From: Takashi Iwai Date: Wed, 8 Aug 2012 15:26:54 +0000 (+0200) Subject: ALSA: hda - Add missing SPDIF I/O setup for CA0132 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=8e13fc1c5f694a6ae4032c7f94103c137136733f;p=openwrt%2Fstaging%2Fblogic.git ALSA: hda - Add missing SPDIF I/O setup for CA0132 CA0132 driver had some codes to handle the S/PDIF I/O, but the actual setups of pins and converters were missing. Now the pins are added. Also, fixed a few points triggering invalid codec verbs and mixer elements since the digital I/O audio widgets on CA0132 have no amp. Signed-off-by: Takashi Iwai --- diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index 31512a0f1d07..9c0ec0a55bef 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -246,7 +246,7 @@ static void init_output(struct hda_codec *codec, hda_nid_t pin, hda_nid_t dac) AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE); } - if (dac) + if (dac && (get_wcaps(codec, dac) & AC_WCAP_OUT_AMP)) snd_hda_codec_write(codec, dac, 0, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO); } @@ -261,7 +261,7 @@ static void init_input(struct hda_codec *codec, hda_nid_t pin, hda_nid_t adc) AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)); } - if (adc) + if (adc && (get_wcaps(codec, adc) & AC_WCAP_IN_AMP)) snd_hda_codec_write(codec, adc, 0, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)); } @@ -841,18 +841,16 @@ static int ca0132_build_controls(struct hda_codec *codec) spec->dig_out); if (err < 0) return err; - err = add_out_volume(codec, spec->dig_out, "IEC958"); + err = snd_hda_create_spdif_share_sw(codec, &spec->multiout); if (err < 0) return err; + /* spec->multiout.share_spdif = 1; */ } if (spec->dig_in) { err = snd_hda_create_spdif_in_ctls(codec, spec->dig_in); if (err < 0) return err; - err = add_in_volume(codec, spec->dig_in, "IEC958"); - if (err < 0) - return err; } return 0; } @@ -912,6 +910,16 @@ static void ca0132_config(struct hda_codec *codec) spec->input_labels[1] = "Line"; spec->adcs[1] = 0x08; spec->num_inputs = 2; + + /* SPDIF I/O */ + spec->dig_out = 0x05; + spec->multiout.dig_out_nid = spec->dig_out; + cfg->dig_out_pins[0] = 0x0c; + cfg->dig_outs = 1; + cfg->dig_out_type[0] = HDA_PCM_TYPE_SPDIF; + spec->dig_in = 0x09; + cfg->dig_in_pin = 0x0e; + cfg->dig_in_type = HDA_PCM_TYPE_SPDIF; } static void ca0132_init_chip(struct hda_codec *codec)