From: Wolfram Sang Date: Sun, 21 May 2017 20:30:33 +0000 (+0200) Subject: HID: i2c-hid: move header file out of I2C realm X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=91b9ae48aadd7e634161372b0bc3ffc88a050e8b;p=openwrt%2Fstaging%2Fblogic.git HID: i2c-hid: move header file out of I2C realm include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang Acked-by: Benjamin Tissoires Signed-off-by: Jiri Kosina --- diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c index 8daa8ce64ebb..841aa43526eb 100644 --- a/drivers/hid/i2c-hid/i2c-hid.c +++ b/drivers/hid/i2c-hid/i2c-hid.c @@ -40,7 +40,7 @@ #include #include -#include +#include #include "../hid-ids.h" diff --git a/include/linux/i2c/i2c-hid.h b/include/linux/i2c/i2c-hid.h deleted file mode 100644 index 1fb088239d12..000000000000 --- a/include/linux/i2c/i2c-hid.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * HID over I2C protocol implementation - * - * Copyright (c) 2012 Benjamin Tissoires - * Copyright (c) 2012 Ecole Nationale de l'Aviation Civile, France - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - */ - -#ifndef __LINUX_I2C_HID_H -#define __LINUX_I2C_HID_H - -#include - -struct regulator; - -/** - * struct i2chid_platform_data - used by hid over i2c implementation. - * @hid_descriptor_address: i2c register where the HID descriptor is stored. - * @supply: regulator for powering on the device. - * @post_power_delay_ms: delay after powering on before device is usable. - * - * Note that it is the responsibility of the platform driver (or the acpi 5.0 - * driver, or the flattened device tree) to setup the irq related to the gpio in - * the struct i2c_board_info. - * The platform driver should also setup the gpio according to the device: - * - * A typical example is the following: - * irq = gpio_to_irq(intr_gpio); - * hkdk4412_i2c_devs5[0].irq = irq; // store the irq in i2c_board_info - * gpio_request(intr_gpio, "elan-irq"); - * s3c_gpio_setpull(intr_gpio, S3C_GPIO_PULL_UP); - */ -struct i2c_hid_platform_data { - u16 hid_descriptor_address; - struct regulator *supply; - int post_power_delay_ms; -}; - -#endif /* __LINUX_I2C_HID_H */ diff --git a/include/linux/platform_data/i2c-hid.h b/include/linux/platform_data/i2c-hid.h new file mode 100644 index 000000000000..1fb088239d12 --- /dev/null +++ b/include/linux/platform_data/i2c-hid.h @@ -0,0 +1,42 @@ +/* + * HID over I2C protocol implementation + * + * Copyright (c) 2012 Benjamin Tissoires + * Copyright (c) 2012 Ecole Nationale de l'Aviation Civile, France + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + */ + +#ifndef __LINUX_I2C_HID_H +#define __LINUX_I2C_HID_H + +#include + +struct regulator; + +/** + * struct i2chid_platform_data - used by hid over i2c implementation. + * @hid_descriptor_address: i2c register where the HID descriptor is stored. + * @supply: regulator for powering on the device. + * @post_power_delay_ms: delay after powering on before device is usable. + * + * Note that it is the responsibility of the platform driver (or the acpi 5.0 + * driver, or the flattened device tree) to setup the irq related to the gpio in + * the struct i2c_board_info. + * The platform driver should also setup the gpio according to the device: + * + * A typical example is the following: + * irq = gpio_to_irq(intr_gpio); + * hkdk4412_i2c_devs5[0].irq = irq; // store the irq in i2c_board_info + * gpio_request(intr_gpio, "elan-irq"); + * s3c_gpio_setpull(intr_gpio, S3C_GPIO_PULL_UP); + */ +struct i2c_hid_platform_data { + u16 hid_descriptor_address; + struct regulator *supply; + int post_power_delay_ms; +}; + +#endif /* __LINUX_I2C_HID_H */