From: Felix Fietkau Date: Sat, 4 Nov 2006 00:21:54 +0000 (+0000) Subject: move comgt to trunk and add network scripts for umts compatible with the wrt54g3g X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=8cc785bdf6493ae87bc9f9cf67f35a6dea36af49;p=openwrt%2Fstaging%2F981213.git move comgt to trunk and add network scripts for umts compatible with the wrt54g3g SVN-Revision: 5433 --- diff --git a/package/comgt/Makefile b/package/comgt/Makefile new file mode 100644 index 0000000000..82a2e2fe39 --- /dev/null +++ b/package/comgt/Makefile @@ -0,0 +1,65 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +# $Id$ + +include $(TOPDIR)/rules.mk + +PKG_NAME:=comgt +PKG_VERSION:=0.3 +PKG_RELEASE:=1 + +PKG_SOURCE:=$(PKG_NAME)$(PKG_VERSION).tgz +PKG_SOURCE_URL:=http://www.pharscape.org/3G/comgt +PKG_MD5SUM:=cd32663025ed94a0ee623a689989f3c3 + +PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION) +PKG_UNPACK:=mkdir -p $(PKG_BUILD_DIR); zcat $(DL_DIR)/$(PKG_SOURCE) | $(TAR) -C $(PKG_BUILD_DIR) $(TAR_OPTIONS) + +include $(INCLUDE_DIR)/package.mk + + +define Package/comgt + SECTION:=utils + CATEGORY:=Utilities + TITLE:=Option/Vodafone 3G/GPRS control tool + DEPENDS:=+chat + DESCRIPTION:=\ + comgt is a scripting language interpreter useful for establishing communications \\\ + on serial lines and through PCMCIA modems as well as GPRS and 3G datacards. + URL:= http://www.pharscape.org/content/view/46/70/ +endef + + +define Build/Compile + $(MAKE) -C $(PKG_BUILD_DIR) \ + $(TARGET_CONFIGURE_OPTS) \ + CFLAGS="$(TARGET_CFLAGS)" \ + gcom +endef + +define Package/comgt/install + install -d -m0755 $(1)/usr/bin + install -m0755 $(PKG_BUILD_DIR)/gcom $(1)/usr/bin/ + install -d -m0755 $(1)/etc/ppp + install -m0755 ./files/3g.connect $(1)/etc/ppp/3g.connect + install -d -m0755 $(1)/etc/chatscripts + install -m0644 ./files/3g.chat $(1)/etc/chatscripts/3g.chat + install -d -m0755 $(1)/lib/network + install -m0644 ./files/3g.sh $(1)/lib/network/3g.sh + install -d -m0755 $(1)/etc/hotplug.d/button + install -m0644 ./files/3g.button $(1)/etc/hotplug.d/button/05-3g + install -d -m0755 $(1)/etc/hotplug.d/iface + install -m0644 ./files/3g.iface $(1)/etc/hotplug.d/iface/05-3g + install -d -m0755 $(1)/etc/gcom + install -m0644 ./files/setpin.gcom $(1)/etc/gcom/setpin.gcom + install -m0644 ./files/setmode.gcom $(1)/etc/gcom/setmode.gcom + install -m0644 ./files/getcardinfo.gcom $(1)/etc/gcom/getcardinfo.gcom + install -m0644 ./files/getstrength.gcom $(1)/etc/gcom/getstrength.gcom +endef + +$(eval $(call BuildPackage,comgt)) + diff --git a/package/comgt/files/3g.button b/package/comgt/files/3g.button new file mode 100644 index 0000000000..54997d870a --- /dev/null +++ b/package/comgt/files/3g.button @@ -0,0 +1,35 @@ +button_action() {( + # use led for keeping track of the state + case "$(cat /proc/diag/led/3g_green)" in + 1) + ifdown "$1" + ifup wan + ;; + 0) + ifdown wan + ifup "$1" + ;; + esac +)} + +[ "$ACTION" = "released" -a "$BUTTON" = "3g" ] && { + (echo /bin/true > /proc/sys/kernel/hotplug) + + include /lib/network + scan_interfaces + config_cb() { + config_get TYPE "$CONFIG_SECTION" TYPE + case "$TYPE" in + interface) + config_get proto "$CONFIG_SECTION" proto + config_get button "$CONFIG_SECTION" button + case "$button" in + 1|on|enabled) [ "$proto" = "3g" ] && button_action "$CONFIG_SECTION";; + esac + ;; + esac + } + config_load network + + (echo /sbin/hotplug > /proc/sys/kernel/hotplug) +} & diff --git a/package/comgt/files/3g.chat b/package/comgt/files/3g.chat new file mode 100644 index 0000000000..a1fa2a02d6 --- /dev/null +++ b/package/comgt/files/3g.chat @@ -0,0 +1,12 @@ +ABORT BUSY +ABORT 'NO CARRIER' +ABORT ERROR +REPORT CONNECT +TIMEOUT 10 +"" "AT&F" +OK "ATE1" +OK 'AT+CGDCONT=1,"IP","$USE_APN"' +SAY "Calling UMTS/GPRS" +TIMEOUT 30 +OK "ATD*99***1#" +CONNECT ' ' diff --git a/package/comgt/files/3g.connect b/package/comgt/files/3g.connect new file mode 100644 index 0000000000..04f45f9de6 --- /dev/null +++ b/package/comgt/files/3g.connect @@ -0,0 +1,4 @@ +#!/bin/sh +. /lib/network/3g.sh +set_3g_led 1 1 1 +/usr/sbin/chat -V -E -f /etc/chatscripts/3g.chat diff --git a/package/comgt/files/3g.iface b/package/comgt/files/3g.iface new file mode 100644 index 0000000000..a8476ca8df --- /dev/null +++ b/package/comgt/files/3g.iface @@ -0,0 +1,10 @@ +include /lib/network +config_load network +scan_interfaces +config_get proto "$INTERFACE" proto +[ "$proto" = "3g" ] && { + case "$ACTION" in + ifup) set_3g_led 1 1 0;; + ifdown) set_3g_led 0 0 0;; + esac +} diff --git a/package/comgt/files/3g.sh b/package/comgt/files/3g.sh new file mode 100644 index 0000000000..125bec3d69 --- /dev/null +++ b/package/comgt/files/3g.sh @@ -0,0 +1,89 @@ +set_3g_led() { + grep WRT54G3G /proc/diag/model >/dev/null || return 0 + echo "$1" > /proc/diag/led/3g_green + echo "$2" > /proc/diag/led/3g_blue + echo "$3" > /proc/diag/led/3g_blink +} + +scan_3g() { + local device + + scan_ppp "$@" + config_get device "$1" device + + # try to figure out the device if it's invalid + [ -n "$device" -a -e "$device" ] || { + for device in /dev/tts/2 /dev/usb/tts/0 /dev/noz0; do + [ -e "$device" ] && { + config_set "$1" device "$device" + break + } + done + } + + # enable 3G with the 3G button by default + config_get button "$1" button + [ -z "$button" ] && { + config_set "$1" button 1 + } +} + +stop_interface_3g() { + set_3g_led 0 0 0 + killall gcom >/dev/null 2>/dev/null +} + +setup_interface_3g() { + local iface="$1" + local config="$2" + + config_get device "$config" device + + for module in slhc ppp_generic ppp_async; do + /sbin/insmod $module 2>&- >&- + done + + config_get apn "$cfg" apn + config_get service "$cfg" service + config_get pincode "$cfg" pincode + config_get mtu "$cfg" mtu + + set_3g_led 1 0 1 + + # figure out hardware specific commands for the card + if gcom -d "$device" -s /etc/gcom/getcardinfo.gcom | grep Novatel 2>/dev/null >/dev/null; then + case "$service" in + umts_only) CODE=2;; + gprs_only) CODE=1;; + *) CODE=0;; + esac + mode="AT\$NWRAT=${CODE},2" + else + case "$service" in + umts_only) CODE=1;; + gprs_only) CODE=0;; + *) CODE=3;; + esac + mode="AT_OPSYS=${CODE}" + fi + + PINCODE="$pincode" gcom -d "$device" -s /etc/gcom/setpin.gcom || { + echo "$cfg(3g): Failed to set the PIN code." + set_3g_led 0 0 0 + return 1 + } + MODE="$mode" gcom -d "$device" -s /etc/gcom/setmode.gcom + set_3g_led 1 0 0 + + start_pppd "$config" \ + noaccomp \ + nopcomp \ + novj \ + nobsdcomp \ + noauth \ + lock \ + crtscts \ + connect "USE_APN=\"$apn\" /etc/ppp/3g.connect" \ + ${mtu:+mtu $mtu mru $mtu} \ + 460800 "$device" +} diff --git a/package/comgt/files/getcardinfo.gcom