From: Hamish Guthrie <hcg@openwrt.org>
Date: Tue, 5 Jun 2007 03:31:12 +0000 (+0000)
Subject: Sets GPIO PB28 to multi-drive (open collector) - fixes reset issue
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=90153e678e31fa614559affd286abb95f409aae7;p=openwrt%2Fstaging%2Fneocturne.git

Sets GPIO PB28 to multi-drive (open collector) - fixes reset issue

SVN-Revision: 7498
---

diff --git a/target/linux/at91-2.6/patches/011-vlink-resetfix.patch b/target/linux/at91-2.6/patches/011-vlink-resetfix.patch
new file mode 100644
index 0000000000..78ff38481e
--- /dev/null
+++ b/target/linux/at91-2.6/patches/011-vlink-resetfix.patch
@@ -0,0 +1,10 @@
+--- linux-2.6.21.1.old/arch/arm/mach-at91/board-vlink.c	2007-06-04 15:45:19.000000000 +0200
++++ linux-2.6.21.1/arch/arm/mach-at91/board-vlink.c	2007-06-05 05:27:19.000000000 +0200
+@@ -175,6 +175,7 @@
+ /* USB Device control */
+        at91_set_gpio_input(AT91_PIN_PB27, 1);  // UDB_CNX
+        at91_set_gpio_output(AT91_PIN_PB28, 1); // UDB_PUP
++			 at91_set_multi_drive(AT91_PIN_PB28, 1); // Set to multi-drive
+ 
+ }
+