From: Nicolas Thill Date: Fri, 20 May 2005 16:32:01 +0000 (+0000) Subject: Add net-snmp package X-Git-Tag: reboot~32731 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=8fffd0e036f7f0408c26fd2fa7b83dd0ced0bda8;p=openwrt%2Fstaging%2Fjogo.git Add net-snmp package SVN-Revision: 991 --- diff --git a/openwrt/package/net-snmp/Config.in b/openwrt/package/net-snmp/Config.in new file mode 100644 index 0000000000..8f0cdffff5 --- /dev/null +++ b/openwrt/package/net-snmp/Config.in @@ -0,0 +1,29 @@ +config BR2_PACKAGE_NET_SNMP + prompt "net-snmp - Open source SNMP (Simple Network Management Protocol) implementation" + bool + default y if CONFIG_DEVEL + help + Simple Network Management Protocol (SNMP) is a widely used + protocol for monitoring the health and welfare of network + equipment (eg. routers), computer equipment and even devices + like UPSs. Net-SNMP is a suite of applications used to implement + SNMP v1, SNMP v2c and SNMP v3 using both IPv4 and IPv6. + + http://www.net-snmp.org/ + + +config BR2_PACKAGE_LIBNETSNMP + tristate "libnet-snmp - SNMP libraries" + default m if CONFIG_DEVEL + depends BR2_PACKAGE_NET_SNMP + +config BR2_PACKAGE_SNMPD + tristate "snmdp - SNMP agent" + default m if CONFIG_DEVEL + depends BR2_PACKAGE_LIBNETSNMP + +config BR2_PACKAGE_SNMP_UTILS + tristate "snmp-utils - SNMP client utilities" + default m if CONFIG_DEVEL + depends BR2_PACKAGE_LIBNETSNMP + diff --git a/openwrt/package/net-snmp/Makefile b/openwrt/package/net-snmp/Makefile new file mode 100644 index 0000000000..7211906998 --- /dev/null +++ b/openwrt/package/net-snmp/Makefile @@ -0,0 +1,159 @@ +# $Id$ + +include $(TOPDIR)/rules.mk + +PKG_NAME:=net-snmp +PKG_VERSION:=5.1.2 +PKG_RELEASE:=1 +PKG_MD5SUM:=8080555ab3f90011f25d5122042d9a8d + +PKG_SOURCE_URL:=@SF/net-snmp +PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz +PKG_CAT:=zcat + +PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION) +PKG_INSTALL_DIR:=$(PKG_BUILD_DIR)/ipkg-install + +SNMP_MIB_MODULES_INCLUDED = \ + host/hr_device \ + host/hr_disk \ + host/hr_filesys \ + host/hr_network \ + host/hr_partition \ + host/hr_proc \ + host/hr_storage \ + host/hr_system \ + ieee802dot11 \ + mibII/at \ + mibII/icmp \ + mibII/interfaces \ + mibII/ip \ + mibII/snmp_mib \ + mibII/sysORTable \ + mibII/system_mib \ + mibII/tcp \ + mibII/udp \ + mibII/vacm_context \ + mibII/vacm_vars \ + snmpv3/snmpEngine \ + snmpv3/snmpMPDStats \ + snmpv3/usmStats \ + snmpv3/usmUser \ + snmpv3mibs \ + tunnel \ + ucd-snmp/loadave \ + ucd-snmp/memory \ + ucd-snmp/proc \ + ucd-snmp/vmstat \ + util_funcs \ + utilities/execute \ + +SNMP_MIB_MODULES_EXCLUDED = \ + agent_mibs \ + agentx \ + host \ + mibII \ + notification \ + snmpv3mibs \ + target \ + ucd_snmp \ + utilities \ + +SNMP_TRANSPORTS_INCLUDED = UDP + +SNMP_TRANSPORTS_EXCLUDED = Callback TCP TCPv6 UDPv6 Unix + +PKG_CONFIGURE_OPTIONS = \ + --enable-shared \ + --enable-static \ + --with-endianness=little \ + --with-logfile=/var/log/snmpd.log \ + --with-persistent-directory=/usr/lib/snmp/ \ + --with-default-snmp-version=1 \ + --with-sys-contact=root@localhost \ + --with-sys-location=Unknown \ + --enable-applications \ + --disable-debugging \ + --disable-ipv6 \ + --disable-manuals \ + --disable-mib-loading \ + --disable-mibs \ + --disable-scripts \ + --with-out-mib-modules="$(SNMP_MIB_MODULES_EXCLUDED)" \ + --with-mib-modules="$(SNMP_MIB_MODULES_INCLUDED)" \ + --with-out-transports="$(SNMP_TRANSPORTS_EXCLUDED)" \ + --with-transports="$(SNMP_TRANSPORTS_INCLUDED)" \ + --without-opaque-special-types \ + --without-openssl \ + --without-libwrap \ + --without-rpm \ + --without-zlib \ + +include $(TOPDIR)/package/rules.mk + +$(eval $(call PKG_template,LIBNETSNMP,libnetsnmp,$(PKG_VERSION)-$(PKG_RELEASE),$(ARCH))) +$(eval $(call PKG_template,SNMPD,snmpd,$(PKG_VERSION)-$(PKG_RELEASE),$(ARCH))) +$(eval $(call PKG_template,SNMP_UTILS,snmp-utils,$(PKG_VERSION)-$(PKG_RELEASE),$(ARCH))) + +$(PKG_BUILD_DIR)/.configured: + (cd $(PKG_BUILD_DIR); rm -rf config.{cache,status} ; \ + $(TARGET_CONFIGURE_OPTS) \ + CFLAGS="$(TARGET_CFLAGS)" \ + CPPFLAGS="-I$(STAGING_DIR)/usr/include" \ + LDFLAGS="-L$(STAGING_DIR)/usr/lib" \ + ac_cv_header_pcap_h=no \ + ./configure \ + --target=$(GNU_TARGET_NAME) \ + --host=$(GNU_TARGET_NAME) \ + --build=$(GNU_HOST_NAME) \ + --program-prefix="" \ + --program-suffix="" \ + --prefix=/usr \ + --exec-prefix=/usr \ + --bindir=/usr/bin \ + --datadir=/usr/share \ + --includedir=/usr/include \ + --infodir=/usr/share/info \ + --libdir=/usr/lib \ + --libexecdir=/usr/lib \ + --localstatedir=/var \ + --mandir=/usr/share/man \ + --sbindir=/usr/sbin \ + --sysconfdir=/etc \ + $(DISABLE_LARGEFILE) \ + $(DISABLE_NLS) \ + $(PKG_CONFIGURE_OPTIONS) \ + ); + touch $@ + +$(PKG_BUILD_DIR)/.built: + rm -rf $(PKG_INSTALL_DIR) + mkdir -p $(PKG_INSTALL_DIR) + $(MAKE) -C $(PKG_BUILD_DIR) \ + INSTALL_PREFIX="$(PKG_INSTALL_DIR)" \ + all install + touch $@ + +$(IPKG_LIBNETSNMP): + install -d -m0755 $(IDIR_LIBNETSNMP)/usr/lib + cp -fpR $(PKG_INSTALL_DIR)/usr/lib/libnetsnmp{,agent,helpers,mibs}.so.* $(IDIR_LIBNETSNMP)/usr/lib/ + $(RSTRIP) $(IDIR_LIBNETSNMP) + $(IPKG_BUILD) $(IDIR_LIBNETSNMP) $(PACKAGE_DIR) + +$(IPKG_SNMPD): + install -d -m0755 $(IDIR_SNMPD)/etc/snmp + install -m0644 ./files/snmpd.conf $(IDIR_SNMPD)/etc/snmp/snmpd.conf + install -d -m0755 $(IDIR_SNMPD)/etc/default + install -m0644 ./files/snmpd.default $(IDIR_SNMPD)/etc/default/snmpd + install -d -m0755 $(IDIR_SNMPD)/etc/init.d + install -m0755 ./files/snmpd.init $(IDIR_SNMPD)/etc/init.d/snmpd + install -d -m0755 $(IDIR_SNMPD)/usr/sbin + cp -fpR $(PKG_INSTALL_DIR)/usr/sbin/snmpd $(IDIR_SNMPD)/usr/sbin/ + $(RSTRIP) $(IDIR_SNMPD) + $(IPKG_BUILD) $(IDIR_SNMPD) $(PACKAGE_DIR) + +$(IPKG_SNMP_UTILS): + install -d -m0755 $(IDIR_SNMP_UTILS)/usr/bin + cp -fpR $(PKG_INSTALL_DIR)/usr/bin/snmp{get,set,status,test,walk} $(IDIR_SNMP_UTILS)/usr/bin/ + $(RSTRIP) $(IDIR_SNMP_UTILS) + $(IPKG_BUILD) $(IDIR_SNMP_UTILS) $(PACKAGE_DIR) diff --git a/openwrt/package/net-snmp/files/snmpd.conf b/openwrt/package/net-snmp/files/snmpd.conf new file mode 100644 index 0000000000..f6e872ab64 --- /dev/null +++ b/openwrt/package/net-snmp/files/snmpd.conf @@ -0,0 +1,14 @@ +com2sec ro default public +com2sec rw localhost private + +group public v1 ro +group public v2c ro +group public usm ro +group private v1 rw +group private v2c rw +group private usm rw + +view all included .1 + +access public "" any noauth exact all none none +access private "" any noauth exact all all all diff --git a/openwrt/package/net-snmp/files/snmpd.default b/openwrt/package/net-snmp/files/snmpd.default new file mode 100644 index 0000000000..758c8e44fe --- /dev/null +++ b/openwrt/package/net-snmp/files/snmpd.default @@ -0,0 +1 @@ +OPTIONS="-Lf /dev/null -p /var/run/snmpd.pid" diff --git a/openwrt/package/net-snmp/files/snmpd.init b/openwrt/package/net-snmp/files/snmpd.init new file mode 100644 index 0000000000..46b429760b --- /dev/null +++ b/openwrt/package/net-snmp/files/snmpd.init @@ -0,0 +1,25 @@ +#!/bin/sh + +DEFAULT=/etc/default/snmpd +LIB_D=/var/lib/snmp +LOG_D=/var/log +RUN_D=/var/run +PID_F=$RUN_D/snmpd.pid + +[ -f $DEFAULT ] && . $DEFAULT + +case $1 in + start) + [ -d $LIB_D ] || mkdir -p $LIB_D + [ -d $LOG_D ] || mkdir -p $LOG_D + [ -d $RUN_D ] || mkdir -p $RUN_D + snmpd $OPTIONS + ;; + stop) + [ -f $PID_F ] && kill $(cat $PID_F) + ;; + *) + echo "usage: $0 (start|stop)" + exit 1 +esac +exit $? diff --git a/openwrt/package/net-snmp/ipkg/libnetsnmp.control b/openwrt/package/net-snmp/ipkg/libnetsnmp.control new file mode 100644 index 0000000000..e7046b07af --- /dev/null +++ b/openwrt/package/net-snmp/ipkg/libnetsnmp.control @@ -0,0 +1,8 @@ +Package: libnetsnmp +Priority: optional +Section: libs +Version: [TBDL] +Architecture: [TBDL] +Maintainer: Nico +Source: http://nthill.free.fr/openwrt/sources/net-snmp/ +Description: an SNMP library diff --git a/openwrt/package/net-snmp/ipkg/snmp-utils.control b/openwrt/package/net-snmp/ipkg/snmp-utils.control new file mode 100644 index 0000000000..58415fbdd4 --- /dev/null +++ b/openwrt/package/net-snmp/ipkg/snmp-utils.control @@ -0,0 +1,9 @@ +Package: snmp-utils +Priority: optional +Section: admin +Version: [TBDL] +Architecture: [TBDL] +Maintainer: Nico +Source: http://nthill.free.fr/openwrt/sources/net-snmp/ +Description: a collection of SNMP utilities +Depends: libsnmp diff --git a/openwrt/package/net-snmp/ipkg/snmpd.conffiles b/openwrt/package/net-snmp/ipkg/snmpd.conffiles new file mode 100644 index 0000000000..2864cc903a --- /dev/null +++ b/openwrt/package/net-snmp/ipkg/snmpd.conffiles @@ -0,0 +1,2 @@ +/etc/default/snmpd +/etc/snmp/snmpd.conf diff --git a/openwrt/package/net-snmp/ipkg/snmpd.control b/openwrt/package/net-snmp/ipkg/snmpd.control new file mode 100644 index 0000000000..7b29393498 --- /dev/null +++ b/openwrt/package/net-snmp/ipkg/snmpd.control @@ -0,0 +1,9 @@ +Package: snmpd +Priority: optional +Section: admin +Version: [TBDL] +Architecture: [TBDL] +Maintainer: Nico +Source: http://nthill.free.fr/openwrt/sources/net-snmp/ +Description: an SNMP agent +Depends: libsnmp diff --git a/openwrt/package/net-snmp/patches/500-debian-subset-5.1.2-6.1.patch b/openwrt/package/net-snmp/patches/500-debian-subset-5.1.2-6.1.patch new file mode 100644 index 0000000000..fd99ed745c --- /dev/null +++ b/openwrt/package/net-snmp/patches/500-debian-subset-5.1.2-6.1.patch @@ -0,0 +1,7282 @@ +diff -ruN net-snmp-5.1.2-orig/EXAMPLE-trap.conf net-snmp-5.1.2-5/EXAMPLE-trap.conf +--- net-snmp-5.1.2-orig/EXAMPLE-trap.conf 1970-01-01 01:00:00.000000000 +0100 ++++ net-snmp-5.1.2-5/EXAMPLE-trap.conf 2005-03-13 16:17:21.000000000 +0100 +@@ -0,0 +1,18 @@ ++############################################################################### ++# ++# EXAMPLE.conf: ++# An example configuration file for configuring the ucd-snmp snmptrapd agent. ++# ++############################################################################### ++# ++# This file is intended to only be an example. If, however, you want ++# to use it, it should be placed in /etc/snmp/snmptrapd.conf. ++# When the snmptrapd agent starts up, this is where it will look for it. ++# ++# All lines beginning with a '#' are comments and are intended for you ++# to read. All other lines are configuration commands for the agent. ++ ++# ++# PLEASE: read the snmptrapd.conf(5) manual page as well! ++# ++ +diff -ruN net-snmp-5.1.2-orig/EXAMPLE.conf.def net-snmp-5.1.2-5/EXAMPLE.conf.def +--- net-snmp-5.1.2-orig/EXAMPLE.conf.def 2003-02-25 15:04:06.000000000 +0100 ++++ net-snmp-5.1.2-5/EXAMPLE.conf.def 2005-03-13 16:17:21.000000000 +0100 +@@ -6,7 +6,7 @@ + ############################################################################### + # + # This file is intended to only be an example. If, however, you want +-# to use it, it should be placed in SYSCONFDIR/share/snmp/snmpd.conf. ++# to use it, it should be placed in /etc/snmp/snmpd.conf. + # When the snmpd agent starts up, this is where it will look for it. + # + # You might be interested in generating your own snmpd.conf file using +@@ -58,31 +58,37 @@ + # from): + + # sec.name source community +-com2sec local localhost COMMUNITY +-com2sec mynetwork NETWORK/24 COMMUNITY ++com2sec paranoid default public ++#com2sec readonly default public ++#com2sec readwrite default private + + #### + # Second, map the security names into group names: + + # sec.model sec.name +-group MyRWGroup v1 local +-group MyRWGroup v2c local +-group MyRWGroup usm local +-group MyROGroup v1 mynetwork +-group MyROGroup v2c mynetwork +-group MyROGroup usm mynetwork ++group MyROSystem v1 paranoid ++group MyROSystem v2c paranoid ++group MyROSystem usm paranoid ++group MyROGroup v1 readonly ++group MyROGroup v2c readonly ++group MyROGroup usm readonly ++group MyRWGroup v1 readwrite ++group MyRWGroup v2c readwrite ++group MyRWGroup usm readwrite + + #### + # Third, create a view for us to let the groups have rights to: + + # incl/excl subtree mask + view all included .1 80 ++view system included .iso.org.dod.internet.mgmt.mib-2.system + + #### + # Finally, grant the 2 groups access to the 1 view with different + # write permissions: + + # context sec.model sec.level match read write notif ++access MyROSystem "" any noauth exact system none none + access MyROGroup "" any noauth exact all none none + access MyRWGroup "" any noauth exact all all none + +@@ -100,8 +106,8 @@ + # value of an object whose value is given here will fail with an error + # status of notWritable. + +-syslocation Right here, right now. +-syscontact Me ++syslocation Unknown (configure /etc/snmp/snmpd.local.conf) ++syscontact Root (configure /etc/snmp/snmpd.local.conf) + + # Example output of snmpwalk: + # % snmpwalk -v 1 -c public localhost system +@@ -135,13 +141,13 @@ + # + + # Make sure mountd is running +-proc mountd ++#proc mountd + + # Make sure there are no more than 4 ntalkds running, but 0 is ok too. +-proc ntalkd 4 ++#proc ntalkd 4 + + # Make sure at least one sendmail, but less than or equal to 10 are running. +-proc sendmail 10 1 ++#proc sendmail 10 1 + + # A snmpwalk of the prTable would look something like this: + # +@@ -199,7 +205,7 @@ + # ARGS: optional arguments to be passed to the program + + # a simple hello world +-exec echotest /bin/echo hello world ++#exec echotest /bin/echo hello world + + # Run a shell script containing: + # +@@ -250,7 +256,7 @@ + + # Check the / partition and make sure it contains at least 10 megs. + +-disk / 10000 ++#disk / 10000 + + # % snmpwalk -v 1 -c public localhost .EXTENSIBLEDOTMIB.DISKMIBNUM + # enterprises.ucdavis.diskTable.dskEntry.diskIndex.1 = 0 +@@ -279,7 +285,7 @@ + # 15MAX: Similar, but for 15 min average. + + # Check for loads: +-load 12 14 14 ++#load 12 14 14 + + # % snmpwalk -v 1 -c public localhost .EXTENSIBLEDOTMIB.LOADAVEMIBNUM + # enterprises.ucdavis.loadTable.laEntry.loadaveIndex.1 = 1 +@@ -365,7 +371,7 @@ + # (commented out here since it requires that you place the + # script in the right location. (its not installed by default)) + +-# pass .EXTENSIBLEDOTMIB.255 /bin/sh PREFIX/local/passtest ++# pass .EXTENSIBLEDOTMIB.255 /bin/sh /usr/local/passtest + + # % snmpwalk -v 1 -c public localhost .EXTENSIBLEDOTMIB.255 + # enterprises.ucdavis.255.1 = "life the universe and everything" +diff -ruN net-snmp-5.1.2-orig/FAQ net-snmp-5.1.2-5/FAQ +--- net-snmp-5.1.2-orig/FAQ 2004-08-07 10:02:45.000000000 +0200 ++++ net-snmp-5.1.2-5/FAQ 2005-03-13 16:17:21.000000000 +0100 +@@ -104,7 +104,7 @@ + I don't understand the new access control stuff - what does it mean? + How do I configure SNMPv3 users? + The 'createUser' line disappears when I start the agent. Why? +- What's the difference between /var/ucd-snmp and /usr/local/share/snmp? ++ What's the difference between /var/ucd-snmp and /usr/share/snmp? + My new agent is ignoring the old snmpd.conf file. Why? + Why am I getting "Connection refused"? + I'm getting errors about "bad security model" - why? +@@ -620,7 +620,7 @@ + + Firstly, + +- cp MY-MIB.txt /usr/local/share/snmp/mibs ++ cp MY-MIB.txt /usr/share/snmp/mibs + + or + +@@ -639,7 +639,7 @@ + Note that you need *both* steps. + The first command copies the file defining the new MIB to a + expected location for MIB files. This defaults to +- /usr/local/share/snmp/mibs (or PREFIX/share/snmp/mibs if the the ++ /usr/share/snmp/mibs (or PREFIX/share/snmp/mibs if the the + suite was installed into a different base location). Some + ready-packaged distributions (such as Linux RPM packages) may look + for MIB files in a different location, such as /etc/snmp/mibs - put +@@ -1111,7 +1111,7 @@ + If this is the case, then you can specify this interpreter + explicitly as part of the trap handle directive: + +- traphandle default /usr/bin/perl /usr/local/bin/log_it ++ traphandle default /usr/bin/perl /usr/bin/log_it + + Note that in this case, it's almost certain that you'll also + need to give the full path to the traphandle script (as shown) +@@ -1263,7 +1263,7 @@ + (if appropriate) the community string to use. + + Some of these (such as the MIB file location), might belong in a +- shared snmp.conf file (typically /usr/local/share/snmp/snmp.conf or ++ shared snmp.conf file (typically /usr/share/snmp/snmp.conf or + /etc/snmp/snmp.conf) to apply to all users of the system. Others + (particularly the SNMPv3 security settings), are more likely to refer + to a particular user, and should go in a personal snmp.conf file +@@ -1522,7 +1522,7 @@ + + + Alternatively, the tools may be looking in the wrong place. +- The default location for the mib files is /usr/local/share/snmp/mibs. ++ The default location for the mib files is /usr/share/snmp/mibs. + Again, this is set when the suite is first configured and compiled. + This can be changed using the environmental variable 'MIBDIRS' + or the snmp.conf directive 'mibdirs'. +@@ -2507,11 +2507,11 @@ + + + +-What's the difference between /var/ucd-snmp and /usr/local/share/snmp? ++What's the difference between /var/ucd-snmp and /usr/share/snmp? + --------------------------------------------------------------------- + + Most "static" agent configuration should go in the traditional location +- (typically /usr/local/share/snmp/snmpd.conf or /etc/snmp). The ++ (typically /usr/share/snmp/snmpd.conf or /etc/snmp). The + /var/ucd-snmp (or /var/net-snmp) location is used for information set during + the running of the agent, which needs to be persistent between one run of + the agent and the next. +@@ -2531,7 +2531,7 @@ + distribution), with the current release installed from the source. + + The default location for this file with the basic distribution is +- /usr/local/share/snmp/snmpd.conf (or PREFIX/share/snmp/snmpd.conf). ++ /usr/share/snmp/snmpd.conf (or PREFIX/share/snmp/snmpd.conf). + Ready-installed versions often look for the file as /etc/snmpd.conf, + or /etc/snmp/snmpd.conf. Try moving the old config file to the new + location, and restart the agent. +diff -ruN net-snmp-5.1.2-orig/Makefile.in net-snmp-5.1.2-5/Makefile.in +--- net-snmp-5.1.2-orig/Makefile.in 2004-08-04 14:48:14.000000000 +0200 ++++ net-snmp-5.1.2-5/Makefile.in 2005-03-13 16:17:21.000000000 +0100 +@@ -163,6 +163,11 @@ + ( cd perl ; $(MAKE) clean ) ; \ + fi + ++perlrealclean: ++ @if test -f perl/Makefile; then \ ++ ( cd perl ; $(MAKE) realclean ) ; \ ++ fi ++ + # + # make distclean completely removes all traces of building including + # any files generated by configure itself. +diff -ruN net-snmp-5.1.2-orig/Makefile.rules net-snmp-5.1.2-5/Makefile.rules +--- net-snmp-5.1.2-orig/Makefile.rules 2004-02-13 23:42:28.000000000 +0100 ++++ net-snmp-5.1.2-5/Makefile.rules 2005-03-13 16:17:21.000000000 +0100 +@@ -301,7 +301,7 @@ + # cleaning targets + # + clean: cleansubdirs $(OTHERCLEANTODOS) +- rm -f core ${OBJS} ${LOBJS} $(STANDARDCLEANTARGETS) $(OTHERCLEANTARGETS) ++ rm -f -- core ${OBJS} ${LOBJS} $(STANDARDCLEANTARGETS) $(OTHERCLEANTARGETS) + rm -rf .libs + + cleansubdirs: +diff -ruN net-snmp-5.1.2-orig/Makefile.top net-snmp-5.1.2-5/Makefile.top +--- net-snmp-5.1.2-orig/Makefile.top 2004-08-07 09:29:36.000000000 +0200 ++++ net-snmp-5.1.2-5/Makefile.top 2005-03-13 16:17:21.000000000 +0100 +@@ -27,6 +27,7 @@ + snmplibdir = $(datadir)/snmp + mibdir = $(snmplibdir)/mibs + persistentdir = @PERSISTENT_DIRECTORY@ ++sysconfdir = @sysconfdir@ + INSTALL_PREFIX = @INSTALL_PREFIX@ + + # +diff -ruN net-snmp-5.1.2-orig/acconfig.h net-snmp-5.1.2-5/acconfig.h +--- net-snmp-5.1.2-orig/acconfig.h 2004-06-28 20:54:17.000000000 +0200 ++++ net-snmp-5.1.2-5/acconfig.h 2005-03-13 16:17:21.000000000 +0100 +@@ -560,6 +560,9 @@ + /* define if you have getservbyname */ + #undef HAVE_GETSERVBYNAME + ++/* define if you have dlopen */ ++#undef HAVE_DLOPEN ++ + /* printing system */ + #undef HAVE_LPSTAT + #undef LPSTAT_PATH +diff -ruN net-snmp-5.1.2-orig/acinclude.m4 net-snmp-5.1.2-5/acinclude.m4 +--- net-snmp-5.1.2-orig/acinclude.m4 1970-01-01 01:00:00.000000000 +0100 ++++ net-snmp-5.1.2-5/acinclude.m4 2005-03-13 16:17:21.000000000 +0100 +@@ -0,0 +1,193 @@ ++dnl @synopsis AC_PROMPT_USER_NO_DEFINE(VARIABLENAME,QUESTION,[DEFAULT]) ++dnl ++dnl Asks a QUESTION and puts the results in VARIABLENAME with an optional ++dnl DEFAULT value if the user merely hits return. ++dnl ++dnl @version 1.15 ++dnl @author Wes Hardaker ++dnl ++AC_DEFUN([AC_PROMPT_USER_NO_DEFINE], ++dnl changequote(<<, >>) dnl ++dnl << ++[ ++if test "x$defaults" = "xno"; then ++echo $ac_n "$2 ($3): $ac_c" ++read tmpinput ++if test "$tmpinput" = "" -a "$3" != ""; then ++ tmpinput="$3" ++fi ++eval $1=\"$tmpinput\" ++else ++tmpinput="$3" ++eval $1=\"$tmpinput\" ++fi ++] ++dnl >> ++dnl changequote([, ]) ++) dnl done AC_PROMPT_USER ++ ++dnl @synopsis AC_PROMPT_USER(VARIABLENAME,QUESTION,[DEFAULT],QUOTED) ++dnl ++dnl Asks a QUESTION and puts the results in VARIABLENAME with an optional ++dnl DEFAULT value if the user merely hits return. Also calls ++dnl AC_DEFINE_UNQUOTED() on the VARIABLENAME for VARIABLENAMEs that should ++dnl be entered into the config.h file as well. If QUOTED is "quoted" then ++dnl the result will be defined within quotes. ++dnl ++dnl @version 1.15 ++dnl @author Wes Hardaker ++dnl ++AC_DEFUN([AC_PROMPT_USER], ++[ ++MSG_CHECK=`echo "$2" | tail -1` ++AC_CACHE_CHECK($MSG_CHECK, ac_cv_user_prompt_$1, ++[echo "" >&AC_FD_MSG ++AC_PROMPT_USER_NO_DEFINE($1,[$2],$3) ++eval ac_cv_user_prompt_$1=\$$1 ++echo $ac_n "setting $MSG_CHECK to... $ac_c" >&AC_FD_MSG ++]) ++if test "$ac_cv_user_prompt_$1" != "none"; then ++ if test "x$4" = "xquoted" -o "x$4" = "xQUOTED"; then ++ AC_DEFINE_UNQUOTED($1,"$ac_cv_user_prompt_$1") ++ else ++ AC_DEFINE_UNQUOTED($1,$ac_cv_user_prompt_$1) ++ fi ++fi ++]) dnl ++ ++dnl @synopsis AC_CHECK_STRUCT_FOR(INCLUDES,STRUCT,MEMBER,DEFINE,[no]) ++dnl ++dnl Checks STRUCT for MEMBER and defines DEFINE if found. ++dnl ++dnl @version 1.15 ++dnl @author Wes Hardaker ++dnl ++AC_DEFUN(AC_CHECK_STRUCT_FOR,[ ++ ++ac_safe_struct=`echo "$2" | sed 'y%./+-%__p_%'` ++ac_safe_member=`echo "$3" | sed 'y%./+-%__p_%'` ++ac_safe_all="ac_cv_struct_${ac_safe_struct}_has_${ac_safe_member}" ++changequote(, )dnl ++ ac_uc_define=STRUCT_`echo "${ac_safe_struct}_HAS_${ac_safe_member}" | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` ++changequote([, ])dnl ++ ++AC_MSG_CHECKING([for $2.$3]) ++AC_CACHE_VAL($ac_safe_all, ++[ ++if test "x$4" = "x"; then ++ defineit="= 0" ++elif test "x$4" = "xno"; then ++ defineit="" ++else ++ defineit="$4" ++fi ++AC_TRY_COMPILE([ ++$1 ++],[ ++struct $2 testit; ++testit.$3 $defineit; ++], eval "${ac_safe_all}=yes", eval "${ac_safe_all}=no" ) ++]) ++ ++if eval "test \"x$`echo ${ac_safe_all}`\" = \"xyes\""; then ++ AC_MSG_RESULT(yes) ++ AC_DEFINE_UNQUOTED($ac_uc_define) ++else ++ AC_MSG_RESULT(no) ++fi ++ ++]) ++ ++dnl AC_CHECK_IFNET_FOR(SUBSTRUCT,[no]) ++AC_DEFUN(AC_CHECK_IFNET_FOR,[ ++dnl check for $1 in struct ifnet ++AC_CHECK_STRUCT_FOR([ ++#ifdef IFNET_NEEDS_KERNEL ++#define _KERNEL 1 ++#endif ++#include ++#include ++#ifdef HAVE_SYS_TIME_H ++#include ++#endif ++#include ++#ifdef HAVE_NET_IF_VAR_H ++#include ++#endif ++#ifdef HAVE_SYS_QUEUE_H ++#include ++#endif ++#ifdef linux ++struct ifnet { ++ char *if_name; /* name, e.g. "en" or "lo" */ ++ short if_unit; /* sub-unit for lower level driver */ ++ short if_mtu; /* maximum transmission unit */ ++ short if_flags; /* up/down, broadcast, etc. */ ++ int if_metric; /* routing metric (external only) */ ++ char if_hwaddr [6]; /* ethernet address */ ++ int if_type; /* interface type: 1=generic, ++ 28=slip, ether=6, loopback=24 */ ++ int if_speed; /* interface speed: in bits/sec */ ++ ++ struct sockaddr if_addr; /* interface's address */ ++ struct sockaddr ifu_broadaddr; /* broadcast address */ ++ struct sockaddr ia_subnetmask; /* interface's mask */ ++ ++ struct ifqueue { ++ int ifq_len; ++ int ifq_drops; ++ } if_snd; /* output queue */ ++ int if_ibytes; /* octets received on interface */ ++ int if_ipackets; /* packets received on interface */ ++ int if_ierrors; /* input errors on interface */ ++ int if_iqdrops; /* input queue overruns */ ++ int if_obytes; /* octets sent on interface */ ++ int if_opackets; /* packets sent on interface */ ++ int if_oerrors; /* output errors on interface */ ++ int if_collisions; /* collisions on csma interfaces */ ++/* end statistics */ ++ struct ifnet *if_next; ++}; ++#endif ++], ifnet, $1, $2) ++]) ++ ++dnl ++dnl Add a search path to the LIBS and CFLAGS variables ++dnl ++AC_DEFUN(AC_ADD_SEARCH_PATH,[ ++ if test "x$1" != x -a -d $1; then ++ if test -d $1/lib; then ++ LDFLAGS="-L$1/lib $LDFLAGS" ++ fi ++ if test -d $1/include; then ++ CPPFLAGS="-I$1/include $CPPFLAGS" ++ fi ++ fi ++]) ++ ++dnl ++dnl Store information for displaying later. ++dnl ++AC_DEFUN(AC_MSG_CACHE_INIT,[ ++ rm -f configure-summary ++]) ++ ++AC_DEFUN(AC_MSG_CACHE_ADD,[ ++ cat >> configure-summary << EOF ++ $1 ++EOF ++]) ++ ++AC_DEFUN(AC_MSG_CACHE_DISPLAY,[ ++ echo "" ++ echo "---------------------------------------------------------" ++ echo " Net-SNMP configuration summary:" ++ echo "---------------------------------------------------------" ++ echo "" ++ cat configure-summary ++ echo "" ++ echo "---------------------------------------------------------" ++ echo "" ++]) ++ +diff -ruN net-snmp-5.1.2-orig/agent/Makefile.in net-snmp-5.1.2-5/agent/Makefile.in +--- net-snmp-5.1.2-orig/agent/Makefile.in 2003-10-14 15:30:48.000000000 +0200 ++++ net-snmp-5.1.2-5/agent/Makefile.in 2005-03-13 16:17:21.000000000 +0100 +@@ -82,7 +82,7 @@ + # libnetsnmpagent objects + LIBAGENTOBJS=snmp_agent.o snmp_vars.o agent_read_config.o \ + agent_registry.o agent_index.o agent_trap.o kernel.o \ +- agent_handler.o @OTHERAGENTLIBOBJS@ ++ agent_handler.o @OTHERAGENTLIBOBJS@ @WRAPLIBS@ + LLIBAGENTOBJS=snmp_agent.lo snmp_vars.lo agent_read_config.lo \ + agent_registry.lo agent_index.lo agent_trap.lo kernel.lo \ + agent_handler.lo @OTHERAGENTLIBLOBJS@ +@@ -120,11 +120,11 @@ + + + libnetsnmpagent.$(LIB_EXTENSION)$(LIB_VERSION): ${LLIBAGENTOBJS} libnetsnmpmibs.$(LIB_EXTENSION)$(LIB_VERSION) +- $(LIB_LD_CMD) libnetsnmpagent.$(LIB_EXTENSION)$(LIB_VERSION) ${LLIBAGENTOBJS} $(LIB_LD_LIBS) ++ $(LIB_LD_CMD) libnetsnmpagent.$(LIB_EXTENSION)$(LIB_VERSION) ${LLIBAGENTOBJS} $(LIB_LD_LIBS) $(AGENT_RELINK_LIBS) + $(RANLIB) libnetsnmpagent.$(LIB_EXTENSION)$(LIB_VERSION) + + libnetsnmpmibs.$(LIB_EXTENSION)$(LIB_VERSION): ${LMIBOBJS} +- $(LIB_LD_CMD) libnetsnmpmibs.$(LIB_EXTENSION)$(LIB_VERSION) ${LMIBOBJS} $(LIB_LD_LIBS) ++ $(LIB_LD_CMD) libnetsnmpmibs.$(LIB_EXTENSION)$(LIB_VERSION) ${LMIBOBJS} $(LIB_LD_LIBS) $(MIBS_RELINK_LIBS) $(LIBSENSORS) + $(RANLIB) libnetsnmpmibs.$(LIB_EXTENSION)$(LIB_VERSION) + + embedperlinstall: +diff -ruN net-snmp-5.1.2-orig/agent/helpers/Makefile.in net-snmp-5.1.2-5/agent/helpers/Makefile.in +--- net-snmp-5.1.2-orig/agent/helpers/Makefile.in 2004-03-01 06:26:12.000000000 +0100 ++++ net-snmp-5.1.2-5/agent/helpers/Makefile.in 2005-03-13 16:17:21.000000000 +0100 +@@ -68,5 +68,5 @@ + all: standardall + + libnetsnmphelpers.$(LIB_EXTENSION)$(LIB_VERSION): ${LOBJS} +- $(LIB_LD_CMD) libnetsnmphelpers.$(LIB_EXTENSION)$(LIB_VERSION) ${LOBJS} $(LIB_LD_LIBS) ++ $(LIB_LD_CMD) libnetsnmphelpers.$(LIB_EXTENSION)$(LIB_VERSION) ${LOBJS} $(LIB_LD_LIBS) $(HELPERS_RELINK_LIBS) + $(RANLIB) libnetsnmphelpers.$(LIB_EXTENSION)$(LIB_VERSION) +diff -ruN net-snmp-5.1.2-orig/agent/mibgroup/agentx/protocol.h net-snmp-5.1.2-5/agent/mibgroup/agentx/protocol.h +--- net-snmp-5.1.2-orig/agent/mibgroup/agentx/protocol.h 2002-04-20 09:30:01.000000000 +0200 ++++ net-snmp-5.1.2-5/agent/mibgroup/agentx/protocol.h 2005-03-13 16:17:21.000000000 +0100 +@@ -10,7 +10,7 @@ + */ + + #define AGENTX_PORT 705 +-#define AGENTX_SOCKET "/var/agentx/master" ++#define AGENTX_SOCKET "/var/run/agentx" + + /* + * AgentX versions +diff -ruN net-snmp-5.1.2-orig/agent/mibgroup/mibII/interfaces.c net-snmp-5.1.2-5/agent/mibgroup/mibII/interfaces.c +--- net-snmp-5.1.2-orig/agent/mibgroup/mibII/interfaces.c 2004-07-23 02:55:41.000000000 +0200 ++++ net-snmp-5.1.2-5/agent/mibgroup/mibII/interfaces.c 2005-03-13 16:17:21.000000000 +0100 +@@ -1512,14 +1512,28 @@ + struct ifreq ifrq; + struct ifnet **ifnetaddr_ptr; + FILE *devin; +- unsigned long rec_pkt, rec_oct, rec_err, rec_drop; +- unsigned long snd_pkt, snd_oct, snd_err, snd_drop, coll; + int i, fd; + conf_if_list *if_ptr; ++#ifdef SCNuMAX ++ uintmax_t rec_pkt, rec_oct, rec_err, rec_drop, rec_mcast; ++ uintmax_t snd_pkt, snd_oct, snd_err, snd_drop, coll; ++ const char *scan_line_2_2 = ++ "%" SCNuMAX " %" SCNuMAX " %" SCNuMAX " %" SCNuMAX ++ " %*" SCNuMAX " %*" SCNuMAX " %*" SCNuMAX " %*" SCNuMAX ++ " %" SCNuMAX " %" SCNuMAX " %" SCNuMAX " %" SCNuMAX ++ " %*" SCNuMAX " %" SCNuMAX; ++ const char *scan_line_2_0 = ++ "%" SCNuMAX " %" SCNuMAX " %*" SCNuMAX " %*" SCNuMAX ++ " %*" SCNuMAX " %" SCNuMAX " %" SCNuMAX " %*" SCNuMAX ++ " %*" SCNuMAX " %" SCNuMAX; ++#else ++ unsigned long rec_pkt, rec_oct, rec_err, rec_drop; ++ unsigned long snd_pkt, snd_oct, snd_err, snd_drop, coll; + const char *scan_line_2_2 = + "%lu %lu %lu %lu %*lu %*lu %*lu %*lu %lu %lu %lu %lu %*lu %lu"; + const char *scan_line_2_0 = + "%lu %lu %*lu %*lu %*lu %lu %lu %*lu %*lu %lu"; ++#endif + const char *scan_line_to_use; + struct timeval et; /* elapsed time */ + +@@ -1598,6 +1612,10 @@ + struct ifnet *nnew; + char *stats, *ifstart = line; + ++ /* Ignore interfaces with no statistics. */ ++ if (strstr(line, "No statistics available.")) ++ continue; ++ + if (line[strlen(line) - 1] == '\n') + line[strlen(line) - 1] = '\0'; + +@@ -1631,7 +1649,7 @@ + &coll) != 5)) { + if ((scan_line_to_use == scan_line_2_2) + && !strstr(line, "No statistics available")) +- snmp_log(LOG_ERR, ++ snmp_log(LOG_DEBUG, + "/proc/net/dev data format error, line ==|%s|", + line); + continue; +diff -ruN net-snmp-5.1.2-orig/agent/mibgroup/smux/smux.c net-snmp-5.1.2-5/agent/mibgroup/smux/smux.c +--- net-snmp-5.1.2-orig/agent/mibgroup/smux/smux.c 2004-02-04 12:25:20.000000000 +0100 ++++ net-snmp-5.1.2-5/agent/mibgroup/smux/smux.c 2005-03-13 16:17:21.000000000 +0100 +@@ -819,14 +819,14 @@ + passwd[string_len] = '\0'; + if (!smux_auth_peer(oid_name, oid_name_len, passwd, fd)) { + snmp_log(LOG_WARNING, +- "refused smux peer: oid %s, password %s, descr %s\n", +- oid_print, passwd, descr); ++ "refused smux peer: oid %s, descr %s\n", ++ oid_print, descr); + *fail = TRUE; + return ptr; + } + snmp_log(LOG_INFO, +- "accepted smux peer: oid %s, password %s, descr %s\n", +- oid_print, passwd, descr); ++ "accepted smux peer: oid %s, descr %s\n", ++ oid_print, descr); + *fail = FALSE; + return ptr; + } +diff -ruN net-snmp-5.1.2-orig/apps/Makefile.in net-snmp-5.1.2-5/apps/Makefile.in +--- net-snmp-5.1.2-orig/apps/Makefile.in 2004-03-09 16:51:28.000000000 +0100 ++++ net-snmp-5.1.2-5/apps/Makefile.in 2005-03-13 16:17:21.000000000 +0100 +@@ -129,7 +129,7 @@ + $(LINK) -o $@ snmpdf.$(OSUFFIX) $(LOCAL_LIBS) ${LDFLAGS} ${LIBS} + + libnetsnmptrapd.$(LIB_EXTENSION)$(LIB_VERSION): $(LLIBTRAPD_OBJS) +- $(LIB_LD_CMD) libnetsnmptrapd.$(LIB_EXTENSION)$(LIB_VERSION) ${LLIBTRAPD_OBJS} $(LIB_LD_LIBS) ++ $(LIB_LD_CMD) libnetsnmptrapd.$(LIB_EXTENSION)$(LIB_VERSION) ${LLIBTRAPD_OBJS} $(LIB_LD_LIBS) $(TRAPD_RELINK_LIBS) + $(RANLIB) libnetsnmptrapd.$(LIB_EXTENSION)$(LIB_VERSION) + + snmpinforminstall: +diff -ruN net-snmp-5.1.2-orig/apps/snmpnetstat/if.c net-snmp-5.1.2-5/apps/snmpnetstat/if.c +--- net-snmp-5.1.2-orig/apps/snmpnetstat/if.c 2002-04-20 09:30:10.000000000 +0200 ++++ net-snmp-5.1.2-5/apps/snmpnetstat/if.c 2005-03-13 16:17:21.000000000 +0100 +@@ -300,8 +300,9 @@ + case IFINDEX: + ifindex = *var->val.integer; + for (cur_if = if_table; +- cur_if->ifindex != ifindex && cur_if->ifindex != 0; +- cur_if++); ++ cur_if < (if_table + cfg_nnets) && ++ cur_if->ifindex != ifindex && ++ cur_if->ifindex != 0; cur_if++); + if (cur_if >= (if_table + cfg_nnets)) { + fprintf(stderr, + "Inconsistent reponse from server. Aborting\n"); +@@ -492,8 +493,14 @@ + case IPIFINDEX: + ifindex = *var->val.integer; + for (cur_if = if_table; +- cur_if->ifindex != ifindex && cur_if->ifindex != 0; +- cur_if++); ++ cur_if < (if_table + cfg_nnets) && ++ cur_if->ifindex != ifindex && ++ cur_if->ifindex != 0; cur_if++); ++ if (cur_if >= (if_table + cfg_nnets)) { ++ fprintf(stderr, ++ "Inconsistent reponse from server. Aborting.\n"); ++ exit(0); ++ } + cur_if->ifindex = ifindex; + break; + case IPADDR: +@@ -567,8 +574,14 @@ + case IFINDEX: + ifindex = *var->val.integer; + for (cur_if = if_table; +- cur_if->ifindex != ifindex && cur_if->ifindex != 0; +- cur_if++); ++ cur_if < (if_table + cfg_nnets) && ++ cur_if->ifindex != ifindex && ++ cur_if->ifindex != 0; cur_if++); ++ if (cur_if >= (if_table + cfg_nnets)) { ++ fprintf(stderr, ++ "Inconsistent reponse from server. Aborting.\n"); ++ exit(0); ++ } + cur_if->ifindex = ifindex; + break; + case INOCTETS: +diff -ruN net-snmp-5.1.2-orig/configure.in net-snmp-5.1.2-5/configure.in +--- net-snmp-5.1.2-orig/configure.in 2004-06-23 00:06:40.000000000 +0200 ++++ net-snmp-5.1.2-5/configure.in 2005-03-13 16:17:21.000000000 +0100 +@@ -161,6 +161,9 @@ + AC_DEFINE(SNMP_NO_DEBUGGING) + fi + ++AC_ARG_WITH(rpm, ++[ --without-rpm Don't use RPM even if available.]) ++ + AC_ARG_WITH(dmalloc, + [ --with-dmalloc=PATH Use dmalloc library (www.dmalloc.com)], + if test "x$withval" = "xyes"; then +@@ -1539,12 +1542,13 @@ + AC_CHECK_LIB(RSAglue, RSA_PKCS1_RSAref) + fi + +- AC_CHECK_LIB(crypto, EVP_md5) ++ AC_CHECK_LIB(crypto, EVP_md5, [CRYPTOLIBS=-lcrypto], , ) + AC_CHECK_FUNCS(AES_cfb128_encrypt) + fi + elif test "x$askedpkcs" = "xyes"; then + AC_CHECK_LIB(pkcs11, C_Initialize) + fi ++AC_SUBST(CRYPTOLIBS) + + # Check for libraries that the agent needs + # saving old libraries +@@ -1664,8 +1668,9 @@ + # Replace `main' with a function in -lkvm: + AC_CHECK_LIB(kvm, kvm_read) + # DYNAMIC MODULE SUPPORT +-AC_CHECK_LIB(dl, dlopen) +-AC_CHECK_FUNCS(dlopen) ++AC_CHECK_FUNC(dlopen, AC_DEFINE(HAVE_DLOPEN), ++ AC_CHECK_LIB(dl, dlopen, AC_DEFINE(HAVE_DLOPEN) ++ LIBS="${LIBS} -ldl")) + + AC_CHECK_FUNCS(kvm_openfiles nlist knlist kvm_getprocs) + echo "$with_mib_modules" | grep "ucd-snmp/diskio" >/dev/null +@@ -1979,7 +1984,7 @@ + + AC_MSG_RESULT([$ac_cv_type_ssize_t]) + if test $ac_cv_type_ssize_t = yes; then +- AC_DEFINE(HAVE_SSIZE_T) ++ AC_DEFINE(HAVE_SSIZE_T, 1, [Define if type ssize_t is available]) + fi + + # Check ps args +diff -ruN net-snmp-5.1.2-orig/debian/README.Debian net-snmp-5.1.2-5/debian/README.Debian +diff -ruN net-snmp-5.1.2-orig/debian/changelog net-snmp-5.1.2-5/debian/changelog +diff -ruN net-snmp-5.1.2-orig/debian/control net-snmp-5.1.2-5/debian/control +diff -ruN net-snmp-5.1.2-orig/debian/copyright net-snmp-5.1.2-5/debian/copyright +diff -ruN net-snmp-5.1.2-orig/debian/fixman net-snmp-5.1.2-5/debian/fixman +diff -ruN net-snmp-5.1.2-orig/debian/libsnmp-base.dirs net-snmp-5.1.2-5/debian/libsnmp-base.dirs +diff -ruN net-snmp-5.1.2-orig/debian/libsnmp-base.docs net-snmp-5.1.2-5/debian/libsnmp-base.docs +diff -ruN net-snmp-5.1.2-orig/debian/libsnmp-base.files net-snmp-5.1.2-5/debian/libsnmp-base.files +diff -ruN net-snmp-5.1.2-orig/debian/libsnmp-base.postrm net-snmp-5.1.2-5/debian/libsnmp-base.postrm +diff -ruN net-snmp-5.1.2-orig/debian/libsnmp-base.prerm net-snmp-5.1.2-5/debian/libsnmp-base.prerm +diff -ruN net-snmp-5.1.2-orig/debian/libsnmp-perl.docs net-snmp-5.1.2-5/debian/libsnmp-perl.docs +diff -ruN net-snmp-5.1.2-orig/debian/libsnmp-perl.files net-snmp-5.1.2-5/debian/libsnmp-perl.files +diff -ruN net-snmp-5.1.2-orig/debian/libsnmp5-dev.files net-snmp-5.1.2-5/debian/libsnmp5-dev.files +diff -ruN net-snmp-5.1.2-orig/debian/libsnmp5-dev.manpages net-snmp-5.1.2-5/debian/libsnmp5-dev.manpages +diff -ruN net-snmp-5.1.2-orig/debian/libsnmp5.dirs net-snmp-5.1.2-5/debian/libsnmp5.dirs +diff -ruN net-snmp-5.1.2-orig/debian/libsnmp5.docs net-snmp-5.1.2-5/debian/libsnmp5.docs +diff -ruN net-snmp-5.1.2-orig/debian/libsnmp5.files net-snmp-5.1.2-5/debian/libsnmp5.files +diff -ruN net-snmp-5.1.2-orig/debian/libsnmp5.postinst net-snmp-5.1.2-5/debian/libsnmp5.postinst +diff -ruN net-snmp-5.1.2-orig/debian/libsnmp5.prerm net-snmp-5.1.2-5/debian/libsnmp5.prerm +diff -ruN net-snmp-5.1.2-orig/debian/manpages/encode_keychange.1 net-snmp-5.1.2-5/debian/manpages/encode_keychange.1 +diff -ruN net-snmp-5.1.2-orig/debian/manpages/net-snmp-config.1 net-snmp-5.1.2-5/debian/manpages/net-snmp-config.1 +diff -ruN net-snmp-5.1.2-orig/debian/manpages/snmpvacm.1 net-snmp-5.1.2-5/debian/manpages/snmpvacm.1 +diff -ruN net-snmp-5.1.2-orig/debian/manpages/tkmib.1 net-snmp-5.1.2-5/debian/manpages/tkmib.1 +diff -ruN net-snmp-5.1.2-orig/debian/rules net-snmp-5.1.2-5/debian/rules +diff -ruN net-snmp-5.1.2-orig/debian/snmp.files net-snmp-5.1.2-5/debian/snmp.files +diff -ruN net-snmp-5.1.2-orig/debian/snmp.manpages net-snmp-5.1.2-5/debian/snmp.manpages +diff -ruN net-snmp-5.1.2-orig/debian/snmp.preinst net-snmp-5.1.2-5/debian/snmp.preinst +diff -ruN net-snmp-5.1.2-orig/debian/snmpd.default net-snmp-5.1.2-5/debian/snmpd.default +diff -ruN net-snmp-5.1.2-orig/debian/snmpd.files net-snmp-5.1.2-5/debian/snmpd.files +diff -ruN net-snmp-5.1.2-orig/debian/snmpd.init net-snmp-5.1.2-5/debian/snmpd.init +diff -ruN net-snmp-5.1.2-orig/debian/snmpd.postinst net-snmp-5.1.2-5/debian/snmpd.postinst +diff -ruN net-snmp-5.1.2-orig/debian/snmpd.postrm net-snmp-5.1.2-5/debian/snmpd.postrm +diff -ruN net-snmp-5.1.2-orig/debian/tkmib.docs net-snmp-5.1.2-5/debian/tkmib.docs +diff -ruN net-snmp-5.1.2-orig/debian/tkmib.files net-snmp-5.1.2-5/debian/tkmib.files +diff -ruN net-snmp-5.1.2-orig/debian/tkmib.manpages net-snmp-5.1.2-5/debian/tkmib.manpages +diff -ruN net-snmp-5.1.2-orig/debian/watch net-snmp-5.1.2-5/debian/watch +diff -ruN net-snmp-5.1.2-orig/ipkg/libsnmp/CONTROL/control net-snmp-5.1.2-5/ipkg/libsnmp/CONTROL/control +diff -ruN net-snmp-5.1.2-orig/ipkg/libsnmp-dev/CONTROL/control net-snmp-5.1.2-5/ipkg/libsnmp-dev/CONTROL/control +diff -ruN net-snmp-5.1.2-orig/ipkg/rules net-snmp-5.1.2-5/ipkg/rules +diff -ruN net-snmp-5.1.2-orig/ipkg/snmp-utils/CONTROL/control net-snmp-5.1.2-5/ipkg/snmp-utils/CONTROL/control +diff -ruN net-snmp-5.1.2-orig/ipkg/snmpd/CONTROL/conffiles net-snmp-5.1.2-5/ipkg/snmpd/CONTROL/conffiles +diff -ruN net-snmp-5.1.2-orig/ipkg/snmpd/CONTROL/control net-snmp-5.1.2-5/ipkg/snmpd/CONTROL/control +diff -ruN net-snmp-5.1.2-orig/ipkg/snmpd/etc/default/snmpd net-snmp-5.1.2-5/ipkg/snmpd/etc/default/snmpd +diff -ruN net-snmp-5.1.2-orig/ipkg/snmpd/etc/init.d/snmpd net-snmp-5.1.2-5/ipkg/snmpd/etc/init.d/snmpd +diff -ruN net-snmp-5.1.2-orig/ipkg/snmpd/etc/snmp/snmpd.conf net-snmp-5.1.2-5/ipkg/snmpd/etc/snmp/snmpd.conf +diff -ruN net-snmp-5.1.2-orig/ipkg/snmpd-static/CONTROL/control net-snmp-5.1.2-5/ipkg/snmpd-static/CONTROL/control +diff -ruN net-snmp-5.1.2-orig/ipkg/version net-snmp-5.1.2-5/ipkg/version +diff -ruN net-snmp-5.1.2-orig/local/Makefile.in net-snmp-5.1.2-5/local/Makefile.in +--- net-snmp-5.1.2-orig/local/Makefile.in 2003-12-20 05:38:17.000000000 +0100 ++++ net-snmp-5.1.2-5/local/Makefile.in 2005-03-13 16:17:21.000000000 +0100 +@@ -58,7 +58,7 @@ + + mib2c.made: $(srcdir)/mib2c + if test "x$(PERLPROG)" != "x" ; then \ +- $(PERLPROG) -p -e 's%^#!.*/perl.*%#!$(PERLPROG)%;s#/usr/local/share/snmp#$(snmplibdir)#;' ${srcdir}/mib2c > mib2c.made; \ ++ $(PERLPROG) -p -e 's%^#!.*/perl.*%#!$(PERLPROG)%;s#/usr/local/share/snmp#$(snmplibdir)#;s#/usr/local/etc/snmp#$(SNMPCONFPATH)#;' ${srcdir}/mib2c > mib2c.made; \ + else \ + touch mib2c.made; \ + fi +diff -ruN net-snmp-5.1.2-orig/local/mib2c net-snmp-5.1.2-5/local/mib2c +--- net-snmp-5.1.2-orig/local/mib2c 2004-06-15 16:26:37.000000000 +0200 ++++ net-snmp-5.1.2-5/local/mib2c 2005-03-13 16:17:21.000000000 +0100 +@@ -56,7 +56,8 @@ + if($ENV{MIB2C_DIR}) { + push @def_search_dirs, $ENV{MIB2C_DIR}; + } +-push @def_search_dirs, "/usr/local/share/snmp/"; ++push @def_search_dirs, "/etc/snmp/"; ++push @def_search_dirs, "/usr/share/snmp/"; + + + sub usage { +diff -ruN net-snmp-5.1.2-orig/man/mib2c.1.def net-snmp-5.1.2-5/man/mib2c.1.def +--- net-snmp-5.1.2-orig/man/mib2c.1.def 2003-10-02 20:04:19.000000000 +0200 ++++ net-snmp-5.1.2-5/man/mib2c.1.def 2005-03-13 16:17:21.000000000 +0100 +@@ -72,8 +72,9 @@ + .TP + .BI -c " CONFIGFILE" + Use CONFIGFILE when generating code. These files will be searched for +-first in the current directory and then in the DATADIR directory +-(which is where the default mib2c configuration files can be found). ++first in the current directory and then in /etc/snmp ++(which is where the default mib2c configuration files can be found) ++and finally in the DATADIR directory. + Running mib2c without the -c CONFIGFILE option will display + a description of the valid values for CONFIGFILE, that is, + the available config files, including new ones that you might +diff -ruN net-snmp-5.1.2-orig/man/mib_api.3.def net-snmp-5.1.2-5/man/mib_api.3.def +--- net-snmp-5.1.2-orig/man/mib_api.3.def 2004-04-15 00:41:32.000000000 +0200 ++++ net-snmp-5.1.2-5/man/mib_api.3.def 2005-03-13 16:17:21.000000000 +0100 +@@ -5,7 +5,7 @@ + add_module_replacement, + read_module, read_mib, read_all_mibs, + read_objid, read_module_node, +-get_module_node, read_objid ++get_module_node + snmp_set_mib_warnings, snmp_set_save_descriptions, + shutdown_mib, + print_mib, +@@ -34,9 +34,9 @@ + .PP + .BI "void print_mib(FILE *" "fp" ); + .PP +-.BI "int read_objid(char *" "input" ", oid *" "output" ", int *" "out_len" ); ++.BI "int read_objid(char *" "input" ", oid *" "output" ", size_t *" "out_len" ); + .br +-.BI "int get_module_node(char *" "name" ", char *" "module" ", oid *" "objid" ", int *" "objidlen" ); ++.BI "int get_module_node(char *" "name" ", char *" "module" ", oid *" "objid" ", size_t *" "objidlen" ); + .PP + .BI "void print_variable(const oid *" "objid" ", size_t " "objidlen" ", struct variable_list *" "variable" ); + .br +diff -ruN net-snmp-5.1.2-orig/man/snmp_config.5.def net-snmp-5.1.2-5/man/snmp_config.5.def +--- net-snmp-5.1.2-orig/man/snmp_config.5.def 2003-12-10 11:41:41.000000000 +0100 ++++ net-snmp-5.1.2-5/man/snmp_config.5.def 2005-03-13 16:17:21.000000000 +0100 +@@ -11,7 +11,7 @@ + found and read from. By default, the applications look for + configuration files in the following 4 directories, in order: + SYSCONFDIR/snmp, +-DATADIR/snmp, LIBDIR/snmp, and $HOME/.snmp. In each of these ++/etc/snmp, LIBDIR/snmp, and $HOME/.snmp. In each of these + directories, it looks for files with the extension of both + .IR conf " and " local.conf + (reading the second ones last). In this manner, there are +diff -ruN net-snmp-5.1.2-orig/man/snmp_trap_api.3.def net-snmp-5.1.2-5/man/snmp_trap_api.3.def +--- net-snmp-5.1.2-orig/man/snmp_trap_api.3.def 2003-09-29 04:58:18.000000000 +0200 ++++ net-snmp-5.1.2-5/man/snmp_trap_api.3.def 2005-03-13 16:17:21.000000000 +0100 +@@ -1,8 +1,7 @@ + .TH SNMP_TRAP_API 3 "7 Mar 2002" VVERSIONINFO "Net-SNMP" + .UC 5 + .SH NAME +-send_easy_trap, send_trap_vars, send_v2trap - send TRAPs or INFORMs +-from a Net-SNMP MIB module ++send_easy_trap, send_trap_vars, send_v2trap - send TRAPs or INFORMs from a Net-SNMP MIB module + .SH SYNOPSIS + .B #include + .PP +diff -ruN net-snmp-5.1.2-orig/mibs/BGP4-MIB.txt net-snmp-5.1.2-5/mibs/BGP4-MIB.txt +--- net-snmp-5.1.2-orig/mibs/BGP4-MIB.txt 1970-01-01 01:00:00.000000000 +0100 ++++ net-snmp-5.1.2-5/mibs/BGP4-MIB.txt 2005-03-13 16:17:21.000000000 +0100 +@@ -0,0 +1,929 @@ ++ BGP4-MIB DEFINITIONS ::= BEGIN ++ ++ IMPORTS ++ MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, ++ IpAddress, Integer32, Counter32, Gauge32, mib-2 ++ FROM SNMPv2-SMI ++ MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP ++ FROM SNMPv2-CONF; ++ ++ bgp MODULE-IDENTITY ++ LAST-UPDATED "9902100000Z" ++ ORGANIZATION "IETF IDR Working Group" ++ CONTACT-INFO "E-mail: idr@merit.net ++ ++ Susan Hares (Editor) ++ Merit Network ++ 4251 Plymouth Road ++ Suite C ++ Ann Arbor, MI 48105-2785 ++ Tel: +1 734 936 2095 ++ Fax: +1 734 647 3185 ++ E-mail: skh@merit.edu ++ ++ Jeff Johnson (Editor) ++ RedBack Networks, Inc. ++ 1389 Moffett Park Drive ++ Sunnyvale, CA 94089-1134 ++ Tel: +1 408 548 3516 ++ Fax: +1 408 548 3599 ++ E-mail: jeff@redback.com" ++ DESCRIPTION ++ "The MIB module for BGP-4." ++ REVISION "9902100000Z" ++ DESCRIPTION ++ "Corrected duplicate OBJECT IDENTIFIER ++ assignment in the conformance information." ++ REVISION "9601080000Z" ++ DESCRIPTION ++ "1) Fixed the definitions of the traps to ++ make them equivalent to their initial ++ definition in RFC 1269. ++ 2) Added compliance and conformance info." ++ ::= { mib-2 15 } ++ ++ bgpVersion OBJECT-TYPE ++ SYNTAX OCTET STRING (SIZE (1..255)) ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "Vector of supported BGP protocol version ++ numbers. Each peer negotiates the version ++ from this vector. Versions are identified ++ via the string of bits contained within this ++ object. The first octet contains bits 0 to ++ 7, the second octet contains bits 8 to 15, ++ and so on, with the most significant bit ++ referring to the lowest bit number in the ++ octet (e.g., the MSB of the first octet ++ refers to bit 0). If a bit, i, is present ++ and set, then the version (i+1) of the BGP ++ is supported." ++ ::= { bgp 1 } ++ ++ bgpLocalAs OBJECT-TYPE ++ SYNTAX INTEGER (0..65535) ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The local autonomous system number." ++ ::= { bgp 2 } ++ ++ ++ ++ -- BGP Peer table. This table contains, one entry per BGP ++ -- peer, information about the BGP peer. ++ ++ bgpPeerTable OBJECT-TYPE ++ SYNTAX SEQUENCE OF BgpPeerEntry ++ MAX-ACCESS not-accessible ++ STATUS current ++ DESCRIPTION ++ "BGP peer table. This table contains, ++ one entry per BGP peer, information about the ++ connections with BGP peers." ++ ::= { bgp 3 } ++ ++ bgpPeerEntry OBJECT-TYPE ++ SYNTAX BgpPeerEntry ++ MAX-ACCESS not-accessible ++ STATUS current ++ DESCRIPTION ++ "Entry containing information about the ++ connection with a BGP peer." ++ INDEX { bgpPeerRemoteAddr } ++ ::= { bgpPeerTable 1 } ++ ++ BgpPeerEntry ::= SEQUENCE { ++ bgpPeerIdentifier ++ IpAddress, ++ bgpPeerState ++ INTEGER, ++ bgpPeerAdminStatus ++ INTEGER, ++ bgpPeerNegotiatedVersion ++ Integer32, ++ bgpPeerLocalAddr ++ IpAddress, ++ bgpPeerLocalPort ++ INTEGER, ++ bgpPeerRemoteAddr ++ IpAddress, ++ bgpPeerRemotePort ++ INTEGER, ++ bgpPeerRemoteAs ++ INTEGER, ++ bgpPeerInUpdates ++ Counter32, ++ bgpPeerOutUpdates ++ Counter32, ++ bgpPeerInTotalMessages ++ Counter32, ++ bgpPeerOutTotalMessages ++ Counter32, ++ bgpPeerLastError ++ OCTET STRING, ++ bgpPeerFsmEstablishedTransitions ++ Counter32, ++ bgpPeerFsmEstablishedTime ++ Gauge32, ++ bgpPeerConnectRetryInterval ++ INTEGER, ++ bgpPeerHoldTime ++ INTEGER, ++ bgpPeerKeepAlive ++ INTEGER, ++ bgpPeerHoldTimeConfigured ++ INTEGER, ++ bgpPeerKeepAliveConfigured ++ INTEGER, ++ bgpPeerMinASOriginationInterval ++ INTEGER, ++ bgpPeerMinRouteAdvertisementInterval ++ INTEGER, ++ bgpPeerInUpdateElapsedTime ++ Gauge32 ++ } ++ ++ bgpPeerIdentifier OBJECT-TYPE ++ SYNTAX IpAddress ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The BGP Identifier of this entry's BGP peer." ++ ::= { bgpPeerEntry 1 } ++ ++ bgpPeerState OBJECT-TYPE ++ SYNTAX INTEGER { ++ idle(1), ++ connect(2), ++ active(3), ++ opensent(4), ++ openconfirm(5), ++ established(6) ++ } ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The BGP peer connection state." ++ ::= { bgpPeerEntry 2 } ++ ++ bgpPeerAdminStatus OBJECT-TYPE ++ SYNTAX INTEGER { ++ stop(1), ++ start(2) ++ } ++ MAX-ACCESS read-write ++ STATUS current ++ DESCRIPTION ++ "The desired state of the BGP connection. A ++ transition from 'stop' to 'start' will cause ++ the BGP Start Event to be generated. A ++ transition from 'start' to 'stop' will cause ++ the BGP Stop Event to be generated. This ++ parameter can be used to restart BGP peer ++ connections. Care should be used in providing ++ write access to this object without adequate ++ authentication." ++ ::= { bgpPeerEntry 3 } ++ ++ bgpPeerNegotiatedVersion OBJECT-TYPE ++ SYNTAX Integer32 ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The negotiated version of BGP running between ++ the two peers." ++ ::= { bgpPeerEntry 4 } ++ ++ bgpPeerLocalAddr OBJECT-TYPE ++ SYNTAX IpAddress ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The local IP address of this entry's BGP ++ connection." ++ ::= { bgpPeerEntry 5 } ++ ++ bgpPeerLocalPort OBJECT-TYPE ++ SYNTAX INTEGER (0..65535) ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The local port for the TCP connection between ++ the BGP peers." ++ ::= { bgpPeerEntry 6 } ++ ++ bgpPeerRemoteAddr OBJECT-TYPE ++ SYNTAX IpAddress ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The remote IP address of this entry's BGP ++ peer." ++ ::= { bgpPeerEntry 7 } ++ ++ bgpPeerRemotePort OBJECT-TYPE ++ SYNTAX INTEGER (0..65535) ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The remote port for the TCP connection between ++ the BGP peers. Note that the objects ++ bgpPeerLocalAddr, bgpPeerLocalPort, ++ bgpPeerRemoteAddr and bgpPeerRemotePort ++ provide the appropriate reference to the ++ standard MIB TCP connection table." ++ ::= { bgpPeerEntry 8 } ++ ++ bgpPeerRemoteAs OBJECT-TYPE ++ SYNTAX INTEGER (0..65535) ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The remote autonomous system number." ++ ::= { bgpPeerEntry 9 } ++ ++ bgpPeerInUpdates OBJECT-TYPE ++ SYNTAX Counter32 ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The number of BGP UPDATE messages received on ++ this connection. This object should be ++ initialized to zero (0) when the connection is ++ established." ++ ::= { bgpPeerEntry 10 } ++ ++ bgpPeerOutUpdates OBJECT-TYPE ++ SYNTAX Counter32 ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The number of BGP UPDATE messages transmitted ++ on this connection. This object should be ++ initialized to zero (0) when the connection is ++ established." ++ ::= { bgpPeerEntry 11 } ++ ++ bgpPeerInTotalMessages OBJECT-TYPE ++ SYNTAX Counter32 ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The total number of messages received from the ++ remote peer on this connection. This object ++ should be initialized to zero when the ++ connection is established." ++ ::= { bgpPeerEntry 12 } ++ ++ bgpPeerOutTotalMessages OBJECT-TYPE ++ SYNTAX Counter32 ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The total number of messages transmitted to ++ the remote peer on this connection. This object ++ should be initialized to zero when the ++ connection is established." ++ ::= { bgpPeerEntry 13 } ++ ++ bgpPeerLastError OBJECT-TYPE ++ SYNTAX OCTET STRING (SIZE (2)) ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The last error code and subcode seen by this ++ peer on this connection. If no error has ++ occurred, this field is zero. Otherwise, the ++ first byte of this two byte OCTET STRING ++ contains the error code, and the second byte ++ contains the subcode." ++ ::= { bgpPeerEntry 14 } ++ ++ bgpPeerFsmEstablishedTransitions OBJECT-TYPE ++ SYNTAX Counter32 ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The total number of times the BGP FSM ++ transitioned into the established state." ++ ::= { bgpPeerEntry 15 } ++ ++ bgpPeerFsmEstablishedTime OBJECT-TYPE ++ SYNTAX Gauge32 ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "This timer indicates how long (in seconds) this ++ peer has been in the Established state or how long ++ since this peer was last in the Established state. ++ It is set to zero when a new peer is configured or ++ the router is booted." ++ ::= { bgpPeerEntry 16 } ++ ++ bgpPeerConnectRetryInterval OBJECT-TYPE ++ SYNTAX INTEGER (1..65535) ++ MAX-ACCESS read-write ++ STATUS current ++ DESCRIPTION ++ "Time interval in seconds for the ConnectRetry ++ timer. The suggested value for this timer is ++ 120 seconds." ++ ::= { bgpPeerEntry 17 } ++ ++ bgpPeerHoldTime OBJECT-TYPE ++ SYNTAX INTEGER ( 0 | 3..65535 ) ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "Time interval in seconds for the Hold Timer ++ established with the peer. The value of this ++ object is calculated by this BGP speaker by ++ using the smaller of the value in ++ bgpPeerHoldTimeConfigured and the Hold Time ++ received in the OPEN message. This value ++ must be at lease three seconds if it is not ++ zero (0) in which case the Hold Timer has ++ not been established with the peer, or, the ++ value of bgpPeerHoldTimeConfigured is zero (0)." ++ ::= { bgpPeerEntry 18 } ++ ++ bgpPeerKeepAlive OBJECT-TYPE ++ SYNTAX INTEGER ( 0 | 1..21845 ) ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "Time interval in seconds for the KeepAlive ++ timer established with the peer. The value of ++ this object is calculated by this BGP speaker ++ such that, when compared with bgpPeerHoldTime, ++ it has the same proportion as what ++ bgpPeerKeepAliveConfigured has when compared ++ with bgpPeerHoldTimeConfigured. If the value ++ of this object is zero (0), it indicates that ++ the KeepAlive timer has not been established ++ with the peer, or, the value of ++ bgpPeerKeepAliveConfigured is zero (0)." ++ ::= { bgpPeerEntry 19 } ++ ++ bgpPeerHoldTimeConfigured OBJECT-TYPE ++ SYNTAX INTEGER ( 0 | 3..65535 ) ++ MAX-ACCESS read-write ++ STATUS current ++ DESCRIPTION ++ "Time interval in seconds for the Hold Time ++ configured for this BGP speaker with this peer. ++ This value is placed in an OPEN message sent to ++ this peer by this BGP speaker, and is compared ++ with the Hold Time field in an OPEN message ++ received from the peer when determining the Hold ++ Time (bgpPeerHoldTime) with the peer. This value ++ must not be less than three seconds if it is not ++ zero (0) in which case the Hold Time is NOT to be ++ established with the peer. The suggested value for ++ this timer is 90 seconds." ++ ::= { bgpPeerEntry 20 } ++ ++ bgpPeerKeepAliveConfigured OBJECT-TYPE ++ SYNTAX INTEGER ( 0 | 1..21845 ) ++ MAX-ACCESS read-write ++ STATUS current ++ DESCRIPTION ++ "Time interval in seconds for the KeepAlive timer ++ configured for this BGP speaker with this peer. ++ The value of this object will only determine the ++ KEEPALIVE messages' frequency relative to the value ++ specified in bgpPeerHoldTimeConfigured; the actual ++ time interval for the KEEPALIVE messages is ++ indicated by bgpPeerKeepAlive. A reasonable ++ maximum value for this timer would be configured to ++ be one third of that of bgpPeerHoldTimeConfigured. ++ If the value of this object is zero (0), no ++ periodical KEEPALIVE messages are sent to the peer ++ after the BGP connection has been established. The ++ suggested value for this timer is 30 seconds." ++ ::= { bgpPeerEntry 21 } ++ ++ bgpPeerMinASOriginationInterval OBJECT-TYPE ++ SYNTAX INTEGER (1..65535) ++ MAX-ACCESS read-write ++ STATUS current ++ DESCRIPTION ++ "Time interval in seconds for the ++ MinASOriginationInterval timer. ++ The suggested value for this timer is 15 seconds." ++ ::= { bgpPeerEntry 22 } ++ ++ bgpPeerMinRouteAdvertisementInterval OBJECT-TYPE ++ SYNTAX INTEGER (1..65535) ++ MAX-ACCESS read-write ++ STATUS current ++ DESCRIPTION ++ "Time interval in seconds for the ++ MinRouteAdvertisementInterval timer. ++ The suggested value for this timer is 30 seconds." ++ ::= { bgpPeerEntry 23 } ++ ++ bgpPeerInUpdateElapsedTime OBJECT-TYPE ++ SYNTAX Gauge32 ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "Elapsed time in seconds since the last BGP ++ UPDATE message was received from the peer. ++ Each time bgpPeerInUpdates is incremented, ++ the value of this object is set to zero (0)." ++ ::= { bgpPeerEntry 24 } ++ ++ ++ ++ bgpIdentifier OBJECT-TYPE ++ SYNTAX IpAddress ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The BGP Identifier of local system." ++ ::= { bgp 4 } ++ ++ ++ ++ -- Received Path Attribute Table. This table contains, ++ -- one entry per path to a network, path attributes ++ -- received from all peers running BGP version 3 or less. ++ -- This table is obsolete, having been replaced in ++ -- functionality with the bgp4PathAttrTable. ++ ++ bgpRcvdPathAttrTable OBJECT-TYPE ++ SYNTAX SEQUENCE OF BgpPathAttrEntry ++ MAX-ACCESS not-accessible ++ STATUS obsolete ++ DESCRIPTION ++ "The BGP Received Path Attribute Table contains ++ information about paths to destination networks ++ received from all peers running BGP version 3 or ++ less." ++ ::= { bgp 5 } ++ ++ bgpPathAttrEntry OBJECT-TYPE ++ SYNTAX BgpPathAttrEntry ++ MAX-ACCESS not-accessible ++ STATUS obsolete ++ DESCRIPTION ++ "Information about a path to a network." ++ INDEX { bgpPathAttrDestNetwork, ++ bgpPathAttrPeer } ++ ::= { bgpRcvdPathAttrTable 1 } ++ ++ BgpPathAttrEntry ::= SEQUENCE { ++ bgpPathAttrPeer ++ IpAddress, ++ bgpPathAttrDestNetwork ++ IpAddress, ++ bgpPathAttrOrigin ++ INTEGER, ++ bgpPathAttrASPath ++ OCTET STRING, ++ bgpPathAttrNextHop ++ IpAddress, ++ bgpPathAttrInterASMetric ++ Integer32 ++ } ++ ++ bgpPathAttrPeer OBJECT-TYPE ++ SYNTAX IpAddress ++ MAX-ACCESS read-only ++ STATUS obsolete ++ DESCRIPTION ++ "The IP address of the peer where the path ++ information was learned." ++ ::= { bgpPathAttrEntry 1 } ++ ++ bgpPathAttrDestNetwork OBJECT-TYPE ++ SYNTAX IpAddress ++ MAX-ACCESS read-only ++ STATUS obsolete ++ DESCRIPTION ++ "The address of the destination network." ++ ::= { bgpPathAttrEntry 2 } ++ ++ bgpPathAttrOrigin OBJECT-TYPE ++ SYNTAX INTEGER { ++ igp(1),-- networks are interior ++ egp(2),-- networks learned via EGP ++ incomplete(3) -- undetermined ++ } ++ MAX-ACCESS read-only ++ STATUS obsolete ++ DESCRIPTION ++ "The ultimate origin of the path information." ++ ::= { bgpPathAttrEntry 3 } ++ ++ bgpPathAttrASPath OBJECT-TYPE ++ SYNTAX OCTET STRING (SIZE (2..255)) ++ MAX-ACCESS read-only ++ STATUS obsolete ++ DESCRIPTION ++ "The set of ASs that must be traversed to reach ++ the network. This object is probably best ++ represented as SEQUENCE OF INTEGER. For SMI ++ compatibility, though, it is represented as ++ OCTET STRING. Each AS is represented as a pair ++ of octets according to the following algorithm: ++ ++ first-byte-of-pair = ASNumber / 256; ++ second-byte-of-pair = ASNumber & 255;" ++ ::= { bgpPathAttrEntry 4 } ++ ++ bgpPathAttrNextHop OBJECT-TYPE ++ SYNTAX IpAddress ++ MAX-ACCESS read-only ++ STATUS obsolete ++ DESCRIPTION ++ "The address of the border router that should ++ be used for the destination network." ++ ::= { bgpPathAttrEntry 5 } ++ ++ bgpPathAttrInterASMetric OBJECT-TYPE ++ SYNTAX Integer32 ++ MAX-ACCESS read-only ++ STATUS obsolete ++ DESCRIPTION ++ "The optional inter-AS metric. If this ++ attribute has not been provided for this route, ++ the value for this object is 0." ++ ::= { bgpPathAttrEntry 6 } ++ ++ ++ ++ -- BGP-4 Received Path Attribute Table. This table contains, ++ -- one entry per path to a network, path attributes ++ -- received from all peers running BGP-4. ++ ++ bgp4PathAttrTable OBJECT-TYPE ++ SYNTAX SEQUENCE OF Bgp4PathAttrEntry ++ MAX-ACCESS not-accessible ++ STATUS current ++ DESCRIPTION ++ "The BGP-4 Received Path Attribute Table contains ++ information about paths to destination networks ++ received from all BGP4 peers." ++ ::= { bgp 6 } ++ ++ bgp4PathAttrEntry OBJECT-TYPE ++ SYNTAX Bgp4PathAttrEntry ++ MAX-ACCESS not-accessible ++ STATUS current ++ DESCRIPTION ++ "Information about a path to a network." ++ INDEX { bgp4PathAttrIpAddrPrefix, ++ bgp4PathAttrIpAddrPrefixLen, ++ bgp4PathAttrPeer } ++ ::= { bgp4PathAttrTable 1 } ++ ++ Bgp4PathAttrEntry ::= SEQUENCE { ++ bgp4PathAttrPeer ++ IpAddress, ++ bgp4PathAttrIpAddrPrefixLen ++ INTEGER, ++ bgp4PathAttrIpAddrPrefix ++ IpAddress, ++ bgp4PathAttrOrigin ++ INTEGER, ++ bgp4PathAttrASPathSegment ++ OCTET STRING, ++ bgp4PathAttrNextHop ++ IpAddress, ++ bgp4PathAttrMultiExitDisc ++ INTEGER, ++ bgp4PathAttrLocalPref ++ INTEGER, ++ bgp4PathAttrAtomicAggregate ++ INTEGER, ++ bgp4PathAttrAggregatorAS ++ INTEGER, ++ bgp4PathAttrAggregatorAddr ++ IpAddress, ++ bgp4PathAttrCalcLocalPref ++ INTEGER, ++ bgp4PathAttrBest ++ INTEGER, ++ bgp4PathAttrUnknown ++ OCTET STRING ++ } ++ ++ bgp4PathAttrPeer OBJECT-TYPE ++ SYNTAX IpAddress ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The IP address of the peer where the path ++ information was learned." ++ ::= { bgp4PathAttrEntry 1 } ++ bgp4PathAttrIpAddrPrefixLen OBJECT-TYPE ++ SYNTAX INTEGER (0..32) ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "Length in bits of the IP address prefix in the ++ Network Layer Reachability Information field." ++ ::= { bgp4PathAttrEntry 2 } ++ ++ bgp4PathAttrIpAddrPrefix OBJECT-TYPE ++ SYNTAX IpAddress ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "An IP address prefix in the Network Layer ++ Reachability Information field. This object ++ is an IP address containing the prefix with ++ length specified by bgp4PathAttrIpAddrPrefixLen. ++ Any bits beyond the length specified by ++ bgp4PathAttrIpAddrPrefixLen are zeroed." ++ ::= { bgp4PathAttrEntry 3 } ++ ++ bgp4PathAttrOrigin OBJECT-TYPE ++ SYNTAX INTEGER { ++ igp(1),-- networks are interior ++ egp(2),-- networks learned via EGP ++ incomplete(3) -- undetermined ++ } ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The ultimate origin of the path information." ++ ::= { bgp4PathAttrEntry 4 } ++ ++ bgp4PathAttrASPathSegment OBJECT-TYPE ++ SYNTAX OCTET STRING (SIZE (2..255)) ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The sequence of AS path segments. Each AS ++ path segment is represented by a triple ++ . ++ ++ The type is a 1-octet field which has two ++ possible values: ++ 1 AS_SET: unordered set of ASs a ++ route in the UPDATE message ++ has traversed ++ 2 AS_SEQUENCE: ordered set of ASs ++ a route in the UPDATE message ++ has traversed. ++ ++ The length is a 1-octet field containing the ++ number of ASs in the value field. ++ ++ The value field contains one or more AS ++ numbers, each AS is represented in the octet ++ string as a pair of octets according to the ++ following algorithm: ++ ++ first-byte-of-pair = ASNumber / 256; ++ second-byte-of-pair = ASNumber & 255;" ++ ::= { bgp4PathAttrEntry 5 } ++ ++ bgp4PathAttrNextHop OBJECT-TYPE ++ SYNTAX IpAddress ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The address of the border router that should ++ be used for the destination network." ++ ::= { bgp4PathAttrEntry 6 } ++ ++ bgp4PathAttrMultiExitDisc OBJECT-TYPE ++ SYNTAX INTEGER (-1..2147483647) ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "This metric is used to discriminate between ++ multiple exit points to an adjacent autonomous ++ system. A value of -1 indicates the absence of ++ this attribute." ++ ::= { bgp4PathAttrEntry 7 } ++ ++ bgp4PathAttrLocalPref OBJECT-TYPE ++ SYNTAX INTEGER (-1..2147483647) ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The originating BGP4 speaker's degree of ++ preference for an advertised route. A value of ++ -1 indicates the absence of this attribute." ++ ::= { bgp4PathAttrEntry 8 } ++ ++ bgp4PathAttrAtomicAggregate OBJECT-TYPE ++ SYNTAX INTEGER { ++ lessSpecificRrouteNotSelected(1), ++ lessSpecificRouteSelected(2) ++ } ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "Whether or not a system has selected ++ a less specific route without selecting a ++ more specific route." ++ ::= { bgp4PathAttrEntry 9 } ++ ++ bgp4PathAttrAggregatorAS OBJECT-TYPE ++ SYNTAX INTEGER (0..65535) ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The AS number of the last BGP4 speaker that ++ performed route aggregation. A value of zero (0) ++ indicates the absence of this attribute." ++ ::= { bgp4PathAttrEntry 10 } ++ ++ bgp4PathAttrAggregatorAddr OBJECT-TYPE ++ SYNTAX IpAddress ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The IP address of the last BGP4 speaker that ++ performed route aggregation. A value of ++ 0.0.0.0 indicates the absence of this attribute." ++ ::= { bgp4PathAttrEntry 11 } ++ ++ bgp4PathAttrCalcLocalPref OBJECT-TYPE ++ SYNTAX INTEGER (-1..2147483647) ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The degree of preference calculated by the ++ receiving BGP4 speaker for an advertised route. ++ A value of -1 indicates the absence of this ++ attribute." ++ ::= { bgp4PathAttrEntry 12 } ++ ++ bgp4PathAttrBest OBJECT-TYPE ++ SYNTAX INTEGER { ++ false(1),-- not chosen as best route ++ true(2) -- chosen as best route ++ } ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "An indication of whether or not this route ++ was chosen as the best BGP4 route." ++ ::= { bgp4PathAttrEntry 13 } ++ ++ bgp4PathAttrUnknown OBJECT-TYPE ++ SYNTAX OCTET STRING (SIZE(0..255)) ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "One or more path attributes not understood ++ by this BGP4 speaker. Size zero (0) indicates ++ the absence of such attribute(s). Octets ++ beyond the maximum size, if any, are not ++ recorded by this object." ++ ::= { bgp4PathAttrEntry 14 } ++ ++ ++ -- Traps. ++ ++ -- note that in RFC 1657, bgpTraps was incorrectly ++ -- assigned a value of { bgp 7 }, and each of the ++ -- traps had the bgpPeerRemoteAddr object inappropriately ++ -- removed from their OBJECTS clause. The following ++ -- definitions restore the semantics of the traps as ++ -- they were initially defined in RFC 1269. ++ ++ -- { bgp 7 } is unused ++ ++ bgpTraps OBJECT IDENTIFIER ::= { bgp 0 } ++ ++ bgpEstablished NOTIFICATION-TYPE ++ OBJECTS { bgpPeerRemoteAddr, ++ bgpPeerLastError, ++ bgpPeerState } ++ STATUS current ++ DESCRIPTION ++ "The BGP Established event is generated when ++ the BGP FSM enters the ESTABLISHED state." ++ ::= { bgpTraps 1 } ++ ++ bgpBackwardTransition NOTIFICATION-TYPE ++ OBJECTS { bgpPeerRemoteAddr, ++ bgpPeerLastError, ++ bgpPeerState } ++ STATUS current ++ DESCRIPTION ++ "The BGPBackwardTransition Event is generated ++ when the BGP FSM moves from a higher numbered ++ state to a lower numbered state." ++ ::= { bgpTraps 2 } ++ ++ -- conformance information ++ ++ bgpMIBConformance OBJECT IDENTIFIER ::= { bgp 8 } ++ bgpMIBCompliances OBJECT IDENTIFIER ::= { bgpMIBConformance 1 } ++ bgpMIBGroups OBJECT IDENTIFIER ::= { bgpMIBConformance 2 } ++ ++ -- compliance statements ++ ++ bgpMIBCompliance MODULE-COMPLIANCE ++ STATUS current ++ DESCRIPTION ++ "The compliance statement for entities which ++ implement the BGP4 mib." ++ MODULE -- this module ++ MANDATORY-GROUPS { bgp4MIBGlobalsGroup, ++ bgp4MIBPeerGroup, ++ bgp4MIBPathAttrGroup, ++ bgp4MIBNotificationGroup } ++ ::= { bgpMIBCompliances 1 } ++ ++ -- units of conformance ++ ++ bgp4MIBGlobalsGroup OBJECT-GROUP ++ OBJECTS { bgpVersion, ++ bgpLocalAs, ++ bgpIdentifier } ++ STATUS current ++ DESCRIPTION ++ "A collection of objects providing information ++ on global BGP state." ++ ::= { bgpMIBGroups 1 } ++ ++ bgp4MIBPeerGroup OBJECT-GROUP ++ OBJECTS { bgpPeerIdentifier, ++ bgpPeerState, ++ bgpPeerAdminStatus, ++ bgpPeerNegotiatedVersion, ++ bgpPeerLocalAddr, ++ bgpPeerLocalPort, ++ bgpPeerRemoteAddr, ++ bgpPeerRemotePort, ++ bgpPeerRemoteAs, ++ bgpPeerInUpdates, ++ bgpPeerOutUpdates, ++ bgpPeerInTotalMessages, ++ bgpPeerOutTotalMessages, ++ bgpPeerLastError, ++ bgpPeerFsmEstablishedTransitions, ++ bgpPeerFsmEstablishedTime, ++ bgpPeerConnectRetryInterval, ++ bgpPeerHoldTime, ++ bgpPeerKeepAlive, ++ bgpPeerHoldTimeConfigured, ++ bgpPeerKeepAliveConfigured, ++ bgpPeerMinASOriginationInterval, ++ bgpPeerMinRouteAdvertisementInterval, ++ bgpPeerInUpdateElapsedTime } ++ STATUS current ++ DESCRIPTION ++ "A collection of objects for managing ++ BGP peers." ++ ::= { bgpMIBGroups 2 } ++ ++ bgp4MIBRcvdPathAttrGroup OBJECT-GROUP ++ OBJECTS { bgpPathAttrPeer, ++ bgpPathAttrDestNetwork, ++ bgpPathAttrOrigin, ++ bgpPathAttrASPath, ++ bgpPathAttrNextHop, ++ bgpPathAttrInterASMetric } ++ STATUS obsolete ++ DESCRIPTION ++ "A collection of objects for managing BGP ++ path entries. ++ ++ This conformance group is obsolete, ++ replaced by bgp4MIBPathAttrGroup." ++ ::= { bgpMIBGroups 3 } ++ ++ bgp4MIBPathAttrGroup OBJECT-GROUP ++ OBJECTS { bgp4PathAttrPeer, ++ bgp4PathAttrIpAddrPrefixLen, ++ bgp4PathAttrIpAddrPrefix, ++ bgp4PathAttrOrigin, ++ bgp4PathAttrASPathSegment, ++ bgp4PathAttrNextHop, ++ bgp4PathAttrMultiExitDisc, ++ bgp4PathAttrLocalPref, ++ bgp4PathAttrAtomicAggregate, ++ bgp4PathAttrAggregatorAS, ++ bgp4PathAttrAggregatorAddr, ++ bgp4PathAttrCalcLocalPref, ++ bgp4PathAttrBest, ++ bgp4PathAttrUnknown } ++ STATUS current ++ DESCRIPTION ++ "A collection of objects for managing ++ BGP path entries." ++ ::= { bgpMIBGroups 4 } ++ ++ bgp4MIBNotificationGroup NOTIFICATION-GROUP ++ NOTIFICATIONS { bgpEstablished, ++ bgpBackwardTransition } ++ STATUS current ++ DESCRIPTION ++ "A collection of notifications for signaling ++ changes in BGP peer relationships." ++ ::= { bgpMIBGroups 5 } ++ ++ END +diff -ruN net-snmp-5.1.2-orig/mibs/BRIDGE-MIB.txt net-snmp-5.1.2-5/mibs/BRIDGE-MIB.txt +--- net-snmp-5.1.2-orig/mibs/BRIDGE-MIB.txt 1970-01-01 01:00:00.000000000 +0100 ++++ net-snmp-5.1.2-5/mibs/BRIDGE-MIB.txt 2005-03-13 16:17:21.000000000 +0100 +@@ -0,0 +1,1075 @@ ++BRIDGE-MIB DEFINITIONS ::= BEGIN ++ ++IMPORTS ++ Counter, TimeTicks ++ FROM RFC1155-SMI ++ mib-2 ++ FROM RFC1213-MIB ++ OBJECT-TYPE ++ FROM RFC-1212 ++ TRAP-TYPE ++ FROM RFC-1215; ++ ++-- All representations of MAC addresses in this MIB Module ++-- use, as a textual convention (i.e. this convention does ++-- not affect their encoding), the data type: ++MacAddress ::= OCTET STRING (SIZE (6)) -- a 6 octet address ++ -- in the ++ -- "canonical" ++ -- order ++-- defined by IEEE 802.1a, i.e., as if it were transmitted ++-- least significant bit first, even though 802.5 (in ++-- contrast to other n802.x protocols) requires MAC ++-- addresses to be transmitted most significant bit first. ++-- ++-- 16-bit addresses, if needed, are represented by setting ++-- their upper 4 octets to all 0's, i.e., AAFF would be ++-- represented as 00000000AAFF. ++ ++-- Similarly, all representations of Bridge-Id in this MIB ++-- Module use, as a textual convention (i.e. this ++-- convention does not affect their encoding), the data ++-- type: ++BridgeId ::= OCTET STRING (SIZE (8)) -- the ++ -- Bridge-Identifier ++ -- as used in the ++ -- Spanning Tree ++-- Protocol to uniquely identify a bridge. Its first two ++-- octets (in network byte order) contain a priority ++-- value and its last 6 octets contain the MAC address ++-- used to refer to a bridge in a unique fashion ++-- (typically, the numerically smallest MAC address ++-- of all ports on the bridge). ++ ++-- Several objects in this MIB module represent values of ++-- timers used by the Spanning Tree Protocol. In this ++-- MIB, these timers have values in units of hundreths of ++-- a second (i.e. 1/100 secs). ++-- These timers, when stored in a Spanning Tree Protocol's ++-- BPDU, are in units of 1/256 seconds. Note, however, ++-- that 802.1D-1990 specifies a settable granularity of ++-- no more than 1 second for these timers. To avoid ++-- ambiguity, a data type is defined here as a textual ++-- convention and all representation of these timers ++-- in this MIB module are defined using this data type. An ++-- algorithm is also defined for converting between the ++-- different units, to ensure a timer's value is not ++-- distorted by multiple conversions. ++-- The data type is: ++ ++Timeout ::= INTEGER -- a STP timer in units of 1/100 seconds ++ ++-- To convert a Timeout value into a value in units of ++-- 1/256 seconds, the following algorithm should be used: ++-- ++-- b = floor( (n * 256) / 100) ++-- ++-- where: ++-- floor = quotient [ignore remainder] ++-- n is the value in 1/100 second units ++-- b is the value in 1/256 second units ++-- ++-- To convert the value from 1/256 second units back to ++-- 1/100 seconds, the following algorithm should be used: ++-- ++-- n = ceiling( (b * 100) / 256) ++-- ++-- where: ++-- ceiling = quotient [if remainder is 0], or ++-- quotient + 1 [if remainder is non-zero] ++-- n is the value in 1/100 second units ++-- b is the value in 1/256 second units ++-- ++-- Note: it is important that the arithmetic operations are ++-- done in the order specified (i.e., multiply first, divide ++-- second). ++ ++ dot1dBridge OBJECT IDENTIFIER ::= { mib-2 17 } ++ ++-- groups in the Bridge MIB ++ ++dot1dBase OBJECT IDENTIFIER ::= { dot1dBridge 1 } ++ ++dot1dStp OBJECT IDENTIFIER ::= { dot1dBridge 2 } ++ ++dot1dSr OBJECT IDENTIFIER ::= { dot1dBridge 3 } ++-- separately documented ++ ++dot1dTp OBJECT IDENTIFIER ::= { dot1dBridge 4 } ++ ++dot1dStatic OBJECT IDENTIFIER ::= { dot1dBridge 5 } ++ ++-- the dot1dBase group ++ ++-- Implementation of the dot1dBase group is mandatory for all ++-- bridges. ++ ++dot1dBaseBridgeAddress OBJECT-TYPE ++ SYNTAX MacAddress ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "The MAC address used by this bridge when it must ++ be referred to in a unique fashion. It is ++ recommended that this be the numerically smallest ++ MAC address of all ports that belong to this ++ bridge. However it is only required to be unique. ++ When concatenated with dot1dStpPriority a unique ++ BridgeIdentifier is formed which is used in the ++ Spanning Tree Protocol." ++ REFERENCE ++ "IEEE 802.1D-1990: Sections 6.4.1.1.3 and 3.12.5" ++ ::= { dot1dBase 1 } ++ ++dot1dBaseNumPorts OBJECT-TYPE ++ SYNTAX INTEGER ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "The number of ports controlled by this bridging ++ entity." ++ REFERENCE ++ "IEEE 802.1D-1990: Section 6.4.1.1.3" ++ ::= { dot1dBase 2 } ++ ++dot1dBaseType OBJECT-TYPE ++ SYNTAX INTEGER { ++ unknown(1), ++ transparent-only(2), ++ sourceroute-only(3), ++ srt(4) ++ } ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "Indicates what type of bridging this bridge can ++ perform. If a bridge is actually performing a ++ certain type of bridging this will be indicated by ++ entries in the port table for the given type." ++ ::= { dot1dBase 3 } ++ ++-- The Generic Bridge Port Table ++ ++dot1dBasePortTable OBJECT-TYPE ++ SYNTAX SEQUENCE OF Dot1dBasePortEntry ++ ACCESS not-accessible ++ STATUS mandatory ++ DESCRIPTION ++ "A table that contains generic information about ++ every port that is associated with this bridge. ++ Transparent, source-route, and srt ports are ++ included." ++ ::= { dot1dBase 4 } ++ ++dot1dBasePortEntry OBJECT-TYPE ++ SYNTAX Dot1dBasePortEntry ++ ACCESS not-accessible ++ STATUS mandatory ++ DESCRIPTION ++ "A list of information for each port of the ++ bridge." ++ REFERENCE ++ "IEEE 802.1D-1990: Section 6.4.2, 6.6.1" ++ INDEX { dot1dBasePort } ++ ::= { dot1dBasePortTable 1 } ++ ++Dot1dBasePortEntry ::= ++ SEQUENCE { ++ dot1dBasePort ++ INTEGER, ++ dot1dBasePortIfIndex ++ INTEGER, ++ dot1dBasePortCircuit ++ ++ OBJECT IDENTIFIER, ++ dot1dBasePortDelayExceededDiscards ++ Counter, ++ dot1dBasePortMtuExceededDiscards ++ Counter ++ } ++ ++dot1dBasePort OBJECT-TYPE ++ SYNTAX INTEGER (1..65535) ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "The port number of the port for which this entry ++ contains bridge management information." ++ ::= { dot1dBasePortEntry 1 } ++ ++dot1dBasePortIfIndex OBJECT-TYPE ++ SYNTAX INTEGER ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "The value of the instance of the ifIndex object, ++ defined in MIB-II, for the interface corresponding ++ to this port." ++ ::= { dot1dBasePortEntry 2 } ++ ++dot1dBasePortCircuit OBJECT-TYPE ++ SYNTAX OBJECT IDENTIFIER ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "For a port which (potentially) has the same value ++ of dot1dBasePortIfIndex as another port on the ++ same bridge, this object contains the name of an ++ object instance unique to this port. For example, ++ in the case where multiple ports correspond one- ++ to-one with multiple X.25 virtual circuits, this ++ value might identify an (e.g., the first) object ++ instance associated with the X.25 virtual circuit ++ corresponding to this port. ++ ++ For a port which has a unique value of ++ dot1dBasePortIfIndex, this object can have the ++ value { 0 0 }." ++ ::= { dot1dBasePortEntry 3 } ++ ++dot1dBasePortDelayExceededDiscards OBJECT-TYPE ++ SYNTAX Counter ++ ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "The number of frames discarded by this port due ++ to excessive transit delay through the bridge. It ++ is incremented by both transparent and source ++ route bridges." ++ REFERENCE ++ "IEEE 802.1D-1990: Section 6.6.1.1.3" ++ ::= { dot1dBasePortEntry 4 } ++ ++dot1dBasePortMtuExceededDiscards OBJECT-TYPE ++ SYNTAX Counter ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "The number of frames discarded by this port due ++ to an excessive size. It is incremented by both ++ transparent and source route bridges." ++ REFERENCE ++ "IEEE 802.1D-1990: Section 6.6.1.1.3" ++ ::= { dot1dBasePortEntry 5 } ++ ++-- the dot1dStp group ++ ++-- Implementation of the dot1dStp group is optional. It is ++-- implemented by those bridges that support the Spanning Tree ++-- Protocol. ++ ++dot1dStpProtocolSpecification OBJECT-TYPE ++ SYNTAX INTEGER { ++ unknown(1), ++ decLb100(2), ++ ieee8021d(3) ++ } ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "An indication of what version of the Spanning ++ Tree Protocol is being run. The value ++ 'decLb100(2)' indicates the DEC LANbridge 100 ++ Spanning Tree protocol. IEEE 802.1d ++ implementations will return 'ieee8021d(3)'. If ++ future versions of the IEEE Spanning Tree Protocol ++ are released that are incompatible with the ++ current version a new value will be defined." ++ ++ ::= { dot1dStp 1 } ++ ++dot1dStpPriority OBJECT-TYPE ++ SYNTAX INTEGER (0..65535) ++ ACCESS read-write ++ STATUS mandatory ++ DESCRIPTION ++ "The value of the write-able portion of the Bridge ++ ID, i.e., the first two octets of the (8 octet ++ long) Bridge ID. The other (last) 6 octets of the ++ Bridge ID are given by the value of ++ dot1dBaseBridgeAddress." ++ REFERENCE ++ "IEEE 802.1D-1990: Section 4.5.3.7" ++ ::= { dot1dStp 2 } ++ ++dot1dStpTimeSinceTopologyChange OBJECT-TYPE ++ SYNTAX TimeTicks ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "The time (in hundredths of a second) since the ++ last time a topology change was detected by the ++ bridge entity." ++ REFERENCE ++ "IEEE 802.1D-1990: Section 6.8.1.1.3" ++ ::= { dot1dStp 3 } ++ ++dot1dStpTopChanges OBJECT-TYPE ++ SYNTAX Counter ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "The total number of topology changes detected by ++ this bridge since the management entity was last ++ reset or initialized." ++ REFERENCE ++ "IEEE 802.1D-1990: Section 6.8.1.1.3" ++ ::= { dot1dStp 4 } ++ ++dot1dStpDesignatedRoot OBJECT-TYPE ++ SYNTAX BridgeId ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "The bridge identifier of the root of the spanning ++ tree as determined by the Spanning Tree Protocol ++ as executed by this node. This value is used as ++ ++ the Root Identifier parameter in all Configuration ++ Bridge PDUs originated by this node." ++ REFERENCE ++ "IEEE 802.1D-1990: Section 4.5.3.1" ++ ::= { dot1dStp 5 } ++ ++dot1dStpRootCost OBJECT-TYPE ++ SYNTAX INTEGER ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "The cost of the path to the root as seen from ++ this bridge." ++ REFERENCE ++ "IEEE 802.1D-1990: Section 4.5.3.2" ++ ::= { dot1dStp 6 } ++ ++dot1dStpRootPort OBJECT-TYPE ++ SYNTAX INTEGER ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "The port number of the port which offers the ++ lowest cost path from this bridge to the root ++ bridge." ++ REFERENCE ++ "IEEE 802.1D-1990: Section 4.5.3.3" ++ ::= { dot1dStp 7 } ++ ++dot1dStpMaxAge OBJECT-TYPE ++ SYNTAX Timeout ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "The maximum age of Spanning Tree Protocol ++ information learned from the network on any port ++ before it is discarded, in units of hundredths of ++ a second. This is the actual value that this ++ bridge is currently using." ++ REFERENCE ++ "IEEE 802.1D-1990: Section 4.5.3.4" ++ ::= { dot1dStp 8 } ++ ++dot1dStpHelloTime OBJECT-TYPE ++ SYNTAX Timeout ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ ++ "The amount of time between the transmission of ++ Configuration bridge PDUs by this node on any port ++ when it is the root of the spanning tree or trying ++ to become so, in units of hundredths of a second. ++ This is the actual value that this bridge is ++ currently using." ++ REFERENCE ++ "IEEE 802.1D-1990: Section 4.5.3.5" ++ ::= { dot1dStp 9 } ++ ++dot1dStpHoldTime OBJECT-TYPE ++ SYNTAX INTEGER ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "This time value determines the interval length ++ during which no more than two Configuration bridge ++ PDUs shall be transmitted by this node, in units ++ of hundredths of a second." ++ REFERENCE ++ "IEEE 802.1D-1990: Section 4.5.3.14" ++ ::= { dot1dStp 10 } ++ ++dot1dStpForwardDelay OBJECT-TYPE ++ SYNTAX Timeout ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "This time value, measured in units of hundredths ++ of a second, controls how fast a port changes its ++ spanning state when moving towards the Forwarding ++ state. The value determines how long the port ++ stays in each of the Listening and Learning ++ states, which precede the Forwarding state. This ++ value is also used, when a topology change has ++ been detected and is underway, to age all dynamic ++ entries in the Forwarding Database. [Note that ++ this value is the one that this bridge is ++ currently using, in contrast to ++ dot1dStpBridgeForwardDelay which is the value that ++ this bridge and all others would start using ++ if/when this bridge were to become the root.]" ++ REFERENCE ++ "IEEE 802.1D-1990: Section 4.5.3.6" ++ ::= { dot1dStp 11 } ++ ++dot1dStpBridgeMaxAge OBJECT-TYPE ++ SYNTAX Timeout (600..4000) ++ ++ ACCESS read-write ++ STATUS mandatory ++ DESCRIPTION ++ "The value that all bridges use for MaxAge when ++ this bridge is acting as the root. Note that ++ 802.1D-1990 specifies that the range for this ++ parameter is related to the value of ++ dot1dStpBridgeHelloTime. The granularity of this ++ timer is specified by 802.1D-1990 to be 1 second. ++ An agent may return a badValue error if a set is ++ attempted to a value which is not a whole number ++ of seconds." ++ REFERENCE ++ "IEEE 802.1D-1990: Section 4.5.3.8" ++ ::= { dot1dStp 12 } ++ ++dot1dStpBridgeHelloTime OBJECT-TYPE ++ SYNTAX Timeout (100..1000) ++ ACCESS read-write ++ STATUS mandatory ++ DESCRIPTION ++ "The value that all bridges use for HelloTime when ++ this bridge is acting as the root. The ++ granularity of this timer is specified by 802.1D- ++ 1990 to be 1 second. An agent may return a ++ badValue error if a set is attempted to a value ++ which is not a whole number of seconds." ++ REFERENCE ++ "IEEE 802.1D-1990: Section 4.5.3.9" ++ ::= { dot1dStp 13 } ++ ++dot1dStpBridgeForwardDelay OBJECT-TYPE ++ SYNTAX Timeout (400..3000) ++ ACCESS read-write ++ STATUS mandatory ++ DESCRIPTION ++ "The value that all bridges use for ForwardDelay ++ when this bridge is acting as the root. Note that ++ 802.1D-1990 specifies that the range for this ++ parameter is related to the value of ++ dot1dStpBridgeMaxAge. The granularity of this ++ timer is specified by 802.1D-1990 to be 1 second. ++ An agent may return a badValue error if a set is ++ attempted to a value which is not a whole number ++ of seconds." ++ REFERENCE ++ "IEEE 802.1D-1990: Section 4.5.3.10" ++ ::= { dot1dStp 14 } ++ ++-- The Spanning Tree Port Table ++ ++dot1dStpPortTable OBJECT-TYPE ++ SYNTAX SEQUENCE OF Dot1dStpPortEntry ++ ACCESS not-accessible ++ STATUS mandatory ++ DESCRIPTION ++ "A table that contains port-specific information ++ for the Spanning Tree Protocol." ++ ::= { dot1dStp 15 } ++ ++dot1dStpPortEntry OBJECT-TYPE ++ SYNTAX Dot1dStpPortEntry ++ ACCESS not-accessible ++ STATUS mandatory ++ DESCRIPTION ++ "A list of information maintained by every port ++ about the Spanning Tree Protocol state for that ++ port." ++ INDEX { dot1dStpPort } ++ ::= { dot1dStpPortTable 1 } ++ ++Dot1dStpPortEntry ::= ++ SEQUENCE { ++ dot1dStpPort ++ INTEGER, ++ dot1dStpPortPriority ++ INTEGER, ++ dot1dStpPortState ++ INTEGER, ++ dot1dStpPortEnable ++ INTEGER, ++ dot1dStpPortPathCost ++ INTEGER, ++ dot1dStpPortDesignatedRoot ++ BridgeId, ++ dot1dStpPortDesignatedCost ++ INTEGER, ++ dot1dStpPortDesignatedBridge ++ BridgeId, ++ dot1dStpPortDesignatedPort ++ OCTET STRING, ++ dot1dStpPortForwardTransitions ++ Counter ++ } ++ ++dot1dStpPort OBJECT-TYPE ++ SYNTAX INTEGER (1..65535) ++ ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "The port number of the port for which this entry ++ contains Spanning Tree Protocol management ++ information." ++ REFERENCE ++ "IEEE 802.1D-1990: Section 6.8.2.1.2" ++ ::= { dot1dStpPortEntry 1 } ++ ++dot1dStpPortPriority OBJECT-TYPE ++ SYNTAX INTEGER (0..255) ++ ACCESS read-write ++ STATUS mandatory ++ DESCRIPTION ++ "The value of the priority field which is ++ contained in the first (in network byte order) ++ octet of the (2 octet long) Port ID. The other ++ octet of the Port ID is given by the value of ++ dot1dStpPort." ++ REFERENCE ++ "IEEE 802.1D-1990: Section 4.5.5.1" ++ ::= { dot1dStpPortEntry 2 } ++ ++dot1dStpPortState OBJECT-TYPE ++ SYNTAX INTEGER { ++ disabled(1), ++ blocking(2), ++ listening(3), ++ learning(4), ++ forwarding(5), ++ broken(6) ++ } ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "The port's current state as defined by ++ application of the Spanning Tree Protocol. This ++ state controls what action a port takes on ++ reception of a frame. If the bridge has detected ++ a port that is malfunctioning it will place that ++ port into the broken(6) state. For ports which ++ are disabled (see dot1dStpPortEnable), this object ++ will have a value of disabled(1)." ++ REFERENCE ++ "IEEE 802.1D-1990: Section 4.5.5.2" ++ ::= { dot1dStpPortEntry 3 } ++ ++dot1dStpPortEnable OBJECT-TYPE ++ SYNTAX INTEGER { ++ enabled(1), ++ disabled(2) ++ } ++ ACCESS read-write ++ STATUS mandatory ++ DESCRIPTION ++ "The enabled/disabled status of the port." ++ REFERENCE ++ "IEEE 802.1D-1990: Section 4.5.5.2" ++ ::= { dot1dStpPortEntry 4 } ++ ++dot1dStpPortPathCost OBJECT-TYPE ++ SYNTAX INTEGER (1..65535) ++ ACCESS read-write ++ STATUS mandatory ++ DESCRIPTION ++ "The contribution of this port to the path cost of ++ paths towards the spanning tree root which include ++ this port. 802.1D-1990 recommends that the ++ default value of this parameter be in inverse ++ proportion to the speed of the attached LAN." ++ REFERENCE ++ "IEEE 802.1D-1990: Section 4.5.5.3" ++ ::= { dot1dStpPortEntry 5 } ++ ++dot1dStpPortDesignatedRoot OBJECT-TYPE ++ SYNTAX BridgeId ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "The unique Bridge Identifier of the Bridge ++ recorded as the Root in the Configuration BPDUs ++ transmitted by the Designated Bridge for the ++ segment to which the port is attached." ++ REFERENCE ++ "IEEE 802.1D-1990: Section 4.5.5.4" ++ ::= { dot1dStpPortEntry 6 } ++ ++dot1dStpPortDesignatedCost OBJECT-TYPE ++ SYNTAX INTEGER ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "The path cost of the Designated Port of the ++ segment connected to this port. This value is ++ compared to the Root Path Cost field in received ++ ++ bridge PDUs." ++ REFERENCE ++ "IEEE 802.1D-1990: Section 4.5.5.5" ++ ::= { dot1dStpPortEntry 7 } ++ ++dot1dStpPortDesignatedBridge OBJECT-TYPE ++ SYNTAX BridgeId ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "The Bridge Identifier of the bridge which this ++ port considers to be the Designated Bridge for ++ this port's segment." ++ REFERENCE ++ "IEEE 802.1D-1990: Section 4.5.5.6" ++ ::= { dot1dStpPortEntry 8 } ++ ++dot1dStpPortDesignatedPort OBJECT-TYPE ++ SYNTAX OCTET STRING (SIZE (2)) ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "The Port Identifier of the port on the Designated ++ Bridge for this port's segment." ++ REFERENCE ++ "IEEE 802.1D-1990: Section 4.5.5.7" ++ ::= { dot1dStpPortEntry 9 } ++ ++dot1dStpPortForwardTransitions OBJECT-TYPE ++ SYNTAX Counter ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "The number of times this port has transitioned ++ from the Learning state to the Forwarding state." ++ ::= { dot1dStpPortEntry 10 } ++ ++-- the dot1dTp group ++ ++-- Implementation of the dot1dTp group is optional. It is ++-- implemented by those bridges that support the transparent ++-- bridging mode. A transparent or SRT bridge will implement ++-- this group. ++ ++dot1dTpLearnedEntryDiscards OBJECT-TYPE ++ SYNTAX Counter ++ ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "The total number of Forwarding Database entries, ++ which have been or would have been learnt, but ++ have been discarded due to a lack of space to ++ store them in the Forwarding Database. If this ++ counter is increasing, it indicates that the ++ Forwarding Database is regularly becoming full (a ++ condition which has unpleasant performance effects ++ on the subnetwork). If this counter has a ++ significant value but is not presently increasing, ++ it indicates that the problem has been occurring ++ but is not persistent." ++ REFERENCE ++ "IEEE 802.1D-1990: Section 6.7.1.1.3" ++ ::= { dot1dTp 1 } ++ ++dot1dTpAgingTime OBJECT-TYPE ++ SYNTAX INTEGER (10..1000000) ++ ACCESS read-write ++ STATUS mandatory ++ DESCRIPTION ++ "The timeout period in seconds for aging out ++ dynamically learned forwarding information. ++ 802.1D-1990 recommends a default of 300 seconds." ++ REFERENCE ++ "IEEE 802.1D-1990: Section 6.7.1.1.3" ++ ::= { dot1dTp 2 } ++ ++-- The Forwarding Database for Transparent Bridges ++ ++dot1dTpFdbTable OBJECT-TYPE ++ SYNTAX SEQUENCE OF Dot1dTpFdbEntry ++ ACCESS not-accessible ++ STATUS mandatory ++ DESCRIPTION ++ "A table that contains information about unicast ++ entries for which the bridge has forwarding and/or ++ filtering information. This information is used ++ by the transparent bridging function in ++ determining how to propagate a received frame." ++ ::= { dot1dTp 3 } ++ ++dot1dTpFdbEntry OBJECT-TYPE ++ SYNTAX Dot1dTpFdbEntry ++ ACCESS not-accessible ++ STATUS mandatory ++ DESCRIPTION ++ "Information about a specific unicast MAC address ++ for which the bridge has some forwarding and/or ++ filtering information." ++ INDEX { dot1dTpFdbAddress } ++ ::= { dot1dTpFdbTable 1 } ++ ++Dot1dTpFdbEntry ::= ++ SEQUENCE { ++ dot1dTpFdbAddress ++ MacAddress, ++ dot1dTpFdbPort ++ INTEGER, ++ dot1dTpFdbStatus ++ INTEGER ++ } ++ ++dot1dTpFdbAddress OBJECT-TYPE ++ SYNTAX MacAddress ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "A unicast MAC address for which the bridge has ++ forwarding and/or filtering information." ++ REFERENCE ++ "IEEE 802.1D-1990: Section 3.9.1, 3.9.2" ++ ::= { dot1dTpFdbEntry 1 } ++ ++dot1dTpFdbPort OBJECT-TYPE ++ SYNTAX INTEGER ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "Either the value '0', or the port number of the ++ port on which a frame having a source address ++ equal to the value of the corresponding instance ++ of dot1dTpFdbAddress has been seen. A value of ++ '0' indicates that the port number has not been ++ learned but that the bridge does have some ++ forwarding/filtering information about this ++ address (e.g. in the dot1dStaticTable). ++ Implementors are encouraged to assign the port ++ value to this object whenever it is learned even ++ for addresses for which the corresponding value of ++ dot1dTpFdbStatus is not learned(3)." ++ ::= { dot1dTpFdbEntry 2 } ++ ++dot1dTpFdbStatus OBJECT-TYPE ++ SYNTAX INTEGER { ++ other(1), ++ invalid(2), ++ learned(3), ++ self(4), ++ mgmt(5) ++ } ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "The status of this entry. The meanings of the ++ values are: ++ other(1) : none of the following. This would ++ include the case where some other ++ MIB object (not the corresponding ++ instance of dot1dTpFdbPort, nor an ++ entry in the dot1dStaticTable) is ++ being used to determine if and how ++ frames addressed to the value of ++ the corresponding instance of ++ dot1dTpFdbAddress are being ++ forwarded. ++ invalid(2) : this entry is not longer valid ++ (e.g., it was learned but has since ++ aged-out), but has not yet been ++ flushed from the table. ++ learned(3) : the value of the corresponding ++ instance of dot1dTpFdbPort was ++ learned, and is being used. ++ self(4) : the value of the corresponding ++ instance of dot1dTpFdbAddress ++ represents one of the bridge's ++ addresses. The corresponding ++ instance of dot1dTpFdbPort ++ indicates which of the bridge's ++ ports has this address. ++ mgmt(5) : the value of the corresponding ++ instance of dot1dTpFdbAddress is ++ also the value of an existing ++ instance of dot1dStaticAddress." ++ ::= { dot1dTpFdbEntry 3 } ++ ++-- Port Table for Transparent Bridges ++ ++dot1dTpPortTable OBJECT-TYPE ++ SYNTAX SEQUENCE OF Dot1dTpPortEntry ++ ACCESS not-accessible ++ STATUS mandatory ++ DESCRIPTION ++ "A table that contains information about every ++ port that is associated with this transparent ++ bridge." ++ ::= { dot1dTp 4 } ++ ++dot1dTpPortEntry OBJECT-TYPE ++ SYNTAX Dot1dTpPortEntry ++ ACCESS not-accessible ++ STATUS mandatory ++ DESCRIPTION ++ "A list of information for each port of a ++ transparent bridge." ++ INDEX { dot1dTpPort } ++ ::= { dot1dTpPortTable 1 } ++ ++Dot1dTpPortEntry ::= ++ SEQUENCE { ++ dot1dTpPort ++ INTEGER, ++ dot1dTpPortMaxInfo ++ INTEGER, ++ dot1dTpPortInFrames ++ Counter, ++ dot1dTpPortOutFrames ++ Counter, ++ dot1dTpPortInDiscards ++ Counter ++ } ++ ++dot1dTpPort OBJECT-TYPE ++ SYNTAX INTEGER (1..65535) ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "The port number of the port for which this entry ++ contains Transparent bridging management ++ information." ++ ::= { dot1dTpPortEntry 1 } ++ ++-- It would be nice if we could use ifMtu as the size of the ++-- largest INFO field, but we can't because ifMtu is defined ++-- to be the size that the (inter-)network layer can use which ++-- can differ from the MAC layer (especially if several layers ++-- of encapsulation are used). ++ ++dot1dTpPortMaxInfo OBJECT-TYPE ++ SYNTAX INTEGER ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "The maximum size of the INFO (non-MAC) field that ++ this port will receive or transmit." ++ ::= { dot1dTpPortEntry 2 } ++ ++dot1dTpPortInFrames OBJECT-TYPE ++ SYNTAX Counter ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "The number of frames that have been received by ++ this port from its segment. Note that a frame ++ received on the interface corresponding to this ++ port is only counted by this object if and only if ++ it is for a protocol being processed by the local ++ bridging function, including bridge management ++ frames." ++ REFERENCE ++ "IEEE 802.1D-1990: Section 6.6.1.1.3" ++ ::= { dot1dTpPortEntry 3 } ++ ++dot1dTpPortOutFrames OBJECT-TYPE ++ SYNTAX Counter ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "The number of frames that have been transmitted ++ by this port to its segment. Note that a frame ++ transmitted on the interface corresponding to this ++ port is only counted by this object if and only if ++ it is for a protocol being processed by the local ++ bridging function, including bridge management ++ frames." ++ REFERENCE ++ "IEEE 802.1D-1990: Section 6.6.1.1.3" ++ ::= { dot1dTpPortEntry 4 } ++ ++dot1dTpPortInDiscards OBJECT-TYPE ++ SYNTAX Counter ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "Count of valid frames received which were ++ discarded (i.e., filtered) by the Forwarding ++ Process." ++ REFERENCE ++ "IEEE 802.1D-1990: Section 6.6.1.1.3" ++ ::= { dot1dTpPortEntry 5 } ++-- The Static (Destination-Address Filtering) Database ++ ++-- Implementation of this group is optional. ++ ++dot1dStaticTable OBJECT-TYPE ++ SYNTAX SEQUENCE OF Dot1dStaticEntry ++ ACCESS not-accessible ++ STATUS mandatory ++ DESCRIPTION ++ "A table containing filtering information ++ configured into the bridge by (local or network) ++ management specifying the set of ports to which ++ frames received from specific ports and containing ++ specific destination addresses are allowed to be ++ forwarded. The value of zero in this table as the ++ port number from which frames with a specific ++ destination address are received, is used to ++ specify all ports for which there is no specific ++ entry in this table for that particular ++ destination address. Entries are valid for ++ unicast and for group/broadcast addresses." ++ REFERENCE ++ "IEEE 802.1D-1990: Section 6.7.2" ++ ::= { dot1dStatic 1 } ++ ++dot1dStaticEntry OBJECT-TYPE ++ SYNTAX Dot1dStaticEntry ++ ACCESS not-accessible ++ STATUS mandatory ++ DESCRIPTION ++ "Filtering information configured into the bridge ++ by (local or network) management specifying the ++ set of ports to which frames received from a ++ specific port and containing a specific ++ destination address are allowed to be forwarded." ++ REFERENCE ++ "IEEE 802.1D-1990: Section 6.7.2" ++ INDEX { dot1dStaticAddress, dot1dStaticReceivePort } ++ ::= { dot1dStaticTable 1 } ++ ++Dot1dStaticEntry ::= ++ SEQUENCE { ++ dot1dStaticAddress ++ MacAddress, ++ dot1dStaticReceivePort ++ INTEGER, ++ dot1dStaticAllowedToGoTo ++ OCTET STRING, ++ dot1dStaticStatus ++ INTEGER ++ } ++ ++dot1dStaticAddress OBJECT-TYPE ++ SYNTAX MacAddress ++ ACCESS read-write ++ STATUS mandatory ++ DESCRIPTION ++ "The destination MAC address in a frame to which ++ this entry's filtering information applies. This ++ object can take the value of a unicast address, a ++ group address or the broadcast address." ++ REFERENCE ++ "IEEE 802.1D-1990: Section 3.9.1, 3.9.2" ++ ::= { dot1dStaticEntry 1 } ++ ++dot1dStaticReceivePort OBJECT-TYPE ++ SYNTAX INTEGER ++ ACCESS read-write ++ STATUS mandatory ++ DESCRIPTION ++ "Either the value '0', or the port number of the ++ port from which a frame must be received in order ++ for this entry's filtering information to apply. ++ A value of zero indicates that this entry applies ++ on all ports of the bridge for which there is no ++ other applicable entry." ++ ::= { dot1dStaticEntry 2 } ++ ++dot1dStaticAllowedToGoTo OBJECT-TYPE ++ SYNTAX OCTET STRING ++ ACCESS read-write ++ STATUS mandatory ++ DESCRIPTION ++ "The set of ports to which frames received from a ++ specific port and destined for a specific MAC ++ ++ address, are allowed to be forwarded. Each octet ++ within the value of this object specifies a set of ++ eight ports, with the first octet specifying ports ++ 1 through 8, the second octet specifying ports 9 ++ through 16, etc. Within each octet, the most ++ significant bit represents the lowest numbered ++ port, and the least significant bit represents the ++ highest numbered port. Thus, each port of the ++ bridge is represented by a single bit within the ++ value of this object. If that bit has a value of ++ '1' then that port is included in the set of ++ ports; the port is not included if its bit has a ++ value of '0'. (Note that the setting of the bit ++ corresponding to the port from which a frame is ++ received is irrelevant.) The default value of ++ this object is a string of ones of appropriate ++ length." ++ ::= { dot1dStaticEntry 3 } ++ ++dot1dStaticStatus OBJECT-TYPE ++ SYNTAX INTEGER { ++ other(1), ++ invalid(2), ++ permanent(3), ++ deleteOnReset(4), ++ deleteOnTimeout(5) ++ } ++ ACCESS read-write ++ STATUS mandatory ++ DESCRIPTION ++ "This object indicates the status of this entry. ++ The default value is permanent(3). ++ other(1) - this entry is currently in use but ++ the conditions under which it will ++ remain so are different from each of the ++ following values. ++ invalid(2) - writing this value to the object ++ removes the corresponding entry. ++ permanent(3) - this entry is currently in use ++ and will remain so after the next reset ++ of the bridge. ++ deleteOnReset(4) - this entry is currently in ++ use and will remain so until the next ++ reset of the bridge. ++ deleteOnTimeout(5) - this entry is currently ++ in use and will remain so until it is ++ aged out." ++ ++ ::= { dot1dStaticEntry 4 } ++ ++-- Traps for use by Bridges ++ ++-- Traps for the Spanning Tree Protocol ++ ++newRoot TRAP-TYPE ++ ENTERPRISE dot1dBridge ++ DESCRIPTION ++ "The newRoot trap indicates that the sending agent ++ has become the new root of the Spanning Tree; the ++ trap is sent by a bridge soon after its election ++ as the new root, e.g., upon expiration of the ++ Topology Change Timer immediately subsequent to ++ its election. Implementation of this trap is ++ optional." ++ ::= 1 ++ ++topologyChange TRAP-TYPE ++ ENTERPRISE dot1dBridge ++ DESCRIPTION ++ "A topologyChange trap is sent by a bridge when ++ any of its configured ports transitions from the ++ Learning state to the Forwarding state, or from ++ the Forwarding state to the Blocking state. The ++ trap is not sent if a newRoot trap is sent for the ++ same transition. Implementation of this trap is ++ optional." ++ ::= 2 ++ ++END +diff -ruN net-snmp-5.1.2-orig/mibs/GNOME-SMI.txt net-snmp-5.1.2-5/mibs/GNOME-SMI.txt +--- net-snmp-5.1.2-orig/mibs/GNOME-SMI.txt 1970-01-01 01:00:00.000000000 +0100 ++++ net-snmp-5.1.2-5/mibs/GNOME-SMI.txt 2005-03-13 16:17:21.000000000 +0100 +@@ -0,0 +1,72 @@ ++GNOME-SMI DEFINITIONS ::= BEGIN ++ ++IMPORTS ++ MODULE-IDENTITY, ++ OBJECT-IDENTITY, ++ enterprises ++ FROM SNMPv2-SMI; ++ ++gnome MODULE-IDENTITY ++ LAST-UPDATED "200312070000Z" ++ ORGANIZATION "GNOME project" ++ CONTACT-INFO ++ "GNU Network Object Model Environment project ++ ++ see http://www.gnome.org for contact persons of a particular ++ area or subproject of GNOME. ++ ++ Administrative contact for MIB module: ++ ++ Jochen Friedrich ++ Buedingerstr. 