From: Yaniv Rosner <yanivr@broadcom.com>
Date: Wed, 7 Sep 2011 00:48:11 +0000 (+0000)
Subject: bnx2x: Fix ethtool advertisement
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=8d661637407963d1990e53c36d53ace123219da3;p=openwrt%2Fstaging%2Fblogic.git

bnx2x: Fix ethtool advertisement

Enable changing advertisement settings via ethtool.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Reviewed-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---

diff --git a/drivers/net/bnx2x/bnx2x_ethtool.c b/drivers/net/bnx2x/bnx2x_ethtool.c
index 0ceb6c7b1238..cf3e47914dd7 100644
--- a/drivers/net/bnx2x/bnx2x_ethtool.c
+++ b/drivers/net/bnx2x/bnx2x_ethtool.c
@@ -363,13 +363,50 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 		}
 
 		/* advertise the requested speed and duplex if supported */
-		cmd->advertising &= bp->port.supported[cfg_idx];
+		if (cmd->advertising & ~(bp->port.supported[cfg_idx])) {
+			DP(NETIF_MSG_LINK, "Advertisement parameters "
+					   "are not supported\n");
+			return -EINVAL;
+		}
 
 		bp->link_params.req_line_speed[cfg_idx] = SPEED_AUTO_NEG;
-		bp->link_params.req_duplex[cfg_idx] = DUPLEX_FULL;
-		bp->port.advertising[cfg_idx] |= (ADVERTISED_Autoneg |
+		bp->link_params.req_duplex[cfg_idx] = cmd->duplex;
+		bp->port.advertising[cfg_idx] = (ADVERTISED_Autoneg |
 					 cmd->advertising);
+		if (cmd->advertising) {
+
+			bp->link_params.speed_cap_mask[cfg_idx] = 0;
+			if (cmd->advertising & ADVERTISED_10baseT_Half) {
+				bp->link_params.speed_cap_mask[cfg_idx] |=
+				PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF;
+			}
+			if (cmd->advertising & ADVERTISED_10baseT_Full)
+				bp->link_params.speed_cap_mask[cfg_idx] |=
+				PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL;
 
+			if (cmd->advertising & ADVERTISED_100baseT_Full)
+				bp->link_params.speed_cap_mask[cfg_idx] |=
+				PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL;
+
+			if (cmd->advertising & ADVERTISED_100baseT_Half) {
+				bp->link_params.speed_cap_mask[cfg_idx] |=
+				     PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF;
+			}
+			if (cmd->advertising & ADVERTISED_1000baseT_Half) {
+				bp->link_params.speed_cap_mask[cfg_idx] |=
+					PORT_HW_CFG_SPEED_CAPABILITY_D0_1G;
+			}
+			if (cmd->advertising & (ADVERTISED_1000baseT_Full |
+						ADVERTISED_1000baseKX_Full))
+				bp->link_params.speed_cap_mask[cfg_idx] |=
+					PORT_HW_CFG_SPEED_CAPABILITY_D0_1G;
+
+			if (cmd->advertising & (ADVERTISED_10000baseT_Full |
+						ADVERTISED_10000baseKX4_Full |
+						ADVERTISED_10000baseKR_Full))
+				bp->link_params.speed_cap_mask[cfg_idx] |=
+					PORT_HW_CFG_SPEED_CAPABILITY_D0_10G;
+		}
 	} else { /* forced speed */
 		/* advertise the requested speed and duplex if supported */
 		switch (speed) {