ int ath9k_init_device(u16 devid, struct
  		ARRAY_SIZE(ath9k_tpt_blink));
  #endif
  
diff --git a/target/linux/generic/files/include/linux/ath9k_platform.h b/target/linux/generic/files/include/linux/ath9k_platform.h
index 9fa70167e6..30ce2165cb 100644
--- a/target/linux/generic/files/include/linux/ath9k_platform.h
+++ b/target/linux/generic/files/include/linux/ath9k_platform.h
@@ -36,6 +36,7 @@ struct ath9k_platform_data {
 	bool tx_gain_buffalo;
 	bool disable_2ghz;
 	bool disable_5ghz;
+	bool led_active_high;
 
 	int (*get_mac_revision)(void);
 	int (*external_reset)(void);