From: Henryk Heisig Date: Sun, 30 Oct 2016 16:57:27 +0000 (+0100) Subject: ar71xx: Add support to Powerline ac TP-Link WPA8630 X-Git-Tag: v17.01.0-rc1~981 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=8cc0c34ef550ac2f842fe6811d32ac01af69d19f;p=openwrt%2Fstaging%2Fchunkeey.git ar71xx: Add support to Powerline ac TP-Link WPA8630 Signed-off-by: Henryk Heisig --- diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index a32ca9101e..01308b5f57 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -638,6 +638,11 @@ wnr612-v2) ucidef_set_led_switch "lan1" "LAN1" "netgear:green:lan1" "switch0" "0x02" "0x0f" ucidef_set_led_switch "lan2" "LAN2" "netgear:green:lan2" "switch0" "0x04" "0x0f" ;; +wpa8630) + ucidef_set_led_netdev "wlan5" "WLAN5" "$board:green:wlan5" "wlan0" + ucidef_set_led_netdev "wlan" "WLAN" "$board:green:wlan" "wlan1" + ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0" + ;; wpn824n) ucidef_set_led_netdev "wan-amber" "WAN (amber)" "netgear:amber:wan" "eth0" ucidef_set_led_wlan "wlan" "WLAN" "netgear:blue:wlan" "phy0tpt" diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index ab7404d4f3..e6489af876 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -398,6 +398,10 @@ ar71xx_setup_interfaces() ucidef_add_switch_port_attr "switch0" 2 led 9 ucidef_add_switch_port_attr "switch0" 5 led 2 ;; + wpa8630) + ucidef_add_switch "switch0" \ + "0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "5:lan:4" + ;; wpj344) ucidef_add_switch "switch0" \ "0@eth0" "3:lan" "2:wan" diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 475cb80397..8b038e47ee 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -43,7 +43,8 @@ get_status_led() { ap83|\ mr12|\ mr16|\ - nbg6616) + nbg6616|\ + wpa8630) status_led="$board:green:power" ;; ap96) diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 5a48b06a36..c95cfb9ec4 100644 --- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -90,6 +90,10 @@ case "$FIRMWARE" in unifiac-pro) ath10kcal_extract "EEPROM" 20480 2116 ;; + wpa8630) + ath10kcal_extract "ART" 20480 2116 + ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1) + ;; esac ;; "ath10k/cal-pci-0000:01:00.0.bin") diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index f51d7db9c1..d7c4131f7b 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -1129,6 +1129,9 @@ ar71xx_board_detect() { *"WNR1000 V2") name="wnr1000-v2" ;; + *WPA8630) + name="wpa8630" + ;; *WPN824N) name="wpn824n" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 9c0f3f3bc5..3c7976d6bf 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -386,7 +386,8 @@ platform_check_image() { tl-wr842n-v3|\ tl-wr941nd-v5|\ tl-wr941nd-v6|\ - tl-wr941nd) + tl-wr941nd|\ + wpa8630) local magic_ver="0100" case "$board" in diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4 index 4e3f5a4beb..64c3604371 100644 --- a/target/linux/ar71xx/config-4.4 +++ b/target/linux/ar71xx/config-4.4 @@ -194,6 +194,7 @@ CONFIG_ATH79_MACH_WNR2000_V3=y CONFIG_ATH79_MACH_WNR2000_V4=y CONFIG_ATH79_MACH_WNR2200=y CONFIG_ATH79_MACH_WP543=y +CONFIG_ATH79_MACH_WPA8630=y CONFIG_ATH79_MACH_WPE72=y CONFIG_ATH79_MACH_WPJ342=y CONFIG_ATH79_MACH_WPJ344=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index 86df292dd8..60f6d9a978 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -1707,3 +1707,14 @@ config ATH79_MACH_DAP_2695_A1 select ATH79_DEV_LEDS_GPIO select ATH79_DEV_M25P80 select ATH79_DEV_WMAC + +config ATH79_MACH_WPA8630 + bool "TP-Link WPA8630 support" + select SOC_QCA956X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index 4b927bcc3b..cbfd7a4506 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -200,6 +200,7 @@ obj-$(CONFIG_ATH79_MACH_WNR2000_V3) += mach-wnr2000-v3.o obj-$(CONFIG_ATH79_MACH_WNR2000_V4) += mach-wnr2000-v4.o obj-$(CONFIG_ATH79_MACH_WNR2200) += mach-wnr2200.o obj-$(CONFIG_ATH79_MACH_WP543) += mach-wp543.o +obj-$(CONFIG_ATH79_MACH_WPA8630) += mach-wpa8630.o obj-$(CONFIG_ATH79_MACH_WPE72) += mach-wpe72.o obj-$(CONFIG_ATH79_MACH_WPJ342) += mach-wpj342.o obj-$(CONFIG_ATH79_MACH_WPJ344) += mach-wpj344.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wpa8630.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wpa8630.c new file mode 100644 index 0000000000..d86adaf27b --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wpa8630.c @@ -0,0 +1,164 @@ +/* + * TP-Link WPA8630 board support + * + * Copyright (C) 2016 Henryk Heisig + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ +#include +#include +#include +#include + +#include "common.h" +#include "dev-m25p80.h" +#include "machtypes.h" +#include "pci.h" +#include "dev-ap9x-pci.