From: Sungbo Eo Date: Fri, 18 Sep 2020 13:31:59 +0000 (+0900) Subject: ipq40xx: improve support for Edgecore ECW5211 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=8f29e36963e799c7aa5362bb5ad4c303890dc1c3;p=openwrt%2Fstaging%2Flynxis.git ipq40xx: improve support for Edgecore ECW5211 This adds several stylistic and functional improvements of the recently added Edgecore ECW5211, especially: * Drop the local BDFs as those are already in the upstream under different names * Add SPDX tag to DTS * Add label MAC address * Move LED trigger to DTS * Remove unnecessary status="okay" * Disable unused SS USB phy as the USB port only supports USB 2.0 * Make uboot-env partition writable * Remove qcom,poll_required_dynamic property as the driver does not use it * Tidy up the device recipe Fixes: 4488b260a02e ("ipq40xx: add Edgecore ECW5211 support") Signed-off-by: Sungbo Eo Acked-by: Robert Marko --- diff --git a/package/firmware/ipq-wifi/Makefile b/package/firmware/ipq-wifi/Makefile index 39e22b50d3..9aa6852046 100644 --- a/package/firmware/ipq-wifi/Makefile +++ b/package/firmware/ipq-wifi/Makefile @@ -31,7 +31,6 @@ ALLWIFIBOARDS:= \ buffalo_wtr-m2133hp \ cellc_rtl30vw \ dlink_dap2610 \ - edgecore_ecw5211 \ edgecore_ecw5410 \ edgecore_oap100 \ engenius_eap2200 \ @@ -110,7 +109,6 @@ $(eval $(call generate-ipq-wifi-package,avm_fritzrepeater-1200,AVM FRITZRepeater $(eval $(call generate-ipq-wifi-package,buffalo_wtr-m2133hp,Buffalo WTR-M2133HP)) $(eval $(call generate-ipq-wifi-package,cellc_rtl30vw, Cell C RTL30VW)) $(eval $(call generate-ipq-wifi-package,dlink_dap2610,D-Link DAP-2610)) -$(eval $(call generate-ipq-wifi-package,edgecore_ecw5211,Edgecore ECW5211)) $(eval $(call generate-ipq-wifi-package,edgecore_ecw5410,Edgecore ECW5410)) $(eval $(call generate-ipq-wifi-package,edgecore_oap100,Edgecore OAP100)) $(eval $(call generate-ipq-wifi-package,engenius_eap2200,EnGenius EAP2200)) diff --git a/package/firmware/ipq-wifi/board-edgecore_ecw5211.qca4019 b/package/firmware/ipq-wifi/board-edgecore_ecw5211.qca4019 deleted file mode 100644 index 340cfcc7a2..0000000000 Binary files a/package/firmware/ipq-wifi/board-edgecore_ecw5211.qca4019 and /dev/null differ diff --git a/target/linux/ipq40xx/base-files/etc/board.d/01_leds b/target/linux/ipq40xx/base-files/etc/board.d/01_leds index 8a87b68532..3e0f3ab258 100755 --- a/target/linux/ipq40xx/base-files/etc/board.d/01_leds +++ b/target/linux/ipq40xx/base-files/etc/board.d/01_leds @@ -26,12 +26,6 @@ avm,fritzbox-7530 |\ glinet,gl-b1300) ucidef_set_led_wlan "wlan" "WLAN" "green:wlan" "phy0tpt" ;; -edgecore,ecw5211 |\ -zyxel,nbg6617 |\ -zyxel,wre6606) - ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy0tpt" - ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy1tpt" - ;; edgecore,oap100) ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wlan2g" "phy0tpt" ucidef_set_led_wlan "wlan5g" "WLAN5G" "blue:wlan5g" "phy1tpt" @@ -67,6 +61,11 @@ qxwlan,e2600ac-c2) ucidef_set_led_wlan "wlan2g" "WLAN0" "green:wlan0" "phy0tpt" ucidef_set_led_wlan "wlan5g" "WLAN1" "green:wlan1" "phy1tpt" ;; +zyxel,nbg6617 |\ +zyxel,wre6606) + ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy0tpt" + ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy1tpt" + ;; esac board_config_flush diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts index 244dfac750..0ee8d1a52e 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts @@ -1,3 +1,5 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + #include "qcom-ipq4019.dtsi" #include #include @@ -12,6 +14,7 @@ led-failsafe = &led_power; led-running = &led_power; led-upgrade = &led_power; + label-mac-device = &gmac0; }; chosen { @@ -39,11 +42,13 @@ wlan2g { label = "green:wlan2g"; gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tpt"; }; wlan5g { label = "green:wlan5g"; gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy1tpt"; }; }; @@ -52,13 +57,6 @@ status = "okay"; }; - mdio@90000 { - status = "okay"; - - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - }; - ess-psgmii@98000 { status = "okay"; }; @@ -75,8 +73,6 @@ }; tcsr@194b000 { - status = "okay"; - compatible = "qcom,tcsr"; reg = <0x194b000 0x100>; qcom,usb-hsphy-mode-select = ; @@ -94,12 +90,17 @@ qcom,wifi_noc_memtype_m0_m2 = ; }; - usb2: usb2@60f8800 { + usb2@60f8800 { status = "okay"; }; - usb3: usb3@8af8800 { + usb3@8af8800 { status = "okay"; + + dwc3@8a00000 { + phys = <&usb3_hs_phy>; + phy-names = "usb2-phy"; + }; }; crypto@8e3a000 { @@ -112,6 +113,9 @@ ess-switch@c000000 { status = "okay"; + + switch_lan_bmp = <0x10>; + switch_wan_bmp = <0x20>; }; edma@c080000 { @@ -182,8 +186,6 @@ cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 4 GPIO_ACTIVE_HIGH>; flash@0 { - status = "okay"; - compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <24000000>; @@ -224,9 +226,8 @@ }; partition@e0000 { - label = "0:APPSBLENV"; /* uboot env*/ + label = "0:APPSBLENV"; /* uboot env */ reg = <0x000e0000 0x00010000>; - read-only; }; partition@f0000 { @@ -243,9 +244,7 @@ }; }; - spi-nand@1 { - status = "okay"; - + flash@1 { compatible = "spi-nand"; reg = <1>; spi-max-frequency = <24000000>; @@ -286,34 +285,33 @@ status = "okay"; }; +&mdio { + status = "okay"; + + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; +}; + &gmac0 { qcom,poll_required = <1>; - qcom,poll_required_dynamic = <1>; qcom,phy_mdio_addr = <4>; vlan_tag = <2 0x20>; }; &gmac1 { qcom,poll_required = <1>; - qcom,poll_required_dynamic = <1>; qcom,phy_mdio_addr = <3>; vlan_tag = <1 0x10>; }; &wifi0 { status = "okay"; - - qcom,ath10k-calibration-variant = "Edgecore-ECW5211"; }; &wifi1 { status = "okay"; - qcom,ath10k-calibration-variant = "Edgecore-ECW5211"; -}; - -&usb3_ss_phy { - status = "okay"; + qcom,ath10k-calibration-variant = "ALFA-Network-AP120C-AC"; }; &usb3_hs_phy { diff --git a/target/linux/ipq40xx/image/Makefile b/target/linux/ipq40xx/image/Makefile index 6e5620a140..142896bde8 100644 --- a/target/linux/ipq40xx/image/Makefile +++ b/target/linux/ipq40xx/image/Makefile @@ -347,12 +347,12 @@ TARGET_DEVICES += dlink_dap-2610 define Device/edgecore_ecw5211 $(call Device/FitImage) $(call Device/UbiFit) - DEVICE_TITLE := Edgecore ECW5211 + DEVICE_VENDOR := Edgecore + DEVICE_MODEL := ECW5211 + SOC := qcom-ipq4018 BLOCKSIZE := 128k PAGESIZE := 2048 - DEVICE_DTS_CONFIG := config@ap.dk01.1-c2 - DEVICE_DTS := qcom-ipq4018-ecw5211 - DEVICE_PACKAGES := ipq-wifi-edgecore_ecw5211 kmod-tpm-i2c-atmel kmod-usb-acm uboot-envtools + DEVICE_PACKAGES := kmod-tpm-i2c-atmel kmod-usb-acm uboot-envtools endef TARGET_DEVICES += edgecore_ecw5211