From: Frank Schaefer Date: Mon, 3 Jun 2013 17:12:02 +0000 (-0300) Subject: [media] em28xx: extend GPIO register definitions for the em25xx, em276x/7x/8x, em2874... X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=907d109bc212bc1193fb01b5c320e8c9a850bbf4;p=openwrt%2Fstaging%2Fblogic.git [media] em28xx: extend GPIO register definitions for the em25xx, em276x/7x/8x, em2874/174/84 The em25xx/em276x/7x/8x provides 4 GPIO register sets, each of them consisting of separate read and a write registers. The same registers are also used by the em2874/174/84. Signed-off-by: Frank Schäfer Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c index e4b0669d49dd..c0b853541f09 100644 --- a/drivers/media/usb/em28xx/em28xx-cards.c +++ b/drivers/media/usb/em28xx/em28xx-cards.c @@ -285,14 +285,14 @@ static struct em28xx_reg_seq dikom_dk300_digital[] = { /* Reset for the most [digital] boards */ static struct em28xx_reg_seq leadership_digital[] = { - {EM2874_R80_GPIO, 0x70, 0xff, 10}, + {EM2874_R80_GPIO_P0_CTRL, 0x70, 0xff, 10}, { -1, -1, -1, -1}, }; static struct em28xx_reg_seq leadership_reset[] = { - {EM2874_R80_GPIO, 0xf0, 0xff, 10}, - {EM2874_R80_GPIO, 0xb0, 0xff, 10}, - {EM2874_R80_GPIO, 0xf0, 0xff, 10}, + {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10}, + {EM2874_R80_GPIO_P0_CTRL, 0xb0, 0xff, 10}, + {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10}, { -1, -1, -1, -1}, }; @@ -301,25 +301,25 @@ static struct em28xx_reg_seq leadership_reset[] = { * GPIO_7 - LED */ static struct em28xx_reg_seq pctv_290e[] = { - {EM2874_R80_GPIO, 0x00, 0xff, 80}, - {EM2874_R80_GPIO, 0x40, 0xff, 80}, /* GPIO_6 = 1 */ - {EM2874_R80_GPIO, 0xc0, 0xff, 80}, /* GPIO_7 = 1 */ + {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 80}, + {EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 80}, /* GPIO_6 = 1 */ + {EM2874_R80_GPIO_P0_CTRL, 0xc0, 0xff, 80}, /* GPIO_7 = 1 */ {-1, -1, -1, -1}, }; #if 0 static struct em28xx_reg_seq terratec_h5_gpio[] = { {EM28XX_R08_GPIO, 0xff, 0xff, 10}, - {EM2874_R80_GPIO, 0xf6, 0xff, 100}, - {EM2874_R80_GPIO, 0xf2, 0xff, 50}, - {EM2874_R80_GPIO, 0xf6, 0xff, 50}, + {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100}, + {EM2874_R80_GPIO_P0_CTRL, 0xf2, 0xff, 50}, + {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 50}, { -1, -1, -1, -1}, }; static struct em28xx_reg_seq terratec_h5_digital[] = { - {EM2874_R80_GPIO, 0xf6, 0xff, 10}, - {EM2874_R80_GPIO, 0xe6, 0xff, 100}, - {EM2874_R80_GPIO, 0xa6, 0xff, 10}, + {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10}, + {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100}, + {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10}, { -1, -1, -1, -1}, }; #endif @@ -335,39 +335,39 @@ static struct em28xx_reg_seq terratec_h5_digital[] = { * GPIO_7 - LED (green LED) */ static struct em28xx_reg_seq pctv_460e[] = { - {EM2874_R80_GPIO, 0x01, 0xff, 50}, + {EM2874_R80_GPIO_P0_CTRL, 0x01, 0xff, 50}, {0x0d, 0xff, 0xff, 50}, - {EM2874_R80_GPIO, 0x41, 0xff, 50}, /* GPIO_6=1 */ + {EM2874_R80_GPIO_P0_CTRL, 0x41, 0xff, 50}, /* GPIO_6=1 */ {0x0d, 