From: Brian Norris Date: Wed, 9 Apr 2014 01:56:06 +0000 (-0700) Subject: mtd: st_spi_fsm: replace FLACH_CMD_* with SPINOR_OP_* X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=92d3af9ac369faf3bd2c409cf5218510500af214;p=openwrt%2Fstaging%2Fblogic.git mtd: st_spi_fsm: replace FLACH_CMD_* with SPINOR_OP_* Begin to unify the differences between serial_flash_cmds.h and spi-nor.h. Signed-off-by: Brian Norris Acked-by: Lee Jones Reviewed-by: Marek Vasut --- diff --git a/drivers/mtd/devices/serial_flash_cmds.h b/drivers/mtd/devices/serial_flash_cmds.h index 4f0c2c7c898e..82fa1687a2d3 100644 --- a/drivers/mtd/devices/serial_flash_cmds.h +++ b/drivers/mtd/devices/serial_flash_cmds.h @@ -13,43 +13,43 @@ #define _MTD_SERIAL_FLASH_CMDS_H /* Generic Flash Commands/OPCODEs */ -#define FLASH_CMD_WREN 0x06 -#define FLASH_CMD_WRDI 0x04 -#define FLASH_CMD_RDID 0x9f -#define FLASH_CMD_RDSR 0x05 -#define FLASH_CMD_RDSR2 0x35 -#define FLASH_CMD_WRSR 0x01 -#define FLASH_CMD_SE_4K 0x20 -#define FLASH_CMD_SE_32K 0x52 -#define FLASH_CMD_SE 0xd8 -#define FLASH_CMD_CHIPERASE 0xc7 -#define FLASH_CMD_WRVCR 0x81 -#define FLASH_CMD_RDVCR 0x85 +#define SPINOR_OP_WREN 0x06 +#define SPINOR_OP_WRDI 0x04 +#define SPINOR_OP_RDID 0x9f +#define SPINOR_OP_RDSR 0x05 +#define SPINOR_OP_RDSR2 0x35 +#define SPINOR_OP_WRSR 0x01 +#define SPINOR_OP_SE_4K 0x20 +#define SPINOR_OP_SE_32K 0x52 +#define SPINOR_OP_SE 0xd8 +#define SPINOR_OP_CHIPERASE 0xc7 +#define SPINOR_OP_WRVCR 0x81 +#define SPINOR_OP_RDVCR 0x85 /* JEDEC Standard - Serial Flash Discoverable Parmeters (SFDP) Commands */ -#define FLASH_CMD_READ 0x03 /* READ */ -#define FLASH_CMD_READ_FAST 0x0b /* FAST READ */ -#define FLASH_CMD_READ_1_1_2 0x3b /* DUAL OUTPUT READ */ -#define FLASH_CMD_READ_1_2_2 0xbb /* DUAL I/O READ */ -#define FLASH_CMD_READ_1_1_4 0x6b /* QUAD OUTPUT READ */ -#define FLASH_CMD_READ_1_4_4 0xeb /* QUAD I/O READ */ +#define SPINOR_OP_READ 0x03 /* READ */ +#define SPINOR_OP_READ_FAST 0x0b /* FAST READ */ +#define SPINOR_OP_READ_1_1_2 0x3b /* DUAL OUTPUT READ */ +#define SPINOR_OP_READ_1_2_2 0xbb /* DUAL I/O READ */ +#define SPINOR_OP_READ_1_1_4 0x6b /* QUAD OUTPUT READ */ +#define SPINOR_OP_READ_1_4_4 0xeb /* QUAD I/O READ */ -#define FLASH_CMD_WRITE 0x02 /* PAGE PROGRAM */ -#define FLASH_CMD_WRITE_1_1_2 0xa2 /* DUAL INPUT PROGRAM */ -#define FLASH_CMD_WRITE_1_2_2 0xd2 /* DUAL INPUT EXT PROGRAM */ -#define FLASH_CMD_WRITE_1_1_4 0x32 /* QUAD INPUT PROGRAM */ -#define FLASH_CMD_WRITE_1_4_4 0x12 /* QUAD INPUT EXT PROGRAM */ +#define SPINOR_OP_WRITE 0x02 /* PAGE PROGRAM */ +#define SPINOR_OP_WRITE_1_1_2 0xa2 /* DUAL INPUT PROGRAM */ +#define SPINOR_OP_WRITE_1_2_2 0xd2 /* DUAL INPUT EXT PROGRAM */ +#define