From: Felix Fietkau Date: Sun, 24 Jul 2005 19:58:14 +0000 (+0000) Subject: move wificonf and nvram stuff back to package/, remove build_mipsel/root, run install... X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=910f49d7b9c08f9745bd5eb60cfb800c940899c3;p=openwrt%2Fstaging%2Fnbd.git move wificonf and nvram stuff back to package/, remove build_mipsel/root, run install part of package/ for every board/kernel - fixes dependency mess SVN-Revision: 1540 --- diff --git a/openwrt/Makefile b/openwrt/Makefile index 45a9ba7ffb..d478227523 100644 --- a/openwrt/Makefile +++ b/openwrt/Makefile @@ -1,6 +1,6 @@ # Makefile for OpenWRT # -# Copyright (C) 2005 by Felix Fietkau +# Copyright (C) 2005 by Felix Fietkau # Copyright (C) 1999-2004 by Erik Andersen # # This program is free software; you can redistribute it and/or modify @@ -47,26 +47,6 @@ all: world .NOTPARALLEL: -############################################################## -# -# Build the toolchain -# -############################################################## -toolchain_install: - $(MAKE) -C toolchain install - -############################################################## -# -# Make all packages -# -############################################################## - -package_compile: target_compile - $(MAKE) -C package compile - -package_install: package_compile toolchain - $(MAKE) -C package install - ############################################################# # # You should probably leave this stuff alone unless you know @@ -77,9 +57,9 @@ package_install: package_compile toolchain # In this section, we need .config include .config.cmd -world: $(DL_DIR) $(BUILD_DIR) configtest toolchain_install package_install target_install package_index +world: $(DL_DIR) $(BUILD_DIR) configtest toolchain/install target/compile package/compile target/install package_index -.PHONY: all world clean dirclean distclean image_clean target_clean source target_install toolchain_install package_install configtest +.PHONY: all world clean dirclean distclean image_clean target_clean source configtest configtest: -cp .config .config.test @@ -90,12 +70,6 @@ package_index: $(STAGING_DIR)/usr/bin/ipkg-make-index . > Packages \ ) -target_compile: - $(MAKE) -C target compile - -target_install: - $(MAKE) -C target install - $(DL_DIR): @mkdir -p $(DL_DIR) @@ -125,7 +99,6 @@ image_clean: rm -rf $(BIN_DIR) target_clean: image_clean - rm -rf $(TARGET_DIR) rm -rf $(BUILD_DIR)/linux-*/root clean: target_clean @@ -188,8 +161,6 @@ randconfig: $(CONFIG)/conf -./scripts/configtest.pl allyesconfig: $(CONFIG)/conf - #@$(CONFIG)/conf -y $(CONFIG_CONFIG_IN) - #sed -i -e "s/^CONFIG_DEBUG.*/# CONFIG_DEBUG is not set/" .config -touch .config -cp .config .config.test @$(CONFIG)/conf -o $(CONFIG_CONFIG_IN) diff --git a/openwrt/package/Config.in b/openwrt/package/Config.in index 52c98588ae..93e55e73a7 100644 --- a/openwrt/package/Config.in +++ b/openwrt/package/Config.in @@ -98,7 +98,7 @@ source "package/wol/Config.in" source "package/wpa_supplicant/Config.in" source "package/wput/Config.in" source "package/xinetd/Config.in" -source "target/linux/package/wificonf/Config.in" +source "package/wificonf/Config.in" comment "Libraries" source "package/glib/Config.in" diff --git a/openwrt/package/Makefile b/openwrt/package/Makefile index 8e3a29e317..b002876139 100644 --- a/openwrt/package/Makefile +++ b/openwrt/package/Makefile @@ -2,6 +2,7 @@ include $(TOPDIR)/rules.mk package-:=tcp_wrappers +package-y:=nvram package-$(BR2_PACKAGE_AICCU) += aiccu package-$(BR2_PACKAGE_AMWALL) += amwall package-$(BR2_PACKAGE_ARPTABLES) += arptables @@ -134,6 +135,7 @@ package-$(BR2_PACKAGE_ULOGD) += ulogd package-$(BR2_PACKAGE_USBUTILS) += usbutils package-$(BR2_PACKAGE_VTUN) += vtun package-$(BR2_PACKAGE_VSFTPD) += vsftpd +package-$(BR2_PACKAGE_WIFICONF) += wificonf package-$(BR2_PACKAGE_WIRELESS_TOOLS) += wireless-tools package-$(BR2_PACKAGE_WOL) += wol package-$(BR2_PACKAGE_WPA_SUPPLICANT) += wpa_supplicant @@ -141,19 +143,19 @@ package-$(BR2_PACKAGE_WPUT) += wput package-$(BR2_PACKAGE_XINETD) += xinetd package-$(BR2_PACKAGE_ZLIB) += zlib -DEV_LIBS:=tcp_wrappers glib ncurses openssl pcre popt zlib libnet libpcap mysql postgresql iptables matrixssl lzo gmp fuse portmap libelf uclibc++ speex libpng libgd wireless-tools +DEV_LIBS:=tcp_wrappers glib ncurses openssl pcre popt zlib libnet libpcap mysql postgresql iptables matrixssl lzo gmp fuse portmap libelf uclibc++ speex libpng libgd wireless-tools nvram DEV_LIBS_COMPILE:=$(patsubst %,%-compile,$(DEV_LIBS)) SDK_DEFAULT_PACKAGES:=busybox dnsmasq iptables wireless-tools dropbear bridge ipkg ppp SDK_DEFAULT_COMPILE:=$(patsubst %,%-compile,$(SDK_DEFAULT_PACKAGES)) COMPILE_PACKAGES:=$(patsubst %,%-compile,$(package-y) $(package-m)) INSTALL_PACKAGES:=$(patsubst %,%-install,$(package-y)) -all: compile install +all: compile clean: $(patsubst %,%-clean,$(package-) $(package-y) $(package-m)) compile: $(COMPILE_PACKAGES) install: base-files-install $(INSTALL_PACKAGES) -$(COMPILE_PACKAGES): base-files-install +$(COMPILE_PACKAGES): base-files-compile $(INSTALL_PACKAGES): base-files-install amwall-compile: libamsel-compile @@ -199,7 +201,7 @@ tinc-compile: zlib-compile openssl-compile lzo-compile tor-compile: libevent-compile openssl-compile zlib-compile usbutils-compile: libusb-compile vtun-compile: zlib-compile openssl-compile lzo-compile -wificonf-compile: wireless-tools-compile +wificonf-compile: wireless-tools-compile nvram-compile wpa_supplicant-compile: openssl-compile asterisk-compile: ncurses-compile openssl-compile @@ -292,8 +294,11 @@ $(STAMP_DIR): @touch $(STAMP_DIR)/.$@ %-install: %-compile - @[ -f $(STAMP_DIR)/.$@ ] || $(MAKE) -C $(patsubst %-install,%,$@) install - @touch $(STAMP_DIR)/.$@ + @$(MAKE) -C $(patsubst %-install,%,$@) \ + TARGET_DIR="$(TARGET_DIR)" \ + IPKG_CONF="$(IPKG_CONF)" \ + BOARD="$(BOARD)" \ + install %-rebuild: @rm -f $(STAMP_DIR)/.$(patsubst %-rebuild,%,$@)-* diff --git a/openwrt/package/base-files/Makefile b/openwrt/package/base-files/Makefile index c8f8f67196..e2c47b51c2 100644 --- a/openwrt/package/base-files/Makefile +++ b/openwrt/package/base-files/Makefile @@ -4,23 +4,29 @@ include $(TOPDIR)/rules.mk PKG_NAME:=base-files PKG_RELEASE:=1 +PKG_BUILD_DIR:=$(BUILD_DIR)/base-files -IDIR_BASE:=$(BUILD_DIR)/base-files +include $(TOPDIR)/package/rules.mk + +IDIR_BASE:=$(PKG_BUILD_DIR)/base-files IPKG_BASE:=$(PACKAGE_DIR)/$(PKG_NAME)_$(PKG_RELEASE)_$(ARCH).ipk LIBC_VERSION:=${shell cat $(STAGING_DIR)/uclibc_version} -IDIR_LIBC:=$(BUILD_DIR)/uclibc +IDIR_LIBC:=$(PKG_BUILD_DIR)/uclibc IPKG_LIBC:=$(PACKAGE_DIR)/uclibc_$(LIBC_VERSION)-$(PKG_RELEASE)_$(ARCH).ipk GCC_VERSION:=${shell cat $(STAGING_DIR)/gcc_version} -IDIR_GCC:=$(BUILD_DIR)/libgcc +IDIR_GCC:=$(PKG_BUILD_DIR)/libgcc IPKG_GCC:=$(PACKAGE_DIR)/libgcc_$(GCC_VERSION)-$(PKG_RELEASE)_$(ARCH).ipk PACKAGES:=$(IPKG_BASE) $(IPKG_LIBC) $(IPKG_GCC) -$(PACKAGES): $(PACKAGE_DIR) -$(PACKAGE_DIR): - mkdir -p $@ +$(PKG_BUILD_DIR)/.prepared: + mkdir -p $(PKG_BUILD_DIR) $(PACKAGE_DIR) + touch $@ + +$(PKG_BUILD_DIR)/.built: + touch $@ $(IPKG_BASE): $(SCRIPT_DIR)/make-ipkg-dir.sh $(IDIR_BASE) ipkg/$(PKG_NAME).control $(PKG_RELEASE) $(ARCH) @@ -63,5 +69,3 @@ compile: $(PACKAGES) install: compile mkdir -p $(TARGET_DIR) $(IPKG) install $(PACKAGES) -clean: - rm -rf $(IDIR_BASE) $(IDIR_LIBC) $(IDIR_GCC) diff --git a/openwrt/package/nvram/Makefile b/openwrt/package/nvram/Makefile new file mode 100644 index 0000000000..9885f99089 --- /dev/null +++ b/openwrt/package/nvram/Makefile @@ -0,0 +1,46 @@ +# $Id$ + +include $(TOPDIR)/rules.mk + +PKG_NAME:=nvram +PKG_RELEASE:=1 + +PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME) + +include $(TOPDIR)/package/rules.mk + +# does not depend on menuconfig +ifneq ($(BOARD),brcm) +BR2_PACKAGE_NVRAM:=m +else +BR2_PACKAGE_NVRAM:=y +endif + +$(eval $(call PKG_template,NVRAM,nvram,$(PKG_RELEASE),$(ARCH))) + +$(PKG_BUILD_DIR)/.prepared: + mkdir -p $(PKG_BUILD_DIR) + cp -a ./src/* $(PKG_BUILD_DIR) + touch $@ + +$(PKG_BUILD_DIR)/.built: + $(MAKE) -C $(PKG_BUILD_DIR) \ + $(TARGET_CONFIGURE_OPTS) \ + CFLAGS="$(TARGET_CFLAGS) -I $(STAGING_DIR)/usr/include" + touch $@ + +$(IPKG_NVRAM): + mkdir -p $(IDIR_NVRAM)/usr/lib + cp $(PKG_BUILD_DIR)/*.so $(IDIR_NVRAM)/usr/lib + mkdir -p $(IDIR_NVRAM)/usr/sbin + cp $(PKG_BUILD_DIR)/nvram $(IDIR_NVRAM)/usr/sbin + $(RSTRIP) $(IDIR_NVRAM) + $(IPKG_BUILD) $(IDIR_NVRAM) $(PACKAGE_DIR) + + +compile: install-dev +install-dev: + mkdir -p $(STAGING_DIR)/usr/lib + cp $(PKG_BUILD_DIR)/*.so $(STAGING_DIR)/usr/lib + + diff --git a/openwrt/package/nvram/ipkg/nvram.control b/openwrt/package/nvram/ipkg/nvram.control new file mode 100644 index 0000000000..bb25813030 --- /dev/null +++ b/openwrt/package/nvram/ipkg/nvram.control @@ -0,0 +1,7 @@ +Package: nvram +Priority: optional +Section: sys +Maintainer: Felix Fietkau +Source: buildroot internal +Description: NVRAM utility and libraries for Broadcom hardware + diff --git a/openwrt/package/nvram/src/Makefile b/openwrt/package/nvram/src/Makefile new file mode 100644 index 0000000000..376c2b7de7 --- /dev/null +++ b/openwrt/package/nvram/src/Makefile @@ -0,0 +1,22 @@ +# $Id$ + +EXTRA_CFLAGS := -c -I. -I../include +LIBSHARED_OBJS := shutils.o wl.o wl_linux.o defaults.o linux_timer.o +LIBNVRAM_OBJS := nvram_linux.o nvram_convert.o + +all: libshared.so libnvram.so nvram + +%.o: %.c + $(CC) $(CFLAGS) $(EXTRA_CFLAGS) -o $@ $^ + +libshared.so: $(LIBSHARED_OBJS) + $(CC) -shared -o $@ $^ + +libnvram.so: $(LIBNVRAM_OBJS) + $(CC) -shared -o $@ $^ + +nvram: main.o + $(CC) -o $@ $^ -L. -lnvram + +clean: + rm -f *.o *.so nvram diff --git a/openwrt/package/nvram/src/bcmtimer.h b/openwrt/package/nvram/src/bcmtimer.h new file mode 100644 index 0000000000..3db9e624f9 --- /dev/null +++ b/openwrt/package/nvram/src/bcmtimer.h @@ -0,0 +1,42 @@ +/* + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * Low resolution timer interface. Timer handlers may be called + * in a deferred manner in a different task context after the + * timer expires or in the task context from which the timer + * was created, depending on the implementation. + * + * $Id$ + */ +#ifndef __bcmtimer_h__ +#define __bcmtimer_h__ + +/* ANSI headers */ +#include + +/* timer ID */ +typedef unsigned int bcm_timer_module_id; +typedef unsigned int bcm_timer_id; + +/* timer callback */ +typedef void (*bcm_timer_cb)(bcm_timer_id id, int data); + +/* OS-independant interfaces, applications should call these functions only */ +int bcm_timer_module_init(int timer_entries, bcm_timer_module_id *module_id); +int bcm_timer_module_cleanup(bcm_timer_module_id module_id); +int bcm_timer_module_enable(bcm_timer_module_id module_id, int enable); +int bcm_timer_create(bcm_timer_module_id module_id, bcm_timer_id *timer_id); +int bcm_timer_delete(bcm_timer_id timer_id); +int bcm_timer_gettime(bcm_timer_id timer_id, struct itimerspec *value); +int bcm_timer_settime(bcm_timer_id timer_id, const struct itimerspec *value); +int bcm_timer_connect(bcm_timer_id timer_id, bcm_timer_cb func, int data); +int bcm_timer_cancel(bcm_timer_id timer_id); +int bcm_timer_change_expirytime(bcm_timer_id timer_id, const struct itimerspec *timer_spec); + +#endif /* #ifndef __bcmtimer_h__ */ diff --git a/openwrt/package/nvram/src/defaults.c b/openwrt/package/nvram/src/defaults.c new file mode 100644 index 0000000000..119eaac72e --- /dev/null +++ b/openwrt/package/nvram/src/defaults.c @@ -0,0 +1,179 @@ +/* + * Router default NVRAM values + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#include +#include +#include +#include +#include + +#define XSTR(s) STR(s) +#define STR(s) #s + +struct nvram_tuple router_defaults[] = { + /* OS parameters */ + { "os_name", "", 0 }, /* OS name string */ + { "os_version", EPI_VERSION_STR, 0 }, /* OS revision */ + { "os_date", __DATE__, 0 }, /* OS date */ + + /* Miscellaneous parameters */ + { "timer_interval", "3600", 0 }, /* Timer interval in seconds */ + { "ntp_server", "192.5.41.40 192.5.41.41 133.100.9.2", 0 }, /* NTP server */ + { "time_zone", "PST8PDT", 0 }, /* Time zone (GNU TZ format) */ + { "log_level", "0", 0 }, /* Bitmask 0:off 1:denied 2:accepted */ + { "upnp_enable", "0", 0 }, /* Start UPnP */ + { "ezc_enable", "1", 0 }, /* Enable EZConfig updates */ + { "ezc_version", "1", 0 }, /* EZConfig version */ + { "is_default", "1", 0 }, /* is it default setting: 1:yes 0:no*/ + { "os_server", "", 0 }, /* URL for getting upgrades */ + { "stats_server", "", 0 }, /* URL for posting stats */ + { "console_loglevel", "1", 0 }, /* Kernel panics only */ + + /* Big switches */ + { "router_disable", "0", 0 }, /* lan_proto=static lan_stp=0 wan_proto=disabled */ + { "fw_disable", "0", 0 }, /* Disable firewall (allow new connections from the WAN) */ + + { "log_ipaddr", "", 0 }, /* syslog recipient */ + + /* LAN H/W parameters */ + { "lan_ifname", "", 0 }, /* LAN interface name */ + { "lan_ifnames", "", 0 }, /* Enslaved LAN interfaces */ + { "lan_hwnames", "", 0 }, /* LAN driver names (e.g. et0) */ + { "lan_hwaddr", "", 0 }, /* LAN interface MAC address */ + + /* LAN TCP/IP parameters */ + { "lan_proto", "dhcp", 0 }, /* [static|dhcp] */ + { "lan_ipaddr", "192.168.1.1", 0 }, /* LAN IP address */ + { "lan_netmask", "255.255.255.0", 0 }, /* LAN netmask */ + { "lan_stp", "0", 0 }, /* LAN spanning tree protocol */ + { "lan_wins", "", 0 }, /* x.x.x.x x.x.x.x ... */ + { "lan_domain", "", 0 }, /* LAN domain name */ + { "lan_lease", "86400", 0 }, /* LAN lease time in seconds */ + + /* WAN H/W parameters */ + { "wan_ifname", "", 0 }, /* WAN interface name */ + { "wan_ifnames", "", 0 }, /* WAN interface names */ + { "wan_hwname", "", 0 }, /* WAN driver name (e.g. et1) */ + { "wan_hwaddr", "", 0 }, /* WAN interface MAC address */ + + /* WAN TCP/IP parameters */ + { "wan_proto", "dhcp", 0 }, /* [static|dhcp|pppoe|disabled] */ + { "wan_ipaddr", "0.0.0.0", 0 }, /* WAN IP address */ + { "wan_netmask", "0.0.0.0", 0 }, /* WAN netmask */ + { "wan_gateway", "0.0.0.0", 0 }, /* WAN gateway */ + { "wan_dns", "", 0 }, /* x.x.x.x x.x.x.x ... */ + { "wan_wins", "", 0 }, /* x.x.x.x x.x.x.x ... */ + { "wan_hostname", "", 0 }, /* WAN hostname */ + { "wan_domain", "", 0 }, /* WAN domain name */ + { "wan_lease", "86400", 0 }, /* WAN lease time in seconds */ + + /* PPPoE parameters */ + { "wan_pppoe_ifname", "", 0 }, /* PPPoE enslaved interface */ + { "wan_pppoe_username", "", 0 }, /* PPP username */ + { "wan_pppoe_passwd", "", 0 }, /* PPP password */ + { "wan_pppoe_idletime", "60", 0 }, /* Dial on demand max idle time (seconds) */ + { "wan_pppoe_keepalive", "0", 0 }, /* Restore link automatically */ + { "wan_pppoe_demand", "0", 0 }, /* Dial on demand */ + { "wan_pppoe_mru", "1492", 0 }, /* Negotiate MRU to this value */ + { "wan_pppoe_mtu", "1492", 0 }, /* Negotiate MTU to the smaller of this value or the peer MRU */ + { "wan_pppoe_service", "", 0 }, /* PPPoE service name */ + { "wan_pppoe_ac", "", 0 }, /* PPPoE access concentrator name */ + + /* Misc WAN parameters */ + { "wan_desc", "", 0 }, /* WAN connection description */ + { "wan_route", "", 0 }, /* Static routes (ipaddr:netmask:gateway:metric:ifname ...) */ + { "wan_primary", "0", 0 }, /* Primary wan connection */ + + { "wan_unit", "0", 0 }, /* Last configured connection */ + + /* Filters */ + { "filter_maclist", "", 0 }, /* xx:xx:xx:xx:xx:xx ... */ + { "filter_macmode", "deny", 0 }, /* "allow" only, "deny" only, or "disabled" (allow all) */ + { "filter_client0", "", 0 }, /* [lan_ipaddr0-lan_ipaddr1|*]:lan_port0-lan_port1,proto,enable,day_start-day_end,sec_start-sec_end,desc */ + + /* Port forwards */ + { "dmz_ipaddr", "", 0 }, /* x.x.x.x (equivalent to 0-60999>dmz_ipaddr:0-60999) */ + { "forward_port0", "", 0 }, /* wan_port0-wan_port1>lan_ipaddr:lan_port0-lan_port1[:,]proto[:,]enable[:,]desc */ + { "autofw_port0", "", 0 }, /* out_proto:out_port,in_proto:in_port0-in_port1>to_port0-to_port1,enable,desc */ + + /* DHCP server parameters */ + { "dhcp_start", "192.168.1.100", 0 }, /* First assignable DHCP address */ + { "dhcp_end", "192.168.1.150", 0 }, /* Last assignable DHCP address */ + { "dhcp_domain", "wan", 0 }, /* Use WAN domain name first if available (wan|lan) */ + { "dhcp_wins", "wan", 0 }, /* Use WAN WINS first if available (wan|lan) */ + + /* Web server parameters */ + { "http_username", "", 0 }, /* Username */ + { "http_passwd", "admin", 0 }, /* Password */ + { "http_wanport", "", 0 }, /* WAN port to listen on */ + { "http_lanport", "80", 0 }, /* LAN port to listen on */ + + /* Wireless parameters */ + { "wl_ifname", "", 0 }, /* Interface name */ + { "wl_hwaddr", "", 0 }, /* MAC address */ + { "wl_phytype", "g", 0 }, /* Current wireless band ("a" (5 GHz), "b" (2.4 GHz), or "g" (2.4 GHz)) */ + { "wl_corerev", "", 0 }, /* Current core revision */ + { "wl_phytypes", "", 0 }, /* List of supported wireless bands (e.g. "ga") */ + { "wl_radioids", "", 0 }, /* List of radio IDs */ + { "wl_ssid", "OpenWrt", 0 }, /* Service set ID (network name) */ + { "wl_country", "", 0 }, /* Country (default obtained from driver) */ + { "wl_radio", "1", 0 }, /* Enable (1) or disable (0) radio */ + { "wl_closed", "0", 0 }, /* Closed (hidden) network */ + { "wl_ap_isolate", "0", 0 }, /* AP isolate mode */ + { "wl_mode", "ap", 0 }, /* AP mode (ap|sta|wds) */ + { "wl_lazywds", "0", 0 }, /* Enable "lazy" WDS mode (0|1) */ + { "wl_wds", "", 0 }, /* xx:xx:xx:xx:xx:xx ... */ + { "wl_wep", "disabled", 0 }, /* WEP data encryption (enabled|disabled) */ + { "wl_auth", "0", 0 }, /* Shared key authentication optional (0) or required (1) */ + { "wl_key", "1", 0 }, /* Current WEP key */ + { "wl_key1", "", 0 }, /* 5/13 char ASCII or 10/26 char hex */ + { "wl_key2", "", 0 }, /* 5/13 char ASCII or 10/26 char hex */ + { "wl_key3", "", 0 }, /* 5/13 char ASCII or 10/26 char hex */ + { "wl_key4", "", 0 }, /* 5/13 char ASCII or 10/26 char hex */ + { "wl_maclist", "", 0 }, /* xx:xx:xx:xx:xx:xx ... */ + { "wl_macmode", "disabled", 0 }, /* "allow" only, "deny" only, or "disabled" (allow all) */ + { "wl_channel", "11", 0 }, /* Channel number */ + { "wl_rate", "0", 0 }, /* Rate (bps, 0 for auto) */ + { "wl_rateset", "default", 0 }, /* "default" or "all" or "12" */ + { "wl_frag", "2346", 0 }, /* Fragmentation threshold */ + { "wl_rts", "2347", 0 }, /* RTS threshold */ + { "wl_dtim", "1", 0 }, /* DTIM period */ + { "wl_bcn", "100", 0 }, /* Beacon interval */ + { "wl_plcphdr", "long", 0 }, /* 802.11b PLCP preamble type */ + { "wl_net_mode", "mixed", 0 }, /* 54g mode */ + { "wl_gmode", "6", 0 }, /* 54g mode */ + { "wl_gmode_protection", "auto", 0 }, /* 802.11g RTS/CTS protection (off|auto) */ + { "wl_afterburner", "auto", 0 }, /* AfterBurner */ + { "wl_frameburst", "off", 0 }, /* BRCM Frambursting mode (off|on) */ + { "wl_antdiv", "-1", 0 }, /* Antenna Diversity (-1|0|1|3) */ + { "wl_infra", "1", 0 }, /* Network Type (BSS/IBSS) */ + + /* WPA parameters */ + { "security_mode", "open", 0 }, + { "wl_auth_mode", "open", 0 }, /* Network authentication mode (open|shared|radius|wpa|psk) */ + { "wl_wpa_psk", "", 0 }, /* WPA pre-shared key */ + { "wl_wpa_gtk_rekey", "3600", 0 }, /* GTK rotation interval */ + { "wl_radius_ipaddr", "", 0 }, /* RADIUS server IP address */ + { "wl_radius_key", "", 0 }, /* RADIUS shared secret */ + { "wl_radius_port", "1812", 0 }, /* RADIUS server UDP port */ + { "wl_crypto", "tkip", 0 }, /* WPA data encryption */ + + + { "wl_unit", "0", 0 }, /* Last configured interface */ + + /* Restore defaults */ + { "restore_defaults", "0", 0 }, /* Set to 0 to not restore defaults on boot */ + + { 0, 0, 0 } +}; diff --git a/openwrt/package/nvram/src/linux_timer.c b/openwrt/package/nvram/src/linux_timer.c new file mode 100644 index 0000000000..0402e44378 --- /dev/null +++ b/openwrt/package/nvram/src/linux_timer.c @@ -0,0 +1,738 @@ +/* + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * Low resolution timer interface linux specific implementation. + * + * $Id$ + */ + +/* +* debug facilities +*/ +#define TIMER_DEBUG 0 +#if TIMER_DEBUG +#define TIMERDBG(fmt, args...) printf("%s: " fmt "\n" , __FUNCTION__ , ## args) +#else +#define TIMERDBG(fmt, args...) +#endif + + +/* + * POSIX timer support for Linux. Taken from linux_timer.c in upnp + */ + +#define __USE_GNU + + +#include // for malloc, free, etc. +#include // for memset, strncasecmp, etc. +#include // for assert, of course. +#include // for sigemptyset, etc. +#include // for printf, etc. +#include +#include + +/* define TIMER_PROFILE to enable code which guages how accurate the timer functions are. + For each expiring timer the code will print the expected time interval and the actual time interval. +#define TIMER_PROFILE +*/ +#undef TIMER_PROFILE + +/* +timer_cancel( ) - cancel a timer +timer_connect( ) - connect a user routine to the timer signal +timer_create( ) - allocate a timer using the specified clock for a timing base (POSIX) +timer_delete( ) - remove a previously created timer (POSIX) +timer_gettime( ) - get the remaining time before expiration and the reload value (POSIX) +timer_getoverrun( ) - return the timer expiration overrun (POSIX) +timer_settime( ) - set the time until the next expiration and arm timer (POSIX) +nanosleep( ) - suspend the current task until the time interval elapses (POSIX) +*/ + +#define MS_PER_SEC 1000 +#define US_PER_SEC 1000000 +#define US_PER_MS 1000 +#define UCLOCKS_PER_SEC 1000000 + +typedef void (*event_callback_t)(timer_t, int); + +#ifndef TIMESPEC_TO_TIMEVAL +# define TIMESPEC_TO_TIMEVAL(tv, ts) { \ + (tv)->tv_sec = (ts)->tv_sec; \ + (tv)->tv_usec = (ts)->tv_nsec / 1000; \ +} +#endif + +#ifndef TIMEVAL_TO_TIMESPEC +# define TIMEVAL_TO_TIMESPEC(tv, ts) { \ + (ts)->tv_sec = (tv)->tv_sec; \ + (ts)->tv_nsec = (tv)->tv_usec * 1000; \ +} +#endif + +#define ROUNDUP(x,y) ((((x)+(y)-1)/(y))*(y)) + +#define timerroundup(t,g) \ + do { \ + if (!timerisset(t)) (t)->tv_usec=1; \ + if ((t)->tv_sec == 0) (t)->tv_usec=ROUNDUP((t)->tv_usec, g); \ + } while (0) + +typedef long uclock_t; + +#define TFLAG_NONE 0 +#define TFLAG_CANCELLED (1<<0) +#define TFLAG_DELETED (1<<1) + +struct event { + struct timeval it_interval; + struct timeval it_value; + event_callback_t func; + int arg; + unsigned short flags; + struct event *next; +#ifdef TIMER_PROFILE + uint expected_ms; + uclock_t start; +#endif +}; + +void timer_cancel(timer_t timerid); + +static void alarm_handler(int i); +static void check_event_queue(); +static void print_event_queue(); +static void check_timer(); +#if THIS_FINDS_USE +static int count_queue(struct event *); +#endif +static int timer_change_settime(timer_t timer_id, const struct itimerspec *timer_spec); +void block_timer(); +void unblock_timer(); + +static struct event *event_queue = NULL; +static struct event *event_freelist; +static uint g_granularity; +static int g_maxevents = 0; + +uclock_t uclock() +{ + struct timeval tv; + + gettimeofday(&tv, NULL); + return ((tv.tv_sec * US_PER_SEC) + tv.tv_usec); +} + + +void init_event_queue(int n) +{ + int i; + struct itimerval tv; + + g_maxevents = n; + event_freelist = (struct event *) malloc(n * sizeof(struct event)); + memset(event_freelist, 0, n * sizeof(struct event)); + + for (i = 0; i < (n-1); i++) + event_freelist[i].next = &event_freelist[i+1]; + + event_freelist[i].next = NULL; + + tv.it_interval.tv_sec = 0; + tv.it_interval.tv_usec = 1; + tv.it_value.tv_sec = 0; + tv.it_value.tv_usec = 0; + setitimer (ITIMER_REAL, &tv, 0); + setitimer (ITIMER_REAL, 0, &tv); + g_granularity = tv.it_interval.tv_usec; + + signal(SIGALRM, alarm_handler); +} + + +int clock_gettime( + clockid_t clock_id, /* clock ID (always CLOCK_REALTIME) */ + struct timespec * tp /* where to store current time */ +) +{ + struct timeval tv; + int n; + + + n = gettimeofday(&tv, NULL); + TIMEVAL_TO_TIMESPEC(&tv, tp); + + return n; +} + + +int timer_create( + clockid_t clock_id, /* clock ID (always CLOCK_REALTIME) */ + struct sigevent * evp, /* user event handler */ + timer_t * pTimer /* ptr to return value */ +) +{ + struct event *event; + + if (clock_id != CLOCK_REALTIME) { + TIMERDBG("timer_create can only support clock id CLOCK_REALTIME"); + exit(1); + } + + if (evp != NULL) { + if (evp->sigev_notify != SIGEV_SIGNAL || evp->sigev_signo != SIGALRM) { + TIMERDBG("timer_create can only support signalled alarms using SIGALRM"); + exit(1); + } + } + + event = event_freelist; + if (event == NULL) { + print_event_queue(); + } + assert(event != NULL); + + event->flags = TFLAG_NONE; + + event_freelist = event->next; + event->next = NULL; + + check_event_queue(); + + *pTimer = (timer_t) event; + + return 0; +} + +int timer_delete( + timer_t timerid /* timer ID */ +) +{ + struct event *event = (struct event *) timerid; + + if (event->flags & TFLAG_DELETED) { + TIMERDBG("Cannot delete a deleted event"); + return 1; + } + + timer_cancel(timerid); + + event->flags |= TFLAG_DELETED; + + event->next = event_freelist; + event_freelist = event; + + return 0; +} + +int timer_connect +( + timer_t timerid, /* timer ID */ + void (*routine)(timer_t, int), /* user routine */ + int arg /* user argument */ +) +{ + struct event *event = (struct event *) timerid; + + assert(routine != NULL); + event->func = routine; + event->arg = arg; + + return 0; +} + +/* + * Please Call this function only from the call back functions of the alarm_handler. + * This is just a hack +*/ +int timer_change_settime +( + timer_t timerid, /* timer ID */ + const struct itimerspec * value /* time to be set */ +) +{ + struct event *event = (struct event *) timerid; + + TIMESPEC_TO_TIMEVAL(&event->it_interval, &value->it_interval); + TIMESPEC_TO_TIMEVAL(&event->it_value, &value->it_value); + + return 1; +} + +int timer_settime +( + timer_t timerid, /* timer ID */ + int flags, /* absolute or relative */ + const struct itimerspec * value, /* time to be set */ + struct itimerspec * ovalue /* previous time set (NULL=no result) */ +) +{ + struct itimerval itimer; + struct event *event = (struct event *) timerid; + struct event **ppevent; + + TIMESPEC_TO_TIMEVAL(&event->it_interval, &value->it_interval); + TIMESPEC_TO_TIMEVAL(&event->it_value, &value->it_value); + + /* if .it_value is zero, the timer is disarmed */ + if (!timerisset(&event->it_value)) { + timer_cancel(timerid); + return 0; + } + + block_timer(); + +#ifdef TIMER_PROFILE + event->expected_ms = (event->it_value.tv_sec * MS_PER_SEC) + (event->it_value.tv_usec / US_PER_MS); + event->start = uclock(); +#endif + if (event->next) { + TIMERDBG("calling timer_settime with a timer that is already on the queue."); + } + + + /* We always want to make sure that the event at the head of the + queue has a timeout greater than the itimer granularity. + Otherwise we end up with the situation that the time remaining + on an itimer is greater than the time at the head of the queue + in the first place. */ + timerroundup(&event->it_value, g_granularity); + + timerclear(&itimer.it_value); + getitimer(ITIMER_REAL, &itimer); + if (timerisset(&itimer.it_value)) { + // reset the top timer to have an interval equal to the remaining interval + // when the timer was cancelled. + if (event_queue) { + if (timercmp(&(itimer.it_value), &(event_queue->it_value), >)) { + // it is an error if the amount of time remaining is more than the amount of time + // requested by the top event. + // + TIMERDBG("timer_settime: TIMER ERROR!"); + + } else { + // some portion of the top event has already expired. + // Reset the interval of the top event to remaining + // time left in that interval. + // + event_queue->it_value = itimer.it_value; + + // if we were the earliest timer before now, we are still the earliest timer now. + // we do not need to reorder the list. + } + } + } + + // Now, march down the list, decrementing the new timer by the + // current it_value of each event on the queue. + ppevent = &event_queue; + while (*ppevent) { + if ( timercmp(&(event->it_value), &((*ppevent)->it_value), <) ) { + // if the proposed event will trigger sooner than the next event + // in the queue, we will insert the new event just before the next one. + // + // we also need to adjust the delta value to the next event. + timersub(&((*ppevent)->it_value), &(event->it_value), &((*ppevent)->it_value)); + break; + } + // subtract the interval of the next event from the proposed interval. + timersub(&(event->it_value), &((*ppevent)->it_value), &(event->it_value)); + + ppevent = &((*ppevent)->next); + } + + // we have found our proper place in the queue, + // link our new event into the pending event queue. + event->next = *ppevent; + *ppevent = event; + + check_event_queue(); + + // if our new event ended up at the front of the queue, reissue the timer. + if (event == event_queue) { + timerroundup(&event_queue->it_value, g_granularity); + timerclear(&itimer.it_interval); + itimer.it_value = event_queue->it_value; + + // we want to be sure to never turn off the timer completely, + // so if the next interval is zero, set it to some small value. + if (!timerisset(&(itimer.it_value))) + itimer.it_value = (struct timeval) { 0, 1 }; + + assert(!timerisset(&itimer.it_interval)); + assert(itimer.it_value.tv_sec > 0 || itimer.it_value.tv_usec >= g_granularity); + assert(event_queue->it_value.tv_sec > 0 || event_queue->it_value.tv_usec >= g_granularity); + setitimer(ITIMER_REAL, &itimer, NULL); + check_timer(); + } + + event->flags &= ~TFLAG_CANCELLED; + + unblock_timer(); + + return 0; +} + +static void check_timer() +{ + struct itimerval itimer; + + getitimer(ITIMER_REAL, &itimer); + if (timerisset(&itimer.it_interval)) { + TIMERDBG("ERROR timer interval is set."); + } + if (timercmp(&(itimer.it_value), &(event_queue->it_value), >)) { + TIMERDBG("ERROR timer expires later than top event."); + } +} + + +static void check_event_queue() +{ + struct timeval sum; + struct event *event; + int i = 0; + +#ifdef notdef + int nfree = 0; + struct event *p; + for (p = event_freelist; p; p = p->next) + nfree++; + printf("%d free events\n", nfree); +#endif + + timerclear(&sum); + for (event = event_queue; event; event = event->next) { + if (i > g_maxevents) { + TIMERDBG("timer queue looks like it loops back on itself!"); + print_event_queue(); + exit(1); + } + i++; + } +} + +#if THIS_FINDS_USE +/* The original upnp version has this unused function, so I left it in + to maintain the resemblance. */ +static int count_queue(struct event *event_queue) +{ + struct event *event; + int i = 0; + for (event = event_queue; event; event = event->next) + i++; + return i; +} +#endif + +static void print_event_queue() +{ + struct event *event; + int i = 0; + + for (event = event_queue; event; event = event->next) { + printf("#%d (0x%x)->0x%x: \t%d sec %d usec\t%p\n", + i++, (unsigned int) event, (unsigned int) event->next, (int) event->it_value.tv_sec, (int) event->it_value.tv_usec, event->func); + if (i > g_maxevents) { + printf("...(giving up)\n"); + break; + } + } +} + +// The top element of the event queue must have expired. +// Remove that element, run its function, and reset the timer. +// if there is no interval, recycle the event structure. +static void alarm_handler(int i) +{ + struct event *event, **ppevent; + struct itimerval itimer; + struct timeval small_interval = { 0, g_granularity/2 }; +#ifdef TIMER_PROFILE + uint junk; + uclock_t end; + uint actual; +#endif + + block_timer(); + + // Loop through the event queue and remove the first event plus any + // subsequent events that will expire very soon thereafter (within 'small_interval'}. + // + do { + // remove the top event. + event = event_queue; + event_queue = event_queue->next; + event->next = NULL; + +#ifdef TIMER_PROFILE + end = uclock(); + actual = ((end-event->start)/((uclock_t)UCLOCKS_PER_SEC/1000)); + if (actual < 0) + junk = end; + TIMERDBG("expected %d ms actual %d ms", event->expected_ms, ((end-event->start)/((uclock_t)UCLOCKS_PER_SEC/1000))); +#endif + + // call the event callback function + (*(event->func))((timer_t) event, (int)event->arg); + + /* If the event has been cancelled, do NOT put it back on the queue. */ + if ( !(event->flags & TFLAG_CANCELLED) ) { + + // if the event is a recurring event, reset the timer and + // find its correct place in the sorted list of events. + // + if (timerisset(&event->it_interval)) { + // event is recurring... + // + event->it_value = event->it_interval; +#ifdef TIMER_PROFILE + event->expected_ms = (event->it_value.tv_sec * MS_PER_SEC) + (event->it_value.tv_usec / US_PER_MS); + event->start = uclock(); +#endif + timerroundup(&event->it_value, g_granularity); + + // Now, march down the list, decrementing the new timer by the + // current delta of each event on the queue. + ppevent = &event_queue; + while (*ppevent) { + if ( timercmp(&(event->it_value), &((*ppevent)->it_value), <) ) { + // if the proposed event will trigger sooner than the next event + // in the queue, we will insert the new event just before the next one. + // + // we also need to adjust the delta value to the next event. + timersub(&((*ppevent)->it_value), &(event->it_value), &((*ppevent)->it_value)); + break; + } + timersub(&(event->it_value), &((*ppevent)->it_value), &(event->it_value)); + ppevent = &((*ppevent)->next); + } + + // we have found our proper place in the queue, + // link our new event into the pending event queue. + event->next = *ppevent; + *ppevent = event; + } else { + // there is no interval, so recycle the event structure. + //timer_delete((timer_t) event); + } + } + + check_event_queue(); + + } while (event_queue && timercmp(&event_queue->it_value, &small_interval, <)); + + // re-issue the timer... + if (event_queue) { + timerroundup(&event_queue->it_value, g_granularity); + + timerclear(&itimer.it_interval); + itimer.it_value = event_queue->it_value; + // we want to be sure to never turn off the timer completely, + // so if the next interval is zero, set it to some small value. + if (!timerisset(&(itimer.it_value))) + itimer.it_value = (struct timeval) { 0, 1 }; + + setitimer(ITIMER_REAL, &itimer, NULL); + check_timer(); + } else { + TIMERDBG("There are no events in the queue - timer not reset."); + } + + unblock_timer(); +} + +static int block_count = 0; + +void block_timer() +{ + sigset_t set; + + if (block_count++ == 0) { + sigemptyset(&set); + sigaddset(&set, SIGALRM); + sigprocmask(SIG_BLOCK, &set, NULL); + } +} + +void unblock_timer() +{ + sigset_t set; + + if (--block_count == 0) { + sigemptyset(&set); + sigaddset(&set, SIGALRM); + sigprocmask(SIG_UNBLOCK, &set, NULL); + } +} + +void timer_cancel_all() +{ + struct itimerval timeroff = { { 0, 0 }, { 0, 0} }; + struct event *event; + struct event **ppevent; + + setitimer(ITIMER_REAL, &timeroff, NULL); + + ppevent = &event_queue; + while (*ppevent) { + event = *ppevent; + *ppevent = event->next; + event->next = NULL; + } +} + + + +void timer_cancel(timer_t timerid) +{ + struct itimerval itimer; + struct itimerval timeroff = { { 0, 0 }, { 0, 0} }; + struct event *event = (struct event *) timerid; + struct event **ppevent; + + if (event->flags & TFLAG_CANCELLED) { + TIMERDBG("Cannot cancel a cancelled event"); + return; + } + + block_timer(); + + ppevent = &event_queue; + while (*ppevent) { + if ( *ppevent == event ) { + + /* RACE CONDITION - if the alarm goes off while we are in + this loop, and if the timer we want to cancel is the + next to expire, the alarm will end up firing + after this routine is complete, causing it to go off early. */ + + /* If the cancelled timer is the next to expire, + we need to do something special to clean up correctly. */ + if (event == event_queue && event->next != NULL) { + timerclear(&itimer.it_value); + getitimer(ITIMER_REAL, &itimer); + + /* subtract the time that has already passed while waiting for this timer... */ + timersub(&(event->it_value), &(itimer.it_value), &(event->it_value)); + + /* and add any remainder to the next timer in the list */ + timeradd(&(event->next->it_value), &(event->it_value), &(event->next->it_value)); + } + + *ppevent = event->next; + event->next = NULL; + + if (event_queue) { + timerroundup(&event_queue->it_value, g_granularity); + timerclear(&itimer.it_interval); + itimer.it_value = event_queue->it_value; + + /* We want to be sure to never turn off the timer + completely if there are more events on the queue, + so if the next interval is zero, set it to some + small value. */ + + if (!timerisset(&(itimer.it_value))) + itimer.it_value = (struct timeval) { 0, 1 }; + + assert(itimer.it_value.tv_sec > 0 || itimer.it_value.tv_usec >= g_granularity); + assert(event_queue->it_value.tv_sec > 0 || event_queue->it_value.tv_usec >= g_granularity); + setitimer(ITIMER_REAL, &itimer, NULL); + check_timer(); + } else { + setitimer(ITIMER_REAL, &timeroff, NULL); + } + break; + } + ppevent = &((*ppevent)->next); + } + + event->flags |= TFLAG_CANCELLED; + + unblock_timer(); +} + +/* +* timer related headers +*/ +#include "bcmtimer.h" + +/* +* locally used global variables and constants +*/ + +/* +* Initialize internal resources used in the timer module. It must be called +* before any other timer function calls. The param 'timer_entries' is used +* to pre-allocate fixed number of timer entries. +*/ +int bcm_timer_module_init(int timer_entries, bcm_timer_module_id *module_id) +{ + init_event_queue(timer_entries); + *module_id = (bcm_timer_module_id)event_freelist; + return 0; +} + +/* +* Cleanup internal resources used by this timer module. It deletes all +* pending timer entries from the backend timer system as well. +*/ +int bcm_timer_module_cleanup(bcm_timer_module_id module_id) +{ + module_id = 0; + return 0; +} + +/* Enable/Disable timer module */ +int bcm_timer_module_enable(bcm_timer_module_id module_id, int enable) +{ + if (enable) + unblock_timer(); + else + block_timer(); + return 0; +} + +int bcm_timer_create(bcm_timer_module_id module_id, bcm_timer_id *timer_id) +{ + module_id = 0; + return timer_create(CLOCK_REALTIME, NULL, (timer_t *)timer_id); +} + +int bcm_timer_delete(bcm_timer_id timer_id) +{ + return timer_delete((timer_t)timer_id); +} + +int bcm_timer_gettime(bcm_timer_id timer_id, struct itimerspec *timer_spec) +{ + return -1; +} + +int bcm_timer_settime(bcm_timer_id timer_id, const struct itimerspec *timer_spec) +{ + return timer_settime((timer_t)timer_id, 0, timer_spec, NULL); +} + +int bcm_timer_connect(bcm_timer_id timer_id, bcm_timer_cb func, int data) +{ + return timer_connect((timer_t)timer_id, (void *)func, data); +} + +int bcm_timer_cancel(bcm_timer_id timer_id) +{ + timer_cancel((timer_t)timer_id); + return 0; +} +int bcm_timer_change_expirytime(bcm_timer_id timer_id, const struct itimerspec *timer_spec) +{ + timer_change_settime((timer_t)timer_id, timer_spec); + return 1; +} diff --git a/openwrt/package/nvram/src/main.c b/openwrt/package/nvram/src/main.c new file mode 100644 index 0000000000..a64430f7bc --- /dev/null +++ b/openwrt/package/nvram/src/main.c @@ -0,0 +1,78 @@ +/* + * Frontend command-line utility for Linux NVRAM layer + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#include +#include +#include + +#include +#include + +static void +usage(void) +{ + fprintf(stderr, "usage: nvram [get name] [set name=value] [unset name] [show]\n"); + exit(0); +} + +/* NVRAM utility */ +int +main(int argc, char **argv) +{ + char *name, *value, buf[NVRAM_SPACE]; + int size; + + /* Skip program name */ + --argc; + ++argv; + + if (!