0x42, 0xff, 50}, - {EM2874_R80_GPIO, 0x61, 0xff, 50}, /* GPIO_5=1 */ + {EM2874_R80_GPIO_P0_CTRL, 0x61, 0xff, 50}, /* GPIO_5=1 */ { -1, -1, -1, -1}, }; static struct em28xx_reg_seq c3tech_digital_duo_digital[] = { - {EM2874_R80_GPIO, 0xff, 0xff, 10}, - {EM2874_R80_GPIO, 0xfd, 0xff, 10}, /* xc5000 reset */ - {EM2874_R80_GPIO, 0xf9, 0xff, 35}, - {EM2874_R80_GPIO, 0xfd, 0xff, 10}, - {EM2874_R80_GPIO, 0xff, 0xff, 10}, - {EM2874_R80_GPIO, 0xfe, 0xff, 10}, - {EM2874_R80_GPIO, 0xbe, 0xff, 10}, - {EM2874_R80_GPIO, 0xfe, 0xff, 20}, + {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10}, + {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, /* xc5000 reset */ + {EM2874_R80_GPIO_P0_CTRL, 0xf9, 0xff, 35}, + {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, + {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10}, + {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 10}, + {EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 10}, + {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 20}, { -1, -1, -1, -1}, }; #if 0 static struct em28xx_reg_seq hauppauge_930c_gpio[] = { - {EM2874_R80_GPIO, 0x6f, 0xff, 10}, - {EM2874_R80_GPIO, 0x4f, 0xff, 10}, /* xc5000 reset */ - {EM2874_R80_GPIO, 0x6f, 0xff, 10}, - {EM2874_R80_GPIO, 0x4f, 0xff, 10}, + {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10}, + {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10}, /* xc5000 reset */ + {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10}, + {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10}, { -1, -1, -1, -1}, }; static struct em28xx_reg_seq hauppauge_930c_digital[] = { - {EM2874_R80_GPIO, 0xf6, 0xff, 10}, - {EM2874_R80_GPIO, 0xe6, 0xff, 100}, - {EM2874_R80_GPIO, 0xa6, 0xff, 10}, + {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10}, + {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100}, + {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10}, { -1, -1, -1, -1}, }; #endif @@ -378,9 +378,9 @@ static struct em28xx_reg_seq hauppauge_930c_digital[] = { * GPIO_7 - LED, 0=active */ static struct em28xx_reg_seq maxmedia_ub425_tc[] = { - {EM2874_R80_GPIO, 0x83, 0xff, 100}, - {EM2874_R80_GPIO, 0xc3, 0xff, 100}, /* GPIO_6 = 1 */ - {EM2874_R80_GPIO, 0x43, 0xff, 000}, /* GPIO_7 = 0 */ + {EM2874_R80_GPIO_P0_CTRL, 0x83, 0xff, 100}, + {EM2874_R80_GPIO_P0_CTRL, 0xc3, 0xff, 100}, /* GPIO_6 = 1 */ + {EM2874_R80_GPIO_P0_CTRL, 0x43, 0xff, 000}, /* GPIO_7 = 0 */ {-1, -1, -1, -1}, }; @@ -391,9 +391,9 @@ static struct em28xx_reg_seq maxmedia_ub425_tc[] = { * GPIO_7: LED, 1=active */ static struct em28xx_reg_seq pctv_510e[] = { - {EM2874_R80_GPIO, 0x10, 0xff, 100}, - {EM2874_R80_GPIO, 0x14, 0xff, 100}, /* GPIO_2 = 1 */ - {EM2874_R80_GPIO, 0x54, 0xff, 050}, /* GPIO_6 = 1 */ + {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100}, + {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */ + {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */ { -1, -1, -1, -1}, }; @@ -404,10 +404,10 @@ static struct em28xx_reg_seq pctv_510e[] = { * GPIO_7: LED, 1=active */ static struct em28xx_reg_seq