SPINOR_OP_WRITE_1_1_4 0x32 /* QUAD INPUT PROGRAM */ +#define SPINOR_OP_WRITE_1_4_4 0x12 /* QUAD INPUT EXT PROGRAM */ -#define FLASH_CMD_EN4B_ADDR 0xb7 /* Enter 4-byte address mode */ -#define FLASH_CMD_EX4B_ADDR 0xe9 /* Exit 4-byte address mode */ +#define SPINOR_OP_EN4B_ADDR 0xb7 /* Enter 4-byte address mode */ +#define SPINOR_OP_EX4B_ADDR 0xe9 /* Exit 4-byte address mode */ /* READ commands with 32-bit addressing */ -#define FLASH_CMD_READ4 0x13 -#define FLASH_CMD_READ4_FAST 0x0c -#define FLASH_CMD_READ4_1_1_2 0x3c -#define FLASH_CMD_READ4_1_2_2 0xbc -#define FLASH_CMD_READ4_1_1_4 0x6c -#define FLASH_CMD_READ4_1_4_4 0xec +#define SPINOR_OP_READ4 0x13 +#define SPINOR_OP_READ4_FAST 0x0c +#define SPINOR_OP_READ4_1_1_2 0x3c +#define SPINOR_OP_READ4_1_2_2 0xbc +#define SPINOR_OP_READ4_1_1_4 0x6c +#define SPINOR_OP_READ4_1_4_4 0xec /* Configuration flags */ #define FLASH_FLAG_SINGLE 0x000000ff diff --git a/drivers/mtd/devices/st_spi_fsm.c b/drivers/mtd/devices/st_spi_fsm.c index 122a8a14ef84..fc193a94307d 100644 --- a/drivers/mtd/devices/st_spi_fsm.c +++ b/drivers/mtd/devices/st_spi_fsm.c @@ -208,7 +208,7 @@ #define S25FL_CMD_DYBWR 0xe1 #define S25FL_CMD_DYBRD 0xe0 #define S25FL_CMD_WRITE4 0x12 /* Note, opcode clashes with - * 'FLASH_CMD_WRITE_1_4_4' + * 'SPINOR_OP_WRITE_1_4_4' * as found on N25Qxxx devices! */ /* Status register */ @@ -296,7 +296,7 @@ struct flash_info { u32 jedec_id; u16 ext_id; /* - * The size listed here is what works with FLASH_CMD_SE, which isn't + * The size listed here is what works with SPINOR_OP_SE, which isn't * necessarily called a "sector" by the vendor. */ unsigned sector_size; @@ -451,22 +451,22 @@ static struct flash_info flash_types[] = { /* Default READ configurations, in order of preference */ static struct seq_rw_config default_read_configs[] = { - {FLASH_FLAG_READ_1_4_4, FLASH_CMD_READ_1_4_4, 0, 4, 4, 0x00, 2, 4}, - {FLASH_FLAG_READ_1_1_4, FLASH_CMD_READ_1_1_4, 0, 1, 4, 0x00, 4, 0}, - {FLASH_FLAG_READ_1_2_2, FLASH_CMD_READ_1_2_2, 0, 2, 2, 0x00, 4, 0}, - {FLASH_FLAG_READ_1_1_2, FLASH_CMD_READ_1_1_2, 0, 1, 2, 0x00, 0, 8}, - {FLASH_FLAG_READ_FAST, FLASH_CMD_READ_FAST, 0, 1, 1, 0x00, 0, 8}, - {FLASH_FLAG_READ_WRITE, FLASH_CMD_READ, 0, 1, 1, 0x00, 0, 0}, + {FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ_1_4_4, 0, 4, 4, 0x00, 2, 4}, + {FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ_1_1_4, 0, 1, 4, 0x00, 4, 0}, + {FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ_1_2_2, 0, 2, 2, 0x00, 4, 0}, + {FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ_1_1_2, 0, 1, 2, 0x00, 0, 8}, + {FLASH_FLAG_READ_FAST, SPINOR_OP_READ_FAST, 0, 1, 1, 0x00, 0, 8}, + {FLASH_FLAG_READ_WRITE, SPINOR_OP_READ, 0, 1, 1, 