30b ++ 63546 Hammersbach ++ Germany ++ ++ email: jochen@scram.de" ++ DESCRIPTION ++ "The Structure of GNOME." ++ ++ -- revision history ++ ++ REVISION "9809010000Z" -- September 01, 1998 ++ DESCRIPTION ++ "Initial version." ++ ++ REVISION "200312070000Z" -- December 07, 2003 ++ DESCRIPTION ++ "Added gnomeSysadmin subtree for GNOME project system administration. ++ Updated contact info." ++ ++ ::= { enterprises 3317 } -- assigned by IANA ++ ++gnomeProducts OBJECT-IDENTITY ++ STATUS current ++ DESCRIPTION ++ "gnomeProducts is the root OBJECT IDENTIFIER from ++ which sysObjectID values are assigned." ++ ::= { gnome 1 } ++ ++gnomeMgmt OBJECT-IDENTITY ++ STATUS current ++ DESCRIPTION ++ "gnomeMgmt defines the subtree for production GNOME related ++ MIB registrations." ++ ::= { gnome 2 } ++ ++gnomeTest OBJECT-IDENTITY ++ STATUS current ++ DESCRIPTION ++ "gnomeTest defines the subtree for testing GNOME related ++ MIB registrations." ++ ::= { gnome 3 } ++ ++gnomeSysadmin OBJECT-IDENTITY ++ STATUS current ++ DESCRIPTION ++ "gnomeSysadmin defines the subtree for GNOME related Sysadmin ++ MIB registrations." ++ ::= { gnome 4 } ++ ++-- more to come if necessary. ++ ++END +diff -ruN net-snmp-5.1.2-orig/mibs/Makefile.in net-snmp-5.1.2-5/mibs/Makefile.in +--- net-snmp-5.1.2-orig/mibs/Makefile.in 2004-06-18 20:11:15.000000000 +0200 ++++ net-snmp-5.1.2-5/mibs/Makefile.in 2005-03-13 16:17:21.000000000 +0100 +@@ -43,11 +43,15 @@ + UCDMIBS = UCD-SNMP-MIB.txt UCD-DEMO-MIB.txt UCD-IPFWACC-MIB.txt \ + UCD-DLMOD-MIB.txt UCD-DISKIO-MIB.txt + ++EXTRAMIBS = BGP4-MIB.txt BRIDGE-MIB.txt GNOME-SMI.txt OSPF-MIB.txt \ ++ OSPF-TRAP-MIB.txt RIPv2-MIB.txt SOURCE-ROUTING-MIB.txt \ ++ LM-SENSORS-MIB.txt ++ + DEFAULTMIBS = @default_mibs_install@ + + MIBS = $(V1MIBS) $(V2MIBS) $(V3MIBS) $(RFCMIBS) \ + $(AGENTMIBS) $(IANAMIBS) \ +- $(NETSNMPMIBS) $(UCDMIBS) $(DEFAULTMIBS) ++ $(NETSNMPMIBS) $(UCDMIBS) $(DEFAULTMIBS) $(EXTRAMIBS) + + all: standardall + +diff -ruN net-snmp-5.1.2-orig/mibs/OSPF-MIB.txt net-snmp-5.1.2-5/mibs/OSPF-MIB.txt +--- net-snmp-5.1.2-orig/mibs/OSPF-MIB.txt 1970-01-01 01:00:00.000000000 +0100 ++++ net-snmp-5.1.2-5/mibs/OSPF-MIB.txt 2005-03-13 16:17:21.000000000 +0100 +@@ -0,0 +1,2723 @@ ++OSPF-MIB DEFINITIONS ::= BEGIN ++ ++ IMPORTS ++ MODULE-IDENTITY, OBJECT-TYPE, Counter32, Gauge32, ++ Integer32, IpAddress ++ FROM SNMPv2-SMI ++ TEXTUAL-CONVENTION, TruthValue, RowStatus ++ FROM SNMPv2-TC ++ MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF ++ mib-2 FROM RFC1213-MIB; ++ ++-- This MIB module uses the extended OBJECT-TYPE macro as ++-- defined in [9]. ++ ++ospf MODULE-IDENTITY ++ LAST-UPDATED "9501201225Z" -- Fri Jan 20 12:25:50 PST 1995 ++ ORGANIZATION "IETF OSPF Working Group" ++ CONTACT-INFO ++ " Fred Baker ++ Postal: Cisco Systems ++ 519 Lado Drive ++ Santa Barbara, California 93111 ++ Tel: +1 805 681 0115 ++ E-Mail: fred@cisco.com ++ ++ Rob Coltun ++ Postal: RainbowBridge Communications ++ Tel: (301) 340-9416 ++ E-Mail: rcoltun@rainbow-bridge.com" ++ DESCRIPTION ++ "The MIB module to describe the OSPF Version 2 ++ Protocol" ++ ::= { mib-2 14 } ++ ++-- The Area ID, in OSPF, has the same format as an IP Address, ++-- but has the function of defining a summarization point for ++-- Link State Advertisements ++ ++AreaID ::= TEXTUAL-CONVENTION ++ STATUS current ++ DESCRIPTION ++ "An OSPF Area Identifier." ++ SYNTAX IpAddress ++ ++ ++-- The Router ID, in OSPF, has the same format as an IP Address, ++-- but identifies the router independent of its IP Address. ++ ++RouterID ::= TEXTUAL-CONVENTION ++ STATUS current ++ DESCRIPTION ++ "A OSPF Router Identifier." ++ SYNTAX IpAddress ++ ++ ++-- The OSPF Metric is defined as an unsigned value in the range ++ ++Metric ::= TEXTUAL-CONVENTION ++ STATUS current ++ DESCRIPTION ++ "The OSPF Internal Metric." ++ SYNTAX Integer32 (0..'FFFF'h) ++ ++BigMetric ::= TEXTUAL-CONVENTION ++ STATUS current ++ DESCRIPTION ++ "The OSPF External Metric." ++ SYNTAX Integer32 (0..'FFFFFF'h) ++ ++-- Status Values ++ ++Status ::= TEXTUAL-CONVENTION ++ STATUS current ++ DESCRIPTION ++ "The status of an interface: 'enabled' indicates that ++ it is willing to communicate with other OSPF Routers, ++ while 'disabled' indicates that it is not." ++ SYNTAX INTEGER { enabled (1), disabled (2) } ++ ++-- Time Durations measured in seconds ++ ++PositiveInteger ::= TEXTUAL-CONVENTION ++ STATUS current ++ DESCRIPTION ++ "A positive integer. Values in excess are precluded as ++ unnecessary and prone to interoperability issues." ++ SYNTAX Integer32 (0..'7FFFFFFF'h) ++ ++HelloRange ::= TEXTUAL-CONVENTION ++ STATUS current ++ DESCRIPTION ++ "The range of intervals on which hello messages are ++ exchanged." ++ SYNTAX Integer32 (1..'FFFF'h) ++ ++UpToMaxAge ::= TEXTUAL-CONVENTION ++ STATUS current ++ DESCRIPTION ++ "The values that one might find or configure for ++ variables bounded by the maximum age of an LSA." ++ SYNTAX Integer32 (0..3600) ++ ++ ++-- The range of ifIndex ++ ++InterfaceIndex ::= TEXTUAL-CONVENTION ++ STATUS current ++ DESCRIPTION ++ "The range of ifIndex." ++ SYNTAX Integer32 ++ ++ ++-- Potential Priorities for the Designated Router Election ++ ++DesignatedRouterPriority ::= TEXTUAL-CONVENTION ++ STATUS current ++ DESCRIPTION ++ "The values defined for the priority of a system for ++ becoming the designated router." ++ SYNTAX Integer32 (0..'FF'h) ++ ++TOSType ::= TEXTUAL-CONVENTION ++ STATUS current ++ DESCRIPTION ++ "Type of Service is defined as a mapping to the IP Type of ++ Service Flags as defined in the IP Forwarding Table MIB ++ ++ +-----+-----+-----+-----+-----+-----+-----+-----+ ++ | | | | ++ | PRECEDENCE | TYPE OF SERVICE | 0 | ++ | | | | ++ +-----+-----+-----+-----+-----+-----+-----+-----+ ++ ++ IP TOS IP TOS ++ Field Policy Field Policy ++ ++ Contents Code Contents Code ++ 0 0 0 0 ==> 0 0 0 0 1 ==> 2 ++ 0 0 1 0 ==> 4 0 0 1 1 ==> 6 ++ 0 1 0 0 ==> 8 0 1 0 1 ==> 10 ++ 0 1 1 0 ==> 12 0 1 1 1 ==> 14 ++ 1 0 0 0 ==> 16 1 0 0 1 ==> 18 ++ 1 0 1 0 ==> 20 1 0 1 1 ==> 22 ++ 1 1 0 0 ==> 24 1 1 0 1 ==> 26 ++ 1 1 1 0 ==> 28 1 1 1 1 ==> 30 ++ ++ The remaining values are left for future definition." ++ SYNTAX Integer32 (0..30) ++ ++ ++-- OSPF General Variables ++ ++-- These parameters apply globally to the Router's ++-- OSPF Process. ++ ++ospfGeneralGroup OBJECT IDENTIFIER ::= { ospf 1 } ++ ++ ++ ospfRouterId OBJECT-TYPE ++ SYNTAX RouterID ++ MAX-ACCESS read-write ++ STATUS current ++ DESCRIPTION ++ "A 32-bit integer uniquely identifying the ++ router in the Autonomous System. ++ ++ By convention, to ensure uniqueness, this ++ should default to the value of one of the ++ router's IP interface addresses." ++ REFERENCE ++ "OSPF Version 2, C.1 Global parameters" ++ ::= { ospfGeneralGroup 1 } ++ ++ ++ ospfAdminStat OBJECT-TYPE ++ SYNTAX Status ++ MAX-ACCESS read-write ++ STATUS current ++ DESCRIPTION ++ "The administrative status of OSPF in the ++ router. The value 'enabled' denotes that the ++ OSPF Process is active on at least one inter- ++ face; 'disabled' disables it on all inter- ++ faces." ++ ::= { ospfGeneralGroup 2 } ++ ++ ospfVersionNumber OBJECT-TYPE ++ SYNTAX INTEGER { version2 (2) } ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The current version number of the OSPF proto- ++ col is 2." ++ REFERENCE ++ "OSPF Version 2, Title" ++ ::= { ospfGeneralGroup 3 } ++ ++ ++ ospfAreaBdrRtrStatus OBJECT-TYPE ++ SYNTAX TruthValue ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "A flag to note whether this router is an area ++ border router." ++ REFERENCE ++ "OSPF Version 2, Section 3 Splitting the AS into ++ Areas" ++ ::= { ospfGeneralGroup 4 } ++ ++ ++ ospfASBdrRtrStatus OBJECT-TYPE ++ SYNTAX TruthValue ++ MAX-ACCESS read-write ++ STATUS current ++ DESCRIPTION ++ "A flag to note whether this router is config- ++ ured as an Autonomous System border router." ++ REFERENCE ++ "OSPF Version 2, Section 3.3 Classification of ++ routers" ++ ::= { ospfGeneralGroup 5 } ++ ++ ospfExternLsaCount OBJECT-TYPE ++ SYNTAX Gauge32 ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The number of external (LS type 5) link-state ++ advertisements in the link-state database." ++ REFERENCE ++ "OSPF Version 2, Appendix A.4.5 AS external link ++ advertisements" ++ ::= { ospfGeneralGroup 6 } ++ ++ ++ ospfExternLsaCksumSum OBJECT-TYPE ++ SYNTAX Integer32 ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The 32-bit unsigned sum of the LS checksums of ++ the external link-state advertisements con- ++ tained in the link-state database. This sum ++ can be used to determine if there has been a ++ change in a router's link state database, and ++ to compare the link-state database of two ++ routers." ++ ::= { ospfGeneralGroup 7 } ++ ++ ++ ospfTOSSupport OBJECT-TYPE ++ SYNTAX TruthValue ++ MAX-ACCESS read-write ++ STATUS current ++ DESCRIPTION ++ "The router's support for type-of-service rout- ++ ing." ++ REFERENCE ++ "OSPF Version 2, Appendix F.1.2 Optional TOS ++ support" ++ ::= { ospfGeneralGroup 8 } ++ ++ ospfOriginateNewLsas OBJECT-TYPE ++ SYNTAX Counter32 ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The number of new link-state advertisements ++ that have been originated. This number is in- ++ cremented each time the router originates a new ++ LSA." ++ ::= { ospfGeneralGroup 9 } ++ ++ ++ ospfRxNewLsas OBJECT-TYPE ++ SYNTAX Counter32 ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The number of link-state advertisements re- ++ ceived determined to be new instantiations. ++ This number does not include newer instantia- ++ tions of self-originated link-state advertise- ++ ments." ++ ::= { ospfGeneralGroup 10 } ++ ++ ospfExtLsdbLimit OBJECT-TYPE ++ SYNTAX Integer32 (-1..'7FFFFFFF'h) ++ MAX-ACCESS read-write ++ STATUS current ++ DESCRIPTION ++ "The maximum number of non-default AS- ++ external-LSAs entries that can be stored in the ++ link-state database. If the value is -1, then ++ there is no limit. ++ ++ When the number of non-default AS-external-LSAs ++ in a router's link-state database reaches ++ ospfExtLsdbLimit, the router enters Overflow- ++ State. The router never holds more than ++ ospfExtLsdbLimit non-default AS-external-LSAs ++ in its database. OspfExtLsdbLimit MUST be set ++ identically in all routers attached to the OSPF ++ backbone and/or any regular OSPF area. (i.e., ++ OSPF stub areas and NSSAs are excluded)." ++ DEFVAL { -1 } ++ ::= { ospfGeneralGroup 11 } ++ ++ ospfMulticastExtensions OBJECT-TYPE ++ SYNTAX Integer32 ++ MAX-ACCESS read-write ++ STATUS current ++ DESCRIPTION ++ "A Bit Mask indicating whether the router is ++ forwarding IP multicast (Class D) datagrams ++ based on the algorithms defined in the Multi- ++ cast Extensions to OSPF. ++ ++ Bit 0, if set, indicates that the router can ++ forward IP multicast datagrams in the router's ++ directly attached areas (called intra-area mul- ++ ticast routing). ++ ++ Bit 1, if set, indicates that the router can ++ forward IP multicast datagrams between OSPF ++ areas (called inter-area multicast routing). ++ ++ Bit 2, if set, indicates that the router can ++ forward IP multicast datagrams between Auto- ++ nomous Systems (called inter-AS multicast rout- ++ ing). ++ ++ Only certain combinations of bit settings are ++ allowed, namely: 0 (no multicast forwarding is ++ enabled), 1 (intra-area multicasting only), 3 ++ (intra-area and inter-area multicasting), 5 ++ (intra-area and inter-AS multicasting) and 7 ++ (multicasting everywhere). By default, no mul- ++ ticast forwarding is enabled." ++ DEFVAL { 0 } ++ ::= { ospfGeneralGroup 12 } ++ ++ ospfExitOverflowInterval OBJECT-TYPE ++ SYNTAX PositiveInteger ++ MAX-ACCESS read-write ++ STATUS current ++ DESCRIPTION ++ "The number of seconds that, after entering ++ OverflowState, a router will attempt to leave ++ OverflowState. This allows the router to again ++ originate non-default AS-external-LSAs. When ++ set to 0, the router will not leave Overflow- ++ State until restarted." ++ DEFVAL { 0 } ++ ::= { ospfGeneralGroup 13 } ++ ++ ++ ospfDemandExtensions OBJECT-TYPE ++ SYNTAX TruthValue ++ MAX-ACCESS read-write ++ STATUS current ++ DESCRIPTION ++ "The router's support for demand routing." ++ REFERENCE ++ "OSPF Version 2, Appendix on Demand Routing" ++ ::= { ospfGeneralGroup 14 } ++ ++ ++-- The OSPF Area Data Structure contains information ++-- regarding the various areas. The interfaces and ++-- virtual links are configured as part of these areas. ++-- Area 0.0.0.0, by definition, is the Backbone Area ++ ++ ++ ospfAreaTable OBJECT-TYPE ++ SYNTAX SEQUENCE OF OspfAreaEntry ++ MAX-ACCESS not-accessible ++ STATUS current ++ DESCRIPTION ++ "Information describing the configured parame- ++ ters and cumulative statistics of the router's ++ attached areas." ++ REFERENCE ++ "OSPF Version 2, Section 6 The Area Data Struc- ++ ture" ++ ::= { ospf 2 } ++ ++ ++ ospfAreaEntry OBJECT-TYPE ++ SYNTAX OspfAreaEntry ++ MAX-ACCESS not-accessible ++ STATUS current ++ DESCRIPTION ++ "Information describing the configured parame- ++ ters and cumulative statistics of one of the ++ router's attached areas." ++ INDEX { ospfAreaId } ++ ::= { ospfAreaTable 1 } ++ ++OspfAreaEntry ::= ++ SEQUENCE { ++ ospfAreaId ++ AreaID, ++ ospfAuthType ++ Integer32, ++ ospfImportAsExtern ++ INTEGER, ++ ospfSpfRuns ++ Counter32, ++ ospfAreaBdrRtrCount ++ Gauge32, ++ ospfAsBdrRtrCount ++ Gauge32, ++ ospfAreaLsaCount ++ Gauge32, ++ ospfAreaLsaCksumSum ++ Integer32, ++ ospfAreaSummary ++ INTEGER, ++ ospfAreaStatus ++ RowStatus ++ } ++ ++ ospfAreaId OBJECT-TYPE ++ SYNTAX AreaID ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "A 32-bit integer uniquely identifying an area. ++ Area ID 0.0.0.0 is used for the OSPF backbone." ++ REFERENCE ++ "OSPF Version 2, Appendix C.2 Area parameters" ++ ::= { ospfAreaEntry 1 } ++ ++ ++ ospfAuthType OBJECT-TYPE ++ SYNTAX Integer32 ++ -- none (0), ++ -- simplePassword (1) ++ -- md5 (2) ++ -- reserved for specification by IANA (> 2) ++ MAX-ACCESS read-create ++ STATUS obsolete ++ DESCRIPTION ++ "The authentication type specified for an area. ++ Additional authentication types may be assigned ++ locally on a per Area basis." ++ REFERENCE ++ "OSPF Version 2, Appendix E Authentication" ++ DEFVAL { 0 } -- no authentication, by default ++ ::= { ospfAreaEntry 2 } ++ ++ ospfImportAsExtern OBJECT-TYPE ++ SYNTAX INTEGER { ++ importExternal (1), ++ importNoExternal (2), ++ importNssa (3) ++ } ++ MAX-ACCESS read-create ++ STATUS current ++ DESCRIPTION ++ "The area's support for importing AS external ++ link- state advertisements." ++ REFERENCE ++ "OSPF Version 2, Appendix C.2 Area parameters" ++ DEFVAL { importExternal } ++ ::= { ospfAreaEntry 3 } ++ ++ ++ ospfSpfRuns OBJECT-TYPE ++ SYNTAX Counter32 ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The number of times that the intra-area route ++ table has been calculated using this area's ++ link-state database. This is typically done ++ using Dijkstra's algorithm." ++ ::= { ospfAreaEntry 4 } ++ ++ ++ ospfAreaBdrRtrCount OBJECT-TYPE ++ SYNTAX Gauge32 ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The total number of area border routers reach- ++ able within this area. This is initially zero, ++ and is calculated in each SPF Pass." ++ ::= { ospfAreaEntry 5 } ++ ++ ospfAsBdrRtrCount OBJECT-TYPE ++ SYNTAX Gauge32 ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The total number of Autonomous System border ++ routers reachable within this area. This is ++ initially zero, and is calculated in each SPF ++ Pass." ++ ::= { ospfAreaEntry 6 } ++ ++ ++ ospfAreaLsaCount OBJECT-TYPE ++ SYNTAX Gauge32 ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The total number of link-state advertisements ++ in this area's link-state database, excluding ++ AS External LSA's." ++ ::= { ospfAreaEntry 7 } ++ ++ ++ ospfAreaLsaCksumSum OBJECT-TYPE ++ SYNTAX Integer32 ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The 32-bit unsigned sum of the link-state ad- ++ vertisements' LS checksums contained in this ++ area's link-state database. This sum excludes ++ external (LS type 5) link-state advertisements. ++ The sum can be used to determine if there has ++ been a change in a router's link state data- ++ base, and to compare the link-state database of ++ two routers." ++ DEFVAL { 0 } ++ ::= { ospfAreaEntry 8 } ++ ++ ospfAreaSummary OBJECT-TYPE ++ SYNTAX INTEGER { ++ noAreaSummary (1), ++ sendAreaSummary (2) ++ } ++ MAX-ACCESS read-create ++ STATUS current ++ DESCRIPTION ++ "The variable ospfAreaSummary controls the im- ++ port of summary LSAs into stub areas. It has ++ no effect on other areas. ++ ++ If it is noAreaSummary, the router will neither ++ originate nor propagate summary LSAs into the ++ stub area. It will rely entirely on its de- ++ fault route. ++ ++ If it is sendAreaSummary, the router will both ++ summarize and propagate summary LSAs." ++ DEFVAL { noAreaSummary } ++ ::= { ospfAreaEntry 9 } ++ ++ ++ ospfAreaStatus OBJECT-TYPE ++ SYNTAX RowStatus ++ MAX-ACCESS read-create ++ STATUS current ++ DESCRIPTION ++ "This variable displays the status of the en- ++ try. Setting it to 'invalid' has the effect of ++ rendering it inoperative. The internal effect ++ (row removal) is implementation dependent." ++ ::= { ospfAreaEntry 10 } ++ ++ ++-- OSPF Area Default Metric Table ++ ++-- The OSPF Area Default Metric Table describes the metrics ++-- that a default Area Border Router will advertise into a ++-- Stub area. ++ ++ ++ ospfStubAreaTable OBJECT-TYPE ++ SYNTAX SEQUENCE OF OspfStubAreaEntry ++ MAX-ACCESS not-accessible ++ STATUS current ++ DESCRIPTION ++ "The set of metrics that will be advertised by ++ a default Area Border Router into a stub area." ++ REFERENCE ++ "OSPF Version 2, Appendix C.2, Area Parameters" ++ ::= { ospf 3 } ++ ++ ++ ospfStubAreaEntry OBJECT-TYPE ++ SYNTAX OspfStubAreaEntry ++ MAX-ACCESS not-accessible ++ STATUS current ++ DESCRIPTION ++ "The metric for a given Type of Service that ++ will be advertised by a default Area Border ++ Router into a stub area." ++ REFERENCE ++ "OSPF Version 2, Appendix C.2, Area Parameters" ++ INDEX { ospfStubAreaId, ospfStubTOS } ++ ::= { ospfStubAreaTable 1 } ++ ++OspfStubAreaEntry ::= ++ SEQUENCE { ++ ospfStubAreaId ++ AreaID, ++ ospfStubTOS ++ TOSType, ++ ospfStubMetric ++ BigMetric, ++ ospfStubStatus ++ RowStatus, ++ ospfStubMetricType ++ INTEGER ++ } ++ ++ ospfStubAreaId OBJECT-TYPE ++ SYNTAX AreaID ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The 32 bit identifier for the Stub Area. On ++ creation, this can be derived from the in- ++ stance." ++ ::= { ospfStubAreaEntry 1 } ++ ++ ++ ospfStubTOS OBJECT-TYPE ++ SYNTAX TOSType ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The Type of Service associated with the ++ metric. On creation, this can be derived from ++ the instance." ++ ::= { ospfStubAreaEntry 2 } ++ ++ ++ ospfStubMetric OBJECT-TYPE ++ SYNTAX BigMetric ++ MAX-ACCESS read-create ++ STATUS current ++ DESCRIPTION ++ "The metric value applied at the indicated type ++ of service. By default, this equals the least ++ metric at the type of service among the inter- ++ faces to other areas." ++ ::= { ospfStubAreaEntry 3 } ++ ++ ++ ospfStubStatus OBJECT-TYPE ++ SYNTAX RowStatus ++ MAX-ACCESS read-create ++ STATUS current ++ DESCRIPTION ++ "This variable displays the status of the en- ++ try. Setting it to 'invalid' has the effect of ++ rendering it inoperative. The internal effect ++ (row removal) is implementation dependent." ++ ::= { ospfStubAreaEntry 4 } ++ ++ ospfStubMetricType OBJECT-TYPE ++ SYNTAX INTEGER { ++ ospfMetric (1), -- OSPF Metric ++ comparableCost (2), -- external type 1 ++ nonComparable (3) -- external type 2 ++ } ++ MAX-ACCESS read-create ++ STATUS current ++ DESCRIPTION ++ "This variable displays the type of metric ad- ++ vertised as a default route." ++ DEFVAL { ospfMetric } ++ ::= { ospfStubAreaEntry 5 } ++ ++-- OSPF Link State Database ++ ++-- The Link State Database contains the Link State ++-- Advertisements from throughout the areas that the ++-- device is attached to. ++ ++ ++ ospfLsdbTable OBJECT-TYPE ++ SYNTAX SEQUENCE OF OspfLsdbEntry ++ MAX-ACCESS not-accessible ++ STATUS current ++ DESCRIPTION ++ "The OSPF Process's Link State Database." ++ REFERENCE ++ "OSPF Version 2, Section 12 Link State Adver- ++ tisements" ++ ::= { ospf 4 } ++ ++ ++ ospfLsdbEntry OBJECT-TYPE ++ SYNTAX OspfLsdbEntry ++ MAX-ACCESS not-accessible ++ STATUS current ++ DESCRIPTION ++ "A single Link State Advertisement." ++ INDEX { ospfLsdbAreaId, ospfLsdbType, ++ ospfLsdbLsid, ospfLsdbRouterId } ++ ::= { ospfLsdbTable 1 } ++ ++OspfLsdbEntry ::= ++ SEQUENCE { ++ ospfLsdbAreaId ++ AreaID, ++ ospfLsdbType ++ INTEGER, ++ ospfLsdbLsid ++ IpAddress, ++ ospfLsdbRouterId ++ RouterID, ++ ospfLsdbSequence ++ Integer32, ++ ospfLsdbAge ++ Integer32, ++ ospfLsdbChecksum ++ Integer32, ++ ospfLsdbAdvertisement ++ OCTET STRING ++ } ++ ospfLsdbAreaId OBJECT-TYPE ++ SYNTAX AreaID ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The 32 bit identifier of the Area from which ++ the LSA was received." ++ REFERENCE ++ "OSPF Version 2, Appendix C.2 Area parameters" ++ ::= { ospfLsdbEntry 1 } ++ ++-- External Link State Advertisements are permitted ++-- for backward compatibility, but should be displayed in ++-- the ospfExtLsdbTable rather than here. ++ ++ ospfLsdbType OBJECT-TYPE ++ SYNTAX INTEGER { ++ routerLink (1), ++ networkLink (2), ++ summaryLink (3), ++ asSummaryLink (4), ++ asExternalLink (5), -- but see ospfExtLsdbTable ++ multicastLink (6), ++ nssaExternalLink (7) ++ } ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The type of the link state advertisement. ++ Each link state type has a separate advertise- ++ ment format." ++ REFERENCE ++ "OSPF Version 2, Appendix A.4.1 The Link State ++ Advertisement header" ++ ::= { ospfLsdbEntry 2 } ++ ++ ospfLsdbLsid OBJECT-TYPE ++ SYNTAX IpAddress ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The Link State ID is an LS Type Specific field ++ containing either a Router ID or an IP Address; ++ it identifies the piece of the routing domain ++ that is being described by the advertisement." ++ REFERENCE ++ "OSPF Version 2, Section 12.1.4 Link State ID" ++ ::= { ospfLsdbEntry 3 } ++ ospfLsdbRouterId OBJECT-TYPE ++ SYNTAX RouterID ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The 32 bit number that uniquely identifies the ++ originating router in the Autonomous System." ++ REFERENCE ++ "OSPF Version 2, Appendix C.1 Global parameters" ++ ::= { ospfLsdbEntry 4 } ++ ++-- Note that the OSPF Sequence Number is a 32 bit signed ++-- integer. It starts with the value '80000001'h, ++-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h ++-- Thus, a typical sequence number will be very negative. ++ ++ ospfLsdbSequence OBJECT-TYPE ++ SYNTAX Integer32 ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The sequence number field is a signed 32-bit ++ integer. It is used to detect old and dupli- ++ cate link state advertisements. The space of ++ sequence numbers is linearly ordered. The ++ larger the sequence number the more recent the ++ advertisement." ++ REFERENCE ++ "OSPF Version 2, Section 12.1.6 LS sequence ++ number" ++ ::= { ospfLsdbEntry 5 } ++ ++ ++ ospfLsdbAge OBJECT-TYPE ++ SYNTAX Integer32 -- Should be 0..MaxAge ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "This field is the age of the link state adver- ++ tisement in seconds." ++ REFERENCE ++ "OSPF Version 2, Section 12.1.1 LS age" ++ ::= { ospfLsdbEntry 6 } ++ ++ ospfLsdbChecksum OBJECT-TYPE ++ SYNTAX Integer32 ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "This field is the checksum of the complete ++ contents of the advertisement, excepting the ++ age field. The age field is excepted so that ++ an advertisement's age can be incremented ++ without updating the checksum. The checksum ++ used is the same that is used for ISO connec- ++ tionless datagrams; it is commonly referred to ++ as the Fletcher checksum." ++ REFERENCE ++ "OSPF Version 2, Section 12.1.7 LS checksum" ++ ::= { ospfLsdbEntry 7 } ++ ++ ++ ospfLsdbAdvertisement OBJECT-TYPE ++ SYNTAX OCTET STRING (SIZE (1..65535)) ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The entire Link State Advertisement, including ++ its header." ++ REFERENCE ++ "OSPF Version 2, Section 12 Link State Adver- ++ tisements" ++ ::= { ospfLsdbEntry 8 } ++ ++ ++-- Address Range Table ++ ++-- The Address Range Table acts as an adjunct to the Area ++-- Table; It describes those Address Range Summaries that ++-- are configured to be propagated from an Area to reduce ++-- the amount of information about it which is known beyond ++-- its borders. ++ ++ ospfAreaRangeTable OBJECT-TYPE ++ SYNTAX SEQUENCE OF OspfAreaRangeEntry ++ MAX-ACCESS not-accessible ++ STATUS obsolete ++ DESCRIPTION ++ "A range if IP addresses specified by an IP ++ address/IP network mask pair. For example, ++ class B address range of X.X.X.X with a network ++ mask of 255.255.0.0 includes all IP addresses ++ from X.X.0.0 to X.X.255.255" ++ REFERENCE ++ "OSPF Version 2, Appendix C.2 Area parameters" ++ ::= { ospf 5 } ++ ospfAreaRangeEntry OBJECT-TYPE ++ SYNTAX OspfAreaRangeEntry ++ MAX-ACCESS not-accessible ++ STATUS obsolete ++ DESCRIPTION ++ "A range if IP addresses specified by an IP ++ address/IP network mask pair. For example, ++ class B address range of X.X.X.X with a network ++ mask of 255.255.0.0 includes all IP addresses ++ from X.X.0.0 to X.X.255.255" ++ REFERENCE ++ "OSPF Version 2, Appendix C.2 Area parameters" ++ INDEX { ospfAreaRangeAreaId, ospfAreaRangeNet } ++ ::= { ospfAreaRangeTable 1 } ++ ++OspfAreaRangeEntry ::= ++ SEQUENCE { ++ ospfAreaRangeAreaId ++ AreaID, ++ ospfAreaRangeNet ++ IpAddress, ++ ospfAreaRangeMask ++ IpAddress, ++ ospfAreaRangeStatus ++ RowStatus, ++ ospfAreaRangeEffect ++ INTEGER ++ } ++ ++ ospfAreaRangeAreaId OBJECT-TYPE ++ SYNTAX AreaID ++ MAX-ACCESS read-only ++ STATUS obsolete ++ DESCRIPTION ++ "The Area the Address Range is to be found ++ within." ++ REFERENCE ++ "OSPF Version 2, Appendix C.2 Area parameters" ++ ::= { ospfAreaRangeEntry 1 } ++ ++ ++ ospfAreaRangeNet OBJECT-TYPE ++ SYNTAX IpAddress ++ MAX-ACCESS read-only ++ STATUS obsolete ++ DESCRIPTION ++ "The IP Address of the Net or Subnet indicated ++ by the range." ++ REFERENCE ++ "OSPF Version 2, Appendix C.2 Area parameters" ++ ::= { ospfAreaRangeEntry 2 } ++ ++ ++ ospfAreaRangeMask OBJECT-TYPE ++ SYNTAX IpAddress ++ MAX-ACCESS read-create ++ STATUS obsolete ++ DESCRIPTION ++ "The Subnet Mask that pertains to the Net or ++ Subnet." ++ REFERENCE ++ "OSPF Version 2, Appendix C.2 Area parameters" ++ ::= { ospfAreaRangeEntry 3 } ++ ++ ospfAreaRangeStatus OBJECT-TYPE ++ SYNTAX RowStatus ++ MAX-ACCESS read-create ++ STATUS obsolete ++ DESCRIPTION ++ "This variable displays the status of the en- ++ try. Setting it to 'invalid' has the effect of ++ rendering it inoperative. The internal effect ++ (row removal) is implementation dependent." ++ ::= { ospfAreaRangeEntry 4 } ++ ++ ++ ospfAreaRangeEffect OBJECT-TYPE ++ SYNTAX INTEGER { ++ advertiseMatching (1), ++ doNotAdvertiseMatching (2) ++ } ++ MAX-ACCESS read-create ++ STATUS obsolete ++ DESCRIPTION ++ "Subnets subsumed by ranges either trigger the ++ advertisement of the indicated summary (adver- ++ tiseMatching), or result in the subnet's not ++ being advertised at all outside the area." ++ DEFVAL { advertiseMatching } ++ ::= { ospfAreaRangeEntry 5 } ++ ++ ++ ++-- OSPF Host Table ++ ++-- The Host/Metric Table indicates what hosts are directly ++-- attached to the Router, and what metrics and types of ++-- service should be advertised for them. ++ ++ ospfHostTable OBJECT-TYPE ++ SYNTAX SEQUENCE OF OspfHostEntry ++ MAX-ACCESS not-accessible ++ STATUS current ++ DESCRIPTION ++ "The list of Hosts, and their metrics, that the ++ router will advertise as host routes." ++ REFERENCE ++ "OSPF Version 2, Appendix C.6 Host route param- ++ eters" ++ ::= { ospf 6 } ++ ++ ++ ospfHostEntry OBJECT-TYPE ++ SYNTAX OspfHostEntry ++ MAX-ACCESS not-accessible ++ STATUS current ++ DESCRIPTION ++ "A metric to be advertised, for a given type of ++ service, when a given host is reachable." ++ INDEX { ospfHostIpAddress, ospfHostTOS } ++ ::= { ospfHostTable 1 } ++ ++OspfHostEntry ::= ++ SEQUENCE { ++ ospfHostIpAddress ++ IpAddress, ++ ospfHostTOS ++ TOSType, ++ ospfHostMetric ++ Metric, ++ ospfHostStatus ++ RowStatus, ++ ospfHostAreaID ++ AreaID ++ } ++ ++ ospfHostIpAddress OBJECT-TYPE ++ SYNTAX IpAddress ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The IP Address of the Host." ++ REFERENCE ++ "OSPF Version 2, Appendix C.6 Host route parame- ++ ters" ++ ::= { ospfHostEntry 1 } ++ ++ ++ ospfHostTOS OBJECT-TYPE ++ SYNTAX TOSType ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The Type of Service of the route being config- ++ ured." ++ REFERENCE ++ "OSPF Version 2, Appendix C.6 Host route parame- ++ ters" ++ ::= { ospfHostEntry 2 } ++ ++ ++ ospfHostMetric OBJECT-TYPE ++ SYNTAX Metric ++ MAX-ACCESS read-create ++ STATUS current ++ DESCRIPTION ++ "The Metric to be advertised." ++ REFERENCE ++ "OSPF Version 2, Appendix C.6 Host route parame- ++ ters" ++ ::= { ospfHostEntry 3 } ++ ++ ospfHostStatus OBJECT-TYPE ++ SYNTAX RowStatus ++ MAX-ACCESS read-create ++ STATUS current ++ DESCRIPTION ++ "This variable displays the status of the en- ++ try. Setting it to 'invalid' has the effect of ++ rendering it inoperative. The internal effect ++ (row removal) is implementation dependent." ++ ::= { ospfHostEntry 4 } ++ ++ ++ ospfHostAreaID OBJECT-TYPE ++ SYNTAX AreaID ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The Area the Host Entry is to be found within. ++ By default, the area that a subsuming OSPF in- ++ terface is in, or 0.0.0.0" ++ REFERENCE ++ "OSPF Version 2, Appendix C.2 Area parameters" ++ ::= { ospfHostEntry 5 } ++ ++ ++-- OSPF Interface Table ++ ++-- The OSPF Interface Table augments the ipAddrTable ++-- with OSPF specific information. ++ ++ ospfIfTable OBJECT-TYPE ++ SYNTAX SEQUENCE OF OspfIfEntry ++ MAX-ACCESS not-accessible ++ STATUS current ++ DESCRIPTION ++ "The OSPF Interface Table describes the inter- ++ faces from the viewpoint of OSPF." ++ REFERENCE ++ "OSPF Version 2, Appendix C.3 Router interface ++ parameters" ++ ::= { ospf 7 } ++ ++ ++ ospfIfEntry OBJECT-TYPE ++ SYNTAX OspfIfEntry ++ MAX-ACCESS not-accessible ++ STATUS current ++ DESCRIPTION ++ "The OSPF Interface Entry describes one inter- ++ face from the viewpoint of OSPF." ++ INDEX { ospfIfIpAddress, ospfAddressLessIf } ++ ::= { ospfIfTable 1 } ++ ++OspfIfEntry ::= ++ SEQUENCE { ++ ospfIfIpAddress ++ IpAddress, ++ ospfAddressLessIf ++ Integer32, ++ ospfIfAreaId ++ AreaID, ++ ospfIfType ++ INTEGER, ++ ospfIfAdminStat ++ Status, ++ ospfIfRtrPriority ++ DesignatedRouterPriority, ++ ospfIfTransitDelay ++ UpToMaxAge, ++ ospfIfRetransInterval ++ UpToMaxAge, ++ ospfIfHelloInterval ++ HelloRange, ++ ospfIfRtrDeadInterval ++ PositiveInteger, ++ ospfIfPollInterval ++ PositiveInteger, ++ ospfIfState ++ INTEGER, ++ ospfIfDesignatedRouter ++ IpAddress, ++ ospfIfBackupDesignatedRouter ++ IpAddress, ++ ospfIfEvents ++ Counter32, ++ ospfIfAuthType ++ INTEGER, ++ ospfIfAuthKey ++ OCTET STRING, ++ ospfIfStatus ++ RowStatus, ++ ospfIfMulticastForwarding ++ INTEGER, ++ ospfIfDemand ++ TruthValue ++ } ++ ++ ospfIfIpAddress OBJECT-TYPE ++ SYNTAX IpAddress ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The IP address of this OSPF interface." ++ ::= { ospfIfEntry 1 } ++ ++ ospfAddressLessIf OBJECT-TYPE ++ SYNTAX Integer32 ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "For the purpose of easing the instancing of ++ addressed and addressless interfaces; This ++ variable takes the value 0 on interfaces with ++ IP Addresses, and the corresponding value of ++ ifIndex for interfaces having no IP Address." ++ ::= { ospfIfEntry 2 } ++ ospfIfAreaId OBJECT-TYPE ++ SYNTAX AreaID ++ MAX-ACCESS read-create ++ STATUS current ++ DESCRIPTION ++ "A 32-bit integer uniquely identifying the area ++ to which the interface connects. Area ID ++ 0.0.0.0 is used for the OSPF backbone." ++ DEFVAL { '00000000'H } -- 0.0.0.0 ++ ::= { ospfIfEntry 3 } ++ ++ ospfIfType OBJECT-TYPE ++ SYNTAX INTEGER { ++ broadcast (1), ++ nbma (2), ++ pointToPoint (3), ++ pointToMultipoint (5) ++ } ++ MAX-ACCESS read-create ++ STATUS current ++ DESCRIPTION ++ "The OSPF interface type. ++ ++ By way of a default, this field may be intuited ++ from the corresponding value of ifType. Broad- ++ cast LANs, such as Ethernet and IEEE 802.5, ++ take the value 'broadcast', X.25 and similar ++ technologies take the value 'nbma', and links ++ that are definitively point to point take the ++ value 'pointToPoint'." ++ ::= { ospfIfEntry 4 } ++ ++ ++ ospfIfAdminStat OBJECT-TYPE ++ SYNTAX Status ++ MAX-ACCESS read-create ++ STATUS current ++ DESCRIPTION ++ "The OSPF interface's administrative status. ++ The value formed on the interface, and the in- ++ terface will be advertised as an internal route ++ to some area. The value 'disabled' denotes ++ that the interface is external to OSPF." ++ DEFVAL { enabled } ++ ::= { ospfIfEntry 5 } ++ ++ ospfIfRtrPriority OBJECT-TYPE ++ SYNTAX DesignatedRouterPriority ++ MAX-ACCESS read-create ++ STATUS current ++ DESCRIPTION ++ "The priority of this interface. Used in ++ multi-access networks, this field is used in ++ the designated router election algorithm. The ++ value 0 signifies that the router is not eligi- ++ ble to become the designated router on this ++ particular network. In the event of a tie in ++ this value, routers will use their Router ID as ++ a tie breaker." ++ DEFVAL { 1 } ++ ::= { ospfIfEntry 6 } ++ ++ ++ ospfIfTransitDelay OBJECT-TYPE ++ SYNTAX UpToMaxAge ++ MAX-ACCESS read-create ++ STATUS current ++ DESCRIPTION ++ "The estimated number of seconds it takes to ++ transmit a link state update packet over this ++ interface." ++ DEFVAL { 1 } ++ ::= { ospfIfEntry 7 } ++ ++ ++ ospfIfRetransInterval OBJECT-TYPE ++ SYNTAX UpToMaxAge ++ MAX-ACCESS read-create ++ STATUS current ++ DESCRIPTION ++ "The number of seconds between link-state ad- ++ vertisement retransmissions, for adjacencies ++ belonging to this interface. This value is ++ also used when retransmitting database descrip- ++ tion and link-state request packets." ++ DEFVAL { 5 } ++ ::= { ospfIfEntry 8 } ++ ++ ++ ospfIfHelloInterval OBJECT-TYPE ++ SYNTAX HelloRange ++ MAX-ACCESS read-create ++ STATUS current ++ DESCRIPTION ++ "The length of time, in seconds, between the ++ Hello packets that the router sends on the in- ++ terface. This value must be the same for all ++ routers attached to a common network." ++ DEFVAL { 10 } ++ ::= { ospfIfEntry 9 } ++ ++ ++ ospfIfRtrDeadInterval OBJECT-TYPE ++ SYNTAX PositiveInteger ++ MAX-ACCESS read-create ++ STATUS current ++ DESCRIPTION ++ "The number of seconds that a router's Hello ++ packets have not been seen before it's neigh- ++ bors declare the router down. This should be ++ some multiple of the Hello interval. This ++ value must be the same for all routers attached ++ to a common network." ++ DEFVAL { 40 } ++ ::= { ospfIfEntry 10 } ++ ++ ++ ospfIfPollInterval OBJECT-TYPE ++ SYNTAX PositiveInteger ++ MAX-ACCESS read-create ++ STATUS current ++ DESCRIPTION ++ "The larger time interval, in seconds, between ++ the Hello packets sent to an inactive non- ++ broadcast multi- access neighbor." ++ DEFVAL { 120 } ++ ::= { ospfIfEntry 11 } ++ ++ ++ ospfIfState OBJECT-TYPE ++ SYNTAX INTEGER { ++ down (1), ++ loopback (2), ++ waiting (3), ++ pointToPoint (4), ++ designatedRouter (5), ++ backupDesignatedRouter (6), ++ otherDesignatedRouter (7) ++ } ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The OSPF Interface State." ++ DEFVAL { down } ++ ::= { ospfIfEntry 12 } ++ ++ ++ ospfIfDesignatedRouter OBJECT-TYPE ++ SYNTAX IpAddress ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The IP Address of the Designated Router." ++ DEFVAL { '00000000'H } -- 0.0.0.0 ++ ::= { ospfIfEntry 13 } ++ ++ ++ ospfIfBackupDesignatedRouter OBJECT-TYPE ++ SYNTAX IpAddress ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The IP Address of the Backup Designated ++ Router." ++ DEFVAL { '00000000'H } -- 0.0.0.0 ++ ::= { ospfIfEntry 14 } ++ ++ ospfIfEvents OBJECT-TYPE ++ SYNTAX Counter32 ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The number of times this OSPF interface has ++ changed its state, or an error has occurred." ++ ::= { ospfIfEntry 15 } ++ ++ ++ ospfIfAuthKey OBJECT-TYPE ++ SYNTAX OCTET STRING (SIZE (0..256)) ++ MAX-ACCESS read-create ++ STATUS current ++ DESCRIPTION ++ "The Authentication Key. If the Area's Author- ++ ization Type is simplePassword, and the key ++ length is shorter than 8 octets, the agent will ++ left adjust and zero fill to 8 octets. ++ ++ Note that unauthenticated interfaces need no ++ authentication key, and simple password authen- ++ tication cannot use a key of more than 8 oc- ++ tets. Larger keys are useful only with authen- ++ tication mechanisms not specified in this docu- ++ ment. ++ ++ When read, ospfIfAuthKey always returns an Oc- ++ tet String of length zero." ++ REFERENCE ++ "OSPF Version 2, Section 9 The Interface Data ++ Structure" ++ DEFVAL { '0000000000000000'H } -- 0.0.0.0.0.0.0.0 ++ ::= { ospfIfEntry 16 } ++ ++ ospfIfStatus OBJECT-TYPE ++ SYNTAX RowStatus ++ MAX-ACCESS read-create ++ STATUS current ++ DESCRIPTION ++ "This variable displays the status of the en- ++ try. Setting it to 'invalid' has the effect of ++ rendering it inoperative. The internal effect ++ (row removal) is implementation dependent." ++ ::= { ospfIfEntry 17 } ++ ++ ++ ospfIfMulticastForwarding OBJECT-TYPE ++ SYNTAX INTEGER { ++ blocked (1), -- no multicast forwarding ++ multicast (2), -- using multicast address ++ unicast (3) -- to each OSPF neighbor ++ } ++ MAX-ACCESS read-create ++ STATUS current ++ DESCRIPTION ++ "The way multicasts should forwarded on this ++ interface; not forwarded, forwarded as data ++ link multicasts, or forwarded as data link uni- ++ casts. Data link multicasting is not meaning- ++ ful on point to point and NBMA interfaces, and ++ setting ospfMulticastForwarding to 0 effective- ++ ly disables all multicast forwarding." ++ DEFVAL { blocked } ++ ::= { ospfIfEntry 18 } ++ ++ ++ ospfIfDemand OBJECT-TYPE ++ SYNTAX TruthValue ++ MAX-ACCESS read-create ++ STATUS current ++ DESCRIPTION ++ "Indicates whether Demand OSPF procedures (hel- ++ lo supression to FULL neighbors and setting the ++ DoNotAge flag on proogated LSAs) should be per- ++ formed on this interface." ++ DEFVAL { false } ++ ::= { ospfIfEntry 19 } ++ ++ ++ ospfIfAuthType OBJECT-TYPE ++ SYNTAX INTEGER (0..255) ++ -- none (0), ++ -- simplePassword (1) ++ -- md5 (2) ++ -- reserved for specification by IANA (> 2) ++ MAX-ACCESS read-create ++ STATUS current ++ DESCRIPTION ++ "The authentication type specified for an in- ++ terface. Additional authentication types may ++ be assigned locally." ++ REFERENCE ++ "OSPF Version 2, Appendix E Authentication" ++ DEFVAL { 0 } -- no authentication, by default ++ ::= { ospfIfEntry 20 } ++ ++ ++-- OSPF Interface Metric Table ++ ++-- The Metric Table describes the metrics to be advertised ++-- for a specified interface at the various types of service. ++-- As such, this table is an adjunct of the OSPF Interface ++-- Table. ++ ++-- Types of service, as defined by RFC 791, have the ability ++-- to request low delay, high bandwidth, or reliable linkage. ++ ++-- For the purposes of this specification, the measure of ++-- bandwidth ++ ++-- Metric = 10^8 / ifSpeed ++ ++-- is the default value. For multiple link interfaces, note ++-- that ifSpeed is the sum of the individual link speeds. ++-- This yields a number having the following typical values: ++ ++-- Network Type/bit rate Metric ++ ++-- >= 100 MBPS 1 ++-- Ethernet/802.3 10 ++-- E1 48 ++-- T1 (ESF) 65 ++-- 64 KBPS 1562 ++-- 56 KBPS 1785 ++-- 19.2 KBPS 5208 ++-- 9.6 KBPS 10416 ++ ++-- Routes that are not specified use the default (TOS 0) metric ++ ++ ospfIfMetricTable OBJECT-TYPE ++ SYNTAX SEQUENCE OF OspfIfMetricEntry ++ MAX-ACCESS not-accessible ++ STATUS current ++ DESCRIPTION ++ "The TOS metrics for a non-virtual interface ++ identified by the interface index." ++ REFERENCE ++ "OSPF Version 2, Appendix C.3 Router interface ++ parameters" ++ ::= { ospf 8 } ++ ++ ospfIfMetricEntry OBJECT-TYPE ++ SYNTAX OspfIfMetricEntry ++ MAX-ACCESS not-accessible ++ STATUS current ++ DESCRIPTION ++ "A particular TOS metric for a non-virtual in- ++ terface identified by the interface index." ++ REFERENCE ++ "OSPF Version 2, Appendix C.3 Router interface ++ parameters" ++ INDEX { ospfIfMetricIpAddress, ++ ospfIfMetricAddressLessIf, ++ ospfIfMetricTOS } ++ ::= { ospfIfMetricTable 1 } ++ ++OspfIfMetricEntry ::= ++ SEQUENCE { ++ ospfIfMetricIpAddress ++ IpAddress, ++ ospfIfMetricAddressLessIf ++ Integer32, ++ ospfIfMetricTOS ++ TOSType, ++ ospfIfMetricValue ++ Metric, ++ ospfIfMetricStatus ++ RowStatus ++ } ++ ++ ospfIfMetricIpAddress OBJECT-TYPE ++ SYNTAX IpAddress ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The IP address of this OSPF interface. On row ++ creation, this can be derived from the in- ++ stance." ++ ::= { ospfIfMetricEntry 1 } ++ ++ ospfIfMetricAddressLessIf OBJECT-TYPE ++ SYNTAX Integer32 ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "For the purpose of easing the instancing of ++ addressed and addressless interfaces; This ++ variable takes the value 0 on interfaces with ++ IP Addresses, and the value of ifIndex for in- ++ terfaces having no IP Address. On row crea- ++ tion, this can be derived from the instance." ++ ::= { ospfIfMetricEntry 2 } ++ ++ ++ ospfIfMetricTOS OBJECT-TYPE ++ SYNTAX TOSType ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The type of service metric being referenced. ++ On row creation, this can be derived from the ++ instance." ++ ::= { ospfIfMetricEntry 3 } ++ ++ ++ ospfIfMetricValue OBJECT-TYPE ++ SYNTAX Metric ++ MAX-ACCESS