From: Nikhil Badola Date: Mon, 17 Feb 2014 11:28:36 +0000 (+0530) Subject: fsl/usb: Limit phy_type comparison to first four characters X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=91d7746df89f858548fe535137b4b185a6a76d59;p=project%2Fbcm63xx%2Fu-boot.git fsl/usb: Limit phy_type comparison to first four characters Use first four characters for phy_type comparison. Strcmp() should not be used to check the phy_type string which maybe parsed by hwconfig_subarg(). Hwconfig_subarg() returns part of hwconfig string starting from phy_type value till the end of the string. Since phy_type could be either "utmi" or "ulpi", strncmp() should be used so that a comparison of "utmi;fsl_ddr:bank_intlv=auto" with "utmi" will succeed. Signed-off-by: Shaohui Xie Signed-off-by: Nikhil Badola Reviewed-by: York Sun --- diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 45e5d6a5bd..1ca7cf5d9b 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -86,7 +86,7 @@ int ehci_hcd_init(int index, enum usb_init_type init, #endif } - if (!strcmp(phy_type, "utmi")) { + if (!strncmp(phy_type, "utmi", 4)) { #if defined(CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY) setbits_be32(&ehci->control, PHY_CLK_SEL_UTMI); setbits_be32(&ehci->control, UTMI_PHY_EN);