From: Ivan Deng <hongba@rocketmail.com>
Date: Thu, 16 Jan 2025 08:53:36 +0000 (-0800)
Subject: qualcommax: add missing WAN LED support to Spectrum SAX1V1K routers
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=8e78bc39a38d2a82818bcae467d3bcbbbe8531f3;p=openwrt%2Fstaging%2Fnbd.git

qualcommax: add missing WAN LED support to Spectrum SAX1V1K routers

Fixed an issue where both WAN LEDs light up before plugging in the
ethernet cable and no blinking regardless of WAN network activity.

Updated the LED configuration to reflect proper status:
Green indicates 2.5Gb connection speed.
Yellow indicates other connection speed and traffic activity.

This resolves inconsistent WAN LED behavior on Spectrum SAX1V1K routers.

Signed-off-by: Ivan Deng <hongba@rocketmail.com>
Link: https://github.com/openwrt/openwrt/pull/17623
Signed-off-by: Robert Marko <robimarko@gmail.com>
---

diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-sax1v1k.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-sax1v1k.dts
index fbb652a097..15ca4d8ec4 100644
--- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-sax1v1k.dts
+++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-sax1v1k.dts
@@ -137,6 +137,27 @@
 		reg = <28>;
 		reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
 		reset-deassert-us = <10000>;
+		
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_YELLOW>;
+				function = LED_FUNCTION_WAN;
+				default-state = "keep";
+				active-low;
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_WAN;
+				default-state = "keep";
+				active-low;
+			};
+		};
 	};
 };
 
diff --git a/target/linux/qualcommax/ipq807x/base-files/etc/board.d/01_leds b/target/linux/qualcommax/ipq807x/base-files/etc/board.d/01_leds
index b5c3cbc736..ae941657f9 100644
--- a/target/linux/qualcommax/ipq807x/base-files/etc/board.d/01_leds
+++ b/target/linux/qualcommax/ipq807x/base-files/etc/board.d/01_leds
@@ -16,7 +16,8 @@ asus,rt-ax89x)
 	ucidef_set_led_netdev "sfp" "SFP" "white:sfp" "10g-sfp"
 	ucidef_set_led_netdev "wan" "WAN" "white:wan" "wan"
 	;;
-dynalink,dl-wrx36)
+dynalink,dl-wrx36|\
+spectrum,sax1v1k)
 	ucidef_set_led_netdev "wan-port-link-green" "WAN-PORT-LINK-GREEN" "90000.mdio-1:1c:green:wan" "wan" "link_2500"
 	ucidef_set_led_netdev "wan-port-link-yellow" "WAN-PORT-LINK-YELLOW" "90000.mdio-1:1c:yellow:wan" "wan" "tx rx link_10 link_100 link_1000"
 	;;