read-create ++ STATUS current ++ DESCRIPTION ++ "The metric of using this type of service on ++ this interface. The default value of the TOS 0 ++ Metric is 10^8 / ifSpeed." ++ ::= { ospfIfMetricEntry 4 } ++ ++ ospfIfMetricStatus OBJECT-TYPE ++ SYNTAX RowStatus ++ MAX-ACCESS read-create ++ STATUS current ++ DESCRIPTION ++ "This variable displays the status of the en- ++ try. Setting it to 'invalid' has the effect of ++ rendering it inoperative. The internal effect ++ (row removal) is implementation dependent." ++ ::= { ospfIfMetricEntry 5 } ++ ++ ++-- OSPF Virtual Interface Table ++ ++-- The Virtual Interface Table describes the virtual ++-- links that the OSPF Process is configured to ++-- carry on. ++ ++ ospfVirtIfTable OBJECT-TYPE ++ SYNTAX SEQUENCE OF OspfVirtIfEntry ++ MAX-ACCESS not-accessible ++ STATUS current ++ DESCRIPTION ++ "Information about this router's virtual inter- ++ faces." ++ REFERENCE ++ "OSPF Version 2, Appendix C.4 Virtual link ++ parameters" ++ ::= { ospf 9 } ++ ++ ++ ospfVirtIfEntry OBJECT-TYPE ++ SYNTAX OspfVirtIfEntry ++ MAX-ACCESS not-accessible ++ STATUS current ++ DESCRIPTION ++ "Information about a single Virtual Interface." ++ INDEX { ospfVirtIfAreaId, ospfVirtIfNeighbor } ++ ::= { ospfVirtIfTable 1 } ++ ++OspfVirtIfEntry ::= ++ SEQUENCE { ++ ospfVirtIfAreaId ++ AreaID, ++ ospfVirtIfNeighbor ++ RouterID, ++ ospfVirtIfTransitDelay ++ UpToMaxAge, ++ ospfVirtIfRetransInterval ++ UpToMaxAge, ++ ospfVirtIfHelloInterval ++ HelloRange, ++ ospfVirtIfRtrDeadInterval ++ PositiveInteger, ++ ospfVirtIfState ++ INTEGER, ++ ospfVirtIfEvents ++ Counter32, ++ ospfVirtIfAuthType ++ INTEGER, ++ ospfVirtIfAuthKey ++ OCTET STRING, ++ ospfVirtIfStatus ++ RowStatus ++ } ++ ++ ospfVirtIfAreaId OBJECT-TYPE ++ SYNTAX AreaID ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The Transit Area that the Virtual Link ++ traverses. By definition, this is not 0.0.0.0" ++ ::= { ospfVirtIfEntry 1 } ++ ++ ++ ospfVirtIfNeighbor OBJECT-TYPE ++ SYNTAX RouterID ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The Router ID of the Virtual Neighbor." ++ ::= { ospfVirtIfEntry 2 } ++ ++ ++ ospfVirtIfTransitDelay OBJECT-TYPE ++ SYNTAX UpToMaxAge ++ MAX-ACCESS read-create ++ STATUS current ++ DESCRIPTION ++ "The estimated number of seconds it takes to ++ transmit a link- state update packet over this ++ interface." ++ DEFVAL { 1 } ++ ::= { ospfVirtIfEntry 3 } ++ ++ ++ ospfVirtIfRetransInterval OBJECT-TYPE ++ SYNTAX UpToMaxAge ++ MAX-ACCESS read-create ++ STATUS current ++ DESCRIPTION ++ "The number of seconds between link-state ad- ++ vertisement retransmissions, for adjacencies ++ belonging to this interface. This value is ++ also used when retransmitting database descrip- ++ tion and link-state request packets. This ++ value should be well over the expected round- ++ trip time." ++ DEFVAL { 5 } ++ ::= { ospfVirtIfEntry 4 } ++ ++ ++ ospfVirtIfHelloInterval OBJECT-TYPE ++ SYNTAX HelloRange ++ MAX-ACCESS read-create ++ STATUS current ++ DESCRIPTION ++ "The length of time, in seconds, between the ++ Hello packets that the router sends on the in- ++ terface. This value must be the same for the ++ virtual neighbor." ++ DEFVAL { 10 } ++ ::= { ospfVirtIfEntry 5 } ++ ++ ++ ospfVirtIfRtrDeadInterval OBJECT-TYPE ++ SYNTAX PositiveInteger ++ MAX-ACCESS read-create ++ STATUS current ++ DESCRIPTION ++ "The number of seconds that a router's Hello ++ packets have not been seen before it's neigh- ++ bors declare the router down. This should be ++ some multiple of the Hello interval. This ++ value must be the same for the virtual neigh- ++ bor." ++ DEFVAL { 60 } ++ ::= { ospfVirtIfEntry 6 } ++ ++ ++ ospfVirtIfState OBJECT-TYPE ++ SYNTAX INTEGER { ++ down (1), -- these use the same encoding ++ pointToPoint (4) -- as the ospfIfTable ++ } ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "OSPF virtual interface states." ++ DEFVAL { down } ++ ::= { ospfVirtIfEntry 7 } ++ ++ ++ ospfVirtIfEvents OBJECT-TYPE ++ SYNTAX Counter32 ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The number of state changes or error events on ++ this Virtual Link" ++ ::= { ospfVirtIfEntry 8 } ++ ++ ++ ospfVirtIfAuthKey OBJECT-TYPE ++ SYNTAX OCTET STRING (SIZE(0..256)) ++ MAX-ACCESS read-create ++ STATUS current ++ DESCRIPTION ++ "If Authentication Type is simplePassword, the ++ device will left adjust and zero fill to 8 oc- ++ tets. ++ ++ Note that unauthenticated interfaces need no ++ authentication key, and simple password authen- ++ tication cannot use a key of more than 8 oc- ++ tets. Larger keys are useful only with authen- ++ tication mechanisms not specified in this docu- ++ ment. ++ ++ When read, ospfVifAuthKey always returns a ++ string of length zero." ++ REFERENCE ++ "OSPF Version 2, Section 9 The Interface Data ++ Structure" ++ DEFVAL { '0000000000000000'H } -- 0.0.0.0.0.0.0.0 ++ ::= { ospfVirtIfEntry 9 } ++ ++ ++ ospfVirtIfStatus OBJECT-TYPE ++ SYNTAX RowStatus ++ MAX-ACCESS read-create ++ STATUS current ++ DESCRIPTION ++ "This variable displays the status of the en- ++ try. Setting it to 'invalid' has the effect of ++ rendering it inoperative. The internal effect ++ (row removal) is implementation dependent." ++ ::= { ospfVirtIfEntry 10 } ++ ++ ++ ospfVirtIfAuthType OBJECT-TYPE ++ SYNTAX INTEGER (0..255) ++ -- none (0), ++ -- simplePassword (1) ++ -- md5 (2) ++ -- reserved for specification by IANA (> 2) ++ MAX-ACCESS read-create ++ STATUS current ++ DESCRIPTION ++ "The authentication type specified for a virtu- ++ al interface. Additional authentication types ++ may be assigned locally." ++ REFERENCE ++ "OSPF Version 2, Appendix E Authentication" ++ DEFVAL { 0 } -- no authentication, by default ++ ::= { ospfVirtIfEntry 11 } ++ ++ ++-- OSPF Neighbor Table ++ ++-- The OSPF Neighbor Table describes all neighbors in ++-- the locality of the subject router. ++ ++ ospfNbrTable OBJECT-TYPE ++ SYNTAX SEQUENCE OF OspfNbrEntry ++ MAX-ACCESS not-accessible ++ STATUS current ++ DESCRIPTION ++ "A table of non-virtual neighbor information." ++ REFERENCE ++ "OSPF Version 2, Section 10 The Neighbor Data ++ Structure" ++ ::= { ospf 10 } ++ ++ ++ ospfNbrEntry OBJECT-TYPE ++ SYNTAX OspfNbrEntry ++ MAX-ACCESS not-accessible ++ STATUS current ++ DESCRIPTION ++ "The information regarding a single neighbor." ++ REFERENCE ++ "OSPF Version 2, Section 10 The Neighbor Data ++ Structure" ++ INDEX { ospfNbrIpAddr, ospfNbrAddressLessIndex } ++ ::= { ospfNbrTable 1 } ++ ++OspfNbrEntry ::= ++ SEQUENCE { ++ ospfNbrIpAddr ++ IpAddress, ++ ospfNbrAddressLessIndex ++ InterfaceIndex, ++ ospfNbrRtrId ++ RouterID, ++ ospfNbrOptions ++ Integer32, ++ ospfNbrPriority ++ DesignatedRouterPriority, ++ ospfNbrState ++ INTEGER, ++ ospfNbrEvents ++ Counter32, ++ ospfNbrLsRetransQLen ++ Gauge32, ++ ospfNbmaNbrStatus ++ RowStatus, ++ ospfNbmaNbrPermanence ++ INTEGER, ++ ospfNbrHelloSuppressed ++ TruthValue ++ } ++ ++ ospfNbrIpAddr OBJECT-TYPE ++ SYNTAX IpAddress ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The IP address this neighbor is using in its ++ IP Source Address. Note that, on addressless ++ links, this will not be 0.0.0.0, but the ad- ++ dress of another of the neighbor's interfaces." ++ ::= { ospfNbrEntry 1 } ++ ++ ++ ospfNbrAddressLessIndex OBJECT-TYPE ++ SYNTAX InterfaceIndex ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "On an interface having an IP Address, zero. ++ On addressless interfaces, the corresponding ++ value of ifIndex in the Internet Standard MIB. ++ On row creation, this can be derived from the ++ instance." ++ ::= { ospfNbrEntry 2 } ++ ++ ++ ospfNbrRtrId OBJECT-TYPE ++ SYNTAX RouterID ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "A 32-bit integer (represented as a type IpAd- ++ dress) uniquely identifying the neighboring ++ router in the Autonomous System." ++ DEFVAL { '00000000'H } -- 0.0.0.0 ++ ::= { ospfNbrEntry 3 } ++ ++ ++ ospfNbrOptions OBJECT-TYPE ++ SYNTAX Integer32 ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "A Bit Mask corresponding to the neighbor's op- ++ tions field. ++ ++ Bit 0, if set, indicates that the system will ++ operate on Type of Service metrics other than ++ TOS 0. If zero, the neighbor will ignore all ++ metrics except the TOS 0 metric. ++ ++ Bit 1, if set, indicates that the associated ++ area accepts and operates on external informa- ++ tion; if zero, it is a stub area. ++ ++ Bit 2, if set, indicates that the system is ca- ++ pable of routing IP Multicast datagrams; i.e., ++ that it implements the Multicast Extensions to ++ OSPF. ++ ++ Bit 3, if set, indicates that the associated ++ area is an NSSA. These areas are capable of ++ carrying type 7 external advertisements, which ++ are translated into type 5 external advertise- ++ ments at NSSA borders." ++ REFERENCE ++ "OSPF Version 2, Section 12.1.2 Options" ++ DEFVAL { 0 } ++ ::= { ospfNbrEntry 4 } ++ ++ ++ ospfNbrPriority OBJECT-TYPE ++ SYNTAX DesignatedRouterPriority ++ MAX-ACCESS read-create ++ STATUS current ++ DESCRIPTION ++ "The priority of this neighbor in the designat- ++ ed router election algorithm. The value 0 sig- ++ nifies that the neighbor is not eligible to be- ++ come the designated router on this particular ++ network." ++ DEFVAL { 1 } ++ ::= { ospfNbrEntry 5 } ++ ++ ++ ospfNbrState OBJECT-TYPE ++ SYNTAX INTEGER { ++ down (1), ++ attempt (2), ++ init (3), ++ twoWay (4), ++ exchangeStart (5), ++ exchange (6), ++ loading (7), ++ full (8) ++ } ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The State of the relationship with this Neigh- ++ bor." ++ REFERENCE ++ "OSPF Version 2, Section 10.1 Neighbor States" ++ DEFVAL { down } ++ ::= { ospfNbrEntry 6 } ++ ++ ++ ospfNbrEvents OBJECT-TYPE ++ SYNTAX Counter32 ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The number of times this neighbor relationship ++ has changed state, or an error has occurred." ++ ::= { ospfNbrEntry 7 } ++ ++ ++ ospfNbrLsRetransQLen OBJECT-TYPE ++ SYNTAX Gauge32 ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The current length of the retransmission ++ queue." ++ ::= { ospfNbrEntry 8 } ++ ++ ++ ospfNbmaNbrStatus OBJECT-TYPE ++ SYNTAX RowStatus ++ MAX-ACCESS read-create ++ STATUS current ++ DESCRIPTION ++ "This variable displays the status of the en- ++ try. Setting it to 'invalid' has the effect of ++ rendering it inoperative. The internal effect ++ (row removal) is implementation dependent." ++ ::= { ospfNbrEntry 9 } ++ ++ ++ ospfNbmaNbrPermanence OBJECT-TYPE ++ SYNTAX INTEGER { ++ dynamic (1), -- learned through protocol ++ permanent (2) -- configured address ++ } ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "This variable displays the status of the en- ++ try. 'dynamic' and 'permanent' refer to how ++ the neighbor became known." ++ DEFVAL { permanent } ++ ::= { ospfNbrEntry 10 } ++ ++ ++ ospfNbrHelloSuppressed OBJECT-TYPE ++ SYNTAX TruthValue ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "Indicates whether Hellos are being suppressed ++ to the neighbor" ++ ::= { ospfNbrEntry 11 } ++ ++ ++-- OSPF Virtual Neighbor Table ++ ++-- This table describes all virtual neighbors. ++-- Since Virtual Links are configured in the ++-- virtual interface table, this table is read-only. ++ ++ ospfVirtNbrTable OBJECT-TYPE ++ SYNTAX SEQUENCE OF OspfVirtNbrEntry ++ MAX-ACCESS not-accessible ++ STATUS current ++ DESCRIPTION ++ "A table of virtual neighbor information." ++ REFERENCE ++ "OSPF Version 2, Section 15 Virtual Links" ++ ::= { ospf 11 } ++ ++ ++ ospfVirtNbrEntry OBJECT-TYPE ++ SYNTAX OspfVirtNbrEntry ++ MAX-ACCESS not-accessible ++ STATUS current ++ DESCRIPTION ++ "Virtual neighbor information." ++ INDEX { ospfVirtNbrArea, ospfVirtNbrRtrId } ++ ::= { ospfVirtNbrTable 1 } ++ ++OspfVirtNbrEntry ::= ++ SEQUENCE { ++ ospfVirtNbrArea ++ AreaID, ++ ospfVirtNbrRtrId ++ RouterID, ++ ospfVirtNbrIpAddr ++ IpAddress, ++ ospfVirtNbrOptions ++ Integer32, ++ ospfVirtNbrState ++ INTEGER, ++ ospfVirtNbrEvents ++ Counter32, ++ ospfVirtNbrLsRetransQLen ++ Gauge32, ++ ospfVirtNbrHelloSuppressed ++ TruthValue ++ } ++ ++ ospfVirtNbrArea OBJECT-TYPE ++ SYNTAX AreaID ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The Transit Area Identifier." ++ ::= { ospfVirtNbrEntry 1 } ++ ++ ++ ospfVirtNbrRtrId OBJECT-TYPE ++ SYNTAX RouterID ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "A 32-bit integer uniquely identifying the ++ neighboring router in the Autonomous System." ++ ::= { ospfVirtNbrEntry 2 } ++ ++ ++ ospfVirtNbrIpAddr OBJECT-TYPE ++ SYNTAX IpAddress ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The IP address this Virtual Neighbor is us- ++ ing." ++ ::= { ospfVirtNbrEntry 3 } ++ ++ ++ ospfVirtNbrOptions OBJECT-TYPE ++ SYNTAX Integer32 ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "A Bit Mask corresponding to the neighbor's op- ++ tions field. ++ ++ Bit 1, if set, indicates that the system will ++ operate on Type of Service metrics other than ++ TOS 0. If zero, the neighbor will ignore all ++ metrics except the TOS 0 metric. ++ ++ Bit 2, if set, indicates that the system is ++ Network Multicast capable; ie, that it imple- ++ ments OSPF Multicast Routing." ++ ::= { ospfVirtNbrEntry 4 } ++ ospfVirtNbrState OBJECT-TYPE ++ SYNTAX INTEGER { ++ down (1), ++ attempt (2), ++ init (3), ++ twoWay (4), ++ exchangeStart (5), ++ exchange (6), ++ loading (7), ++ full (8) ++ } ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The state of the Virtual Neighbor Relation- ++ ship." ++ ::= { ospfVirtNbrEntry 5 } ++ ++ ++ ospfVirtNbrEvents OBJECT-TYPE ++ SYNTAX Counter32 ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The number of times this virtual link has ++ changed its state, or an error has occurred." ++ ::= { ospfVirtNbrEntry 6 } ++ ++ ++ ospfVirtNbrLsRetransQLen OBJECT-TYPE ++ SYNTAX Gauge32 ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The current length of the retransmission ++ queue." ++ ::= { ospfVirtNbrEntry 7 } ++ ++ ++ ospfVirtNbrHelloSuppressed OBJECT-TYPE ++ SYNTAX TruthValue ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "Indicates whether Hellos are being suppressed ++ to the neighbor" ++ ::= { ospfVirtNbrEntry 8 } ++ ++-- OSPF Link State Database, External ++ ++-- The Link State Database contains the Link State ++-- Advertisements from throughout the areas that the ++-- device is attached to. ++ ++-- This table is identical to the OSPF LSDB Table in ++-- format, but contains only External Link State ++-- Advertisements. The purpose is to allow external ++-- LSAs to be displayed once for the router rather ++-- than once in each non-stub area. ++ ++ ospfExtLsdbTable OBJECT-TYPE ++ SYNTAX SEQUENCE OF OspfExtLsdbEntry ++ MAX-ACCESS not-accessible ++ STATUS current ++ DESCRIPTION ++ "The OSPF Process's Links State Database." ++ REFERENCE ++ "OSPF Version 2, Section 12 Link State Adver- ++ tisements" ++ ::= { ospf 12 } ++ ++ ++ ospfExtLsdbEntry OBJECT-TYPE ++ SYNTAX OspfExtLsdbEntry ++ MAX-ACCESS not-accessible ++ STATUS current ++ DESCRIPTION ++ "A single Link State Advertisement." ++ INDEX { ospfExtLsdbType, ospfExtLsdbLsid, ospfExtLsdbRouterId } ++ ::= { ospfExtLsdbTable 1 } ++ ++OspfExtLsdbEntry ::= ++ SEQUENCE { ++ ospfExtLsdbType ++ INTEGER, ++ ospfExtLsdbLsid ++ IpAddress, ++ ospfExtLsdbRouterId ++ RouterID, ++ ospfExtLsdbSequence ++ Integer32, ++ ospfExtLsdbAge ++ Integer32, ++ ospfExtLsdbChecksum ++ Integer32, ++ ospfExtLsdbAdvertisement ++ OCTET STRING ++ } ++ ++ ospfExtLsdbType OBJECT-TYPE ++ SYNTAX INTEGER { ++ asExternalLink (5) ++ } ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The type of the link state advertisement. ++ Each link state type has a separate advertise- ++ ment format." ++ REFERENCE ++ "OSPF Version 2, Appendix A.4.1 The Link State ++ Advertisement header" ++ ::= { ospfExtLsdbEntry 1 } ++ ++ ++ ospfExtLsdbLsid OBJECT-TYPE ++ SYNTAX IpAddress ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The Link State ID is an LS Type Specific field ++ containing either a Router ID or an IP Address; ++ it identifies the piece of the routing domain ++ that is being described by the advertisement." ++ REFERENCE ++ "OSPF Version 2, Section 12.1.4 Link State ID" ++ ::= { ospfExtLsdbEntry 2 } ++ ++ ++ ospfExtLsdbRouterId OBJECT-TYPE ++ SYNTAX RouterID ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The 32 bit number that uniquely identifies the ++ originating router in the Autonomous System." ++ REFERENCE ++ "OSPF Version 2, Appendix C.1 Global parameters" ++ ::= { ospfExtLsdbEntry 3 } ++ ++-- Note that the OSPF Sequence Number is a 32 bit signed ++-- integer. It starts with the value '80000001'h, ++-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h ++-- Thus, a typical sequence number will be very negative. ++ ospfExtLsdbSequence OBJECT-TYPE ++ SYNTAX Integer32 ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The sequence number field is a signed 32-bit ++ integer. It is used to detect old and dupli- ++ cate link state advertisements. The space of ++ sequence numbers is linearly ordered. The ++ larger the sequence number the more recent the ++ advertisement." ++ REFERENCE ++ "OSPF Version 2, Section 12.1.6 LS sequence ++ number" ++ ::= { ospfExtLsdbEntry 4 } ++ ++ ++ ospfExtLsdbAge OBJECT-TYPE ++ SYNTAX Integer32 -- Should be 0..MaxAge ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "This field is the age of the link state adver- ++ tisement in seconds." ++ REFERENCE ++ "OSPF Version 2, Section 12.1.1 LS age" ++ ::= { ospfExtLsdbEntry 5 } ++ ++ ++ ospfExtLsdbChecksum OBJECT-TYPE ++ SYNTAX Integer32 ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "This field is the checksum of the complete ++ contents of the advertisement, excepting the ++ age field. The age field is excepted so that ++ an advertisement's age can be incremented ++ without updating the checksum. The checksum ++ used is the same that is used for ISO connec- ++ tionless datagrams; it is commonly referred to ++ as the Fletcher checksum." ++ REFERENCE ++ "OSPF Version 2, Section 12.1.7 LS checksum" ++ ::= { ospfExtLsdbEntry 6 } ++ ++ ++ ospfExtLsdbAdvertisement OBJECT-TYPE ++ SYNTAX OCTET STRING (SIZE(36)) ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The entire Link State Advertisement, including ++ its header." ++ REFERENCE ++ "OSPF Version 2, Section 12 Link State Adver- ++ tisements" ++ ::= { ospfExtLsdbEntry 7 } ++ ++ ++-- OSPF Use of the CIDR Route Table ++ ++ospfRouteGroup OBJECT IDENTIFIER ::= { ospf 13 } ++ ++-- The IP Forwarding Table defines a number of objects for use by ++-- the routing protocol to externalize its information. Most of ++-- the variables (ipForwardDest, ipForwardMask, ipForwardPolicy, ++-- ipForwardNextHop, ipForwardIfIndex, ipForwardType, ++-- ipForwardProto, ipForwardAge, and ipForwardNextHopAS) are ++-- defined there. ++ ++-- Those that leave some discretion are defined here. ++ ++-- ipCidrRouteProto is, of course, ospf (13). ++ ++-- ipCidrRouteAge is the time since the route was first calculated, ++-- as opposed to the time since the last SPF run. ++ ++-- ipCidrRouteInfo is an OBJECT IDENTIFIER for use by the routing ++-- protocol. The following values shall be found there depending ++-- on the way the route was calculated. ++ ++ospfIntraArea OBJECT IDENTIFIER ::= { ospfRouteGroup 1 } ++ospfInterArea OBJECT IDENTIFIER ::= { ospfRouteGroup 2 } ++ospfExternalType1 OBJECT IDENTIFIER ::= { ospfRouteGroup 3 } ++ospfExternalType2 OBJECT IDENTIFIER ::= { ospfRouteGroup 4 } ++ ++-- ipCidrRouteMetric1 is, by definition, the primary routing ++-- metric. Therefore, it should be the metric that route ++-- selection is based on. For intra-area and inter-area routes, ++-- it is an OSPF metric. For External Type 1 (comparable value) ++-- routes, it is an OSPF metric plus the External Metric. For ++-- external Type 2 (non-comparable value) routes, it is the ++-- external metric. ++ ++-- ipCidrRouteMetric2 is, by definition, a secondary routing ++-- metric. Therefore, it should be the metric that breaks a tie ++-- among routes having equal metric1 values and the same ++-- calculation rule. For intra-area, inter-area routes, and ++-- External Type 1 (comparable value) routes, it is unused. For ++-- external Type 2 (non-comparable value) routes, it is the metric ++-- to the AS border router. ++ ++-- ipCidrRouteMetric3, ipCidrRouteMetric4, and ipCidrRouteMetric5 are ++-- unused. ++ ++-- ++-- The OSPF Area Aggregate Table ++-- ++-- This table replaces the OSPF Area Summary Table, being an ++-- extension of that for CIDR routers. ++ ++ ospfAreaAggregateTable OBJECT-TYPE ++ SYNTAX SEQUENCE OF OspfAreaAggregateEntry ++ MAX-ACCESS not-accessible ++ STATUS current ++ DESCRIPTION ++ "A range of IP addresses specified by an IP ++ address/IP network mask pair. For example, ++ class B address range of X.X.X.X with a network ++ mask of 255.255.0.0 includes all IP addresses ++ from X.X.0.0 to X.X.255.255. Note that if ++ ranges are configured such that one range sub- ++ sumes another range (e.g., 10.0.0.0 mask ++ 255.0.0.0 and 10.1.0.0 mask 255.255.0.0), the ++ most specific match is the preferred one." ++ REFERENCE ++ "OSPF Version 2, Appendix C.2 Area parameters" ++ ::= { ospf 14 } ++ ++ ++ ospfAreaAggregateEntry OBJECT-TYPE ++ SYNTAX OspfAreaAggregateEntry ++ MAX-ACCESS not-accessible ++ STATUS current ++ DESCRIPTION ++ "A range of IP addresses specified by an IP ++ address/IP network mask pair. For example, ++ class B address range of X.X.X.X with a network ++ mask of 255.255.0.0 includes all IP addresses ++ from X.X.0.0 to X.X.255.255. Note that if ++ ranges are range configured such that one range ++ subsumes another range (e.g., 10.0.0.0 mask ++ 255.0.0.0 and 10.1.0.0 mask 255.255.0.0), the ++ most specific match is the preferred one." ++ REFERENCE ++ "OSPF Version 2, Appendix C.2 Area parameters" ++ INDEX { ospfAreaAggregateAreaID, ospfAreaAggregateLsdbType, ++ ospfAreaAggregateNet, ospfAreaAggregateMask } ++ ::= { ospfAreaAggregateTable 1 } ++ ++ ++OspfAreaAggregateEntry ::= ++ SEQUENCE { ++ ospfAreaAggregateAreaID ++ AreaID, ++ ospfAreaAggregateLsdbType ++ INTEGER, ++ ospfAreaAggregateNet ++ IpAddress, ++ ospfAreaAggregateMask ++ IpAddress, ++ ospfAreaAggregateStatus ++ RowStatus, ++ ospfAreaAggregateEffect ++ INTEGER ++ } ++ ++ ospfAreaAggregateAreaID OBJECT-TYPE ++ SYNTAX AreaID ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The Area the Address Aggregate is to be found ++ within." ++ REFERENCE ++ "OSPF Version 2, Appendix C.2 Area parameters" ++ ::= { ospfAreaAggregateEntry 1 } ++ ++ ++ ospfAreaAggregateLsdbType OBJECT-TYPE ++ SYNTAX INTEGER { ++ summaryLink (3), ++ nssaExternalLink (7) ++ } ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The type of the Address Aggregate. This field ++ specifies the Lsdb type that this Address Ag- ++ gregate applies to." ++ REFERENCE ++ "OSPF Version 2, Appendix A.4.1 The Link State ++ Advertisement header" ++ ::= { ospfAreaAggregateEntry 2 } ++ ++ ++ ospfAreaAggregateNet OBJECT-TYPE ++ SYNTAX IpAddress ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The IP Address of the Net or Subnet indicated ++ by the range." ++ REFERENCE ++ "OSPF Version 2, Appendix C.2 Area parameters" ++ ::= { ospfAreaAggregateEntry 3 } ++ ++ ++ ospfAreaAggregateMask OBJECT-TYPE ++ SYNTAX IpAddress ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The Subnet Mask that pertains to the Net or ++ Subnet." ++ REFERENCE ++ "OSPF Version 2, Appendix C.2 Area parameters" ++ ::= { ospfAreaAggregateEntry 4 } ++ ++ ++ ospfAreaAggregateStatus OBJECT-TYPE ++ SYNTAX RowStatus ++ MAX-ACCESS read-create ++ STATUS current ++ DESCRIPTION ++ "This variable displays the status of the en- ++ try. Setting it to 'invalid' has the effect of ++ rendering it inoperative. The internal effect ++ (row removal) is implementation dependent." ++ ::= { ospfAreaAggregateEntry 5 } ++ ++ ++ ospfAreaAggregateEffect OBJECT-TYPE ++ SYNTAX INTEGER { ++ advertiseMatching (1), ++ doNotAdvertiseMatching (2) ++ } ++ MAX-ACCESS read-create ++ STATUS current ++ DESCRIPTION ++ "Subnets subsumed by ranges either trigger the ++ advertisement of the indicated aggregate (ad- ++ vertiseMatching), or result in the subnet's not ++ being advertised at all outside the area." ++ DEFVAL { advertiseMatching } ++ ::= { ospfAreaAggregateEntry 6 } ++ ++ ++-- conformance information ++ ++ospfConformance OBJECT IDENTIFIER ::= { ospf 15 } ++ ++ospfGroups OBJECT IDENTIFIER ::= { ospfConformance 1 } ++ospfCompliances OBJECT IDENTIFIER ::= { ospfConformance 2 } ++ ++-- compliance statements ++ ++ ospfCompliance MODULE-COMPLIANCE ++ STATUS current ++ DESCRIPTION ++ "The compliance statement " ++ MODULE -- this module ++ MANDATORY-GROUPS { ++ ospfBasicGroup, ++ ospfAreaGroup, ++ ospfStubAreaGroup, ++ ospfIfGroup, ++ ospfIfMetricGroup, ++ ospfVirtIfGroup, ++ ospfNbrGroup, ++ ospfVirtNbrGroup, ++ ospfAreaAggregateGroup ++ } ++ ::= { ospfCompliances 1 } ++ ++ ++-- units of conformance ++ ++ ospfBasicGroup OBJECT-GROUP ++ OBJECTS { ++ ospfRouterId, ++ ospfAdminStat, ++ ospfVersionNumber, ++ ospfAreaBdrRtrStatus, ++ ospfASBdrRtrStatus, ++ ospfExternLsaCount, ++ ospfExternLsaCksumSum, ++ ospfTOSSupport, ++ ospfOriginateNewLsas, ++ ospfRxNewLsas, ++ ospfExtLsdbLimit, ++ ospfMulticastExtensions, ++ ospfExitOverflowInterval, ++ ospfDemandExtensions ++ } ++ STATUS current ++ DESCRIPTION ++ "These objects are required for OSPF systems." ++ ::= { ospfGroups 1 } ++ ++ ++ ospfAreaGroup OBJECT-GROUP ++ OBJECTS { ++ ospfAreaId, ++ ospfImportAsExtern, ++ ospfSpfRuns, ++ ospfAreaBdrRtrCount, ++ ospfAsBdrRtrCount, ++ ospfAreaLsaCount, ++ ospfAreaLsaCksumSum, ++ ospfAreaSummary, ++ ospfAreaStatus ++ } ++ STATUS current ++ DESCRIPTION ++ "These objects are required for OSPF systems ++ supporting areas." ++ ::= { ospfGroups 2 } ++ ++ ++ ospfStubAreaGroup OBJECT-GROUP ++ OBJECTS { ++ ospfStubAreaId, ++ ospfStubTOS, ++ ospfStubMetric, ++ ospfStubStatus, ++ ospfStubMetricType ++ } ++ STATUS current ++ DESCRIPTION ++ "These objects are required for OSPF systems ++ supporting stub areas." ++ ::= { ospfGroups 3 } ++ ++ ++ ospfLsdbGroup OBJECT-GROUP ++ OBJECTS { ++ ospfLsdbAreaId, ++ ospfLsdbType, ++ ospfLsdbLsid, ++ ospfLsdbRouterId, ++ ospfLsdbSequence, ++ ospfLsdbAge, ++ ospfLsdbChecksum, ++ ospfLsdbAdvertisement ++ } ++ STATUS current ++ DESCRIPTION ++ "These objects are required for OSPF systems ++ that display their link state database." ++ ::= { ospfGroups 4 } ++ ++ ++ ospfAreaRangeGroup OBJECT-GROUP ++ OBJECTS { ++ ospfAreaRangeAreaId, ++ ospfAreaRangeNet, ++ ospfAreaRangeMask, ++ ospfAreaRangeStatus, ++ ospfAreaRangeEffect ++ } ++ STATUS obsolete ++ DESCRIPTION ++ "These objects are required for non-CIDR OSPF ++ systems that support multiple areas." ++ ::= { ospfGroups 5 } ++ ++ ++ ospfHostGroup OBJECT-GROUP ++ OBJECTS { ++ ospfHostIpAddress, ++ ospfHostTOS, ++ ospfHostMetric, ++ ospfHostStatus, ++ ospfHostAreaID ++ } ++ STATUS current ++ DESCRIPTION ++ "These objects are required for OSPF systems ++ that support attached hosts." ++ ::= { ospfGroups 6 } ++ ++ ++ ospfIfGroup OBJECT-GROUP ++ OBJECTS { ++ ospfIfIpAddress, ++ ospfAddressLessIf, ++ ospfIfAreaId, ++ ospfIfType, ++ ospfIfAdminStat, ++ ospfIfRtrPriority, ++ ospfIfTransitDelay, ++ ospfIfRetransInterval, ++ ospfIfHelloInterval, ++ ospfIfRtrDeadInterval, ++ ospfIfPollInterval, ++ ospfIfState, ++ ospfIfDesignatedRouter, ++ ospfIfBackupDesignatedRouter, ++ ospfIfEvents, ++ ospfIfAuthType, ++ ospfIfAuthKey, ++ ospfIfStatus, ++ ospfIfMulticastForwarding, ++ ospfIfDemand ++ } ++ STATUS current ++ DESCRIPTION ++ "These objects are required for OSPF systems." ++ ::= { ospfGroups 7 } ++ ++ ++ ospfIfMetricGroup OBJECT-GROUP ++ OBJECTS { ++ ospfIfMetricIpAddress, ++ ospfIfMetricAddressLessIf, ++ ospfIfMetricTOS, ++ ospfIfMetricValue, ++ ospfIfMetricStatus ++ } ++ STATUS current ++ DESCRIPTION ++ "These objects are required for OSPF systems." ++ ::= { ospfGroups 8 } ++ ++ ++ ospfVirtIfGroup OBJECT-GROUP ++ OBJECTS { ++ ospfVirtIfAreaId, ++ ospfVirtIfNeighbor, ++ ospfVirtIfTransitDelay, ++ ospfVirtIfRetransInterval, ++ ospfVirtIfHelloInterval, ++ ospfVirtIfRtrDeadInterval, ++ ospfVirtIfState, ++ ospfVirtIfEvents, ++ ospfVirtIfAuthType, ++ ospfVirtIfAuthKey, ++ ospfVirtIfStatus ++ } ++ STATUS current ++ DESCRIPTION ++ "These objects are required for OSPF systems." ++ ::= { ospfGroups 9 } ++ ++ ++ ospfNbrGroup OBJECT-GROUP ++ OBJECTS { ++ ospfNbrIpAddr, ++ ospfNbrAddressLessIndex, ++ ospfNbrRtrId, ++ ospfNbrOptions, ++ ospfNbrPriority, ++ ospfNbrState, ++ ospfNbrEvents, ++ ospfNbrLsRetransQLen, ++ ospfNbmaNbrStatus, ++ ospfNbmaNbrPermanence, ++ ospfNbrHelloSuppressed ++ } ++ STATUS current ++ DESCRIPTION ++ "These objects are required for OSPF systems." ++ ::= { ospfGroups 10 } ++ ++ ++ ospfVirtNbrGroup OBJECT-GROUP ++ OBJECTS { ++ ospfVirtNbrArea, ++ ospfVirtNbrRtrId, ++ ospfVirtNbrIpAddr, ++ ospfVirtNbrOptions, ++ ospfVirtNbrState, ++ ospfVirtNbrEvents, ++ ospfVirtNbrLsRetransQLen, ++ ospfVirtNbrHelloSuppressed ++ } ++ STATUS current ++ DESCRIPTION ++ "These objects are required for OSPF systems." ++ ::= { ospfGroups 11 } ++ ++ ++ ospfExtLsdbGroup OBJECT-GROUP ++ OBJECTS { ++ ospfExtLsdbType, ++ ospfExtLsdbLsid, ++ ospfExtLsdbRouterId, ++ ospfExtLsdbSequence, ++ ospfExtLsdbAge, ++ ospfExtLsdbChecksum, ++ ospfExtLsdbAdvertisement ++ } ++ STATUS current ++ DESCRIPTION ++ "These objects are required for OSPF systems ++ that display their link state database." ++ ::= { ospfGroups 12 } ++ ++ ++ ospfAreaAggregateGroup OBJECT-GROUP ++ OBJECTS { ++ ospfAreaAggregateAreaID, ++ ospfAreaAggregateLsdbType, ++ ospfAreaAggregateNet, ++ ospfAreaAggregateMask, ++ ospfAreaAggregateStatus, ++ ospfAreaAggregateEffect ++ } ++ STATUS current ++ DESCRIPTION ++ "These objects are required for OSPF systems." ++ ::= { ospfGroups 13 } ++ ++END +diff -ruN net-snmp-5.1.2-orig/mibs/OSPF-TRAP-MIB.txt net-snmp-5.1.2-5/mibs/OSPF-TRAP-MIB.txt +--- net-snmp-5.1.2-orig/mibs/OSPF-TRAP-MIB.txt 1970-01-01 01:00:00.000000000 +0100 ++++ net-snmp-5.1.2-5/mibs/OSPF-TRAP-MIB.txt 2005-03-13 16:17:21.000000000 +0100 +@@ -0,0 +1,443 @@ ++OSPF-TRAP-MIB DEFINITIONS ::= BEGIN ++ ++ IMPORTS ++ MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress ++ FROM SNMPv2-SMI ++ MODULE-COMPLIANCE, OBJECT-GROUP ++ FROM SNMPv2-CONF ++ ospfRouterId, ospfIfIpAddress, ospfAddressLessIf, ospfIfState, ++ ospfVirtIfAreaId, ospfVirtIfNeighbor, ospfVirtIfState, ++ ospfNbrIpAddr, ospfNbrAddressLessIndex, ospfNbrRtrId, ++ ospfNbrState, ospfVirtNbrArea, ospfVirtNbrRtrId, ospfVirtNbrState, ++ ospfLsdbType, ospfLsdbLsid, ospfLsdbRouterId, ospfLsdbAreaId, ++ ospfExtLsdbLimit, ospf ++ FROM OSPF-MIB; ++ ++ ospfTrap MODULE-IDENTITY ++ LAST-UPDATED "9501201225Z" -- Fri Jan 20 12:25:50 PST 1995 ++ ORGANIZATION "IETF OSPF Working Group" ++ CONTACT-INFO ++ " Fred Baker ++ Postal: Cisco Systems ++ 519 Lado Drive ++ Santa Barbara, California 93111 ++ Tel: +1 805 681 0115 ++ E-Mail: fred@cisco.com ++ ++ Rob Coltun ++ Postal: RainbowBridge Communications ++ Tel: (301) 340-9416 ++ E-Mail: rcoltun@rainbow-bridge.com" ++ DESCRIPTION ++ "The MIB module to describe traps for the OSPF ++ Version 2 Protocol." ++ ::= { ospf 16 } ++ ++-- Trap Support Objects ++ ++-- The following are support objects for the OSPF traps. ++ ++ospfTrapControl OBJECT IDENTIFIER ::= { ospfTrap 1 } ++ospfTraps OBJECT IDENTIFIER ::= { ospfTrap 2 } ++ ++ ospfSetTrap OBJECT-TYPE ++ SYNTAX OCTET STRING (SIZE(4)) ++ MAX-ACCESS read-write ++ STATUS current ++ DESCRIPTION ++ "A four-octet string serving as a bit map for ++ the trap events defined by the OSPF traps. This ++ object is used to enable and disable specific ++ OSPF traps where a 1 in the bit field ++ represents enabled. The right-most bit (least ++ significant) represents trap 0." ++ ::= { ospfTrapControl 1 } ++ ++ ++ ospfConfigErrorType OBJECT-TYPE ++ SYNTAX INTEGER { ++ badVersion (1), ++ areaMismatch (2), ++ unknownNbmaNbr (3), -- Router is Dr eligible ++ unknownVirtualNbr (4), ++ authTypeMismatch(5), ++ authFailure (6), ++ netMaskMismatch (7), ++ helloIntervalMismatch (8), ++ deadIntervalMismatch (9), ++ optionMismatch (10) } ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "Potential types of configuration conflicts. ++ Used by the ospfConfigError and ospfConfigVir- ++ tError traps." ++ ::= { ospfTrapControl 2 } ++ ++ ++ ospfPacketType OBJECT-TYPE ++ SYNTAX INTEGER { ++ hello (1), ++ dbDescript (2), ++ lsReq (3), ++ lsUpdate (4), ++ lsAck (5) } ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "OSPF packet types." ++ ::= { ospfTrapControl 3 } ++ ++ ++ ospfPacketSrc OBJECT-TYPE ++ SYNTAX IpAddress ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The IP address of an inbound packet that can- ++ not be identified by a neighbor instance." ++ ::= { ospfTrapControl 4 } ++ ++ ++-- Traps ++ ++ ++ ospfIfStateChange NOTIFICATION-TYPE ++ OBJECTS { ++ ospfRouterId, -- The originator of the trap ++ ospfIfIpAddress, ++ ospfAddressLessIf, ++ ospfIfState -- The new state ++ } ++ STATUS current ++ DESCRIPTION ++ "An ospfIfStateChange trap signifies that there ++ has been a change in the state of a non-virtual ++ OSPF interface. This trap should be generated ++ when the interface state regresses (e.g., goes ++ from Dr to Down) or progresses to a terminal ++ state (i.e., Point-to-Point, DR Other, Dr, or ++ Backup)." ++ ::= { ospfTraps 16 } ++ ++ ++ ospfVirtIfStateChange NOTIFICATION-TYPE ++ OBJECTS { ++ ospfRouterId, -- The originator of the trap ++ ospfVirtIfAreaId, ++ ospfVirtIfNeighbor, ++ ospfVirtIfState -- The new state ++ } ++ STATUS current ++ DESCRIPTION ++ "An ospfIfStateChange trap signifies that there ++ has been a change in the state of an OSPF vir- ++ tual interface. ++ This trap should be generated when the inter- ++ face state regresses (e.g., goes from Point- ++ to-Point to Down) or progresses to a terminal ++ state (i.e., Point-to-Point)." ++ ::= { ospfTraps 1 } ++ ++ ++ ospfNbrStateChange NOTIFICATION-TYPE ++ OBJECTS { ++ ospfRouterId, -- The originator of the trap ++ ospfNbrIpAddr, ++ ospfNbrAddressLessIndex, ++ ospfNbrRtrId, ++ ospfNbrState -- The new state ++ } ++ STATUS current ++ DESCRIPTION ++ "An ospfNbrStateChange trap signifies that ++ there has been a change in the state of a non- ++ virtual OSPF neighbor. This trap should be ++ generated when the neighbor state regresses ++ (e.g., goes from Attempt or Full to 1-Way or ++ Down) or progresses to a terminal state (e.g., ++ 2-Way or Full). When an neighbor transitions ++ from or to Full on non-broadcast multi-access ++ and broadcast networks, the trap should be gen- ++ erated by the designated router. A designated ++ router transitioning to Down will be noted by ++ ospfIfStateChange." ++ ::= { ospfTraps 2 } ++ ++ ++ ospfVirtNbrStateChange NOTIFICATION-TYPE ++ OBJECTS { ++ ospfRouterId, -- The originator of the trap ++ ospfVirtNbrArea, ++ ospfVirtNbrRtrId, ++ ospfVirtNbrState -- The new state ++ } ++ STATUS current ++ DESCRIPTION ++ "An ospfIfStateChange trap signifies that there ++ has been a change in the state of an OSPF vir- ++ tual neighbor. This trap should be generated ++ when the neighbor state regresses (e.g., goes ++ from Attempt or Full to 1-Way or Down) or ++ progresses to a terminal state (e.g., Full)." ++ ::= { ospfTraps 3 } ++ ospfIfConfigError NOTIFICATION-TYPE ++ OBJECTS { ++ ospfRouterId, -- The originator of the trap ++ ospfIfIpAddress, ++ ospfAddressLessIf, ++ ospfPacketSrc, -- The source IP address ++ ospfConfigErrorType, -- Type of error ++ ospfPacketType ++ } ++ STATUS current ++ DESCRIPTION ++ "An ospfIfConfigError trap signifies that a ++ packet has been received on a non-virtual in- ++ terface from a router whose configuration ++ parameters conflict with this router's confi- ++ guration parameters. Note that the event op- ++ tionMismatch should cause a trap only if it ++ prevents an adjacency from forming." ++ ::= { ospfTraps 4 } ++ ++ ++ ospfVirtIfConfigError NOTIFICATION-TYPE ++ OBJECTS { ++ ospfRouterId, -- The originator of the trap ++ ospfVirtIfAreaId, ++ ospfVirtIfNeighbor, ++ ospfConfigErrorType, -- Type of error ++ ospfPacketType ++ } ++ STATUS current ++ DESCRIPTION ++ "An ospfConfigError trap signifies that a pack- ++ et has been received on a virtual interface ++ from a router whose configuration parameters ++ conflict with this router's configuration ++ parameters. Note that the event optionMismatch ++ should cause a trap only if it prevents an ad- ++ jacency from forming." ++ ::= { ospfTraps 5 } ++ ++ ++ ospfIfAuthFailure NOTIFICATION-TYPE ++ OBJECTS { ++ ospfRouterId, -- The originator of the trap ++ ospfIfIpAddress, ++ ospfAddressLessIf, ++ ospfPacketSrc, -- The source IP address ++ ospfConfigErrorType, -- authTypeMismatch or ++ -- authFailure ++ ospfPacketType ++ } ++ STATUS current ++ DESCRIPTION ++ "An ospfIfAuthFailure trap signifies that a ++ packet has been received on a non-virtual in- ++ terface from a router whose authentication key ++ or authentication type conflicts with this ++ router's authentication key or authentication ++ type." ++ ::= { ospfTraps 6 } ++ ++ ++ ospfVirtIfAuthFailure NOTIFICATION-TYPE ++ OBJECTS { ++ ospfRouterId, -- The originator of the trap ++ ospfVirtIfAreaId, ++ ospfVirtIfNeighbor, ++ ospfConfigErrorType, -- authTypeMismatch or ++ -- authFailure ++ ospfPacketType ++ } ++ STATUS current ++ DESCRIPTION ++ "An ospfVirtIfAuthFailure trap signifies that a ++ packet has been received on a virtual interface ++ from a router whose authentication key or au- ++ thentication type conflicts with this router's ++ authentication key or authentication type." ++ ::= { ospfTraps 7 } ++ ++ ++ ospfIfRxBadPacket NOTIFICATION-TYPE ++ OBJECTS { ++ ospfRouterId, -- The originator of the trap ++ ospfIfIpAddress, ++ ospfAddressLessIf, ++ ospfPacketSrc, -- The source IP address ++ ospfPacketType ++ } ++ STATUS current ++ DESCRIPTION ++ "An ospfIfRxBadPacket trap signifies that an ++ OSPF packet has been received on a non-virtual ++ interface that cannot be parsed." ++ ::= { ospfTraps 8 } ++ ++ ospfVirtIfRxBadPacket NOTIFICATION-TYPE ++ OBJECTS { ++ ospfRouterId, -- The originator of the trap ++ ospfVirtIfAreaId, ++ ospfVirtIfNeighbor, ++ ospfPacketType ++ } ++ STATUS current ++ DESCRIPTION ++ "An ospfRxBadPacket trap signifies that an OSPF ++ packet has been received on a virtual interface ++ that cannot be parsed." ++ ::= { ospfTraps 9 } ++ ++ ++ ospfTxRetransmit NOTIFICATION-TYPE ++ OBJECTS { ++ ospfRouterId, -- The originator of the trap ++ ospfIfIpAddress, ++ ospfAddressLessIf, ++ ospfNbrRtrId, -- Destination ++ ospfPacketType, ++ ospfLsdbType, ++ ospfLsdbLsid, ++ ospfLsdbRouterId ++ } ++ STATUS current ++ DESCRIPTION ++ "An ospfTxRetransmit trap signifies than an ++ OSPF packet has been retransmitted on a non- ++ virtual interface. All packets that may be re- ++ transmitted are associated with an LSDB entry. ++ The LS type, LS ID, and Router ID are used to ++ identify the LSDB entry." ++ ::= { ospfTraps 10 } ++ ++ ++ ospfVirtIfTxRetransmit NOTIFICATION-TYPE ++ OBJECTS { ++ ospfRouterId, -- The originator of the trap ++ ospfVirtIfAreaId, ++ ospfVirtIfNeighbor, ++ ospfPacketType, ++ ospfLsdbType, ++ ospfLsdbLsid, ++ ospfLsdbRouterId ++ } ++ STATUS current ++ DESCRIPTION ++ "An ospfTxRetransmit trap signifies than an ++ OSPF packet has been retransmitted on a virtual ++ interface. All packets that may be retransmit- ++ ted are associated with an LSDB entry. The LS ++ type, LS ID, and Router ID are used to identify ++ the LSDB entry." ++ ::= { ospfTraps 11 } ++ ++ ++ ospfOriginateLsa NOTIFICATION-TYPE ++ OBJECTS { ++ ospfRouterId, -- The originator of the trap ++ ospfLsdbAreaId, -- 0.0.0.0 for AS Externals ++ ospfLsdbType, ++ ospfLsdbLsid, ++ ospfLsdbRouterId ++ } ++ STATUS current ++ DESCRIPTION ++ "An ospfOriginateLsa trap signifies that a new ++ LSA has been originated by this router. This ++ trap should not be invoked for simple refreshes ++ of LSAs (which happesn every 30 minutes), but ++ instead will only be invoked when an LSA is ++ (re)originated due to a topology change. Addi- ++ tionally, this trap does not include LSAs that ++ are being flushed because they have reached ++ MaxAge." ++ ::= { ospfTraps 12 } ++ ++ ++ ospfMaxAgeLsa NOTIFICATION-TYPE ++ OBJECTS { ++ ospfRouterId, -- The originator of the trap ++ ospfLsdbAreaId, -- 0.0.0.0 for AS Externals ++ ospfLsdbType, ++ ospfLsdbLsid, ++ ospfLsdbRouterId ++ } ++ STATUS current ++ DESCRIPTION ++ "An ospfMaxAgeLsa trap signifies that one of ++ the LSA in the router's link-state database has ++ aged to MaxAge." ++ ::= { ospfTraps 13 } ++ ++ ++ ospfLsdbOverflow NOTIFICATION-TYPE ++ OBJECTS { ++ ospfRouterId, -- The originator of the trap ++ ospfExtLsdbLimit ++ } ++ STATUS current ++ DESCRIPTION ++ "An ospfLsdbOverflow trap signifies that the ++ number of LSAs in the router's link-state data- ++ base has exceeded ospfExtLsdbLimit." ++ ::= { ospfTraps 14 } ++ ++ ++ ospfLsdbApproachingOverflow NOTIFICATION-TYPE ++ OBJECTS { ++ ospfRouterId, -- The originator of the trap ++ ospfExtLsdbLimit ++ } ++ STATUS current ++ DESCRIPTION ++ "An ospfLsdbApproachingOverflow trap signifies ++ that the number of LSAs in the router's link- ++ state database has exceeded ninety percent of ++ ospfExtLsdbLimit." ++ ::= { ospfTraps 15 } ++ ++ ++-- conformance information ++ ++ospfTrapConformance OBJECT IDENTIFIER ::= { ospfTrap 3 } ++ ++ospfTrapGroups OBJECT IDENTIFIER ::= { ospfTrapConformance 1 } ++ospfTrapCompliances OBJECT IDENTIFIER ::= { ospfTrapConformance 2 } ++ ++-- compliance statements ++ ++ ospfTrapCompliance MODULE-COMPLIANCE ++ STATUS current ++ DESCRIPTION ++ "The compliance statement " ++ MODULE -- this module ++ MANDATORY-GROUPS { ospfTrapControlGroup } ++ ++ ++ GROUP ospfTrapControlGroup ++ DESCRIPTION ++ "This group is optional but recommended for all ++ OSPF systems" ++ ::= { ospfTrapCompliances 1 } ++ ++ ++-- units of conformance ++ ++ ospfTrapControlGroup OBJECT-GROUP ++ OBJECTS { ++ ospfSetTrap, ++ ospfConfigErrorType, ++ ospfPacketType, ++ ospfPacketSrc ++ } ++ STATUS current ++ DESCRIPTION ++ "These objects are required to control traps ++ from OSPF systems." ++ ::= { ospfTrapGroups 1 } ++ ++ ++END +diff -ruN net-snmp-5.1.2-orig/mibs/RIPv2-MIB.txt net-snmp-5.1.2-5/mibs/RIPv2-MIB.txt +--- net-snmp-5.1.2-orig/mibs/RIPv2-MIB.txt 1970-01-01 01:00:00.000000000 +0100 ++++ net-snmp-5.1.2-5/mibs/RIPv2-MIB.txt 2005-03-13 16:17:21.000000000 +0100 +@@ -0,0 +1,530 @@ ++ RIPv2-MIB DEFINITIONS ::= BEGIN ++ ++ IMPORTS ++ MODULE-IDENTITY, OBJECT-TYPE, Counter32, ++ TimeTicks, IpAddress FROM SNMPv2-SMI ++ TEXTUAL-CONVENTION, RowStatus FROM SNMPv2-TC ++ MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF ++ mib-2 FROM RFC1213-MIB; ++ ++ -- This MIB module uses the extended OBJECT-TYPE macro as ++ -- defined in [9]. ++ ++ rip2 MODULE-IDENTITY ++ LAST-UPDATED "9407272253Z" -- Wed Jul 27 22:53:04 PDT 1994 ++ ORGANIZATION "IETF RIP-II Working Group" ++ CONTACT-INFO ++ " Fred Baker ++ Postal: Cisco Systems ++ 519 Lado Drive ++ Santa Barbara, California 93111 ++ Tel: +1 805 681 0115 ++ E-Mail: fbaker@cisco.com ++ ++ Postal: Gary Malkin ++ Xylogics, Inc. ++ 53 Third Avenue ++ Burlington, MA 01803 ++ ++ Phone: (617) 272-8140 ++ EMail: gmalkin@Xylogics.COM" ++ DESCRIPTION ++ "The MIB module to describe the RIP2 Version 2 Protocol" ++ ::= { mib-2 23 } ++ ++ -- RIP-2 Management Information Base ++ ++ -- the RouteTag type represents the contents of the ++ -- Route Domain field in the packet header or route entry. ++ -- The use of the Route Domain is deprecated. ++ ++ RouteTag ::= TEXTUAL-CONVENTION ++ STATUS current ++ DESCRIPTION ++ "the RouteTag type represents the contents of the Route Domain ++ field in the packet header or route entry" ++ SYNTAX OCTET STRING (SIZE (2)) ++ ++--4.1 Global Counters ++ ++-- The RIP-2 Globals Group. ++-- Implementation of this group is mandatory for systems ++-- which implement RIP-2. ++ ++-- These counters are intended to facilitate debugging quickly ++-- changing routes or failing neighbors ++ ++rip2Globals OBJECT IDENTIFIER ::= { rip2 1 } ++ ++ rip2GlobalRouteChanges OBJECT-TYPE ++ SYNTAX Counter32 ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The number of route changes made to the IP Route ++ Database by RIP. This does not include the refresh ++ of a route's age." ++ ::= { rip2Globals 1 } ++ ++ rip2GlobalQueries OBJECT-TYPE ++ SYNTAX Counter32 ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The number of responses sent to RIP queries ++ from other systems." ++ ::= { rip2Globals 2 } ++ ++--4.2 RIP Interface Tables ++ ++-- RIP Interfaces Groups ++-- Implementation of these Groups is mandatory for systems ++-- which implement RIP-2. ++ ++-- The RIP Interface Status Table. ++ ++ rip2IfStatTable OBJECT-TYPE ++ SYNTAX SEQUENCE OF Rip2IfStatEntry ++ MAX-ACCESS not-accessible ++ STATUS current ++ DESCRIPTION ++ "A list of subnets which require separate ++ status monitoring in RIP." ++ ::= { rip2 2 } ++ ++ rip2IfStatEntry OBJECT-TYPE ++ SYNTAX Rip2IfStatEntry ++ MAX-ACCESS not-accessible ++ STATUS current ++ DESCRIPTION ++ "A Single Routing Domain in a single Subnet." ++ INDEX { rip2IfStatAddress } ++ ::= { rip2IfStatTable 1 } ++ ++ Rip2IfStatEntry ::= ++ SEQUENCE { ++ rip2IfStatAddress ++ IpAddress, ++ rip2IfStatRcvBadPackets ++ Counter32, ++ rip2IfStatRcvBadRoutes ++ Counter32, ++ rip2IfStatSentUpdates ++ Counter32, ++ rip2IfStatStatus ++ RowStatus ++ } ++ ++ rip2IfStatAddress OBJECT-TYPE ++ SYNTAX IpAddress ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The IP Address of this system on the indicated ++ subnet. For unnumbered interfaces, the value 0.0.0.N, ++ where the least significant 24 bits (N) is the ifIndex ++ for the IP Interface in network byte order." ++ ::= { rip2IfStatEntry 1 } ++ ++ rip2IfStatRcvBadPackets OBJECT-TYPE ++ SYNTAX Counter32 ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The number of RIP response packets received by ++ the RIP process which were subsequently discarded ++ for any reason (e.g. a version 0 packet, or an ++ unknown command type)." ++ ::= { rip2IfStatEntry 2 } ++ ++ rip2IfStatRcvBadRoutes OBJECT-TYPE ++ SYNTAX Counter32 ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The number of routes, in valid RIP packets, ++ which were ignored for any reason (e.g. unknown ++ address family, or invalid metric)." ++ ::= { rip2IfStatEntry 3 } ++ ++ rip2IfStatSentUpdates OBJECT-TYPE ++ SYNTAX Counter32 ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The number of triggered RIP updates actually ++ sent on this interface. This explicitly does ++ NOT include full updates sent containing new ++ information." ++ ::= { rip2IfStatEntry 4 } ++ ++ rip2IfStatStatus OBJECT-TYPE ++ SYNTAX RowStatus ++ MAX-ACCESS read-create ++ STATUS current ++ DESCRIPTION ++ "Writing invalid has the effect of deleting ++ this interface." ++ ::= { rip2IfStatEntry 5 } ++ ++-- The RIP Interface Configuration Table. ++ ++ rip2IfConfTable OBJECT-TYPE ++ SYNTAX SEQUENCE OF Rip2IfConfEntry ++ MAX-ACCESS not-accessible ++ STATUS current ++ DESCRIPTION ++ "A list of subnets which require separate ++ configuration in RIP." ++ ::= { rip2 3 } ++ ++ rip2IfConfEntry OBJECT-TYPE ++ SYNTAX Rip2IfConfEntry ++ MAX-ACCESS not-accessible ++ STATUS current ++ DESCRIPTION ++ "A Single Routing Domain in a single Subnet." ++ INDEX { rip2IfConfAddress } ++ ::= { rip2IfConfTable 1 } ++ ++ Rip2IfConfEntry ::= ++ SEQUENCE { ++ rip2IfConfAddress ++ IpAddress, ++ rip2IfConfDomain ++ RouteTag, ++ rip2IfConfAuthType ++ INTEGER, ++ rip2IfConfAuthKey ++ OCTET STRING (SIZE(0..16)), ++ rip2IfConfSend ++ INTEGER, ++ rip2IfConfReceive ++ INTEGER, ++ rip2IfConfDefaultMetric ++ INTEGER, ++ rip2IfConfStatus ++ RowStatus, ++ rip2IfConfSrcAddress ++ IpAddress ++ } ++ ++ rip2IfConfAddress