From: Robert Marko Date: Sat, 23 Mar 2024 19:03:34 +0000 (+0100) Subject: mediatek: filogic: add support for Edgecore EAP111 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=923d7c553137d4a80aba230c2bd4744ddeb08359;p=openwrt%2Fstaging%2Fxback.git mediatek: filogic: add support for Edgecore EAP111 HW specifications: * Mediatek MT7981A * 256MB SPI-NAND * 512MB DRAM * Uplink: 1 x 10/100/1000Base-T Ethernet, Auto MDIX, RJ-45 with 802.3at PoE (Built-in GBe PHY) * LAN: 1 x 10/100/1000Base-T Ethernet, Auto MDIX, RJ-45 (Airoha EN8801SC) * 1 Tricolor LED * Reset button * 12V/2.0A DC input Installation: Board comes with OpenWifi/TIP which is OpenWrt based, so sysupgrade can be used directly over SSH. Signed-off-by: Robert Marko --- diff --git a/package/boot/uboot-envtools/files/mediatek_filogic b/package/boot/uboot-envtools/files/mediatek_filogic index 753c8ca064..02f43ebc7f 100644 --- a/package/boot/uboot-envtools/files/mediatek_filogic +++ b/package/boot/uboot-envtools/files/mediatek_filogic @@ -68,6 +68,7 @@ comfast,cf-e393ax) ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x80000" ;; cetron,ct3003|\ +edgecore,eap111|\ netgear,wax220|\ zbtlink,zbt-z8102ax|\ zbtlink,zbt-z8103ax) diff --git a/target/linux/mediatek/dts/mt7981a-edgecore-eap111.dts b/target/linux/mediatek/dts/mt7981a-edgecore-eap111.dts new file mode 100644 index 0000000000..c306a5eb7b --- /dev/null +++ b/target/linux/mediatek/dts/mt7981a-edgecore-eap111.dts @@ -0,0 +1,201 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +/dts-v1/; + +#include +#include "mt7981.dtsi" + +/ { + model = "Edgecore EAP111"; + compatible = "edgecore,eap111", "mediatek,mt7981"; + + aliases { + serial0 = &uart0; + led-boot = &led_green; + led-failsafe = &led_green; + led-running = &led_green; + led-upgrade = &led_green; + }; + + chosen { + bootargs-override = "console=ttyS0,115200n8"; + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + linux,code = ; + gpios = <&pio 1 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_green: led-green { + gpios = <&pio 9 GPIO_ACTIVE_HIGH>; + color = ; + function = LED_FUNCTION_INDICATOR; + }; + + led_orange: led-orange { + gpios = <&pio 34 GPIO_ACTIVE_HIGH>; + color = ; + function = LED_FUNCTION_INDICATOR; + }; + + led_blue: led-blue { + gpios = <&pio 35 GPIO_ACTIVE_HIGH>; + color = ; + function = LED_FUNCTION_INDICATOR; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +&pio { + spi0_flash_pins: spi0-pins { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_flash_pins>; + cs-gpios = <0>, <0>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-nand"; + reg = <0>; + spi-max-frequency = <52000000>; + + spi-cal-enable; + spi-cal-mode = "read-data"; + spi-cal-datalen = <7>; + spi-cal-data = /bits/ 8 <0x53 0x50 0x49 0x4E 0x41 0x4E 0x44>; + spi-cal-addrlen = <5>; + spi-cal-addr = /bits/ 32 <0x0 0x0 0x0 0x0 0x0>; + + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + mediatek,nmbm; + mediatek,bmt-max-ratio = <1>; + mediatek,bmt-max-reserved-blocks = <64>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "BL2"; + reg = <0x00000 0x100000>; + read-only; + }; + + partition@100000 { + label = "u-boot-env"; + reg = <0x100000 0x80000>; + }; + + partition@180000 { + label = "Factory"; + reg = <0x180000 0x200000>; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom_factory: eeprom@0 { + reg = <0x0 0x1000>; + }; + + macaddr_wan: macaddr@2a { + reg = <0x2a 0x6>; + }; + + macaddr_lan: macaddr@24 { + reg = <0x24 0x6>; + }; + }; + }; + + partition@380000 { + label = "FIP"; + reg = <0x380000 0x200000>; + read-only; + }; + + partition@580000 { + label = "ubi"; + reg = <0x580000 0x4000000>; + compatible = "linux,ubi"; + }; + }; + }; +}; + +&mdio_bus { + reset-gpios = <&pio 39 GPIO_ACTIVE_LOW>; + reset-delay-us = <10000>; + reset-post-delay-us = <10000>; + + en8801sc: ethernet-phy@24 { + reg = <24>; + compatible = "ethernet-phy-id03a2.9471"; + phy-mode = "sgmii"; + }; +}; + +ð { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + status = "okay"; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "sgmii"; + phy-handle = <&en8801sc>; + managed = "in-band-status"; + nvmem-cells = <&macaddr_lan>; + nvmem-cell-names = "mac-address"; + }; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-mode = "gmii"; + phy-handle = <&int_gbe_phy>; + nvmem-cells = <&macaddr_wan>; + nvmem-cell-names = "mac-address"; + }; +}; + +&wifi { + nvmem-cells = <&eeprom_factory>; + nvmem-cell-names = "eeprom"; + status = "okay"; +}; diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network index 8b6504fa1c..51e02efb39 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network @@ -37,7 +37,8 @@ mediatek_setup_interfaces() bananapi,bpi-r3) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 sfp2" "eth1 wan" ;; - bananapi,bpi-r3-mini) + bananapi,bpi-r3-mini|\ + edgecore,eap111) ucidef_set_interfaces_lan_wan eth0 eth1 ;; bananapi,bpi-r4) diff --git a/target/linux/mediatek/filogic/config-6.1 b/target/linux/mediatek/filogic/config-6.1 index ce6a2f8ddf..663bb054a2 100644 --- a/target/linux/mediatek/filogic/config-6.1 +++ b/target/linux/mediatek/filogic/config-6.1 @@ -1,6 +1,6 @@ CONFIG_64BIT=y # CONFIG_AHCI_MTK is not set -# CONFIG_AIROHA_EN8801SC_PHY is not set +CONFIG_AIROHA_EN8801SC_PHY=y CONFIG_ARCH_BINFMT_ELF_EXTRA_PHDRS=y CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y CONFIG_ARCH_DMA_ADDR_T_64BIT=y diff --git a/target/linux/mediatek/filogic/config-6.6 b/target/linux/mediatek/filogic/config-6.6 index a87fdc9bc8..110f6e7550 100644 --- a/target/linux/mediatek/filogic/config-6.6 +++ b/target/linux/mediatek/filogic/config-6.6 @@ -1,6 +1,6 @@ CONFIG_64BIT=y # CONFIG_AHCI_MTK is not set -# CONFIG_AIROHA_EN8801SC_PHY is not set +CONFIG_AIROHA_EN8801SC_PHY=y CONFIG_ARCH_BINFMT_ELF_EXTRA_PHDRS=y CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y CONFIG_ARCH_DEFAULT_KEXEC_IMAGE_VERIFY_SIG=y diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index 818a7cef95..f99a73ac74 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -506,6 +506,24 @@ define Device/dlink_aquila-pro-ai-m30-a1 endef TARGET_DEVICES += dlink_aquila-pro-ai-m30-a1 +define Device/edgecore_eap111 + DEVICE_VENDOR := Edgecore + DEVICE_MODEL := EAP111 + DEVICE_DTS := mt7981a-edgecore-eap111 + DEVICE_DTS_DIR := ../dts + DEVICE_DTS_LOADADDR := 0x47000000 + BLOCKSIZE := 128k + PAGESIZE := 2048 + UBINIZE_OPTS := -E 5 + KERNEL_IN_UBI := 1 + IMAGE_SIZE := 65536k + IMAGES := sysupgrade.bin factory.bin + IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE) + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata + DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware +endef +TARGET_DEVICES += edgecore_eap111 + define Device/glinet_gl-mt2500 DEVICE_VENDOR := GL.iNet DEVICE_MODEL := GL-MT2500