pctv_520e[] = { - {EM2874_R80_GPIO, 0x10, 0xff, 100}, - {EM2874_R80_GPIO, 0x14, 0xff, 100}, /* GPIO_2 = 1 */ - {EM2874_R80_GPIO, 0x54, 0xff, 050}, /* GPIO_6 = 1 */ - {EM2874_R80_GPIO, 0xd4, 0xff, 000}, /* GPIO_7 = 1 */ + {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100}, + {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */ + {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */ + {EM2874_R80_GPIO_P0_CTRL, 0xd4, 0xff, 000}, /* GPIO_7 = 1 */ { -1, -1, -1, -1}, }; @@ -2947,13 +2947,13 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev, break; case CHIP_ID_EM2874: chip_name = "em2874"; - dev->reg_gpio_num = EM2874_R80_GPIO; + dev->reg_gpio_num = EM2874_R80_GPIO_P0_CTRL; dev->wait_after_write = 0; dev->eeprom_addrwidth_16bit = 1; break; case CHIP_ID_EM28174: chip_name = "em28174"; - dev->reg_gpio_num = EM2874_R80_GPIO; + dev->reg_gpio_num = EM2874_R80_GPIO_P0_CTRL; dev->wait_after_write = 0; dev->eeprom_addrwidth_16bit = 1; break; @@ -2963,7 +2963,7 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev, break; case CHIP_ID_EM2884: chip_name = "em2884"; - dev->reg_gpio_num = EM2874_R80_GPIO; + dev->reg_gpio_num = EM2874_R80_GPIO_P0_CTRL; dev->wait_after_write = 0; dev->eeprom_addrwidth_16bit = 1; break; diff --git a/drivers/media/usb/em28xx/em28xx-dvb.c b/drivers/media/usb/em28xx/em28xx-dvb.c index 42ede686ab69..69aed825f583 100644 --- a/drivers/media/usb/em28xx/em28xx-dvb.c +++ b/drivers/media/usb/em28xx/em28xx-dvb.c @@ -421,23 +421,23 @@ static void hauppauge_hvr930c_init(struct em28xx *dev) int i; struct em28xx_reg_seq hauppauge_hvr930c_init[] = { - {EM2874_R80_GPIO, 0xff, 0xff, 0x65}, - {EM2874_R80_GPIO, 0xfb, 0xff, 0x32}, - {EM2874_R80_GPIO, 0xff, 0xff, 0xb8}, + {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0x65}, + {EM2874_R80_GPIO_P0_CTRL, 0xfb, 0xff, 0x32}, + {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0xb8}, { -1, -1, -1, -1}, }; struct em28xx_reg_seq hauppauge_hvr930c_end[] = { - {EM2874_R80_GPIO, 0xef, 0xff, 0x01}, - {EM2874_R80_GPIO, 0xaf, 0xff, 0x65}, - {EM2874_R80_GPIO, 0xef, 0xff, 0x76}, - {EM2874_R80_GPIO, 0xef, 0xff, 0x01}, - {EM2874_R80_GPIO, 0xcf, 0xff, 0x0b}, - {EM2874_R80_GPIO, 0xef, 0xff, 0x40}, - - {EM2874_R80_GPIO, 0xcf, 0xff, 0x65}, - {EM2874_R80_GPIO, 0xef, 0xff, 0x65}, - {EM2874_R80_GPIO, 0xcf, 0xff, 0x0b}, - {EM2874_R80_GPIO, 0xef, 0xff, 0x65}, + {EM2874_R80_GPIO_P0_CTRL, 0xef, 0xff, 0x01}, + {EM2874_R80_GPIO_P0_CTRL, 0xaf, 0xff, 0x65}, + {EM2874_R80_GPIO_P0_CTRL, 0xef, 0xff, 0x76}, + {EM2874_R80_GPIO_P0_CTRL, 0xef, 0xff, 0x01}, + {EM2874_R80_GPIO_P0_CTRL, 0xcf, 0xff, 0x0b}, + {EM2874_R80_GPIO_P0_CTRL, 0xef, 0xff, 0x40}, + + {EM2874_R80_GPIO_P0_CTRL, 0xcf, 0xff, 0x65}, + {EM2874_R80_GPIO_P0_CTRL, 0xef, 0xff, 0x65}, + {EM2874_R80_GPIO_P0_CTRL, 0xcf, 0xff, 0x0b}, + {EM2874_R80_GPIO_P0_CTRL, 0xef, 0xff, 0x65}, { -1, -1, -1, -1}, }; @@ -488,15 +488,15 @@ static void terratec_h5_init(struct em28xx *dev) int i; struct em28xx_reg_seq terratec_h5_init[] = { {EM28XX_R08_GPIO, 0xff, 0xff, 10}, - {EM2874_R80_GPIO, 0xf6, 0xff, 100}, - {EM2874_R80_GPIO, 0xf2, 0xff, 