OBJECT-TYPE ++ SYNTAX IpAddress ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The IP Address of this system on the indicated ++ subnet. For unnumbered interfaces, the value 0.0.0.N, ++ where the least significant 24 bits (N) is the ifIndex ++ for the IP Interface in network byte order." ++ ::= { rip2IfConfEntry 1 } ++ ++ rip2IfConfDomain OBJECT-TYPE ++ SYNTAX RouteTag ++ MAX-ACCESS read-create ++ STATUS obsolete ++ DESCRIPTION ++ "Value inserted into the Routing Domain field ++ of all RIP packets sent on this interface." ++ DEFVAL { '0000'h } ++ ::= { rip2IfConfEntry 2 } ++ ++ rip2IfConfAuthType OBJECT-TYPE ++ SYNTAX INTEGER { ++ noAuthentication (1), ++ simplePassword (2), ++ md5 (3) ++ } ++ MAX-ACCESS read-create ++ STATUS current ++ DESCRIPTION ++ "The type of Authentication used on this ++ interface." ++ DEFVAL { noAuthentication } ++ ::= { rip2IfConfEntry 3 } ++ ++ rip2IfConfAuthKey OBJECT-TYPE ++ SYNTAX OCTET STRING (SIZE(0..16)) ++ MAX-ACCESS read-create ++ STATUS current ++ DESCRIPTION ++ "The value to be used as the Authentication Key ++ whenever the corresponding instance of ++ rip2IfConfAuthType has a value other than ++ noAuthentication. A modification of the corresponding ++ instance of rip2IfConfAuthType does not modify ++ the rip2IfConfAuthKey value. If a string shorter ++ than 16 octets is supplied, it will be left- ++ justified and padded to 16 octets, on the right, ++ with nulls (0x00). ++ ++ Reading this object always results in an OCTET ++ STRING of length zero; authentication may not ++ be bypassed by reading the MIB object." ++ DEFVAL { ''h } ++ ::= { rip2IfConfEntry 4 } ++ ++ rip2IfConfSend OBJECT-TYPE ++ SYNTAX INTEGER { ++ doNotSend (1), ++ ripVersion1 (2), ++ rip1Compatible (3), ++ ripVersion2 (4), ++ ripV1Demand (5), ++ ripV2Demand (6) ++ } ++ MAX-ACCESS read-create ++ STATUS current ++ DESCRIPTION ++ "What the router sends on this interface. ++ ripVersion1 implies sending RIP updates compliant ++ with RFC 1058. rip1Compatible implies ++ broadcasting RIP-2 updates using RFC 1058 route ++ subsumption rules. ripVersion2 implies ++ multicasting RIP-2 updates. ripV1Demand indicates ++ the use of Demand RIP on a WAN interface under RIP ++ Version 1 rules. ripV2Demand indicates the use of ++ Demand RIP on a WAN interface under Version 2 rules." ++ DEFVAL { rip1Compatible } ++ ::= { rip2IfConfEntry 5 } ++ ++ rip2IfConfReceive OBJECT-TYPE ++ SYNTAX INTEGER { ++ rip1 (1), ++ rip2 (2), ++ rip1OrRip2 (3), ++ doNotRecieve (4) ++ } ++ MAX-ACCESS read-create ++ STATUS current ++ DESCRIPTION ++ "This indicates which version of RIP updates ++ are to be accepted. Note that rip2 and ++ rip1OrRip2 implies reception of multicast ++ packets." ++ DEFVAL { rip1OrRip2 } ++ ::= { rip2IfConfEntry 6 } ++ ++ rip2IfConfDefaultMetric OBJECT-TYPE ++ SYNTAX INTEGER ( 0..15 ) ++ MAX-ACCESS read-create ++ STATUS current ++ DESCRIPTION ++ "This variable indicates the metric that is to ++ be used for the default route entry in RIP updates ++ originated on this interface. A value of zero ++ indicates that no default route should be ++ originated; in this case, a default route via ++ another router may be propagated." ++ ::= { rip2IfConfEntry 7 } ++ ++ rip2IfConfStatus OBJECT-TYPE ++ SYNTAX RowStatus ++ MAX-ACCESS read-create ++ STATUS current ++ DESCRIPTION ++ "Writing invalid has the effect of deleting ++ this interface." ++ ::= { rip2IfConfEntry 8 } ++ ++ rip2IfConfSrcAddress OBJECT-TYPE ++ SYNTAX IpAddress ++ MAX-ACCESS read-create ++ STATUS current ++ DESCRIPTION ++ "The IP Address this system will use as a source ++ address on this interface. If it is a numbered ++ interface, this MUST be the same value as ++ rip2IfConfAddress. On unnumbered interfaces, ++ it must be the value of rip2IfConfAddress for ++ some interface on the system." ++ ::= { rip2IfConfEntry 9 } ++ ++--4.3 Peer Table ++ ++-- Peer Table ++ ++-- The RIP Peer Group ++-- Implementation of this Group is Optional ++ ++-- This group provides information about active peer ++-- relationships intended to assist in debugging. An ++-- active peer is a router from which a valid RIP ++-- updated has been heard in the last 180 seconds. ++ ++ rip2PeerTable OBJECT-TYPE ++ SYNTAX SEQUENCE OF Rip2PeerEntry ++ MAX-ACCESS not-accessible ++ STATUS current ++ DESCRIPTION ++ "A list of RIP Peers." ++ ::= { rip2 4 } ++ ++ rip2PeerEntry OBJECT-TYPE ++ SYNTAX Rip2PeerEntry ++ MAX-ACCESS not-accessible ++ STATUS current ++ DESCRIPTION ++ "Information regarding a single routing peer." ++ INDEX { rip2PeerAddress, rip2PeerDomain } ++ ::= { rip2PeerTable 1 } ++ ++ Rip2PeerEntry ::= ++ SEQUENCE { ++ rip2PeerAddress ++ IpAddress, ++ rip2PeerDomain ++ RouteTag, ++ rip2PeerLastUpdate ++ TimeTicks, ++ rip2PeerVersion ++ INTEGER, ++ rip2PeerRcvBadPackets ++ Counter32, ++ rip2PeerRcvBadRoutes ++ Counter32 ++ } ++ ++ rip2PeerAddress OBJECT-TYPE ++ SYNTAX IpAddress ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The IP Address that the peer is using as its source ++ address. Note that on an unnumbered link, this may ++ not be a member of any subnet on the system." ++ ::= { rip2PeerEntry 1 } ++ ++ rip2PeerDomain OBJECT-TYPE ++ SYNTAX RouteTag ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The value in the Routing Domain field in RIP ++ packets received from the peer. As domain suuport ++ is deprecated, this must be zero." ++ ::= { rip2PeerEntry 2 } ++ ++ rip2PeerLastUpdate OBJECT-TYPE ++ SYNTAX TimeTicks ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The value of sysUpTime when the most recent ++ RIP update was received from this system." ++ ::= { rip2PeerEntry 3 } ++ ++ rip2PeerVersion OBJECT-TYPE ++ SYNTAX INTEGER ( 0..255 ) ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The RIP version number in the header of the ++ last RIP packet received." ++ ::= { rip2PeerEntry 4 } ++ ++ rip2PeerRcvBadPackets OBJECT-TYPE ++ SYNTAX Counter32 ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The number of RIP response packets from this ++ peer discarded as invalid." ++ ::= { rip2PeerEntry 5 } ++ ++ ++ rip2PeerRcvBadRoutes OBJECT-TYPE ++ SYNTAX Counter32 ++ MAX-ACCESS read-only ++ STATUS current ++ DESCRIPTION ++ "The number of routes from this peer that were ++ ignored because the entry format was invalid." ++ ::= { rip2PeerEntry 6 } ++ ++-- conformance information ++ ++rip2Conformance OBJECT IDENTIFIER ::= { rip2 5 } ++ ++rip2Groups OBJECT IDENTIFIER ::= { rip2Conformance 1 } ++rip2Compliances OBJECT IDENTIFIER ::= { rip2Conformance 2 } ++ ++-- compliance statements ++rip2Compliance MODULE-COMPLIANCE ++ STATUS current ++ DESCRIPTION ++ "The compliance statement " ++ MODULE -- this module ++ MANDATORY-GROUPS { ++ rip2GlobalGroup, ++ rip2IfStatGroup, ++ rip2IfConfGroup, ++ rip2PeerGroup ++ } ++ GROUP rip2GlobalGroup ++ DESCRIPTION ++ "This group defines global controls for RIP-II systems." ++ GROUP rip2IfStatGroup ++ DESCRIPTION ++ "This group defines interface statistics for RIP-II systems." ++ GROUP rip2IfConfGroup ++ DESCRIPTION ++ "This group defines interface configuration for RIP-II systems." ++ GROUP rip2PeerGroup ++ DESCRIPTION ++ "This group defines peer information for RIP-II systems." ++ ::= { rip2Compliances 1 } ++ ++-- units of conformance ++ ++rip2GlobalGroup OBJECT-GROUP ++ OBJECTS { ++ rip2GlobalRouteChanges, ++ rip2GlobalQueries ++ } ++ STATUS current ++ DESCRIPTION ++ "This group defines global controls for RIP-II systems." ++ ::= { rip2Groups 1 } ++rip2IfStatGroup OBJECT-GROUP ++ OBJECTS { ++ rip2IfStatAddress, ++ rip2IfStatRcvBadPackets, ++ rip2IfStatRcvBadRoutes, ++ rip2IfStatSentUpdates, ++ rip2IfStatStatus ++ } ++ STATUS current ++ DESCRIPTION ++ "This group defines interface statistics for RIP-II systems." ++ ::= { rip2Groups 2 } ++rip2IfConfGroup OBJECT-GROUP ++ OBJECTS { ++ rip2IfConfAddress, ++ rip2IfConfAuthType, ++ rip2IfConfAuthKey, ++ rip2IfConfSend, ++ rip2IfConfReceive, ++ rip2IfConfDefaultMetric, ++ rip2IfConfStatus, ++ rip2IfConfSrcAddress ++ } ++ STATUS current ++ DESCRIPTION ++ "This group defines interface configuration for RIP-II systems." ++ ::= { rip2Groups 3 } ++rip2PeerGroup OBJECT-GROUP ++ OBJECTS { ++ rip2PeerAddress, ++ rip2PeerDomain, ++ rip2PeerLastUpdate, ++ rip2PeerVersion, ++ rip2PeerRcvBadPackets, ++ rip2PeerRcvBadRoutes ++ } ++ STATUS current ++ DESCRIPTION ++ "This group defines peer information for RIP-II systems." ++ ::= { rip2Groups 4 } ++END +diff -ruN net-snmp-5.1.2-orig/mibs/SOURCE-ROUTING-MIB.txt net-snmp-5.1.2-5/mibs/SOURCE-ROUTING-MIB.txt +--- net-snmp-5.1.2-orig/mibs/SOURCE-ROUTING-MIB.txt 1970-01-01 01:00:00.000000000 +0100 ++++ net-snmp-5.1.2-5/mibs/SOURCE-ROUTING-MIB.txt 2005-03-13 16:17:21.000000000 +0100 +@@ -0,0 +1,452 @@ ++SOURCE-ROUTING-MIB DEFINITIONS ::= BEGIN ++ ++IMPORTS ++ Counter, Gauge ++ FROM RFC1155-SMI ++ dot1dBridge, dot1dSr ++ FROM BRIDGE-MIB ++ OBJECT-TYPE ++ FROM RFC-1212; ++ ++-- groups in the SR MIB ++ ++-- dot1dSr is imported from the Bridge MIB ++ ++dot1dPortPair OBJECT IDENTIFIER ::= { dot1dBridge 10 } ++ ++-- the dot1dSr group ++ ++-- this group is implemented by those bridges that ++-- support the source route bridging mode, including Source ++-- Routing and SRT bridges. ++ ++dot1dSrPortTable OBJECT-TYPE ++ SYNTAX SEQUENCE OF Dot1dSrPortEntry ++ ACCESS not-accessible ++ STATUS mandatory ++ DESCRIPTION ++ "A table that contains information about every ++ port that is associated with this source route ++ bridge." ++ ::= { dot1dSr 1 } ++ ++dot1dSrPortEntry OBJECT-TYPE ++ SYNTAX Dot1dSrPortEntry ++ ACCESS not-accessible ++ STATUS mandatory ++ DESCRIPTION ++ "A list of information for each port of a source ++ route bridge." ++ INDEX { dot1dSrPort } ++ ++ ::= { dot1dSrPortTable 1 } ++ ++Dot1dSrPortEntry ::= ++ SEQUENCE { ++ dot1dSrPort ++ INTEGER, ++ dot1dSrPortHopCount ++ INTEGER, ++ dot1dSrPortLocalSegment ++ INTEGER, ++ dot1dSrPortBridgeNum ++ INTEGER, ++ dot1dSrPortTargetSegment ++ INTEGER, ++ dot1dSrPortLargestFrame ++ INTEGER, ++ dot1dSrPortSTESpanMode ++ INTEGER, ++ dot1dSrPortSpecInFrames ++ Counter, ++ dot1dSrPortSpecOutFrames ++ Counter, ++ dot1dSrPortApeInFrames ++ Counter, ++ dot1dSrPortApeOutFrames ++ Counter, ++ dot1dSrPortSteInFrames ++ Counter, ++ dot1dSrPortSteOutFrames ++ Counter, ++ dot1dSrPortSegmentMismatchDiscards ++ Counter, ++ dot1dSrPortDuplicateSegmentDiscards ++ Counter, ++ dot1dSrPortHopCountExceededDiscards ++ Counter, ++ dot1dSrPortDupLanIdOrTreeErrors ++ Counter, ++ dot1dSrPortLanIdMismatches ++ Counter ++ } ++ ++dot1dSrPort OBJECT-TYPE ++ SYNTAX INTEGER (1..65535) ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "The port number of the port for which this entry ++ ++ contains Source Route management information." ++ ::= { dot1dSrPortEntry 1 } ++ ++dot1dSrPortHopCount OBJECT-TYPE ++ SYNTAX INTEGER ++ ACCESS read-write ++ STATUS mandatory ++ DESCRIPTION ++ "The maximum number of routing descriptors allowed ++ in an All Paths or Spanning Tree Explorer frames." ++ ::= { dot1dSrPortEntry 2 } ++ ++dot1dSrPortLocalSegment OBJECT-TYPE ++ SYNTAX INTEGER ++ ACCESS read-write ++ STATUS mandatory ++ DESCRIPTION ++ "The segment number that uniquely identifies the ++ segment to which this port is connected. Current ++ source routing protocols limit this value to the ++ range: 0 through 4095. (The value 0 is used by ++ some management applications for special test ++ cases.) A value of 65535 signifies that no segment ++ number is assigned to this port." ++ ::= { dot1dSrPortEntry 3 } ++ ++dot1dSrPortBridgeNum OBJECT-TYPE ++ SYNTAX INTEGER ++ ACCESS read-write ++ STATUS mandatory ++ DESCRIPTION ++ "A bridge number uniquely identifies a bridge when ++ more than one bridge is used to span the same two ++ segments. Current source routing protocols limit ++ this value to the range: 0 through 15. A value of ++ 65535 signifies that no bridge number is assigned ++ to this bridge." ++ ::= { dot1dSrPortEntry 4 } ++ ++dot1dSrPortTargetSegment OBJECT-TYPE ++ SYNTAX INTEGER ++ ACCESS read-write ++ STATUS mandatory ++ DESCRIPTION ++ "The segment number that corresponds to the target ++ segment this port is considered to be connected to ++ by the bridge. Current source routing protocols ++ limit this value to the range: 0 through 4095. ++ ++ (The value 0 is used by some management ++ applications for special test cases.) A value of ++ 65535 signifies that no target segment is assigned ++ to this port." ++ ::= { dot1dSrPortEntry 5 } ++ ++-- It would be nice if we could use ifMtu as the size of the ++-- largest frame, but we can't because ifMtu is defined to be ++-- the size that the (inter-)network layer can use which can ++-- differ from the MAC layer (especially if several layers of ++-- encapsulation are used). ++ ++dot1dSrPortLargestFrame OBJECT-TYPE ++ SYNTAX INTEGER ++ ACCESS read-write ++ STATUS mandatory ++ DESCRIPTION ++ "The maximum size of the INFO field (LLC and ++ above) that this port can send/receive. It does ++ not include any MAC level (framing) octets. The ++ value of this object is used by this bridge to ++ determine whether a modification of the ++ LargestFrame (LF, see [14]) field of the Routing ++ Control field of the Routing Information Field is ++ necessary. ++ ++ 64 valid values are defined by the IEEE 802.5M SRT ++ Addendum: 516, 635, 754, 873, 993, 1112, 1231, ++ 1350, 1470, 1542, 1615, 1688, 1761, 1833, 1906, ++ 1979, 2052, 2345, 2638, 2932, 3225, 3518, 3812, ++ 4105, 4399, 4865, 5331, 5798, 6264, 6730, 7197, ++ 7663, 8130, 8539, 8949, 9358, 9768, 10178, 10587, ++ 10997, 11407, 12199, 12992, 13785, 14578, 15370, ++ 16163, 16956, 17749, 20730, 23711, 26693, 29674, ++ 32655, 35637, 38618, 41600, 44591, 47583, 50575, ++ 53567, 56559, 59551, and 65535. ++ ++ An illegal value will not be accepted by the ++ bridge." ++ ::= { dot1dSrPortEntry 6 } ++ ++dot1dSrPortSTESpanMode OBJECT-TYPE ++ SYNTAX INTEGER { ++ auto-span(1), ++ disabled(2), ++ forced(3) ++ } ++ ACCESS read-write ++ STATUS mandatory ++ DESCRIPTION ++ "Determines how this port behaves when presented ++ with a Spanning Tree Explorer frame. The value ++ 'disabled(2)' indicates that the port will not ++ accept or send Spanning Tree Explorer packets; any ++ STE packets received will be silently discarded. ++ The value 'forced(3)' indicates the port will ++ always accept and propagate Spanning Tree Explorer ++ frames. This allows a manually configured ++ Spanning Tree for this class of packet to be ++ configured. Note that unlike transparent ++ bridging, this is not catastrophic to the network ++ if there are loops. The value 'auto-span(1)' can ++ only be returned by a bridge that both implements ++ the Spanning Tree Protocol and has use of the ++ protocol enabled on this port. The behavior of the ++ port for Spanning Tree Explorer frames is ++ determined by the state of dot1dStpPortState. If ++ the port is in the 'forwarding' state, the frame ++ will be accepted or propagated. Otherwise, it ++ will be silently discarded." ++ ::= { dot1dSrPortEntry 7 } ++ ++dot1dSrPortSpecInFrames OBJECT-TYPE ++ SYNTAX Counter ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "The number of Specifically Routed frames, also ++ referred to as Source Routed Frames, that have ++ been received from this port's segment." ++ ::= { dot1dSrPortEntry 8 } ++ ++dot1dSrPortSpecOutFrames OBJECT-TYPE ++ SYNTAX Counter ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "The number of Specifically Routed frames, also ++ referred to as Source Routed Frames, that this ++ port has transmitted on its segment." ++ ::= { dot1dSrPortEntry 9 } ++ ++dot1dSrPortApeInFrames OBJECT-TYPE ++ SYNTAX Counter ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "The number of All Paths Explorer frames, also ++ referred to as All Routes Explorer frames, that ++ have been received by this port from its segment." ++ ::= { dot1dSrPortEntry 10 } ++ ++dot1dSrPortApeOutFrames OBJECT-TYPE ++ SYNTAX Counter ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "The number of all Paths Explorer Frames, also ++ referred to as All Routes Explorer frames, that ++ have been transmitted by this port on its ++ segment." ++ ::= { dot1dSrPortEntry 11 } ++ ++dot1dSrPortSteInFrames OBJECT-TYPE ++ SYNTAX Counter ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "The number of spanning tree explorer frames that ++ have been received by this port from its segment." ++ ::= { dot1dSrPortEntry 12 } ++ ++dot1dSrPortSteOutFrames OBJECT-TYPE ++ SYNTAX Counter ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "The number of spanning tree explorer frames that ++ have been transmitted by this port on its ++ segment." ++ ::= { dot1dSrPortEntry 13 } ++ ++dot1dSrPortSegmentMismatchDiscards OBJECT-TYPE ++ SYNTAX Counter ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "The number of explorer frames that have been ++ discarded by this port because the routing ++ descriptor field contained an invalid adjacent ++ segment value." ++ ::= { dot1dSrPortEntry 14 } ++ ++dot1dSrPortDuplicateSegmentDiscards OBJECT-TYPE ++ SYNTAX Counter ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "The number of frames that have been discarded by ++ this port because the routing descriptor field ++ contained a duplicate segment identifier." ++ ::= { dot1dSrPortEntry 15 } ++ ++dot1dSrPortHopCountExceededDiscards OBJECT-TYPE ++ SYNTAX Counter ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "The number of explorer frames that have been ++ discarded by this port because the Routing ++ Information Field has exceeded the maximum route ++ descriptor length." ++ ::= { dot1dSrPortEntry 16 } ++ ++dot1dSrPortDupLanIdOrTreeErrors OBJECT-TYPE ++ SYNTAX Counter ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "The number of duplicate LAN IDs or Tree errors. ++ This helps in detection of problems in networks ++ containing older IBM Source Routing Bridges." ++ ::= { dot1dSrPortEntry 17 } ++ ++dot1dSrPortLanIdMismatches OBJECT-TYPE ++ SYNTAX Counter ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "The number of ARE and STE frames that were ++ discarded because the last LAN ID in the routing ++ information field did not equal the LAN-in ID. ++ This error can occur in implementations which do ++ only a LAN-in ID and Bridge Number check instead ++ of a LAN-in ID, Bridge Number, and LAN-out ID ++ check before they forward broadcast frames." ++ ::= { dot1dSrPortEntry 18 } ++ ++-- scalar object in dot1dSr ++ ++dot1dSrBridgeLfMode OBJECT-TYPE ++ SYNTAX INTEGER { ++ mode3(1), ++ mode6(2) ++ } ++ ACCESS read-write ++ STATUS mandatory ++ DESCRIPTION ++ "Indicates whether the bridge operates using older ++ 3 bit length negotiation fields or the newer 6 bit ++ length field in its RIF." ++ ::= { dot1dSr 2 } ++ ++-- The Port-Pair Database ++ ++-- Implementation of this group is optional. ++ ++-- This group is implemented by those bridges that support ++-- the direct multiport model of the source route bridging ++-- mode as defined in the IEEE 802.5 SRT Addendum to ++-- 802.1d. ++ ++-- Bridges implementing this group may report 65535 for ++-- dot1dSrPortBridgeNumber and dot1dSrPortTargetSegment, ++-- indicating that those objects are not applicable. ++ ++dot1dPortPairTableSize OBJECT-TYPE ++ SYNTAX Gauge ++ ACCESS read-only ++ STATUS mandatory ++ DESCRIPTION ++ "The total number of entries in the Bridge Port ++ Pair Database." ++ ::= { dot1dPortPair 1 } ++ ++-- the Bridge Port-Pair table ++ ++-- this table represents port pairs within a bridge forming ++-- a unique bridge path, as defined in the IEEE 802.5M SRT ++-- Addendum. ++ ++dot1dPortPairTable OBJECT-TYPE ++ SYNTAX SEQUENCE OF Dot1dPortPairEntry ++ ACCESS not-accessible ++ STATUS mandatory ++ DESCRIPTION ++ "A table that contains information about every ++ ++ port pair database entity associated with this ++ source routing bridge." ++ ::= { dot1dPortPair 2 } ++ ++dot1dPortPairEntry OBJECT-TYPE ++ SYNTAX Dot1dPortPairEntry ++ ACCESS not-accessible ++ STATUS mandatory ++ DESCRIPTION ++ "A list of information for each port pair entity ++ of a bridge." ++ INDEX { dot1dPortPairLowPort, dot1dPortPairHighPort } ++ ::= { dot1dPortPairTable 1 } ++ ++Dot1dPortPairEntry ::= ++ SEQUENCE { ++ dot1dPortPairLowPort ++ INTEGER, ++ dot1dPortPairHighPort ++ INTEGER, ++ dot1dPortPairBridgeNum ++ INTEGER, ++ dot1dPortPairBridgeState ++ INTEGER ++ } ++ ++dot1dPortPairLowPort OBJECT-TYPE ++ SYNTAX INTEGER (1..65535) ++ ACCESS read-write ++ STATUS mandatory ++ DESCRIPTION ++ "The port number of the lower numbered port for ++ which this entry contains port pair database ++ information." ++ ::= { dot1dPortPairEntry 1 } ++ ++dot1dPortPairHighPort OBJECT-TYPE ++ SYNTAX INTEGER (1..65535) ++ ACCESS read-write ++ STATUS mandatory ++ DESCRIPTION ++ "The port number of the higher numbered port for ++ which this entry contains port pair database ++ information." ++ ::= { dot1dPortPairEntry 2 } ++ ++dot1dPortPairBridgeNum OBJECT-TYPE ++ SYNTAX INTEGER ++ ++ ACCESS read-write ++ STATUS mandatory ++ DESCRIPTION ++ "A bridge number that uniquely identifies the path ++ provided by this source routing bridge between the ++ segments connected to dot1dPortPairLowPort and ++ dot1dPortPairHighPort. The purpose of bridge ++ number is to disambiguate between multiple paths ++ connecting the same two LANs." ++ ::= { dot1dPortPairEntry 3 } ++ ++dot1dPortPairBridgeState OBJECT-TYPE ++ SYNTAX INTEGER { ++ enabled(1), ++ disabled(2), ++ invalid(3) ++ } ++ ACCESS read-write ++ STATUS mandatory ++ DESCRIPTION ++ "The state of dot1dPortPairBridgeNum. Writing ++ 'invalid(3)' to this object removes the ++ corresponding entry." ++ ::= { dot1dPortPairEntry 4 } ++ ++END +diff -ruN net-snmp-5.1.2-orig/net-snmp-config.in net-snmp-5.1.2-5/net-snmp-config.in +--- net-snmp-5.1.2-orig/net-snmp-config.in 2004-06-17 15:39:28.000000000 +0200 ++++ net-snmp-5.1.2-5/net-snmp-config.in 2005-03-13 16:17:21.000000000 +0100 +@@ -113,13 +113,13 @@ + #################################################### client lib + --libs) + # use this one == --netsnmp-libs + --external-libs +- echo $NSC_LDFLAGS $NSC_LIBDIR -lnetsnmp $NSC_LIBS ++ echo $NSC_LDFLAGS $NSC_LIBDIR -lnetsnmp $NSC_LIBS @WRAPLIBS@ + ;; + --netsnmp-libs) + echo $NSC_LIBDIR -lnetsnmp + ;; + --external-libs) +- echo $NSC_LDFLAGS $NSC_LIBS ++ echo $NSC_LDFLAGS $NSC_LIBS @WRAPLIBS@ + ;; + #################################################### agent lib + --base-agent-libs) +@@ -130,13 +130,13 @@ + ;; + --agent-libs) + # use this one == --netsnmp-agent-libs + --external-libs +- echo $NSC_LDFLAGS $NSC_LIBDIR $NSC_BASE_AGENT_LIBS $NSC_AGENTLIBS ++ echo $NSC_LDFLAGS $NSC_LIBDIR $NSC_BASE_AGENT_LIBS $NSC_AGENTLIBS @WRAPLIBS@ + ;; + --netsnmp-agent-libs) + echo $NSC_LIBDIR $NSC_BASE_AGENT_LIBS + ;; + --external-agent-libs) +- echo $NSC_LDFLAGS $NSC_AGENTLIBS ++ echo $NSC_LDFLAGS $NSC_AGENTLIBS @WRAPLIBS@ + ;; + #################################################### + --version) +@@ -409,7 +409,7 @@ + echo "Ack. Can't create $tmpfile." + exit 1 + fi +- cmd="@CC@ $cflags @CFLAGS@ @DEVFLAGS@ -I. -I@includedir@ -o $outname $tmpfile $cfiles $NSC_LDFLAGS -L$NSC_EXEC_PREFIX/lib -lnetsnmpagent -lnetsnmphelpers -lnetsnmpmibs -lnetsnmp $NSC_AGENTLIBS $ldflags" ++ cmd="@CC@ $cflags @CFLAGS@ @DEVFLAGS@ -I. -I@includedir@ -o $outname $tmpfile $cfiles $NSC_LDFLAGS -L$NSC_EXEC_PREFIX/lib -lnetsnmpagent -lnetsnmphelpers -lnetsnmpmibs -lnetsnmp $NSC_AGENTLIBS @WRAPLIBS@ $ldflags" + echo "running: $cmd" + `$cmd` + if test "x$norm" != "x1" ; then +diff -ruN net-snmp-5.1.2-orig/perl/agent/netsnmp_request_infoPtr.pm net-snmp-5.1.2-5/perl/agent/netsnmp_request_infoPtr.pm +--- net-snmp-5.1.2-orig/perl/agent/netsnmp_request_infoPtr.pm 2002-09-19 22:38:24.000000000 +0200 ++++ net-snmp-5.1.2-5/perl/agent/netsnmp_request_infoPtr.pm 2005-03-13 16:17:21.000000000 +0100 +@@ -4,6 +4,7 @@ + + 1; + __END__ ++ + =head1 NAME + + NetSNMP::agent::netsnmp_request_infoPtr - Perl extension for request information +diff -ruN net-snmp-5.1.2-orig/snmplib/Makefile.in net-snmp-5.1.2-5/snmplib/Makefile.in +--- net-snmp-5.1.2-orig/snmplib/Makefile.in 2004-03-04 14:41:19.000000000 +0100 ++++ net-snmp-5.1.2-5/snmplib/Makefile.in 2005-03-13 16:17:21.000000000 +0100 +@@ -178,11 +178,11 @@ + + # how to build the libraries. + libnetsnmp.$(LIB_EXTENSION)$(LIB_VERSION): ${TOBJS} +- $(LIB_LD_CMD) libnetsnmp.$(LIB_EXTENSION)$(LIB_VERSION) ${TOBJS} ++ $(LIB_LD_CMD) libnetsnmp.$(LIB_EXTENSION)$(LIB_VERSION) ${TOBJS} @CRYPTOLIBS@ + $(RANLIB) libnetsnmp.$(LIB_EXTENSION)$(LIB_VERSION) + + libsnmp.$(LIB_EXTENSION)$(LIB_VERSION): ${TOBJS} +- $(LIB_LD_CMD) libsnmp.$(LIB_EXTENSION)$(LIB_VERSION) ${TOBJS} ++ $(LIB_LD_CMD) libsnmp.$(LIB_EXTENSION)$(LIB_VERSION) ${TOBJS} @CRYPTOLIBS@ + $(RANLIB) libsnmp.$(LIB_EXTENSION)$(LIB_VERSION) + + # +diff -ruN net-snmp-5.1.2-orig/snmplib/snmpUDPDomain.c net-snmp-5.1.2-5/snmplib/snmpUDPDomain.c +--- net-snmp-5.1.2-orig/snmplib/snmpUDPDomain.c 2004-07-07 14:21:32.000000000 +0200 ++++ net-snmp-5.1.2-5/snmplib/snmpUDPDomain.c 2005-03-13 16:17:21.000000000 +0100 +@@ -233,18 +233,6 @@ + netsnmp_transport_free(t); + return NULL; + } +-#ifdef SO_BSDCOMPAT +- /* +- * Patch for Linux. Without this, UDP packets that fail get an ICMP +- * response. Linux turns the failed ICMP response into an error message +- * and return value, unlike all other OS's. +- */ +- { +- int one = 1; +- setsockopt(t->sock, SOL_SOCKET, SO_BSDCOMPAT, (void *) &one, +- sizeof(one)); +- } +-#endif /*SO_BSDCOMPAT */ + /* + * SO_REUSEADDR will allow multiple apps to open the same port at + * the same time. Only the last one to open the socket will get +diff -ruN net-snmp-5.1.2-orig/snmplib/snmpUDPIPv6Domain.c net-snmp-5.1.2-5/snmplib/snmpUDPIPv6Domain.c +--- net-snmp-5.1.2-orig/snmplib/snmpUDPIPv6Domain.c 2004-07-22 19:45:00.000000000 +0200 ++++ net-snmp-5.1.2-5/snmplib/snmpUDPIPv6Domain.c 2005-03-13 16:17:21.000000000 +0100 +@@ -249,17 +249,6 @@ + netsnmp_transport_free(t); + return NULL; + } +-#ifdef SO_BSDCOMPAT +- /* +- * Patch for Linux. Without this, UDP packets that fail get an ICMP +- * response. Linux turns the failed ICMP response into an error message +- * and return value, unlike all other OS's. +- */ +- { +- int one = 1; +- setsockopt(t->sock, SOL_SOCKET, SO_BSDCOMPAT, &one, sizeof(one)); +- } +-#endif /*SO_BSDCOMPAT */ + + /* + * Try to set the send and receive buffers to a reasonably large value, so +diff -ruN net-snmp-5.1.2-orig/snmplib/snmp_logging.c net-snmp-5.1.2-5/snmplib/snmp_logging.c +--- net-snmp-5.1.2-orig/snmplib/snmp_logging.c 2004-03-31 03:06:08.000000000 +0200 ++++ net-snmp-5.1.2-5/snmplib/snmp_logging.c 2005-03-13 16:17:21.000000000 +0100 +@@ -860,13 +860,14 @@ + } else { + strcpy(sbuf, ""); + } +- newline = string[strlen(string) - 1] == '\n'; /* XXX - Eh ? */ + + if (logh->imagic) + printf( "%s%s", sbuf, string); + else + fprintf(stderr, "%s%s", sbuf, string); + ++ newline = string[strlen(string) - 1] == '\n'; /* XXX - Eh ? */ ++ + return 1; + } + +diff -ruN net-snmp-5.1.2-orig/snmplib/winservice.mc net-snmp-5.1.2-5/snmplib/winservice.mc +--- net-snmp-5.1.2-orig/snmplib/winservice.mc 2002-04-20 09:30:21.000000000 +0200 ++++ net-snmp-5.1.2-5/snmplib/winservice.mc 2005-03-13 16:17:21.000000000 +0100 +@@ -1,11 +1,11 @@ +-;//Message catalog for Windows Serivce Support routines +-;//To support event logging functionality +-;//By Raju Krishnappa(raju_krishnappa@yahoo.com) +- +-;//Message ID descriptions +- +-MessageId=100 +-SymbolicName=DISPLAY_MSG +-Language=English +-%1. +-. ++;//Message catalog for Windows Serivce Support routines ++;//To support event logging functionality ++;//By Raju Krishnappa(raju_krishnappa@yahoo.com) ++ ++;//Message ID descriptions ++ ++MessageId=100 ++SymbolicName=DISPLAY_MSG ++Language=English ++%1. ++. +diff -ruN net-snmp-5.1.2-orig/snmplib/winservice.rc net-snmp-5.1.2-5/snmplib/winservice.rc +--- net-snmp-5.1.2-orig/snmplib/winservice.rc 2002-04-20 09:30:21.000000000 +0200 ++++ net-snmp-5.1.2-5/snmplib/winservice.rc 2005-03-13 16:17:21.000000000 +0100 +@@ -1,2 +1,2 @@ +-LANGUAGE 0x9,0x1 +-1 11 MSG00001.bin ++LANGUAGE 0x9,0x1 ++1 11 MSG00001.bin diff --git a/openwrt/package/net-snmp/patches/750-ieee802dot11.patch b/openwrt/package/net-snmp/patches/750-ieee802dot11.patch new file mode 100644 index 0000000000..8939a44f23 --- /dev/null +++ b/openwrt/package/net-snmp/patches/750-ieee802dot11.patch @@ -0,0 +1,6156 @@ +--- net-snmp-5.1.2-orig/agent/mibgroup/ieee802dot11.c 1970-01-01 01:00:00.000000000 +0100 ++++ net-snmp-5.1.2-5/agent/mibgroup/ieee802dot11.c 2005-03-13 16:17:21.000000000 +0100 +@@ -0,0 +1,4915 @@ ++/**************************************************************************** ++* * ++* File Name: ieee802dot11.c * ++* Used By: * ++* * ++* Operating System: * ++* Purpose: * ++* * ++* Comments: * ++* * ++* Author: Larry Simmons * ++* lsimmons@avantcom.com * ++* www.avantcom.com * ++* * ++* Creation Date: 09/02/03 * ++* * ++* Ver Date Inits Modification * ++* ----- -------- ----- ------------ * ++* 0.0.1 09/02/03 LRS created * ++* 0.0.2 09/24/03 LRS wouldn't build after fresh ./configure * ++****************************************************************************/ ++/**************************************************************************** ++* Includes * ++****************************************************************************/ ++#include ++#include ++#include ++#include "ieee802dot11.h" ++#include "iwlib.h" ++ ++/**************************************************************************** ++* Defines * ++****************************************************************************/ ++#define DISPLAYWIEXT // display wireless ext info ++#define TABLE_SIZE 1 ++//#define MINLOADFREQ 15 // min reload frequency in seconds ++#define MINLOADFREQ 5 // min reload frequency in seconds // for testing ++#define PROC_NET_DEV "/proc/net/dev" ++#define PROC_NET_WIRELESS "/proc/net/wireless" ++ ++#ifndef UCHAR ++ typedef unsigned char UCHAR; ++#endif ++ ++/**************************************************************************** ++* Private Functions * ++****************************************************************************/ ++static void loadTables(); ++static void loadWiExt ( int, char *, struct wireless_info * ); ++static void load80211Structs ( int, char *, struct wireless_info * ); ++static void initStructs(); ++ ++// Wireless Extensions Specific Functions ++static void loadWiExtTo80211Structs ( int, char *, struct wireless_info * ); ++static void displayWiExt ( struct wireless_info ); ++ ++// Linked List Functions ++static void addList ( char *, char *, int ); ++static void initLists(); // initialize all the linked lists ++static void flushLists(); // flush all the linked lists ++static void flushList ( char * ); // flush a single linked list ++ ++// Utility Functions ++static int openSocket ( void ); ++static int mWatt2dbm ( int ); ++static char *htob ( char * ); ++static int hasChanged ( char *, int ); ++ ++/**************************************************************************** ++* Private Variables * ++****************************************************************************/ ++static unsigned long lastLoad = 0; // ET in secs at last table load ++ ++static struct avNode *lastNode, *newNode, *np; ++ ++/**************************************************************************** ++* External Functions * ++****************************************************************************/ ++ ++/**************************************************************************** ++* ieee802dot11_variables_oid: * ++* this is the top level oid that we want to register under. This * ++* is essentially a prefix, with the suffix appearing in the * ++* variable below. * ++****************************************************************************/ ++oid ieee802dot11_variables_oid[] = { 1,2,840,10036 }; ++ ++/**************************************************************************** ++* variable7 ieee802dot11_variables: * ++* this variable defines function callbacks and type return information * ++* for the ieee802dot11 mib section * ++****************************************************************************/ ++struct variable7 ieee802dot11_variables[] = { ++/* magic number , variable type , ro/rw , callback fn , L, oidsuffix */ ++#define DOT11STATIONID 3 ++ { DOT11STATIONID , ASN_OCTET_STR , RWRITE, var_dot11StationConfigTable, 4, { 1,1,1,1 } }, ++#define DOT11MEDIUMOCCUPANCYLIMIT 4 ++ { DOT11MEDIUMOCCUPANCYLIMIT, ASN_INTEGER , RWRITE, var_dot11StationConfigTable, 4, { 1,1,1,2 } }, ++#define DOT11CFPOLLABLE 5 ++ { DOT11CFPOLLABLE , ASN_INTEGER , RONLY , var_dot11StationConfigTable, 4, { 1,1,1,3 } }, ++#define DOT11CFPPERIOD 6 ++ { DOT11CFPPERIOD , ASN_INTEGER , RWRITE, var_dot11StationConfigTable, 4, { 1,1,1,4 } }, ++#define DOT11CFPMAXDURATION 7 ++ { DOT11CFPMAXDURATION , ASN_INTEGER , RWRITE, var_dot11StationConfigTable, 4, { 1,1,1,5 } }, ++#define DOT11AUTHENTICATIONRESPONSETIMEOUT 8 ++ { DOT11AUTHENTICATIONRESPONSETIMEOUT, ASN_INTEGER , RWRITE, var_dot11StationConfigTable, 4, { 1,1,1,6 } }, ++#define DOT11PRIVACYOPTIONIMPLEMENTED 9 ++ { DOT11PRIVACYOPTIONIMPLEMENTED, ASN_INTEGER , RONLY , var_dot11StationConfigTable, 4, { 1,1,1,7 } }, ++#define DOT11POWERMANAGEMENTMODE 10 ++ { DOT11POWERMANAGEMENTMODE, ASN_INTEGER , RWRITE, var_dot11StationConfigTable, 4, { 1,1,1,8 } }, ++#define DOT11DESIREDSSID 11 ++ { DOT11DESIREDSSID , ASN_OCTET_STR , RWRITE, var_dot11StationConfigTable, 4, { 1,1,1,9 } }, ++#define DOT11DESIREDBSSTYPE 12 ++ { DOT11DESIREDBSSTYPE , ASN_INTEGER , RWRITE, var_dot11StationConfigTable, 4, { 1,1,1,10 } }, ++#define DOT11OPERATIONALRATESET 13 ++ { DOT11OPERATIONALRATESET, ASN_OCTET_STR , RWRITE, var_dot11StationConfigTable, 4, { 1,1,1,11 } }, ++#define DOT11BEACONPERIOD 14 ++ { DOT11BEACONPERIOD , ASN_INTEGER , RWRITE, var_dot11StationConfigTable, 4, { 1,1,1,12 } }, ++#define DOT11DTIMPERIOD 15 ++ { DOT11DTIMPERIOD , ASN_INTEGER , RWRITE, var_dot11StationConfigTable, 4, { 1,1,1,13 } }, ++#define DOT11ASSOCIATIONRESPONSETIMEOUT 16 ++ { DOT11ASSOCIATIONRESPONSETIMEOUT, ASN_INTEGER , RWRITE, var_dot11StationConfigTable, 4, { 1,1,1,14 } }, ++#define DOT11DISASSOCIATEREASON 17 ++ { DOT11DISASSOCIATEREASON, ASN_INTEGER , RONLY , var_dot11StationConfigTable, 4, { 1,1,1,15 } }, ++#define DOT11DISASSOCIATESTATION 18 ++ { DOT11DISASSOCIATESTATION, ASN_OCTET_STR , RONLY , var_dot11StationConfigTable, 4, { 1,1,1,16 } }, ++#define DOT11DEAUTHENTICATEREASON 19 ++ { DOT11DEAUTHENTICATEREASON, ASN_INTEGER , RONLY , var_dot11StationConfigTable, 4, { 1,1,1,17 } }, ++#define DOT11DEAUTHENTICATESTATION 20 ++ { DOT11DEAUTHENTICATESTATION, ASN_OCTET_STR , RONLY , var_dot11StationConfigTable, 4, { 1,1,1,18 } }, ++#define DOT11AUTHENTICATEFAILSTATUS 21 ++ { DOT11AUTHENTICATEFAILSTATUS, ASN_INTEGER , RONLY , var_dot11StationConfigTable, 4, { 1,1,1,19 } }, ++#define DOT11AUTHENTICATEFAILSTATION 22 ++ { DOT11AUTHENTICATEFAILSTATION, ASN_OCTET_STR , RONLY , var_dot11StationConfigTable, 4, { 1,1,1,20 } }, ++ ++#define DOT11AUTHENTICATIONALGORITHM 26 ++ { DOT11AUTHENTICATIONALGORITHM, ASN_INTEGER , RONLY , var_dot11AuthenticationAlgorithmsTable, 4, { 1,2,1,2 } }, ++#define DOT11AUTHENTICATIONALGORITHMSENABLE 27 ++ { DOT11AUTHENTICATIONALGORITHMSENABLE, ASN_INTEGER , RWRITE, var_dot11AuthenticationAlgorithmsTable, 4, { 1,2,1,3 } }, ++ ++#define DOT11WEPDEFAULTKEYVALUE 31 ++ { DOT11WEPDEFAULTKEYVALUE, ASN_OCTET_STR , RWRITE, var_dot11WEPDefaultKeysTable, 4, { 1,3,1,2 } }, ++ ++#define DOT11WEPKEYMAPPINGADDRESS 35 ++ { DOT11WEPKEYMAPPINGADDRESS, ASN_OCTET_STR , RWRITE, var_dot11WEPKeyMappingsTable, 4, { 1,4,1,2 } }, ++#define DOT11WEPKEYMAPPINGWEPON 36 ++ { DOT11WEPKEYMAPPINGWEPON, ASN_INTEGER , RWRITE, var_dot11WEPKeyMappingsTable, 4, { 1,4,1,3 } }, ++#define DOT11WEPKEYMAPPINGVALUE 37 ++ { DOT11WEPKEYMAPPINGVALUE, ASN_OCTET_STR , RWRITE, var_dot11WEPKeyMappingsTable, 4, { 1,4,1,4 } }, ++#define DOT11WEPKEYMAPPINGSTATUS 38 ++ { DOT11WEPKEYMAPPINGSTATUS, ASN_INTEGER , RWRITE, var_dot11WEPKeyMappingsTable, 4, { 1,4,1,5 } }, ++ ++#define DOT11PRIVACYINVOKED 41 ++ { DOT11PRIVACYINVOKED , ASN_INTEGER , RWRITE, var_dot11PrivacyTable, 4, { 1,5,1,1 } }, ++#define DOT11WEPDEFAULTKEYID 42 ++ { DOT11WEPDEFAULTKEYID, ASN_INTEGER , RWRITE, var_dot11PrivacyTable, 4, { 1,5,1,2 } }, ++#define DOT11WEPKEYMAPPINGLENGTH 43 ++ { DOT11WEPKEYMAPPINGLENGTH, ASN_INTEGER , RWRITE, var_dot11PrivacyTable, 4, { 1,5,1,3 } }, ++#define DOT11EXCLUDEUNENCRYPTED 44 ++ { DOT11EXCLUDEUNENCRYPTED, ASN_INTEGER , RWRITE, var_dot11PrivacyTable, 4, { 1,5,1,4 } }, ++#define DOT11WEPICVERRORCOUNT 45 ++ { DOT11WEPICVERRORCOUNT, ASN_COUNTER , RONLY , var_dot11PrivacyTable, 4, { 1,5,1,5 } }, ++#define DOT11WEPEXCLUDEDCOUNT 46 ++ { DOT11WEPEXCLUDEDCOUNT, ASN_COUNTER , RONLY , var_dot11PrivacyTable, 4, { 1,5,1,6 } }, ++ ++#define DOT11MACADDRESS 49 ++ { DOT11MACADDRESS , ASN_OCTET_STR , RONLY , var_dot11OperationTable, 4, { 2,1,1,1 } }, ++#define DOT11RTSTHRESHOLD 50 ++ { DOT11RTSTHRESHOLD , ASN_INTEGER , RWRITE, var_dot11OperationTable, 4, { 2,1,1,2 } }, ++#define DOT11SHORTRETRYLIMIT 51 ++ { DOT11SHORTRETRYLIMIT, ASN_INTEGER , RWRITE, var_dot11OperationTable, 4, { 2,1,1,3 } }, ++#define DOT11LONGRETRYLIMIT 52 ++ { DOT11LONGRETRYLIMIT , ASN_INTEGER , RWRITE, var_dot11OperationTable, 4, { 2,1,1,4 } }, ++#define DOT11FRAGMENTATIONTHRESHOLD 53 ++ { DOT11FRAGMENTATIONTHRESHOLD, ASN_INTEGER , RWRITE, var_dot11OperationTable, 4, { 2,1,1,5 } }, ++#define DOT11MAXTRANSMITMSDULIFETIME 54 ++ { DOT11MAXTRANSMITMSDULIFETIME, ASN_INTEGER , RWRITE, var_dot11OperationTable, 4, { 2,1,1,6 } }, ++#define DOT11MAXRECEIVELIFETIME 55 ++ { DOT11MAXRECEIVELIFETIME, ASN_INTEGER , RWRITE, var_dot11OperationTable, 4, { 2,1,1,7 } }, ++#define DOT11MANUFACTURERID 56 ++ { DOT11MANUFACTURERID , ASN_OCTET_STR , RONLY , var_dot11OperationTable, 4, { 2,1,1,8 } }, ++#define DOT11PRODUCTID 57 ++ { DOT11PRODUCTID , ASN_OCTET_STR , RONLY , var_dot11OperationTable, 4, { 2,1,1,9 } }, ++ ++#define DOT11TRANSMITTEDFRAGMENTCOUNT 60 ++ { DOT11TRANSMITTEDFRAGMENTCOUNT, ASN_COUNTER , RONLY , var_dot11CountersTable, 4, { 2,2,1,1 } }, ++#define DOT11MULTICASTTRANSMITTEDFRAMECOUNT 61 ++ { DOT11MULTICASTTRANSMITTEDFRAMECOUNT, ASN_COUNTER , RONLY , var_dot11CountersTable, 4, { 2,2,1,2 } }, ++#define DOT11FAILEDCOUNT 62 ++ { DOT11FAILEDCOUNT , ASN_COUNTER , RONLY , var_dot11CountersTable, 4, { 2,2,1,3 } }, ++#define DOT11RETRYCOUNT 63 ++ { DOT11RETRYCOUNT , ASN_COUNTER , RONLY , var_dot11CountersTable, 4, { 2,2,1,4 } }, ++#define DOT11MULTIPLERETRYCOUNT 64 ++ { DOT11MULTIPLERETRYCOUNT, ASN_COUNTER , RONLY , var_dot11CountersTable, 4, { 2,2,1,5 } }, ++#define DOT11FRAMEDUPLICATECOUNT 65 ++ { DOT11FRAMEDUPLICATECOUNT, ASN_COUNTER , RONLY , var_dot11CountersTable, 4, { 2,2,1,6 } }, ++#define DOT11RTSSUCCESSCOUNT 66 ++ { DOT11RTSSUCCESSCOUNT, ASN_COUNTER , RONLY , var_dot11CountersTable, 4, { 2,2,1,7 } }, ++#define DOT11RTSFAILURECOUNT 67 ++ { DOT11RTSFAILURECOUNT, ASN_COUNTER , RONLY , var_dot11CountersTable, 4, { 2,2,1,8 } }, ++#define DOT11ACKFAILURECOUNT 68 ++ { DOT11ACKFAILURECOUNT, ASN_COUNTER , RONLY , var_dot11CountersTable, 4, { 2,2,1,9 } }, ++#define DOT11RECEIVEDFRAGMENTCOUNT 69 ++ { DOT11RECEIVEDFRAGMENTCOUNT, ASN_COUNTER , RONLY , var_dot11CountersTable, 4, { 2,2,1,10 } }, ++#define DOT11MULTICASTRECEIVEDFRAMECOUNT 70 ++ { DOT11MULTICASTRECEIVEDFRAMECOUNT, ASN_COUNTER , RONLY , var_dot11CountersTable, 4, { 2,2,1,11 } }, ++#define DOT11FCSERRORCOUNT 71 ++ { DOT11FCSERRORCOUNT , ASN_COUNTER , RONLY , var_dot11CountersTable, 4, { 2,2,1,12 } }, ++#define DOT11TRANSMITTEDFRAMECOUNT 72 ++ { DOT11TRANSMITTEDFRAMECOUNT, ASN_COUNTER , RONLY , var_dot11CountersTable, 4, { 2,2,1,13 } }, ++#define DOT11WEPUNDECRYPTABLECOUNT 73 ++ { DOT11WEPUNDECRYPTABLECOUNT, ASN_COUNTER , RONLY , var_dot11CountersTable, 4, { 2,2,1,14 } }, ++ ++#define DOT11ADDRESS 77 ++ { DOT11ADDRESS , ASN_OCTET_STR , RWRITE, var_dot11GroupAddressesTable, 4, { 2,3,1,2 } }, ++#define DOT11GROUPADDRESSESSTATUS 78 ++ { DOT11GROUPADDRESSESSTATUS, ASN_INTEGER , RWRITE, var_dot11GroupAddressesTable, 4, { 2,3,1,3 } }, ++ ++#define DOT11RESOURCETYPEIDNAME 79 ++ { DOT11RESOURCETYPEIDNAME, ASN_OCTET_STR , RONLY , var_ieee802dot11, 3, { 3,1,1 } }, ++#define DOT11MANUFACTUREROUI 82 ++ { DOT11MANUFACTUREROUI, ASN_OCTET_STR , RONLY , var_dot11ResourceInfoTable, 5, { 3,1,2,1,1 } }, ++#define DOT11MANUFACTURERNAME 83 ++ { DOT11MANUFACTURERNAME, ASN_OCTET_STR , RONLY , var_dot11ResourceInfoTable, 5, { 3,1,2,1,2 } }, ++#define DOT11MANUFACTURERPRODUCTNAME 84 ++ { DOT11MANUFACTURERPRODUCTNAME, ASN_OCTET_STR , RONLY , var_dot11ResourceInfoTable, 5, { 3,1,2,1,3 } }, ++#define DOT11MANUFACTURERPRODUCTVERSION 85 ++ { DOT11MANUFACTURERPRODUCTVERSION, ASN_OCTET_STR , RONLY , var_dot11ResourceInfoTable, 5, { 3,1,2,1,4 } }, ++ ++#define DOT11PHYTYPE 88 ++ { DOT11PHYTYPE , ASN_INTEGER , RONLY , var_dot11PhyOperationTable, 4, { 4,1,1,1 } }, ++#define DOT11CURRENTREGDOMAIN 89 ++ { DOT11CURRENTREGDOMAIN, ASN_INTEGER , RWRITE, var_dot11PhyOperationTable, 4, { 4,1,1,2 } }, ++#define DOT11TEMPTYPE 90 ++ { DOT11TEMPTYPE , ASN_INTEGER , RONLY , var_dot11PhyOperationTable, 4, { 4,1,1,3 } }, ++#define DOT11CURRENTTXANTENNA 93 ++ { DOT11CURRENTTXANTENNA, ASN_INTEGER , RWRITE, var_dot11PhyAntennaTable, 4, { 4,2,1,1 } }, ++#define DOT11DIVERSITYSUPPORT 94 ++ { DOT11DIVERSITYSUPPORT, ASN_INTEGER , RONLY , var_dot11PhyAntennaTable, 4, { 4,2,1,2 } }, ++#define DOT11CURRENTRXANTENNA 95 ++ { DOT11CURRENTRXANTENNA, ASN_INTEGER , RWRITE, var_dot11PhyAntennaTable, 4, { 4,2,1,3 } }, ++#define DOT11NUMBERSUPPORTEDPOWERLEVELS 98 ++ { DOT11NUMBERSUPPORTEDPOWERLEVELS, ASN_INTEGER , RONLY , var_dot11PhyTxPowerTable, 4, { 4,3,1,1 } }, ++#define DOT11TXPOWERLEVEL1 99 ++ { DOT11TXPOWERLEVEL1 , ASN_INTEGER , RONLY , var_dot11PhyTxPowerTable, 4, { 4,3,1,2 } }, ++#define DOT11TXPOWERLEVEL2 100 ++ { DOT11TXPOWERLEVEL2 , ASN_INTEGER , RONLY , var_dot11PhyTxPowerTable, 4, { 4,3,1,3 } }, ++#define DOT11TXPOWERLEVEL3 101 ++ { DOT11TXPOWERLEVEL3 , ASN_INTEGER , RONLY , var_dot11PhyTxPowerTable, 4, { 4,3,1,4 } }, ++#define DOT11TXPOWERLEVEL4 102 ++ { DOT11TXPOWERLEVEL4 , ASN_INTEGER , RONLY , var_dot11PhyTxPowerTable, 4, { 4,3,1,5 } }, ++#define DOT11TXPOWERLEVEL5 103 ++ { DOT11TXPOWERLEVEL5 , ASN_INTEGER , RONLY , var_dot11PhyTxPowerTable, 4, { 4,3,1,6 } }, ++#define DOT11TXPOWERLEVEL6 104 ++ { DOT11TXPOWERLEVEL6 , ASN_INTEGER , RONLY , var_dot11PhyTxPowerTable, 4, { 4,3,1,7 } }, ++#define DOT11TXPOWERLEVEL7 105 ++ { DOT11TXPOWERLEVEL7 , ASN_INTEGER , RONLY , var_dot11PhyTxPowerTable, 4, { 4,3,1,8 } }, ++#define DOT11TXPOWERLEVEL8 106 ++ { DOT11TXPOWERLEVEL8 , ASN_INTEGER , RONLY , var_dot11PhyTxPowerTable, 4, { 4,3,1,9 } }, ++#define DOT11CURRENTTXPOWERLEVEL 107 ++ { DOT11CURRENTTXPOWERLEVEL, ASN_INTEGER , RWRITE, var_dot11PhyTxPowerTable, 4, { 4,3,1,10 } }, ++ ++#define DOT11HOPTIME 110 ++ { DOT11HOPTIME , ASN_INTEGER , RONLY , var_dot11PhyFHSSTable, 4, { 4,4,1,1 } }, ++#define DOT11CURRENTCHANNELNUMBER 111 ++ { DOT11CURRENTCHANNELNUMBER, ASN_INTEGER , RWRITE, var_dot11PhyFHSSTable, 4, { 4,4,1,2 } }, ++#define DOT11MAXDWELLTIME 112 ++ { DOT11MAXDWELLTIME , ASN_INTEGER , RONLY , var_dot11PhyFHSSTable, 4, { 4,4,1,3 } }, ++#define DOT11CURRENTDWELLTIME 113 ++ { DOT11CURRENTDWELLTIME, ASN_INTEGER , RWRITE, var_dot11PhyFHSSTable, 4, { 4,4,1,4 } }, ++#define DOT11CURRENTSET 114 ++ { DOT11CURRENTSET , ASN_INTEGER , RWRITE, var_dot11PhyFHSSTable, 4, { 4,4,1,5 } }, ++#define DOT11CURRENTPATTERN 115 ++ { DOT11CURRENTPATTERN , ASN_INTEGER , RWRITE, var_dot11PhyFHSSTable, 4, { 4,4,1,6 } }, ++#define DOT11CURRENTINDEX 116 ++ { DOT11CURRENTINDEX , ASN_INTEGER , RWRITE, var_dot11PhyFHSSTable, 4, { 4,4,1,7 } }, ++ ++#define DOT11CURRENTCHANNEL 119 ++ { DOT11CURRENTCHANNEL , ASN_INTEGER , RWRITE, var_dot11PhyDSSSTable, 4, { 4,5,1,1 } }, ++#define DOT11CCAMODESUPPORTED 120 ++ { DOT11CCAMODESUPPORTED, ASN_INTEGER , RONLY , var_dot11PhyDSSSTable, 4, { 4,5,1,2 } }, ++#define DOT11CURRENTCCAMODE 121 ++ { DOT11CURRENTCCAMODE , ASN_INTEGER , RWRITE, var_dot11PhyDSSSTable, 4, { 4,5,1,3 } }, ++#define DOT11EDTHRESHOLD 122 ++ { DOT11EDTHRESHOLD , ASN_INTEGER , RWRITE, var_dot11PhyDSSSTable, 4, { 4,5,1,4 } }, ++ ++#define DOT11CCAWATCHDOGTIMERMAX 125 ++ { DOT11CCAWATCHDOGTIMERMAX, ASN_INTEGER , RWRITE, var_dot11PhyIRTable, 4, { 4,6,1,1 } }, ++#define DOT11CCAWATCHDOGCOUNTMAX 126 ++ { DOT11CCAWATCHDOGCOUNTMAX, ASN_INTEGER , RWRITE, var_dot11PhyIRTable, 4, { 4,6,1,2 } }, ++#define DOT11CCAWATCHDOGTIMERMIN 127 ++ { DOT11CCAWATCHDOGTIMERMIN, ASN_INTEGER , RWRITE, var_dot11PhyIRTable, 4, { 4,6,1,3 } }, ++#define DOT11CCAWATCHDOGCOUNTMIN 128 ++ { DOT11CCAWATCHDOGCOUNTMIN, ASN_INTEGER , RWRITE, var_dot11PhyIRTable, 4, { 4,6,1,4 } }, ++ ++#define DOT11REGDOMAINSSUPPORTVALUE 132 ++ { DOT11REGDOMAINSSUPPORTVALUE, ASN_INTEGER , RONLY , var_dot11RegDomainsSupportedTable, 4, { 4,7,1,2 } }, ++ ++#define DOT11SUPPORTEDTXANTENNA 136 ++ { DOT11SUPPORTEDTXANTENNA, ASN_INTEGER , RWRITE, var_dot11AntennasListTable, 4, { 4,8,1,2 } }, ++#define DOT11SUPPORTEDRXANTENNA 137 ++ { DOT11SUPPORTEDRXANTENNA, ASN_INTEGER , RWRITE, var_dot11AntennasListTable, 4, { 4,8,1,3 } }, ++#define DOT11DIVERSITYSELECTIONRX 138 ++ { DOT11DIVERSITYSELECTIONRX, ASN_INTEGER , RWRITE, var_dot11AntennasListTable, 4, { 4,8,1,4 } }, ++ ++#define DOT11SUPPORTEDDATARATESTXVALUE 142 ++ { DOT11SUPPORTEDDATARATESTXVALUE, ASN_INTEGER , RONLY , var_dot11SupportedDataRatesTxTable, 4, { 4,9,1,2 } }, ++ ++#define DOT11SUPPORTEDDATARATESRXVALUE 146 ++ { DOT11SUPPORTEDDATARATESRXVALUE, ASN_INTEGER , RONLY , var_dot11SupportedDataRatesRxTable, 4, { 4,10,1,2 } }, ++}; ++// ( L = length of the oidsuffix ) ++ ++/**************************************************************************** ++* * ++* init_ieee802dot11() - perform any required initialization * ++* * ++****************************************************************************/ ++void init_ieee802dot11 ( void ) { ++ ++ /* register ourselves with the agent to handle our mib tree */ ++ REGISTER_MIB("ieee802dot11", ieee802dot11_variables, variable7, ++ ieee802dot11_variables_oid); ++ ++ initLists(); ++} ++ ++/**************************************************************************** ++* * ++* shutdown_ieee802dot11() - perform any required cleanup @ shutdown * ++* * ++****************************************************************************/ ++void shutdown_ieee802dot11 ( void ) ++{ ++ flushLists(); ++} ++ ++/**************************************************************************** ++* * ++* var_ieee802dot11() - * ++* * ++****************************************************************************/ ++unsigned char * ++var_ieee802dot11 ( struct variable *vp, ++ oid *name, ++ size_t *length, ++ int exact, ++ size_t *var_len, ++ WriteMethod **write_method) ++{ ++ loadTables(); ++ ++ if ( header_generic ( vp, name, length, exact,var_len,write_method ) ++ == MATCH_FAILED ) ++ return NULL; ++ ++ switch ( vp->magic ) { ++ ++ case DOT11RESOURCETYPEIDNAME: ++ if ( !haveResourceTypeIDName ) ++ return NULL; ++ *var_len = strlen ( resourceTypeIDName ); ++ return ( UCHAR * ) resourceTypeIDName; ++ ++ default: ++ ERROR_MSG ( "" ); ++ } ++ ++ return NULL; ++} ++ ++/**************************************************************************** ++* * ++* var_dot11StationConfigTable() - return a variable value from the table * ++* * ++****************************************************************************/ ++unsigned char * ++var_dot11StationConfigTable ( struct variable *vp, ++ oid *name, ++ size_t *length, ++ int exact, ++ size_t *var_len, ++ WriteMethod **write_method ) ++{ ++ int found = FALSE; ++ oid rName [ MAX_OID_LEN ]; // OID to be returned ++ static char MACWork[17]; ++ ++ loadTables(); ++ memcpy (( char * ) rName, ( char * ) vp->name, ( int ) vp->namelen * sizeof ( oid )); ++ for ( np = LIST_FIRST ( &scList ); np != NULL; np = LIST_NEXT ( np, nodes )) { ++ sc = ( struct scTbl_data * ) np->data; ++ rName[vp->namelen] = sc->ifIndex; ++ if (( exact && ( snmp_oid_compare ( rName, vp->namelen + 1, name, *length ) == 0 )) || ++ ( !exact && ( snmp_oid_compare ( rName, vp->namelen + 1, name, *length ) > 0 ))) { ++ ++ switch ( vp->magic ) { // found requested OID, now check for requested variable ++ case DOT11STATIONID: ++ if ( sc->haveStationID ) found = TRUE; break; ++ case DOT11MEDIUMOCCUPANCYLIMIT: ++ if ( sc->haveMediumOccupancyLimit ) found = TRUE; break; ++ case DOT11CFPOLLABLE: ++ if ( sc->haveCFPPollable ) found = TRUE; break; ++ case DOT11CFPPERIOD: ++ if ( sc->haveCFPPeriod ) found = TRUE; break; ++ case DOT11CFPMAXDURATION: ++ if ( sc->haveMaxDuration ) found = TRUE; break; ++ case DOT11AUTHENTICATIONRESPONSETIMEOUT: ++ if ( sc->haveAuthenticationResponseTimeOut ) found = TRUE; break; ++ case DOT11PRIVACYOPTIONIMPLEMENTED: ++ if ( sc->havePrivacyOptionImplemented ) found = TRUE; break; ++ case DOT11POWERMANAGEMENTMODE: ++ if ( sc->havePowerManagementMode ) found = TRUE; break; ++ case DOT11DESIREDSSID: ++ if ( sc->haveDesiredSSID ) found = TRUE; break; ++ case DOT11DESIREDBSSTYPE: ++ if ( sc->haveDesiredBSSType ) found = TRUE; break; ++ case DOT11OPERATIONALRATESET: ++ if ( sc->haveOperationalRateSet ) found = TRUE; break; ++ case DOT11BEACONPERIOD: ++ if ( sc->haveBeaconPeriod ) found = TRUE; break; ++ case DOT11DTIMPERIOD: ++ if ( sc->haveDTIMPeriod ) found = TRUE; break; ++ case DOT11ASSOCIATIONRESPONSETIMEOUT: ++ if ( sc->haveAssociationResponseTimeOut ) found = TRUE; break; ++ case DOT11DISASSOCIATEREASON: ++ if ( sc->disAssociationReason ) found = TRUE; break; ++ case DOT11DISASSOCIATESTATION: ++ if ( sc->haveDisAssociationStation ) found = TRUE; break; ++ case DOT11DEAUTHENTICATEREASON: ++ if ( sc->deAuthenticationReason ) found = TRUE; break; ++ case DOT11DEAUTHENTICATESTATION: ++ if ( sc->haveDeAuthenticationStation ) found = TRUE; break; ++ case DOT11AUTHENTICATEFAILSTATUS: ++ if ( sc->authenticateFailStatus ) found = TRUE; break; ++ case DOT11AUTHENTICATEFAILSTATION: ++ if ( sc->haveAuthenticateFailStation ) found = TRUE; break; ++ } ++ } ++ if ( found ) ++ break; ++ } ++ ++ if ( !found ) ++ return NULL; ++ ++ memcpy (( char * ) name, ( char * ) rName, ( vp->namelen + 1 ) * sizeof ( oid )); ++ *length = vp->namelen + 1; ++ *var_len = sizeof ( long ); ++ *write_method = NULL; ++ ++ switch ( vp->magic ) { ++ ++ case DOT11STATIONID: ++// *write_method = write_dot11StationID; ++ MACWork[ 0] = sc->stationID [ 0]; ++ MACWork[ 1] = sc->stationID [ 1]; ++ MACWork[ 2] = sc->stationID [ 3]; ++ MACWork[ 3] = sc->stationID [ 4]; ++ MACWork[ 4] = sc->stationID [ 6]; ++ MACWork[ 5] = sc->stationID [ 7]; ++ MACWork[ 6] = sc->stationID [ 9]; ++ MACWork[ 7] = sc->stationID [10]; ++ MACWork[ 8] = sc->stationID [12]; ++ MACWork[ 9] = sc->stationID [13]; ++ MACWork[10] = sc->stationID [15]; ++ MACWork[11] = sc->stationID [16]; ++ MACWork[12] = '\0'; ++ *var_len = 6; ++ return ( UCHAR * ) htob ( MACWork ); ++ ++ case DOT11MEDIUMOCCUPANCYLIMIT: ++// *write_method = write_dot11MediumOccupancyLimit; ++ sc->mediumOccupancyLimit = 5; ++ return ( UCHAR * ) &sc->mediumOccupancyLimit; ++ ++ case DOT11CFPOLLABLE: ++ return ( UCHAR * ) &sc->CFPPollable; ++ ++ case DOT11CFPPERIOD: ++// *write_method = write_dot11CFPPeriod; ++ return ( UCHAR * ) &sc->CFPPeriod; ++ ++ case DOT11CFPMAXDURATION: ++// *write_method = write_dot11CFPMaxDuration; ++ return ( UCHAR * ) &sc->maxDuration; ++ ++ case DOT11AUTHENTICATIONRESPONSETIMEOUT: ++// *write_method = write_dot11AuthenticationResponseTimeOut; ++ return ( UCHAR * ) &sc->authenticationResponseTimeOut; ++ ++ case DOT11PRIVACYOPTIONIMPLEMENTED: ++ return ( UCHAR * ) &sc->privacyOptionImplemented; ++ ++ case DOT11POWERMANAGEMENTMODE: ++// *write_method = write_dot11PowerManagementMode; ++ return ( UCHAR * ) &sc->powerManagementMode; ++ ++ case DOT11DESIREDSSID: ++// *write_method = write_dot11DesiredSSID; ++ *var_len = strlen ( sc->desiredSSID ); ++ return ( UCHAR * ) sc->desiredSSID; ++ ++ case DOT11DESIREDBSSTYPE: ++// *write_method = write_dot11DesiredBSSType; ++ return ( UCHAR * ) &sc->desiredBSSType; ++ ++ case DOT11OPERATIONALRATESET: ++// *write_method = write_dot11OperationalRateSet; ++ *var_len = strlen ( sc->operationalRateSet ); ++ return ( UCHAR * ) sc->operationalRateSet; ++ ++ case DOT11BEACONPERIOD: ++// *write_method = write_dot11BeaconPeriod; ++ return ( UCHAR * ) &sc->beaconPeriod; ++ ++ case DOT11DTIMPERIOD: ++// *write_method = write_dot11DTIMPeriod; ++ return ( UCHAR * ) &sc->DTIMPeriod; ++ ++ case DOT11ASSOCIATIONRESPONSETIMEOUT: ++// *write_method = write_dot11AssociationResponseTimeOut; ++ return ( UCHAR * ) &sc->associationResponseTimeOut; ++ ++ case DOT11DISASSOCIATEREASON: ++ return ( UCHAR * ) &sc->disAssociationReason; ++ ++ case DOT11DISASSOCIATESTATION: ++ MACWork[ 0] = sc->disAssociationStation[ 0]; ++ MACWork[ 1] = sc->disAssociationStation[ 1]; ++ MACWork[ 2] = sc->disAssociationStation[ 3]; ++ MACWork[ 3] = sc->disAssociationStation[ 4]; ++ MACWork[ 4] = sc->disAssociationStation[ 6]; ++ MACWork[ 5] = sc->disAssociationStation[ 7]; ++ MACWork[ 6] = sc->disAssociationStation[ 9]; ++ MACWork[ 7] = sc->disAssociationStation[10]; ++ MACWork[ 8] = sc->disAssociationStation[12]; ++ MACWork[ 9] = sc->disAssociationStation[13]; ++ MACWork[10] = sc->disAssociationStation[15]; ++ MACWork[11] = sc->disAssociationStation[16]; ++ MACWork[12] = '\0'; ++ *var_len = 6; ++ return ( UCHAR * ) htob ( MACWork ); ++ ++ case DOT11DEAUTHENTICATEREASON: ++ return ( UCHAR * ) &sc->deAuthenticationReason; ++ ++ case DOT11DEAUTHENTICATESTATION: ++ MACWork[ 0] = sc->deAuthenticationStation[ 0]; ++ MACWork[ 1] = sc->deAuthenticationStation[ 1]; ++ MACWork[ 2] = sc->deAuthenticationStation[ 3]; ++ MACWork[ 3] = sc->deAuthenticationStation[ 4]; ++ MACWork[ 4] = sc->deAuthenticationStation[ 6]; ++ MACWork[ 5] = sc->deAuthenticationStation[ 7]; ++ MACWork[ 6] = sc->deAuthenticationStation[ 9]; ++ MACWork[ 7] = sc->deAuthenticationStation[10]; ++ MACWork[ 8] = sc->deAuthenticationStation[12]; ++ MACWork[ 9] = sc->deAuthenticationStation[13]; ++ MACWork[10] = sc->deAuthenticationStation[15]; ++ MACWork[11] = sc->deAuthenticationStation[16]; ++ MACWork[12] = '\0'; ++ *var_len = 6; ++ return ( UCHAR * ) htob ( MACWork ); ++ ++ case DOT11AUTHENTICATEFAILSTATUS: ++ return ( UCHAR * ) &sc->authenticateFailStatus; ++ ++ case DOT11AUTHENTICATEFAILSTATION: ++ MACWork[ 0] = sc->authenticateFailStation[ 0]; ++ MACWork[ 1] = sc->authenticateFailStation[ 1]; ++ MACWork[ 2] = sc->authenticateFailStation[ 3]; ++ MACWork[ 3] = sc->authenticateFailStation[ 4]; ++ MACWork[ 4] = sc->authenticateFailStation[ 6]; ++ MACWork[ 5] = sc->authenticateFailStation[ 7]; ++ MACWork[ 6] = sc->authenticateFailStation[ 9]; ++ MACWork[ 7] = sc->authenticateFailStation[10]; ++ MACWork[ 8] = sc->authenticateFailStation[12]; ++ MACWork[ 9] = sc->authenticateFailStation[13]; ++ MACWork[10] = sc->authenticateFailStation[15]; ++ MACWork[11] = sc->authenticateFailStation[16]; ++ MACWork[12] = '\0'; ++ *var_len = 6; ++ return ( UCHAR * ) htob ( MACWork ); ++ ++ default: ++ ERROR_MSG ( "" ); ++ } ++ ++ return NULL; ++} ++ ++/**************************************************************************** ++* * ++* var_dot11AuthenticationAlgorithmsTable() - * ++* * ++****************************************************************************/ ++unsigned char * ++var_dot11AuthenticationAlgorithmsTable ( struct variable *vp, ++ oid *name, ++ size_t *length, ++ int exact, ++ size_t *var_len, ++ WriteMethod **write_method ) ++{ ++ int found = FALSE; ++ oid rName [ MAX_OID_LEN ]; // OID to be returned ++ ++ loadTables(); ++ memcpy (( char * ) rName, ( char * ) vp->name, ( int ) vp->namelen * sizeof ( oid )); ++ for ( np = LIST_FIRST ( &aaList ); np != NULL; np = LIST_NEXT ( np, nodes )) { ++ aa = ( struct aaTbl_data * ) np->data; ++ rName[vp->namelen + 0] = aa->ifIndex; ++ rName[vp->namelen + 1] = aa->authenticationAlgorithmsIndex; ++ if (( exact && ( snmp_oid_compare ( rName, vp->namelen + 2, name, *length ) == 0 )) || ++ ( !exact && ( snmp_oid_compare ( rName, vp->namelen + 2, name, *length ) > 0 ))) { ++ switch ( vp->magic ) { ++ case DOT11AUTHENTICATIONALGORITHM: ++ if ( aa->haveAuthenticationAlgorithm ) found = TRUE; break; ++ case DOT11AUTHENTICATIONALGORITHMSENABLE: ++ if ( aa->authenticationAlgorithmsEnable ) found = TRUE; break; ++ } ++ } ++ if ( found ) ++ break; ++ } ++ ++ if ( !found ) ++ return NULL; ++ ++ memcpy (( char * ) name, ( char * ) rName, ( vp->namelen + 2 ) * sizeof ( oid )); ++ *length = vp->namelen + 2; ++ *var_len = sizeof ( long ); ++ *write_method = NULL; ++ ++ switch ( vp->magic ) { ++ ++ case DOT11AUTHENTICATIONALGORITHM: ++ return ( UCHAR * ) &aa->authenticationAlgorithm; ++ ++ case DOT11AUTHENTICATIONALGORITHMSENABLE: ++// *write_method = write_dot11AuthenticationAlgorithmsEnable; ++ return ( UCHAR * ) &aa->authenticationAlgorithmsEnable; ++ ++ default: ++ ERROR_MSG ( "" ); ++ } ++ ++ return NULL; ++} ++ ++/**************************************************************************** ++* * ++* var_dot11WEPDefaultKeysTable() - * ++* * ++****************************************************************************/ ++unsigned char * ++var_dot11WEPDefaultKeysTable ( struct variable *vp, ++ oid *name, ++ size_t *length, ++ int exact, ++ size_t *var_len, ++ WriteMethod **write_method ) ++{ ++ int found = FALSE; ++ oid rName [ MAX_OID_LEN ]; // OID to be returned ++ ++ loadTables(); ++ memcpy (( char * ) rName, ( char * ) vp->name, ( int ) vp->namelen * sizeof ( oid )); ++ for ( np = LIST_FIRST ( &dfList ); np != NULL; np = LIST_NEXT ( np, nodes )) { ++ df = ( struct dfTbl_data * ) np->data; ++ rName[vp->namelen + 0] = df->ifIndex; ++ rName[vp->namelen + 1] = df->WEPDefaultKeyIndex; ++ if (( exact && ( snmp_oid_compare ( rName, vp->namelen + 2, name, *length ) == 0 )) || ++ ( !exact && ( snmp_oid_compare ( rName, vp->namelen + 2, name, *length ) > 0 ))) { ++ switch ( vp->magic ) { ++ case DOT11WEPDEFAULTKEYVALUE: ++ if ( df->haveWEPDefaultKeyValue ) found = TRUE; break; ++ } ++ } ++ if ( found ) ++ break; ++ } ++ ++ if ( !found ) ++ return NULL; ++ ++ memcpy (( char * ) name, ( char * ) rName, ( vp->namelen + 2 ) * sizeof ( oid )); ++ *length = vp->namelen + 2; ++ *var_len = sizeof ( long ); ++ *write_method = NULL; ++ ++ switch ( vp->magic ) { ++ ++ case DOT11WEPDEFAULTKEYVALUE: ++// *write_method = write_dot11WEPDefaultKeyValue; ++ *var_len = strlen ( df->WEPDefaultKeyValue ); ++ return ( UCHAR * ) df->WEPDefaultKeyValue; ++ ++ default: ++ ERROR_MSG ( "" ); ++ } ++ ++ return NULL; ++} ++ ++/**************************************************************************** ++* * ++* var_dot11WEPKeyMappingsTable() - * ++* * ++****************************************************************************/ ++unsigned char * ++var_dot11WEPKeyMappingsTable ( struct variable *vp, ++ oid *name, ++ size_t *length, ++ int exact, ++ size_t *var_len, ++ WriteMethod **write_method) ++{ ++ static char MACWork[17]; ++ int found = FALSE; ++ oid rName [ MAX_OID_LEN ]; // OID to be returned ++ ++ loadTables(); ++ memcpy (( char * ) rName, ( char * ) vp->name, ( int ) vp->namelen * sizeof ( oid )); ++ for ( np = LIST_FIRST ( &kmList ); np != NULL; np = LIST_NEXT ( np, nodes )) { ++ km = ( struct kmTbl_data * ) np->data; ++ rName[vp->namelen + 0] = km->ifIndex; ++ rName[vp->namelen + 1] = km->WEPKeyMappingIndex; ++ if (( exact && ( snmp_oid_compare ( rName, vp->namelen + 2, name, *length ) == 0 )) || ++ ( !exact && ( snmp_oid_compare ( rName, vp->namelen + 2, name, *length ) > 0 ))) { ++ switch ( vp->magic ) { ++ case DOT11WEPKEYMAPPINGADDRESS: ++ if ( km->haveWEPKeyMappingAddress ) found = TRUE; break; ++ case DOT11WEPKEYMAPPINGWEPON: ++ if ( km->haveWEPKeyMappingWEPOn ) found = TRUE; break; ++ case DOT11WEPKEYMAPPINGVALUE: ++ if ( km->haveWEPKeyMappingValue ) found = TRUE; break; ++ case DOT11WEPKEYMAPPINGSTATUS: ++ if ( km->haveWEPKeyMappingStatus ) found = TRUE; break; ++ } ++ } ++ if ( found ) ++ break; ++ } ++ ++ if ( !found ) ++ return NULL; ++ ++ memcpy (( char * ) name, ( char * ) rName, ( vp->namelen + 2 ) * sizeof ( oid )); ++ *length = vp->namelen + 2; ++ *var_len = sizeof ( long ); ++ *write_method = NULL; ++ ++ switch ( vp->magic ) { ++ ++ case DOT11WEPKEYMAPPINGADDRESS: ++// *write_method = write_dot11WEPKeyMappingAddress; ++ MACWork[ 0] = km->WEPKeyMappingAddress[ 0]; ++ MACWork[ 1] = km->WEPKeyMappingAddress[ 1]; ++ MACWork[ 2] = km->WEPKeyMappingAddress[ 3]; ++ MACWork[ 3] = km->WEPKeyMappingAddress[ 4]; ++ MACWork[ 4] = km->WEPKeyMappingAddress[ 6]; ++ MACWork[ 5] = km->WEPKeyMappingAddress[ 7]; ++ MACWork[ 6] = km->WEPKeyMappingAddress[ 9]; ++ MACWork[ 7] = km->WEPKeyMappingAddress[10]; ++ MACWork[ 8] = km->WEPKeyMappingAddress[12]; ++ MACWork[ 9] = km->WEPKeyMappingAddress[13]; ++ MACWork[10] = km->WEPKeyMappingAddress[15]; ++ MACWork[11] = km->WEPKeyMappingAddress[16]; ++ MACWork[12] = '\0'; ++ *var_len = 6; ++ return ( UCHAR * ) htob ( MACWork ); ++ ++ case DOT11WEPKEYMAPPINGWEPON: ++// *write_method = write_dot11WEPKeyMappingWEPOn; ++ return ( UCHAR * ) &km->WEPKeyMappingWEPOn; ++ ++ case DOT11WEPKEYMAPPINGVALUE: ++// *write_method = write_dot11WEPKeyMappingValue; ++ *var_len = strlen ( km->WEPKeyMappingValue ); ++ return ( UCHAR * ) km->WEPKeyMappingValue; ++ ++ case DOT11WEPKEYMAPPINGSTATUS: ++// *write_method = write_dot11WEPKeyMappingStatus; ++ return ( UCHAR * ) &km->WEPKeyMappingStatus; ++ ++ default: ++ ERROR_MSG ( "" ); ++ } ++ return NULL; ++} ++ ++/**************************************************************************** ++* * ++* var_dot11PrivacyTable() - * ++* * ++****************************************************************************/ ++unsigned char * ++var_dot11PrivacyTable ( struct variable *vp, ++ oid *name, ++ size_t *length, ++ int exact, ++ size_t *var_len, ++ WriteMethod **write_method ) ++{ ++ int found = FALSE; ++ oid rName [ MAX_OID_LEN ]; // OID to be returned ++ ++ loadTables(); ++ memcpy (( char * ) rName, ( char * ) vp->name, ( int ) vp->namelen * sizeof ( oid )); ++ for ( np = LIST_FIRST ( &prList ); np != NULL; np = LIST_NEXT ( np, nodes )) { ++ pr = ( struct prTbl_data * ) np->data; ++ rName[vp->namelen] = pr->ifIndex; ++ if (( exact && ( snmp_oid_compare ( rName, vp->namelen + 1, name, *length ) == 0 )) || ++ ( !exact && ( snmp_oid_compare ( rName, vp->namelen + 1, name, *length ) > 0 ))) { ++ switch ( vp->magic ) { ++ case DOT11PRIVACYINVOKED: ++ if ( pr->havePrivacyInvoked ) found = TRUE; break; ++ case DOT11WEPDEFAULTKEYID: ++ if ( pr->haveWEPDefaultKeyID ) found = TRUE; break; ++ case DOT11WEPKEYMAPPINGLENGTH: ++ if ( pr->haveWEPKeyMappingLength ) found = TRUE; break; ++ case DOT11EXCLUDEUNENCRYPTED: ++ if ( pr->haveExcludeUnencrypted ) found = TRUE; break; ++ case DOT11WEPICVERRORCOUNT: ++ if ( pr->haveWEPICVErrorCount ) found = TRUE; break; ++ case DOT11WEPEXCLUDEDCOUNT: ++ if ( pr->haveWEPExcludedCount ) found = TRUE; break; ++ } ++ } ++ if ( found ) ++ break; ++ } ++ ++ if ( !found ) ++ return NULL; ++ ++ memcpy (( char * ) name, ( char * ) rName, ( vp->namelen + 1 ) * sizeof ( oid )); ++ *length = vp->namelen + 1; ++ *var_len = sizeof ( long ); ++ *write_method = NULL; ++ ++ switch ( vp->magic ) { ++ ++ case DOT11PRIVACYINVOKED: ++// *write_method = write_dot11PrivacyInvoked; ++ return ( UCHAR * ) &pr->privacyInvoked; ++ ++ case DOT11WEPDEFAULTKEYID: ++// *write_method = write_dot11WEPDefaultKeyID; ++ return ( UCHAR * ) &pr->WEPDefaultKeyID; ++ ++ case DOT11WEPKEYMAPPINGLENGTH: ++// *write_method = write_dot11WEPKeyMappingLength; ++ return ( UCHAR * ) &pr->WEPKeyMappingLength; ++ ++ case DOT11EXCLUDEUNENCRYPTED: ++// *write_method = write_dot11ExcludeUnencrypted; ++ return ( UCHAR * ) &pr->excludeUnencrypted; ++ ++ case DOT11WEPICVERRORCOUNT: ++ return ( UCHAR * ) &pr->WEPICVErrorCount; ++ ++ case DOT11WEPEXCLUDEDCOUNT: ++ return ( UCHAR * ) &pr->WEPExcludedCount; ++ ++ default: ++ ERROR_MSG ( "" ); ++ } ++ ++ return NULL; ++} ++ ++/**************************************************************************** ++* * ++* var_dot11OperationTable() - * ++* * ++****************************************************************************/ ++unsigned char * ++var_dot11OperationTable ( struct variable *vp, ++ oid *name, ++ size_t *length, ++ int exact, ++ size_t *var_len, ++ WriteMethod **write_method ) ++{ ++ int found = FALSE; ++ oid rName [ MAX_OID_LEN ]; // OID to be returned ++ static char MACWork[17]; ++ ++ loadTables(); ++ memcpy (( char * ) rName, ( char * ) vp->name, ( int ) vp->namelen * sizeof ( oid )); ++ for ( np = LIST_FIRST ( &opList ); np != NULL; np = LIST_NEXT ( np, nodes )) { ++ op = ( struct opTbl_data * ) np->data; ++ rName[vp->namelen] = op->ifIndex; ++ if (( exact && ( snmp_oid_compare ( rName, vp->namelen + 1, name, *length ) == 0 )) || ++ ( !exact && ( snmp_oid_compare ( rName, vp->namelen + 1, name, *length ) > 0 ))) { ++ ++ switch ( vp->magic ) { // found requested OID, now check for requested variable ++ case DOT11MACADDRESS: ++ if ( op->haveMACAddress ) found = TRUE; break; ++ case DOT11RTSTHRESHOLD: ++ if ( op->haveRTSThreshold ) found = TRUE; break; ++ case DOT11SHORTRETRYLIMIT: ++ if ( op->haveShortRetryLimit ) found = TRUE; break; ++ case DOT11LONGRETRYLIMIT: ++ if ( op->haveLongRetryLimit ) found = TRUE; break; ++ case DOT11FRAGMENTATIONTHRESHOLD: ++ if ( op->haveFragmentationThreshold ) found = TRUE; break; ++ case DOT11MAXTRANSMITMSDULIFETIME: ++ if ( op->haveMaxTransmitMSDULifetime ) found = TRUE; break; ++ case DOT11MAXRECEIVELIFETIME: ++ if ( op->haveMaxReceiveLifetime ) found = TRUE; break; ++ case DOT11MANUFACTURERID: ++ if ( op->haveManufacturerID ) found = TRUE; break; ++ case DOT11PRODUCTID: ++ if ( op->haveProductID ) found = TRUE; break; ++ } ++ } ++ if ( found ) ++ break; ++ } ++ ++ if ( !found ) ++ return NULL; ++ ++ memcpy (( char * ) name, ( char * ) rName, ( vp->namelen + 1 ) * sizeof ( oid )); ++ *length = vp->namelen + 1; ++ *var_len = sizeof ( long ); ++ *write_method = NULL; ++ ++ switch ( vp->magic ) { ++ ++ case DOT11MACADDRESS: ++ MACWork[ 0] = op->MACAddress[ 0]; ++ MACWork[ 1] = op->MACAddress[ 1]; ++ MACWork[ 2] = op->MACAddress[ 3]; ++ MACWork[ 3] = op->MACAddress[ 4]; ++ MACWork[ 4] = op->MACAddress[ 6]; ++ MACWork[ 5] = op->MACAddress[ 7]; ++ MACWork[ 6] = op->MACAddress[ 9]; ++ MACWork[ 7] = op->MACAddress[10]; ++ MACWork[ 8] = op->MACAddress[12]; ++ MACWork[ 9] = op->MACAddress[13]; ++ MACWork[10] = op->MACAddress[15]; ++ MACWork[11] = op->MACAddress[16]; ++ MACWork[12] = '\0'; ++ *var_len = 6; ++ return ( UCHAR * ) htob ( MACWork ); ++ ++ case DOT11RTSTHRESHOLD: ++// *write_method = write_dot11RTSThreshold; ++ return ( UCHAR * ) &op->RTSThreshold; ++ ++ case DOT11SHORTRETRYLIMIT: ++// *write_method = write_dot11ShortRetryLimit; ++ return ( UCHAR * ) &op->shortRetryLimit; ++ ++ case DOT11LONGRETRYLIMIT: ++// *write_method = write_dot11LongRetryLimit; ++ return ( UCHAR * ) &op->longRetryLimit; ++ ++ case DOT11FRAGMENTATIONTHRESHOLD: ++// *write_method = write_dot11FragmentationThreshold; ++ return ( UCHAR * ) &op->fragmentationThreshold; ++ ++ case DOT11MAXTRANSMITMSDULIFETIME: ++// *write_method = write_dot11MaxTransmitMSDULifetime; ++ return ( UCHAR * ) &op->maxTransmitMSDULifetime; ++ ++ case DOT11MAXRECEIVELIFETIME: ++// *write_method = write_dot11MaxReceiveLifetime; ++ return ( UCHAR * ) &op->maxReceiveLifetime; ++ ++ case DOT11MANUFACTURERID: ++ *var_len = strlen ( op->manufacturerID ); ++ return ( UCHAR * ) op->manufacturerID; ++ ++ case DOT11PRODUCTID: ++ *var_len = strlen ( op->productID ); ++ return ( UCHAR * ) op->productID; ++ ++ default: ++ ERROR_MSG ( "" ); ++ } ++ ++ return NULL; ++} ++ ++/**************************************************************************** ++* * ++* var_dot11CountersTable() - * ++* * ++****************************************************************************/ ++unsigned char * ++var_dot11CountersTable(struct variable *vp, ++ oid *name, ++ size_t *length, ++ int exact, ++ size_t *var_len, ++ WriteMethod **write_method) ++{ ++ int found = FALSE; ++ oid rName [ MAX_OID_LEN ]; // OID to be returned ++ ++ loadTables(); ++ memcpy (( char * ) rName, ( char * ) vp->name, ( int ) vp->namelen * sizeof ( oid )); ++ for ( np = LIST_FIRST ( &coList ); np != NULL; np = LIST_NEXT ( np, nodes )) { ++ co = ( struct coTbl_data * ) np->data; ++ rName[vp->namelen] = co->ifIndex; ++ if (( exact && ( snmp_oid_compare ( rName, vp->namelen + 1, name, *length ) == 0 )) || ++ ( !exact && ( snmp_oid_compare ( rName, vp->namelen + 1, name, *length ) > 0 ))) { ++ switch ( vp->magic ) { ++ case DOT11TRANSMITTEDFRAGMENTCOUNT: ++ if ( co->haveTransmittedFragmentCount ) found = TRUE; break; ++ case DOT11MULTICASTTRANSMITTEDFRAMECOUNT: ++ if ( co->haveTransmittedFrameCount ) found = TRUE; break; ++ case DOT11FAILEDCOUNT: ++ if ( co->haveFailedCount ) found = TRUE; break; ++ case DOT11RETRYCOUNT: ++ if ( co->haveRetryCount ) found = TRUE; break; ++ case DOT11MULTIPLERETRYCOUNT: ++ if ( co->haveMultipleRetryCount ) found = TRUE; break; ++ case DOT11FRAMEDUPLICATECOUNT: ++ if ( co->haveFrameDuplicateCount ) found = TRUE; break; ++ case DOT11RTSSUCCESSCOUNT: ++ if ( co->haveRTSSuccessCount ) found = TRUE; break; ++ case DOT11RTSFAILURECOUNT: ++ if ( co->haveRTSFailureCount ) found = TRUE; break; ++ case DOT11ACKFAILURECOUNT: ++ if ( co->haveACKFailureCount ) found = TRUE; break; ++ case DOT11RECEIVEDFRAGMENTCOUNT: ++ if ( co->haveReceivedFragmentCount ) found = TRUE; break; ++ case DOT11MULTICASTRECEIVEDFRAMECOUNT: ++ if ( co->haveMulticastReceivedFrameCount ) found = TRUE; break; ++ case DOT11FCSERRORCOUNT: ++ if ( co->haveFCSErrorCount ) found = TRUE; break; ++ case DOT11TRANSMITTEDFRAMECOUNT: ++ if ( co->haveTransmittedFrameCount ) found = TRUE; break; ++ case DOT11WEPUNDECRYPTABLECOUNT: ++ if ( co->haveWEPUndecryptableCount ) found = TRUE; break; ++ } ++ } ++ if ( found ) ++ break; ++ } ++ ++ if ( !found ) ++ return NULL; ++ ++ memcpy (( char * ) name, ( char * ) rName, ( vp->namelen + 1 ) * sizeof ( oid )); ++ *length = vp->namelen + 1; ++ *var_len = sizeof ( long ); ++ *write_method = NULL; ++ ++ switch ( vp->magic ) { ++ ++ case DOT11TRANSMITTEDFRAGMENTCOUNT: return ( UCHAR * ) &co->transmittedFragmentCount; ++ case DOT11MULTICASTTRANSMITTEDFRAMECOUNT: return ( UCHAR * ) &co->transmittedFrameCount; ++ case DOT11FAILEDCOUNT: return ( UCHAR * ) &co->failedCount; ++ case DOT11RETRYCOUNT: return ( UCHAR * ) &co->retryCount; ++ case DOT11MULTIPLERETRYCOUNT: return ( UCHAR * ) &co->multipleRetryCount; ++ case DOT11FRAMEDUPLICATECOUNT: return ( UCHAR * ) &co->frameDuplicateCount; ++ case DOT11RTSSUCCESSCOUNT: return ( UCHAR * ) &co->RTSSuccessCount; ++ case DOT11RTSFAILURECOUNT: return ( UCHAR * ) &co->RTSFailureCount; ++ case DOT11ACKFAILURECOUNT: return ( UCHAR * ) &co->ACKFailureCount; ++ case DOT11RECEIVEDFRAGMENTCOUNT: return ( UCHAR * ) &co->receivedFragmentCount; ++ case DOT11MULTICASTRECEIVEDFRAMECOUNT: return ( UCHAR * ) &co->multicastReceivedFrameCount; ++ case DOT11FCSERRORCOUNT: return ( UCHAR * ) &co->FCSErrorCount; ++ case DOT11TRANSMITTEDFRAMECOUNT: return ( UCHAR * ) &co->transmittedFrameCount; ++ case DOT11WEPUNDECRYPTABLECOUNT: return ( UCHAR * ) &co->WEPUndecryptableCount; ++ ++ default: ++ ERROR_MSG ( "" ); ++ } ++ ++ return NULL; ++} ++ ++/**************************************************************************** ++* * ++* var_dot11GroupAddressesTable() - * ++* * ++****************************************************************************/ ++unsigned char * ++var_dot11GroupAddressesTable(struct variable *vp, ++ oid *name, ++ size_t *length, ++ int exact, ++ size_t *var_len, ++ WriteMethod **write_method) ++{ ++ static char MACWork[17]; ++ int found = FALSE; ++ oid rName [ MAX_OID_LEN ]; // OID to be returned ++ ++ loadTables(); ++ memcpy (( char * ) rName, ( char * ) vp->name, ( int ) vp->namelen * sizeof ( oid )); ++ for ( np = LIST_FIRST ( &gaList ); np != NULL; np = LIST_NEXT ( np, nodes )) { ++ ga = ( struct gaTbl_data * ) np->data; ++ rName[vp->namelen + 0] = ga->ifIndex; ++ rName[vp->namelen + 1] = ga->groupAddressesIndex; ++ if (( exact && ( snmp_oid_compare ( rName, vp->namelen + 2, name, *length ) == 0 )) || ++ ( !exact && ( snmp_oid_compare ( rName, vp->namelen + 2, name, *length ) > 0 ))) { ++ switch ( vp->magic ) { ++ case DOT11ADDRESS: ++ if ( ga->haveAddress ) found = TRUE; break; ++ case DOT11GROUPADDRESSESSTATUS: ++ if ( ga->haveGroupAddressesStatus ) found = TRUE; break; ++ } ++ } ++ if ( found ) ++ break; ++ } ++ ++ if ( !found ) ++ return NULL; ++ ++ memcpy (( char * ) name, ( char * ) rName, ( vp->namelen + 2 ) * sizeof ( oid )); ++ *length = vp->namelen + 2; ++ *var_len = sizeof ( long ); ++ *write_method = NULL; ++ ++ switch ( vp->magic ) { ++ ++ case DOT11ADDRESS: ++// *write_method = write_dot11Address; ++ MACWork[ 0] = ga->address[ 0]; ++ MACWork[ 1] = ga->address[ 1]; ++ MACWork[ 2] = ga->address[ 3]; ++ MACWork[ 3] = ga->address[ 4]; ++ MACWork[ 4] = ga->address[ 6]; ++ MACWork[ 5] = ga->address[ 7]; ++ MACWork[ 6] = ga->address[ 9]; ++ MACWork[ 7] = ga->address[10]; ++ MACWork[ 8] = ga->address[12]; ++ MACWork[ 9] = ga->address[13]; ++ MACWork[10] = ga->address[15]; ++ MACWork[11] = ga->address[16]; ++ MACWork[12] = '\0'; ++ *var_len = 6; ++ return ( UCHAR * ) htob ( MACWork ); ++ ++ case DOT11GROUPADDRESSESSTATUS: ++// *write_method = write_dot11GroupAddressesStatus; ++ return ( UCHAR * ) &ga->groupAddressesStatus; ++ ++ default: ++ ERROR_MSG ( "" ); ++ } ++ return NULL; ++} ++ ++/**************************************************************************** ++* * ++* var_dot11ResourceInfoTable() - * ++* * ++****************************************************************************/ ++unsigned char * ++var_dot11ResourceInfoTable ( struct variable *vp, ++ oid *name, ++ size_t *length, ++ int exact, ++ size_t *var_len, ++ WriteMethod **write_method ) ++{ ++ int found = FALSE; ++ oid rName [ MAX_OID_LEN ]; // OID to be returned ++ ++ loadTables(); ++ memcpy (( char * ) rName, ( char * ) vp->name, ( int ) vp->namelen * sizeof ( oid )); ++ for ( np = LIST_FIRST ( &riList ); np != NULL; np = LIST_NEXT ( np, nodes )) { ++ ri = ( struct riTbl_data * ) np->data; ++ rName[vp->namelen] = ri->ifIndex; ++ if (( exact && ( snmp_oid_compare ( rName, vp->namelen + 1, name, *length ) == 0 )) || ++ ( !exact && ( snmp_oid_compare ( rName, vp->namelen + 1, name, *length ) > 0 ))) { ++ switch ( vp->magic ) { ++ case DOT11MANUFACTUREROUI: ++ if ( ri->haveManufacturerOUI ) found = TRUE; break; ++ case DOT11MANUFACTURERNAME: ++ if ( ri->haveManufacturerName ) found = TRUE; break; ++ case DOT11MANUFACTURERPRODUCTNAME: ++ if ( ri->haveManufacturerProductName ) found = TRUE; break; ++ case DOT11MANUFACTURERPRODUCTVERSION: ++ if ( ri->haveManufacturerProductVersion ) found = TRUE; break; ++ } ++ } ++ if ( found ) ++ break; ++ } ++ ++ if ( !found ) ++ return NULL; ++ ++ memcpy (( char * ) name, ( char * ) rName, ( vp->namelen + 1 ) * sizeof ( oid )); ++ *length = vp->namelen + 1; ++ *var_len = sizeof ( long ); ++ *write_method = NULL; ++ ++ switch ( vp->magic ) { ++ ++ case DOT11MANUFACTUREROUI: ++ *var_len = strlen ( ri->manufacturerOUI ); ++ return ( UCHAR * ) ri->manufacturerOUI; ++ ++ case DOT11MANUFACTURERNAME: ++ *var_len = strlen ( ri->manufacturerName ); ++ return ( UCHAR * ) ri->manufacturerName; ++ ++ case DOT11MANUFACTURERPRODUCTNAME: ++ *var_len = strlen ( ri->manufacturerProductName ); ++ return ( UCHAR * ) ri->manufacturerProductName; ++ ++ case DOT11MANUFACTURERPRODUCTVERSION: ++ *var_len = strlen ( ri->manufacturerProductVersion ); ++ return ( UCHAR * ) ri->manufacturerProductVersion; ++ ++ default: ++ ERROR_MSG ( "" ); ++ } ++ ++ return NULL; ++} ++ ++/**************************************************************************** ++* * ++* var_dot11PhyOperationTable() - * ++* * ++****************************************************************************/ ++unsigned char * ++var_dot11PhyOperationTable ( struct variable *vp, ++ oid *name, ++ size_t *length, ++ int exact, ++ size_t *var_len, ++ WriteMethod **write_method ) ++{ ++ int found = FALSE; ++ oid rName [ MAX_OID_LEN ]; // OID to be returned ++ ++ loadTables(); ++ memcpy (( char * ) rName, ( char * ) vp->name, ( int ) vp->namelen * sizeof ( oid )); ++ for ( np = LIST_FIRST ( &poList ); np != NULL; np = LIST_NEXT ( np, nodes )) { ++ po = ( struct poTbl_data * ) np->data; ++ rName[vp->namelen] = po->ifIndex; ++ if (( exact && ( snmp_oid_compare ( rName, vp->namelen + 1, name, *length ) == 0 )) || ++ ( !exact && ( snmp_oid_compare ( rName, vp->namelen + 1, name, *length ) > 0 ))) { ++ switch ( vp->magic ) { ++ case DOT11PHYTYPE: ++ if ( po->havePHYType ) found = TRUE; break; ++ case DOT11CURRENTREGDOMAIN: ++ if ( po->haveCurrentRegDomain ) found = TRUE; break; ++ case DOT11TEMPTYPE: ++ if ( po->haveTempType ) found = TRUE; break; ++ } ++ } ++ if ( found ) ++ break; ++ } ++ ++ if ( !found ) ++ return NULL; ++ ++ memcpy (( char * ) name, ( char * ) rName, ( vp->namelen + 1 ) * sizeof ( oid )); ++ *length = vp->namelen + 1; ++ *var_len = sizeof ( long ); ++ *write_method = NULL; ++ ++ switch ( vp->magic ) { ++ ++ case DOT11PHYTYPE: ++ return ( UCHAR * ) &po->PHYType; ++ ++ case DOT11CURRENTREGDOMAIN: ++// *write_method = write_dot11CurrentRegDomain; ++ return ( UCHAR * ) &po->currentRegDomain; ++ ++ case DOT11TEMPTYPE: ++ return ( UCHAR * ) &po->tempType; ++ ++ default: ++ ERROR_MSG ( "" ); ++ } ++ ++ return NULL; ++} ++ ++/**************************************************************************** ++* * ++* var_dot11PhyAntennaTable() - * ++* * ++****************************************************************************/ ++unsigned char * ++var_dot11PhyAntennaTable ( struct variable *vp, ++ oid *name, ++ size_t *length, ++ int exact, ++ size_t *var_len, ++ WriteMethod **write_method ) ++{ ++ int found = FALSE; ++ oid rName [ MAX_OID_LEN ]; // OID to be returned ++ ++ loadTables(); ++ memcpy (( char * ) rName, ( char * ) vp->name, ( int ) vp->namelen * sizeof ( oid )); ++ for ( np = LIST_FIRST ( &paList ); np != NULL; np = LIST_NEXT ( np, nodes )) { ++ pa = ( struct paTbl_data * ) np->data; ++ rName[vp->namelen] = pa->ifIndex; ++ if (( exact && ( snmp_oid_compare ( rName, vp->namelen + 1, name, *length ) == 0 )) || ++ ( !exact && ( snmp_oid_compare ( rName, vp->namelen + 1, name, *length ) > 0 ))) { ++ switch ( vp->magic ) { ++ case DOT11CURRENTTXANTENNA: ++ if ( pa->haveCurrentTxAntenna ) found = TRUE; break; ++ case DOT11DIVERSITYSUPPORT: ++ if ( pa->haveDiversitySupport ) found = TRUE; break; ++ case DOT11CURRENTRXANTENNA: ++ if ( pa->haveCurrentRxAntenna ) found = TRUE; break; ++ } ++ } ++ if ( found ) ++ break; ++ } ++ ++ if ( !found ) ++ return NULL; ++ ++ memcpy (( char * ) name, ( char * ) rName, ( vp->namelen + 1 ) * sizeof ( oid )); ++ *length = vp->namelen + 1; ++ *var_len = sizeof ( long ); ++ *write_method = NULL; ++ ++ switch ( vp->magic ) { ++ ++ case DOT11CURRENTTXANTENNA: ++// *write_method = write_dot11CurrentTxAntenna; ++ return ( UCHAR * ) &pa->currentTxAntenna; ++ ++ case DOT11DIVERSITYSUPPORT: ++ return ( UCHAR * ) &pa->diversitySupport; ++ ++ case DOT11CURRENTRXANTENNA: ++// *write_method = write_dot11CurrentRxAntenna; ++ return ( UCHAR * ) &pa->currentRxAntenna; ++ ++ default: ++ ERROR_MSG ( "" ); ++ } ++ return NULL; ++} ++ ++/**************************************************************************** ++* * ++* var_dot11PhyTxPowerTable() - * ++* * ++****************************************************************************/ ++unsigned char * ++var_dot11PhyTxPowerTable ( struct variable *vp, ++ oid *name, ++ size_t *length, ++ int exact, ++ size_t *var_len, ++ WriteMethod **write_method ) ++{ ++ int found = FALSE; ++ oid rName [ MAX_OID_LEN ]; // OID to be returned ++ ++ loadTables(); ++ memcpy (( char * ) rName, ( char * ) vp->name, ( int ) vp->namelen * sizeof ( oid )); ++ for ( np = LIST_FIRST ( &ptList ); np != NULL; np = LIST_NEXT ( np, nodes )) { ++ pt = ( struct ptTbl_data * ) np->data; ++ rName[vp->namelen] = pt->ifIndex; ++ if (( exact && ( snmp_oid_compare ( rName, vp->namelen + 1, name, *length ) == 0 )) || ++ ( !exact && ( snmp_oid_compare ( rName, vp->namelen + 1, name, *length ) > 0 ))) { ++ switch ( vp->magic ) { ++ case DOT11NUMBERSUPPORTEDPOWERLEVELS: ++ if ( pt->haveNumberSupportedPowerLevels ) found = TRUE; break; ++ case DOT11TXPOWERLEVEL1: ++ if ( pt->haveTxPowerLevel1 ) found = TRUE; break; ++ case DOT11TXPOWERLEVEL2: ++ if ( pt->haveTxPowerLevel2 ) found = TRUE; break; ++ case DOT11TXPOWERLEVEL3: ++ if ( pt->haveTxPowerLevel3 ) found = TRUE; break; ++ case DOT11TXPOWERLEVEL4: ++ if ( pt->haveTxPowerLevel4 ) found = TRUE; break; ++ case DOT11TXPOWERLEVEL5: ++ if ( pt->haveTxPowerLevel5 ) found = TRUE; break; ++ case DOT11TXPOWERLEVEL6: ++ if ( pt->haveTxPowerLevel6 ) found = TRUE; break; ++ case DOT11TXPOWERLEVEL7: ++ if ( pt->haveTxPowerLevel7 ) found = TRUE; break; ++ case DOT11TXPOWERLEVEL8: ++ if ( pt->haveTxPowerLevel8 ) found = TRUE; break; ++ case DOT11CURRENTTXPOWERLEVEL: ++ if ( pt->currentTxPowerLevel ) found = TRUE; break; ++ } ++ } ++ if ( found ) ++ break; ++ } ++ ++ if ( !found ) ++ return NULL; ++ ++ memcpy (( char * ) name, ( char * ) rName, ( vp->namelen + 1 ) * sizeof ( oid )); ++ *length = vp->namelen + 1; ++ *var_len = sizeof ( long ); ++ *write_method = NULL; ++ ++ switch ( vp->magic ) { ++ ++ case DOT11NUMBERSUPPORTEDPOWERLEVELS: ++ return ( UCHAR * ) &pt->numberSupportedPowerLevels; ++ ++ case DOT11TXPOWERLEVEL1: return ( UCHAR * ) &pt->TxPowerLevel1; ++ case DOT11TXPOWERLEVEL2: return ( UCHAR * ) &pt->TxPowerLevel2; ++ case DOT11TXPOWERLEVEL3: return ( UCHAR * ) &pt->TxPowerLevel3; ++ case DOT11TXPOWERLEVEL4: return ( UCHAR * ) &pt->TxPowerLevel4; ++ case DOT11TXPOWERLEVEL5: return ( UCHAR * ) &pt->TxPowerLevel5; ++ case DOT11TXPOWERLEVEL6: return ( UCHAR * ) &pt->TxPowerLevel6; ++ case DOT11TXPOWERLEVEL7: return ( UCHAR * ) &pt->TxPowerLevel7; ++ case DOT11TXPOWERLEVEL8: return ( UCHAR * ) &pt->TxPowerLevel8; ++ ++ case DOT11CURRENTTXPOWERLEVEL: ++// *write_method = write_dot11CurrentTxPowerLevel; ++ return ( UCHAR * ) &pt->currentTxPowerLevel; ++ ++ default: ++ ERROR_MSG ( "" ); ++ } ++ ++ return NULL; ++} ++ ++/**************************************************************************** ++* * ++* var_dot11PhyFHSSTable() - * ++* * ++****************************************************************************/ ++unsigned char * ++var_dot11PhyFHSSTable ( struct variable *vp, ++ oid *name, ++ size_t *length, ++ int exact, ++ size_t *var_len, ++ WriteMethod **write_method ) ++{ ++ int found = FALSE; ++ oid rName [ MAX_OID_LEN ]; // OID to be returned ++ ++ loadTables(); ++ memcpy (( char * ) rName, ( char * ) vp->name, ( int ) vp->namelen * sizeof ( oid )); ++ for ( np = LIST_FIRST ( &pfList ); np != NULL; np = LIST_NEXT ( np, nodes )) { ++ pf = ( struct pfTbl_data * ) np->data; ++ rName[vp->namelen] = pf->ifIndex; ++ if (( exact && ( snmp_oid_compare ( rName, vp->namelen + 1, name, *length ) == 0 )) || ++ ( !exact && ( snmp_oid_compare ( rName, vp->namelen + 1, name, *length ) > 0 ))) { ++ switch ( vp->magic ) { ++ case DOT11HOPTIME: ++ if ( pf->haveHopTime ) found = TRUE; break; ++ case DOT11CURRENTCHANNELNUMBER: ++ if ( pf->haveCurrentChannelNumber ) found = TRUE; break; ++ case DOT11MAXDWELLTIME: ++ if ( pf->haveMaxDwellTime ) found = TRUE; break; ++ case DOT11CURRENTDWELLTIME: ++ if ( pf->haveCurrentDwellTime ) found = TRUE; break; ++ case DOT11CURRENTSET: ++ if ( pf->haveCurrentSet ) found = TRUE; break; ++ case DOT11CURRENTPATTERN: ++ if ( pf->haveCurrentPattern ) found = TRUE; break; ++ case DOT11CURRENTINDEX: ++ if ( pf->haveCurrentIndex ) found = TRUE; break; ++ } ++ } ++ if ( found ) ++ break; ++ } ++ ++ if ( !found ) ++ return NULL; ++ ++ memcpy (( char * ) name, ( char * ) rName, ( vp->namelen + 1 ) * sizeof ( oid )); ++ *length = vp->namelen + 1; ++ *var_len = sizeof ( long ); ++ *write_method = NULL; ++ ++ switch ( vp->magic ) { ++ ++ case DOT11HOPTIME: ++ return ( UCHAR * ) &pf->hopTime; ++ ++ case DOT11CURRENTCHANNELNUMBER: ++// *write_method = write_dot11CurrentChannelNumber; ++ return ( UCHAR * ) &pf->currentChannelNumber; ++ ++ case DOT11MAXDWELLTIME: ++ return ( UCHAR * ) &pf->maxDwellTime; ++ ++ case DOT11CURRENTDWELLTIME: ++// *write_method = write_dot11CurrentDwellTime; ++ return ( UCHAR * ) &pf->currentDwellTime; ++ ++ case DOT11CURRENTSET: ++// *write_method = write_dot11CurrentSet; ++ return ( UCHAR * ) &pf->currentSet; ++ ++ case DOT11CURRENTPATTERN: ++// *write_method = write_dot11CurrentPattern; ++ return ( UCHAR * ) &pf->currentPattern; ++ ++ case DOT11CURRENTINDEX: ++// *write_method = write_dot11CurrentIndex; ++ return ( UCHAR * ) &pf->currentIndex; ++ ++ default: ++ ERROR_MSG ( "" ); ++ } ++ ++ return NULL; ++} ++ ++/**************************************************************************** ++* * ++* var_dot11PhyDSSSTable() - * ++* * ++****************************************************************************/ ++unsigned char * ++var_dot11PhyDSSSTable ( struct variable *vp, ++ oid *name, ++ size_t *length, ++ int exact, ++ size_t *var_len, ++ WriteMethod **write_method ) ++{ ++ int found = FALSE; ++ oid rName [ MAX_OID_LEN ]; // OID to be returned ++ ++ loadTables(); ++ memcpy (( char * ) rName, ( char * ) vp->name, ( int ) vp->namelen * sizeof ( oid )); ++ for ( np = LIST_FIRST ( &pdList ); np != NULL; np = LIST_NEXT ( np, nodes )) { ++ pd = ( struct pdTbl_data * ) np->data; ++ rName[vp->namelen] = pd->ifIndex; ++ if (( exact && ( snmp_oid_compare ( rName, vp->namelen + 1, name, *length ) == 0 )) || ++ ( !exact && ( snmp_oid_compare ( rName, vp->namelen + 1, name, *length ) > 0 ))) { ++ switch ( vp->magic ) { ++ case DOT11CURRENTCHANNEL: ++ if ( pd->haveCurrentChannel ) found = TRUE; break; ++ case DOT11CCAMODESUPPORTED: ++ if ( pd->haveCCAModeSupported ) found = TRUE; break; ++ case DOT11CURRENTCCAMODE: ++ if ( pd->haveCurrentCCAMode ) found = TRUE; break; ++ case DOT11EDTHRESHOLD: ++ if ( pd->haveEDThreshold ) found = TRUE; break; ++ } ++ } ++ if ( found ) ++ break; ++ } ++ ++ if ( !found ) ++ return NULL; ++ ++ memcpy (( char * ) name, ( char * ) rName, ( vp->namelen + 1 ) * sizeof ( oid )); ++ *length = vp->namelen + 1; ++ *var_len = sizeof ( long ); ++ *write_method = NULL; ++ ++ switch ( vp->magic ) { ++ ++ case DOT11CURRENTCHANNEL: ++// *write_method = write_dot11CurrentChannel; ++ return ( UCHAR * ) &pd->currentChannel; ++ ++ case DOT11CCAMODESUPPORTED: ++ return ( UCHAR * ) &pd->CCAModeSupported; ++ ++ case DOT11CURRENTCCAMODE: ++// *write_method = write_dot11CurrentCCAMode; ++ return ( UCHAR * ) &pd->currentCCAMode; ++ ++ case DOT11EDTHRESHOLD: ++// *write_method = write_dot11EDThreshold; ++ return ( UCHAR * ) &pd->EDThreshold; ++ ++ default: ++ ERROR_MSG ( "" ); ++ } ++ ++ return NULL; ++} ++ ++/**************************************************************************** ++* * ++* var_dot11PhyIRTable() - * ++* * ++****************************************************************************/ ++unsigned char * ++var_dot11PhyIRTable ( struct variable *vp, ++ oid *name, ++ size_t *length, ++ int exact, ++ size_t *var_len, ++ WriteMethod **write_method) ++{ ++ ++ int found = FALSE; ++ oid rName [ MAX_OID_LEN ]; // OID to be returned ++ ++ loadTables(); ++ memcpy (( char * ) rName, ( char * ) vp->name, ( int ) vp->namelen * sizeof ( oid )); ++ for ( np = LIST_FIRST ( &piList ); np != NULL; np = LIST_NEXT ( np, nodes )) { ++ pi = ( struct piTbl_data * ) np->data; ++ rName[vp->namelen] = pi->ifIndex; ++ if (( exact && ( snmp_oid_compare ( rName, vp->namelen + 1, name, *length ) == 0 )) || ++ ( !exact && ( snmp_oid_compare ( rName, vp->namelen + 1, name, *length ) > 0 ))) { ++ switch ( vp->magic ) { ++ case DOT11CCAWATCHDOGTIMERMAX: ++ if ( pi->CCAWatchdogTimerMax ) found = TRUE; break; ++ case DOT11CCAWATCHDOGCOUNTMAX: ++ if ( pi->CCAWatchdogCountMax ) found = TRUE; break; ++ case DOT11CCAWATCHDOGTIMERMIN: ++ if ( pi->CCAWatchdogTimerMin ) found = TRUE; break; ++ case DOT11CCAWATCHDOGCOUNTMIN: ++ if ( pi->CCAWatchdogCountMin ) found = TRUE; break; ++ } ++ } ++ if ( found ) ++ break; ++ } ++ ++ if ( !found ) ++ return NULL; ++ ++ memcpy (( char * ) name, ( char * ) rName, ( vp->namelen + 1 ) * sizeof ( oid )); ++ *length = vp->namelen + 1; ++ *var_len = sizeof ( long ); ++ *write_method = NULL; ++ ++ switch ( vp->magic ) { ++ ++ case DOT11CCAWATCHDOGTIMERMAX: ++// *write_method = write_dot11CCAWatchdogTimerMax; ++ return ( UCHAR * ) &pi->CCAWatchdogTimerMax; ++ ++ case DOT11CCAWATCHDOGCOUNTMAX: ++// *write_method = write_dot11CCAWatchdogCountMax; ++ return ( UCHAR * ) &pi->CCAWatchdogCountMax; ++ ++ case DOT11CCAWATCHDOGTIMERMIN: ++// *write_method = write_dot11CCAWatchdogTimerMin; ++ return ( UCHAR * ) &pi->CCAWatchdogTimerMin; ++ ++ case DOT11CCAWATCHDOGCOUNTMIN: ++// *write_method = write_dot11CCAWatchdogCountMin; ++ return ( UCHAR * ) &pi->CCAWatchdogCountMin; ++ ++ default: ++ ERROR_MSG ( "" ); ++ } ++ ++ return NULL; ++} ++ ++/**************************************************************************** ++* * ++* var_dot11RegDomainsSupportedTable() - * ++* * ++****************************************************************************/ ++unsigned char * ++var_dot11RegDomainsSupportedTable ( struct variable *vp, ++ oid *name, ++ size_t *length, ++ int exact, ++ size_t *var_len, ++ WriteMethod **write_method) ++{ ++ int found = FALSE; ++ oid rName [ MAX_OID_LEN ]; // OID to be returned ++ ++ loadTables(); ++ memcpy (( char * ) rName, ( char * ) vp->name, ( int ) vp->namelen * sizeof ( oid )); ++ for ( np = LIST_FIRST ( &rdList ); np != NULL; np = LIST_NEXT ( np, nodes )) { ++ rd = ( struct rdTbl_data * ) np->data; ++ rName[vp->namelen + 0] = rd->ifIndex; ++ rName[vp->namelen + 1] = rd->regDomainsSupportIndex; ++ if (( exact && ( snmp_oid_compare ( rName, vp->namelen + 2, name, *length ) == 0 )) || ++ ( !exact && ( snmp_oid_compare ( rName, vp->namelen + 2, name, *length ) > 0 ))) { ++ switch ( vp->magic ) { ++ case DOT11REGDOMAINSSUPPORTVALUE: ++ if ( rd->haveRegDomainsSupportValue ) found = TRUE; break; ++ } ++ } ++ if ( found ) ++ break; ++ } ++ ++ if ( !found ) ++ return NULL; ++ ++ memcpy (( char * ) name, ( char * ) rName, ( vp->namelen + 2 ) * sizeof ( oid )); ++ *length = vp->namelen + 2; ++ *var_len = sizeof ( long ); ++ *write_method = NULL; ++ ++ switch ( vp->magic ) { ++ ++ case DOT11REGDOMAINSSUPPORTVALUE: ++ return ( UCHAR * ) &rd->regDomainsSupportValue; ++ ++ default: ++ ERROR_MSG ( "" ); ++ } ++ ++ return NULL; ++} ++ ++/**************************************************************************** ++* * ++* var_dot11AntennasListTable() - * ++* * ++****************************************************************************/ ++unsigned char * ++var_dot11AntennasListTable(struct variable *vp, ++ oid *name, ++ size_t *length, ++ int exact, ++ size_t *var_len, ++ WriteMethod **write_method) ++{ ++ int found = FALSE; ++ oid rName [ MAX_OID_LEN ]; // OID to be returned ++ ++ loadTables(); ++ memcpy (( char * ) rName, ( char * ) vp->name, ( int ) vp->namelen * sizeof ( oid )); ++ for ( np = LIST_FIRST ( &alList ); np != NULL; np = LIST_NEXT ( np, nodes )) { ++ al = ( struct alTbl_data * ) np->data; ++ rName[vp->namelen + 0] = al->ifIndex; ++ rName[vp->namelen + 1] = al->antennaListIndex; ++ if (( exact && ( snmp_oid_compare ( rName, vp->namelen + 2, name, *length ) == 0 )) || ++ ( !exact && ( snmp_oid_compare ( rName, vp->namelen + 2, name, *length ) > 0 ))) { ++ switch ( vp->magic ) { ++ case DOT11SUPPORTEDTXANTENNA: ++ if ( al->haveSupportedTxAntenna ) found = TRUE; break; ++ case DOT11SUPPORTEDRXANTENNA: ++ if ( al->haveSupportedRxAntenna ) found = TRUE; break; ++ case DOT11DIVERSITYSELECTIONRX: ++ if ( al->haveDiversitySelectionRx ) found = TRUE; break; ++ } ++ } ++ if ( found ) ++ break; ++ } ++ ++ if ( !found ) ++ return NULL; ++ ++ memcpy (( char * ) name, ( char * ) rName, ( vp->namelen + 2 ) * sizeof ( oid )); ++ *length = vp->namelen + 2; ++ *var_len = sizeof ( long ); ++ *write_method = NULL; ++ ++ switch ( vp->magic ) { ++ ++ case DOT11SUPPORTEDTXANTENNA: ++// *write_method = write_dot11SupportedTxAntenna; ++ return ( UCHAR * ) &al->supportedTxAntenna; ++ ++ case DOT11SUPPORTEDRXANTENNA: ++// *write_method = write_dot11SupportedRxAntenna; ++ return ( UCHAR * ) &al->supportedRxAntenna; ++ ++ case DOT11DIVERSITYSELECTIONRX: ++// *write_method = write_dot11DiversitySelectionRx; ++ return ( UCHAR * ) &al->diversitySelectionRx; ++ ++ default: ++ ERROR_MSG ( "" ); ++ } ++ ++ return NULL; ++} ++ ++/**************************************************************************** ++* * ++* var_dot11SupportedDataRatesTxTable() - * ++* * ++****************************************************************************/ ++unsigned char * ++var_dot11SupportedDataRatesTxTable ( struct variable *vp, ++ oid *name, ++ size_t *length, ++ int exact, ++ size_t *var_len, ++ WriteMethod **write_method ) ++{ ++ int found = FALSE; ++ oid rName [ MAX_OID_LEN ]; // OID to be returned ++ ++ loadTables(); ++ memcpy (( char * ) rName, ( char * ) vp->name, ( int ) vp->namelen * sizeof ( oid )); ++ for ( np = LIST_FIRST ( &rtList ); np != NULL; np = LIST_NEXT ( np, nodes )) { ++ rt = ( struct rtTbl_data * ) np->data; ++ rName[vp->namelen + 0] = rt->ifIndex; ++ rName[vp->namelen + 1] = rt->supportedDataRatesTxIndex; ++ if (( exact && ( snmp_oid_compare ( rName, vp->namelen + 2, name, *length ) == 0 )) || ++ ( !exact && ( snmp_oid_compare ( rName, vp->namelen + 2, name, *length ) > 0 ))) { ++ switch ( vp->magic ) { ++ case DOT11SUPPORTEDDATARATESTXVALUE: ++ if ( rt->haveSupportedDataRatesTxValue ) found = TRUE; break; ++ } ++ } ++ if ( found ) ++ break; ++ } ++ ++ if ( !found ) ++ return NULL; ++ ++ memcpy (( char * ) name, ( char * ) rName, ( vp->namelen + 2 ) * sizeof ( oid )); ++ *length = vp->namelen + 2; ++ *var_len = sizeof ( long ); ++ *write_method = NULL; ++ ++ switch ( vp->magic ) { ++ ++ case DOT11SUPPORTEDDATARATESTXVALUE: ++ return ( UCHAR * ) &rt->supportedDataRatesTxValue; ++ ++ default: ++ ERROR_MSG ( "" ); ++ } ++ ++ return NULL; ++} ++ ++/**************************************************************************** ++* * ++* var_dot11SupportedDataRatesRxTable() - * ++* * ++****************************************************************************/ ++unsigned char * ++var_dot11SupportedDataRatesRxTable ( struct variable *vp, ++ oid *name, ++ size_t *length, ++ int exact, ++ size_t *var_len, ++ WriteMethod **write_method ) ++{ ++ int found = FALSE; ++ oid rName [ MAX_OID_LEN ]; // OID to be returned ++ ++ loadTables(); ++ memcpy (( char * ) rName, ( char * ) vp->name, ( int ) vp->namelen * sizeof ( oid )); ++ for ( np = LIST_FIRST ( &rrList ); np != NULL; np = LIST_NEXT ( np, nodes )) { ++ rr = ( struct rrTbl_data * ) np->data; ++ rName[vp->namelen + 0] = rr->ifIndex; ++ rName[vp->namelen + 1] = rr->supportedDataRatesRxIndex; ++ if (( exact && ( snmp_oid_compare ( rName, vp->namelen + 2, name, *length ) == 0 )) || ++ ( !exact && ( snmp_oid_compare ( rName, vp->namelen + 2, name, *length ) > 0 ))) { ++ switch ( vp->magic ) { ++ case DOT11SUPPORTEDDATARATESRXVALUE: ++ if ( rr->haveSupportedDataRatesRxValue ) found = TRUE; break; ++ } ++ } ++ if ( found ) ++ break; ++ } ++ ++ if ( !found ) ++ return NULL; ++ ++ memcpy (( char * ) name, ( char * ) rName, ( vp->namelen + 2 ) * sizeof ( oid )); ++ *length = vp->namelen + 2; ++ *var_len = sizeof ( long ); ++ *write_method = NULL; ++ ++ switch ( vp->magic ) { ++ ++ case DOT11SUPPORTEDDATARATESRXVALUE: ++ return ( UCHAR * ) &rr->supportedDataRatesRxValue; ++ ++ default: ++ ERROR_MSG ( "" ); ++ } ++ ++ return NULL; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11StationID(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static unsigned char string[SPRINT_MAX_LEN]; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_OCTET_STR ) { ++ fprintf ( stderr, "write to dot11StationID not ASN_OCTET_STR\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( string )) { ++ fprintf ( stderr,"write to dot11StationID: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11MediumOccupancyLimit(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static long *long_ret; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_INTEGER ) { ++ fprintf ( stderr, "write to dot11MediumOccupancyLimit not ASN_INTEGER\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( long_ret )){ ++ fprintf ( stderr,"write to dot11MediumOccupancyLimit: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11CFPPeriod(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static long *long_ret; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_INTEGER ) { ++ fprintf ( stderr, "write to dot11CFPPeriod not ASN_INTEGER\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( long_ret )){ ++ fprintf ( stderr, "write to dot11CFPPeriod: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11CFPMaxDuration(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static long *long_ret; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_INTEGER ) { ++ fprintf ( stderr, "write to dot11CFPMaxDuration not ASN_INTEGER\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( long_ret )){ ++ fprintf ( stderr, "write to dot11CFPMaxDuration: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11AuthenticationResponseTimeOut(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static long *long_ret; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_INTEGER ) { ++ fprintf ( stderr, "write to dot11AuthenticationResponseTimeOut not ASN_INTEGER\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( long_ret )){ ++ fprintf ( stderr, "write to dot11AuthenticationResponseTimeOut: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11PowerManagementMode(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static long *long_ret; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_INTEGER ) { ++ fprintf ( stderr, "write to dot11PowerManagementMode not ASN_INTEGER\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( long_ret )) { ++ fprintf ( stderr, "write to dot11PowerManagementMode: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11DesiredSSID(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static unsigned char string[SPRINT_MAX_LEN]; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_OCTET_STR ) { ++ fprintf ( stderr, "write to dot11DesiredSSID not ASN_OCTET_STR\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( string )){ ++ fprintf ( stderr, "write to dot11DesiredSSID: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11DesiredBSSType(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static long *long_ret; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_INTEGER ) { ++ fprintf ( stderr, "write to dot11DesiredBSSType not ASN_INTEGER\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( long_ret )){ ++ fprintf ( stderr, "write to dot11DesiredBSSType: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11OperationalRateSet(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static unsigned char string[SPRINT_MAX_LEN]; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_OCTET_STR ) { ++ fprintf ( stderr, "write to dot11OperationalRateSet not ASN_OCTET_STR\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( string )){ ++ fprintf ( stderr, "write to dot11OperationalRateSet: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11BeaconPeriod(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static long *long_ret; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_INTEGER ) { ++ fprintf ( stderr, "write to dot11BeaconPeriod not ASN_INTEGER\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( long_ret )){ ++ fprintf ( stderr,"write to dot11BeaconPeriod: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11DTIMPeriod(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static long *long_ret; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_INTEGER ) { ++ fprintf ( stderr, "write to dot11DTIMPeriod not ASN_INTEGER\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( long_ret )){ ++ fprintf ( stderr,"write to dot11DTIMPeriod: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11AssociationResponseTimeOut(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static long *long_ret; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_INTEGER ) { ++ fprintf ( stderr, "write to dot11AssociationResponseTimeOut not ASN_INTEGER\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( long_ret )) { ++ fprintf ( stderr,"write to dot11AssociationResponseTimeOut: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11AuthenticationAlgorithmsEnable(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static long *long_ret; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_INTEGER ) { ++ fprintf ( stderr, "write to dot11AuthenticationAlgorithmsEnable not ASN_INTEGER\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( long_ret )){ ++ fprintf ( stderr,"write to dot11AuthenticationAlgorithmsEnable: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11WEPDefaultKeyValue(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static unsigned char string[SPRINT_MAX_LEN]; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_OCTET_STR ) { ++ fprintf ( stderr, "write to dot11WEPDefaultKeyValue not ASN_OCTET_STR\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( string )){ ++ fprintf ( stderr,"write to dot11WEPDefaultKeyValue: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11WEPKeyMappingAddress(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static unsigned char string[SPRINT_MAX_LEN]; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_OCTET_STR ) { ++ fprintf ( stderr, "write to dot11WEPKeyMappingAddress not ASN_OCTET_STR\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( string )) { ++ fprintf ( stderr,"write to dot11WEPKeyMappingAddress: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11WEPKeyMappingWEPOn(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static long *long_ret; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_INTEGER ) { ++ fprintf ( stderr, "write to dot11WEPKeyMappingWEPOn not ASN_INTEGER\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( long_ret )){ ++ fprintf ( stderr, "write to dot11WEPKeyMappingWEPOn: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11WEPKeyMappingValue(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static unsigned char string[SPRINT_MAX_LEN]; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_OCTET_STR ) { ++ fprintf ( stderr, "write to dot11WEPKeyMappingValue not ASN_OCTET_STR\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( string )) { ++ fprintf ( stderr, "write to dot11WEPKeyMappingValue: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11WEPKeyMappingStatus(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static long *long_ret; ++ int size; ++ ++ switch ( action ) { ++ case RESERVE1: ++ if ( var_val_type != ASN_INTEGER ) { ++ fprintf ( stderr, "write to dot11WEPKeyMappingStatus not ASN_INTEGER\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( long_ret )){ ++ fprintf ( stderr, "write to dot11WEPKeyMappingStatus: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11PrivacyInvoked(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static long *long_ret; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_INTEGER ) { ++ fprintf ( stderr, "write to dot11PrivacyInvoked not ASN_INTEGER\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( long_ret )){ ++ fprintf ( stderr, "write to dot11PrivacyInvoked: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11WEPDefaultKeyID(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static long *long_ret; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_INTEGER ) { ++ fprintf ( stderr, "write to dot11WEPDefaultKeyID not ASN_INTEGER\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( long_ret )){ ++ fprintf ( stderr, "write to dot11WEPDefaultKeyID: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11WEPKeyMappingLength(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static long *long_ret; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_INTEGER ) { ++ fprintf ( stderr, "write to dot11WEPKeyMappingLength not ASN_INTEGER\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( long_ret )){ ++ fprintf ( stderr, "write to dot11WEPKeyMappingLength: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11ExcludeUnencrypted(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static long *long_ret; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_INTEGER ) { ++ fprintf ( stderr, "write to dot11ExcludeUnencrypted not ASN_INTEGER\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( long_ret )){ ++ fprintf ( stderr,"write to dot11ExcludeUnencrypted: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11RTSThreshold(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static long *long_ret; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_INTEGER ){ ++ fprintf ( stderr, "write to dot11RTSThreshold not ASN_INTEGER\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( long_ret )){ ++ fprintf ( stderr, "write to dot11RTSThreshold: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11ShortRetryLimit(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static long *long_ret; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_INTEGER ) { ++ fprintf ( stderr, "write to dot11ShortRetryLimit not ASN_INTEGER\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( long_ret )){ ++ fprintf ( stderr, "write to dot11ShortRetryLimit: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11LongRetryLimit(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static long *long_ret; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_INTEGER ) { ++ fprintf ( stderr, "write to dot11LongRetryLimit not ASN_INTEGER\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( long_ret )){ ++ fprintf ( stderr,"write to dot11LongRetryLimit: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11FragmentationThreshold(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static long *long_ret; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_INTEGER ) { ++ fprintf ( stderr, "write to dot11FragmentationThreshold not ASN_INTEGER\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( long_ret )){ ++ fprintf ( stderr,"write to dot11FragmentationThreshold: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11MaxTransmitMSDULifetime(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static long *long_ret; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_INTEGER ) { ++ fprintf ( stderr, "write to dot11MaxTransmitMSDULifetime not ASN_INTEGER\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( long_ret )){ ++ fprintf ( stderr, "write to dot11MaxTransmitMSDULifetime: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11MaxReceiveLifetime(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static long *long_ret; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_INTEGER ) { ++ fprintf ( stderr, "write to dot11MaxReceiveLifetime not ASN_INTEGER\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( long_ret )){ ++ fprintf ( stderr, "write to dot11MaxReceiveLifetime: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11Address(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static unsigned char string[SPRINT_MAX_LEN]; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_OCTET_STR ) { ++ fprintf ( stderr, "write to dot11Address not ASN_OCTET_STR\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( string )){ ++ fprintf ( stderr, "write to dot11Address: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11GroupAddressesStatus(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static long *long_ret; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_INTEGER ) { ++ fprintf ( stderr, "write to dot11GroupAddressesStatus not ASN_INTEGER\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( long_ret )){ ++ fprintf ( stderr,"write to dot11GroupAddressesStatus: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11CurrentRegDomain(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static long *long_ret; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_INTEGER ) { ++ fprintf ( stderr, "write to dot11CurrentRegDomain not ASN_INTEGER\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( long_ret )){ ++ fprintf ( stderr, "write to dot11CurrentRegDomain: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11CurrentTxAntenna(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static long *long_ret; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_INTEGER ) { ++ fprintf ( stderr, "write to dot11CurrentTxAntenna not ASN_INTEGER\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( long_ret )){ ++ fprintf ( stderr, "write to dot11CurrentTxAntenna: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11CurrentRxAntenna(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static long *long_ret; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_INTEGER ) { ++ fprintf ( stderr, "write to dot11CurrentRxAntenna not ASN_INTEGER\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( long_ret )){ ++ fprintf ( stderr,"write to dot11CurrentRxAntenna: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11CurrentTxPowerLevel(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static long *long_ret; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_INTEGER ) { ++ fprintf ( stderr, "write to dot11CurrentTxPowerLevel not ASN_INTEGER\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( long_ret )){ ++ fprintf ( stderr, "write to dot11CurrentTxPowerLevel: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11CurrentChannelNumber(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static long *long_ret; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_INTEGER ) { ++ fprintf ( stderr, "write to dot11CurrentChannelNumber not ASN_INTEGER\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( long_ret )){ ++ fprintf ( stderr,"write to dot11CurrentChannelNumber: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11CurrentDwellTime(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static long *long_ret; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_INTEGER ) { ++ fprintf ( stderr, "write to dot11CurrentDwellTime not ASN_INTEGER\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( long_ret )){ ++ fprintf ( stderr, "write to dot11CurrentDwellTime: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11CurrentSet(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static long *long_ret; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_INTEGER ) { ++ fprintf ( stderr, "write to dot11CurrentSet not ASN_INTEGER\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( long_ret )){ ++ fprintf ( stderr, "write to dot11CurrentSet: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11CurrentPattern(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static long *long_ret; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_INTEGER ) { ++ fprintf ( stderr, "write to dot11CurrentPattern not ASN_INTEGER\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( long_ret )){ ++ fprintf ( stderr, "write to dot11CurrentPattern: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11CurrentIndex(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static long *long_ret; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_INTEGER ) { ++ fprintf ( stderr, "write to dot11CurrentIndex not ASN_INTEGER\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( long_ret )){ ++ fprintf ( stderr, "write to dot11CurrentIndex: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11CurrentChannel(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static long *long_ret; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_INTEGER ) { ++ fprintf ( stderr, "write to dot11CurrentChannel not ASN_INTEGER\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( long_ret )){ ++ fprintf ( stderr, "write to dot11CurrentChannel: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11CurrentCCAMode(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static long *long_ret; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_INTEGER ) { ++ fprintf ( stderr, "write to dot11CurrentCCAMode not ASN_INTEGER\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( long_ret )){ ++ fprintf ( stderr,"write to dot11CurrentCCAMode: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11EDThreshold(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static long *long_ret; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_INTEGER ) { ++ fprintf ( stderr, "write to dot11EDThreshold not ASN_INTEGER\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( long_ret )){ ++ fprintf ( stderr, "write to dot11EDThreshold: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11CCAWatchdogTimerMax(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static long *long_ret; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_INTEGER ) { ++ fprintf ( stderr, "write to dot11CCAWatchdogTimerMax not ASN_INTEGER\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( long_ret )){ ++ fprintf ( stderr, "write to dot11CCAWatchdogTimerMax: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11CCAWatchdogCountMax(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static long *long_ret; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_INTEGER ) { ++ fprintf ( stderr, "write to dot11CCAWatchdogCountMax not ASN_INTEGER\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( long_ret )){ ++ fprintf ( stderr, "write to dot11CCAWatchdogCountMax: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11CCAWatchdogTimerMin(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static long *long_ret; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_INTEGER ) { ++ fprintf ( stderr, "write to dot11CCAWatchdogTimerMin not ASN_INTEGER\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( long_ret )){ ++ fprintf ( stderr, "write to dot11CCAWatchdogTimerMin: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11CCAWatchdogCountMin(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static long *long_ret; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_INTEGER ) { ++ fprintf ( stderr, "write to dot11CCAWatchdogCountMin not ASN_INTEGER\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( long_ret )){ ++ fprintf ( stderr, "write to dot11CCAWatchdogCountMin: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11SupportedTxAntenna(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static long *long_ret; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_INTEGER ) { ++ fprintf ( stderr, "write to dot11SupportedTxAntenna not ASN_INTEGER\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( long_ret )){ ++ fprintf ( stderr, "write to dot11SupportedTxAntenna: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11SupportedRxAntenna(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static long *long_ret; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_INTEGER ) { ++ fprintf ( stderr, "write to dot11SupportedRxAntenna not ASN_INTEGER\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( long_ret )){ ++ fprintf ( stderr,"write to dot11SupportedRxAntenna: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++int ++write_dot11DiversitySelectionRx(int action, ++ u_char *var_val, ++ u_char var_val_type, ++ size_t var_val_len, ++ u_char *statP, ++ oid *name, ++ size_t name_len) ++{ ++ static long *long_ret; ++ int size; ++ ++ switch ( action ) { ++ ++ case RESERVE1: ++ if ( var_val_type != ASN_INTEGER ) { ++ fprintf ( stderr, "write to dot11DiversitySelectionRx not ASN_INTEGER\n" ); ++ return SNMP_ERR_WRONGTYPE; ++ } ++ if ( var_val_len > sizeof ( long_ret )){ ++ fprintf ( stderr, "write to dot11DiversitySelectionRx: bad length\n" ); ++ return SNMP_ERR_WRONGLENGTH; ++ } ++ break; ++ ++ case RESERVE2: ++ case FREE: ++ case ACTION: ++ case UNDO: ++ break; ++ ++ case COMMIT: ++ break; ++ } ++ ++ return SNMP_ERR_NOERROR; ++} ++ ++/**************************************************************************** ++* * ++* loadTables() - Load the Tables * ++* * ++****************************************************************************/ ++static void loadTables() ++{ ++ int skfd; // generic raw socket desc ++ struct iwreq wrq; // ioctl request structure ++ struct ifreq ifr; ++ struct timeval et; // elapsed time ++ struct wireless_info info; // workarea for wireless ioctl information ++ FILE *fp; ++ char bfr[1024], ifName[1024]; ++ char *s, *t; ++ ++ gettimeofday ( &et, ( struct timezone * ) 0 ); // get time-of-day ++ if ( et.tv_sec < lastLoad + MINLOADFREQ ) // only reload so often ++ return; ++ lastLoad = et.tv_sec; ++ ++ skfd = openSocket(); // open socket ++ if ( skfd < 0 ) { ++ syslog ( LOG_ERR, "SNMP ieee802dot11.loadTables() - %s\n", "socket open failure" ); ++ return; ++ } ++ ++ flushLists(); ++ ++ // find interfaces in /proc/net/dev and find the wireless interfaces ++ fp = fopen ( PROC_NET_DEV, "r" ); ++ if ( fp ) { ++ while ( fgets ( bfr, sizeof ( bfr ), fp )) { ++ if ( strstr ( bfr, ":" )) { ++ s = bfr; t = ifName; ++ while ( isspace ( *s )) // discard white space ++ *s++; ++ while ( *s != ':' ) // get interface name ++ *t++ = *s++; ++ *t = '\0'; ++ ++ // verify as a wireless device ++ memset (( char * ) &info, 0, sizeof ( struct wireless_info )); ++ strncpy ( wrq.ifr_name, ifName, IFNAMSIZ ); ++ if ( ioctl ( skfd, SIOCGIWNAME, &wrq ) >= 0 ) { ++ printf ( "%s ifName: %s\n", "loadTables() -", ifName ); ++ initStructs(); ++ loadWiExt( skfd, ifName, &info ); ++ displayWiExt ( info ); ++ load80211Structs ( skfd, ifName, &info ); ++ } ++ } ++ } ++ fclose ( fp ); ++ } ++ ++ close ( skfd ); ++} ++ ++/**************************************************************************** ++* * ++* load80211Structs() - load the 802.11 structures * ++* * ++****************************************************************************/ ++static void ++load80211Structs ( int skfd, char *ifName, struct wireless_info *wi ) ++{ ++ int rc, ifIndex = 0; ++ struct ifreq ifr; ++ char MACAddress [ MACADDR_LEN + 1 ]; ++ ++ strcpy ( ifr.ifr_name, ifName ); ++ rc = ioctl ( skfd, SIOCGIFHWADDR, &ifr ); ++ if ( rc >= 0 ) { ++ ++ sprintf ( MACAddress, "%02X:%02X:%02X:%02X:%02X:%02X\0", ++ ( UCHAR ) ifr.ifr_hwaddr.sa_data[0], ( UCHAR ) ifr.ifr_hwaddr.sa_data[1], ++ ( UCHAR ) ifr.ifr_hwaddr.sa_data[2], ( UCHAR ) ifr.ifr_hwaddr.sa_data[3], ++ ( UCHAR ) ifr.ifr_hwaddr.sa_data[4], ( UCHAR ) ifr.ifr_hwaddr.sa_data[5] ); ++ ++ nSc.haveStationID = TRUE; ++ strcpy ( nSc.stationID, MACAddress ); ++ nOp.haveMACAddress = TRUE; ++ strcpy ( nOp.MACAddress, MACAddress ); ++ nRi.haveManufacturerOUI = TRUE; ++ strncpy ( nRi.manufacturerOUI, MACAddress, MAN_OUI_LEN ); ++ ++ ifIndex = if_nametoindex ( ifName ); ++ if ( !ifIndex ) { ++ syslog ( LOG_ERR, "SNMP %s - %s %s\n", ++ "ieee802dot11.load80211Structs()", ifName, "has no ifIndex" ); ++ return; ++ } ++ ++ loadWiExtTo80211Structs ( ifIndex, ifName, wi ); ++ ++ if ( hasChanged (( char * ) &nSc, sizeof ( nSc ))) { ++ nSc.ifIndex = ifIndex; ++ sprintf ( nSc.UID, "%04d\0", nSc.ifIndex ); ++ strcpy ( nSc.ifName, ifName ); ++ addList (( char * ) &scList, ( char * ) &nSc, sizeof ( nSc )); ++ } ++ ++ if ( hasChanged (( char * ) &nPr, sizeof ( nPr ))) { ++ nPr.ifIndex = ifIndex; ++ sprintf ( nPr.UID, "%04d\0", nPr.ifIndex ); ++ strcpy ( nPr.ifName, ifName ); ++ addList (( char * ) &prList, ( char * ) &nPr, sizeof ( nPr )); ++ } ++ ++ if ( hasChanged (( char * ) &nOp, sizeof ( nOp ))) { ++ nOp.ifIndex = ifIndex; ++ sprintf ( nOp.UID, "%04d\0", nOp.ifIndex ); ++ strcpy ( nOp.ifName, ifName ); ++ addList (( char * ) &opList, ( char * ) &nOp, sizeof ( nOp )); ++ } ++ ++ if ( hasChanged (( char * ) &nCo, sizeof ( nCo ))) { ++ nCo.ifIndex = ifIndex; ++ sprintf ( nCo.UID, "%04d\0", nCo.ifIndex ); ++ strcpy ( nCo.ifName, ifName ); ++ addList (( char * ) &coList, ( char * ) &nCo, sizeof ( nCo )); ++ } ++ ++ if ( hasChanged (( char * ) &nRi, sizeof ( nRi ))) { ++ nRi.ifIndex = ifIndex; ++ sprintf ( nRi.UID, "%04d\0", nRi.ifIndex ); ++ strcpy ( nRi.ifName, ifName ); ++ addList (( char * ) &riList, ( char * ) &nRi, sizeof ( nRi )); ++ } ++ ++ if ( hasChanged (( char * ) &nPo, sizeof ( nPo ))) { ++ nPo.ifIndex = ifIndex; ++ sprintf ( nPo.UID, "%04d\0", nPo.ifIndex ); ++ strcpy ( nPo.ifName, ifName ); ++ addList (( char * ) &poList, ( char * ) &nPo, sizeof ( nPo )); ++ } ++ ++ if ( hasChanged (( char * ) &nPa, sizeof ( nPa ))) { ++ nPa.ifIndex = ifIndex; ++ sprintf ( nPa.UID, "%04d\0", nPa.ifIndex ); ++ strcpy ( nPa.ifName, ifName ); ++ addList (( char * ) &paList, ( char * ) &nPa, sizeof ( nPa )); ++ } ++ ++ if ( hasChanged (( char * ) &nPt, sizeof ( nPt ))) { ++ nPt.ifIndex = ifIndex; ++ sprintf ( nPt.UID, "%04d\0", nPt.ifIndex ); ++ strcpy ( nPt.ifName, ifName ); ++ addList (( char * ) &ptList, ( char * ) &nPt, sizeof ( nPt )); ++ } ++ ++ if ( hasChanged (( char * ) &nPf, sizeof ( nPf ))) { ++ nPf.ifIndex = ifIndex; ++ sprintf ( nPf.UID, "%04d\0", nPf.ifIndex ); ++ strcpy ( nPf.ifName, ifName ); ++ addList (( char * ) &pfList, ( char * ) &nPf, sizeof ( nPf )); ++ } ++ ++ if ( hasChanged (( char * ) &nPd, sizeof ( nPd ))) { ++ nPd.ifIndex = ifIndex; ++ sprintf ( nPd.UID, "%04d\0", nPd.ifIndex ); ++ strcpy ( nPd.ifName, ifName ); ++ addList (( char * ) &pdList, ( char * ) &nPd, sizeof ( nPd )); ++ } ++ ++ if ( hasChanged (( char * ) &nPi, sizeof ( nPi ))) { ++ nPi.ifIndex = ifIndex; ++ sprintf ( nPi.UID, "%04d\0", nPi.ifIndex ); ++ strcpy ( nPi.ifName, ifName ); ++ addList (( char * ) &piList, ( char * ) &nPi, sizeof ( nPi )); ++ } ++ } ++ ++//printf ( "%s - ifIndex: %d ifName: %s UID: %s\n", ++// "load80211Structs() - HASCHANGED", ifIndex, ifName, nSc.UID ); ++} ++ ++/**************************************************************************** ++* * ++* initStructs() - initialize structures * ++* * ++****************************************************************************/ ++static void initStructs() ++{ ++ int i; ++ ++ // 802.11 MIB Stuctures ++ memset (( char * ) &nSc, 0, sizeof ( nSc )); memset (( char * ) &nAa, 0, sizeof ( nAa )); ++ memset (( char * ) &nDf, 0, sizeof ( nDf )); memset (( char * ) &nKm, 0, sizeof ( nKm )); ++ memset (( char * ) &nPr, 0, sizeof ( nPr )); memset (( char * ) &nOp, 0, sizeof ( nOp )); ++ memset (( char * ) &nCo, 0, sizeof ( nCo )); memset (( char * ) &nGa, 0, sizeof ( nGa )); ++ memset (( char * ) &nRi, 0, sizeof ( nRi )); memset (( char * ) &nPo, 0, sizeof ( nPo )); ++ memset (( char * ) &nPa, 0, sizeof ( nPa )); memset (( char * ) &nPt, 0, sizeof ( nPt )); ++ memset (( char * ) &nPf, 0, sizeof ( nPf )); memset (( char * ) &nPd, 0, sizeof ( nPd )); ++ memset (( char * ) &nPi, 0, sizeof ( nPi )); memset (( char * ) &nRd, 0, sizeof ( nRd )); ++ memset (( char * ) &nAl, 0, sizeof ( nAl )); memset (( char * ) &nRt, 0, sizeof ( nRt )); ++ memset (( char * ) &nRr, 0, sizeof ( nRr )); ++ ++ // Wireless Extensions ++ wepCurrentKey = 0; ++ haveWepCurrentKey = FALSE; ++ for ( i = 0; i < MAX_WEP_KEYS; i++ ) { ++ wep[i].len = 0; ++ wep[i].key[0] = '\0'; ++ wep[i].haveKey = FALSE; ++ } ++} ++ ++/**************************************************************************** ++* * ++* Wireless Extensions Specific Functions * ++* * ++****************************************************************************/ ++/**************************************************************************** ++* * ++* loadWiExtTo80211Structs() - load wireless extensions to 802.11 structures * ++* * ++****************************************************************************/ ++static void ++loadWiExtTo80211Structs ( int ifIndex, char *ifName, struct wireless_info *wi ) ++{ ++ int i, j = 0; ++ ++ // dot11Smt Group ++ // dot11StationConfigTable ++ nSc.havePrivacyOptionImplemented = TRUE; ++ nSc.privacyOptionImplemented = 1; // assume we support WEP ++ ++ if ( wi->has_power ) { ++ nSc.havePowerManagementMode = TRUE; ++ nSc.powerManagementMode = 1; // assume power is active ++ if ( !wi->power.disabled && ++ wi->power.flags & IW_POWER_MIN ) ++ nSc.powerManagementMode = 2; // power save mode ++ } ++ ++ if ( wi->has_essid && strlen ( wi->essid )) { ++ nSc.haveDesiredSSID = TRUE; ++ strcpy ( nSc.desiredSSID, wi->essid ); ++ } ++ ++ if ( wi->has_mode ) { ++ nSc.haveDesiredBSSType = TRUE; ++ if ( wi->mode == IW_MODE_ADHOC ) ++ nSc.desiredBSSType = 2; // independent ++ else if ( wi->has_ap_addr ) ++ nSc.desiredBSSType = 1; // infrastructure ++ else ++ nSc.desiredBSSType = 3; // any ++ } ++ ++ if ( wi->has_range ) { ++ for ( i = 0; i < wi->range.num_bitrates && j < 126; i++ ) { ++ nSc.haveOperationalRateSet = TRUE; ++ nSc.operationalRateSet[j++] = ( char ) ( wi->range.bitrate[i] / 500000L ); ++ } ++ } ++ ++ // dot11AuthenticationAlgorithmsTable ++ nAa.haveAuthenticationAlgorithm = TRUE; // it's a rule to always have ++ nAa.haveAuthenticationAlgorithmsEnable = TRUE; // 'open' supported ++ nAa.ifIndex = ifIndex; ++ nAa.authenticationAlgorithmsIndex = 1; // index number one ++ nAa.authenticationAlgorithm = 1; // 1 => open key ++ sprintf ( nAa.UID, "%04d%04d\0", nAa.ifIndex, nAa.authenticationAlgorithmsIndex ); ++ nAa.authenticationAlgorithmsEnable = 1; // enabled by default ++ if ( ( wi->has_key ) && ++ ( wi->key_size != 0 ) && ++ !( wi->key_flags & IW_ENCODE_DISABLED )) ++ nAa.authenticationAlgorithmsEnable = 2; ++ addList (( char * ) &aaList, ( char * ) &nAa, sizeof ( nAa )); ++ ++ nAa.haveAuthenticationAlgorithm = TRUE; // I'm gonna assume we always support WEP ++ nAa.haveAuthenticationAlgorithmsEnable = TRUE; ++ nAa.ifIndex = ifIndex; ++ nAa.authenticationAlgorithmsIndex = 2; // index number 2 ++ nAa.authenticationAlgorithm = 2; // 2 => shared key ++ sprintf ( nAa.UID, "%04d%04d\0", nAa.ifIndex, nAa.authenticationAlgorithmsIndex ); ++ nAa.authenticationAlgorithmsEnable = 2; ++ if ( ( wi->has_key ) && ++ ( wi->key_size != 0 ) && ++ !( wi->key_flags & IW_ENCODE_DISABLED )) ++ nAa.authenticationAlgorithmsEnable = 1; // disabled by default ++ addList (( char * ) &aaList, ( char * ) &nAa, sizeof ( nAa )); ++ ++ //dot11WEPDefaultKeysTable ++ if ( wi->has_range ) { ++ for ( i = 0; i < MAX_WEP_KEYS; i++ ) { ++ nDf.haveWEPDefaultKeyValue = TRUE; ++ nDf.ifIndex = ifIndex; ++ nDf.WEPDefaultKeyIndex = i + 1; // index number ++ sprintf ( nDf.UID, "%04d%04d\0", nDf.ifIndex, nDf.WEPDefaultKeyIndex ); ++ if ( wep[i].haveKey ) ++ strcpy ( nDf.WEPDefaultKeyValue, "*****" ); ++ else ++ nDf.WEPDefaultKeyValue[0] = '\0'; ++ addList (( char * ) &dfList, ( char * ) &nDf, sizeof ( nDf )); ++ } ++ } ++ ++ // dot11PrivacyTable ++ nPr.havePrivacyInvoked = TRUE; ++ nPr.privacyInvoked = 2; // 2 => FALSE ++ nPr.haveWEPDefaultKeyID = TRUE; ++ nPr.WEPDefaultKeyID = 0; ++ nPr.haveExcludeUnencrypted = TRUE; ++ nPr.excludeUnencrypted = 2; // 2 => FALSE ++ if ( wi->has_range ) { ++ if ( ( wi->key_size != 0 ) && ++ !( wi->key_flags & IW_ENCODE_DISABLED )) { ++ nPr.privacyInvoked = 1; ++ if ( wi->key_flags & IW_ENCODE_RESTRICTED ) ++ nPr.excludeUnencrypted = 1; ++ nPr.WEPDefaultKeyID = wepCurrentKey; ++ } ++ } ++ ++ // dot11Mac Group ++ // dot11OperationTable ++ if ( wi->has_range ) { ++ nOp.haveRTSThreshold = TRUE; ++ nOp.RTSThreshold = wi->range.max_rts; ++ } ++ ++ if ( wi->has_frag && wi->frag.value ) { ++ nOp.haveFragmentationThreshold = TRUE; ++ nOp.fragmentationThreshold = wi->frag.value; ++ } ++ ++ // dot11Phy Group ++ // dot11PhyOperationTable ++ if ( strstr ( wi->name, "IEEE 802.11-FS" )) nPo.PHYType = 1; // So what if I ++ if ( strstr ( wi->name, "IEEE 802.11-DS" )) nPo.PHYType = 2; // made up a couple? ++ if ( strstr ( wi->name, "IEEE 802.11-IR" )) nPo.PHYType = 3; ++ if ( strstr ( wi->name, "IEEE 802.11-OFDM" )) nPo.PHYType = 4; // 802.11a ++ if ( strstr ( wi->name, "IEEE 802.11-OFDM/DS" )) nPo.PHYType = 5; // 802.11g ++ if ( strstr ( wi->name, "IEEE 802.11-TURBO" )) nPo.PHYType = 6; // Atheros TURBO mode ++ if ( nPo.PHYType ) nPo.havePHYType = TRUE; ++ ++ // dot11PhyDSSSTable ++ if ( wi->has_range ) { // && wi->freq <= ( double ) 2483000000 ) { // DSSS frequencies only ++ for ( i = 0; i < wi->range.num_frequency; i++ ) { ++ if ((( double ) ( wi->range.freq[i].e * 10 ) * ( double ) wi->range.freq[i].m ) == wi->freq ) { ++ nPd.haveCurrentChannel = TRUE; ++ nPd.currentChannel = wi->range.freq[i].i; ++ } ++ } ++ } ++ ++ // dot11SupportedDataRatesTxTable ++ if ( wi->has_range ) { ++ for ( i = 0; i < wi->range.num_bitrates; i++ ) { ++ nRt.ifIndex = ifIndex; ++ nRt.supportedDataRatesTxIndex = i + 1; ++ nRt.supportedDataRatesTxValue = wi->range.bitrate[i] / 500000L; ++ nRt.haveSupportedDataRatesTxValue = TRUE; ++ sprintf ( nRt.UID, "%04d%04d\0", nRt.ifIndex, nRt.supportedDataRatesTxIndex ); ++ strcpy ( nRt.ifName, ifName ); ++ addList (( char * ) &rtList, ( char * ) &nRt, sizeof ( nRt )); ++ } ++ } ++ ++ // dot11SupportedDataRatesRxTable ++ if ( wi->has_range ) { ++ for ( i = 0; i < wi->range.num_bitrates; i++ ) { ++ nRr.ifIndex = ifIndex; ++ nRr.supportedDataRatesRxIndex = i + 1; ++ nRr.supportedDataRatesRxValue = wi->range.bitrate[i] / 500000L; ++ nRr.haveSupportedDataRatesRxValue = TRUE; ++ sprintf ( nRr.UID, "%04d%04d\0", nRr.ifIndex, nRr.supportedDataRatesRxIndex ); ++ strcpy ( nRr.ifName, ifName ); ++ addList (( char * ) &rrList, ( char * ) &nRr, sizeof ( nRr )); ++ } ++ } ++ ++//printf ( "%s max_encoding_tokens: %d\n", ++// "loadWiExtTo80211Structs() - ", wi->range.max_encoding_tokens ); ++} ++ ++/**************************************************************************** ++* * ++* loadWiExt() - load wireless extensions structures; * ++* use ioctl calls and read /proc/net/wireless * ++* * ++****************************************************************************/ ++static void loadWiExt ( int skfd, char *ifname, struct wireless_info *wi ) ++{ ++ struct iwreq wrq; // ioctl request structure ++ FILE *fp; ++ char bfr[1024]; ++ char buffer[sizeof ( iwrange ) * 2]; /* Large enough */ ++ char *s, *t; ++ int i, j; ++ ++ strncpy ( wrq.ifr_name, ifname, IFNAMSIZ ); ++ ++ /* Get wireless name */ ++ if ( ioctl ( skfd, SIOCGIWNAME, &wrq ) >= 0 ) { ++ strncpy ( wi->name, wrq.u.name, IFNAMSIZ ); ++ wi->name[IFNAMSIZ] = '\0'; ++ } ++ ++ /* Get ranges */ // NOTE: some version checking in iwlib.c ++ memset ( buffer, 0, sizeof ( buffer )); ++ wrq.u.data.pointer = ( caddr_t ) &buffer; ++ wrq.u.data.length = sizeof ( buffer ); ++ wrq.u.data.flags = 0; ++ if ( ioctl ( skfd, SIOCGIWRANGE, &wrq ) >= 0 ) { ++ memcpy (( char * ) &wi->range, buffer, sizeof ( iwrange )); ++ wi->has_range = 1; ++ } ++ ++ /* Get network ID */ ++ if ( ioctl ( skfd, SIOCGIWNWID, &wrq ) >= 0 ) { ++ memcpy ( &wi->nwid, &wrq.u.nwid, sizeof ( iwparam )); ++ wi->has_nwid = 1; ++ } ++ ++ /* Get frequency / channel */ // THIS NUMBER LOOKS FUNNY ++ if ( ioctl ( skfd, SIOCGIWFREQ, &wrq ) >= 0 ) { ++ wi->has_freq = 1; ++ wi->freq = (( double ) wrq.u.freq.m ) * pow ( 10, wrq.u.freq.e ); ++ } ++ ++ /* Get sensitivity */ ++ if ( ioctl ( skfd, SIOCGIWSENS, &wrq ) >= 0 ) { ++ wi->has_sens = 1; ++ memcpy ( &wi->sens, &wrq.u.sens, sizeof ( iwparam )); ++ } ++ ++ /* Get encryption information */ ++ wrq.u.data.pointer = ( caddr_t ) &wi->key; ++ wrq.u.data.length = IW_ENCODING_TOKEN_MAX; ++ wrq.u.data.flags = 0; ++ if ( ioctl ( skfd, SIOCGIWENCODE, &wrq ) >= 0 ) { ++ wi->has_key = 1; ++ wi->key_size = wrq.u.data.length; ++ wi->key_flags = wrq.u.data.flags; ++ wepCurrentKey = wrq.u.data.flags & IW_ENCODE_INDEX; ++ } ++ ++ for ( i = 0; i < wi->range.max_encoding_tokens; i++ ) { ++ wrq.u.data.pointer = ( caddr_t ) &wi->key; ++ wrq.u.data.length = IW_ENCODING_TOKEN_MAX; ++ wrq.u.data.flags = i; ++ if ( ioctl ( skfd, SIOCGIWENCODE, &wrq ) >= 0 ) { ++ if ( ( wrq.u.data.length != 0 ) && ++ !( wrq.u.data.flags & IW_ENCODE_DISABLED )) { ++ wep[i].len = wrq.u.data.length; ++ wep[i].haveKey = TRUE; ++ t = wep[i].key; ++ for ( j = 0; j < wrq.u.data.length; j++ ) { ++ if (( j & 0x1 ) == 0 && j != 0 ) ++ strcpy ( t++, "-"); ++ sprintf ( t, "%.2X", wi->key[j] ); ++ t += 2; ++ } ++ t = '\0'; ++ } ++ } ++ } ++ ++ /* Get ESSID */ ++ wrq.u.essid.pointer = ( caddr_t ) &wi->essid; ++ wrq.u.essid.length = IW_ESSID_MAX_SIZE + 1; ++ wrq.u.essid.flags = 0; ++ if ( ioctl ( skfd, SIOCGIWESSID, &wrq ) >= 0 ) { ++ wi->has_essid = 1; ++ wi->essid_on = wrq.u.data.flags; ++ } ++ ++ /* Get AP address */ ++ if ( ioctl ( skfd, SIOCGIWAP, &wrq ) >= 0 ) { ++ wi->has_ap_addr = 1; ++ memcpy ( &wi->ap_addr, &wrq.u.ap_addr, sizeof ( sockaddr )); ++ } ++ ++ /* Get NickName */ ++ wrq.u.essid.pointer = ( caddr_t ) &wi->nickname; ++ wrq.u.essid.length = IW_ESSID_MAX_SIZE + 1; ++ wrq.u.essid.flags = 0; ++ if ( ioctl ( skfd, SIOCGIWNICKN, &wrq ) >= 0 ) { ++ if ( wrq.u.data.length > 1 ) ++ wi->has_nickname = 1; ++ } ++ ++ /* Get bit rate */ ++ if ( ioctl ( skfd, SIOCGIWRATE, &wrq ) >= 0 ) { ++ wi->has_bitrate = 1; ++ memcpy ( &wi->bitrate, &wrq.u.bitrate, sizeof ( iwparam )); ++ } ++ ++ /* Get RTS threshold */ ++ if ( ioctl ( skfd, SIOCGIWRTS, &wrq ) >= 0 ) { ++ wi->has_rts = 1; ++ memcpy ( &wi->rts, &wrq.u.rts, sizeof ( iwparam )); ++ } ++ ++ /* Get fragmentation threshold */ ++ if ( ioctl ( skfd, SIOCGIWFRAG, &wrq ) >= 0 ) { ++ wi->has_frag = 1; ++ memcpy ( &wi->frag, &wrq.u.frag, sizeof ( iwparam )); ++ } ++ ++ /* Get operation mode */ ++ if ( ioctl ( skfd, SIOCGIWMODE, &wrq ) >= 0 ) { ++ wi->mode = wrq.u.mode; ++ if ( wi->mode < IW_NUM_OPER_MODE && wi->mode >= 0 ) ++ wi->has_mode = 1; ++ } ++ ++ /* Get Power Management settings */ // #if WIRELESS_EXT > 9 ++ wrq.u.power.flags = 0; ++ if ( ioctl ( skfd, SIOCGIWPOWER, &wrq ) >= 0 ) { ++ wi->has_power = 1; ++ memcpy ( &wi->power, &wrq.u.power, sizeof ( iwparam )); ++ } ++ ++ /* Get retry limit/lifetime */ // #if WIRELESS_EXT > 10 ++ if ( ioctl ( skfd, SIOCGIWRETRY, &wrq ) >= 0 ) { ++ wi->has_retry = 1; ++ memcpy ( &wi->retry, &wrq.u.retry, sizeof ( iwparam )); ++ } ++ ++ /* Get stats */ // #if WIRELESS_EXT > 11 ++ wrq.u.data.pointer = ( caddr_t ) &wi->stats; ++ wrq.u.data.length = 0; ++ wrq.u.data.flags = 1; /* Clear updated flag */ ++ if ( ioctl ( skfd, SIOCGIWSTATS, &wrq ) < 0 ) ++ wi->has_stats = 1; ++ ++ if ( !wi->has_stats ) { // no ioctl support, go to file ++ fp = fopen ( PROC_NET_WIRELESS, "r" ); ++ if ( fp ) { ++ while ( fgets ( bfr, sizeof ( bfr ), fp )) { ++ bfr [ sizeof ( bfr ) - 1 ] = '\0'; // no buffer overruns here! ++ strtok (( char * ) &bfr, "\n" ); // '\n' => '\0' ++ if ( strstr ( bfr, ifname ) && strstr ( bfr, ":" )) { ++ wi->has_stats = 1; ++ s = bfr; ++ s = strchr ( s, ':' ); s++; /* Skip ethX: */ ++ s = strtok ( s, " " ); /* ' ' => '\0' */ ++ sscanf ( s, "%X", &wi->stats.status ); // status ++ ++ s = strtok ( NULL, " " ); // link quality ++ if ( strchr ( s, '.' ) != NULL ) ++ wi->stats.qual.updated |= 1; ++ sscanf ( s, "%d", &wi->stats.qual.qual ); ++ ++ s = strtok ( NULL, " " ); // signal level ++ if ( strchr ( s,'.' ) != NULL ) ++ wi->stats.qual.updated |= 2; ++ sscanf ( s, "%d", &wi->stats.qual.level ); ++ ++ s = strtok ( NULL, " " ); // noise level ++ if ( strchr ( s, '.' ) != NULL ) ++ wi->stats.qual.updated += 4; ++ sscanf ( s, "%d", &wi->stats.qual.noise ); ++ ++ s = strtok ( NULL, " " ); sscanf ( s, "%d", &wi->stats.discard.nwid ); ++ s = strtok ( NULL, " " ); sscanf ( s, "%d", &wi->stats.discard.code ); ++ s = strtok ( NULL, " " ); sscanf ( s, "%d", &wi->stats.discard.fragment ); ++ s = strtok ( NULL, " " ); sscanf ( s, "%d", &wi->stats.discard.retries ); ++ s = strtok ( NULL, " " ); sscanf ( s, "%d", &wi->stats.discard.misc ); ++ s = strtok ( NULL, " " ); sscanf ( s, "%d", &wi->stats.miss.beacon ); ++ } ++ } ++ fclose ( fp ); ++ } ++ } ++ ++// printf ( "%s bfr: %s\n", "loadTables()", bfr ); ++} ++ ++/**************************************************************************** ++* * ++* displayWiExt() - show what I got from Wireless Extensions * ++* * ++****************************************************************************/ ++static void displayWiExt ( struct wireless_info info ) ++{ ++#ifdef DISPLAYWIEXT ++ int i; ++ char title[] = "displayWiExt() -"; ++ ++ printf ( "========================================\n" ); ++ printf ( "===> Wireless Extension IOCTL calls <===\n" ); ++ printf ( "========================================\n" ); ++ ++ if ( strlen ( info.name )) ++ printf ( "%s name: %s\n", "SIOCGIWNAME", info.name ); ++ else ++ printf ( "%s\n", "no info.name support" ); ++ ++ if ( info.has_nickname = 1 ) ++ printf ( "%s nickname: %s\n", "SIOCGIWNICKN", info.nickname ); ++ else ++ printf ( "%s %s\n", "SIOCGIWNICKN", " ===> no info.nickname support" ); ++ ++ if ( info.has_essid ) ++ printf ( "%s essid_on: %d essid: %s\n", "SIOCGIWESSID", info.essid_on, info.essid ); ++ else ++ printf ( "%s %s\n", "SIOCGIWESSID", " ===> no info.essid support" ); ++ ++ if ( info.has_range ) { ++ printf ( "%s throughput: %d\n", "SIOCGIWRANGE", info.range.throughput ); ++ printf ( "%s min_nwid: %d\n", "SIOCGIWRANGE", info.range.min_nwid ); ++ printf ( "%s max_nwid: %d\n", "SIOCGIWRANGE", info.range.max_nwid ); ++ printf ( "%s sensitivity: %d\n", "SIOCGIWRANGE", info.range.sensitivity ); ++ printf ( "%s num_bitrates: %d\n", "SIOCGIWRANGE", info.range.num_bitrates ); ++ for ( i = 0; i < info.range.num_bitrates; i++ ) ++ printf ( "%s bitrate[%d]: %d\n", "SIOCGIWRANGE", i, info.range.bitrate[i] ); ++ printf ( "%s min_rts: %d\n", "SIOCGIWRANGE", info.range.min_rts ); ++ printf ( "%s max_rts: %d\n", "SIOCGIWRANGE", info.range.max_rts ); ++ printf ( "%s min_frag: %d\n", "SIOCGIWRANGE", info.range.min_frag ); ++ printf ( "%s max_frag: %d\n", "SIOCGIWRANGE", info.range.max_frag ); ++ printf ( "%s min_pmp: %d\n", "SIOCGIWRANGE", info.range.min_pmp ); ++ printf ( "%s max_pmp: %d\n", "SIOCGIWRANGE", info.range.max_pmp ); ++ printf ( "%s min_pmt: %d\n", "SIOCGIWRANGE", info.range.min_pmt ); ++ printf ( "%s max_pmt: %d\n", "SIOCGIWRANGE", info.range.max_pmt ); ++ printf ( "%s pmp_flags: %d\n", "SIOCGIWRANGE", info.range.pmp_flags ); ++ printf ( "%s pmt_flags: %d\n", "SIOCGIWRANGE", info.range.pmt_flags ); ++ printf ( "%s pm_capa: %d\n", "SIOCGIWRANGE", info.range.pm_capa ); ++ printf ( "%s num_encoding_sizes: %d\n", "SIOCGIWRANGE", info.range.num_encoding_sizes ); ++ for ( i = 0; i < info.range.num_encoding_sizes; i++ ) ++ printf ( "%s encoding_size[%d]: %d\n", "SIOCGIWRANGE", i, info.range.encoding_size[i] ); ++ printf ( "%s max_encoding_tokens: %d\n", "SIOCGIWRANGE", info.range.max_encoding_tokens ); ++// printf ( "%s encoding_login_index: %d\n", "SIOCGIWRANGE", info.range.encoding_login_index ); ++ printf ( "%s txpower_capa: %d\n", "SIOCGIWRANGE", info.range.txpower_capa ); ++ printf ( "%s num_txpower: %d dBm\n", "SIOCGIWRANGE", info.range.num_txpower ); ++ for ( i = 0; i < info.range.num_txpower; i++ ) ++ printf ( "%s txpower[%d]: %d\n", "SIOCGIWRANGE", i, info.range.txpower[i] ); ++ printf ( "%s we_version_compiled: %d\n", "SIOCGIWRANGE", info.range.we_version_compiled ); ++ printf ( "%s we_version_source: %d\n", "SIOCGIWRANGE", info.range.we_version_source ); ++ printf ( "%s retry_capa: %d\n", "SIOCGIWRANGE", info.range.retry_capa ); ++ printf ( "%s retry_flags: %d\n", "SIOCGIWRANGE", info.range.retry_flags ); ++ printf ( "%s r_time_flags: %d\n", "SIOCGIWRANGE", info.range.r_time_flags ); ++ printf ( "%s min_retry: %d\n", "SIOCGIWRANGE", info.range.min_retry ); ++ printf ( "%s max_retry: %d\n", "SIOCGIWRANGE", info.range.max_retry ); ++ printf ( "%s min_r_time: %d\n", "SIOCGIWRANGE", info.range.min_r_time ); ++ printf ( "%s max_r_time: %d\n", "SIOCGIWRANGE", info.range.max_r_time ); ++ printf ( "%s num_channels: %d\n", "SIOCGIWRANGE", info.range.num_channels ); ++ printf ( "%s num_frequency: %d\n", "SIOCGIWRANGE", info.range.num_frequency ); ++ for ( i = 0; i < info.range.num_frequency; i++ ) ++ printf ( "%s freq[%d].i: %d freq[%d].e: %d freq[%d].m: %d\n", "SIOCGIWRANGE", ++ i, info.range.freq[i].i, i, info.range.freq[i].e, i, info.range.freq[i].m ); ++ } ++ else ++ printf ( "%s %s\n", "SIOCGIWRANGE", " ===> no info.range support" ); ++ ++ if ( info.has_nwid ) ++ printf ( "%s nwid - disabled: %d value: %X\n", "SIOCGIWNWID", info.nwid.disabled, info.nwid.value ); ++ else ++ printf ( "%s %s\n", "SIOCGIWNWID", " ===> no info.nwid support" ); ++ ++ if ( info.has_freq ) { ++// printf ( "%s freq: %g\n", "SIOCGIWFREQ", info.freq / GIGA ); ++ printf ( "%s freq: %g\n", "SIOCGIWFREQ", info.freq ); ++ } ++ else ++ printf ( "%s %s\n", "SIOCGIWFREQ", " ===> no info.freq support" ); ++ ++ if ( info.has_sens ) ++ printf ( "%s sens: %d\n", "SIOCGIWSENS", info.sens ); ++ else ++ printf ( "%s %s\n", "SIOCGIWSENS", " ===> no info.sens support" ); ++ ++ if ( info.has_key ) { ++ printf ( "%s key_size: %d key_flags: %d wepCurrentKey: %d\n", ++ "SIOCGIWENCODE", info.key_size, info.key_flags, wepCurrentKey ); ++ printf ( "%s MODE: %d DISABLED: %d INDEX: %d OPEN: %d RESTRICTED: %d NOKEY: %d TEMP: %d\n", ++ "SIOCGIWENCODE", info.key_flags & IW_ENCODE_MODE, ++ info.key_flags & IW_ENCODE_DISABLED ? 1:0, info.key_flags & IW_ENCODE_INDEX, ++ info.key_flags & IW_ENCODE_OPEN ? 1:0, info.key_flags & IW_ENCODE_RESTRICTED ? 1:0, ++ info.key_flags & IW_ENCODE_NOKEY ? 1:0, info.key_flags & IW_ENCODE_TEMP ? 1:0 ); ++ } ++ else ++ printf ( "%s %s\n", "SIOCGIWENCODE", " ===> no info.key support" ); ++ ++ for ( i = 0; i < MAX_WEP_KEYS; i++ ) { ++ if ( wep[i].haveKey ) ++ printf ( "%s wep[%d].len: %d wep[%d].key: %s\n", ++ "SIOCGIWENCODE", i, wep[i].len, i, wep[i].key ); ++ } ++ ++ if ( info.has_ap_addr ) ++ printf ( "%s ap_addr.sa_data: %02X:%02X:%02X:%02X:%02X:%02X ap_addr.sa_family: %d\n", ++ "SIOCGIWAP", ( UCHAR ) info.ap_addr.sa_data[0], ( UCHAR ) info.ap_addr.sa_data[1], ++ ( UCHAR ) info.ap_addr.sa_data[2], ( UCHAR ) info.ap_addr.sa_data[3], ++ ( UCHAR ) info.ap_addr.sa_data[4], ( UCHAR ) info.ap_addr.sa_data[5], ++ info.ap_addr.sa_family ); ++ else ++ printf ( "%s %s\n", "SIOCGIWAP", " ===> no ap_addr information" ); ++ ++ if ( info.has_bitrate ) ++ printf ( "%s bitrate: %d value: %d fixed: %d disabled: %d flags: %d\n", ++ "SIOCGIWRATE", info.bitrate, info.bitrate.value, info.bitrate.fixed, ++ info.bitrate.disabled, info.bitrate.flags ); ++ else ++ printf ( "%s %s\n", "SIOCGIWRATE", " ===> no info.bitrate support" ); ++ ++ if ( info.has_rts ) ++ printf ( "%s rts: %d\n", "SIOCGIWRTS", info.rts ); ++ else ++ printf ( "%s %s\n", "SIOCGIWRTS", " ===> no info.rts support" ); ++ ++ if ( info.has_frag ) ++ printf ( "%s frag: %d\n", "SIOCGIWFRAG", info.frag ); ++ else ++ printf ( "%s %s\n", "SIOCGIWFRAG", " ===> no info.frag support" ); ++ ++ if ( info.has_mode ) ++ printf ( "%s mode: %d\n", "SIOCGIWMODE", info.mode ); ++ else ++ printf ( "%s %s\n", "SIOCGIWMODE", " ===> no info.mode support" ); ++ ++ if ( info.has_power ) { ++ printf ( "%s power: %d\n", "SIOCGIWPOWER", info.power ); ++ printf ( "%s disabled: %d MIN: %d MAX: %d TIMEOUT: %d RELATIVE: %d\n", ++ "SIOCGIWPOWER", ++ info.power.disabled ? 1:0, ++ info.power.flags & IW_POWER_MIN ? 1:0, ++ info.power.flags & IW_POWER_MAX ? 1:0, ++ info.power.flags & IW_POWER_TIMEOUT ? 1:0, ++ info.power.flags & IW_POWER_RELATIVE ? 