*argv) + usage(); + + /* Process the remaining arguments. */ + for (; *argv; argv++) { + if (!strncmp(*argv, "get", 3)) { + if (*++argv) { + if ((value = nvram_get(*argv))) + puts(value); + } + } + else if (!strncmp(*argv, "set", 3)) { + if (*++argv) { + strncpy(value = buf, *argv, sizeof(buf)); + name = strsep(&value, "="); + nvram_set(name, value); + } + } + else if (!strncmp(*argv, "unset", 5)) { + if (*++argv) + nvram_unset(*argv); + } + else if (!strncmp(*argv, "commit", 5)) { + nvram_commit(); + } + else if (!strncmp(*argv, "show", 4) || + !strncmp(*argv, "getall", 6)) { + nvram_getall(buf, sizeof(buf)); + for (name = buf; *name; name += strlen(name) + 1) + puts(name); + size = sizeof(struct nvram_header) + (int) name - (int) buf; + fprintf(stderr, "size: %d bytes (%d left)\n", size, NVRAM_SPACE - size); + } + if (!*argv) + break; + } + + return 0; +} diff --git a/openwrt/package/nvram/src/nvram_convert.c b/openwrt/package/nvram/src/nvram_convert.c new file mode 100644 index 0000000000..485909026c --- /dev/null +++ b/openwrt/package/nvram/src/nvram_convert.c @@ -0,0 +1,77 @@ + +#define WL(a) "wl_"a +#define WL0(a) "wl0_"a +#define D11G(a) "d11g_"a + +#define PPP(a) "ppp_"a +#define PPPOE(a) "pppoe_"a + +struct nvram_convert { + char *name; // for WEB + char *wl0_name; // for driver + char *d11g_name; // for old nv name +}; + +struct nvram_convert nvram_converts[] = { + // Bellow change from 3.11.48.7 + { WL("ssid"), WL0("ssid"), ""}, + { WL("radio"), WL0("mode"), ""}, + { WL("mode"), WL0("mode"), ""}, + { WL("wds"), WL0("wds"), ""}, + { WL("auth"), WL0("auth"), ""}, + { WL("key"), WL0("key"), ""}, + { WL("key1"), WL0("key1"), ""}, + { WL("key2"), WL0("key2"), ""}, + { WL("key3"), WL0("key3"), ""}, + { WL("key4"), WL0("key4"), ""}, + { WL("maclist"), WL0("maclist"), ""}, + { WL("channel"), WL0("channel"), D11G("channel")}, + { WL("rateset"), WL0("rateset"), D11G("rateset")}, + { WL("rts"), WL0("rts"), D11G("rts")}, + { WL("bcn"), WL0("bcn"), D11G("bcn")}, + { WL("gmode"), WL0("gmode"), "d11g_mode"}, + { WL("unit"), WL0("unit"), ""}, + { WL("ifname"), WL0("ifname"), ""}, + { WL("phytype"), WL0("phytype"), ""}, + { WL("country"), WL0("country"), ""}, + { WL("closed"), WL0("closed"), ""}, + { WL("lazywds"), WL0("lazywds"), ""}, + { WL("wep"), WL0("wep"), ""}, + { WL("macmode"), WL0("macmode"), ""}, + { WL("rate"), WL0("rate"), D11G("rate")}, + { WL("frag"), WL0("frag"), D11G("frag")}, + { WL("dtim"), WL0("dtim"), D11G("dtim")}, + { WL("plcphdr"), WL0("plcphdr"), ""}, + { WL("gmode_protection"), WL0("gmode_protection"), ""}, + { WL("radio"), WL0("radio"), ""}, + // Bellow change from 3.21.9.0 + { WL("auth_mode"), WL0("auth_mode"), ""}, + { WL("radius_ipaddr"), WL0("radius_ipaddr"), ""}, + { WL("radius_port"), WL0("radius_port"), ""}, + { WL("radius_key"), WL0("radius_key"), ""}, + { WL("wpa_psk"), WL0("wpa_psk"), ""}, + { WL("wpa_gtk_rekey"), WL0("wpa_gtk_rekey"), ""}, + { WL("frameburst"), WL0("frameburst"), ""}, + { WL("crypto"), WL0("crypto"), ""}, + { WL("ap_isolate"), WL0("ap_isolate"), ""}, + { WL("afterburner"), WL0("afterburner"), ""}, + // for PPPoE + { PPP("username"), PPPOE("username"), ""}, + { PPP("passwd"), PPPOE("passwd"), ""}, + { PPP("idletime"), PPPOE("idletime"), ""}, + { PPP("keepalive"), PPPOE("keepalive"), ""}, + { PPP("demand"), PPPOE("demand"), ""}, + { PPP("service"), PPPOE("service"), ""}, + { PPP("ac"), PPPOE("ac"), ""}, + { PPP("static"), PPPOE("static"), ""}, + { PPP("static_ip"), PPPOE("static_ip"), ""}, + { PPP("username_1"), PPPOE("username_1"), ""}, + { PPP("passwd_1"), PPPOE("passwd_1"), ""}, + { PPP("idletime_1"), PPPOE("idletime_1"), ""}, + { PPP("keepalive_1"), PPPOE("keepalive_1"), ""}, + { PPP("demand_1"), PPPOE("demand_1"), ""}, + { PPP("service_1"), PPPOE("service_1"), ""}, + { PPP("ac_1"), PPPOE("ac_1"), ""}, + + { 0, 0, 0}, +}; diff --git a/openwrt/package/nvram/src/nvram_convert.h b/openwrt/package/nvram/src/nvram_convert.h new file mode 100644 index 0000000000..70e12327d1 --- /dev/null +++ b/openwrt/package/nvram/src/nvram_convert.h @@ -0,0 +1,7 @@ + +struct nvram_convert { + char *name; + char *wl0_name; + char *d11g_name; +}; + diff --git a/openwrt/package/nvram/src/nvram_linux.c b/openwrt/package/nvram/src/nvram_linux.c new file mode 100644 index 0000000000..c41e32118a --- /dev/null +++ b/openwrt/package/nvram/src/nvram_linux.c @@ -0,0 +1,320 @@ +/* + * NVRAM variable manipulation (Linux user mode half) + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#define PATH_DEV_NVRAM "/dev/nvram" + +/* Globals */ +static int nvram_fd = -1; +static char *nvram_buf = NULL; +int check_action(void); +int file_to_buf(char *path, char *buf, int len); + +int +nvram_init(void *unused) +{ + if ((nvram_fd = open(PATH_DEV_NVRAM, O_RDWR)) < 0) + goto err; + + /* Map kernel string buffer into user space */ + if ((nvram_buf = mmap(NULL, NVRAM_SPACE, PROT_READ, MAP_SHARED, nvram_fd, 0)) == MAP_FAILED) { + close(nvram_fd); + nvram_fd = -1; + goto err; + } + + return 0; + + err: + perror(PATH_DEV_NVRAM); + return errno; +} + +char * +nvram_get(const char *name) +{ + size_t count = strlen(name) + 1; + char tmp[100], *value; + unsigned long *off = (unsigned long *) tmp; + + if (nvram_fd < 0) + if (nvram_init(NULL)) + return NULL; + + if (count > sizeof(tmp)) { + if (!(off = malloc(count))) + return NULL; + } + + /* Get offset into mmap() space */ + strcpy((char *) off, name); + + count = read(nvram_fd, off, count); + + if (count == sizeof(unsigned long)) + value = &nvram_buf[*off]; + else + value = NULL; + + if (count < 0) + perror(PATH_DEV_NVRAM); + + if (off != (unsigned long *) tmp) + free(off); + + return value; +} + +int +nvram_getall(char *buf, int count) +{ + int ret; + + if (nvram_fd < 0) + if ((ret = nvram_init(NULL))) + return ret; + + if (count == 0) + return 0; + + /* Get all variables */ + *buf = '\0'; + + ret = read(nvram_fd, buf, count); + + if (ret < 0) + perror(PATH_DEV_NVRAM); + + return (ret == count) ? 0 : ret; +} + +static int +_nvram_set(const char *name, const char *value) +{ + size_t count = strlen(name) + 1; + char tmp[100], *buf = tmp; + int ret; + + if (nvram_fd < 0) + if ((ret = nvram_init(NULL))) + return ret; + + /* Unset if value is NULL */ + if (value) + count += strlen(value) + 1; + + if (count > sizeof(tmp)) { + if (!(buf = malloc(count))) + return -ENOMEM; + } + + if (value) + sprintf(buf, "%s=%s", name, value); + else + strcpy(buf, name); + + ret = write(nvram_fd, buf, count); + + if (ret < 0) + perror(PATH_DEV_NVRAM); + + if (buf != tmp) + free(buf); + + return (ret == count) ? 0 : ret; +} + +int +nvram_set(const char *name, const char *value) +{ + extern struct nvram_convert nvram_converts[]; + struct nvram_convert *v; + int ret; + + ret = _nvram_set(name, value); + + for(v = nvram_converts ; v->name ; v++) { + if(!strcmp(v->name, name)){ + if(strcmp(v->wl0_name,"")) _nvram_set(v->wl0_name, value); + if(strcmp(v->d11g_name,"")) _nvram_set(v->d11g_name, value); + } + } + + return ret; +} + +int +nvram_unset(const char *name) +{ + return _nvram_set(name, NULL); +} + +int +nvram_commit(void) +{ + int ret; + + cprintf("nvram_commit(): start\n"); + + if((check_action() == ACT_IDLE) || + (check_action() == ACT_SW_RESTORE) || + (check_action() == ACT_HW_RESTORE)){ + if (nvram_fd < 0) + if ((ret = nvram_init(NULL))) + return ret; + + ret = ioctl(nvram_fd, NVRAM_MAGIC, NULL); + + if (ret < 0) + perror(PATH_DEV_NVRAM); + + cprintf("nvram_commit(): end\n"); + } + else + cprintf("nvram_commit(): nothing to do...\n"); + + return ret; +} + +int file2nvram(char *filename, char *varname) { + FILE *fp; + int c,count; + int i=0,j=0; + char mem[10000],buf[30000]; + + if ( !(fp=fopen(filename,"rb") )) + return 0; + + count=fread(mem,1,sizeof(mem),fp); + fclose(fp); + for (j=0;j sizeof(buf)-3 ) + break; + c=mem[j]; + if (c >= 32 && c <= 126 && c != '\\' && c != '~') { + buf[i++]=(unsigned char) c; + } else if (c==0) { + buf[i++]='~'; + } else { + buf[i++]='\\'; + sprintf(buf+i,"%02X",c); + i+=2; + } + } + if (i==0) return 0; + buf[i]=0; + //fprintf(stderr,"================ > file2nvram %s = [%s] \n",varname,buf); + nvram_set(varname,buf); + //nvram_commit(); //Barry adds for test +} + +int nvram2file(char *varname, char *filename) { + FILE *fp; + int c,tmp; + int i=0,j=0; + char *buf; + char mem[10000]; + + if ( !(fp=fopen(filename,"wb") )) + return 0; + + buf=strdup(nvram_safe_get(varname)); + //fprintf(stderr,"=================> nvram2file %s = [%s] \n",varname,buf); + while ( buf[i] && j < sizeof(mem)-3 ) { + if (buf[i] == '\\') { + i++; + tmp=buf[i+2]; + buf[i+2]=0; + sscanf(buf+i,"%02X",&c); + buf[i+2]=tmp; + i+=2; + mem[j]=c;j++; + } else if (buf[i] == '~') { + mem[j]=0;j++; + i++; + } else { + mem[j]=buf[i];j++; + i++; + } + } + if (j<=0) return j; + j=fwrite(mem,1,j,fp); + fclose(fp); + free(buf); + return j; +} + +int +check_action(void) +{ + char buf[80] = ""; + + if(file_to_buf(ACTION_FILE, buf, sizeof(buf))){ + if(!strcmp(buf, "ACT_TFTP_UPGRADE")){ + cprintf("Upgrading from tftp now, quiet exit....\n"); + return ACT_TFTP_UPGRADE; + } + else if(!strcmp(buf, "ACT_WEBS_UPGRADE")){ + cprintf("Upgrading from web (https) now, quiet exit....\n"); + return ACT_WEBS_UPGRADE; + } + else if(!strcmp(buf, "ACT_WEB_UPGRADE")){ + cprintf("Upgrading from web (http) now, quiet exit....\n"); + return ACT_WEB_UPGRADE; + } + else if(!strcmp(buf, "ACT_SW_RESTORE")){ + cprintf("Receive restore command from web, quiet exit....\n"); + return ACT_SW_RESTORE; + } + else if(!strcmp(buf, "ACT_HW_RESTORE")){ + cprintf("Receive restore commond from resetbutton, quiet exit....\n"); + return ACT_HW_RESTORE; + } + } + //fprintf(stderr, "Waiting for upgrading....\n"); + return ACT_IDLE; +} + +int +file_to_buf(char *path, char *buf, int len) +{ + FILE *fp; + + memset(buf, 0 , len); + + if ((fp = fopen(path, "r"))) { + fgets(buf, len, fp); + fclose(fp); + return 1; + } + + return 0; +} diff --git a/openwrt/package/nvram/src/shutils.c b/openwrt/package/nvram/src/shutils.c new file mode 100644 index 0000000000..49ad41af81 --- /dev/null +++ b/openwrt/package/nvram/src/shutils.c @@ -0,0 +1,329 @@ +/* + * Shell-like utility functions + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +/* + * Reads file and returns contents + * @param fd file descriptor + * @return contents of file or NULL if an error occurred + */ +char * +fd2str(int fd) +{ + char *buf = NULL; + size_t count = 0, n; + + do { + buf = realloc(buf, count + 512); + n = read(fd, buf + count, 512); + if (n < 0) { + free(buf); + buf = NULL; + } + count += n; + } while (n == 512); + + close(fd); + if (buf) + buf[count] = '\0'; + return buf; +} + +/* + * Reads file and returns contents + * @param path path to file + * @return contents of file or NULL if an error occurred + */ +char * +file2str(const char *path) +{ + int fd; + + if ((fd = open(path, O_RDONLY)) == -1) { + perror(path); + return NULL; + } + + return fd2str(fd); +} + +/* + * Waits for a file descriptor to change status or unblocked signal + * @param fd file descriptor + * @param timeout seconds to wait before timing out or 0 for no timeout + * @return 1 if descriptor changed status or 0 if timed out or -1 on error + */ +int +waitfor(int fd, int timeout) +{ + fd_set rfds; + struct timeval tv = { timeout, 0 }; + + FD_ZERO(&rfds); + FD_SET(fd, &rfds); + return select(fd + 1, &rfds, NULL, NULL, (timeout > 0) ? &tv : NULL); +} + +/* + * Concatenates NULL-terminated list of arguments into a single + * commmand and executes it + * @param argv argument list + * @param path NULL, ">output", or ">>output" + * @param timeout seconds to wait before timing out or 0 for no timeout + * @param ppid NULL to wait for child termination or pointer to pid + * @return return value of executed command or errno + */ +int +_eval(char *const argv[], char *path, int timeout, int *ppid) +{ + pid_t pid; + int status; + int fd; + int flags; + int sig; + char buf[254]=""; + int i; + + switch (pid = fork()) { + case -1: /* error */ + perror("fork"); + return errno; + case 0: /* child */ + /* Reset signal handlers set for parent process */ + for (sig = 0; sig < (_NSIG-1); sig++) + signal(sig, SIG_DFL); + + /* Clean up */ + ioctl(0, TIOCNOTTY, 0); + close(STDIN_FILENO); + close(STDOUT_FILENO); + close(STDERR_FILENO); + setsid(); + + /* We want to check the board if exist UART? , add by honor 2003-12-04 */ + if ((fd = open("/dev/console", O_RDWR)) < 0) { + (void) open("/dev/null", O_RDONLY); + (void) open("/dev/null", O_WRONLY); + (void) open("/dev/null", O_WRONLY); + } + else{ + close(fd); + (void) open("/dev/console", O_RDONLY); + (void) open("/dev/console", O_WRONLY); + (void) open("/dev/console", O_WRONLY); + } + + /* Redirect stdout to */ + if (path) { + flags = O_WRONLY | O_CREAT; + if (!strncmp(path, ">>", 2)) { + /* append to */ + flags |= O_APPEND; + path += 2; + } else if (!strncmp(path, ">", 1)) { + /* overwrite */ + flags |= O_TRUNC; + path += 1; + } + if ((fd = open(path, flags, 0644)) < 0) + perror(path); + else { + dup2(fd, STDOUT_FILENO); + close(fd); + } + } + + /* execute command */ + for(i=0 ; argv[i] ; i++) + snprintf(buf+strlen(buf), sizeof(buf), "%s ", argv[i]); + dprintf("cmd=[%s]\n", buf); + setenv("PATH", "/sbin:/bin:/usr/sbin:/usr/bin", 1); + alarm(timeout); + execvp(argv[0], argv); + perror(argv[0]); + exit(errno); + default: /* parent */ + if (ppid) { + *ppid = pid; + return 0; + } else { + waitpid(pid, &status, 0); + if (WIFEXITED(status)) + return WEXITSTATUS(status); + else + return status; + } + } +} + +/* + * Concatenates NULL-terminated list of arguments into a single + * commmand and executes it + * @param argv argument list + * @return stdout of executed command or NULL if an error occurred + */ +char * +_backtick(char *const argv[]) +{ + int filedes[2]; + pid_t pid; + int status; + char *buf = NULL; + + /* create pipe */ + if (pipe(filedes) == -1) { + perror(argv[0]); + return NULL; + } + + switch (pid = fork()) { + case -1: /* error */ + return NULL; + case 0: /* child */ + close(filedes[0]); /* close read end of pipe */ + dup2(filedes[1], 1); /* redirect stdout to write end of pipe */ + close(filedes[1]); /* close write end of pipe */ + execvp(argv[0], argv); + exit(errno); + break; + default: /* parent */ + close(filedes[1]); /* close write end of pipe */ + buf = fd2str(filedes[0]); + waitpid(pid, &status, 0); + break; + } + + return buf; +} + +/* + * Kills process whose PID is stored in plaintext in pidfile + * @param pidfile PID file + * @return 0 on success and errno on failure + */ +int +kill_pidfile(char *pidfile) +{ + FILE *fp = fopen(pidfile, "r"); + char buf[256]; + + if (fp && fgets(buf, sizeof(buf), fp)) { + pid_t pid = strtoul(buf, NULL, 0); + fclose(fp); + return kill(pid, SIGTERM); + } else + return errno; +} + +/* + * fread() with automatic retry on syscall interrupt + * @param ptr location to store to + * @param size size of each element of data + * @param nmemb number of elements + * @param stream file stream + * @return number of items successfully read + */ +int +safe_fread(void *ptr, size_t size, size_t nmemb, FILE *stream) +{ + size_t ret = 0; + + do { + clearerr(stream); + ret += fread((char *)ptr + (ret * size), size, nmemb - ret, stream); + } while (ret < nmemb && ferror(stream) && errno == EINTR); + + return ret; +} + +/* + * fwrite() with automatic retry on syscall interrupt + * @param ptr location to read from + * @param size size of each element of data + * @param nmemb number of elements + * @param stream file stream + * @return number of items successfully written + */ +int +safe_fwrite(const void *ptr, size_t size, size_t nmemb, FILE *stream) +{ + size_t ret = 0; + + do { + clearerr(stream); + ret += fwrite((char *)ptr + (ret * size), size, nmemb - ret, stream); + } while (ret < nmemb && ferror(stream) && errno == EINTR); + + return ret; +} + +/* + * Convert Ethernet address string representation to binary data + * @param a string in xx:xx:xx:xx:xx:xx notation + * @param e binary data + * @return TRUE if conversion was successful and FALSE otherwise + */ +int +ether_atoe(const char *a, unsigned char *e) +{ + char *c = (char *) a; + int i = 0; + + memset(e, 0, ETHER_ADDR_LEN); + for (;;) { + e[i++] = (unsigned char) strtoul(c, &c, 16); + if (!