From: Gabor Juhos Date: Wed, 2 May 2012 19:17:58 +0000 (+0000) Subject: ramips: Make serial console for DIR-300-B1 work again X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=930980102ac68882a7ace6a5ffe39b088f69cbce;p=openwrt%2Fsvn-archive%2Farchive.git ramips: Make serial console for DIR-300-B1 work again Make serial console for DIR-300-B1 work again. With some recent change, "console=ttyS1,57600" was removed from the default kernel command line, this adds the necessary mkcmdline incantation to image/Makefile to add it there for this target. This is quite likely broken for other targets as well. Without this the console switches to ttyS0 instead of ttyS1 and kernel output is missing, and the userspace comes up with 9600 baud instead of 57600. Signed-off-by: Tobias Diedrich SVN-Revision: 31556 --- diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 3d4d64933b..88b20fa3d8 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -158,14 +158,14 @@ mtdlayout_dir300b1=192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,896k(kernel),288 mtd_dir300b1_kernel_part_size=917504 mtd_dir300b1_rootfs_part_size=2949120 define BuildFirmware/DIR300B1 - $(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(call mkmtd/phys,$(mtdlayout_dir300b1)),$(mtd_dir300b1_kernel_part_size),$(mtd_dir300b1_rootfs_part_size)) + $(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),ttyS1,57600) $(call mkmtd/phys,$(mtdlayout_dir300b1)),$(mtd_dir300b1_kernel_part_size),$(mtd_dir300b1_rootfs_part_size)) mkwrgimg -s $(4) -d /dev/mtdblock/2 \ -i $(call sysupname,$(1),$(2)) \ -o $(call imgname,$(1),$(2))-factory.bin endef define BuildFirmware/DIR300B1/initramfs - $(call BuildFirmware/Generic/initramfs,$(1),$(2),board=$(3) $(call mkmtd/phys,$(mtdlayout_dir300b1)),$(mtd_dir300b1_kernel_part_size),$(mtd_dir300b1_rootfs_part_size)) + $(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),ttyS1,57600) $(call mkmtd/phys,$(mtdlayout_dir300b1)),$(mtd_dir300b1_kernel_part_size),$(mtd_dir300b1_rootfs_part_size)) endef define BuildFirmware/Edimax