From: Daniel Golle Date: Sun, 10 Dec 2023 01:15:36 +0000 (+0000) Subject: kernel: hack: support inverted LEDs on MaxLinear GPY211 PHY X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=90fbec8;p=openwrt%2Fstaging%2Fblogic.git kernel: hack: support inverted LEDs on MaxLinear GPY211 PHY Add downstream DT property to setup the PHY LEDs of the MaxLinear GPY211 PHY in such way that the VDD of the LED is driven by the SoC pin rather than the GND (which is the default). Signed-off-by: Daniel Golle --- diff --git a/target/linux/generic/hack-5.15/765-mxl-gpy-control-LED-reg-from-DT.patch b/target/linux/generic/hack-5.15/765-mxl-gpy-control-LED-reg-from-DT.patch index 8de3668def22..95e9749d9126 100644 --- a/target/linux/generic/hack-5.15/765-mxl-gpy-control-LED-reg-from-DT.patch +++ b/target/linux/generic/hack-5.15/765-mxl-gpy-control-LED-reg-from-DT.patch @@ -55,7 +55,7 @@ Signed-off-by: David Bauer /* SGMII */ #define VSPEC1_SGMII_CTRL 0x08 #define VSPEC1_SGMII_CTRL_ANEN BIT(12) /* Aneg enable */ -@@ -80,6 +87,31 @@ static const struct { +@@ -80,6 +87,35 @@ static const struct { {9, 0x73}, }; @@ -64,6 +64,7 @@ Signed-off-by: David Bauer + struct device_node *node = phydev->mdio.dev.of_node; + u32 led_regs[PHY_LED_NUM_LEDS]; + int i, ret; ++ u16 val = 0xff00; + + if (!IS_ENABLED(CONFIG_OF_MDIO)) + return 0; @@ -71,8 +72,11 @@ Signed-off-by: David Bauer + if (of_property_read_u32_array(node, "mxl,led-config", led_regs, PHY_LED_NUM_LEDS)) + return 0; + ++ if (of_property_read_bool(node, "mxl,led-drive-vdd")) ++ val &= 0x0fff; ++ + /* Enable LED function handling on all ports*/ -+ phy_write(phydev, PHY_LED, 0xFF00); ++ phy_write(phydev, PHY_LED, val); + + /* Write LED register values */ + for (i = 0; i < PHY_LED_NUM_LEDS; i++) { @@ -87,7 +91,7 @@ Signed-off-by: David Bauer static int gpy_config_init(struct phy_device *phydev) { int ret; -@@ -91,7 +123,10 @@ static int gpy_config_init(struct phy_de +@@ -91,7 +127,10 @@ static int gpy_config_init(struct phy_de /* Clear all pending interrupts */ ret = phy_read(phydev, PHY_ISTAT); diff --git a/target/linux/generic/hack-6.1/765-mxl-gpy-control-LED-reg-from-DT.patch b/target/linux/generic/hack-6.1/765-mxl-gpy-control-LED-reg-from-DT.patch index d7165cb30ac7..2724efa15eb5 100644 --- a/target/linux/generic/hack-6.1/765-mxl-gpy-control-LED-reg-from-DT.patch +++ b/target/linux/generic/hack-6.1/765-mxl-gpy-control-LED-reg-from-DT.patch @@ -55,7 +55,7 @@ Signed-off-by: David Bauer /* SGMII */ #define VSPEC1_SGMII_CTRL 0x08 #define VSPEC1_SGMII_CTRL_ANEN BIT(12) /* Aneg enable */ -@@ -241,6 +248,31 @@ out: +@@ -241,6 +248,35 @@ out: return ret; } @@ -64,6 +64,7 @@ Signed-off-by: David Bauer + struct device_node *node = phydev->mdio.dev.of_node; + u32 led_regs[PHY_LED_NUM_LEDS]; + int i, ret; ++ u16 val = 0xff00; + + if (!IS_ENABLED(CONFIG_OF_MDIO)) + return 0; @@ -71,8 +72,11 @@ Signed-off-by: David Bauer + if (of_property_read_u32_array(node, "mxl,led-config", led_regs, PHY_LED_NUM_LEDS)) + return 0; + ++ if (of_property_read_bool(node, "mxl,led-drive-vdd")) ++ val &= 0x0fff; ++ + /* Enable LED function handling on all ports*/ -+ phy_write(phydev, PHY_LED, 0xFF00); ++ phy_write(phydev, PHY_LED, val); + + /* Write LED register values */ + for (i = 0; i < PHY_LED_NUM_LEDS; i++) { @@ -87,7 +91,7 @@ Signed-off-by: David Bauer static int gpy_config_init(struct phy_device *phydev) { int ret; -@@ -252,7 +284,10 @@ static int gpy_config_init(struct phy_de +@@ -252,7 +288,10 @@ static int gpy_config_init(struct phy_de /* Clear all pending interrupts */ ret = phy_read(phydev, PHY_ISTAT); diff --git a/target/linux/mediatek/patches-5.15/732-net-phy-mxl-gpy-don-t-use-SGMII-AN-if-using-phylink.patch b/target/linux/mediatek/patches-5.15/732-net-phy-mxl-gpy-don-t-use-SGMII-AN-if-using-phylink.patch index 598d9d0d2180..6df4436ab9b2 100644 --- a/target/linux/mediatek/patches-5.15/732-net-phy-mxl-gpy-don-t-use-SGMII-AN-if-using-phylink.patch +++ b/target/linux/mediatek/patches-5.15/732-net-phy-mxl-gpy-don-t-use-SGMII-AN-if-using-phylink.patch @@ -14,7 +14,7 @@ Signed-off-by: Daniel Golle --- a/drivers/net/phy/mxl-gpy.c +++ b/drivers/net/phy/mxl-gpy.c -@@ -191,8 +191,11 @@ static bool gpy_2500basex_chk(struct phy +@@ -195,8 +195,11 @@ static bool gpy_2500basex_chk(struct phy phydev->speed = SPEED_2500; phydev->interface = PHY_INTERFACE_MODE_2500BASEX; @@ -28,7 +28,7 @@ Signed-off-by: Daniel Golle return true; } -@@ -216,6 +219,14 @@ static int gpy_config_aneg(struct phy_de +@@ -220,6 +223,14 @@ static int gpy_config_aneg(struct phy_de u32 adv; int ret; @@ -43,7 +43,7 @@ Signed-off-by: Daniel Golle if (phydev->autoneg == AUTONEG_DISABLE) { /* Configure half duplex with genphy_setup_forced, * because genphy_c45_pma_setup_forced does not support. -@@ -306,6 +317,8 @@ static void gpy_update_interface(struct +@@ -310,6 +321,8 @@ static void gpy_update_interface(struct switch (phydev->speed) { case SPEED_2500: phydev->interface = PHY_INTERFACE_MODE_2500BASEX; @@ -52,7 +52,7 @@ Signed-off-by: Daniel Golle ret = phy_modify_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_SGMII_CTRL, VSPEC1_SGMII_CTRL_ANEN, 0); if (ret < 0) -@@ -317,7 +330,7 @@ static void gpy_update_interface(struct +@@ -321,7 +334,7 @@ static void gpy_update_interface(struct case SPEED_100: case SPEED_10: phydev->interface = PHY_INTERFACE_MODE_SGMII; diff --git a/target/linux/mediatek/patches-6.1/732-net-phy-mxl-gpy-don-t-use-SGMII-AN-if-using-phylink.patch b/target/linux/mediatek/patches-6.1/732-net-phy-mxl-gpy-don-t-use-SGMII-AN-if-using-phylink.patch index d74572737129..76d8b0ef008f 100644 --- a/target/linux/mediatek/patches-6.1/732-net-phy-mxl-gpy-don-t-use-SGMII-AN-if-using-phylink.patch +++ b/target/linux/mediatek/patches-6.1/732-net-phy-mxl-gpy-don-t-use-SGMII-AN-if-using-phylink.patch @@ -14,7 +14,7 @@ Signed-off-by: Daniel Golle --- a/drivers/net/phy/mxl-gpy.c +++ b/drivers/net/phy/mxl-gpy.c -@@ -367,8 +367,11 @@ static bool gpy_2500basex_chk(struct phy +@@ -371,8 +371,11 @@ static bool gpy_2500basex_chk(struct phy phydev->speed = SPEED_2500; phydev->interface = PHY_INTERFACE_MODE_2500BASEX; @@ -28,7 +28,7 @@ Signed-off-by: Daniel Golle return true; } -@@ -392,6 +395,14 @@ static int gpy_config_aneg(struct phy_de +@@ -396,6 +399,14 @@ static int gpy_config_aneg(struct phy_de u32 adv; int ret; @@ -43,7 +43,7 @@ Signed-off-by: Daniel Golle if (phydev->autoneg == AUTONEG_DISABLE) { /* Configure half duplex with genphy_setup_forced, * because genphy_c45_pma_setup_forced does not support. -@@ -482,6 +493,8 @@ static void gpy_update_interface(struct +@@ -486,6 +497,8 @@ static void gpy_update_interface(struct switch (phydev->speed) { case SPEED_2500: phydev->interface = PHY_INTERFACE_MODE_2500BASEX; @@ -52,7 +52,7 @@ Signed-off-by: Daniel Golle ret = phy_modify_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_SGMII_CTRL, VSPEC1_SGMII_CTRL_ANEN, 0); if (ret < 0) -@@ -493,7 +506,7 @@ static void gpy_update_interface(struct +@@ -497,7 +510,7 @@ static void gpy_update_interface(struct case SPEED_100: case SPEED_10: phydev->interface = PHY_INTERFACE_MODE_SGMII;