*c++ || i == ETHER_ADDR_LEN) + break; + } + return (i == ETHER_ADDR_LEN); +} + +/* + * Convert Ethernet address binary data to string representation + * @param e binary data + * @param a string in xx:xx:xx:xx:xx:xx notation + * @return a + */ +char * +ether_etoa(const unsigned char *e, char *a) +{ + char *c = a; + int i; + + for (i = 0; i < ETHER_ADDR_LEN; i++) { + if (i) + *c++ = ':'; + c += sprintf(c, "%02X", e[i] & 0xff); + } + return a; +} diff --git a/openwrt/package/nvram/src/wl.c b/openwrt/package/nvram/src/wl.c new file mode 100644 index 0000000000..f09317ad06 --- /dev/null +++ b/openwrt/package/nvram/src/wl.c @@ -0,0 +1,86 @@ +/* + * Wireless network adapter utilities + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ +#include + +#include +#include + +int +wl_probe(char *name) +{ + int ret, val; + + /* Check interface */ + if ((ret = wl_ioctl(name, WLC_GET_MAGIC, &val, sizeof(val)))) + return ret; + if (val != WLC_IOCTL_MAGIC) + return -1; + if ((ret = wl_ioctl(name, WLC_GET_VERSION, &val, sizeof(val)))) + return ret; + if (val > WLC_IOCTL_VERSION) + return -1; + + return ret; +} + +int +wl_set_val(char *name, char *var, void *val, int len) +{ + char buf[128]; + int buf_len; + + /* check for overflow */ + if ((buf_len = strlen(var)) + 1 + len > sizeof(buf)) + return -1; + + strcpy(buf, var); + buf_len += 1; + + /* append int value onto the end of the name string */ + memcpy(&buf[buf_len], val, len); + buf_len += len; + + return wl_ioctl(name, WLC_SET_VAR, buf, buf_len); +} + +int +wl_get_val(char *name, char *var, void *val, int len) +{ + char buf[128]; + int ret; + + /* check for overflow */ + if (strlen(var) + 1 > sizeof(buf) || len > sizeof(buf)) + return -1; + + strcpy(buf, var); + if ((ret = wl_ioctl(name, WLC_GET_VAR, buf, sizeof(buf)))) + return ret; + + memcpy(val, buf, len); + return 0; +} + +int +wl_set_int(char *name, char *var, int val) +{ + return wl_set_val(name, var, &val, sizeof(val)); +} + +int +wl_get_int(char *name, char *var, int *val) +{ + return wl_get_val(name, var, val, sizeof(*val)); +} + diff --git a/openwrt/package/nvram/src/wl_linux.c b/openwrt/package/nvram/src/wl_linux.c new file mode 100644 index 0000000000..126a40b4b3 --- /dev/null +++ b/openwrt/package/nvram/src/wl_linux.c @@ -0,0 +1,77 @@ +/* + * Wireless network adapter utilities (linux-specific) + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +int +wl_ioctl(char *name, int cmd, void *buf, int len) +{ + struct ifreq ifr; + wl_ioctl_t ioc; + int ret = 0; + int s; + + /* open socket to kernel */ + if ((s = socket(AF_INET, SOCK_DGRAM, 0)) < 0) { + perror("socket"); + return errno; + } + + /* do it */ + ioc.cmd = cmd; + ioc.buf = buf; + ioc.len = len; + strncpy(ifr.ifr_name, name, IFNAMSIZ); + ifr.ifr_data = (caddr_t) &ioc; + if ((ret = ioctl(s, SIOCDEVPRIVATE, &ifr)) < 0) + if (cmd != WLC_GET_MAGIC) + perror(ifr.ifr_name); + + /* cleanup */ + close(s); + return ret; +} + +int +wl_hwaddr(char *name, unsigned char *hwaddr) +{ + struct ifreq ifr; + int ret = 0; + int s; + + /* open socket to kernel */ + if ((s = socket(AF_INET, SOCK_DGRAM, 0)) < 0) { + perror("socket"); + return errno; + } + + /* do it */ + strncpy(ifr.ifr_name, name, IFNAMSIZ); + if ((ret = ioctl(s, SIOCGIFHWADDR, &ifr)) == 0) + memcpy(hwaddr, ifr.ifr_hwaddr.sa_data, ETHER_ADDR_LEN); + + /* cleanup */ + close(s); + return ret; +} + diff --git a/openwrt/package/rules.mk b/openwrt/package/rules.mk index a95c4e421b..f7b81c62af 100644 --- a/openwrt/package/rules.mk +++ b/openwrt/package/rules.mk @@ -1,3 +1,7 @@ +# invoke ipkg with configuration in $(STAGING_DIR)/etc/ipkg.conf +IPKG := IPKG_INSTROOT=$(TARGET_DIR) IPKG_CONF_DIR=$(IPKG_CONF) $(SCRIPT_DIR)/ipkg -force-defaults -force-depends +IPKG_STATE_DIR := $(TARGET_DIR)/usr/lib/ipkg + define PKG_template IPKG_$(1):=$(PACKAGE_DIR)/$(2)_$(3)_$(4).ipk IDIR_$(1):=$(PKG_BUILD_DIR)/ipkg/$(2) diff --git a/openwrt/package/ser/Makefile b/openwrt/package/ser/Makefile index 81cb347dcc..603d4bceed 100644 --- a/openwrt/package/ser/Makefile +++ b/openwrt/package/ser/Makefile @@ -11,55 +11,36 @@ PKG_SOURCE_URL:=ftp://ftp.berlios.de/pub/ser/$(PKG_VERSION)/src PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_src.tar.gz PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION) PKG_CAT:=zcat -PKG_IPK:=$(PACKAGE_DIR)/$(PKG_NAME)_$(PKG_VERSION)-$(PKG_RELEASE)_$(ARCH).ipk -PKG_IPK_DIR:=$(PKG_BUILD_DIR)/ipkg + +include $(TOPDIR)/package/rules.mk + +$(eval $(call PKG_template,SER,ser,$(PKG_VERSION)-$(PKG_RELEASE),$(ARCH))) SER_MODULES := sl tm rr maxfwd usrloc registrar dbtext textops nathelper SER_MODULE_FILES := $(foreach module,$(SER_MODULES),modules/$(module)/$(module).so) SER_MODULES := $(patsubst %,modules/%,$(SER_MODULES)) -$(DL_DIR)/$(PKG_SOURCE): - $(SCRIPT_DIR)/download.pl $(DL_DIR) $(PKG_SOURCE) $(PKG_MD5SUM) $(PKG_SOURCE_URL) - -$(PKG_BUILD_DIR)/.patched: $(DL_DIR)/$(PKG_SOURCE) - $(PKG_CAT) $(DL_DIR)/$(PKG_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) - - $(PATCH) $(PKG_BUILD_DIR) ./patches - touch $(PKG_BUILD_DIR)/.patched - -$(PKG_BUILD_DIR)/$(PKG_NAME): $(PKG_BUILD_DIR)/.patched +$(PKG_BUILD_DIR)/.built: $(MAKE) -C $(PKG_BUILD_DIR) \ extra_defs="-DUSE_PTHREAD_MUTEX " \ CC="$(TARGET_CC)" \ ARCH="$(ARCH)" \ CFLAGS="$(TARGET_CFLAGS)" \ modules all - -$(PKG_IPK): $(PKG_BUILD_DIR)/$(PKG_NAME) - $(SCRIPT_DIR)/make-ipkg-dir.sh $(PKG_IPK_DIR) $(PKG_NAME).control $(PKG_VERSION)-$(PKG_RELEASE) $(ARCH) - mkdir -p $(PKG_IPK_DIR)/usr/sbin - cp -a $(PKG_BUILD_DIR)/$(PKG_NAME) $(PKG_IPK_DIR)/usr/sbin/ - -$(STRIP) $(PKG_IPK_DIR)/usr/sbin/* - cp -a $(PKG_BUILD_DIR)/scripts/sc $(PKG_IPK_DIR)/usr/sbin/serctl - mkdir -p $(PKG_IPK_DIR)/usr/lib/ser/modules + touch $@ + +$(IPKG_SER): + mkdir -p $(IDIR_SER)/usr/sbin + cp -a $(PKG_BUILD_DIR)/$(PKG_NAME) $(IDIR_SER)/usr/sbin/ + -$(STRIP) $(IDIR_SER)/usr/sbin/* + cp -a $(PKG_BUILD_DIR)/scripts/sc $(IDIR_SER)/usr/sbin/serctl + mkdir -p $(IDIR_SER)/usr/lib/ser/modules (cd $(PKG_BUILD_DIR);\ - cp -a $(SER_MODULE_FILES) $(PKG_IPK_DIR)/usr/lib/ser/modules/; \ + cp -a $(SER_MODULE_FILES) $(IDIR_SER)/usr/lib/ser/modules/; \ ) - $(STRIP) $(PKG_IPK_DIR)/usr/lib/ser/modules/* - mkdir -p $(PKG_IPK_DIR)/etc/ser - cp -a $(PKG_BUILD_DIR)/etc/ser.cfg $(PKG_IPK_DIR)/etc/ser/ - mkdir -p $(PACKAGE_DIR) - $(IPKG_BUILD) $(PKG_IPK_DIR) $(PACKAGE_DIR) - -$(IPKG_STATE_DIR)/info/$(PKG_NAME).list: $(PKG_IPK) - $(IPKG) install $(PKG_IPK) - -source: $(DL_DIR)/$(PKG_SOURCE) -prepare: $(PKG_BUILD_DIR)/.patched -compile: $(PKG_IPK) -install: $(IPKG_STATE_DIR)/info/$(PKG_NAME).list - + $(STRIP) $(IDIR_SER)/usr/lib/ser/modules/* + mkdir -p $(IDIR_SER)/etc/ser + cp -a $(PKG_BUILD_DIR)/etc/ser.cfg $(IDIR_SER)/etc/ser/ + $(IPKG_BUILD) $(IDIR_SER) $(PACKAGE_DIR) -clean: - rm -rf $(PKG_BUILD_DIR) - rm -f $(PKG_IPK) diff --git a/openwrt/package/ser/ipkg/ser.control b/openwrt/package/ser/ipkg/ser.control new file mode 100644 index 0000000000..303bc05484 --- /dev/null +++ b/openwrt/package/ser/ipkg/ser.control @@ -0,0 +1,8 @@ +Package: ser +Priority: optional +Section: net +Maintainer: Felix Fietkau +Source: buildroot internal +Description: SIP Express Router + SIP Express Router (ser) is a high-performance, + configurable, free SIP server. diff --git a/openwrt/package/ser/ser.control b/openwrt/package/ser/ser.control deleted file mode 100644 index 303bc05484..0000000000 --- a/openwrt/package/ser/ser.control +++ /dev/null @@ -1,8 +0,0 @@ -Package: ser -Priority: optional -Section: net -Maintainer: Felix Fietkau -Source: buildroot internal -Description: SIP Express Router - SIP Express Router (ser) is a high-performance, - configurable, free SIP server. diff --git a/openwrt/package/wificonf/Config.in b/openwrt/package/wificonf/Config.in new file mode 100644 index 0000000000..c346f5fd36 --- /dev/null +++ b/openwrt/package/wificonf/Config.in @@ -0,0 +1,5 @@ +config BR2_PACKAGE_WIFICONF + tristate "wificonf - replacement utility for wlconf" + default y + help + Replacement utility for wlconf diff --git a/openwrt/package/wificonf/Makefile b/openwrt/package/wificonf/Makefile new file mode 100644 index 0000000000..ed41e416c8 --- /dev/null +++ b/openwrt/package/wificonf/Makefile @@ -0,0 +1,30 @@ +# $Id$ + +include $(TOPDIR)/rules.mk + +PKG_NAME:=wificonf +PKG_RELEASE:=1 + +PKG_BUILD_DIR:=$(BUILD_DIR)/wificonf + +include $(TOPDIR)/package/rules.mk + +ifneq ($(BOARD),brcm) +BR2_PACKAGE_WIFICONF:=m +endif + +$(eval $(call PKG_template,WIFICONF,$(PKG_NAME),$(PKG_RELEASE),$(ARCH))) + +$(PKG_BUILD_DIR)/.prepared: + mkdir -p $@ + touch $@ + +$(PKG_BUILD_DIR)/.built: + $(TARGET_CC) $(TARGET_CFLAGS) -I$(STAGING_DIR)/usr/include -o $(PKG_BUILD_DIR)/wifi wificonf.c -L$(STAGING_DIR)/usr/lib -lnvram -lshared $(STAGING_DIR)/usr/lib/libiw.so + touch $@ + +$(IPKG_WIFICONF): + install -d -m0755 $(IDIR_WIFICONF)/sbin + install -m0755 $(PKG_BUILD_DIR)/wifi $(IDIR_WIFICONF)/sbin/ + $(RSTRIP) $(IDIR_WIFICONF) + $(IPKG_BUILD) $(IDIR_WIFICONF) $(PACKAGE_DIR) diff --git a/openwrt/package/wificonf/ipkg/wificonf.control b/openwrt/package/wificonf/ipkg/wificonf.control new file mode 100644 index 0000000000..78e8097c4a --- /dev/null +++ b/openwrt/package/wificonf/ipkg/wificonf.control @@ -0,0 +1,6 @@ +Package: wificonf +Priority: optional +Section: net +Maintainer: Felix Fietkau +Source: buildroot internal +Description: Replacement utility for wlconf diff --git a/openwrt/package/wificonf/wificonf.c b/openwrt/package/wificonf/wificonf.c new file mode 100644 index 0000000000..24a9c2fe11 --- /dev/null +++ b/openwrt/package/wificonf/wificonf.c @@ -0,0 +1,495 @@ +/* + * Wireless Network Adapter configuration utility + * + * Copyright (C) 2005 Felix Fietkau + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include + +/*------------------------------------------------------------------*/ +/* + * Macro to handle errors when setting WE + * Print a nice error message and exit... + * We define them as macro so that "return" do the right thing. + * The "do {...} while(0)" is a standard trick + */ +#define ERR_SET_EXT(rname, request) \ + fprintf(stderr, "Error for wireless request \"%s\" (%X) :\n", \ + rname, request) + +#define ABORT_ARG_NUM(rname, request) \ + do { \ + ERR_SET_EXT(rname, request); \ + fprintf(stderr, " too few arguments.\n"); \ + } while(0) + +#define ABORT_ARG_TYPE(rname, request, arg) \ + do { \ + ERR_SET_EXT(rname, request); \ + fprintf(stderr, " invalid argument \"%s\".\n", arg); \ + } while(0) + +#define ABORT_ARG_SIZE(rname, request, max) \ + do { \ + ERR_SET_EXT(rname, request); \ + fprintf(stderr, " argument too big (max %d)\n", max); \ + } while(0) + +/*------------------------------------------------------------------*/ +/* + * Wrapper to push some Wireless Parameter in the driver + * Use standard wrapper and add pretty error message if fail... + */ +#define IW_SET_EXT_ERR(skfd, ifname, request, wrq, rname) \ + do { \ + if(iw_set_ext(skfd, ifname, request, wrq) < 0) { \ + ERR_SET_EXT(rname, request); \ + fprintf(stderr, " SET failed on device %-1.16s ; %s.\n", \ + ifname, strerror(errno)); \ + } } while(0) + +/*------------------------------------------------------------------*/ +/* + * Wrapper to extract some Wireless Parameter out of the driver + * Use standard wrapper and add pretty error message if fail... + */ +#define IW_GET_EXT_ERR(skfd, ifname, request, wrq, rname) \ + do { \ + if(iw_get_ext(skfd, ifname, request, wrq) < 0) { \ + ERR_SET_EXT(rname, request); \ + fprintf(stderr, " GET failed on device %-1.16s ; %s.\n", \ + ifname, strerror(errno)); \ + } } while(0) + +void set_wext_ssid(int skfd, char *ifname); + +char *prefix; +char buffer[128]; + +char *wl_var(char *name) +{ + strcpy(buffer, prefix); + strcat(buffer, name); +} + +int nvram_enabled(char *name) +{ + return (nvram_match(name, "1") || nvram_match(name, "on") || nvram_match(name, "enabled") || nvram_match(name, "true") || nvram_match(name, "yes") ? 1 : 0); +} + +int nvram_disabled(char *name) +{ + return (nvram_match(name, "0") || nvram_match(name, "off") || nvram_match(name, "disabled") || nvram_match(name, "false") || nvram_match(name, "no") ? 1 : 0); +} + + +int bcom_ioctl(int skfd, char *ifname, int cmd, void *buf, int len) +{ + struct ifreq ifr; + wl_ioctl_t ioc; + int ret; + + ioc.cmd = cmd; + ioc.buf = buf; + ioc.len = len; + + ifr.ifr_data = (caddr_t) &ioc; + strncpy(ifr.ifr_name, ifname, IFNAMSIZ); + + ret = ioctl(skfd, SIOCDEVPRIVATE, &ifr); + + return ret; +} + +int bcom_set_val(int skfd, char *ifname, char *var, void *val, int len) +{ + char buf[8192]; + int ret; + + if (strlen(var) + 1 > sizeof(buf) || len > sizeof(buf)) + return -1; + + strcpy(buf, var); + + if ((ret = bcom_ioctl(skfd, ifname, WLC_GET_VAR, buf, sizeof(buf)))) + return ret; + + memcpy(val, buf, len); + return 0; +} + +int bcom_set_int(int skfd, char *ifname, char *var, int val) +{ + return bcom_set_val(skfd, ifname, var, &val, sizeof(val)); +} + +void stop_bcom(int skfd, char *ifname) +{ + int val = 0; + wlc_ssid_t ssid; + + if (bcom_ioctl(skfd, ifname, WLC_GET_MAGIC, &val, sizeof(val)) < 0) + return; + + ssid.SSID_len = 0; + ssid.SSID[0] = 0; + bcom_ioctl(skfd, ifname, WLC_SET_SSID, &ssid, sizeof(ssid)); + bcom_ioctl(skfd, ifname, WLC_DOWN, NULL, 0); + +} + +void start_bcom(int skfd, char *ifname) +{ + int val = 0; + + if (bcom_ioctl(skfd, ifname, WLC_GET_MAGIC, &val, sizeof(val)) < 0) + return; + + bcom_ioctl(skfd, ifname, WLC_UP, &val, sizeof(val)); + set_wext_ssid(skfd, ifname); +} + + +void setup_bcom(int skfd, char *ifname) +{ + int val = 0; + char buf[8192]; + char wbuf[80]; + char *v; + + if (bcom_ioctl(skfd, ifname, WLC_GET_MAGIC, &val, sizeof(val)) < 0) + return; + + stop_bcom(skfd, ifname); + + /* Set Country */ + strncpy(buf, nvram_safe_get(wl_var("country_code")), 4); + buf[3] = 0; + bcom_ioctl(skfd, ifname, 273, buf, 4); + + /* Set up afterburner */ + val = ABO_AUTO; + if (nvram_enabled(wl_var("afterburner"))) + val = ABO_ON; + if (nvram_disabled(wl_var("afterburner"))) + val = ABO_OFF; + bcom_set_val(skfd, ifname, "afterburner_override", &val, sizeof(val)); + + /* Set other options */ + if (v = nvram_get(wl_var("lazywds"))) { + val = atoi(v); + bcom_ioctl(skfd, ifname, WLC_SET_LAZYWDS, &val, sizeof(val)); + } + if (v = nvram_get(wl_var("frag"))) { + val = atoi(v); + bcom_ioctl(skfd, ifname, WLC_SET_FRAG, &val, sizeof(val)); + } + if (v = nvram_get(wl_var("dtim"))) { + val = atoi(v); + bcom_ioctl(skfd, ifname, WLC_SET_DTIMPRD, &val, sizeof(val)); + } + if (v = nvram_get(wl_var("bcn"))) { + val = atoi(v); + bcom_ioctl(skfd, ifname, WLC_SET_BCNPRD, &val, sizeof(val)); + } + if (v = nvram_get(wl_var("rts"))) { + val = atoi(v); + bcom_ioctl(skfd, ifname, WLC_SET_RTS, &val, sizeof(val)); + } + if (v = nvram_get(wl_var("antdiv"))) { + val = atoi(v); + bcom_ioctl(skfd, ifname, WLC_SET_ANTDIV, &val, sizeof(val)); + } + if (v = nvram_get(wl_var("txant"))) { + val = atoi(v); + bcom_ioctl(skfd, ifname, WLC_SET_TXANT, &val, sizeof(val)); + } + + val = nvram_enabled(wl_var("closed")); + bcom_ioctl(skfd, ifname, WLC_SET_CLOSED, &val, sizeof(val)); + + val = nvram_enabled(wl_var("ap_isolate")); + bcom_set_int(skfd, ifname, "ap_isolate", val); + + val = nvram_enabled(wl_var("frameburst")); + bcom_ioctl(skfd, ifname, WLC_SET_FAKEFRAG, &val, sizeof(val)); + + /* Set up MAC list */ + if (nvram_match(wl_var("macmode"), "allow")) + val = WLC_MACMODE_ALLOW; + else if (nvram_match(wl_var("macmode"), "deny")) + val = WLC_MACMODE_DENY; + else + val = WLC_MACMODE_DISABLED; + + if ((val != WLC_MACMODE_DISABLED) && (v = nvram_get(wl_var("maclist")))) { + struct maclist *mac_list; + struct ether_addr *addr; + char *next; + + memset(buf, 0, 8192); + mac_list = (struct maclist *) buf; + addr = mac_list->ea; + + foreach(wbuf, v, next) { + if (ether_atoe(wbuf, addr->ether_addr_octet)) { + mac_list->count++; + addr++; + } + } + bcom_ioctl(skfd, ifname, WLC_SET_MACLIST, buf, sizeof(buf)); + } else { + val = WLC_MACMODE_DISABLED; + } + bcom_ioctl(skfd, ifname, WLC_SET_MACMODE, &val, sizeof(val)); + + if (v = nvram_get(wl_var("wds"))) { + struct maclist *wdslist = (struct maclist *) buf; + struct ether_addr *addr = wdslist->ea; + char *next; + + memset(buf, 0, 8192); + foreach(wbuf, v, next) { + if (ether_atoe(wbuf, addr->ether_addr_octet)) { + wdslist->count++; + addr++; + } + } + bcom_ioctl(skfd, ifname, WLC_SET_WDSLIST, buf, sizeof(buf)); + } + + /* Set up G mode */ + bcom_ioctl(skfd, ifname, WLC_GET_PHYTYPE, &val, sizeof(val)); + if (val == 2) { + int override = WLC_G_PROTECTION_OFF; + int control = WLC_G_PROTECTION_CTL_OFF; + + if (v = nvram_get(wl_var("gmode"))) + val = atoi(v); + else + val = 1; + + if (val > 5) + val = 1; + + bcom_ioctl(skfd, ifname, WLC_SET_GMODE, &val, sizeof(val)); + + if (nvram_match(wl_var("gmode_protection"), "auto")) { + override = WLC_G_PROTECTION_AUTO; + control = WLC_G_PROTECTION_CTL_OVERLAP; + } + if (nvram_enabled(wl_var("gmode_protection"))) { + override = WLC_G_PROTECTION_ON; + control = WLC_G_PROTECTION_CTL_OVERLAP; + } + bcom_ioctl(skfd, ifname, WLC_SET_GMODE_PROTECTION_CONTROL, &override, sizeof(control)); + bcom_ioctl(skfd, ifname, WLC_SET_GMODE_PROTECTION_OVERRIDE, &override, sizeof(override)); + + if (val = 0) { + if (nvram_match(wl_var("plcphdr"), "long")) + val = WLC_PLCP_AUTO; + else + val = WLC_PLCP_SHORT; + + bcom_ioctl(skfd, ifname, WLC_SET_PLCPHDR, &val, sizeof(val)); + } + } + + start_bcom(skfd, ifname); + + if (!