From: Szabolcs Hubai Date: Fri, 24 Mar 2023 21:24:26 +0000 (+0100) Subject: comgt: add quirk for Mikrotik modems based on Mikrotik R11e-LTE6 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=91eca7b04ff1309c7408baa1f1631d7623ce50cf;p=openwrt%2Fstaging%2Fthess.git comgt: add quirk for Mikrotik modems based on Mikrotik R11e-LTE6 The MikroTik R11e-LTE6 modem goes into flight mode (CFUN=4) at startup and the radio is off (*RADIOPOWER: 0): AT+RESET OK OK *SIMDETEC:2,NOS *SIMDETEC:1,SIM *ICCID: 8936500119010596302 *EUICC: 1 +MSTK: 11, D025....74F3 *ADMINDATA: 0, 2, 0 +CPIN: READY *EUICC: 1 *ECCLIST: 5, 0, 112, 0, 000, 0, 08, 0, 118, 0, 911 +CREG: 0 $CREG: 0 +CESQ: 99,99,255,255,255,255 *CESQ: 99,99,255,255,255,255,0 +CGREG: 0 +CEREG: 0 +CESQ: 99,99,255,255,255,255 *CESQ: 99,99,255,255,255,255,0 *RADIOPOWER: 0 +MMSG: 0, 0 +MMSG: 0, 0 +MMSG: 1, 0 +MPBK: 1 While the chat script is able to establish the PPP connection, it's closed instantly by the modem: LCP terminated by peer. local2.info chat[7000]: send (ATD*99***1#^M) local2.info chat[7000]: expect (CONNECT) local2.info chat[7000]: ^M local2.info chat[7000]: ATD*99***1#^M^M local2.info chat[7000]: CONNECT local2.info chat[7000]: -- got it local2.info chat[7000]: send ( ^M) daemon.info pppd[6997]: Serial connection established. kern.info kernel: [ 453.659146] 3g-mikrotik: renamed from ppp0 daemon.info pppd[6997]: Renamed interface ppp0 to 3g-mikrotik daemon.info pppd[6997]: Using interface 3g-mikrotik daemon.notice pppd[6997]: Connect: 3g-mikrotik <--> /dev/ttyACM0 daemon.info pppd[6997]: LCP terminated by peer daemon.notice pppd[6997]: Connection terminated. daemon.notice pppd[6997]: Modem hangup daemon.info pppd[6997]: Exit. daemon.notice netifd: Interface 'mikrotik' is now down Sending "AT+CFUN=1" to modem deactivates the flight mode and solves the issue: daemon.notice netifd: Interface 'mikrotik' is setting up now daemon.notice netifd: mikrotik (7051): sending -> AT+CFUN=1 daemon.notice pppd[7137]: pppd 2.4.9 started by root, uid 0 local2.info chat[7140]: abort on (BUSY) local2.info chat[7140]: abort on (NO CARRIER) local2.info chat[7140]: abort on (ERROR) local2.info chat[7140]: report (CONNECT) local2.info chat[7140]: timeout set to 10 seconds local2.info chat[7140]: send (AT&F^M) local2.info chat[7140]: expect (OK) local2.info chat[7140]: ^M local2.info chat[7140]: +CESQ: 99,99,255,255,255,255^M local2.info chat[7140]: ^M local2.info chat[7140]: *CESQ: 99,99,255,255,255,255,0^M local2.info chat[7140]: AT&F^MAT&F^M^M local2.info chat[7140]: OK local2.info chat[7140]: -- got it ... local2.info chat[7140]: send (ATD*99***1#^M) local2.info chat[7140]: expect (CONNECT) local2.info chat[7140]: ^M local2.info chat[7140]: ATD*99***1#^M^M local2.info chat[7140]: CONNECT local2.info chat[7140]: -- got it local2.info chat[7140]: send ( ^M) daemon.info pppd[7137]: Serial connection established. kern.info kernel: [ 463.094254] 3g-mikrotik: renamed from ppp0 daemon.info pppd[7137]: Renamed interface ppp0 to 3g-mikrotik daemon.info pppd[7137]: Using interface 3g-mikrotik daemon.notice pppd[7137]: Connect: 3g-mikrotik <--> /dev/ttyACM0 daemon.warn pppd[7137]: Could not determine remote IP address: defaulting to 10.64.64.64 daemon.notice pppd[7137]: local IP address 100.112.63.62 daemon.notice pppd[7137]: remote IP address 10.64.64.64 daemon.notice pppd[7137]: primary DNS address 185.29.83.64 daemon.notice pppd[7137]: secondary DNS address 185.62.131.64 daemon.notice netifd: Network device '3g-mikrotik' link is up daemon.notice netifd: Interface 'mikrotik' is now up To send this AT command to the modem the "runcommand.gcom" script dependency is moved from comgt-ncm to comgt. As the comgt-ncm package depends on comgt already, this change is a NOOP from that point of view. But from the modem's point it is a low hanging fruit as the modem is usable with installing comgt and kmod-usb-ncm packages. Signed-off-by: Szabolcs Hubai --- diff --git a/package/network/utils/comgt/Makefile b/package/network/utils/comgt/Makefile index 24dae2521e..429c938602 100644 --- a/package/network/utils/comgt/Makefile +++ b/package/network/utils/comgt/Makefile @@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk PKG_NAME:=comgt PKG_VERSION:=0.32 -PKG_RELEASE:=34 +PKG_RELEASE:=35 PKG_SOURCE:=$(PKG_NAME).$(PKG_VERSION).tgz PKG_SOURCE_URL:=@SF/comgt @@ -79,6 +79,7 @@ define Package/comgt/install $(INSTALL_DATA) ./files/getcarrier.gcom $(1)/etc/gcom/getcarrier.gcom $(INSTALL_DATA) ./files/getcnum.gcom $(1)/etc/gcom/getcnum.gcom $(INSTALL_DATA) ./files/getimsi.gcom $(1)/etc/gcom/getimsi.gcom + $(INSTALL_DATA) ./files/runcommand.gcom $(1)/etc/gcom/runcommand.gcom $(INSTALL_DIR) $(1)/etc/hotplug.d/tty $(INSTALL_CONF) ./files/3g.usb $(1)/etc/hotplug.d/tty/30-3g $(INSTALL_DIR) $(1)/lib/netifd/proto @@ -96,7 +97,6 @@ endef define Package/comgt-ncm/install $(INSTALL_DIR) $(1)/etc/gcom $(INSTALL_DATA) ./files/ncm.json $(1)/etc/gcom/ncm.json - $(INSTALL_DATA) ./files/runcommand.gcom $(1)/etc/gcom/runcommand.gcom $(INSTALL_DIR) $(1)/lib/netifd/proto $(INSTALL_BIN) ./files/ncm.sh $(1)/lib/netifd/proto/ncm.sh endef diff --git a/package/network/utils/comgt/files/3g.sh b/package/network/utils/comgt/files/3g.sh index 9220cbf5a0..42ba894e59 100644 --- a/package/network/utils/comgt/files/3g.sh +++ b/package/network/utils/comgt/files/3g.sh @@ -72,6 +72,8 @@ proto_3g_setup() { *) CODE="2,2";; esac export MODE="AT^SYSCFG=${CODE},3FFFFFFF,2,4" + elif echo "$cardinfo" | grep -q "MikroTik"; then + COMMAND="AT+CFUN=1" gcom -d "$device" -s /etc/gcom/runcommand.gcom || return 1 fi if [ -n "$pincode" ]; then