From: Thibaut VARÈNE Date: Sat, 21 Mar 2020 12:07:23 +0000 (+0100) Subject: ath79/mikrotik: use routerbootpart partitions X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=8f90dbfd1ff0b0c67a11d3960ca3c2b4384c4abc;p=openwrt%2Fstaging%2Fjow.git ath79/mikrotik: use routerbootpart partitions Enable routerbootpart partitions on MikroTik devices. Tested-by: Roger Pueyo Centelles Signed-off-by: Thibaut VARÈNE --- diff --git a/target/linux/ath79/dts/qca9556_mikrotik_routerboard-wap-g-5hact2hnd.dts b/target/linux/ath79/dts/qca9556_mikrotik_routerboard-wap-g-5hact2hnd.dts index 74cf1315b6..a0190760fb 100644 --- a/target/linux/ath79/dts/qca9556_mikrotik_routerboard-wap-g-5hact2hnd.dts +++ b/target/linux/ath79/dts/qca9556_mikrotik_routerboard-wap-g-5hact2hnd.dts @@ -84,37 +84,33 @@ label = "RouterBoot"; reg = <0x0 0x20000>; read-only; - compatible = "fixed-partitions"; + compatible = "mikrotik,routerboot-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "bootloader1"; - reg = <0x0 0xe000>; + reg = <0x0 0x0>; read-only; }; - hard_config: partition@e000 { - label = "hard_config"; - reg = <0xe000 0x1000>; + hard_config: hard_config { read-only; }; - partition@f000 { - label = "bios"; - reg = <0xf000 0x1000>; + bios { + size = <0x1000>; read-only; }; partition@10000 { label = "bootloader2"; - reg = <0x10000 0xf000>; + reg = <0x10000 0x0>; read-only; }; - partition@1f000 { + soft_config { label = "soft_config"; - reg = <0x1f000 0x1000>; }; }; diff --git a/target/linux/ath79/dts/qca9558_mikrotik_routerboard-922uags-5hpacd.dts b/target/linux/ath79/dts/qca9558_mikrotik_routerboard-922uags-5hpacd.dts index dd4d523368..7377953f78 100644 --- a/target/linux/ath79/dts/qca9558_mikrotik_routerboard-922uags-5hpacd.dts +++ b/target/linux/ath79/dts/qca9558_mikrotik_routerboard-922uags-5hpacd.dts @@ -99,32 +99,25 @@ spi-max-frequency = <25000000>; partitions { - compatible = "fixed-partitions"; + compatible = "mikrotik,routerboot-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "routerboot"; - reg = <0x0000000 0x000c000>; + reg = <0x0 0x0>; read-only; }; - hard_config: partition@c000 { - label = "hard_config"; - reg = <0x000c000 0x0001000>; + hard_config: hard_config { read-only; }; - partition@d000 { - label = "bios"; - reg = <0x000d000 0x0001000>; + bios { read-only; }; - partition@e000 { - label = "soft_config"; - reg = <0x000e000 0x0001000>; - read-only; + soft_config { }; }; };