(v = nvram_get(wl_var("akm")))) + v = nvram_safe_get(wl_var("auth_mode")); + + if (strstr(v, "wpa") || strstr(v, "psk")) { + /* Set up WPA */ + if (nvram_match(wl_var("crypto"), "tkip")) + val = TKIP_ENABLED; + else if (nvram_match(wl_var("crypto"), "aes")) + val = AES_ENABLED; + else if (nvram_match(wl_var("crypto"), "tkip+aes")) + val = TKIP_ENABLED | AES_ENABLED; + else + val = 0; + bcom_ioctl(skfd, ifname, WLC_SET_WSEC, &val, sizeof(val)); + + if (val && strstr(v, "psk")) { + v = nvram_safe_get(wl_var("wpa_psk")); + + if ((strlen(v) >= 8) && (strlen(v) < 63)) { + val = 4; + bcom_ioctl(skfd, ifname, WLC_SET_WPA_AUTH, &val, sizeof(val)); + + bcom_ioctl(skfd, ifname, WLC_GET_AP, &val, sizeof(val)); + if (!val) { + /* Enable in-driver WPA supplicant */ + wsec_pmk_t pmk; + + pmk.key_len = (unsigned short) strlen(v); + pmk.flags = WSEC_PASSPHRASE; + strcpy(pmk.key, v); + bcom_ioctl(skfd, ifname, WLC_SET_WSEC_PMK, &pmk, sizeof(pmk)); + bcom_set_int(skfd, ifname, "sup_wpa", 1); + } + } + } else { + val = 1; + bcom_ioctl(skfd, ifname, WLC_SET_EAP_RESTRICT, &val, sizeof(val)); + } + } else { + val = 0; + + bcom_ioctl(skfd, ifname, WLC_SET_WSEC, &val, sizeof(val)); + bcom_ioctl(skfd, ifname, WLC_SET_WPA_AUTH, &val, sizeof(val)); + } + + +} + +void set_wext_ssid(int skfd, char *ifname) +{ + char *buffer; + struct iwreq wrq; + + if (buffer = nvram_get(wl_var("ssid"))) { + if (strlen(buffer) > IW_ESSID_MAX_SIZE) { + ABORT_ARG_SIZE("Set ESSID", SIOCSIWESSID, IW_ESSID_MAX_SIZE); + } else { + char essid[IW_ESSID_MAX_SIZE + 1]; + + wrq.u.essid.flags = 1; + strcpy(essid, buffer); + wrq.u.essid.pointer = (caddr_t) essid; + wrq.u.essid.length = strlen(essid) + 1; + IW_SET_EXT_ERR(skfd, ifname, SIOCSIWESSID, &wrq, "Set ESSID"); + } + } +} +void setup_wext_wep(int skfd, char *ifname) +{ + int i, keylen; + struct iwreq wrq; + char keystr[5]; + char *keyval; + unsigned char key[IW_ENCODING_TOKEN_MAX]; + + strcpy(keystr, "key1"); + for (i = 1; i <= 4; i++) { + if (keyval = nvram_get(wl_var(keystr))) { + keylen = iw_in_key(keyval, key); + + if (keylen > 0) { + wrq.u.data.length = keylen; + wrq.u.data.pointer = (caddr_t) key; + wrq.u.data.flags = i; + IW_SET_EXT_ERR(skfd, ifname, SIOCSIWENCODE, &wrq, "Set Encode"); + } + } + keystr[3]++; + } + + + i = atoi(nvram_safe_get(wl_var("key"))); + if (i > 0 && i < 4) { + wrq.u.data.flags = i | IW_ENCODE_RESTRICTED; + IW_SET_EXT_ERR(skfd, ifname, SIOCSIWENCODE, &wrq, "Set Encode"); + } +} + +void set_wext_mode(skfd, ifname) +{ + struct iwreq wrq; + int ap = 0, infra = 0, wet = 0; + + /* Set operation mode */ + ap = !nvram_match(wl_var("mode"), "sta"); + infra = !nvram_disabled(wl_var("infra")); + wet = nvram_enabled(wl_var("wet")); + + wrq.u.mode = (!infra ? IW_MODE_ADHOC : (ap ? IW_MODE_MASTER : (wet ? IW_MODE_REPEAT : IW_MODE_INFRA))); + IW_SET_EXT_ERR(skfd, ifname, SIOCSIWMODE, &wrq, "Set Mode"); +} + +void setup_wext(int skfd, char *ifname) +{ + char *buffer; + struct iwreq wrq; + + /* Set channel */ + int channel = atoi(nvram_safe_get(wl_var("channel"))); + + wrq.u.freq.m = -1; + wrq.u.freq.e = 0; + wrq.u.freq.flags = 0; + + if (channel > 0) { + wrq.u.freq.flags = IW_FREQ_FIXED; + wrq.u.freq.m = channel; + IW_SET_EXT_ERR(skfd, ifname, SIOCSIWFREQ, &wrq, "Set Frequency"); + } + + + /* Disable radio if wlX_radio is set and not enabled */ + wrq.u.txpower.disabled = nvram_disabled(wl_var("radio")); + + wrq.u.txpower.value = -1; + wrq.u.txpower.fixed = 1; + wrq.u.txpower.flags = IW_TXPOW_DBM; + IW_SET_EXT_ERR(skfd, ifname, SIOCSIWTXPOW, &wrq, "Set Tx Power"); + + /* Set up WEP */ + if (nvram_enabled(wl_var("wep"))) + setup_wext_wep(skfd, ifname); + + /* Set ESSID */ + set_wext_ssid(skfd, ifname); + +} + + +static int setup_interfaces(int skfd, char *ifname, char *args[], int count) +{ + struct iwreq wrq; + int rc; + + /* Avoid "Unused parameter" warning */ + args = args; count = count; + + if(iw_get_ext(skfd, ifname, SIOCGIWNAME, &wrq) < 0) + return 0; + + stop_bcom(skfd, ifname); + set_wext_mode(skfd, ifname); + setup_bcom(skfd, ifname); + setup_wext(skfd, ifname); + + prefix[2]++; +} + +int main(int argc, char **argv) +{ + int skfd; + if((skfd = iw_sockets_open()) < 0) { + perror("socket"); + exit(-1); + } + + prefix = strdup("wl0_"); + iw_enum_devices(skfd, &setup_interfaces, NULL, 0); + + return 0; +} diff --git a/openwrt/rules.mk b/openwrt/rules.mk index e69654e0e1..57544ee5bf 100644 --- a/openwrt/rules.mk +++ b/openwrt/rules.mk @@ -52,7 +52,6 @@ SCRIPT_DIR:=$(BASE_DIR)/scripts BIN_DIR:=$(BASE_DIR)/bin STAMP_DIR:=$(BUILD_DIR)/stamp PACKAGE_DIR:=$(BIN_DIR)/packages -TARGET_DIR:=$(BUILD_DIR)/root STAMP_DIR:=$(BUILD_DIR)/stamp TOOL_BUILD_DIR=$(BASE_DIR)/toolchain_build_$(ARCH)$(ARCH_FPU_SUFFIX) # Strip off the annoying quoting @@ -106,11 +105,6 @@ ifeq ($(BR2_ENABLE_MULTILIB),y) MULTILIB:=--enable-multilib endif - -# invoke ipkg with configuration in $(STAGING_DIR)/etc/ipkg.conf -IPKG := IPKG_INSTROOT=$(TARGET_DIR) IPKG_CONF_DIR=$(STAGING_DIR)/etc $(SCRIPT_DIR)/ipkg -force-defaults -force-depends -IPKG_STATE_DIR := $(TARGET_DIR)/usr/lib/ipkg - # invoke ipkg-build with some default options IPKG_BUILD := PATH="$(TARGET_PATH)" ipkg-build -c -o root -g root diff --git a/openwrt/target/linux/linux-2.4/Makefile b/openwrt/target/linux/linux-2.4/Makefile index defa97824d..8305f9c263 100644 --- a/openwrt/target/linux/linux-2.4/Makefile +++ b/openwrt/target/linux/linux-2.4/Makefile @@ -13,11 +13,6 @@ include $(TOPDIR)/rules.mk include ../rules.mk -# for testing -ifeq ($(BOARD),) -BOARD:=brcm -endif - LINUX_VERSION:=2.4.30 MODULES_SUBDIR:=lib/modules/$(LINUX_VERSION) LINUX_KCONFIG:=./config/$(BOARD) @@ -43,7 +38,7 @@ PKG_RELEASE := 2 KERNEL_IPKG:=$(LINUX_BUILD_DIR)/kernel-$(LINUX_VERSION)-$(BOARD)_$(PKG_RELEASE)_$(ARCH).ipk KERNEL_IDIR:=$(LINUX_BUILD_DIR)/kernel-ipkg -PKG_MAKEOPTS:= IPKG="$(IPKG_KERNEL)" \ +KPKG_MAKEOPTS:= IPKG="$(IPKG_KERNEL)" \ BOARD="$(BOARD)" \ TARGET_DIR="$(LINUX_TARGET_DIR)" \ BUILD_DIR="$(LINUX_BUILD_DIR)" \ @@ -238,20 +233,25 @@ prepare: $(LINUX_DIR)/.configured compile: $(LINUX_DIR)/.modules_done $(TARGETS) ln -sf $(LINUX_BUILD_DIR)/linux-$(LINUX_VERSION) $(LINUX_DIR) $(MAKE) -C $(TOPDIR)/target/linux/package \ - $(PKG_MAKEOPTS) \ + $(KPKG_MAKEOPTS) \ compile install: compile $(TARGET_MODULES_DIR) $(KERNEL_IPKG) rm -rf $(LINUX_BUILD_DIR)/root* - cp -a $(BUILD_DIR)/root $(LINUX_BUILD_DIR)/ echo -e 'dest root /\noption offline_root $(LINUX_BUILD_DIR)/root' > $(LINUX_BUILD_DIR)/ipkg.conf [ "$(INSTALL_TARGETS)" != "" ] && $(IPKG_KERNEL) install $(INSTALL_TARGETS) || true + $(MAKE) -C $(TOPDIR)/package \ + TARGET_DIR="$(LINUX_TARGET_DIR)" \ + IPKG_CONF="$(LINUX_BUILD_DIR)" \ + BOARD="$(BOARD)" \ + install $(MAKE) -C $(TOPDIR)/target/linux/package \ - $(PKG_MAKEOPTS) \ + $(KPKG_MAKEOPTS) \ install mostlyclean: - rm -f $(LINUX_BUILD_DIR)/linux-$(LINUX_VERSION)/.{drivers-unpacked,modules_done} + rm -f $(LINUX_BUILD_DIR)/linux-$(LINUX_VERSION)/.modules_done + rm -f $(LINUX_BUILD_DIR)/linux-$(LINUX_VERSION)/.drivers-unpacked $(MAKE) -C $(LINUX_BUILD_DIR)/linux-$(LINUX_VERSION) clean rm -f $(LINUX_KERNEL) $(LINUX_IMAGE) diff --git a/openwrt/target/linux/package/Makefile b/openwrt/target/linux/package/Makefile index 84402cce2e..43fbd60f22 100644 --- a/openwrt/target/linux/package/Makefile +++ b/openwrt/target/linux/package/Makefile @@ -8,14 +8,10 @@ package-$(BR2_PACKAGE_KMOD_OPENSWAN) += openswan package-y += openwrt ifeq ($(BOARD),brcm) -package-$(BR2_PACKAGE_WIFICONF) += wificonf -package-y += nvram - ifeq ($(LINUX_VERSION),2.4.30) package-$(BR2_PACKAGE_KMOD_WLCOMPAT) += wlcompat +wlcompat-compile: openwrt-compile endif - -nvram-compile: openwrt-compile endif all: compile install diff --git a/openwrt/target/linux/package/nvram/Makefile b/openwrt/target/linux/package/nvram/Makefile deleted file mode 100644 index 3e5263b34a..0000000000 --- a/openwrt/target/linux/package/nvram/Makefile +++ /dev/null @@ -1,40 +0,0 @@ -# $Id$ - -include $(TOPDIR)/rules.mk - -PKG_NAME:=nvram -PKG_RELEASE:=1 - -PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME) - -include $(TOPDIR)/package/rules.mk - -BR2_PACKAGE_NVRAM:=y # does not depend on menuconfig -$(eval $(call PKG_template,NVRAM,nvram,$(PKG_RELEASE),$(ARCH))) - -$(PKG_BUILD_DIR)/.prepared: - mkdir -p $(PKG_BUILD_DIR) - cp -a ./src/* $(PKG_BUILD_DIR) - touch $@ - -$(PKG_BUILD_DIR)/.built: - $(MAKE) -C $(PKG_BUILD_DIR) \ - $(TARGET_CONFIGURE_OPTS) \ - CFLAGS="$(TARGET_CFLAGS) -I $(STAGING_DIR)/usr/include" - touch $@ - -$(IPKG_NVRAM): - mkdir -p $(IDIR_NVRAM)/usr/lib - cp $(PKG_BUILD_DIR)/*.so $(IDIR_NVRAM)/usr/lib - mkdir -p $(IDIR_NVRAM)/usr/sbin - cp $(PKG_BUILD_DIR)/nvram $(IDIR_NVRAM)/usr/sbin - $(RSTRIP) $(IDIR_NVRAM) - $(IPKG_BUILD) $(IDIR_NVRAM) $(PACKAGE_DIR) - - -compile: install-dev -install-dev: - mkdir -p $(STAGING_DIR)/usr/lib - cp $(PKG_BUILD_DIR)/*.so $(STAGING_DIR)/usr/lib - - diff --git a/openwrt/target/linux/package/nvram/ipkg/nvram.control b/openwrt/target/linux/package/nvram/ipkg/nvram.control deleted file mode 100644 index bb25813030..0000000000 --- a/openwrt/target/linux/package/nvram/ipkg/nvram.control +++ /dev/null @@ -1,7 +0,0 @@ -Package: nvram -Priority: optional -Section: sys -Maintainer: Felix Fietkau -Source: buildroot internal -Description: NVRAM utility and libraries for Broadcom hardware - diff --git a/openwrt/target/linux/package/nvram/src/Makefile b/openwrt/target/linux/package/nvram/src/Makefile deleted file mode 100644 index 376c2b7de7..0000000000 --- a/openwrt/target/linux/package/nvram/src/Makefile +++ /dev/null @@ -1,22 +0,0 @@ -# $Id$ - -EXTRA_CFLAGS := -c -I. -I../include -LIBSHARED_OBJS := shutils.o wl.o wl_linux.o defaults.o linux_timer.o -LIBNVRAM_OBJS := nvram_linux.o nvram_convert.o - -all: libshared.so libnvram.so nvram - -%.o: %.c - $(CC) $(CFLAGS) $(EXTRA_CFLAGS) -o $@ $^ - -libshared.so: $(LIBSHARED_OBJS) - $(CC) -shared -o $@ $^ - -libnvram.so: $(LIBNVRAM_OBJS) - $(CC) -shared -o $@ $^ - -nvram: main.o - $(CC) -o $@ $^ -L. -lnvram - -clean: - rm -f *.o *.so nvram diff --git a/openwrt/target/linux/package/nvram/src/bcmtimer.h b/openwrt/target/linux/package/nvram/src/bcmtimer.h deleted file mode 100644 index 3db9e624f9..0000000000 --- a/openwrt/target/linux/package/nvram/src/bcmtimer.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright 2004, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - * - * Low resolution timer interface. Timer handlers may be called - * in a deferred manner in a different task context after the - * timer expires or in the task context from which the timer - * was created, depending on the implementation. - * - * $Id$ - */ -#ifndef __bcmtimer_h__ -#define __bcmtimer_h__ - -/* ANSI headers */ -#include - -/* timer ID */ -typedef unsigned int bcm_timer_module_id; -typedef unsigned int bcm_timer_id; - -/* timer callback */ -typedef void (*bcm_timer_cb)(bcm_timer_id id, int data); - -/* OS-independant interfaces, applications should call these functions only */ -int bcm_timer_module_init(int timer_entries, bcm_timer_module_id *module_id); -int bcm_timer_module_cleanup(bcm_timer_module_id module_id); -int bcm_timer_module_enable(bcm_timer_module_id module_id, int enable); -int bcm_timer_create(bcm_timer_module_id module_id, bcm_timer_id *timer_id); -int bcm_timer_delete(bcm_timer_id timer_id); -int bcm_timer_gettime(bcm_timer_id timer_id, struct itimerspec *value); -int bcm_timer_settime(bcm_timer_id timer_id, const struct itimerspec *value); -int bcm_timer_connect(bcm_timer_id timer_id, bcm_timer_cb func, int data); -int bcm_timer_cancel(bcm_timer_id timer_id); -int bcm_timer_change_expirytime(bcm_timer_id timer_id, const struct itimerspec *timer_spec); - -#endif /* #ifndef __bcmtimer_h__ */ diff --git a/openwrt/target/linux/package/nvram/src/defaults.c b/openwrt/target/linux/package/nvram/src/defaults.c deleted file mode 100644 index 119eaac72e..0000000000 --- a/openwrt/target/linux/package/nvram/src/defaults.c +++ /dev/null @@ -1,179 +0,0 @@ -/* - * Router default NVRAM values - * - * Copyright 2004, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - * - * $Id$ - */ - -#include -#include -#include -#include -#include - -#define XSTR(s) STR(s) -#define STR(s) #s - -struct nvram_tuple router_defaults[] = { - /* OS parameters */ - { "os_name", "", 0 }, /* OS name string */ - { "os_version", EPI_VERSION_STR, 0 }, /* OS revision */ - { "os_date", __DATE__, 0 }, /* OS date */ - - /* Miscellaneous parameters */ - { "timer_interval", "3600", 0 }, /* Timer interval in seconds */ - { "ntp_server", "192.5.41.40 192.5.41.41 133.100.9.2", 0 }, /* NTP server */ - { "time_zone", "PST8PDT", 0 }, /* Time zone (GNU TZ format) */ - { "log_level", "0", 0 }, /* Bitmask 0:off 1:denied 2:accepted */ - { "upnp_enable", "0", 0 }, /* Start UPnP */ - { "ezc_enable", "1", 0 }, /* Enable EZConfig updates */ - { "ezc_version", "1", 0 }, /* EZConfig version */ - { "is_default", "1", 0 }, /* is it default setting: 1:yes 0:no*/ - { "os_server", "", 0 }, /* URL for getting upgrades */ - { "stats_server", "", 0 }, /* URL for posting stats */ - { "console_loglevel", "1", 0 }, /* Kernel panics only */ - - /* Big switches */ - { "router_disable", "0", 0 }, /* lan_proto=static lan_stp=0 wan_proto=disabled */ - { "fw_disable", "0", 0 }, /* Disable firewall (allow new connections from the WAN) */ - - { "log_ipaddr", "", 0 }, /* syslog recipient */ - - /* LAN H/W parameters */ - { "lan_ifname", "", 0 }, /* LAN interface name */ - { "lan_ifnames", "", 0 }, /* Enslaved LAN interfaces */ - { "lan_hwnames", "", 0 }, /* LAN driver names (e.g. et0) */ - { "lan_hwaddr", "", 0 }, /* LAN interface MAC address */ - - /* LAN TCP/IP parameters */ - { "lan_proto", "dhcp", 0 }, /* [static|dhcp] */ - { "lan_ipaddr", "192.168.1.1", 0 }, /* LAN IP address */ - { "lan_netmask", "255.255.255.0", 0 }, /* LAN netmask */ - { "lan_stp", "0", 0 }, /* LAN spanning tree protocol */ - { "lan_wins", "", 0 }, /* x.x.x.x x.x.x.x ... */ - { "lan_domain", "", 0 }, /* LAN domain name */ - { "lan_lease", "86400", 0 }, /* LAN lease time in seconds */ - - /* WAN H/W parameters */ - { "wan_ifname", "", 0 }, /* WAN interface name */ - { "wan_ifnames", "", 0 }, /* WAN interface names */ - { "wan_hwname", "", 0 }, /* WAN driver name (e.g. et1) */ - { "wan_hwaddr", "", 0 }, /* WAN interface MAC address */ - - /* WAN TCP/IP parameters */ - { "wan_proto", "dhcp", 0 }, /* [static|dhcp|pppoe|disabled] */ - { "wan_ipaddr", "0.0.0.0", 0 }, /* WAN IP address */ - { "wan_netmask", "0.0.0.0", 0 }, /* WAN netmask */ - { "wan_gateway", "0.0.0.0", 0 }, /* WAN gateway */ - { "wan_dns", "", 0 }, /* x.x.x.x x.x.x.x ... */ - { "wan_wins", "", 0 }, /* x.x.x.x x.x.x.x ... */ - { "wan_hostname", "", 0 }, /* WAN hostname */ - { "wan_domain", "", 0 }, /* WAN domain name */ - { "wan_lease", "86400", 0 }, /* WAN lease time in seconds */ - - /* PPPoE parameters */ - { "wan_pppoe_ifname", "", 0 }, /* PPPoE enslaved interface */ - { "wan_pppoe_username", "", 0 }, /* PPP username */ - { "wan_pppoe_passwd", "", 0 }, /* PPP password */ - { "wan_pppoe_idletime", "60", 0 }, /* Dial on demand max idle time (seconds) */ - { "wan_pppoe_keepalive", "0", 0 }, /* Restore link automatically */ - { "wan_pppoe_demand", "0", 0 }, /* Dial on demand */ - { "wan_pppoe_mru", "1492", 0 }, /* Negotiate MRU to this value */ - { "wan_pppoe_mtu", "1492", 0 }, /* Negotiate MTU to the smaller of this value or the peer MRU */ - { "wan_pppoe_service", "", 0 }, /* PPPoE service name */ - { "wan_pppoe_ac", "", 0 }, /* PPPoE access concentrator name */ - - /* Misc WAN parameters */ - { "wan_desc", "", 0 }, /* WAN connection description */ - { "wan_route", "", 0 }, /* Static routes (ipaddr:netmask:gateway:metric:ifname ...) */ - { "wan_primary", "0", 0 }, /* Primary wan connection */ - - { "wan_unit", "0", 0 }, /* Last configured connection */ - - /* Filters */ - { "filter_maclist", "", 0 }, /* xx:xx:xx:xx:xx:xx ... */ - { "filter_macmode", "deny", 0 }, /* "allow" only, "deny" only, or "disabled" (allow all) */ - { "filter_client0", "", 0 }, /* [lan_ipaddr0-lan_ipaddr1|*]:lan_port0-lan_port1,proto,enable,day_start-day_end,sec_start-sec_end,desc */ - - /* Port forwards */ - { "dmz_ipaddr", "", 0 }, /* x.x.x.x (equivalent to 0-60999>dmz_ipaddr:0-60999) */ - { "forward_port0", "", 0 }, /* wan_port0-wan_port1>lan_ipaddr:lan_port0-lan_port1[:,]proto[:,]enable[:,]desc */ - { "autofw_port0", "", 0 }, /* out_proto:out_port,in_proto:in_port0-in_port1>to_port0-to_port1,enable,desc */ - - /* DHCP server parameters */ - { "dhcp_start", "192.168.1.100", 0 }, /* First assignable DHCP address */ - { "dhcp_end", "192.168.1.150", 0 }, /* Last assignable DHCP address */ - { "dhcp_domain", "wan", 0 }, /* Use WAN domain name first if available (wan|lan) */ - { "dhcp_wins", "wan", 0 }, /* Use WAN WINS first if available (wan|lan) */ - - /* Web server parameters */ - { "http_username", "", 0 }, /* Username */ - { "http_passwd", "admin", 0 }, /* Password */ - { "http_wanport", "", 0 }, /* WAN port to listen on */ - { "http_lanport", "80", 0 }, /* LAN port to listen on */ - - /* Wireless parameters */ - { "wl_ifname", "", 0 }, /* Interface name */ - { "wl_hwaddr", "", 0 }, /* MAC address */ - { "wl_phytype", "g", 0 }, /* Current wireless band ("a" (5 GHz), "b" (2.4 GHz), or "g" (2.4 GHz)) */ - { "wl_corerev", "", 0 }, /* Current core revision */ - { "wl_phytypes", "", 0 }, /* List of supported wireless bands (e.g. "ga") */ - { "wl_radioids", "", 0 }, /* List of radio IDs */ - { "wl_ssid", "OpenWrt", 0 }, /* Service set ID (network name) */ - { "wl_country", "", 0 }, /* Country (default obtained from driver) */ - { "wl_radio", "1", 0 }, /* Enable (1) or disable (0) radio */ - { "wl_closed", "0", 0 }, /* Closed (hidden) network */ - { "wl_ap_isolate", "0", 0 }, /* AP isolate mode */ - { "wl_mode", "ap", 0 }, /* AP mode (ap|sta|wds) */ - { "wl_lazywds", "0", 0 }, /* Enable "lazy" WDS mode (0|1) */ - { "wl_wds", "", 0 }, /* xx:xx:xx:xx:xx:xx ... */ - { "wl_wep", "disabled", 0 }, /* WEP data encryption (enabled|disabled) */ - { "wl_auth", "0", 0 }, /* Shared key authentication optional (0) or required (1) */ - { "wl_key", "1", 0 }, /* Current WEP key */ - { "wl_key1", "", 0 }, /* 5/13 char ASCII or 10/26 char hex */ - { "wl_key2", "", 0 }, /* 5/13 char ASCII or 10/26 char hex */ - { "wl_key3", "", 0 }, /* 5/13 char ASCII or 10/26 char hex */ - { "wl_key4", "", 0 }, /* 5/13 char ASCII or 10/26 char hex */ - { "wl_maclist", "", 0 }, /* xx:xx:xx:xx:xx:xx ... */ - { "wl_macmode", "disabled", 0 }, /* "allow" only, "deny" only, or "disabled" (allow all) */ - { "wl_channel", "11", 0 }, /* Channel number */ - { "wl_rate", "0", 0 }, /* Rate (bps, 0 for auto) */ - { "wl_rateset", "default", 0 }, /* "default" or "all" or "12" */ - { "wl_frag", "2346", 0 }, /* Fragmentation threshold */ - { "wl_rts", "2347", 0 }, /* RTS threshold */ - { "wl_dtim", "1", 0 }, /* DTIM period */ - { "wl_bcn", "100", 0 }, /* Beacon interval */ - { "wl_plcphdr", "long", 0 }, /* 802.11b PLCP preamble type */ - { "wl_net_mode", "mixed", 0 }, /* 54g mode */ - { "wl_gmode", "6", 0 }, /* 54g mode */ - { "wl_gmode_protection", "auto", 0 }, /* 802.11g RTS/CTS protection (off|auto) */ - { "wl_afterburner", "auto", 0 }, /* AfterBurner */ - { "wl_frameburst", "off", 0 }, /* BRCM Frambursting mode (off|on) */ - { "wl_antdiv", "-1", 0 }, /* Antenna Diversity (-1|0|1|3) */ - { "wl_infra", "1", 0 }, /* Network Type (BSS/IBSS) */ - - /* WPA parameters */ - { "security_mode", "open", 0 }, - { "wl_auth_mode", "open", 0 }, /* Network authentication mode (open|shared|radius|wpa|psk) */ - { "wl_wpa_psk", "", 0 }, /* WPA pre-shared key */ - { "wl_wpa_gtk_rekey", "3600", 0 }, /* GTK rotation interval */ - { "wl_radius_ipaddr", "", 0 }, /* RADIUS server IP address */ - { "wl_radius_key", "", 0 }, /* RADIUS shared secret */ - { "wl_radius_port", "1812", 0 }, /* RADIUS server UDP port */ - { "wl_crypto", "tkip", 0 }, /* WPA data encryption */ - - - { "wl_unit", "0", 0 }, /* Last