From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Date: Wed, 8 Feb 2017 17:31:14 +0000 (+0100)
Subject: serial: sh-sci: fix hardware RX trigger level setting
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=90afa5255f5c5ae67c869918e4c5f60b8580db70;p=openwrt%2Fstaging%2Fblogic.git

serial: sh-sci: fix hardware RX trigger level setting

1. Do not set the RX trigger level for software timeout devices on reset;
there is no timeout by default, and data will rot.
2. Do set the RX trigger level for hardware timeout devices when set
via sysfs attribute.

Fixes SCIFA-type serial consoles.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index f95a56ca936e..9a47cc4f16a2 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -1076,8 +1076,11 @@ static ssize_t rx_trigger_store(struct device *dev,
 
 	if (kstrtol(buf, 0, &r) == -EINVAL)
 		return -EINVAL;
+
 	sci->rx_trigger = scif_set_rtrg(port, r);
-	scif_set_rtrg(port, 1);
+	if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
+		scif_set_rtrg(port, 1);
+
 	return count;
 }
 
@@ -2179,7 +2182,11 @@ static void sci_reset(struct uart_port *port)
 			setup_timer(&s->rx_fifo_timer, rx_fifo_timer_fn,
 				    (unsigned long)s);
 		} else {
-			scif_set_rtrg(port, s->rx_trigger);
+			if (port->type == PORT_SCIFA ||
+			    port->type == PORT_SCIFB)
+				scif_set_rtrg(port, 1);
+			else
+				scif_set_rtrg(port, s->rx_trigger);
 		}
 	}
 }