b/package/comgt/files/getcardinfo.gcom new file mode 100644 index 0000000000..5c69a64604 --- /dev/null +++ b/package/comgt/files/getcardinfo.gcom @@ -0,0 +1,14 @@ +opengt + set com 115200n81 + set comecho off + set senddelay 0.02 + waitquiet 0.2 0.2 + flash 0.1 + +:start + send "ATI^m" + get 1 "" $s + print $s + +:continue + exit 0 diff --git a/package/comgt/files/getstrength.gcom b/package/comgt/files/getstrength.gcom new file mode 100644 index 0000000000..2886285971 --- /dev/null +++ b/package/comgt/files/getstrength.gcom @@ -0,0 +1,14 @@ +opengt + set com 115200n81 + set comecho off + set senddelay 0.02 + waitquiet 0.2 0.2 + flash 0.1 + +:start + send "AT+CSQ^m" + get 1 "" $s + print $s + +:continue + exit 0 diff --git a/package/comgt/files/setmode.gcom b/package/comgt/files/setmode.gcom new file mode 100644 index 0000000000..4ce0b5fa78 --- /dev/null +++ b/package/comgt/files/setmode.gcom @@ -0,0 +1,26 @@ +# set wwan mode from environment +opengt + set com 115200n81 + set senddelay 0.02 + waitquiet 1 0.2 + flash 0.1 + +:start + print "Trying to set mode\n" + send $env("MODE") + send "^m" + + waitfor 15 "OK","ERR","ERROR" + if % = 0 goto continue + if % = 1 goto modeerror + if % = 2 goto modeerror + + print "Timeout setting WWAN mode!\n" + exit 1 + +:modeerror + print "Error setting WWAN mode!\n" + exit 1 + +:continue + exit 0 diff --git a/package/comgt/files/setpin.gcom b/package/comgt/files/setpin.gcom new file mode 100644 index 0000000000..66350fe20b --- /dev/null +++ b/package/comgt/files/setpin.gcom @@ -0,0 +1,55 @@ +# set pin code from evnironment "$PINCODE" +opengt + set com 115200n81 + set senddelay 0.05 + waitquiet 3 0.5 + flash 0.1 + + let c=0 +:start + send "AT+CPIN?^m" + waitfor 15 "SIM PUK","SIM PIN","READY","ERROR","ERR" + if % = -1 goto timeout + if % = 0 goto ready + if % = 1 goto setpin + if % = 2 goto ready + if % = 3 goto checkrepeat + if % = 4 goto checkrepeat + +:checkrepeat + inc c + if c>3 goto pinerror + waitquiet 12 0.5 + goto start + +:timeout + print "timeout checking for PIN." + exit 1 + +:ready + print "SIM ready\n" + goto continue + exit 0 + +:setpin + # check if output was "SIM PIN2", that's ok. + waitfor 1 "2" + if % = 0 goto ready + + print "Trying to set PIN\n" + send "AT+CPIN=\"" + send $env("PINCODE") + send "\"^m" + + waitfor 20 "OK","ERR" + if % = -1 goto pinerror + if % = 0 goto continue + if % = 1 goto pinerror + +:pinerror + print "Error setting PIN, check card manually\n" + exit 1 + +:continue + print "PIN set successfully\n" + exit 0 diff --git a/package/comgt/patches/001-Makefile.patch b/package/comgt/patches/001-Makefile.patch new file mode 100644 index 0000000000..28ea2ecf27 --- /dev/null +++ b/package/comgt/patches/001-Makefile.patch @@ -0,0 +1,32 @@ +--- gcom-0.3.x/Makefile 2006-01-04 17:05:28.000000000 +0200 ++++ gcom-0.3/Makefile 2006-02-26 13:02:07.000000000 +0200 +@@ -20,8 +20,6 @@ + # + # $Id$ + # +-LIB = -L/usr/local/lib +-INC = -I/usr/local/include + EXE = /usr/local/bin + MAN = /usr/share/man/man1 + CPROG = gcom +@@ -29,9 +27,6 @@ + BIN = $(CPROG) $(SCRIPT) + MANP = gcom.1 sigmon.1 + +-CFLAGS = -c +-LDFLAGS = +- + all: $(BIN) + + install: +@@ -53,8 +48,8 @@ + + + gcom: gcom.o +- cc gcom.o $(LDFLAGS) -o gcom ++ $(CC) gcom.o $(LDFLAGS) -o gcom + + gcom.o: gcom.c gcom.h +- cc gcom.c $(CFLAGS) ++ $(CC) -c $(CFLAGS) gcom.c +