From: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Date: Wed, 12 Sep 2012 13:29:23 +0000 (+0530)
Subject: ath9k: fill led_pin before drv_start
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=8f176a3a16d124285cecd6c53b70689eb3b9ba36;p=openwrt%2Fstaging%2Fblogic.git

ath9k: fill led_pin before drv_start

Ensure that led pin is filled and set to OFF before starting
the driver. With recent changes, drv_start is being called even
before led_init is being completed. This is causing led is always
OFF on driver load when the interface is UP. This patch splits the
led init and fills the led pin before register hw.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---

diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 96b8331ef9e7..fd24535677a6 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -537,6 +537,7 @@ struct ath9k_wow_pattern {
 #ifdef CONFIG_MAC80211_LEDS
 void ath_init_leds(struct ath_softc *sc);
 void ath_deinit_leds(struct ath_softc *sc);
+void ath_fill_led_pin(struct ath_softc *sc);
 #else
 static inline void ath_init_leds(struct ath_softc *sc)
 {
@@ -545,6 +546,9 @@ static inline void ath_init_leds(struct ath_softc *sc)
 static inline void ath_deinit_leds(struct ath_softc *sc)
 {
 }
+static inline void ath_fill_led_pin(struct ath_softc *sc)
+{
+}
 #endif
 
 /*******************************/
diff --git a/drivers/net/wireless/ath/ath9k/gpio.c b/drivers/net/wireless/ath/ath9k/gpio.c
index 45f24220b16e..1934cca8a6cc 100644
--- a/drivers/net/wireless/ath/ath9k/gpio.c
+++ b/drivers/net/wireless/ath/ath9k/gpio.c
@@ -44,25 +44,6 @@ void ath_init_leds(struct ath_softc *sc)
 	if (AR_SREV_9100(sc->sc_ah))
 		return;
 
-	if (sc->sc_ah->led_pin < 0) {
-		if (AR_SREV_9287(sc->sc_ah))
-			sc->sc_ah->led_pin = ATH_LED_PIN_9287;
-		else if (AR_SREV_9485(sc->sc_ah))
-			sc->sc_ah->led_pin = ATH_LED_PIN_9485;
-		else if (AR_SREV_9300(sc->sc_ah))
-			sc->sc_ah->led_pin = ATH_LED_PIN_9300;
-		else if (AR_SREV_9462(sc->sc_ah) || AR_SREV_9565(sc->sc_ah))
-			sc->sc_ah->led_pin = ATH_LED_PIN_9462;
-		else
-			sc->sc_ah->led_pin = ATH_LED_PIN_DEF;
-	}
-
-	/* Configure gpio 1 for output */
-	ath9k_hw_cfg_output(sc->sc_ah, sc->sc_ah->led_pin,
-			    AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
-	/* LED off, active low */
-	ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 1);
-
 	if (!led_blink)
 		sc->led_cdev.default_trigger =
 			ieee80211_get_radio_led_name(sc->hw);
@@ -78,6 +59,31 @@ void ath_init_leds(struct ath_softc *sc)
 
 	sc->led_registered = true;
 }
+
+void ath_fill_led_pin(struct ath_softc *sc)
+{
+	struct ath_hw *ah = sc->sc_ah;
+
+	if (AR_SREV_9100(ah) || (ah->led_pin >= 0))
+		return;
+
+	if (AR_SREV_9287(ah))
+		ah->led_pin = ATH_LED_PIN_9287;
+	else if (AR_SREV_9485(sc->sc_ah))
+		ah->led_pin = ATH_LED_PIN_9485;
+	else if (AR_SREV_9300(sc->sc_ah))
+		ah->led_pin = ATH_LED_PIN_9300;
+	else if (AR_SREV_9462(sc->sc_ah) || AR_SREV_9565(sc->sc_ah))
+		ah->led_pin = ATH_LED_PIN_9462;
+	else
+		ah->led_pin = ATH_LED_PIN_DEF;
+
+	/* Configure gpio 1 for output */
+	ath9k_hw_cfg_output(ah, ah->led_pin, AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
+
+	/* LED off, active low */
+	ath9k_hw_set_gpio(ah, ah->led_pin, 1);
+}
 #endif
 
 /*******************/
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index f3ce5ca2f1d3..706255222598 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -597,6 +597,7 @@ static int ath9k_init_softc(u16 devid, struct ath_softc *sc,
 
 	ath9k_cmn_init_crypto(sc->sc_ah);
 	ath9k_init_misc(sc);
+	ath_fill_led_pin(sc);
 
 	if (common->bus_ops->aspm_init)
 		common->bus_ops->aspm_init(common);