configured interface */ - - /* Restore defaults */ - { "restore_defaults", "0", 0 }, /* Set to 0 to not restore defaults on boot */ - - { 0, 0, 0 } -}; diff --git a/openwrt/target/linux/package/nvram/src/linux_timer.c b/openwrt/target/linux/package/nvram/src/linux_timer.c deleted file mode 100644 index 0402e44378..0000000000 --- a/openwrt/target/linux/package/nvram/src/linux_timer.c +++ /dev/null @@ -1,738 +0,0 @@ -/* - * Copyright 2004, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - * - * Low resolution timer interface linux specific implementation. - * - * $Id$ - */ - -/* -* debug facilities -*/ -#define TIMER_DEBUG 0 -#if TIMER_DEBUG -#define TIMERDBG(fmt, args...) printf("%s: " fmt "\n" , __FUNCTION__ , ## args) -#else -#define TIMERDBG(fmt, args...) -#endif - - -/* - * POSIX timer support for Linux. Taken from linux_timer.c in upnp - */ - -#define __USE_GNU - - -#include // for malloc, free, etc. -#include // for memset, strncasecmp, etc. -#include // for assert, of course. -#include // for sigemptyset, etc. -#include // for printf, etc. -#include -#include - -/* define TIMER_PROFILE to enable code which guages how accurate the timer functions are. - For each expiring timer the code will print the expected time interval and the actual time interval. -#define TIMER_PROFILE -*/ -#undef TIMER_PROFILE - -/* -timer_cancel( ) - cancel a timer -timer_connect( ) - connect a user routine to the timer signal -timer_create( ) - allocate a timer using the specified clock for a timing base (POSIX) -timer_delete( ) - remove a previously created timer (POSIX) -timer_gettime( ) - get the remaining time before expiration and the reload value (POSIX) -timer_getoverrun( ) - return the timer expiration overrun (POSIX) -timer_settime( ) - set the time until the next expiration and arm timer (POSIX) -nanosleep( ) - suspend the current task until the time interval elapses (POSIX) -*/ - -#define MS_PER_SEC 1000 -#define US_PER_SEC 1000000 -#define US_PER_MS 1000 -#define UCLOCKS_PER_SEC 1000000 - -typedef void (*event_callback_t)(timer_t, int); - -#ifndef TIMESPEC_TO_TIMEVAL -# define TIMESPEC_TO_TIMEVAL(tv, ts) { \ - (tv)->tv_sec = (ts)->tv_sec; \ - (tv)->tv_usec = (ts)->tv_nsec / 1000; \ -} -#endif - -#ifndef TIMEVAL_TO_TIMESPEC -# define TIMEVAL_TO_TIMESPEC(tv, ts) { \ - (ts)->tv_sec = (tv)->tv_sec; \ - (ts)->tv_nsec = (tv)->tv_usec * 1000; \ -} -#endif - -#define ROUNDUP(x,y) ((((x)+(y)-1)/(y))*(y)) - -#define timerroundup(t,g) \ - do { \ - if (!timerisset(t)) (t)->tv_usec=1; \ - if ((t)->tv_sec == 0) (t)->tv_usec=ROUNDUP((t)->tv_usec, g); \ - } while (0) - -typedef long uclock_t; - -#define TFLAG_NONE 0 -#define TFLAG_CANCELLED (1<<0) -#define TFLAG_DELETED (1<<1) - -struct event { - struct timeval it_interval; - struct timeval it_value; - event_callback_t func; - int arg; - unsigned short flags; - struct event *next; -#ifdef TIMER_PROFILE - uint expected_ms; - uclock_t start; -#endif -}; - -void timer_cancel(timer_t timerid); - -static void alarm_handler(int i); -static void check_event_queue(); -static void print_event_queue(); -static void check_timer(); -#if THIS_FINDS_USE -static int count_queue(struct event *); -#endif -static int timer_change_settime(timer_t timer_id, const struct itimerspec *timer_spec); -void block_timer(); -void unblock_timer(); - -static struct event *event_queue = NULL; -static struct event *event_freelist; -static uint g_granularity; -static int g_maxevents = 0; - -uclock_t uclock() -{ - struct timeval tv; - - gettimeofday(&tv, NULL); - return ((tv.tv_sec * US_PER_SEC) + tv.tv_usec); -} - - -void init_event_queue(int n) -{ - int i; - struct itimerval tv; - - g_maxevents = n; - event_freelist = (struct event *) malloc(n * sizeof(struct event)); - memset(event_freelist, 0, n * sizeof(struct event)); - - for (i = 0; i < (n-1); i++) - event_freelist[i].next = &event_freelist[i+1]; - - event_freelist[i].next = NULL; - - tv.it_interval.tv_sec = 0; - tv.it_interval.tv_usec = 1; - tv.it_value.tv_sec = 0; - tv.it_value.tv_usec = 0; - setitimer (ITIMER_REAL, &tv, 0); - setitimer (ITIMER_REAL, 0, &tv); - g_granularity = tv.it_interval.tv_usec; - - signal(SIGALRM, alarm_handler); -} - - -int clock_gettime( - clockid_t clock_id, /* clock ID (always CLOCK_REALTIME) */ - struct timespec * tp /* where to store current time */ -) -{ - struct timeval tv; - int n; - - - n = gettimeofday(&tv, NULL); - TIMEVAL_TO_TIMESPEC(&tv, tp); - - return n; -} - - -int timer_create( - clockid_t clock_id, /* clock ID (always CLOCK_REALTIME) */ - struct sigevent * evp, /* user event handler */ - timer_t * pTimer /* ptr to return value */ -) -{ - struct event *event; - - if (clock_id != CLOCK_REALTIME) { - TIMERDBG("timer_create can only support clock id CLOCK_REALTIME"); - exit(1); - } - - if (evp != NULL) { - if (evp->sigev_notify != SIGEV_SIGNAL || evp->sigev_signo != SIGALRM) { - TIMERDBG("timer_create can only support signalled alarms using SIGALRM"); - exit(1); - } - } - - event = event_freelist; - if (event == NULL) { - print_event_queue(); - } - assert(event != NULL); - - event->flags = TFLAG_NONE; - - event_freelist = event->next; - event->next = NULL; - - check_event_queue(); - - *pTimer = (timer_t) event; - - return 0; -} - -int timer_delete( - timer_t timerid /* timer ID */ -) -{ - struct event *event = (struct event *) timerid; - - if (event->flags & TFLAG_DELETED) { - TIMERDBG("Cannot delete a deleted event"); - return 1; - } - - timer_cancel(timerid); - - event->flags |= TFLAG_DELETED; - - event->next = event_freelist; - event_freelist = event; - - return 0; -} - -int timer_connect -( - timer_t timerid, /* timer ID */ - void (*routine)(timer_t, int), /* user routine */ - int arg /* user argument */ -) -{ - struct event *event = (struct event *) timerid; - - assert(routine != NULL); - event->func = routine; - event->arg = arg; - - return 0; -} - -/* - * Please Call this function only from the call back functions of the alarm_handler. - * This is just a hack -*/ -int timer_change_settime -( - timer_t timerid, /* timer ID */ - const struct itimerspec * value /* time to be set */ -) -{ - struct event *event = (struct event *) timerid; - - TIMESPEC_TO_TIMEVAL(&event->it_interval, &value->it_interval); - TIMESPEC_TO_TIMEVAL(&event->it_value, &value->it_value); - - return 1; -} - -int timer_settime -( - timer_t timerid, /* timer ID */ - int flags, /* absolute or relative */ - const struct itimerspec * value, /* time to be set */ - struct itimerspec * ovalue /* previous time set (NULL=no result) */ -) -{ - struct itimerval itimer; - struct event *event = (struct event *) timerid; - struct event **ppevent; - - TIMESPEC_TO_TIMEVAL(&event->it_interval, &value->it_interval); - TIMESPEC_TO_TIMEVAL(&event->it_value, &value->it_value); - - /* if .it_value is zero, the timer is disarmed */ - if (!timerisset(&event->it_value)) { - timer_cancel(timerid); - return 0; - } - - block_timer(); - -#ifdef TIMER_PROFILE - event->expected_ms = (event->it_value.tv_sec * MS_PER_SEC) + (event->it_value.tv_usec / US_PER_MS); - event->start = uclock(); -#endif - if (event->next) { - TIMERDBG("calling timer_settime with a timer that is already on the queue."); - } - - - /* We always want to make sure that the event at the head of the - queue has a timeout greater than the itimer granularity. - Otherwise we end up with the situation that the time remaining - on an itimer is greater than the time at the head of the queue - in the first place. */ - timerroundup(&event->it_value, g_granularity); - - timerclear(&itimer.it_value); - getitimer(ITIMER_REAL, &itimer); - if (timerisset(&itimer.it_value)) { - // reset the top timer to have an interval equal to the remaining interval - // when the timer was cancelled. - if (event_queue) { - if (timercmp(&(itimer.it_value), &(event_queue->it_value), >)) { - // it is an error if the amount of time remaining is more than the amount of time - // requested by the top event. - // - TIMERDBG("timer_settime: TIMER ERROR!"); - - } else { - // some portion of the top event has already expired. - // Reset the interval of the top event to remaining - // time left in that interval. - // - event_queue->it_value = itimer.it_value; - - // if we were the earliest timer before now, we are still the earliest timer now. - // we do not need to reorder the list. - } - } - } - - // Now, march down the list, decrementing the new timer by the - // current it_value of each event on the queue. - ppevent = &event_queue; - while (*ppevent) { - if ( timercmp(&(event->it_value), &((*ppevent)->it_value), <) ) { - // if the proposed event will trigger sooner than the next event - // in the queue, we will insert the new event just before the next one. - // - // we also need to adjust the delta value to the next event. - timersub(&((*ppevent)->it_value), &(event->it_value), &((*ppevent)->it_value)); - break; - } - // subtract the interval of the next event from the proposed interval. - timersub(&(event->it_value), &((*ppevent)->it_value), &(event->it_value)); - - ppevent = &((*ppevent)->next); - } - - // we have found our proper place in the queue, - // link our new event into the pending event queue. - event->next = *ppevent; - *ppevent = event; - - check_event_queue(); - - // if our new event ended up at the front of the queue, reissue the timer. - if (event == event_queue) { - timerroundup(&event_queue->it_value, g_granularity); - timerclear(&itimer.it_interval); - itimer.it_value = event_queue->it_value; - - // we want to be sure to never turn off the timer completely, - // so if the next interval is zero, set it to some small value. - if (!timerisset(&(itimer.it_value))) - itimer.it_value = (struct timeval) { 0, 1 }; - - assert(!timerisset(&itimer.it_interval)); - assert(itimer.it_value.tv_sec > 0 || itimer.it_value.tv_usec >= g_granularity); - assert(event_queue->it_value.tv_sec > 0 || event_queue->it_value.tv_usec >= g_granularity); - setitimer(ITIMER_REAL, &itimer, NULL); - check_timer(); - } - - event->flags &= ~TFLAG_CANCELLED; - - unblock_timer(); - - return 0; -} - -static void check_timer() -{ - struct itimerval itimer; - - getitimer(ITIMER_REAL, &itimer); - if (timerisset(&itimer.it_interval)) { - TIMERDBG("ERROR timer interval is set."); - } - if (timercmp(&(itimer.it_value), &(event_queue->it_value), >)) { - TIMERDBG("ERROR timer expires later than top event."); - } -} - - -static void check_event_queue() -{ - struct timeval sum; - struct event *event; - int i = 0; - -#ifdef notdef - int nfree = 0; - struct event *p; - for (p = event_freelist; p; p = p->next) - nfree++; - printf("%d free events\n", nfree); -#endif - - timerclear(&sum); - for (event = event_queue; event; event = event->next) { - if (i > g_maxevents) { - TIMERDBG("timer queue looks like it loops back on itself!"); - print_event_queue(); - exit(1); - } - i++; - } -} - -#if THIS_FINDS_USE -/* The original upnp version has this unused function, so I left it in - to maintain the resemblance. */ -static int count_queue(struct event *event_queue) -{ - struct event *event; - int i = 0; - for (event = event_queue; event; event = event->next) - i++; - return i; -} -#endif - -static void print_event_queue() -{ - struct event *event; - int i = 0; - - for (event = event_queue; event; event = event->next) { - printf("#%d (0x%x)->0x%x: \t%d sec %d usec\t%p\n", - i++, (unsigned int) event, (unsigned int) event->next, (int) event->it_value.tv_sec, (int) event->it_value.tv_usec, event->func); - if (i > g_maxevents) { - printf("...(giving up)\n"); - break; - } - } -} - -// The top element of the event queue must have expired. -// Remove that element, run its function, and reset the timer. -// if there is no interval, recycle the event structure. -static void alarm_handler(int i) -{ - struct event *event, **ppevent; - struct itimerval itimer; - struct timeval small_interval = { 0, g_granularity/2 }; -#ifdef TIMER_PROFILE - uint junk; - uclock_t end; - uint actual; -#endif - - block_timer(); - - // Loop through the event queue and remove the first event plus any - // subsequent events that will expire very soon thereafter (within 'small_interval'}. - // - do { - // remove the top event. - event = event_queue; - event_queue = event_queue->next; - event->next = NULL; - -#ifdef TIMER_PROFILE - end = uclock(); - actual = ((end-event->start)/((uclock_t)UCLOCKS_PER_SEC/1000)); - if (actual < 0) - junk = end; - TIMERDBG("expected %d ms actual %d ms", event->expected_ms, ((end-event->start)/((uclock_t)UCLOCKS_PER_SEC/1000))); -#endif - - // call the event callback function - (*(event->func))((timer_t) event, (int)event->arg); - - /* If the event has been cancelled, do NOT put it back on the queue. */ - if ( !(event->flags & TFLAG_CANCELLED) ) { - - // if the event is a recurring event, reset the timer and - // find its correct place in the sorted list of events. - // - if (timerisset(&event->it_interval)) { - // event is recurring... - // - event->it_value = event->it_interval; -#ifdef TIMER_PROFILE - event->expected_ms = (event->it_value.tv_sec * MS_PER_SEC) + (event->it_value.tv_usec / US_PER_MS); - event->start = uclock(); -#endif - timerroundup(&event->it_value, g_granularity); - - // Now, march down the list, decrementing the new timer by the - // current delta of each event on the queue. - ppevent = &event_queue; - while (*ppevent) { - if ( timercmp(&(event->it_value), &((*ppevent)->it_value), <) ) { - // if the proposed event will trigger sooner than the next event - // in the queue, we will insert the new event just before the next one. - // - // we also need to adjust the delta value to the next event. - timersub(&((*ppevent)->it_value), &(event->it_value), &((*ppevent)->it_value)); - break; - } - timersub(&(event->it_value), &((*ppevent)->it_value), &(event->it_value)); - ppevent = &((*ppevent)->next); - } - - // we have found our proper place in the queue, - // link our new event into the pending event queue. - event->next = *ppevent; - *ppevent = event; - } else { - // there is no interval, so recycle the event structure. - //timer_delete((timer_t) event); - } - } - - check_event_queue(); - - } while (event_queue && timercmp(&event_queue->it_value, &small_interval, <)); - - // re-issue the timer... - if (event_queue) { - timerroundup(&event_queue->it_value, g_granularity); - - timerclear(&itimer.it_interval); - itimer.it_value = event_queue->it_value; - // we want to be sure to never turn off the timer completely, - // so if the next interval is zero, set it to some small value. - if (!timerisset(&(itimer.it_value))) - itimer.it_value = (struct timeval) { 0, 1 }; - - setitimer(ITIMER_REAL, &itimer, NULL); - check_timer(); - } else { - TIMERDBG("There are no events in the queue - timer not reset."); - } - - unblock_timer(); -} - -static int block_count = 0; - -void block_timer() -{ - sigset_t set; - - if (block_count++ == 0) { - sigemptyset(&set); - sigaddset(&set, SIGALRM); - sigprocmask(SIG_BLOCK, &set, NULL); - } -} - -void unblock_timer() -{ - sigset_t set; - - if (--block_count == 0) { - sigemptyset(&set); - sigaddset(&set, SIGALRM); - sigprocmask(SIG_UNBLOCK, &set, NULL); - } -} - -void timer_cancel_all() -{ - struct itimerval timeroff = { { 0, 0 }, { 0, 0} }; - struct event *event; - struct event **ppevent; - - setitimer(ITIMER_REAL, &timeroff, NULL); - - ppevent = &event_queue; - while (*ppevent) { - event = *ppevent; - *ppevent = event->next; - event->next = NULL; - } -} - - - -void timer_cancel(timer_t timerid) -{ - struct itimerval itimer; - struct itimerval timeroff = { { 0, 0 }, { 0, 0} }; - struct event *event = (struct event *) timerid; - struct event **ppevent; - - if (event->flags & TFLAG_CANCELLED) { - TIMERDBG("Cannot cancel a cancelled event"); - return; - } - - block_timer(); - - ppevent = &event_queue; - while (*ppevent) { - if ( *ppevent == event ) { - - /* RACE CONDITION - if the alarm goes off while we are in - this loop, and if the timer we want to cancel is the - next to expire, the alarm will end up firing - after this routine is complete, causing it to go off early. */ - - /* If the cancelled timer is the next to expire, - we need to do something special to clean up correctly. */ - if (event == event_queue && event->next != NULL) { - timerclear(&itimer.it_value); - getitimer(ITIMER_REAL, &itimer); - - /* subtract the time that has already passed while waiting for this timer... */ - timersub(&(event->it_value), &(itimer.it_value), &(event->it_value)); - - /* and add any remainder to the next timer in the list */ - timeradd(&(event->next->it_value), &(event->it_value), &(event->next->it_value)); - } - - *ppevent = event->next; - event->next = NULL; - - if (event_queue) { - timerroundup(&event_queue->it_value, g_granularity); - timerclear(&itimer.it_interval); - itimer.it_value = event_queue->it_value; - - /* We want to be sure to never turn off the timer - completely if there are more events on the queue, - so if the next interval is zero, set it to some - small value. */ - - if (!timerisset(&(itimer.it_value))) - itimer.it_value = (struct timeval) { 0, 1 }; - - assert(itimer.it_value.tv_sec > 0 || itimer.it_value.tv_usec >= g_granularity); - assert(event_queue->it_value.tv_sec > 0 || event_queue->it_value.tv_usec >= g_granularity); - setitimer(ITIMER_REAL, &itimer, NULL); - check_timer(); - } else { - setitimer(ITIMER_REAL, &timeroff, NULL); - } - break; - } - ppevent = &((*ppevent)->next); - } - - event->flags |= TFLAG_CANCELLED; - - unblock_timer(); -} - -/* -* timer related headers -*/ -#include "bcmtimer.h" - -/* -* locally used global variables and constants -*/ - -/* -* Initialize internal resources used in the timer module. It must be called -* before any other timer function calls. The param 'timer_entries' is used -* to pre-allocate fixed number of timer entries. -*/ -int bcm_timer_module_init(int timer_entries, bcm_timer_module_id *module_id) -{ - init_event_queue(timer_entries); - *module_id = (bcm_timer_module_id)event_freelist; - return 0; -} - -/* -* Cleanup internal resources used by this timer module. It deletes all -* pending timer entries from the backend timer system as well. -*/ -int bcm_timer_module_cleanup(bcm_timer_module_id module_id) -{ - module_id = 0; - return 0; -} - -/* Enable/Disable timer module */ -int bcm_timer_module_enable(bcm_timer_module_id module_id, int enable) -{ - if (enable) - unblock_timer(); - else - block_timer(); - return 0; -} - -int bcm_timer_create(bcm_timer_module_id module_id, bcm_timer_id *timer_id) -{ - module_id = 0; - return timer_create(CLOCK_REALTIME, NULL, (timer_t *)timer_id); -} - -int bcm_timer_delete(bcm_timer_id timer_id) -{ - return timer_delete((timer_t)timer_id); -} - -int bcm_timer_gettime(bcm_timer_id timer_id, struct itimerspec *timer_spec) -{ - return -1; -} - -int bcm_timer_settime(bcm_timer_id timer_id, const struct itimerspec *timer_spec) -{ - return timer_settime((timer_t)timer_id, 0, timer_spec, NULL); -} - -int bcm_timer_connect(bcm_timer_id timer_id, bcm_timer_cb func, int data) -{ - return timer_connect((timer_t)timer_id, (void *)func, data); -} - -int bcm_timer_cancel(bcm_timer_id timer_id) -{ - timer_cancel((timer_t)timer_id); - return 0; -} -int bcm_timer_change_expirytime(bcm_timer_id timer_id, const struct itimerspec *timer_spec) -{ - timer_change_settime((timer_t)timer_id, timer_spec); - return 1; -} diff --git a/openwrt/target/linux/package/nvram/src/main.c b/openwrt/target/linux/package/nvram/src/main.c deleted file mode 100644 index a64430f7bc..0000000000 --- a/openwrt/target/linux/package/nvram/src/main.