0x00, 0, 0}, {0x00, 0, 0, 0, 0, 0x00, 0, 0}, }; /* Default WRITE configurations */ static struct seq_rw_config default_write_configs[] = { - {FLASH_FLAG_WRITE_1_4_4, FLASH_CMD_WRITE_1_4_4, 1, 4, 4, 0x00, 0, 0}, - {FLASH_FLAG_WRITE_1_1_4, FLASH_CMD_WRITE_1_1_4, 1, 1, 4, 0x00, 0, 0}, - {FLASH_FLAG_WRITE_1_2_2, FLASH_CMD_WRITE_1_2_2, 1, 2, 2, 0x00, 0, 0}, - {FLASH_FLAG_WRITE_1_1_2, FLASH_CMD_WRITE_1_1_2, 1, 1, 2, 0x00, 0, 0}, - {FLASH_FLAG_READ_WRITE, FLASH_CMD_WRITE, 1, 1, 1, 0x00, 0, 0}, + {FLASH_FLAG_WRITE_1_4_4, SPINOR_OP_WRITE_1_4_4, 1, 4, 4, 0x00, 0, 0}, + {FLASH_FLAG_WRITE_1_1_4, SPINOR_OP_WRITE_1_1_4, 1, 1, 4, 0x00, 0, 0}, + {FLASH_FLAG_WRITE_1_2_2, SPINOR_OP_WRITE_1_2_2, 1, 2, 2, 0x00, 0, 0}, + {FLASH_FLAG_WRITE_1_1_2, SPINOR_OP_WRITE_1_1_2, 1, 1, 2, 0x00, 0, 0}, + {FLASH_FLAG_READ_WRITE, SPINOR_OP_WRITE, 1, 1, 1, 0x00, 0, 0}, {0x00, 0, 0, 0, 0, 0x00, 0, 0}, }; @@ -489,12 +489,12 @@ static struct seq_rw_config default_write_configs[] = { * cycles. */ static struct seq_rw_config n25q_read3_configs[] = { - {FLASH_FLAG_READ_1_4_4, FLASH_CMD_READ_1_4_4, 0, 4, 4, 0x00, 0, 8}, - {FLASH_FLAG_READ_1_1_4, FLASH_CMD_READ_1_1_4, 0, 1, 4, 0x00, 0, 8}, - {FLASH_FLAG_READ_1_2_2, FLASH_CMD_READ_1_2_2, 0, 2, 2, 0x00, 0, 8}, - {FLASH_FLAG_READ_1_1_2, FLASH_CMD_READ_1_1_2, 0, 1, 2, 0x00, 0, 8}, - {FLASH_FLAG_READ_FAST, FLASH_CMD_READ_FAST, 0, 1, 1, 0x00, 0, 8}, - {FLASH_FLAG_READ_WRITE, FLASH_CMD_READ, 0, 1, 1, 0x00, 0, 0}, + {FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ_1_4_4, 0, 4, 4, 0x00, 0, 8}, + {FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ_1_1_4, 0, 1, 4, 0x00, 0, 8}, + {FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ_1_2_2, 0, 2, 2, 0x00, 0, 8}, + {FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ_1_1_2, 0, 1, 2, 0x00, 0, 8}, + {FLASH_FLAG_READ_FAST, SPINOR_OP_READ_FAST, 0, 1, 1, 0x00, 0, 8}, + {FLASH_FLAG_READ_WRITE, SPINOR_OP_READ, 0, 1, 1, 0x00, 0, 0}, {0x00, 0, 0, 0, 0, 0x00, 0, 0}, }; @@ -504,12 +504,12 @@ static struct seq_rw_config n25q_read3_configs[] = { * - 'FAST' variants configured for 8 dummy cycles (see note above.) */ static struct seq_rw_config n25q_read4_configs[] = { - {FLASH_FLAG_READ_1_4_4, FLASH_CMD_READ4_1_4_4, 0, 4, 4, 0x00, 0, 8}, - {FLASH_FLAG_READ_1_1_4, FLASH_CMD_READ4_1_1_4, 0, 1, 4, 0x00, 0, 8}, - {FLASH_FLAG_READ_1_2_2, FLASH_CMD_READ4_1_2_2, 0, 2, 2, 0x00, 0, 8}, - {FLASH_FLAG_READ_1_1_2, FLASH_CMD_READ4_1_1_2, 0, 1, 2, 0x00, 0, 8}, - {FLASH_FLAG_READ_FAST, FLASH_CMD_READ4_FAST, 0, 1, 1, 0x00, 0, 8}, - {FLASH_FLAG_READ_WRITE, FLASH_CMD_READ4, 0, 1, 1, 0x00, 0, 0}, + {FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ4_1_4_4, 0, 4, 4, 0x00, 0, 