From: Jan Forman Date: Fri, 28 May 2021 07:45:52 +0000 (+0200) Subject: ath79: Add support for D-Link DIR-869-A1 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=8d618a3186e0979bcf4db407cb8dd232200919a8;p=openwrt%2Fstaging%2Fblogic.git ath79: Add support for D-Link DIR-869-A1 Specifications The D-Link EXO AC1750 (DIR-869) router released in 2016. It is powered by Qualcomm Atheros QCA9563 @ 750 MHz chipset, 64 MB RAM and 16 MB flash. 10/100/1000 Gigabit Ethernet WAN port Four 10/100/1000 Gigabit Ethernet LAN ports Power Button, Reset Button, WPS Button, Mode Switch Flashing 1. Upload factory.bin via D-link web interface (Management/Upgrade). Revert to stock Upload original firmware via OpenWrt sysupgrade interface. Debricking D-Link Recovery GUI (192.168.0.1) Signed-off-by: Jan Forman --- diff --git a/target/linux/ath79/dts/qca9563_dlink_dir-869-a1.dts b/target/linux/ath79/dts/qca9563_dlink_dir-869-a1.dts new file mode 100644 index 000000000000..eab713ea66aa --- /dev/null +++ b/target/linux/ath79/dts/qca9563_dlink_dir-869-a1.dts @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca9563_dlink_dir-8x9-a1.dtsi" +#include + +/ { + model = "D-Link DIR-869 A1"; + compatible = "dlink,dir-869-a1", "qca,qca9563"; + + aliases { + led-boot = &led_power_orange; + led-failsafe = &led_power_orange; + led-running = &led_power_white; + led-upgrade = &led_power_orange; + }; + + leds { + compatible = "gpio-leds"; + + led_power_orange: power_orange { + label = "orange:power"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + + led_power_white: power_white { + label = "white:power"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + }; + }; +}; + diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 1d89f0b86c5e..487467cd598d 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -291,6 +291,7 @@ ath79_setup_interfaces() dlink,dir-842-c2|\ dlink,dir-842-c3|\ dlink,dir-859-a1|\ + dlink,dir-869-a1|\ engenius,epg5000|\ engenius,esr1200|\ engenius,esr1750|\ @@ -656,6 +657,10 @@ ath79_setup_macs() label_mac=$lan_mac ;; dlink,dir-859-a1|\ + dlink,dir-869-a1) + lan_mac=$(mtd_get_mac_text "devdata" 0xc9) + wan_mac=$(mtd_get_mac_text "devdata" 0x79) + ;; qihoo,c301|\ wd,mynet-n600|\ wd,mynet-n750) diff --git a/target/linux/ath79/generic/base-files/etc/uci-defaults/09_fix-checksum b/target/linux/ath79/generic/base-files/etc/uci-defaults/09_fix-checksum index 4d961f26d298..7f4d6cf428ca 100644 --- a/target/linux/ath79/generic/base-files/etc/uci-defaults/09_fix-checksum +++ b/target/linux/ath79/generic/base-files/etc/uci-defaults/09_fix-checksum @@ -22,6 +22,7 @@ dlink,dap-3662-a1) fixwrgg ;; dlink,dir-629-a1|\ +dlink,dir-869-a1|\ qihoo,c301) fix_seama_header ;; diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index fc9ffa6de966..d4a419501c0a 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -1150,11 +1150,24 @@ define Device/dlink_dir-859-a1 DEVICE_MODEL := DIR-859 DEVICE_VARIANT := A1 IMAGE_SIZE := 15872k - DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct + DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct SEAMA_SIGNATURE := wrgac37_dlink.2013gui_dir859 endef TARGET_DEVICES += dlink_dir-859-a1 +define Device/dlink_dir-869-a1 + $(Device/seama) + SOC := qca9563 + DEVICE_VENDOR := D-Link + DEVICE_MODEL := DIR-869 + DEVICE_VARIANT := A1 + IMAGE_SIZE := 15872k + DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct + SEAMA_SIGNATURE := wrgac54_dlink.2015_dir869 + SUPPORTED_DEVICES += dir-869-a1 +endef +TARGET_DEVICES += dlink_dir-869-a1 + define Device/elecom_wrc-1750ghbk2-i SOC := qca9563 DEVICE_VENDOR := ELECOM