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * Frontend command-line utility for Linux NVRAM layer - * - * Copyright 2004, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - * - * $Id$ - */ - -#include -#include -#include - -#include -#include - -static void -usage(void) -{ - fprintf(stderr, "usage: nvram [get name] [set name=value] [unset name] [show]\n"); - exit(0); -} - -/* NVRAM utility */ -int -main(int argc, char **argv) -{ - char *name, *value, buf[NVRAM_SPACE]; - int size; - - /* Skip program name */ - --argc; - ++argv; - - if (!*argv) - usage(); - - /* Process the remaining arguments. */ - for (; *argv; argv++) { - if (!strncmp(*argv, "get", 3)) { - if (*++argv) { - if ((value = nvram_get(*argv))) - puts(value); - } - } - else if (!strncmp(*argv, "set", 3)) { - if (*++argv) { - strncpy(value = buf, *argv, sizeof(buf)); - name = strsep(&value, "="); - nvram_set(name, value); - } - } - else if (!strncmp(*argv, "unset", 5)) { - if (*++argv) - nvram_unset(*argv); - } - else if (!strncmp(*argv, "commit", 5)) { - nvram_commit(); - } - else if (!strncmp(*argv, "show", 4) || - !strncmp(*argv, "getall", 6)) { - nvram_getall(buf, sizeof(buf)); - for (name = buf; *name; name += strlen(name) + 1) - puts(name); - size = sizeof(struct nvram_header) + (int) name - (int) buf; - fprintf(stderr, "size: %d bytes (%d left)\n", size, NVRAM_SPACE - size); - } - if (!*argv) - break; - } - - return 0; -} diff --git a/openwrt/target/linux/package/nvram/src/nvram_convert.c b/openwrt/target/linux/package/nvram/src/nvram_convert.c deleted file mode 100644 index 485909026c..0000000000 --- a/openwrt/target/linux/package/nvram/src/nvram_convert.c +++ /dev/null @@ -1,77 +0,0 @@ - -#define WL(a) "wl_"a -#define WL0(a) "wl0_"a -#define D11G(a) "d11g_"a - -#define PPP(a) "ppp_"a -#define PPPOE(a) "pppoe_"a - -struct nvram_convert { - char *name; // for WEB - char *wl0_name; // for driver - char *d11g_name; // for old nv name -}; - -struct nvram_convert nvram_converts[] = { - // Bellow change from 3.11.48.7 - { WL("ssid"), WL0("ssid"), ""}, - { WL("radio"), WL0("mode"), ""}, - { WL("mode"), WL0("mode"), ""}, - { WL("wds"), WL0("wds"), ""}, - { WL("auth"), WL0("auth"), ""}, - { WL("key"), WL0("key"), ""}, - { WL("key1"), WL0("key1"), ""}, - { WL("key2"), WL0("key2"), ""}, - { WL("key3"), WL0("key3"), ""}, - { WL("key4"), WL0("key4"), ""}, - { WL("maclist"), WL0("maclist"), ""}, - { WL("channel"), WL0("channel"), D11G("channel")}, - { WL("rateset"), WL0("rateset"), D11G("rateset")}, - { WL("rts"), WL0("rts"), D11G("rts")}, - { WL("bcn"), WL0("bcn"), D11G("bcn")}, - { WL("gmode"), WL0("gmode"), "d11g_mode"}, - { WL("unit"), WL0("unit"), ""}, - { WL("ifname"), WL0("ifname"), ""}, - { WL("phytype"), WL0("phytype"), ""}, - { WL("country"), WL0("country"), ""}, - { WL("closed"), WL0("closed"), ""}, - { WL("lazywds"), WL0("lazywds"), ""}, - { WL("wep"), WL0("wep"), ""}, - { WL("macmode"), WL0("macmode"), ""}, - { WL("rate"), WL0("rate"), D11G("rate")}, - { WL("frag"), WL0("frag"), D11G("frag")}, - { WL("dtim"), WL0("dtim"), D11G("dtim")}, - { WL("plcphdr"), WL0("plcphdr"), ""}, - { WL("gmode_protection"), WL0("gmode_protection"), ""}, - { WL("radio"), WL0("radio"), ""}, - // Bellow change from 3.21.9.0 - { WL("auth_mode"), WL0("auth_mode"), ""}, - { WL("radius_ipaddr"), WL0("radius_ipaddr"), ""}, - { WL("radius_port"), WL0("radius_port"), ""}, - { WL("radius_key"), WL0("radius_key"), ""}, - { WL("wpa_psk"), WL0("wpa_psk"), ""}, - { WL("wpa_gtk_rekey"), WL0("wpa_gtk_rekey"), ""}, - { WL("frameburst"), WL0("frameburst"), ""}, - { WL("crypto"), WL0("crypto"), ""}, - { WL("ap_isolate"), WL0("ap_isolate"), ""}, - { WL("afterburner"), WL0("afterburner"), ""}, - // for PPPoE - { PPP("username"), PPPOE("username"), ""}, - { PPP("passwd"), PPPOE("passwd"), ""}, - { PPP("idletime"), PPPOE("idletime"), ""}, - { PPP("keepalive"), PPPOE("keepalive"), ""}, - { PPP("demand"), PPPOE("demand"), ""}, - { PPP("service"), PPPOE("service"), ""}, - { PPP("ac"), PPPOE("ac"), ""}, - { PPP("static"), PPPOE("static"), ""}, - { PPP("static_ip"), PPPOE("static_ip"), ""}, - { PPP("username_1"), PPPOE("username_1"), ""}, - { PPP("passwd_1"), PPPOE("passwd_1"), ""}, - { PPP("idletime_1"), PPPOE("idletime_1"), ""}, - { PPP("keepalive_1"), PPPOE("keepalive_1"), ""}, - { PPP("demand_1"), PPPOE("demand_1"), ""}, - { PPP("service_1"), PPPOE("service_1"), ""}, - { PPP("ac_1"), PPPOE("ac_1"), ""}, - - { 0, 0, 0}, -}; diff --git a/openwrt/target/linux/package/nvram/src/nvram_convert.h b/openwrt/target/linux/package/nvram/src/nvram_convert.h deleted file mode 100644 index 70e12327d1..0000000000 --- a/openwrt/target/linux/package/nvram/src/nvram_convert.h +++ /dev/null @@ -1,7 +0,0 @@ - -struct nvram_convert { - char *name; - char *wl0_name; - char *d11g_name; -}; - diff --git a/openwrt/target/linux/package/nvram/src/nvram_linux.c b/openwrt/target/linux/package/nvram/src/nvram_linux.c deleted file mode 100644 index c41e32118a..0000000000 --- a/openwrt/target/linux/package/nvram/src/nvram_linux.c +++ /dev/null @@ -1,320 +0,0 @@ -/* - * NVRAM variable manipulation (Linux user mode half) - * - * Copyright 2004, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - * - * $Id$ - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -#define PATH_DEV_NVRAM "/dev/nvram" - -/* Globals */ -static int nvram_fd = -1; -static char *nvram_buf = NULL; -int check_action(void); -int file_to_buf(char *path, char *buf, int len); - -int -nvram_init(void *unused) -{ - if ((nvram_fd = open(PATH_DEV_NVRAM, O_RDWR)) < 0) - goto err; - - /* Map kernel string buffer into user space */ - if ((nvram_buf = mmap(NULL, NVRAM_SPACE, PROT_READ, MAP_SHARED, nvram_fd, 0)) == MAP_FAILED) { - close(nvram_fd); - nvram_fd = -1; - goto err; - } - - return 0; - - err: - perror(PATH_DEV_NVRAM); - return errno; -} - -char * -nvram_get(const char *name) -{ - size_t count = strlen(name) + 1; - char tmp[100], *value; - unsigned long *off = (unsigned long *) tmp; - - if (nvram_fd < 0) - if (nvram_init(NULL)) - return NULL; - - if (count > sizeof(tmp)) { - if (!(off = malloc(count))) - return NULL; - } - - /* Get offset into mmap() space */ - strcpy((char *) off, name); - - count = read(nvram_fd, off, count); - - if (count == sizeof(unsigned long)) - value = &nvram_buf[*off]; - else - value = NULL; - - if (count < 0) - perror(PATH_DEV_NVRAM); - - if (off != (unsigned long *) tmp) - free(off); - - return value; -} - -int -nvram_getall(char *buf, int count) -{ - int ret; - - if (nvram_fd < 0) - if ((ret = nvram_init(NULL))) - return ret; - - if (count == 0) - return 0; - - /* Get all variables */ - *buf = '\0'; - - ret = read(nvram_fd, buf, count); - - if (ret < 0) - perror(PATH_DEV_NVRAM); - - return (ret == count) ? 0 : ret; -} - -static int -_nvram_set(const char *name, const char *value) -{ - size_t count = strlen(name) + 1; - char tmp[100], *buf = tmp; - int ret; - - if (nvram_fd < 0) - if ((ret = nvram_init(NULL))) - return ret; - - /* Unset if value is NULL */ - if (value) - count += strlen(value) + 1; - - if (count > sizeof(tmp)) { - if (!(buf = malloc(count))) - return -ENOMEM; - } - - if (value) - sprintf(buf, "%s=%s", name, value); - else - strcpy(buf, name); - - ret = write(nvram_fd, buf, count); - - if (ret < 0) - perror(PATH_DEV_NVRAM); - - if (buf != tmp) - free(buf); - - return (ret == count) ? 0 : ret; -} - -int -nvram_set(const char *name, const char *value) -{ - extern struct nvram_convert nvram_converts[]; - struct nvram_convert *v; - int ret; - - ret = _nvram_set(name, value); - - for(v = nvram_converts ; v->name ; v++) { - if(!strcmp(v->name, name)){ - if(strcmp(v->wl0_name,"")) _nvram_set(v->wl0_name, value); - if(strcmp(v->d11g_name,"")) _nvram_set(v->d11g_name, value); - } - } - - return ret; -} - -int -nvram_unset(const char *name) -{ - return _nvram_set(name, NULL); -} - -int -nvram_commit(void) -{ - int ret; - - cprintf("nvram_commit(): start\n"); - - if((check_action() == ACT_IDLE) || - (check_action() == ACT_SW_RESTORE) || - (check_action() == ACT_HW_RESTORE)){ - if (nvram_fd < 0) - if ((ret = nvram_init(NULL))) - return ret; - - ret = ioctl(nvram_fd, NVRAM_MAGIC, NULL); - - if (ret < 0) - perror(PATH_DEV_NVRAM); - - cprintf("nvram_commit(): end\n"); - } - else - cprintf("nvram_commit(): nothing to do...\n"); - - return ret; -} - -int file2nvram(char *filename, char *varname) { - FILE *fp; - int c,count; - int i=0,j=0; - char mem[10000],buf[30000]; - - if ( !(fp=fopen(filename,"rb") )) - return 0; - - count=fread(mem,1,sizeof(mem),fp); - fclose(fp); - for (j=0;j sizeof(buf)-3 ) - break; - c=mem[j]; - if (c >= 32 && c <= 126 && c != '\\' && c != '~') { - buf[i++]=(unsigned char) c; - } else if (c==0) { - buf[i++]='~'; - } else { - buf[i++]='\\'; - sprintf(buf+i,"%02X",c); - i+=2; - } - } - if (i==0) return 0; - buf[i]=0; - //fprintf(stderr,"================ > file2nvram %s = [%s] \n",varname,buf); - nvram_set(varname,buf); - //nvram_commit(); //Barry adds for test -} - -int nvram2file(char *varname, char *filename) { - FILE *fp; - int c,tmp; - int i=0,j=0; - char *buf; - char mem[10000]; - - if ( !(fp=fopen(filename,"wb") )) - return 0; - - buf=strdup(nvram_safe_get(varname)); - //fprintf(stderr,"=================> nvram2file %s = [%s] \n",varname,buf); - while ( buf[i] && j < sizeof(mem)-3 ) { - if (buf[i] == '\\') { - i++; - tmp=buf[i+2]; - buf[i+2]=0; - sscanf(buf+i,"%02X",&c); - buf[i+2]=tmp; - i+=2; - mem[j]=c;j++; - } else if (buf[i] == '~') { - mem[j]=0;j++; - i++; - } else { - mem[j]=buf[i];j++; - i++; - } - } - if (j<=0) return j; - j=fwrite(mem,1,j,fp); - fclose(fp); - free(buf); - return j; -} - -int -check_action(void) -{ - char buf[80] = ""; - - if(file_to_buf(ACTION_FILE, buf, sizeof(buf))){ - if(!strcmp(buf, "ACT_TFTP_UPGRADE")){ - cprintf("Upgrading from tftp now, quiet exit....\n"); - return ACT_TFTP_UPGRADE; - } - else if(!strcmp(buf, "ACT_WEBS_UPGRADE")){ - cprintf("Upgrading from web (https) now, quiet exit....\n"); - return ACT_WEBS_UPGRADE; - } - else if(!strcmp(buf, "ACT_WEB_UPGRADE")){ - cprintf("Upgrading from web (http) now, quiet exit....\n"); - return ACT_WEB_UPGRADE; - } - else if(!strcmp(buf, "ACT_SW_RESTORE")){ - cprintf("Receive restore command from web, quiet exit....\n"); - return ACT_SW_RESTORE; - } - else if(!strcmp(buf, "ACT_HW_RESTORE")){ - cprintf("Receive restore commond from resetbutton, quiet exit....\n"); - return ACT_HW_RESTORE; - } - } - //fprintf(stderr, "Waiting for upgrading....\n"); - return ACT_IDLE; -} - -int -file_to_buf(char *path, char *buf, int len) -{ - FILE *fp; - - memset(buf, 0 , len); - - if ((fp = fopen(path, "r"))) { - fgets(buf, len, fp); - fclose(fp); - return 1; - } - - return 0; -} diff --git a/openwrt/target/linux/package/nvram/src/shutils.c b/openwrt/target/linux/package/nvram/src/shutils.c deleted file mode 100644 index 49ad41af81..0000000000 --- a/openwrt/target/linux/package/nvram/src/shutils.c +++ /dev/null @@ -1,329 +0,0 @@ -/* - * Shell-like utility functions - * - * Copyright 2004, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - * - * $Id$ - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -/* - * Reads file and returns contents - * @param fd file descriptor - * @return contents of file or NULL if an error occurred - */ -char * -fd2str(int fd) -{ - char *buf = NULL; - size_t count = 0, n; - - do { - buf = realloc(buf, count + 512); - n = read(fd, buf + count, 512); - if (n < 0) { - free(buf); - buf = NULL; - } - count += n; - } while (n == 512); - - close(fd); - if (buf) - buf[count] = '\0'; - return buf; -} - -/* - * Reads file and returns contents - * @param path path to file - * @return contents of file or NULL if an error occurred - */ -char * -file2str(const char *path) -{ - int fd; - - if ((fd = open(path, O_RDONLY)) == -1) { - perror(path); - return NULL; - } - - return fd2str(fd); -} - -/* - * Waits for a file descriptor to change status or unblocked signal - * @param fd file descriptor - * @param timeout seconds to wait before timing out or 0 for no timeout - * @return 1 if descriptor changed status or 0 if timed out or -1 on error - */ -int -waitfor(int fd, int timeout) -{ - fd_set rfds; - struct timeval tv = { timeout, 0 }; - - FD_ZERO(&rfds); - FD_SET(fd, &rfds); - return select(fd + 1, &rfds, NULL, NULL, (timeout > 0) ? &tv : NULL); -} - -/* - * Concatenates NULL-terminated list of arguments into a single - * commmand and executes it - * @param argv argument list - * @param path NULL, ">output", or ">>output" - * @param timeout seconds to wait before timing out or 0 for no timeout - * @param ppid NULL to wait for child termination or pointer to pid - * @return return value of executed command or errno - */ -int -_eval(char *const argv[], char *path, int timeout, int *ppid) -{ - pid_t pid; - int status; - int fd; - int flags; - int sig; - char buf[254]=""; - int i; - - switch (pid = fork()) { - case -1: /* error */ - perror("fork"); - return errno; - case 0: /* child */ - /* Reset signal handlers set for parent process */ - for (sig = 0; sig < (_NSIG-1); sig++) - signal(sig, SIG_DFL); - - /* Clean up */ - ioctl(0, TIOCNOTTY, 0); - close(STDIN_FILENO); - close(STDOUT_FILENO); - close(STDERR_FILENO); - setsid(); - - /* We want to check the board if exist UART? , add by honor 2003-12-04 */ - if ((fd = open("/dev/console", O_RDWR)) < 0) { - (void) open("/dev/null", O_RDONLY); - (void) open("/dev/null", O_WRONLY); - (void) open("/dev/null", O_WRONLY); - } - else{ - close(fd); - (void) open("/dev/console", O_RDONLY); - (void) open("/dev/console", O_WRONLY); - (void) open("/dev/console", O_WRONLY); - } - - /* Redirect stdout to */ - if (path) { - flags = O_WRONLY | O_CREAT; - if (!strncmp(path, ">>", 2)) { - /* append to */ - flags |= O_APPEND; - path += 2; - } else if (!strncmp(path, ">", 1)) { - /* overwrite */ - flags |= O_TRUNC; - path += 1; - } - if ((fd = open(path, flags, 0644)) < 0) - perror(path); - else { - dup2(fd, STDOUT_FILENO); - close(fd); - } - } - - /* execute command */ - for(i=0 ; argv[i] ; i++) - snprintf(buf+strlen(buf), sizeof(buf), "%s ", argv[i]); - dprintf("cmd=[%s]\n", buf); - setenv("PATH", "/sbin:/bin:/usr/sbin:/usr/bin", 1); - alarm(timeout); - execvp(argv[0], argv); - perror(argv[0]); - exit(errno); - default: /* parent */ - if (ppid) { - *ppid = pid; - return 0; - } else { - waitpid(pid, &status, 0); - if (WIFEXITED(status)) - return WEXITSTATUS(status); - else - return status; - } - } -} - -/* - * Concatenates NULL-terminated list of arguments into a single - * commmand and executes it - * @param argv argument list - * @return stdout of executed command or NULL if an error occurred - */ -char * -_backtick(char *const argv[]) -{ - int filedes[2]; - pid_t pid; - int status; - char *buf = NULL; - - /* create pipe */ - if (pipe(filedes) == -1) { - perror(argv[0]); - return NULL; - } - - switch (pid = fork()) { - case -1: /* error */ - return NULL; - case 0: /* child */ - close(filedes[0]); /* close read end of pipe */ - dup2(filedes[1], 1); /* redirect stdout to write end of pipe */ - close(filedes[1]); /* close write end of pipe */ - execvp(argv[0], argv); - exit(errno); - break; - default: /* parent */ - close(filedes[1]); /* close write end of pipe */ - buf = fd2str(filedes[0]); - waitpid(pid, &status, 0); - break; - } - - return buf; -} - -/* - * Kills process whose PID is stored in plaintext in pidfile - * @param pidfile PID file - * @return 0 on success and errno on failure - */ -int -kill_pidfile(char *pidfile) -{ - FILE *fp = fopen(pidfile, "r"); - char buf[256]; - - if (fp && fgets(buf, sizeof(buf), fp)) { - pid_t pid = strtoul(buf, NULL, 0); - fclose(fp); - return kill(pid, SIGTERM); - } else - return errno; -} - -/* - * fread() with automatic retry on syscall interrupt - * @param ptr location to store to - * @param size size of each element of data - * @param nmemb number of elements - * @param stream file stream - * @return number of items successfully read - */ -int -safe_fread(void *ptr, size_t size, size_t nmemb, FILE *stream) -{ - size_t ret = 0; - - do { - clearerr(stream); - ret += fread((char *)ptr + (ret * size), size, nmemb - ret, stream); - } while (ret < nmemb && ferror(stream) && errno == EINTR); - - return ret; -} - -/* - * fwrite() with automatic retry on syscall interrupt - * @param ptr location to read from - * @param size size of each element of data - * @param nmemb number of elements - * @param stream file stream - * @return number of items successfully written - */ -int -safe_fwrite(const void *ptr, size_t size, size_t nmemb, FILE *stream) -{ - size_t ret = 0; - - do { - clearerr(stream); - ret += fwrite((char *)ptr + (ret * size), size, nmemb - ret, stream); - } while (ret < nmemb && ferror(stream) && errno == EINTR); - - return ret; -} - -/* - * Convert Ethernet address string representation to binary data - * @param a string in xx:xx:xx:xx:xx:xx notation - * @param e binary data - * @return TRUE if conversion was successful and FALSE otherwise - */ -int -ether_atoe(const char *a, unsigned char *e) -{ - char *c = (char *) a; - int i = 0; - - memset(e, 0, ETHER_ADDR_LEN); - for (;;) { - e[i++] = (unsigned char) strtoul(c, &c, 16); - if (!