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-spi.h" +#include "dev-wmac.h" + +#define WPA8630_KEYS_POLL_INTERVAL 20 +#define WPA8630_KEYS_DEBOUNCE_INTERVAL (3 * WPA8630_KEYS_POLL_INTERVAL) + +#define WPA8630_GPIO_LED_POWER 1 +#define WPA8630_GPIO_LED_LAN 5 +#define WPA8630_GPIO_LED_WLAN 19 +#define WPA8630_GPIO_LED_WLAN5 21 + +#define WPA8630_GPIO_BTN_RESET 2 +#define WPA8630_GPIO_BTN_RFKILL 8 +#define WPA8630_GPIO_BTN_0 6 +#define WPA8630_GPIO_BTN_1 7 + +#define WPA8630_MAC0_OFFSET 0x0000 +#define WPA8630_WMAC_CALDATA_OFFSET 0x1000 +#define WPA8630_PCI_CALDATA_OFFSET 0x5000 + +static struct flash_platform_data wpa8630_flash_data = { + .type = "s25fl064k", +}; + +static struct gpio_led wpa8630_leds_gpio[] __initdata = { + { + .name = "wpa8630:green:power", + .gpio = WPA8630_GPIO_LED_POWER, + .active_low = 1, + }, + { + .name = "wpa8630:green:lan", + .gpio = WPA8630_GPIO_LED_LAN, + .active_low = 1, + }, + { + .name = "wpa8630:green:wlan", + .gpio = WPA8630_GPIO_LED_WLAN, + .active_low = 1, + }, + { + .name = "wpa8630:green:wlan5", + .gpio = WPA8630_GPIO_LED_WLAN5, + .active_low = 1, + }, +}; + +static struct gpio_keys_button wpa8630_gpio_keys[] __initdata = { + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WPA8630_KEYS_DEBOUNCE_INTERVAL, + .gpio = WPA8630_GPIO_BTN_RESET, + .active_low = 1, + }, + { + .desc = "RFKILL button", + .type = EV_KEY, + .code = KEY_RFKILL, + .debounce_interval = WPA8630_KEYS_DEBOUNCE_INTERVAL, + .gpio = WPA8630_GPIO_BTN_RFKILL, + .active_low = 1, + }, + { + .desc = "LED", + .type = EV_KEY, + .debounce_interval = WPA8630_KEYS_DEBOUNCE_INTERVAL, + .gpio = WPA8630_GPIO_BTN_0, + .active_low = 1, + }, + { + .desc = "Pair", + .type = EV_KEY, + .debounce_interval = WPA8630_KEYS_DEBOUNCE_INTERVAL, + .gpio = WPA8630_GPIO_BTN_1, + .active_low = 1, + }, +}; + +/* GMAC0 of the QCA8337 switch is connected to the QCA9563 SoC via SGMII */ +static struct ar8327_pad_cfg wpa8630_qca8337_pad0_cfg = { + .mode = AR8327_PAD_MAC_SGMII, + .sgmii_delay_en = true, +}; + +static struct ar8327_platform_data wpa8630_qca8337_data = { + .pad0_cfg = &wpa8630_qca8337_pad0_cfg, + .port0_cfg = { + .force_link = 1, + .speed = AR8327_PORT_SPEED_1000, + .duplex = 1, + .txpause = 1, + .rxpause = 1, + }, +}; + +static struct mdio_board_info wpa8630_mdio0_info[] = { + { + .bus_id = "ag71xx-mdio.0", + .phy_addr = 0, + .platform_data = &wpa8630_qca8337_data, + }, +}; + +static void __init wpa8630_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f00fc00); + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + + ath79_register_m25p80(&wpa8630_flash_data); + + ath79_init_mac(ath79_eth0_data.mac_addr, + art + WPA8630_MAC0_OFFSET, 0); + + platform_device_register(&ath79_mdio0_device); + + mdiobus_register_board_info(wpa8630_mdio0_info, + ARRAY_SIZE(wpa8630_mdio0_info)); + + /* GMAC0 is connected to an AR8337 switch */ + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; + ath79_eth0_data.phy_mask = ~BIT(4); + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); + + ath79_register_eth(0); + + ath79_register_wmac(art + WPA8630_WMAC_CALDATA_OFFSET, mac); + + ap91_pci_init(art + WPA8630_PCI_CALDATA_OFFSET, NULL); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(wpa8630_leds_gpio), + wpa8630_leds_gpio); + + ath79_register_gpio_keys_polled(-1, WPA8630_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wpa8630_gpio_keys), + wpa8630_gpio_keys); +} + +MIPS_MACHINE(ATH79_MACH_WPA8630, "WPA8630", "TP-Link WPA8630", + wpa8630_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index 1243409159..d252a2bc44 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -258,6 +258,7 @@ enum ath79_mach_type { ATH79_MACH_WNR2200, /* NETGEAR WNR2200 */ ATH79_MACH_WNR612_V2, /* NETGEAR WNR612 v2 */ ATH79_MACH_WP543, /* Compex WP543 */ + ATH79_MACH_WPA8630, /* TP-Link WPA8630 */ ATH79_MACH_WPE72, /* Compex WPE72 */ ATH79_MACH_WPJ342, /* Compex WPJ342 */ ATH79_MACH_WPJ344, /* Compex WPJ344 */ diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk index 58ea1f3556..b494411db7 100644 --- a/target/linux/ar71xx/image/tp-link.mk +++ b/target/linux/ar71xx/image/tp-link.mk @@ -913,3 +913,15 @@ define Device/tl-wa7210n-v2 CONSOLE := ttyATH0,115200 endef TARGET_DEVICES += tl-wa7210n-v2 + +define Device/wpa8630 + $(Device/tplink-8mlzma) + DEVICE_TITLE := TP-LINK WPA8630 + DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x + BOARDNAME := WPA8630 + DEVICE_PROFILE := WPA8630 + TPLINK_HWID := 0x86300001 + MTDPARTS = spi0.0:64k(u-boot)ro,1280k(kernel),6720k(rootfs),64k(mib0)ro,64k(ART)ro,8000k@0x10000(firmware) + IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade -a 0x10000 +endef +TARGET_DEVICES += wpa8630