From: Arun Parameswaran Date: Tue, 6 Oct 2015 19:25:50 +0000 (-0700) Subject: net: phy: bcm7xxx: Modified to use global core register defines X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=9200c27a1cc7ac719e4c43411e5a170144ba0ac5;p=openwrt%2Fstaging%2Fblogic.git net: phy: bcm7xxx: Modified to use global core register defines Modified the bcm7xxx phy driver to remove local core register defines and use the common ones from "include/linux/brcmphy.h" Signed-off-by: Arun Parameswaran Signed-off-by: David S. Miller --- diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c index efa31a655eb1..03d4809a9126 100644 --- a/drivers/net/phy/bcm7xxx.c +++ b/drivers/net/phy/bcm7xxx.c @@ -25,7 +25,6 @@ #define MII_BCM7XXX_100TX_DISC 0x14 #define MII_BCM7XXX_AUX_MODE 0x1d #define MII_BCM7XX_64CLK_MDIO BIT(12) -#define MII_BCM7XXX_CORE_BASE1E 0x1e #define MII_BCM7XXX_TEST 0x1f #define MII_BCM7XXX_SHD_MODE_2 BIT(2) @@ -46,8 +45,6 @@ #define AFE_VDAC_OTHERS_0 MISC_ADDR(0x39, 3) #define AFE_HPF_TRIM_OTHERS MISC_ADDR(0x3a, 0) -#define CORE_EXPB0 0xb0 - static void r_rc_cal_reset(struct phy_device *phydev) { /* Reset R_CAL/RC_CAL Engine */ @@ -76,7 +73,7 @@ static int bcm7xxx_28nm_b0_afe_config_init(struct phy_device *phydev) bcm_phy_write_misc(phydev, DSP_TAP10, 0x690b); /* Switch to CORE_BASE1E */ - phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0xd); + phy_write(phydev, MII_BRCM_CORE_BASE1E, 0xd); r_rc_cal_reset(phydev); @@ -127,7 +124,7 @@ static int bcm7xxx_28nm_d0_afe_config_init(struct phy_device *phydev) bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3); /* CORE_BASE1E, force trim to overwrite and set I_ext trim to 0000 */ - phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0x0010); + phy_write(phydev, MII_BRCM_CORE_BASE1E, 0x0010); /* DSP_TAP10, adjust bias current trim (+0% swing, +0 tick) */ bcm_phy_write_misc(phydev, DSP_TAP10, 0x011b); @@ -155,7 +152,7 @@ static int bcm7xxx_28nm_e0_plus_afe_config_init(struct phy_device *phydev) bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3); /* CORE_BASE1E, force trim to overwrite and set I_ext trim to 0000 */ - phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0x0010); + phy_write(phydev, MII_BRCM_CORE_BASE1E, 0x0010); /* DSP_TAP10, adjust bias current trim (+0% swing, +0 tick) */ bcm_phy_write_misc(phydev, DSP_TAP10, 0x011b);