50}, - {EM2874_R80_GPIO, 0xf6, 0xff, 100}, + {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100}, + {EM2874_R80_GPIO_P0_CTRL, 0xf2, 0xff, 50}, + {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100}, { -1, -1, -1, -1}, }; struct em28xx_reg_seq terratec_h5_end[] = { - {EM2874_R80_GPIO, 0xe6, 0xff, 100}, - {EM2874_R80_GPIO, 0xa6, 0xff, 50}, - {EM2874_R80_GPIO, 0xe6, 0xff, 100}, + {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100}, + {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 50}, + {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100}, { -1, -1, -1, -1}, }; struct { @@ -544,14 +544,14 @@ static void terratec_htc_stick_init(struct em28xx *dev) */ struct em28xx_reg_seq terratec_htc_stick_init[] = { {EM28XX_R08_GPIO, 0xff, 0xff, 10}, - {EM2874_R80_GPIO, 0xf6, 0xff, 100}, - {EM2874_R80_GPIO, 0xe6, 0xff, 50}, - {EM2874_R80_GPIO, 0xf6, 0xff, 100}, + {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100}, + {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 50}, + {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100}, { -1, -1, -1, -1}, }; struct em28xx_reg_seq terratec_htc_stick_end[] = { - {EM2874_R80_GPIO, 0xb6, 0xff, 100}, - {EM2874_R80_GPIO, 0xf6, 0xff, 50}, + {EM2874_R80_GPIO_P0_CTRL, 0xb6, 0xff, 100}, + {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 50}, { -1, -1, -1, -1}, }; @@ -591,15 +591,15 @@ static void terratec_htc_usb_xs_init(struct em28xx *dev) struct em28xx_reg_seq terratec_htc_usb_xs_init[] = { {EM28XX_R08_GPIO, 0xff, 0xff, 10}, - {EM2874_R80_GPIO, 0xb2, 0xff, 100}, - {EM2874_R80_GPIO, 0xb2, 0xff, 50}, - {EM2874_R80_GPIO, 0xb6, 0xff, 100}, + {EM2874_R80_GPIO_P0_CTRL, 0xb2, 0xff, 100}, + {EM2874_R80_GPIO_P0_CTRL, 0xb2, 0xff, 50}, + {EM2874_R80_GPIO_P0_CTRL, 0xb6, 0xff, 100}, { -1, -1, -1, -1}, }; struct em28xx_reg_seq terratec_htc_usb_xs_end[] = { - {EM2874_R80_GPIO, 0xa6, 0xff, 100}, - {EM2874_R80_GPIO, 0xa6, 0xff, 50}, - {EM2874_R80_GPIO, 0xe6, 0xff, 100}, + {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 100}, + {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 50}, + {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100}, { -1, -1, -1, -1}, }; diff --git a/drivers/media/usb/em28xx/em28xx-reg.h b/drivers/media/usb/em28xx/em28xx-reg.h index 622871db04aa..0233c5bedc55 100644 --- a/drivers/media/usb/em28xx/em28xx-reg.h +++ b/drivers/media/usb/em28xx/em28xx-reg.h @@ -193,7 +193,20 @@ #define EM2874_R50_IR_CONFIG 0x50 #define EM2874_R51_IR 0x51 #define EM2874_R5F_TS_ENABLE 0x5f -#define EM2874_R80_GPIO 0x80 + +/* em2874/174/84, em25xx, em276x/7x/8x GPIO registers */ +/* + * NOTE: not all ports are bonded out; + * Some ports are multiplexed with special function I/O + */ +#define EM2874_R80_GPIO_P0_CTRL 0x80 +#define EM2874_R81_GPIO_P1_CTRL 0x81 +#define EM2874_R82_GPIO_P2_CTRL 0x82 +#define EM2874_R83_GPIO_P3_CTRL 0x83 +#define EM2874_R84_GPIO_P0_STATE 0x84 +#define EM2874_R85_GPIO_P1_STATE 0x85 +#define EM2874_R86_GPIO_P2_STATE 0x86 +#define EM2874_R87_GPIO_P3_STATE 0x87 /* em2874 IR config register (0x50) */ #define EM2874_IR_NEC 0x00