From: Thomas Reifferscheid Date: Fri, 7 Apr 2017 10:25:10 +0000 (+0200) Subject: ipq8064: Fix dwc3 module unloading X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=8db079a9ff1756059250b801617a20baba214684;p=openwrt%2Fstaging%2Fjogo.git ipq8064: Fix dwc3 module unloading The patch follows the qualcomm code comments setting SSUSB_CTRL_TEST_POWERDOWN to 0x1 and is testing and clearing the bit during USB superspeed PHY init. According to Andy Gross it needs to be BIT(26). Signed-off-by: Thomas Reifferscheid Acked-by: Andy Gross --- diff --git a/target/linux/ipq806x/patches-4.9/0032-phy-add-qcom-dwc3-phy.patch b/target/linux/ipq806x/patches-4.9/0032-phy-add-qcom-dwc3-phy.patch index 39e918f193..261836e2c3 100644 --- a/target/linux/ipq806x/patches-4.9/0032-phy-add-qcom-dwc3-phy.patch +++ b/target/linux/ipq806x/patches-4.9/0032-phy-add-qcom-dwc3-phy.patch @@ -39,7 +39,7 @@ Signed-off-by: Andy Gross +obj-$(CONFIG_PHY_QCOM_DWC3) += phy-qcom-dwc3.o --- /dev/null +++ b/drivers/phy/phy-qcom-dwc3.c -@@ -0,0 +1,484 @@ +@@ -0,0 +1,492 @@ +/* Copyright (c) 2014-2015, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify @@ -99,7 +99,7 @@ Signed-off-by: Andy Gross + +/* PHY_CTRL_REG */ +#define SSUSB_CTRL_REF_USE_PAD BIT(28) -+#define SSUSB_CTRL_TEST_POWERDOWN BIT(27) ++#define SSUSB_CTRL_TEST_POWERDOWN BIT(26) +#define SSUSB_CTRL_LANE0_PWR_PRESENT BIT(24) +#define SSUSB_CTRL_SS_PHY_EN BIT(8) +#define SSUSB_CTRL_SS_PHY_RESET BIT(7) @@ -331,6 +331,14 @@ Signed-off-by: Andy Gross + + /* reset phy */ + data = readl(phy_dwc3->base + SSUSB_PHY_CTRL_REG); ++ ++ /* Test and clear SSUSB_CTRL_TEST_POWERDOWN */ ++ if (data & SSUSB_CTRL_TEST_POWERDOWN) { ++ qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG, ++ SSUSB_CTRL_TEST_POWERDOWN, 0x0); ++ data = readl(phy_dwc3->base + SSUSB_PHY_CTRL_REG); ++ } ++ + writel(data | SSUSB_CTRL_SS_PHY_RESET, + phy_dwc3->base + SSUSB_PHY_CTRL_REG); + usleep_range(2000, 2200); @@ -420,7 +428,7 @@ Signed-off-by: Andy Gross + qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG, + SSUSB_CTRL_REF_USE_PAD, 0x0); + qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG, -+ SSUSB_CTRL_TEST_POWERDOWN, 0x0); ++ SSUSB_CTRL_TEST_POWERDOWN, SSUSB_CTRL_TEST_POWERDOWN); + + return 0; +}