From: Wojciech Dubowik Date: Tue, 19 Jul 2022 11:35:12 +0000 (+0200) Subject: layerscape: Add ls1028ardb support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=924a5aabc708d2ab84ae9c05a580db75b188534f;p=openwrt%2Fstaging%2Fblogic.git layerscape: Add ls1028ardb support Add support for NXP LS1028ARDB reference board. It's a dual core Coretex-A53 board with 4G RAM and 5 Eternet ports (4 ports are connected to MSCC Felix switch). The original layout of NXP board has been kept but firmware images are adapted to be more sysupgrade friendly. At the moment NOR and SD boots are supported. NOR flash instructions: * make sd card with sdboot image * boot * write firmware image to spi flash $ mtd write /tmp/openwrt-layerscape-armv8_64b-fsl_ls1028a-rdb- squashfs-firmware.bin /dev/mtd0 * change jumper to NOR boot and reset V3: * Added board specific network defaults for lan/wan v2: * Added INA220 curent monitor, PCF2129 RTC clock and NXP SA56004ED temperature sensor to default packages * removed compat fixups for thist board Signed-off-by: Wojciech Dubowik --- diff --git a/target/linux/layerscape/README b/target/linux/layerscape/README index a8d184646870..1e3f707b4f18 100644 --- a/target/linux/layerscape/README +++ b/target/linux/layerscape/README @@ -12,6 +12,7 @@ users can bring up the board without difficulty. LS1012ARDB (QSPI NOR boot) LS1012AFRDM (QSPI NOR boot) LS1012AFRWY (QSPI NOR boot) + LS1028ARDB (QSPI NOR boot | SD card boot) LS1043ARDB (NOR boot | SD card boot) LS1046ARDB (QSPI NOR boot | SD card boot) LS1046AFRWY (QSPI NOR boot | SD card boot) @@ -95,6 +96,15 @@ from SD card. (sdcard.img images are gz-iped to save space. Please extract them => sf write a0000000 0 $filesize => reset +* LS1028ARDB + Board has only one bank. Those commands will replace stock bootloader + and firmware. + => tftp a0000000 -firmware.bin + => sf probe 0:0 + => sf erase 0 +$filesize + => sf write a0000000 0 $filesize + => reset + * LS1043ARDB Start up from bank0, and program firmware to bank4 with below commands. Switch to bank4 to start up OpenWrt. diff --git a/target/linux/layerscape/base-files/etc/board.d/02_network b/target/linux/layerscape/base-files/etc/board.d/02_network index b46f0b06215c..172172c12c67 100644 --- a/target/linux/layerscape/base-files/etc/board.d/02_network +++ b/target/linux/layerscape/base-files/etc/board.d/02_network @@ -5,6 +5,10 @@ board_config_update case "$(board_name)" in + fsl,ls1028a-rdb|\ + fsl,ls1028a-rdb-sdboot) + ucidef_set_interfaces_lan_wan "swp0 swp1 swp2 swp3" "eth0" + ;; traverse,ls1043v) ucidef_set_interface_lan "eth0 eth1 eth2 eth3" ucidef_set_interface_wan "eth4" diff --git a/target/linux/layerscape/base-files/lib/preinit/79_move_config b/target/linux/layerscape/base-files/lib/preinit/79_move_config index 901a289b66f6..5519e059d9d7 100644 --- a/target/linux/layerscape/base-files/lib/preinit/79_move_config +++ b/target/linux/layerscape/base-files/lib/preinit/79_move_config @@ -10,6 +10,7 @@ move_config() { fsl,ls1012a-frwy-sdboot | \ fsl,ls1021a-iot-sdboot | \ fsl,ls1021a-twr-sdboot | \ + fsl,ls1028a-rdb-sdboot | \ fsl,ls1043a-rdb-sdboot | \ fsl,ls1046a-frwy-sdboot | \ fsl,ls1046a-rdb-sdboot | \ diff --git a/target/linux/layerscape/base-files/lib/upgrade/platform.sh b/target/linux/layerscape/base-files/lib/upgrade/platform.sh index 857be5a744b3..e88dfdf145c9 100644 --- a/target/linux/layerscape/base-files/lib/upgrade/platform.sh +++ b/target/linux/layerscape/base-files/lib/upgrade/platform.sh @@ -71,6 +71,7 @@ platform_copy_config() { fsl,ls1012a-frwy-sdboot | \ fsl,ls1021a-iot-sdboot | \ fsl,ls1021a-twr-sdboot | \ + fsl,ls1028a-rdb-sdboot | \ fsl,ls1043a-rdb-sdboot | \ fsl,ls1046a-frwy-sdboot | \ fsl,ls1046a-rdb-sdboot | \ @@ -95,6 +96,8 @@ platform_check_image() { fsl,ls1021a-iot-sdboot | \ fsl,ls1021a-twr | \ fsl,ls1021a-twr-sdboot | \ + fsl,ls1028a-rdb | \ + fsl,ls1028a-rdb-sdboot | \ fsl,ls1043a-rdb | \ fsl,ls1043a-rdb-sdboot | \ fsl,ls1046a-frwy | \ @@ -130,6 +133,7 @@ platform_do_upgrade() { fsl,ls1012a-frdm | \ fsl,ls1012a-rdb | \ fsl,ls1021a-twr | \ + fsl,ls1028a-rdb | \ fsl,ls1043a-rdb | \ fsl,ls1046a-frwy | \ fsl,ls1046a-rdb | \ @@ -142,6 +146,7 @@ platform_do_upgrade() { fsl,ls1012a-frwy-sdboot | \ fsl,ls1021a-iot-sdboot | \ fsl,ls1021a-twr-sdboot | \ + fsl,ls1028a-rdb-sdboot | \ fsl,ls1043a-rdb-sdboot | \ fsl,ls1046a-frwy-sdboot | \ fsl,ls1046a-rdb-sdboot | \ diff --git a/target/linux/layerscape/image/armv8_64b.mk b/target/linux/layerscape/image/armv8_64b.mk index 4a69f1c19e1c..f5a6a055fb20 100644 --- a/target/linux/layerscape/image/armv8_64b.mk +++ b/target/linux/layerscape/image/armv8_64b.mk @@ -98,6 +98,53 @@ define Device/fsl_ls1012a-frwy-sdboot endef TARGET_DEVICES += fsl_ls1012a-frwy-sdboot +define Device/fsl_ls1028a-rdb + DEVICE_VENDOR := NXP + DEVICE_MODEL := LS1028A-RDB + DEVICE_VARIANT := Default + DEVICE_DTS := freescale/fsl-ls1028a-rdb + KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb + DEVICE_PACKAGES += \ + trusted-firmware-a-ls1028a-rdb \ + kmod-hwmon-ina2xx \ + kmod-hwmon-lm90 \ + kmod-rtc-pcf2127 + IMAGE/firmware.bin := \ + ls-clean | \ + ls-append $(1)-bl2.pbl | pad-to 1M | \ + ls-append $(1)-fip.bin | pad-to 5M | \ + ls-append $(1)-uboot-env.bin | pad-to 16M | \ + append-kernel | \ + append-rootfs | pad-rootfs | check-size + IMAGE/sysupgrade.bin := \ + append-kernel | \ + append-rootfs | pad-rootfs | \ + check-size $(LS_SYSUPGRADE_IMAGE_SIZE) | append-metadata +endef +TARGET_DEVICES += fsl_ls1028a-rdb + +define Device/fsl_ls1028a-rdb-sdboot + $(Device/fsl-sdboot) + DEVICE_VENDOR := NXP + DEVICE_MODEL := LS1028A-RDB + DEVICE_VARIANT := SD Card Boot + DEVICE_DTS := freescale/fsl-ls1028a-rdb + DEVICE_PACKAGES += \ + trusted-firmware-a-ls1028a-rdb-sdboot \ + kmod-hwmon-ina2xx \ + kmod-hwmon-lm90 \ + kmod-rtc-pcf2127 + IMAGE/sdcard.img.gz := \ + ls-clean | \ + ls-append-sdhead $(1) | pad-to 4K | \ + ls-append $(1)-bl2.pbl | pad-to 1M | \ + ls-append $(1)-fip.bin | pad-to 5M | \ + ls-append $(1)-uboot-env.bin | pad-to 16M | \ + ls-append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \ + append-rootfs | pad-to $(LS_SD_IMAGE_SIZE)M | gzip +endef +TARGET_DEVICES += fsl_ls1028a-rdb-sdboot + define Device/fsl_ls1043a-rdb $(Device/fix-sysupgrade) DEVICE_VENDOR := NXP