1:0 ); ++ printf ( "%s UNICAST: %d MULTICAST: %d ALL: %d FORCE: %d REPEATER: %d\n", ++ "SIOCGIWPOWER", ++ info.power.flags & IW_POWER_UNICAST_R ? 1:0, ++ info.power.flags & IW_POWER_MULTICAST_R ? 1:0, ++ info.power.flags & IW_POWER_ALL_R ? 1:0, ++ info.power.flags & IW_POWER_FORCE_S ? 1:0, ++ info.power.flags & IW_POWER_REPEATER ? 1:0 ); ++ } ++ else ++ printf ( "%s %s\n", "SIOCGIWPOWER", " ===> no info.power support" ); ++ ++ if ( info.has_retry ) ++ printf ( "%s retry: %d\n", "SIOCGIWRETRY", info.retry ); ++ else ++ printf ( "%s %s\n", "SIOCGIWRETRY", " ===> no info.retry support" ); ++ ++ if ( info.has_stats ) { ++ printf ( "%s status: %d\n", "SIOCGIWSTATS", info.stats.status ); ++ printf ( "%s qual.level: %d\n", "SIOCGIWSTATS", info.stats.qual.level ); ++ printf ( "%s qual.noise: %d\n", "SIOCGIWSTATS", info.stats.qual.noise ); ++ printf ( "%s qual.qual: %d\n", "SIOCGIWSTATS", info.stats.qual.qual ); ++ printf ( "%s qual.updated: %d\n", "SIOCGIWSTATS", info.stats.qual.updated ); ++ printf ( "%s discard.code: %d\n", "SIOCGIWSTATS", info.stats.discard.code ); ++ printf ( "%s discard.fragment: %d\n", "SIOCGIWSTATS", info.stats.discard.fragment ); ++ printf ( "%s discard.misc: %d\n", "SIOCGIWSTATS", info.stats.discard.misc ); ++ printf ( "%s discard.nwid: %d\n", "SIOCGIWSTATS", info.stats.discard.nwid ); ++ printf ( "%s discard.retries: %d\n", "SIOCGIWSTATS", info.stats.discard.retries ); ++ printf ( "%s miss.beacon: %d\n", "SIOCGIWSTATS", info.stats.miss.beacon ); ++ } ++ else ++ printf ( "%s %s\n", "SIOCGIWSTATS", " ===> no info.stats support" ); ++ ++ if ( info.txpower.flags & IW_TXPOW_MWATT ) ++ printf ( "%s txpower1: %d dBm disabled: %d fixed: %d flags: %d\n", "SIOCGIWRANGE", ++ mWatt2dbm ( info.txpower.value ), info.txpower.disabled, info.txpower.fixed, info.txpower.flags); ++ else ++ printf ( "%s txpower2: %d dBm disabled: %d fixed: %d flags: %d\n", "SIOCGIWRANGE", info.txpower.value, info.txpower.disabled, info.txpower.fixed, info.txpower.flags ); ++ ++ if ( info.has_range ) ++ if ( info.sens.value < 0 ) ++ printf ( "%s sens: %d dBm\n", "SIOCGIWRANGE", info.sens.value ); ++ else ++ printf ( "%s sens: %d/%d\n", "SIOCGIWRANGE", info.sens.value, info.range.sensitivity ); ++ ++ if ( info.has_range && ( info.stats.qual.level != 0 )) ++ if ( info.stats.qual.level > info.range.max_qual.level ) ++ /* Statistics are in dBm (absolute power measurement) */ ++ printf ( "%s Quality: %d/%d Signal level: %d dBm Noise level: %d dBm\n", ++ "SIOCGIWRANGE", ++ info.stats.qual.qual, info.range.max_qual.qual, ++ info.stats.qual.level - 0x100, ++ info.stats.qual.noise - 0x100 ); ++ else ++ printf ( "%s Quality: %d/%d Signal level: %d/%d Noise level: %d/%d", ++ "SIOCGIWRANGE", ++ info.stats.qual.qual, info.range.max_qual.qual, ++ info.stats.qual.level, info.range.max_qual.level, ++ info.stats.qual.noise, info.range.max_qual.noise ); ++ ++#endif // #ifdef DISPLAYWIEXT ++} ++ ++/**************************************************************************** ++* * ++* Linked List Functions * ++* * ++****************************************************************************/ ++/**************************************************************************** ++* * ++* addList() - add an entry to a linked list * ++* * ++****************************************************************************/ ++static void ++addList ( char *l, char *data, int len ) ++{ ++ char uid[256]; ++ LIST_HEAD ( , avNode ) *list; ++ ++ // NOTE: this assumes the UID is at the begining of the ++ // data structure and that UIDs are strings ++ ++ list = ( LIST_HEAD ( , avNode ) * ) l; // NOTE: don't know how to get ++ strcpy ( uid, data ); // rid of compiler warning on ++ // LISTHEAD typecast ++ // create a new node and the data that goes in it ++ newNode = malloc ( sizeof ( struct avNode )); ++ newNode->data = malloc ( len ); ++ memcpy ( newNode->data, data, len ); ++ ++ // this deals with an empty list ++ if ( LIST_EMPTY ( list )) { ++ LIST_INSERT_HEAD ( list, newNode, nodes ); ++ return; ++ } ++ ++ // this deals with UIDs that match ++ for ( np = LIST_FIRST ( list ); np != NULL; np = LIST_NEXT ( np, nodes )) { ++ if ( strncmp ( uid, np->data, strlen ( uid )) == 0 ) { // found matching UID ++ LIST_INSERT_AFTER ( np, newNode, nodes ); ++ if ( np->data ) ++ free ( np->data ); ++ LIST_REMOVE ( np, nodes ); ++ free ( np ); ++ return; ++ } ++ } ++ ++ // this deals with inserting a new UID in the list ++ for ( np = LIST_FIRST ( list ); np != NULL; np = LIST_NEXT ( np, nodes )) { ++ lastNode = np; ++ if ( strncmp ( np->data, uid, strlen ( uid )) > 0 ) { // old ID > new ID AND ++ LIST_INSERT_BEFORE ( np, newNode, nodes ); ++ return; ++ } ++ } ++ ++ // this deals with a UID that needs to go on the end of the list ++ LIST_INSERT_AFTER ( lastNode, newNode, nodes ); ++ ++ return; ++} ++ ++/**************************************************************************** ++* * ++* initLists() - initialize all the linked lists * ++* * ++****************************************************************************/ ++static void initLists() ++{ ++ LIST_INIT ( &scList ); LIST_INIT ( &aaList ); LIST_INIT ( &dfList ); ++ LIST_INIT ( &kmList ); LIST_INIT ( &prList ); ++ LIST_INIT ( &opList ); LIST_INIT ( &coList ); ++ LIST_INIT ( &gaList ); LIST_INIT ( &riList ); LIST_INIT ( &poList ); ++ LIST_INIT ( &paList ); LIST_INIT ( &ptList ); LIST_INIT ( &pfList ); ++ LIST_INIT ( &pdList ); LIST_INIT ( &piList ); LIST_INIT ( &rdList ); ++ LIST_INIT ( &alList ); LIST_INIT ( &rtList ); LIST_INIT ( &rrList ); ++} ++/**************************************************************************** ++* * ++* flushLists() - flush all linked lists * ++* * ++****************************************************************************/ ++static void flushLists() ++{ ++ flushList (( char * ) &scList ); flushList (( char * ) &aaList ); ++ flushList (( char * ) &dfList ); flushList (( char * ) &kmList ); ++ flushList (( char * ) &prList ); ++ flushList (( char * ) &opList ); flushList (( char * ) &coList ); ++ flushList (( char * ) &gaList ); flushList (( char * ) &riList ); ++ flushList (( char * ) &poList ); flushList (( char * ) &paList ); ++ flushList (( char * ) &ptList ); flushList (( char * ) &pfList ); ++ flushList (( char * ) &pdList ); flushList (( char * ) &piList ); ++ flushList (( char * ) &rdList ); flushList (( char * ) &alList ); ++ flushList (( char * ) &rtList ); flushList (( char * ) &rrList ); ++} ++ ++/**************************************************************************** ++* * ++* flushList() - flush a linked list * ++* * ++****************************************************************************/ ++static void flushList ( char *l ) ++{ ++ LIST_HEAD ( , avNode ) *list; ++ ++ list = ( LIST_HEAD ( , avNode ) * ) l; // NOTE: don't know how to get ++ while ( !LIST_EMPTY ( list )) { // rid of compiler warning on ++ np = LIST_FIRST ( list ); // LISTHEAD typecast ++ if ( np->data ) ++ free ( np->data ); ++ LIST_REMOVE ( np, nodes ); ++ free ( np ); ++ } ++} ++ ++/**************************************************************************** ++* * ++* Utility Functions * ++* * ++****************************************************************************/ ++/**************************************************************************** ++* * ++* The following two routines were taken directly from iwlib.c * ++* * ++****************************************************************************/ ++ /* ++ * Open a socket. ++ * Depending on the protocol present, open the right socket. The socket ++ * will allow us to talk to the driver. ++ */ ++static int openSocket ( void ) ++{ ++ static const int families[] = { ++ AF_INET, AF_IPX, AF_AX25, AF_APPLETALK ++ }; ++ unsigned int i; ++ int sock; ++ ++ /* ++ * Now pick any (exisiting) useful socket family for generic queries ++ * Note : don't open all the socket, only returns when one matches, ++ * all protocols might not be valid. ++ * Workaround by Jim Kaba ++ * Note : in 99% of the case, we will just open the inet_sock. ++ * The remaining 1% case are not fully correct... ++ */ ++ ++ /* Try all families we support */ ++ for(i = 0; i < sizeof(families)/sizeof(int); ++i) { ++ /* Try to open the socket, if success returns it */ ++ sock = socket(families[i], SOCK_DGRAM, 0); ++ if(sock >= 0) ++ return sock; ++ } ++ ++ return -1; ++} ++ ++/*------------------------------------------------------------------*/ ++/* ++ * Convert a value in milliWatt to a value in dBm. ++ */ ++static int mWatt2dbm ( int in ) ++{ ++#ifdef WE_NOLIBM ++ /* Version without libm : slower */ ++ double fin = (double) in; ++ int res = 0; ++ ++ /* Split integral and floating part to avoid accumulating rounding errors */ ++ while(fin > 10.0) ++ { ++ res += 10; ++ fin /= 10.0; ++ } ++ while(fin > 1.000001) /* Eliminate rounding errors, take ceil */ ++ { ++ res += 1; ++ fin /= LOG10_MAGIC; ++ } ++ return(res); ++#else /* WE_NOLIBM */ ++ /* Version with libm : faster */ ++ return((int) (ceil(10.0 * log10((double) in)))); ++#endif /* WE_NOLIBM */ ++} ++ ++/**************************************************************************** ++* * ++* htob - converts hex string to binary * ++* * ++****************************************************************************/ ++static char *htob ( char *s ) ++{ ++ char nibl, *byt; ++ static char bin[20]; ++ ++ byt = bin; ++ ++ while ((nibl = *s++) && nibl != ' ') { /* While not end of string. */ ++ nibl -= ( nibl > '9') ? ('A' - 10): '0'; ++ *byt = nibl << 4; /* place high nibble */ ++ if((nibl = *s++) && nibl != ' ') { ++ nibl -= ( nibl > '9') ? ('A' - 10): '0'; ++ *byt |= nibl; /* place low nibble */ ++ } ++ else break; ++ ++byt; ++ } ++ *++byt = '\0'; ++ return ( bin ); ++} ++ ++/**************************************************************************** ++* * ++* hasChanged() - see if area has been changed from NULLs * ++* * ++****************************************************************************/ ++static int hasChanged ( char *loc, int len ) ++{ ++ char *wrk; ++ int changed = TRUE; ++ ++ wrk = malloc ( len ); ++ memset ( wrk, 0, len ); ++ if ( memcmp ( loc, wrk, len ) == 0 ) ++ changed = FALSE; ++ free ( wrk ); ++ ++ return ( changed ); ++} ++ +--- net-snmp-5.1.2-orig/agent/mibgroup/ieee802dot11.h 1970-01-01 01:00:00.000000000 +0100 ++++ net-snmp-5.1.2-5/agent/mibgroup/ieee802dot11.h 2005-03-13 16:17:21.000000000 +0100 +@@ -0,0 +1,730 @@ ++/**************************************************************************** ++* * ++* File Name: ieee802dot11.h * ++* Used By: * ++* * ++* Operating System: * ++* Purpose: * ++* * ++* Comments: * ++* * ++* Author: Larry Simmons * ++* lsimmons@avantcom.com * ++* www.avantcom.com * ++* * ++* Creation Date: 09/02/03 * ++* * ++* Ver Date Inits Modification * ++* ----- -------- ----- ------------ * ++* 0.0.1 09/02/03 LRS created * ++* 0.0.2 09/24/03 LRS wouldn't build after fresh ./configure * ++****************************************************************************/ ++/* This file was generated by mib2c and is intended for use as a mib module ++ for the ucd-snmp snmpd agent. */ ++#ifndef _MIBGROUP_IEEE802DOT11_H ++#define _MIBGROUP_IEEE802DOT11_H ++/* we may use header_generic and header_simple_table from the util_funcs module */ ++ ++/**************************************************************************** ++* Includes * ++****************************************************************************/ ++#include ++ ++/**************************************************************************** ++* Linked List Defines * ++****************************************************************************/ ++// here are some Linked List MACROS I wanted to use, ++// but curiously were not in /usr/includes/sys/queue.h ++ ++#ifndef LIST_EMPTY ++ #define LIST_EMPTY(head) ((head)->lh_first == NULL) ++#endif ++ ++#ifndef LIST_NEXT ++ #define LIST_NEXT(elm, field) ((elm)->field.le_next) ++#endif ++ ++#ifndef LIST_INSERT_BEFORE ++ #define LIST_INSERT_BEFORE(listelm, elm, field) do { \ ++ (elm)->field.le_prev = (listelm)->field.le_prev; \ ++ LIST_NEXT((elm), field) = (listelm); \ ++ *(listelm)->field.le_prev = (elm); \ ++ (listelm)->field.le_prev = &LIST_NEXT((elm), field); \ ++ } while (0) ++#endif ++ ++#ifndef LIST_FIRST ++ #define LIST_FIRST(head) ((head)->lh_first) ++#endif ++ ++/**************************************************************************** ++* 802.11 MIB Defines * ++****************************************************************************/ ++#define SYS_STRING_LEN 256 ++#define MACADDR_LEN ( 6 * 2 ) + 5 ++#define OPER_RATE_SET_LEN 126 ++#define MAN_OUI_LEN ( 3 * 2 ) + 2 ++#define WEP_STR_LEN 64 ++#define SNMP_STR_LEN 128 ++#define TEXT_LEN 80 ++#define IFINDEX_LEN 4 ++#define IFNAME_LEN 16 ++#define MAX_WEP_KEYS 4 ++ ++#define AUTHENICATION_ALGORITHMS_INDEX_LEN 4 ++#define WEP_DEFAULT_KEY_INDEX_LEN 4 ++#define WEP_KEY_MAPPING_INDEX_LEN 4 ++#define GROUP_ADDRESS_INDEX_LEN 4 ++#define REG_DOMAIN_SUPPORT_INDEX_LEN 4 ++#define ANTENNA_LIST_INDEX_LEN 4 ++#define SUPPORTED_DATA_RATES_TX_INDEX_LEN 4 ++#define SUPPORTED_DATA_RATES_RX_INDEX_LEN 4 ++ ++#define SC_UID_LEN IFINDEX_LEN ++#define AA_UID_LEN IFINDEX_LEN + AUTHENICATION_ALGORITHMS_INDEX_LEN ++#define DF_UID_LEN IFINDEX_LEN + WEP_DEFAULT_KEY_INDEX_LEN ++#define KM_UID_LEN IFINDEX_LEN + WEP_KEY_MAPPING_INDEX_LEN ++#define PR_UID_LEN IFINDEX_LEN ++#define OP_UID_LEN IFINDEX_LEN ++#define CO_UID_LEN IFINDEX_LEN ++#define GA_UID_LEN IFINDEX_LEN + GROUP_ADDRESS_INDEX_LEN ++#define RI_UID_LEN IFINDEX_LEN ++#define PO_UID_LEN IFINDEX_LEN ++#define PA_UID_LEN IFINDEX_LEN ++#define PT_UID_LEN IFINDEX_LEN ++#define PF_UID_LEN IFINDEX_LEN ++#define PD_UID_LEN IFINDEX_LEN ++#define PI_UID_LEN IFINDEX_LEN ++#define RD_UID_LEN IFINDEX_LEN + REG_DOMAIN_SUPPORT_INDEX_LEN ++#define AL_UID_LEN IFINDEX_LEN + ANTENNA_LIST_INDEX_LEN ++#define RT_UID_LEN IFINDEX_LEN + SUPPORTED_DATA_RATES_TX_INDEX_LEN ++#define RR_UID_LEN IFINDEX_LEN + SUPPORTED_DATA_RATES_RX_INDEX_LEN ++ ++/**************************************************************************** ++* Linked List Structure * ++****************************************************************************/ ++static struct avNode { ++ LIST_ENTRY ( avNode ) nodes; ++ char *data; // pointer to data ++}; ++ ++typedef LIST_HEAD ( , avNode ) avList_t; ++ ++/**************************************************************************** ++* 802.11 MIB structures * ++****************************************************************************/ ++/**************************************************************************** ++* dot11Smt Group * ++****************************************************************************/ ++/**************************************************************************** ++* dot11StationConfigTable * ++****************************************************************************/ ++static struct scTbl_data { ++ ++ char UID [ SC_UID_LEN + 1 ]; // unique ID ++ char ifName [ IFNAME_LEN + 1 ]; // ifName of card ++ ++ long ifIndex; // ifindex of card ++ ++ char stationID [ MACADDR_LEN + 1 ]; // Default actual MacAddr ++ long mediumOccupancyLimit; ++ long CFPPollable; ++ long CFPPeriod; ++ long maxDuration; ++ long authenticationResponseTimeOut; ++ long privacyOptionImplemented; ++ long powerManagementMode; ++ char desiredSSID [ SNMP_STR_LEN + 1 ]; ++ long desiredBSSType; ++ char operationalRateSet [ OPER_RATE_SET_LEN + 1]; ++ long beaconPeriod; ++ long DTIMPeriod; ++ long associationResponseTimeOut; ++ long disAssociationReason; ++ char disAssociationStation [ MACADDR_LEN + 1 ]; ++ long deAuthenticationReason; ++ char deAuthenticationStation [ MACADDR_LEN + 1 ]; ++ long authenticateFailStatus; ++ char authenticateFailStation [ MACADDR_LEN + 1 ]; ++ ++ long haveStationID; ++ long haveMediumOccupancyLimit; ++ long haveCFPPollable; ++ long haveCFPPeriod; ++ long haveMaxDuration; ++ long haveAuthenticationResponseTimeOut; ++ long havePrivacyOptionImplemented; ++ long havePowerManagementMode; ++ long haveDesiredSSID; ++ long haveDesiredBSSType; ++ long haveOperationalRateSet; ++ long haveBeaconPeriod; ++ long haveDTIMPeriod; ++ long haveAssociationResponseTimeOut; ++ long haveDisAssociationReason; ++ long haveDisAssociationStation; ++ long haveDeAuthenticationReason; ++ long haveDeAuthenticationStation; ++ long haveAuthenticateFailStatus; ++ long haveAuthenticateFailStation; ++ ++} nSc, *sc = &nSc; ++ ++static avList_t scList; ++ ++/**************************************************************************** ++* dot11AuthenticationAlgorithmsTable * ++****************************************************************************/ ++static struct aaTbl_data { ++ ++ char UID [ AA_UID_LEN + 1 ]; ++ char ifName [ IFNAME_LEN + 1 ]; // ifName of card ++ ++ long ifIndex; // ifindex of card ++ long authenticationAlgorithmsIndex; ++ ++ long authenticationAlgorithm; ++ long authenticationAlgorithmsEnable; ++ ++ long haveAuthenticationAlgorithm; ++ long haveAuthenticationAlgorithmsEnable; ++ ++} nAa, *aa = &nAa; ++ ++static avList_t aaList; ++ ++/**************************************************************************** ++* dot11WEPDefaultKeysTable * ++****************************************************************************/ ++static struct dfTbl_data { ++ ++ char UID [ DF_UID_LEN + 1 ]; ++ char ifName [ IFNAME_LEN + 1 ]; ++ ++ long ifIndex; // ifindex of card ++ long WEPDefaultKeyIndex; ++ ++ char WEPDefaultKeyValue [ WEP_STR_LEN + 1 ]; ++ long haveWEPDefaultKeyValue; ++ ++} nDf, *df = &nDf; ++ ++static avList_t dfList; ++ ++/**************************************************************************** ++* dot11WEPKeyMappingsTable * ++****************************************************************************/ ++static struct kmTbl_data { ++ ++ char UID [ KM_UID_LEN + 1 ]; ++ char ifName [ IFNAME_LEN + 1 ]; ++ ++ long ifIndex; ++ long WEPKeyMappingIndex; ++ ++ char WEPKeyMappingAddress [ MACADDR_LEN + 1 ]; ++ long WEPKeyMappingWEPOn; ++ char WEPKeyMappingValue [ WEP_STR_LEN + 1 ]; ++ long WEPKeyMappingStatus; ++ ++ long haveWEPKeyMappingIndex; ++ long haveWEPKeyMappingAddress; ++ long haveWEPKeyMappingWEPOn; ++ long haveWEPKeyMappingValue; ++ long haveWEPKeyMappingStatus; ++ ++} nKm, *km = &nKm; ++ ++static avList_t kmList; ++ ++/**************************************************************************** ++* dot11PrivacyTable * ++****************************************************************************/ ++static struct prTbl_data { ++ ++ char UID [ PR_UID_LEN + 1 ]; ++ char ifName [ IFNAME_LEN + 1 ]; ++ ++ long ifIndex; ++ ++ long privacyInvoked; ++ long WEPDefaultKeyID; ++ long WEPKeyMappingLength; ++ long excludeUnencrypted; ++ unsigned long WEPICVErrorCount; ++ unsigned long WEPExcludedCount; ++ ++ long havePrivacyInvoked; ++ long haveWEPDefaultKeyID; ++ long haveWEPKeyMappingLength; ++ long haveExcludeUnencrypted; ++ long haveWEPICVErrorCount; ++ long haveWEPExcludedCount; ++ ++} nPr, *pr = &nPr; ++ ++static avList_t prList; ++ ++/**************************************************************************** ++* dot11Mac Group * ++****************************************************************************/ ++/**************************************************************************** ++* dot11OperationTable * ++****************************************************************************/ ++static struct opTbl_data { ++ ++ char UID [ OP_UID_LEN + 1 ]; // unique ID ++ char ifName [ IFNAME_LEN + 1 ]; // ifName of card ++ ++ long ifIndex; // ifindex of card ++ ++ char MACAddress [ MACADDR_LEN + 1 ]; ++ long RTSThreshold; ++ long shortRetryLimit; ++ long longRetryLimit; ++ long fragmentationThreshold; ++ long maxTransmitMSDULifetime; ++ long maxReceiveLifetime; ++ char manufacturerID [ SNMP_STR_LEN + 1 ]; ++ char productID [ SNMP_STR_LEN + 1 ]; ++ ++ long haveMACAddress; ++ long haveRTSThreshold; ++ long haveShortRetryLimit; ++ long haveLongRetryLimit; ++ long haveFragmentationThreshold; ++ long haveMaxTransmitMSDULifetime; ++ long haveMaxReceiveLifetime; ++ long haveManufacturerID; ++ long haveProductID; ++ ++} nOp, *op = &nOp; ++ ++static avList_t opList; ++ ++/**************************************************************************** ++* dot11CountersTable * ++****************************************************************************/ ++static struct coTbl_data { ++ ++ char UID [ CO_UID_LEN + 1 ]; // unique ID ++ char ifName [ IFNAME_LEN + 1 ]; // ifName of card ++ ++ long ifIndex; // ifindex of card ++ ++ unsigned long transmittedFragmentCount; ++ unsigned long multicastTransmittedFrameCount; ++ unsigned long failedCount; ++ unsigned long retryCount; ++ unsigned long multipleRetryCount; ++ unsigned long frameDuplicateCount; ++ unsigned long RTSSuccessCount; ++ unsigned long RTSFailureCount; ++ unsigned long ACKFailureCount; ++ unsigned long receivedFragmentCount; ++ unsigned long multicastReceivedFrameCount; ++ unsigned long FCSErrorCount; ++ unsigned long transmittedFrameCount; ++ unsigned long WEPUndecryptableCount; ++ ++ long haveTransmittedFragmentCount; ++ long haveMulticastTransmittedFrameCount; ++ long haveFailedCount; ++ long haveRetryCount; ++ long haveMultipleRetryCount; ++ long haveFrameDuplicateCount; ++ long haveRTSSuccessCount; ++ long haveRTSFailureCount; ++ long haveACKFailureCount; ++ long haveReceivedFragmentCount; ++ long haveMulticastReceivedFrameCount; ++ long haveFCSErrorCount; ++ long haveTransmittedFrameCount; ++ long haveWEPUndecryptableCount; ++ ++} nCo, *co = &nCo; ++ ++static avList_t coList; ++ ++/**************************************************************************** ++* dot11GroupAddressesTable * ++****************************************************************************/ ++static struct gaTbl_data { ++ ++ char UID [ GA_UID_LEN + 1 ]; ++ char ifName [ IFNAME_LEN + 1 ]; ++ ++ long ifIndex; // ifindex of card ++ long groupAddressesIndex; ++ ++ char address [ MACADDR_LEN + 1 ]; ++ long groupAddressesStatus; ++ ++ long haveAddress; ++ long haveGroupAddressesStatus; ++ ++} nGa, *ga = &nGa; ++ ++static avList_t gaList; ++ ++/**************************************************************************** ++* dot11Res Group * ++****************************************************************************/ ++static char resourceTypeIDName[] = "RTID"; ++static long haveResourceTypeIDName = 1; ++ ++/**************************************************************************** ++* dot11ResourceInfoTable * ++****************************************************************************/ ++static struct riTbl_data { ++ ++ char UID [ RI_UID_LEN + 1 ]; // unique ID ++ char ifName [ IFNAME_LEN + 1 ]; // ifName of card ++ ++ long ifIndex; // ifindex of card ++ ++ char manufacturerOUI [ MAN_OUI_LEN + 1 ]; ++ char manufacturerName [ SYS_STRING_LEN + 1 ]; ++ char manufacturerProductName [ SYS_STRING_LEN + 1 ]; ++ char manufacturerProductVersion [ SYS_STRING_LEN + 1 ]; ++ ++ char haveManufacturerOUI; ++ char haveManufacturerName; ++ char haveManufacturerProductName; ++ char haveManufacturerProductVersion; ++ ++} nRi, *ri = &nRi; ++ ++static avList_t riList; ++ ++/**************************************************************************** ++* dot11Phy Group * ++****************************************************************************/ ++/**************************************************************************** ++* dot11PhyOperationTable * ++****************************************************************************/ ++static struct poTbl_data { ++ ++ char UID [ PO_UID_LEN + 1 ]; // unique ID ++ char ifName [ IFNAME_LEN + 1 ]; // ifName of card ++ ++ long ifIndex; // ifindex of card ++ ++ long PHYType; ++ long currentRegDomain; ++ long tempType; ++ ++ long havePHYType; ++ long haveCurrentRegDomain; ++ long haveTempType; ++ ++} nPo, *po = &nPo; ++ ++static avList_t poList; ++ ++/**************************************************************************** ++* dot11PhyAntennaEntry * ++****************************************************************************/ ++static struct paTbl_data { ++ ++ char UID [ PA_UID_LEN + 1 ]; // unique ID ++ char ifName [ IFNAME_LEN + 1 ]; // ifName of card ++ ++ long ifIndex; // ifindex of card ++ ++ long currentTxAntenna; ++ long diversitySupport; ++ long currentRxAntenna; ++ ++ long haveCurrentTxAntenna; ++ long haveDiversitySupport; ++ long haveCurrentRxAntenna; ++ ++} nPa, *pa = &nPa; ++ ++static avList_t paList; ++ ++/**************************************************************************** ++* dot11PhyTxPowerTable * ++****************************************************************************/ ++static struct ptTbl_data { ++ ++ char UID [ PT_UID_LEN + 1 ]; // unique ID ++ char ifName [ IFNAME_LEN + 1 ]; // ifName of card ++ ++ long ifIndex; // ifindex of card ++ ++ long numberSupportedPowerLevels; ++ long TxPowerLevel1; ++ long TxPowerLevel2; ++ long TxPowerLevel3; ++ long TxPowerLevel4; ++ long TxPowerLevel5; ++ long TxPowerLevel6; ++ long TxPowerLevel7; ++ long TxPowerLevel8; ++ long currentTxPowerLevel; ++ ++ long haveNumberSupportedPowerLevels; ++ long haveTxPowerLevel1; ++ long haveTxPowerLevel2; ++ long haveTxPowerLevel3; ++ long haveTxPowerLevel4; ++ long haveTxPowerLevel5; ++ long haveTxPowerLevel6; ++ long haveTxPowerLevel7; ++ long haveTxPowerLevel8; ++ long haveCurrentTxPowerLevel ; ++ ++} nPt, *pt = &nPt; ++ ++static avList_t ptList; ++ ++/**************************************************************************** ++* dot11PhyFHSSTable * ++****************************************************************************/ ++static struct pfTbl_data { ++ ++ char UID [ PF_UID_LEN + 1 ]; // unique ID ++ char ifName [ IFNAME_LEN + 1 ]; // ifName of card ++ ++ long ifIndex; // ifindex of card ++ ++ long hopTime; ++ long currentChannelNumber; ++ long maxDwellTime; ++ long currentDwellTime; ++ long currentSet; ++ long currentPattern; ++ long currentIndex; ++ ++ long haveHopTime; ++ long haveCurrentChannelNumber; ++ long haveMaxDwellTime; ++ long haveCurrentDwellTime; ++ long haveCurrentSet; ++ long haveCurrentPattern; ++ long haveCurrentIndex; ++ ++} nPf, *pf = &nPf; ++ ++static avList_t pfList; ++ ++/**************************************************************************** ++* dot11PhyDSSSTable * ++****************************************************************************/ ++static struct pdTbl_data { ++ ++ char UID [ PD_UID_LEN + 1 ]; // unique ID ++ char ifName [ IFNAME_LEN + 1 ]; // ifName of card ++ ++ long ifIndex; // ifindex of card ++ ++ long currentChannel; ++ long CCAModeSupported; ++ long currentCCAMode; ++ long EDThreshold; ++ ++ long haveCurrentChannel; ++ long haveCCAModeSupported ; ++ long haveCurrentCCAMode; ++ long haveEDThreshold; ++ ++} nPd, *pd = &nPd; ++ ++static avList_t pdList; ++ ++/**************************************************************************** ++* dot11PhyIRTable * ++****************************************************************************/ ++static struct piTbl_data { ++ ++ char UID [ PI_UID_LEN + 1 ]; // unique ID ++ char ifName [ IFNAME_LEN + 1 ]; // ifName of card ++ ++ long ifIndex; // ifindex of card ++ ++ long CCAWatchdogTimerMax; ++ long CCAWatchdogCountMax; ++ long CCAWatchdogTimerMin; ++ long CCAWatchdogCountMin; ++ ++ long haveCCAWatchdogTimerMax; ++ long haveCCAWatchdogCountMax; ++ long haveCCAWatchdogTimerMin; ++ long haveCCAWatchdogCountMin; ++ ++} nPi, *pi = &nPi; ++ ++static avList_t piList; ++ ++/**************************************************************************** ++* dot11RegDomainsSupportedTable * ++****************************************************************************/ ++static struct rdTbl_data { ++ ++ char UID [ RD_UID_LEN + 1 ]; ++ char ifName [ IFNAME_LEN + 1 ]; ++ ++ long ifIndex; // ifindex of card ++ long regDomainsSupportIndex; ++ ++ long regDomainsSupportValue; ++ long haveRegDomainsSupportValue; ++ ++} nRd, *rd = &nRd; ++ ++static avList_t rdList; ++ ++/**************************************************************************** ++* dot11AntennasListTable * ++****************************************************************************/ ++static struct alTbl_data { ++ ++ char UID [ AL_UID_LEN + 1 ]; ++ char ifName [ IFNAME_LEN + 1 ]; ++ ++ long ifIndex; // ifindex of card ++ long antennaListIndex; ++ ++ long supportedTxAntenna; ++ long supportedRxAntenna; ++ long diversitySelectionRx ; ++ ++ long haveSupportedTxAntenna; ++ long haveSupportedRxAntenna; ++ long haveDiversitySelectionRx ; ++ ++} nAl, *al = &nAl; ++ ++static avList_t alList; ++ ++/**************************************************************************** ++* dot11SupportedDataRatesTxTable * ++****************************************************************************/ ++static struct rtTbl_data { ++ ++ char UID [ RT_UID_LEN + 1 ]; ++ char ifName [ IFNAME_LEN + 1 ]; ++ ++ long ifIndex; // ifindex of card ++ long supportedDataRatesTxIndex; ++ ++ long supportedDataRatesTxValue; ++ long haveSupportedDataRatesTxValue; ++ ++} nRt, *rt = &nRt; ++ ++static avList_t rtList; ++ ++/**************************************************************************** ++* dot11SupportedDataRatesRxTable * ++****************************************************************************/ ++static struct rrTbl_data { ++ ++ char UID [ RR_UID_LEN + 1 ]; ++ char ifName [ IFNAME_LEN + 1 ]; ++ ++ long ifIndex; // ifindex of card ++ long supportedDataRatesRxIndex; ++ ++ long supportedDataRatesRxValue; ++ long haveSupportedDataRatesRxValue; ++ ++} nRr, *rr = &nRr; ++ ++static avList_t rrList; ++ ++/**************************************************************************** ++* Wireless Extensions Structures * ++****************************************************************************/ ++static long wepCurrentKey; ++static long haveWepCurrentKey; ++static struct wepTbl_data { ++ ++ long len; ++ char key [ WEP_STR_LEN + 1 ]; ++ long haveKey; ++ ++} wep[4]; ++ ++/**************************************************************************** ++* * ++****************************************************************************/ ++config_require(util_funcs) ++ ++/* function prototypes */ ++ ++void init_ieee802dot11 ( void ); ++FindVarMethod var_ieee802dot11; ++FindVarMethod var_dot11StationConfigTable; ++FindVarMethod var_dot11AuthenticationAlgorithmsTable; ++FindVarMethod var_dot11WEPDefaultKeysTable; ++FindVarMethod var_dot11WEPKeyMappingsTable; ++FindVarMethod var_dot11PrivacyTable; ++FindVarMethod var_dot11OperationTable; ++FindVarMethod var_dot11CountersTable; ++FindVarMethod var_dot11GroupAddressesTable; ++FindVarMethod var_dot11ResourceInfoTable; ++FindVarMethod var_dot11PhyOperationTable; ++FindVarMethod var_dot11PhyAntennaTable; ++FindVarMethod var_dot11PhyTxPowerTable; ++FindVarMethod var_dot11PhyFHSSTable; ++FindVarMethod var_dot11PhyDSSSTable; ++FindVarMethod var_dot11PhyIRTable; ++FindVarMethod var_dot11RegDomainsSupportedTable; ++FindVarMethod var_dot11AntennasListTable; ++FindVarMethod var_dot11SupportedDataRatesTxTable; ++FindVarMethod var_dot11SupportedDataRatesRxTable; ++ ++WriteMethod write_dot11StationID; ++WriteMethod write_dot11MediumOccupancyLimit; ++WriteMethod write_dot11CFPPeriod; ++WriteMethod write_dot11CFPMaxDuration; ++WriteMethod write_dot11AuthenticationResponseTimeOut; ++WriteMethod write_dot11PowerManagementMode; ++WriteMethod write_dot11DesiredSSID; ++WriteMethod write_dot11DesiredBSSType; ++WriteMethod write_dot11OperationalRateSet; ++WriteMethod write_dot11BeaconPeriod; ++WriteMethod write_dot11DTIMPeriod; ++WriteMethod write_dot11AssociationResponseTimeOut; ++WriteMethod write_dot11AuthenticationAlgorithmsEnable; ++WriteMethod write_dot11WEPDefaultKeyValue; ++WriteMethod write_dot11WEPKeyMappingAddress; ++WriteMethod write_dot11WEPKeyMappingWEPOn; ++WriteMethod write_dot11WEPKeyMappingValue; ++WriteMethod write_dot11WEPKeyMappingStatus; ++WriteMethod write_dot11PrivacyInvoked; ++WriteMethod write_dot11WEPDefaultKeyID; ++WriteMethod write_dot11WEPKeyMappingLength; ++WriteMethod write_dot11ExcludeUnencrypted; ++WriteMethod write_dot11RTSThreshold; ++WriteMethod write_dot11ShortRetryLimit; ++WriteMethod write_dot11LongRetryLimit; ++WriteMethod write_dot11FragmentationThreshold; ++WriteMethod write_dot11MaxTransmitMSDULifetime; ++WriteMethod write_dot11MaxReceiveLifetime; ++WriteMethod write_dot11Address; ++WriteMethod write_dot11GroupAddressesStatus; ++WriteMethod write_dot11CurrentRegDomain; ++WriteMethod write_dot11CurrentTxAntenna; ++WriteMethod write_dot11CurrentRxAntenna; ++WriteMethod write_dot11CurrentTxPowerLevel; ++WriteMethod write_dot11CurrentChannelNumber; ++WriteMethod write_dot11CurrentDwellTime; ++WriteMethod write_dot11CurrentSet; ++WriteMethod write_dot11CurrentPattern; ++WriteMethod write_dot11CurrentIndex; ++WriteMethod write_dot11CurrentChannel; ++WriteMethod write_dot11CurrentCCAMode; ++WriteMethod write_dot11EDThreshold; ++WriteMethod write_dot11CCAWatchdogTimerMax; ++WriteMethod write_dot11CCAWatchdogCountMax; ++WriteMethod write_dot11CCAWatchdogTimerMin; ++WriteMethod write_dot11CCAWatchdogCountMin; ++WriteMethod write_dot11SupportedTxAntenna; ++WriteMethod write_dot11SupportedRxAntenna; ++WriteMethod write_dot11DiversitySelectionRx; ++ ++#endif /* _MIBGROUP_IEEE802DOT11_H */ +--- net-snmp-5.1.2-orig/agent/mibgroup/iwlib.h 1970-01-01 01:00:00.000000000 +0100 ++++ net-snmp-5.1.2-5/agent/mibgroup/iwlib.h 2005-03-13 16:17:21.000000000 +0100 +@@ -0,0 +1,502 @@ ++/* ++ * Wireless Tools ++ * ++ * Jean II - HPLB 97->99 - HPL 99->02 ++ * ++ * Common header for the Wireless Extension library... ++ * ++ * This file is released under the GPL license. ++ * Copyright (c) 1997-2002 Jean Tourrilhes ++ */ ++ ++#ifndef IWLIB_H ++#define IWLIB_H ++ ++/*#include "CHANGELOG.h"*/ ++ ++/***************************** INCLUDES *****************************/ ++ ++/* Standard headers */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include /* gethostbyname, getnetbyname */ ++#include /* struct ether_addr */ ++#include /* struct timeval */ ++#include ++ ++/* This is our header selection. Try to hide the mess and the misery :-( ++ * Don't look, you would go blind ;-) */ ++ ++#ifndef LINUX_VERSION_CODE ++#include ++#endif ++ ++/* Kernel headers 2.4.X + Glibc 2.2 - Mandrake 8.0, Debian 2.3, RH 7.1 ++ * Kernel headers 2.2.X + Glibc 2.2 - Slackware 8.0 */ ++#if defined(__GLIBC__) \ ++ && __GLIBC__ == 2 \ ++ && __GLIBC_MINOR__ >= 2 \ ++ && LINUX_VERSION_CODE >= KERNEL_VERSION(2,2,0) ++//#define GLIBC22_HEADERS ++#define GENERIC_HEADERS ++ ++/* Kernel headers 2.4.X + Glibc 2.1 - Debian 2.2 upgraded, RH 7.0 ++ * Kernel headers 2.2.X + Glibc 2.1 - Debian 2.2, RH 6.1 */ ++#elif defined(__GLIBC__) \ ++ && __GLIBC__ == 2 \ ++ && __GLIBC_MINOR__ == 1 \ ++ && LINUX_VERSION_CODE >= KERNEL_VERSION(2,2,0) ++//#define GLIBC_HEADERS ++#define GENERIC_HEADERS ++ ++/* Kernel headers 2.2.X + Glibc 2.0 - Debian 2.1 */ ++#elif defined(__GLIBC__) \ ++ && __GLIBC__ == 2 \ ++ && __GLIBC_MINOR__ == 0 \ ++ && LINUX_VERSION_CODE >= KERNEL_VERSION(2,0,0) \ ++ && LINUX_VERSION_CODE < KERNEL_VERSION(2,1,0) ++#define GLIBC_HEADERS ++#define KLUDGE_HEADERS ++ ++/* Note : is it really worth supporting kernel 2.0.X, knowing that ++ * we require WE v9, which is only available in 2.2.X and higher ? ++ * I guess one could use 2.0.x with an upgraded wireless.h... */ ++ ++/* Kernel headers 2.0.X + Glibc 2.0 - Debian 2.0, RH 5 */ ++#elif defined(__GLIBC__) \ ++ && __GLIBC__ == 2 \ ++ && __GLIBC_MINOR__ == 0 \ ++ && LINUX_VERSION_CODE < KERNEL_VERSION(2,1,0) \ ++ && LINUX_VERSION_CODE >= KERNEL_VERSION(2,0,0) ++#define GLIBC_HEADERS ++ ++/* Kernel headers 2.0.X + libc5 - old systems */ ++#elif defined(_LINUX_C_LIB_VERSION_MAJOR) \ ++ && _LINUX_C_LIB_VERSION_MAJOR == 5 \ ++ && LINUX_VERSION_CODE >= KERNEL_VERSION(2,0,0) \ ++ && LINUX_VERSION_CODE < KERNEL_VERSION(2,1,0) ++#define LIBC5_HEADERS ++ ++/* Unsupported combination */ ++#else ++#error "Your kernel/libc combination is not supported" ++#endif ++ ++#ifdef GENERIC_HEADERS ++/* Proposed by Dr. Michael Rietz , 27.3.2 */ ++/* If this works for all, it might be more stable on the long term - Jean II */ ++#include /* For ARPHRD_ETHER */ ++#include /* For AF_INET & struct sockaddr */ ++#include /* For struct sockaddr_in */ ++#include ++#endif /* GENERIC_HEADERS */ ++ ++#ifdef GLIBC22_HEADERS ++/* Added by Ross G. Miller , 3/28/01 */ ++#include /* For ARPHRD_ETHER */ ++#include /* For AF_INET & struct sockaddr */ ++#include ++#endif /* GLIBC22_HEADERS */ ++ ++#ifdef KLUDGE_HEADERS ++#include ++#endif /* KLUDGE_HEADERS */ ++ ++#ifdef GLIBC_HEADERS ++#include /* For ARPHRD_ETHER */ ++#include /* For AF_INET & struct sockaddr */ ++#include /* For struct sockaddr_in */ ++#endif /* KLUDGE_HEADERS || GLIBC_HEADERS */ ++ ++#ifdef LIBC5_HEADERS ++#include /* For AF_INET & struct sockaddr & socket() */ ++#include /* For ARPHRD_ETHER */ ++#include /* For struct sockaddr_in */ ++#endif /* LIBC5_HEADERS */ ++ ++/* Those 3 headers were previously included in wireless.h */ ++#include /* for "caddr_t" et al */ ++#include /* for "struct sockaddr" et al */ ++#include /* for IFNAMSIZ and co... */ ++ ++#ifdef WEXT_HEADER ++/* Private copy of Wireless extensions */ ++#include WEXT_HEADER ++#else /* !WEXT_HEADER */ ++/* System wide Wireless extensions */ ++#include ++#endif /* !WEXT_HEADER */ ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++/****************************** DEBUG ******************************/ ++ ++ ++/************************ CONSTANTS & MACROS ************************/ ++ ++/* Paths */ ++#define PROC_NET_WIRELESS "/proc/net/wireless" ++#define PROC_NET_DEV "/proc/net/dev" ++ ++/* Some usefull constants */ ++#define KILO 1e3 ++#define MEGA 1e6 ++#define GIGA 1e9 ++/* For doing log10/exp10 without libm */ ++#define LOG10_MAGIC 1.25892541179 ++ ++/* Backward compatibility for Wireless Extension 9 */ ++#ifndef IW_POWER_MODIFIER ++#define IW_POWER_MODIFIER 0x000F /* Modify a parameter */ ++#define IW_POWER_MIN 0x0001 /* Value is a minimum */ ++#define IW_POWER_MAX 0x0002 /* Value is a maximum */ ++#define IW_POWER_RELATIVE 0x0004 /* Value is not in seconds/ms/us */ ++#endif /* IW_POWER_MODIFIER */ ++ ++#ifndef IW_ENCODE_NOKEY ++#define IW_ENCODE_NOKEY 0x0800 /* Key is write only, so not here */ ++#define IW_ENCODE_MODE 0xF000 /* Modes defined below */ ++#endif /* IW_ENCODE_NOKEY */ ++#ifndef IW_ENCODE_TEMP ++#define IW_ENCODE_TEMP 0x0400 /* Temporary key */ ++#endif /* IW_ENCODE_TEMP */ ++ ++/* More backward compatibility */ ++#ifndef SIOCSIWCOMMIT ++#define SIOCSIWCOMMIT SIOCSIWNAME ++#endif /* SIOCSIWCOMMIT */ ++ ++/****************************** TYPES ******************************/ ++ ++/* Shortcuts */ ++typedef struct iw_statistics iwstats; ++typedef struct iw_range iwrange; ++typedef struct iw_param iwparam; ++typedef struct iw_freq iwfreq; ++typedef struct iw_quality iwqual; ++typedef struct iw_priv_args iwprivargs; ++typedef struct sockaddr sockaddr; ++ ++/* Structure for storing all wireless information for each device ++ * This is pretty exhaustive... */ ++typedef struct wireless_info ++{ ++ char name[IFNAMSIZ + 1]; /* Wireless/protocol name */ ++ int has_nwid; ++ iwparam nwid; /* Network ID */ ++ int has_freq; ++ double freq; /* Frequency/channel */ ++ int has_sens; ++ iwparam sens; /* sensitivity */ ++ int has_key; ++ unsigned char key[IW_ENCODING_TOKEN_MAX]; /* Encoding key used */ ++ int key_size; /* Number of bytes */ ++ int key_flags; /* Various flags */ ++ int has_essid; ++ int essid_on; ++ char essid[IW_ESSID_MAX_SIZE + 1]; /* ESSID (extended network) */ ++ int has_nickname; ++ char nickname[IW_ESSID_MAX_SIZE + 1]; /* NickName */ ++ int has_ap_addr; ++ sockaddr ap_addr; /* Access point address */ ++ int has_bitrate; ++ iwparam bitrate; /* Bit rate in bps */ ++ int has_rts; ++ iwparam rts; /* RTS threshold in bytes */ ++ int has_frag; ++ iwparam frag; /* Fragmentation threshold in bytes */ ++ int has_mode; ++ int mode; /* Operation mode */ ++ int has_power; ++ iwparam power; /* Power management parameters */ ++ int has_txpower; ++ iwparam txpower; /* Transmit Power in dBm */ ++ int has_retry; ++ iwparam retry; /* Retry limit or lifetime */ ++ ++ /* Stats */ ++ iwstats stats; ++ int has_stats; ++ iwrange range; ++ int has_range; ++} wireless_info; ++ ++/* Structure for storing all wireless information for each device ++ * This is a cut down version of the one above, containing only ++ * the things *truly* needed to configure a card. ++ * Don't add other junk, I'll remove it... */ ++typedef struct wireless_config ++{ ++ char name[IFNAMSIZ + 1]; /* Wireless/protocol name */ ++ int has_nwid; ++ iwparam nwid; /* Network ID */ ++ int has_freq; ++ double freq; /* Frequency/channel */ ++ int has_key; ++ unsigned char key[IW_ENCODING_TOKEN_MAX]; /* Encoding key used */ ++ int key_size; /* Number of bytes */ ++ int key_flags; /* Various flags */ ++ int has_essid; ++ int essid_on; ++ char essid[IW_ESSID_MAX_SIZE + 1]; /* ESSID (extended network) */ ++ int has_mode; ++ int mode; /* Operation mode */ ++} wireless_config; ++ ++typedef struct stream_descr ++{ ++ char * end; /* End of the stream */ ++ char * current; /* Current event in stream of events */ ++ char * value; /* Current value in event */ ++} stream_descr; ++ ++/* Prototype for handling display of each single interface on the ++ * system - see iw_enum_devices() */ ++typedef int (*iw_enum_handler)(int skfd, ++ char * ifname, ++ char * args[], ++ int count); ++ ++/**************************** PROTOTYPES ****************************/ ++/* ++ * All the functions in iwcommon.c ++ */ ++ ++/* ---------------------- SOCKET SUBROUTINES -----------------------*/ ++int ++ iw_sockets_open(void); ++void ++ iw_enum_devices(int skfd, ++ iw_enum_handler fn, ++ char * args[], ++ int count); ++/* --------------------- WIRELESS SUBROUTINES ----------------------*/ ++int ++ iw_get_range_info(int skfd, ++ char * ifname, ++ iwrange * range); ++int ++ iw_print_version_info(char * toolname); ++int ++ iw_get_priv_info(int skfd, ++ char * ifname, ++ iwprivargs * priv, ++ int maxpriv); ++int ++ iw_get_basic_config(int skfd, ++ char * ifname, ++ wireless_config * info); ++int ++ iw_set_basic_config(int skfd, ++ char * ifname, ++ wireless_config * info); ++/* --------------------- PROTOCOL SUBROUTINES --------------------- */ ++int ++ iw_protocol_compare(char * protocol1, ++ char * protocol2); ++/* -------------------- FREQUENCY SUBROUTINES --------------------- */ ++void ++ iw_float2freq(double in, ++ iwfreq * out); ++double ++ iw_freq2float(iwfreq * in); ++void ++ iw_print_freq(char * buffer, ++ double freq); ++int ++ iw_freq_to_channel(double freq, ++ struct iw_range * range); ++void ++ iw_print_bitrate(char * buffer, ++ int bitrate); ++/* ---------------------- POWER SUBROUTINES ----------------------- */ ++int ++ iw_dbm2mwatt(int in); ++int ++ iw_mwatt2dbm(int in); ++/* -------------------- STATISTICS SUBROUTINES -------------------- */ ++int ++ iw_get_stats(int skfd, ++ char * ifname, ++ iwstats * stats); ++void ++ iw_print_stats(char * buffer, ++ iwqual * qual, ++ iwrange * range, ++ int has_range); ++/* --------------------- ENCODING SUBROUTINES --------------------- */ ++void ++ iw_print_key(char * buffer, ++ unsigned char * key, ++ int key_size, ++ int key_flags); ++int ++ iw_in_key(char * input, ++ unsigned char * key); ++int ++ iw_in_key_full(int skfd, ++ char * ifname, ++ char * input, ++ unsigned char * key, ++ __u16 * flags); ++/* ----------------- POWER MANAGEMENT SUBROUTINES ----------------- */ ++void ++ iw_print_pm_value(char * buffer, ++ int value, ++ int flags); ++void ++ iw_print_pm_mode(char * buffer, ++ int flags); ++/* --------------- RETRY LIMIT/LIFETIME SUBROUTINES --------------- */ ++#if WIRELESS_EXT > 10 ++void ++ iw_print_retry_value(char * buffer, ++ int value, ++ int flags); ++#endif ++/* ----------------------- TIME SUBROUTINES ----------------------- */ ++void ++ iw_print_timeval(char * buffer, ++ const struct timeval * time); ++/* --------------------- ADDRESS SUBROUTINES ---------------------- */ ++int ++ iw_check_mac_addr_type(int skfd, ++ char * ifname); ++int ++ iw_check_if_addr_type(int skfd, ++ char * ifname); ++#if 0 ++int ++ iw_check_addr_type(int skfd, ++ char * ifname); ++#endif ++void ++ iw_ether_ntop(const struct ether_addr* eth, char* buf); ++char* ++ iw_ether_ntoa(const struct ether_addr* eth); ++int ++ iw_ether_aton(const char* bufp, struct ether_addr* eth); ++int ++ iw_in_inet(char *bufp, struct sockaddr *sap); ++int ++ iw_in_addr(int skfd, ++ char * ifname, ++ char * bufp, ++ struct sockaddr * sap); ++/* ----------------------- MISC SUBROUTINES ------------------------ */ ++int ++ iw_get_priv_size(int args); ++ ++#if WIRELESS_EXT > 13 ++/* ---------------------- EVENT SUBROUTINES ---------------------- */ ++void ++ iw_init_event_stream(struct stream_descr * stream, ++ char * data, ++ int len); ++int ++ iw_extract_event_stream(struct stream_descr * stream, ++ struct iw_event * iwe); ++#endif /* WIRELESS_EXT > 13 */ ++ ++/**************************** VARIABLES ****************************/ ++ ++extern const char * const iw_operation_mode[]; ++#define IW_NUM_OPER_MODE 7 ++ ++/************************* INLINE FUNTIONS *************************/ ++/* ++ * Functions that are so simple that it's more efficient inlining them ++ */ ++ ++/* ++ * Note : I've defined wrapper for the ioctl request so that ++ * it will be easier to migrate to other kernel API if needed ++ */ ++ ++/*------------------------------------------------------------------*/ ++/* ++ * Wrapper to push some Wireless Parameter in the driver ++ */ ++static inline int ++iw_set_ext(int skfd, /* Socket to the kernel */ ++ char * ifname, /* Device name */ ++ int request, /* WE ID */ ++ struct iwreq * pwrq) /* Fixed part of the request */ ++{ ++ /* Set device name */ ++ strncpy(pwrq->ifr_name, ifname, IFNAMSIZ); ++ /* Do the request */ ++ return(ioctl(skfd, request, pwrq)); ++} ++ ++/*------------------------------------------------------------------*/ ++/* ++ * Wrapper to extract some Wireless Parameter out of the driver ++ */ ++static inline int ++iw_get_ext(int skfd, /* Socket to the kernel */ ++ char * ifname, /* Device name */ ++ int request, /* WE ID */ ++ struct iwreq * pwrq) /* Fixed part of the request */ ++{ ++ /* Set device name */ ++ strncpy(pwrq->ifr_name, ifname, IFNAMSIZ); ++ /* Do the request */ ++ return(ioctl(skfd, request, pwrq)); ++} ++ ++/*------------------------------------------------------------------*/ ++/* Backwards compatability ++ * Actually, those form are much easier to use when dealing with ++ * struct sockaddr... */ ++static inline char* ++iw_pr_ether(char* bufp, const unsigned char* addr) ++{ ++ iw_ether_ntop((const struct ether_addr *) addr, bufp); ++ return bufp; ++} ++/* Backwards compatability */ ++static inline int ++iw_in_ether(const char *bufp, struct sockaddr *sap) ++{ ++ sap->sa_family = ARPHRD_ETHER; ++ return iw_ether_aton(bufp, (struct ether_addr *) sap->sa_data) ? 0 : -1; ++} ++ ++/*------------------------------------------------------------------*/ ++/* ++ * Create an Ethernet broadcast address ++ */ ++static inline void ++iw_broad_ether(struct sockaddr *sap) ++{ ++ sap->sa_family = ARPHRD_ETHER; ++ memset((char *) sap->sa_data, 0xFF, ETH_ALEN); ++} ++ ++/*------------------------------------------------------------------*/ ++/* ++ * Create an Ethernet NULL address ++ */ ++static inline void ++iw_null_ether(struct sockaddr *sap) ++{ ++ sap->sa_family = ARPHRD_ETHER; ++ memset((char *) sap->sa_data, 0x00, ETH_ALEN); ++} ++ ++#ifdef __cplusplus ++} ++#endif ++ ++#endif /* IWLIB_H */