8}, + {FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ4_1_1_4, 0, 1, 4, 0x00, 0, 8}, + {FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ4_1_2_2, 0, 2, 2, 0x00, 0, 8}, + {FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ4_1_1_2, 0, 1, 2, 0x00, 0, 8}, + {FLASH_FLAG_READ_FAST, SPINOR_OP_READ4_FAST, 0, 1, 1, 0x00, 0, 8}, + {FLASH_FLAG_READ_WRITE, SPINOR_OP_READ4, 0, 1, 1, 0x00, 0, 0}, {0x00, 0, 0, 0, 0, 0x00, 0, 0}, }; @@ -522,7 +522,7 @@ static int stfsm_mx25_en_32bit_addr_seq(struct stfsm_seq *seq) { seq->seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | - SEQ_OPC_OPCODE(FLASH_CMD_EN4B_ADDR) | + SEQ_OPC_OPCODE(SPINOR_OP_EN4B_ADDR) | SEQ_OPC_CSDEASSERT); seq->seq[0] = STFSM_INST_CMD1; @@ -550,12 +550,12 @@ static int stfsm_mx25_en_32bit_addr_seq(struct stfsm_seq *seq) * entering a state that is incompatible with the SPIBoot Controller. */ static struct seq_rw_config stfsm_s25fl_read4_configs[] = { - {FLASH_FLAG_READ_1_4_4, FLASH_CMD_READ4_1_4_4, 0, 4, 4, 0x00, 2, 4}, - {FLASH_FLAG_READ_1_1_4, FLASH_CMD_READ4_1_1_4, 0, 1, 4, 0x00, 0, 8}, - {FLASH_FLAG_READ_1_2_2, FLASH_CMD_READ4_1_2_2, 0, 2, 2, 0x00, 4, 0}, - {FLASH_FLAG_READ_1_1_2, FLASH_CMD_READ4_1_1_2, 0, 1, 2, 0x00, 0, 8}, - {FLASH_FLAG_READ_FAST, FLASH_CMD_READ4_FAST, 0, 1, 1, 0x00, 0, 8}, - {FLASH_FLAG_READ_WRITE, FLASH_CMD_READ4, 0, 1, 1, 0x00, 0, 0}, + {FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ4_1_4_4, 0, 4, 4, 0x00, 2, 4}, + {FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ4_1_1_4, 0, 1, 4, 0x00, 0, 8}, + {FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ4_1_2_2, 0, 2, 2, 0x00, 4, 0}, + {FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ4_1_1_2, 0, 1, 2, 0x00, 0, 8}, + {FLASH_FLAG_READ_FAST, SPINOR_OP_READ4_FAST, 0, 1, 1, 0x00, 0, 8}, + {FLASH_FLAG_READ_WRITE, SPINOR_OP_READ4, 0, 1, 1, 0x00, 0, 0}, {0x00, 0, 0, 0, 0, 0x00, 0, 0}, }; @@ -574,7 +574,7 @@ static struct stfsm_seq stfsm_seq_read_jedec = { .data_size = TRANSFER_SIZE(8), .seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | - SEQ_OPC_OPCODE(FLASH_CMD_RDID)), + SEQ_OPC_OPCODE(SPINOR_OP_RDID)), .seq = { STFSM_INST_CMD1, STFSM_INST_DATA_READ, @@ -590,7 +590,7 @@ static struct stfsm_seq stfsm_seq_read_status_fifo = { .data_size = TRANSFER_SIZE(4), .seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | - SEQ_OPC_OPCODE(FLASH_CMD_RDSR)), + SEQ_OPC_OPCODE(SPINOR_OP_RDSR)), .seq = { STFSM_INST_CMD1, STFSM_INST_DATA_READ, @@ -606,10 +606,10 @@ static struct stfsm_seq stfsm_seq_erase_sector = { /* 'addr_cfg' configured during initialisation */ .seq_opc = { (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | - SEQ_OPC_OPCODE(FLASH_CMD_WREN) | SEQ_OPC_CSDEASSERT), + SEQ_OPC_OPCODE(SPINOR_OP_WREN) | SEQ_OPC_CSDEASSERT), (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | - SEQ_OPC_OPCODE(FLASH_CMD_SE)), + SEQ_OPC_OPCODE(SPINOR_OP_SE)), }, .seq = { STFSM_INST_CMD1, @@ -627,10 +627,10 @@ static struct stfsm_seq stfsm_seq_erase_sector = { static struct stfsm_seq stfsm_seq_erase_chip = { .seq_opc = { (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | - SEQ_OPC_OPCODE(FLASH_CMD_WREN) | SEQ_OPC_CSDEASSERT), + SEQ_OPC_OPCODE(SPINOR_OP_WREN) | SEQ_OPC_CSDEASSERT), (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | - SEQ_OPC_OPCODE(FLASH_CMD_CHIPERASE) | SEQ_OPC_CSDEASSERT), + SEQ_OPC_OPCODE(SPINOR_OP_CHIPERASE) | SEQ_OPC_CSDEASSERT), }, .seq = { STFSM_INST_CMD1, @@ -647,9 +647,9 @@ static struct stfsm_seq stfsm_seq_erase_chip = { static struct stfsm_seq stfsm_seq_write_status = { .seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | - SEQ_OPC_OPCODE(FLASH_CMD_WREN) | SEQ_OPC_CSDEASSERT), + SEQ_OPC_OPCODE(SPINOR_OP_WREN) | SEQ_OPC_CSDEASSERT), .seq_opc[1] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | - SEQ_OPC_OPCODE(FLASH_CMD_WRSR)), + SEQ_OPC_OPCODE(SPINOR_OP_WRSR)), .seq = { STFSM_INST_CMD1, STFSM_INST_CMD2, @@ -665,9 +665,9 @@ static struct stfsm_seq stfsm_seq_write_status = { static int stfsm_n25q_en_32bit_addr_seq(struct stfsm_seq *seq) { seq->seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | - SEQ_OPC_OPCODE(FLASH_CMD_EN4B_ADDR)); + SEQ_OPC_OPCODE(SPINOR_OP_EN4B_ADDR)); seq->seq_opc[1] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | - SEQ_OPC_OPCODE(FLASH_CMD_WREN) | + SEQ_OPC_OPCODE(SPINOR_OP_WREN) | SEQ_OPC_CSDEASSERT); seq->seq[0] = STFSM_INST_CMD2; @@ -788,7 +788,7 @@ static int stfsm_write_fifo(struct stfsm *fsm, const uint32_t *buf, static int stfsm_enter_32bit_addr(struct stfsm *fsm, int enter) { struct stfsm_seq *seq = &fsm->stfsm_seq_en_32bit_addr; - uint32_t cmd = enter ? FLASH_CMD_EN4B_ADDR : FLASH_CMD_EX4B_ADDR; + uint32_t cmd = enter ? SPINOR_OP_EN4B_ADDR : SPINOR_OP_EX4B_ADDR; seq->seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | @@ -812,7 +812,7 @@ static uint8_t stfsm_wait_busy(struct stfsm *fsm) /* Use RDRS1 */ seq->seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | - SEQ_OPC_OPCODE(FLASH_CMD_RDSR)); + SEQ_OPC_OPCODE(SPINOR_OP_RDSR)); /* Load read_status sequence */ stfsm_load_seq(fsm, seq); @@ -985,7 +985,7 @@ static void stfsm_prepare_rw_seq(struct stfsm *fsm, if (cfg->write) seq->seq_opc[i++] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | - SEQ_OPC_OPCODE(FLASH_CMD_WREN) | + SEQ_OPC_OPCODE(SPINOR_OP_WREN) | SEQ_OPC_CSDEASSERT); /* Address configuration (24 or 32-bit addresses) */ @@ -1121,21 +1121,21 @@ static int stfsm_mx25_config(struct stfsm *fsm) } /* Check status of 'QE' bit, update if required. */ - stfsm_read_status(fsm, FLASH_CMD_RDSR, &sta, 1); + stfsm_read_status(fsm, SPINOR_OP_RDSR, &sta, 1); data_pads = ((fsm->stfsm_seq_read.seq_cfg >> 16) & 0x3) + 1; if (data_pads == 4) { if (!