*c++ || i == ETHER_ADDR_LEN) - break; - } - return (i == ETHER_ADDR_LEN); -} - -/* - * Convert Ethernet address binary data to string representation - * @param e binary data - * @param a string in xx:xx:xx:xx:xx:xx notation - * @return a - */ -char * -ether_etoa(const unsigned char *e, char *a) -{ - char *c = a; - int i; - - for (i = 0; i < ETHER_ADDR_LEN; i++) { - if (i) - *c++ = ':'; - c += sprintf(c, "%02X", e[i] & 0xff); - } - return a; -} diff --git a/openwrt/target/linux/package/nvram/src/wl.c b/openwrt/target/linux/package/nvram/src/wl.c deleted file mode 100644 index f09317ad06..0000000000 --- a/openwrt/target/linux/package/nvram/src/wl.c +++ /dev/null @@ -1,86 +0,0 @@ -/* - * Wireless network adapter utilities - * - * Copyright 2004, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - * - * $Id$ - */ -#include - -#include -#include - -int -wl_probe(char *name) -{ - int ret, val; - - /* Check interface */ - if ((ret = wl_ioctl(name, WLC_GET_MAGIC, &val, sizeof(val)))) - return ret; - if (val != WLC_IOCTL_MAGIC) - return -1; - if ((ret = wl_ioctl(name, WLC_GET_VERSION, &val, sizeof(val)))) - return ret; - if (val > WLC_IOCTL_VERSION) - return -1; - - return ret; -} - -int -wl_set_val(char *name, char *var, void *val, int len) -{ - char buf[128]; - int buf_len; - - /* check for overflow */ - if ((buf_len = strlen(var)) + 1 + len > sizeof(buf)) - return -1; - - strcpy(buf, var); - buf_len += 1; - - /* append int value onto the end of the name string */ - memcpy(&buf[buf_len], val, len); - buf_len += len; - - return wl_ioctl(name, WLC_SET_VAR, buf, buf_len); -} - -int -wl_get_val(char *name, char *var, void *val, int len) -{ - char buf[128]; - int ret; - - /* check for overflow */ - if (strlen(var) + 1 > sizeof(buf) || len > sizeof(buf)) - return -1; - - strcpy(buf, var); - if ((ret = wl_ioctl(name, WLC_GET_VAR, buf, sizeof(buf)))) - return ret; - - memcpy(val, buf, len); - return 0; -} - -int -wl_set_int(char *name, char *var, int val) -{ - return wl_set_val(name, var, &val, sizeof(val)); -} - -int -wl_get_int(char *name, char *var, int *val) -{ - return wl_get_val(name, var, val, sizeof(*val)); -} - diff --git a/openwrt/target/linux/package/nvram/src/wl_linux.c b/openwrt/target/linux/package/nvram/src/wl_linux.c deleted file mode 100644 index 126a40b4b3..0000000000 --- a/openwrt/target/linux/package/nvram/src/wl_linux.c +++ /dev/null @@ -1,77 +0,0 @@ -/* - * Wireless network adapter utilities (linux-specific) - * - * Copyright 2004, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - * - * $Id$ - */ - -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -int -wl_ioctl(char *name, int cmd, void *buf, int len) -{ - struct ifreq ifr; - wl_ioctl_t ioc; - int ret = 0; - int s; - - /* open socket to kernel */ - if ((s = socket(AF_INET, SOCK_DGRAM, 0)) < 0) { - perror("socket"); - return errno; - } - - /* do it */ - ioc.cmd = cmd; - ioc.buf = buf; - ioc.len = len; - strncpy(ifr.ifr_name, name, IFNAMSIZ); - ifr.ifr_data = (caddr_t) &ioc; - if ((ret = ioctl(s, SIOCDEVPRIVATE, &ifr)) < 0) - if (cmd != WLC_GET_MAGIC) - perror(ifr.ifr_name); - - /* cleanup */ - close(s); - return ret; -} - -int -wl_hwaddr(char *name, unsigned char *hwaddr) -{ - struct ifreq ifr; - int ret = 0; - int s; - - /* open socket to kernel */ - if ((s = socket(AF_INET, SOCK_DGRAM, 0)) < 0) { - perror("socket"); - return errno; - } - - /* do it */ - strncpy(ifr.ifr_name, name, IFNAMSIZ); - if ((ret = ioctl(s, SIOCGIFHWADDR, &ifr)) == 0) - memcpy(hwaddr, ifr.ifr_hwaddr.sa_data, ETHER_ADDR_LEN); - - /* cleanup */ - close(s); - return ret; -} - diff --git a/openwrt/target/linux/package/openwrt/Makefile b/openwrt/target/linux/package/openwrt/Makefile index 5d2ea199ec..75053b1485 100644 --- a/openwrt/target/linux/package/openwrt/Makefile +++ b/openwrt/target/linux/package/openwrt/Makefile @@ -4,12 +4,12 @@ include $(TOPDIR)/rules.mk PKG_NAME := base-files-arch PKG_RELEASE := 1 -PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME) +PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)-$(BOARD) include $(TOPDIR)/package/rules.mk -BR2_PACKAGE_OPENWRT:=y # ignore menuconfig -$(eval $(call PKG_template,OPENWRT,$(PKG_NAME),$(PKG_VERSION)-$(PKG_RELEASE),$(ARCH))) +IDIR_OPENWRT:=$(PKG_BUILD_DIR)/ipkg +IPKG_OPENWRT:=$(PACKAGE_DIR)/base-files-$(BOARD)_$(PKG_RELEASE)_$(ARCH).ipk $(PKG_BUILD_DIR)/.prepared: mkdir -p $(PKG_BUILD_DIR) @@ -30,8 +30,12 @@ endif $(PKG_BUILD_DIR)/.built: touch $@ + +$(IDIR_OPENWRT): + $(SCRIPT_DIR)/make-ipkg-dir.sh $(IDIR_OPENWRT) ipkg/base-files-arch.control $(PKG_RELEASE) $(ARCH) + $(SED) s,base-files-arch,base-files-$(BOARD),g $(IDIR_OPENWRT)/CONTROL/control -$(IPKG_OPENWRT): +$(IPKG_OPENWRT): mkdir -p $(IDIR_OPENWRT)/etc cp files/network.overrides.$(BOARD) $(IDIR_OPENWRT)/etc/network.overrides $(RSTRIP) $(IDIR_OPENWRT) diff --git a/openwrt/target/linux/package/wificonf/Config.in b/openwrt/target/linux/package/wificonf/Config.in deleted file mode 100644 index c346f5fd36..0000000000 --- a/openwrt/target/linux/package/wificonf/Config.in +++ /dev/null @@ -1,5 +0,0 @@ -config BR2_PACKAGE_WIFICONF - tristate "wificonf - replacement utility for wlconf" - default y - help - Replacement utility for wlconf diff --git a/openwrt/target/linux/package/wificonf/Makefile b/openwrt/target/linux/package/wificonf/Makefile deleted file mode 100644 index aa03683a10..0000000000 --- a/openwrt/target/linux/package/wificonf/Makefile +++ /dev/null @@ -1,29 +0,0 @@ -# $Id$ - -include $(TOPDIR)/rules.mk - -PKG_NAME:=wificonf -PKG_RELEASE:=1 - -PKG_BUILD_DIR:=$(BUILD_DIR)/wificonf - -include $(TOPDIR)/package/rules.mk - - - - -$(eval $(call PKG_template,WIFICONF,$(PKG_NAME),$(PKG_RELEASE),$(ARCH))) - -$(PKG_BUILD_DIR)/.prepared: - mkdir -p $@ - touch $@ - -$(PKG_BUILD_DIR)/.built: - $(TARGET_CC) $(TARGET_CFLAGS) -I$(STAGING_DIR)/usr/include -o $(PKG_BUILD_DIR)/wifi wificonf.c -L$(STAGING_DIR)/usr/lib -lnvram -lshared $(STAGING_DIR)/usr/lib/libiw.so - touch $@ - -$(IPKG_WIFICONF): - install -d -m0755 $(IDIR_WIFICONF)/sbin - install -m0755 $(PKG_BUILD_DIR)/wifi $(IDIR_WIFICONF)/sbin/ - $(RSTRIP) $(IDIR_WIFICONF) - $(IPKG_BUILD) $(IDIR_WIFICONF) $(PACKAGE_DIR) diff --git a/openwrt/target/linux/package/wificonf/ipkg/wificonf.control b/openwrt/target/linux/package/wificonf/ipkg/wificonf.control deleted file mode 100644 index 78e8097c4a..0000000000 --- a/openwrt/target/linux/package/wificonf/ipkg/wificonf.control +++ /dev/null @@ -1,6 +0,0 @@ -Package: wificonf -Priority: optional -Section: net -Maintainer: Felix Fietkau -Source: buildroot internal -Description: Replacement utility for wlconf diff --git a/openwrt/target/linux/package/wificonf/wificonf.c b/openwrt/target/linux/package/wificonf/wificonf.c deleted file mode 100644 index 24a9c2fe11..0000000000 --- a/openwrt/target/linux/package/wificonf/wificonf.c +++ /dev/null @@ -1,495 +0,0 @@ -/* - * Wireless Network Adapter configuration utility - * - * Copyright (C) 2005 Felix Fietkau - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include - -/*------------------------------------------------------------------*/ -/* - * Macro to handle errors when setting WE - * Print a nice error message and exit... - * We define them as macro so that "return" do the right thing. - * The "do {...} while(0)" is a standard trick - */ -#define ERR_SET_EXT(rname, request) \ - fprintf(stderr, "Error for wireless request \"%s\" (%X) :\n", \ - rname, request) - -#define ABORT_ARG_NUM(rname, request) \ - do { \ - ERR_SET_EXT(rname, request); \ - fprintf(stderr, " too few arguments.\n"); \ - } while(0) - -#define ABORT_ARG_TYPE(rname, request, arg) \ - do { \ - ERR_SET_EXT(rname, request); \ - fprintf(stderr, " invalid argument \"%s\".\n", arg); \ - } while(0) - -#define ABORT_ARG_SIZE(rname, request, max) \ - do { \ - ERR_SET_EXT(rname, request); \ - fprintf(stderr, " argument too big (max %d)\n", max); \ - } while(0) - -/*------------------------------------------------------------------*/ -/* - * Wrapper to push some Wireless Parameter in the driver - * Use standard wrapper and add pretty error message if fail... - */ -#define IW_SET_EXT_ERR(skfd, ifname, request, wrq, rname) \ - do { \ - if(iw_set_ext(skfd, ifname, request, wrq) < 0) { \ - ERR_SET_EXT(rname, request); \ - fprintf(stderr, " SET failed on device %-1.16s ; %s.\n", \ - ifname, strerror(errno)); \ - } } while(0) - -/*------------------------------------------------------------------*/ -/* - * Wrapper to extract some Wireless Parameter out of the driver - * Use standard wrapper and add pretty error message if fail... - */ -#define IW_GET_EXT_ERR(skfd, ifname, request, wrq, rname) \ - do { \ - if(iw_get_ext(skfd, ifname, request, wrq) < 0) { \ - ERR_SET_EXT(rname, request); \ - fprintf(stderr, " GET failed on device %-1.16s ; %s.\n", \ - ifname, strerror(errno)); \ - } } while(0) - -void set_wext_ssid(int skfd, char *ifname); - -char *prefix; -char buffer[128]; - -char *wl_var(char *name) -{ - strcpy(buffer, prefix); - strcat(buffer, name); -} - -int nvram_enabled(char *name) -{ - return (nvram_match(name, "1") || nvram_match(name, "on") || nvram_match(name, "enabled") || nvram_match(name, "true") || nvram_match(name, "yes") ? 1 : 0); -} - -int nvram_disabled(char *name) -{ - return (nvram_match(name, "0") || nvram_match(name, "off") || nvram_match(name, "disabled") || nvram_match(name, "false") || nvram_match(name, "no") ? 1 : 0); -} - - -int bcom_ioctl(int skfd, char *ifname, int cmd, void *buf, int len) -{ - struct ifreq ifr; - wl_ioctl_t ioc; - int ret; - - ioc.cmd = cmd; - ioc.buf = buf; - ioc.len = len; - - ifr.ifr_data = (caddr_t) &ioc; - strncpy(ifr.ifr_name, ifname, IFNAMSIZ); - - ret = ioctl(skfd, SIOCDEVPRIVATE, &ifr); - - return ret; -} - -int bcom_set_val(int skfd, char *ifname, char *var, void *val, int len) -{ - char buf[8192]; - int ret; - - if (strlen(var) + 1 > sizeof(buf) || len > sizeof(buf)) - return -1; - - strcpy(buf, var); - - if ((ret = bcom_ioctl(skfd, ifname, WLC_GET_VAR, buf, sizeof(buf)))) - return ret; - - memcpy(val, buf, len); - return 0; -} - -int bcom_set_int(int skfd, char *ifname, char *var, int val) -{ - return bcom_set_val(skfd, ifname, var, &val, sizeof(val)); -} - -void stop_bcom(int skfd, char *ifname) -{ - int val = 0; - wlc_ssid_t ssid; - - if (bcom_ioctl(skfd, ifname, WLC_GET_MAGIC, &val, sizeof(val)) < 0) - return; - - ssid.SSID_len = 0; - ssid.SSID[0] = 0; - bcom_ioctl(skfd, ifname, WLC_SET_SSID, &ssid, sizeof(ssid)); - bcom_ioctl(skfd, ifname, WLC_DOWN, NULL, 0); - -} - -void start_bcom(int skfd, char *ifname) -{ - int val = 0; - - if (bcom_ioctl(skfd, ifname, WLC_GET_MAGIC, &val, sizeof(val)) < 0) - return; - - bcom_ioctl(skfd, ifname, WLC_UP, &val, sizeof(val)); - set_wext_ssid(skfd, ifname); -} - - -void setup_bcom(int skfd, char *ifname) -{ - int val = 0; - char buf[8192]; - char wbuf[80]; - char *v; - - if (bcom_ioctl(skfd, ifname, WLC_GET_MAGIC, &val, sizeof(val)) < 0) - return; - - stop_bcom(skfd, ifname); - - /* Set Country */ - strncpy(buf, nvram_safe_get(wl_var("country_code")), 4); - buf[3] = 0; - bcom_ioctl(skfd, ifname, 273, buf, 4); - - /* Set up afterburner */ - val = ABO_AUTO; - if (nvram_enabled(wl_var("afterburner"))) - val = ABO_ON; - if (nvram_disabled(wl_var("afterburner"))) - val = ABO_OFF; - bcom_set_val(skfd, ifname, "afterburner_override", &val, sizeof(val)); - - /* Set other options */ - if (v = nvram_get(wl_var("lazywds"))) { - val = atoi(v); - bcom_ioctl(skfd, ifname, WLC_SET_LAZYWDS, &val, sizeof(val)); - } - if (v = nvram_get(wl_var("frag"))) { - val = atoi(v); - bcom_ioctl(skfd, ifname, WLC_SET_FRAG, &val, sizeof(val)); - } - if (v = nvram_get(wl_var("dtim"))) { - val = atoi(v); - bcom_ioctl(skfd, ifname, WLC_SET_DTIMPRD, &val, sizeof(val)); - } - if (v = nvram_get(wl_var("bcn"))) { - val = atoi(v); - bcom_ioctl(skfd, ifname, WLC_SET_BCNPRD, &val, sizeof(val)); - } - if (v = nvram_get(wl_var("rts"))) { - val = atoi(v); - bcom_ioctl(skfd, ifname, WLC_SET_RTS, &val, sizeof(val)); - } - if (v = nvram_get(wl_var("antdiv"))) { - val = atoi(v); - bcom_ioctl(skfd, ifname, WLC_SET_ANTDIV, &val, sizeof(val)); - } - if (v = nvram_get(wl_var("txant"))) { - val = atoi(v); - bcom_ioctl(skfd, ifname, WLC_SET_TXANT, &val, sizeof(val)); - } - - val = nvram_enabled(wl_var("closed")); - bcom_ioctl(skfd, ifname, WLC_SET_CLOSED, &val, sizeof(val)); - - val = nvram_enabled(wl_var("ap_isolate")); - bcom_set_int(skfd, ifname, "ap_isolate", val); - - val = nvram_enabled(wl_var("frameburst")); - bcom_ioctl(skfd, ifname, WLC_SET_FAKEFRAG, &val, sizeof(val)); - - /* Set up MAC list */ - if (nvram_match(wl_var("macmode"), "allow")) - val = WLC_MACMODE_ALLOW; - else if (nvram_match(wl_var("macmode"), "deny")) - val = WLC_MACMODE_DENY; - else - val = WLC_MACMODE_DISABLED; - - if ((val != WLC_MACMODE_DISABLED) && (v = nvram_get(wl_var("maclist")))) { - struct maclist *mac_list; - struct ether_addr *addr; - char *next; - - memset(buf, 0, 8192); - mac_list = (struct maclist *) buf; - addr = mac_list->ea; - - foreach(wbuf, v, next) { - if (ether_atoe(wbuf, addr->ether_addr_octet)) { - mac_list->count++; - addr++; - } - } - bcom_ioctl(skfd, ifname, WLC_SET_MACLIST, buf, sizeof(buf)); - } else { - val = WLC_MACMODE_DISABLED; - } - bcom_ioctl(skfd, ifname, WLC_SET_MACMODE, &val, sizeof(val)); - - if (v = nvram_get(wl_var("wds"))) { - struct maclist *wdslist = (struct maclist *) buf; - struct ether_addr *addr = wdslist->ea; - char *next; - - memset(buf, 0, 8192); - foreach(wbuf, v, next) { - if (ether_atoe(wbuf, addr->ether_addr_octet)) { - wdslist->count++; - addr++; - } - } - bcom_ioctl(skfd, ifname, WLC_SET_WDSLIST, buf, sizeof(buf)); - } - - /* Set up G mode */ - bcom_ioctl(skfd, ifname, WLC_GET_PHYTYPE, &val, sizeof(val)); - if (val == 2) { - int override = WLC_G_PROTECTION_OFF; - int control = WLC_G_PROTECTION_CTL_OFF; - - if (v = nvram_get(wl_var("gmode"))) - val = atoi(v); - else - val = 1; - - if (val > 5) - val = 1; - - bcom_ioctl(skfd, ifname, WLC_SET_GMODE, &val, sizeof(val)); - - if (nvram_match(wl_var("gmode_protection"), "auto")) { - override = WLC_G_PROTECTION_AUTO; - control = WLC_G_PROTECTION_CTL_OVERLAP; - } - if (nvram_enabled(wl_var("gmode_protection"))) { - override = WLC_G_PROTECTION_ON; - control = WLC_G_PROTECTION_CTL_OVERLAP; - } - bcom_ioctl(skfd, ifname, WLC_SET_GMODE_PROTECTION_CONTROL, &override, sizeof(control)); - bcom_ioctl(skfd, ifname, WLC_SET_GMODE_PROTECTION_OVERRIDE, &override, sizeof(override)); - - if (val = 0) { - if (nvram_match(wl_var("plcphdr"), "long")) - val = WLC_PLCP_AUTO; - else - val = WLC_PLCP_SHORT; - - bcom_ioctl(skfd, ifname, WLC_SET_PLCPHDR, &val, sizeof(val)); - } - } - - start_bcom(skfd, ifname); - - if (!(v = nvram_get(wl_var("akm")))) - v = nvram_safe_get(wl_var("auth_mode")); - - if (strstr(v, "wpa") || strstr(v, "psk")) { - /* Set up WPA */ - if (nvram_match(wl_var("crypto"), "tkip")) - val = TKIP_ENABLED; - else if (nvram_match(wl_var("crypto"), "aes")) - val = AES_ENABLED; - else if (nvram_match(wl_var("crypto"), "tkip+aes")) - val = TKIP_ENABLED | AES_ENABLED; - else - val = 0; - bcom_ioctl(skfd, ifname, WLC_SET_WSEC, &val, sizeof(val)); - - if (val && strstr(v, "psk")) { - v = nvram_safe_get(wl_var("wpa_psk")); - - if ((strlen(v) >= 8) && (strlen(v) < 63)) { - val = 4; - bcom_ioctl(skfd, ifname, WLC_SET_WPA_AUTH, &val, sizeof(val)); - - bcom_ioctl(skfd, ifname, WLC_GET_AP, &val, sizeof(val)); - if (!val) { - /* Enable in-driver WPA supplicant */ - wsec_pmk_t pmk; - - pmk.key_len = (unsigned short) strlen(v); - pmk.flags = WSEC_PASSPHRASE; - strcpy(pmk.key, v); - bcom_ioctl(skfd, ifname, WLC_SET_WSEC_PMK, &pmk, sizeof(pmk)); - bcom_set_int(skfd, ifname, "sup_wpa", 1); - } - } - } else { - val = 1; - bcom_ioctl(skfd, ifname, WLC_SET_EAP_RESTRICT, &val, sizeof(val)); - } - } else { - val = 0; - - bcom_ioctl(skfd, ifname, WLC_SET_WSEC, &val, sizeof(val)); - bcom_ioctl(skfd, ifname, WLC_SET_WPA_AUTH, &val, sizeof(val)); - } - - -} - -void set_wext_ssid(int skfd, char *ifname) -{ - char *buffer; - struct iwreq wrq; - - if (buffer = nvram_get(wl_var("ssid"))) { - if (strlen(buffer) > IW_ESSID_MAX_SIZE) { - ABORT_ARG_SIZE("Set ESSID", SIOCSIWESSID, IW_ESSID_MAX_SIZE); - } else { - char essid[IW_ESSID_MAX_SIZE + 1]; - - wrq.u.essid.flags = 1; - strcpy(essid, buffer); - wrq.u.essid.pointer = (caddr_t) essid; - wrq.u.essid.length = strlen(essid) + 1; - IW_SET_EXT_ERR(skfd, ifname, SIOCSIWESSID, &wrq, "Set ESSID"); - } - } -} -void setup_wext_wep(int skfd, char *ifname) -{ - int i, keylen; - struct iwreq wrq; - char keystr[5]; - char *keyval; - unsigned char key[IW_ENCODING_TOKEN_MAX]; - - strcpy(keystr, "key1"); - for (i = 1; i <= 4; i++) { - if (keyval = nvram_get(wl_var(keystr))) { - keylen = iw_in_key(keyval, key); - - if (keylen > 0) { - wrq.u.data.length = keylen; - wrq.u.data.pointer = (caddr_t) key; - wrq.u.data.flags = i; - IW_SET_EXT_ERR(skfd, ifname, SIOCSIWENCODE, &wrq, "Set Encode"); - } - } - keystr[3]++; - } - - - i = atoi(nvram_safe_get(wl_var("key"))); - if (i > 0 && i < 4) { - wrq.u.data.flags = i | IW_ENCODE_RESTRICTED; - IW_SET_EXT_ERR(skfd, ifname, SIOCSIWENCODE, &wrq, "Set Encode"); - } -} - -void set_wext_mode(skfd, ifname) -{ - struct iwreq wrq; - int ap = 0, infra = 0, wet = 0; - - /* Set operation mode */ - ap = !nvram_match(wl_var("mode"), "sta"); - infra = !nvram_disabled(wl_var("infra")); - wet = nvram_enabled(wl_var("wet")); - - wrq.u.mode = (!infra ? IW_MODE_ADHOC : (ap ? IW_MODE_MASTER : (wet ? IW_MODE_REPEAT : IW_MODE_INFRA))); - IW_SET_EXT_ERR(skfd, ifname, SIOCSIWMODE, &wrq, "Set Mode"); -} - -void setup_wext(int skfd, char *ifname) -{ - char *buffer; - struct iwreq wrq; - - /* Set channel */ - int channel = atoi(nvram_safe_get(wl_var("channel"))); - - wrq.u.freq.m = -1; - wrq.u.freq.e = 0; - wrq.u.freq.flags = 0; - - if (channel > 0) { - wrq.u.freq.flags = IW_FREQ_FIXED; - wrq.u.freq.m = channel; - IW_SET_EXT_ERR(skfd, ifname, SIOCSIWFREQ, &wrq, "Set Frequency"); - } - - - /* Disable radio if wlX_radio is set and not enabled */ - wrq.u.txpower.disabled = nvram_disabled(wl_var("radio")); - - wrq.u.txpower.value = -1; - wrq.u.txpower.fixed = 1; - wrq.u.txpower.flags = IW_TXPOW_DBM; - IW_SET_EXT_ERR(skfd, ifname, SIOCSIWTXPOW, &wrq, "Set Tx Power"); - - /* Set up WEP */ - if (nvram_enabled(wl_var("wep"))) - setup_wext_wep(skfd, ifname); - - /* Set ESSID */ - set_wext_ssid(skfd, ifname); - -} - - -static int setup_interfaces(int skfd, char *ifname, char *args[], int count) -{ - struct iwreq wrq; - int rc; - - /* Avoid "Unused parameter" warning */ - args = args; count = count; - - if(iw_get_ext(skfd, ifname, SIOCGIWNAME, &wrq) < 0) - return 0; - - stop_bcom(skfd, ifname); - set_wext_mode(skfd, ifname); - setup_bcom(skfd, ifname); - setup_wext(skfd, ifname); - - prefix[2]++; -} - -int main(int argc, char **argv) -{ - int skfd; - if((skfd = iw_sockets_open()) < 0) { - perror("socket"); - exit(-1); - } - - prefix = strdup("wl0_"); - iw_enum_devices(skfd, &setup_interfaces, NULL, 0); - - return 0; -}