From: Mathias Kresin Date: Sun, 26 Mar 2017 08:53:35 +0000 (+0200) Subject: lantiq: fix avm fritz box mac addresses X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=92a12c434ca340f619a5bcd327aff8bdaf4ee0c7;p=openwrt%2Fstaging%2Fldir.git lantiq: fix avm fritz box mac addresses It has been shown that the Fritz boxes have the correct mac address set in the wireless calibration data/eeeprom. Use this mac address as base for the ethernet and xdsl interface increment/decrement the address to match the values stored in the tffs. Signed-off-by: Mathias Kresin --- diff --git a/target/linux/lantiq/base-files/etc/board.d/02_network b/target/linux/lantiq/base-files/etc/board.d/02_network index 2f744f859a..f63be9e3fd 100755 --- a/target/linux/lantiq/base-files/etc/board.d/02_network +++ b/target/linux/lantiq/base-files/etc/board.d/02_network @@ -100,7 +100,16 @@ EASY80920NAND|EASY80920NOR) "0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0" ;; +FRITZ3370) + wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2439)" 1) + ;; + +FRITZ7320) + wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2705)" 1) + ;; + FRITZ7360SL) + wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2705)" 1) ucidef_add_switch "switch0" \ "0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0" ;; diff --git a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom index 6b9d23a799..7144423d43 100644 --- a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom +++ b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom @@ -138,13 +138,8 @@ case "$FIRMWARE" in ath9k_eeprom_extract "calibration" 61440 0 ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_ascii uboot-env ethaddr) +2) 524 ;; - FRITZ3370) + FRITZ3370|FRITZ7320|FRITZ7360SL) ath9k_eeprom_extract "urlader" 2437 0 - ath9k_patch_fw_mac "00:00:00:00:00:00" 2 - ;; - FRITZ7320|FRITZ7360SL) - ath9k_eeprom_extract "urlader" 2437 0 - ath9k_patch_fw_mac_crc "00:00:00:00:00:00" 268 ;; TDW8970|TDW8980) ath9k_eeprom_extract "boardconfig" 135168 0 diff --git a/target/linux/lantiq/dts/FRITZ3370.dts b/target/linux/lantiq/dts/FRITZ3370.dts index 1e2e90ca1b..3f57f45ee8 100644 --- a/target/linux/lantiq/dts/FRITZ3370.dts +++ b/target/linux/lantiq/dts/FRITZ3370.dts @@ -189,7 +189,7 @@ reg = <4 0>; spi-max-frequency = <1000000>; - partition@0 { + urlader: partition@0 { reg = <0x0 0x20000>; label = "urlader"; read-only; @@ -215,7 +215,8 @@ #address-cells = <1>; #size-cells = <0>; reg = <0>; - mac-address = [ 00 11 22 33 44 55 ]; + mtd-mac-address = <&urlader 0x987>; + mtd-mac-address-increment = <(-2)>; lantiq,switch; ethernet@0 { diff --git a/target/linux/lantiq/dts/FRITZ7320.dts b/target/linux/lantiq/dts/FRITZ7320.dts index 1d3e02f9aa..491baee7ea 100644 --- a/target/linux/lantiq/dts/FRITZ7320.dts +++ b/target/linux/lantiq/dts/FRITZ7320.dts @@ -90,6 +90,8 @@ etop@E180000 { phy-mode = "mii"; + mtd-mac-address = <&ath9k_cal 0xa91>; + mtd-mac-address-increment = <(-2)>; }; ifxhcd@E101000 { diff --git a/target/linux/lantiq/dts/FRITZ7360SL.dts b/target/linux/lantiq/dts/FRITZ7360SL.dts index b4b12246ce..31a9527b79 100644 --- a/target/linux/lantiq/dts/FRITZ7360SL.dts +++ b/target/linux/lantiq/dts/FRITZ7360SL.dts @@ -155,7 +155,8 @@ #address-cells = <1>; #size-cells = <0>; reg = <0>; - mac-address = [ 00 11 22 33 44 55 ]; + mtd-mac-address = <&urlader 0xa91>; + mtd-mac-address-increment = <(-2)>; lantiq,switch; ethernet@0 {