From: Maciej Purski Date: Fri, 5 Oct 2018 15:36:29 +0000 (+0300) Subject: regulator: core: Change voltage setting path X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=9243a195be7af96a9b69990e9313c4ba1c5fbeca;p=openwrt%2Fstaging%2Fblogic.git regulator: core: Change voltage setting path On Odroid XU3/4 and other Exynos5422 based boards there is a case, that different devices on the board are supplied by different regulators with non-fixed voltages. If one of these devices temporarily requires higher voltage, there might occur a situation that the spread between two devices' voltages is so high, that there is a risk of changing 'high' and 'low' states on the interconnection between devices powered by those regulators. Uncoupled regulators should be a special case of coupled regulators, so they should share a common voltage setting path. When enabling, disabling or setting voltage of a coupled regulator, all coupled regulators should be locked. Regulator's supplies should be locked, when setting voltage of a single regulator. Enabling a coupled regulator or setting its voltage should not be possible if some of its coupled regulators, has not been registered. Add function for locking coupled regulators and supplies. Extract a new function regulator_set_voltage_rdev() from regulator_set_voltage_unlocked(), which is called when setting voltage of a single regulator. Signed-off-by: Maciej Purski Signed-off-by: Dmitry Osipenko Signed-off-by: Mark Brown --- diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index a2a513780fd7..5105eaaf3cef 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -107,6 +107,9 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV); static int regulator_balance_voltage(struct regulator_dev *rdev, suspend_state_t state); +static int regulator_set_voltage_rdev(struct regulator_dev *rdev, + int min_uV, int max_uV, + suspend_state_t state); static struct regulator *create_regulator(struct regulator_dev *rdev, struct device *dev, const char *supply_name); @@ -198,37 +201,66 @@ static void regulator_unlock(struct regulator_dev *rdev) } } -/** - * regulator_lock_supply - lock a regulator and its supplies - * @rdev: regulator source - */ -static void regulator_lock_supply(struct regulator_dev *rdev) +static int regulator_lock_recursive(struct regulator_dev *rdev, + unsigned int subclass) { + struct regulator_dev *c_rdev; int i; - for (i = 0; rdev; rdev = rdev_get_supply(rdev), i++) - regulator_lock_nested(rdev, i); + for (i = 0; i < rdev->coupling_desc.n_coupled; i++) { + c_rdev = rdev->coupling_desc.coupled_rdevs[i]; + + if (!c_rdev) + continue; + + regulator_lock_nested(c_rdev, subclass++); + + if (c_rdev->supply) + subclass = + regulator_lock_recursive(c_rdev->supply->rdev, + subclass); + } + + return subclass; } /** - * regulator_unlock_supply - unlock a regulator and its supplies - * @rdev: regulator source + * regulator_unlock_dependent - unlock regulator's suppliers and coupled + * regulators + * @rdev: regulator source + * + * Unlock all regulators related with rdev by coupling or suppling. */ -static void regulator_unlock_supply(struct regulator_dev *rdev) +static void regulator_unlock_dependent(struct regulator_dev *rdev) { - struct regulator *supply; + struct regulator_dev *c_rdev; + int i; - while (1) { - regulator_unlock(rdev); - supply = rdev->supply; + for (i = 0; i < rdev->coupling_desc.n_coupled; i++) { + c_rdev = rdev->coupling_desc.coupled_rdevs[i]; - if (!rdev->supply) - return; + if (!c_rdev) + continue; - rdev = supply->rdev; + regulator_unlock(c_rdev); + + if (c_rdev->supply) + regulator_unlock_dependent(c_rdev->supply->rdev); } } +/** + * regulator_lock_dependent - lock regulator's suppliers and coupled regulators + * @rdev: regulator source + * + * This function as a wrapper on regulator_lock_recursive(), which locks + * all regulators related with rdev by coupling or suppling. + */ +static inline void regulator_lock_dependent(struct regulator_dev *rdev) +{ + regulator_lock_recursive(rdev, 0); +} + /** * of_get_regulator - get a regulator device node based on supply name * @dev: Device pointer for the consumer (of regulator) device @@ -2289,9 +2321,16 @@ int regulator_enable(struct regulator *regulator) return ret; } - mutex_lock(&rdev->mutex); + regulator_lock_dependent(rdev); + /* balance only if there are regulators coupled */ + if (rdev->coupling_desc.n_coupled > 1) { + ret = regulator_balance_voltage(rdev, PM_SUSPEND_ON); + if (ret != 0) + goto unlock; + } ret = _regulator_enable(rdev); - mutex_unlock(&rdev->mutex); +unlock: + regulator_unlock_dependent(rdev); if (ret != 0 && rdev->supply) regulator_disable(rdev->supply); @@ -2397,9 +2436,11 @@ int regulator_disable(struct regulator *regulator) if (regulator->always_on) return 0; - mutex_lock(&rdev->mutex); + regulator_lock_dependent(rdev); ret = _regulator_disable(rdev); - mutex_unlock(&rdev->mutex); + if (rdev->coupling_desc.n_coupled > 1) + regulator_balance_voltage(rdev, PM_SUSPEND_ON); + regulator_unlock_dependent(rdev); if (ret == 0 && rdev->supply) regulator_disable(rdev->supply); @@ -2448,10 +2489,12 @@ int regulator_force_disable(struct regulator *regulator) struct regulator_dev *rdev = regulator->rdev; int ret; - mutex_lock(&rdev->mutex); + regulator_lock_dependent(rdev); regulator->uA_load = 0; ret = _regulator_force_disable(regulator->rdev); - mutex_unlock(&rdev->mutex); + if (rdev->coupling_desc.n_coupled > 1) + regulator_balance_voltage(rdev, PM_SUSPEND_ON); + regulator_unlock_dependent(rdev); if (rdev->supply) while (rdev->open_count--) @@ -2599,9 +2642,9 @@ int regulator_is_enabled(struct regulator *regulator) if (regulator->always_on) return 1; - mutex_lock(®ulator->rdev->mutex); + regulator_lock_dependent(regulator->rdev); ret = _regulator_is_enabled(regulator->rdev); - mutex_unlock(®ulator->rdev->mutex); + regulator_unlock_dependent(regulator->rdev); return ret; } @@ -3015,8 +3058,6 @@ static int regulator_set_voltage_unlocked(struct regulator *regulator, int ret = 0; int old_min_uV, old_max_uV; int current_uV; - int best_supply_uV = 0; - int supply_change_uV = 0; /* If we're setting the same range as last time the change * should be a noop (some cpufreq implementations use the same @@ -3056,10 +3097,27 @@ static int regulator_set_voltage_unlocked(struct regulator *regulator, voltage->min_uV = min_uV; voltage->max_uV = max_uV; - ret = regulator_check_consumers(rdev, &min_uV, &max_uV, state); + /* for not coupled regulators this will just set the voltage */ + ret = regulator_balance_voltage(rdev, state); if (ret < 0) goto out2; +out: + return 0; +out2: + voltage->min_uV = old_min_uV; + voltage->max_uV = old_max_uV; + + return ret; +} + +static int regulator_set_voltage_rdev(struct regulator_dev *rdev, int min_uV, + int max_uV, suspend_state_t state) +{ + int best_supply_uV = 0; + int supply_change_uV = 0; + int ret; + if (rdev->supply && regulator_ops_is_valid(rdev->supply->rdev, REGULATOR_CHANGE_VOLTAGE) && @@ -3071,13 +3129,13 @@ static int regulator_set_voltage_unlocked(struct regulator *regulator, selector = regulator_map_voltage(rdev, min_uV, max_uV); if (selector < 0) { ret = selector; - goto out2; + goto out; } best_supply_uV = _regulator_list_voltage(rdev, selector, 0); if (best_supply_uV < 0) { ret = best_supply_uV; - goto out2; + goto out; } best_supply_uV += rdev->desc->min_dropout_uV; @@ -3085,7 +3143,7 @@ static int regulator_set_voltage_unlocked(struct regulator *regulator, current_supply_uV = _regulator_get_voltage(rdev->supply->rdev); if (current_supply_uV < 0) { ret = current_supply_uV; - goto out2; + goto out; } supply_change_uV = best_supply_uV - current_supply_uV; @@ -3097,7 +3155,7 @@ static int regulator_set_voltage_unlocked(struct regulator *regulator, if (ret) { dev_err(&rdev->dev, "Failed to increase supply voltage: %d\n", ret); - goto out2; + goto out; } } @@ -3107,7 +3165,7 @@ static int regulator_set_voltage_unlocked(struct regulator *regulator, ret = _regulator_do_set_suspend_voltage(rdev, min_uV, max_uV, state); if (ret < 0) - goto out2; + goto out; if (supply_change_uV < 0) { ret = regulator_set_voltage_unlocked(rdev->supply, @@ -3120,11 +3178,6 @@ static int regulator_set_voltage_unlocked(struct regulator *regulator, } out: - return ret; -out2: - voltage->min_uV = old_min_uV; - voltage->max_uV = old_max_uV; - return ret; } @@ -3340,10 +3393,10 @@ static int regulator_balance_voltage(struct regulator_dev *rdev, ret = 0; goto out; } -#if 0 + ret = regulator_set_voltage_rdev(best_rdev, best_min_uV, best_max_uV, state); -#endif + if (ret < 0) goto out; @@ -3377,12 +3430,12 @@ int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV) { int ret = 0; - regulator_lock_supply(regulator->rdev); + regulator_lock_dependent(regulator->rdev); ret = regulator_set_voltage_unlocked(regulator, min_uV, max_uV, PM_SUSPEND_ON); - regulator_unlock_supply(regulator->rdev); + regulator_unlock_dependent(regulator->rdev); return ret; } @@ -3460,12 +3513,12 @@ int regulator_set_suspend_voltage(struct regulator *regulator, int min_uV, if (regulator_check_states(state) || state == PM_SUSPEND_ON) return -EINVAL; - regulator_lock_supply(regulator->rdev); + regulator_lock_dependent(regulator->rdev); ret = _regulator_set_suspend_voltage(regulator, min_uV, max_uV, state); - regulator_unlock_supply(regulator->rdev); + regulator_unlock_dependent(regulator->rdev); return ret; } @@ -3657,11 +3710,11 @@ int regulator_get_voltage(struct regulator *regulator) { int ret; - regulator_lock_supply(regulator->rdev); + regulator_lock_dependent(regulator->rdev); ret = _regulator_get_voltage(regulator->rdev); - regulator_unlock_supply(regulator->rdev); + regulator_unlock_dependent(regulator->rdev); return ret; }