From: Lech Perczak Date: Tue, 15 Mar 2022 18:27:48 +0000 (+0100) Subject: uqmi: explicitly disconnect IPv6 address family X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=90603d443f56da034c8e8e4f1aeee4c8975413e6;p=openwrt%2Fstaging%2Fblocktrron.git uqmi: explicitly disconnect IPv6 address family Some modems (namely, Telit LE910C4) require the IPv6 connection state to be cleared explicitly, to avoid reporting "no effect" if IPv6 connection is already connected through autoconnect mechanism, or during LTE default bearer attach, which would lead to established session, but without a way to inform protocol handler of the status. Signed-off-by: Lech Perczak --- diff --git a/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh b/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh index 5045ce04af..c271cb8660 100755 --- a/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh +++ b/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh @@ -192,6 +192,7 @@ proto_qmi_setup() { # Cleanup current state if any uqmi -s -d "$device" --stop-network 0xffffffff --autoconnect > /dev/null 2>&1 + uqmi -s -d "$device" --set-ip-family ipv6 --stop-network 0xffffffff --autoconnect > /dev/null 2>&1 # Go online uqmi -s -d "$device" --set-device-operating-mode online > /dev/null 2>&1