From: Daniel F. Dickinson Date: Sat, 28 Jul 2018 12:52:39 +0000 (-0400) Subject: ath79: Port PowerCloud Systems CAP324 support X-Git-Tag: v19.07.0-rc1~3050 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=915966d86121613dad04ee77ca1849b1c2187e13;p=openwrt%2Fstaging%2Fhauke.git ath79: Port PowerCloud Systems CAP324 support The CAP324 was an AP for a NaaS offering that is now defunct. While previously supported in the ar71xx arch, there were some errata (to be fixed shortly). Notable differences from ar71xx support: 1) The method of getting the ath9k firmware for the PCIe 2ghz wifi has changed (due to changes in how the arch handles this), since this device doesn't use the EEPROM except to get the MAC address of the wifi. 2) /etc/config/wireless will need to be regenerated as the path(s) to the wireless device(s) have changed. 3) ath79 OpenWrt firmware no longer supports build an image that allows reverting to stock firmware (as the cloud service no longer exists, the stock firmware is useless), instead using all of the flash for image and overlay (less u-boot/env and art). 4) Initial network config treats the ethernet port as a Lan port with the standard default address (192.168.1.1 unless changed in .config --e.g. via menuconfig) instead of using DHCP (this was the default for the stock firmware, however for openwrt use this is rather confusion and counter-productive as the user has a harder time finding the device on the network. Signed-off-by: Daniel F. Dickinson --- diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds index e8f4e1d14e..4fa4434efe 100755 --- a/target/linux/ath79/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/base-files/etc/board.d/01_leds @@ -29,6 +29,10 @@ case "$board" in ucidef_set_led_switch "lan2" "LAN2" "netgear:green:lan2" "switch0" "0x04" "0x0f" ;; +"pcs,cap324") + ucidef_set_led_netdev "lan" "LAN" "pcs:lan:green" "eth0" + ;; + "pcs,cr5000") ucidef_set_led_usbdev "usb" "USB" "pcs:white:wps" "1-1" ;; diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index ca023f702f..55c1a31e9f 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -14,6 +14,7 @@ ath79_setup_interfaces() ;; "avm,fritz300e"|\ "ocedo,raccoon"|\ + "pcs,cap324"|\ "tplink,re450-v2"|\ "tplink,tl-mr10u"|\ "tplink,tl-wr703n"|\ diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index e1f0f521c8..a687239d44 100644 --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -57,6 +57,7 @@ case "$FIRMWARE" in ;; "netgear,wnr612-v2"|\ "on,n150r"|\ + "pcs,cap324"|\ "tplink,tl-mr3220-v1"|\ "tplink,tl-mr3420-v1"|\ "tplink,tl-wr740n-v2"|\ diff --git a/target/linux/ath79/dts/ar9344_pcs_cap324.dts b/target/linux/ath79/dts/ar9344_pcs_cap324.dts new file mode 100644 index 0000000000..57cf81694d --- /dev/null +++ b/target/linux/ath79/dts/ar9344_pcs_cap324.dts @@ -0,0 +1,179 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include +#include + +#include "ar9344.dtsi" + +/ { + model = "PowerCloud Systems CAP324"; + compatible = "pcs,cap324", "qca,ar9344"; + + aliases { + serial0 = &uart; + led-status = &status; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&jtag_disable_pins>; + + reset { + label = "Reset button"; + linux,code = ; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; + + leds { + compatible = "gpio-leds"; + + power_amber { + label = "pcs:amber:power"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + status: power_green { + label = "pcs:green:power"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + wlan_amber { + label = "pcs:amber:wlan"; + gpios = <&gpio 19 GPIO_ACTIVE_LOW>; + default-state = "off"; + linux,default-trigger = "phy1tpt"; + }; + + wlan_green { + label = "pcs:green:wlan"; + gpios = <&gpio 18 GPIO_ACTIVE_LOW>; + default-state = "off"; + linux,default-trigger = "phy0tpt"; + }; + + lan_amber { + label = "pcs:lan:amber"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + lan_green { + label = "pcs:lan:green"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + +}; + +&ref { + clock-frequency = <25000000>; +}; + +&uart { + status = "okay"; +}; + +&gpio { + status = "okay"; +}; + +&spi { + num-cs = <1>; + + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + uboot: partition@0 { + label = "u-boot"; + reg = <0x000000 0x040000>; + read-only; + }; + + partition@40000 { + label = "u-boot-env"; + reg = <0x040000 0x010000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x050000 0x0fa0000>; + }; + + art: partition@7f0000 { + label = "art"; + reg = <0xff0000 0x010000>; + read-only; + }; + }; + }; +}; + +&pcie { + status = "okay"; + + ath9k: wifi@168c,0030 { + compatible = "168c,0030"; + reg = <0x0000 0 0 0 0>; + mtd-mac-address = <&art 0x0>; + mtd-mac-address-increment = <(-2)>; + mtd-cal-data = <&art 0x5000>; + qca,no-eeprom; + qca,disable-5ghz; + #gpio-cells = <2>; + gpio-controller; + }; +}; + +&wmac { + status = "okay"; + + qca,disable-2ghz; + mtd-cal-data = <&art 0x1000>; + mtd-mac-address = <&art 0x0>; + mtd-mac-address-increment = <(-1)>; +}; + +&mdio0 { + status = "okay"; + + phy-mask = <0>; + + phy0: ethernet-phy@0 { + reg = <0>; + phy-mode = "rgmii"; + }; +}; + +ð0 { + status = "okay"; + + /* default for ar934x, except for 1000M */ + pll-data = <0x06000000 0x00000101 0x00001616>; + + mtd-mac-address = <&art 0x0>; + + phy-mode = "rgmii"; + phy-handle = <&phy0>; +}; diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index d8897784ea..7695349705 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -66,6 +66,15 @@ define Device/openmesh_om5p-ac-v2 endef TARGET_DEVICES += openmesh_om5p-ac-v2 +define Device/pcs_cap324 + ATH_SOC := ar9344 + DEVICE_TITLE := PowerCloud Systems CAP324 + IMAGE_SIZE := 16000k + IMAGES := sysupgrade.bin + SUPPORTED_DEVICES += cap324 +endef +TARGET_DEVICES += pcs_cap324 + define Device/pcs_cr5000 ATH_SOC := ar9344 DEVICE_TITLE := PowerCloud Systems CR5000