(sta & MX25_STATUS_QE)) { /* Set 'QE' */ sta |= MX25_STATUS_QE; - stfsm_write_status(fsm, FLASH_CMD_WRSR, sta, 1, 1); + stfsm_write_status(fsm, SPINOR_OP_WRSR, sta, 1, 1); } } else { if (sta & MX25_STATUS_QE) { /* Clear 'QE' */ sta &= ~MX25_STATUS_QE; - stfsm_write_status(fsm, FLASH_CMD_WRSR, sta, 1, 1); + stfsm_write_status(fsm, SPINOR_OP_WRSR, sta, 1, 1); } } @@ -1260,7 +1260,7 @@ static void stfsm_s25fl_write_dyb(struct stfsm *fsm, uint32_t offs, uint8_t dby) { struct stfsm_seq seq = { .seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | - SEQ_OPC_OPCODE(FLASH_CMD_WREN) | + SEQ_OPC_OPCODE(SPINOR_OP_WREN) | SEQ_OPC_CSDEASSERT), .seq_opc[1] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | SEQ_OPC_OPCODE(S25FL_CMD_DYBWR)), @@ -1300,7 +1300,7 @@ static int stfsm_s25fl_clear_status_reg(struct stfsm *fsm) SEQ_OPC_CSDEASSERT), .seq_opc[1] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | - SEQ_OPC_OPCODE(FLASH_CMD_WRDI) | + SEQ_OPC_OPCODE(SPINOR_OP_WRDI) | SEQ_OPC_CSDEASSERT), .seq = { STFSM_INST_CMD1, @@ -1379,7 +1379,7 @@ static int stfsm_s25fl_config(struct stfsm *fsm) } /* Check status of 'QE' bit, update if required. */ - stfsm_read_status(fsm, FLASH_CMD_RDSR2, &cr1, 1); + stfsm_read_status(fsm, SPINOR_OP_RDSR2, &cr1, 1); data_pads = ((fsm->stfsm_seq_read.seq_cfg >> 16) & 0x3) + 1; if (data_pads == 4) { if (!(cr1 & STFSM_S25FL_CONFIG_QE)) { @@ -1397,9 +1397,9 @@ static int stfsm_s25fl_config(struct stfsm *fsm) } } if (update_sr) { - stfsm_read_status(fsm, FLASH_CMD_RDSR, &sr1, 1); + stfsm_read_status(fsm, SPINOR_OP_RDSR, &sr1, 1); sta_wr = ((uint16_t)cr1 << 8) | sr1; - stfsm_write_status(fsm, FLASH_CMD_WRSR, sta_wr, 2, 1); + stfsm_write_status(fsm, SPINOR_OP_WRSR, sta_wr, 2, 1); } /* @@ -1424,7 +1424,7 @@ static int stfsm_w25q_config(struct stfsm *fsm) return ret; /* Check status of 'QE' bit, update if required. */ - stfsm_read_status(fsm, FLASH_CMD_RDSR2, &sr2, 1); + stfsm_read_status(fsm, SPINOR_OP_RDSR2, &sr2, 1); data_pads = ((fsm->stfsm_seq_read.seq_cfg >> 16) & 0x3) + 1; if (data_pads == 4) { if (!(sr2 & W25Q_STATUS_QE)) { @@ -1441,9 +1441,9 @@ static int stfsm_w25q_config(struct stfsm *fsm) } if (update_sr) { /* Write status register */ - stfsm_read_status(fsm, FLASH_CMD_RDSR, &sr1, 1); + stfsm_read_status(fsm, SPINOR_OP_RDSR, &sr1, 1); sr_wr = ((uint16_t)sr2 << 8) | sr1; - stfsm_write_status(fsm, FLASH_CMD_WRSR, sr_wr, 2, 1); + stfsm_write_status(fsm, SPINOR_OP_WRSR, sr_wr, 2, 1); } return 0;