From: John Crispin Date: Sat, 17 Jan 2015 07:07:21 +0000 (+0000) Subject: Remove old P2812HNUFX dts X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=8cbf97e936f8e7956138e5078361a35594c99e43;p=openwrt%2Fstaging%2Fluka.git Remove old P2812HNUFX dts Remove unused P2812HNUFX board definition. Signed-off-by: Sylwester Petela SVN-Revision: 43988 --- diff --git a/target/linux/lantiq/dts/P2812HNUFX.dts b/target/linux/lantiq/dts/P2812HNUFX.dts deleted file mode 100644 index 5af10d49f3..0000000000 --- a/target/linux/lantiq/dts/P2812HNUFX.dts +++ /dev/null @@ -1,308 +0,0 @@ -/dts-v1/; - -/include/ "vr9.dtsi" - -/ { - model = "P2812HNUFX - ZyXEL P-2812HNU-Fx"; - - chosen { - /*bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";*/ - }; - - memory@0 { - reg = <0x0 0x8000000>; - }; - - fpi@10000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "lantiq,fpi", "simple-bus"; - ranges = <0x0 0x10000000 0xEEFFFFF>; - reg = <0x10000000 0xEF00000>; - - localbus@0 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "lantiq,localbus", "simple-bus"; - - nand-parts@0 { - compatible = "gen_nand", "lantiq,nand-xway"; - lantiq,cs = <1>; - bank-width = <2>; - reg = <0 0x0 0x2000000>; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x00000 0x40000>; - }; - - partition@40000 { - label = "u-boot environment"; - reg = <0x40000 0x20000>; - }; - - partition@60000 { - label = "root"; - reg = <0x60000 0x7fa0000>; - }; - }; - }; - - gpio: pinmux@E100B10 { - compatible = "lantiq,pinctrl-xr9"; - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - interrupt-parent = <&icu0>; - interrupts = <166 135 66 40 41 42 38>; - - #gpio-cells = <2>; - gpio-controller; - reg = <0xE100B10 0xA0>; - - state_default: pinmux { - mdio { - lantiq,groups = "mdio"; - lantiq,function = "mdio"; - }; - gphy-leds { - lantiq,groups = "gphy0 led1", "gphy1 led1", - "gphy0 led2", "gphy1 led2"; - lantiq,function = "gphy"; - lantiq,pull = <2>; - lantiq,open-drain = <0>; - lantiq,output = <1>; - }; - stp { - lantiq,groups = "stp"; - lantiq,function = "stp"; - lantiq,pull = <2>; - lantiq,open-drain = <0>; - lantiq,output = <1>; - }; - pci { - lantiq,groups = "gnt1", "req1"; - lantiq,function = "pci"; - }; - pci-rst { - lantiq,pins = "io21"; - lantiq,pull = <0>; - lantiq,open-drain = <0>; - lantiq,output = <1>; - }; - ifxhcd-rst { - lantiq,pins = "io33"; - lantiq,pull = <0>; - lantiq,open-drain = <0>; - lantiq,output = <1>; - }; - nand { - lantiq,groups = "nand cle", "nand ale", - "nand rd", "nand cs1", "nand rdy"; - lantiq,function = "ebu"; - lantiq,pull = <1>; - }; - }; - }; - - eth@E108000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-net"; - reg = < 0xE108000 0x3000 /* switch */ - 0xE10B100 0x70 /* mdio */ - 0xE10B1D8 0x30 /* mii */ - 0xE10B308 0x30 /* pmac */ - >; - interrupt-parent = <&icu0>; - interrupts = <73 72>; - - lan: interface@0 { - compatible = "lantiq,xrx200-pdi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - mac-address = [ 00 11 22 33 44 55 ]; - lantiq,switch; - - ethernet@0 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <0>; - phy-mode = "rgmii"; - phy-handle = <&phy0>; - }; - ethernet@1 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <1>; - phy-mode = "rgmii"; - phy-handle = <&phy1>; - }; - ethernet@2 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <2>; - phy-mode = "gmii"; - phy-handle = <&phy11>; - }; - ethernet@4 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <4>; - phy-mode = "gmii"; - phy-handle = <&phy13>; - }; - ethernet@5 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <5>; - phy-mode = "rgmii"; - phy-handle = <&phy5>; - }; - }; - - mdio@0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-mdio"; - phy0: ethernet-phy@0 { - reg = <0x0>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy1: ethernet-phy@1 { - reg = <0x1>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy5: ethernet-phy@5 { - reg = <0x5>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy11: ethernet-phy@11 { - reg = <0x11>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy13: ethernet-phy@13 { - reg = <0x13>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - }; - }; - - stp: stp@E100BB0 { - compatible = "lantiq,gpio-stp-xway"; - reg = <0xE100BB0 0x40>; - #gpio-cells = <2>; - gpio-controller; - - lantiq,shadow = <0xffffff>; - lantiq,groups = <0x7>; - /* - lantiq,dsl = <0x3>; - lantiq,phy1 = <0x7>; - lantiq,phy2 = <0x7>; - */ - }; - - ifxhcd@E101000 { - status = "okay"; - gpios = <&gpio 33 0>; - lantiq,portmask = <0x3>; - }; - - pci@E105400 { - lantiq,bus-clock = <33333333>; - /* lantiq,external-clock; */ - lantiq,delay-hi = <0>; /* 0ns delay */ - lantiq,delay-lo = <0>; /* 0.0ns delay */ - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - 0x7000 0 0 1 &icu0 29 //1 // slot 14, irq 29 - >; - gpio-reset = <&gpio 21 0>; - req-mask = <0x1>; /* GNT1 */ - status = "okay"; - }; - }; - - gphy-xrx200 { - compatible = "lantiq,phy-xrx200"; - firmware = "lantiq/vr9_phy11g_a1x.bin"; - phys = [ 00 01 ]; - }; - - gpio-keys-polled { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <100>; - reset { - label = "reset"; - gpios = <&gpio 39 1>; - linux,code = <0x198>; - }; - rfkill { - label = "rfkill"; - gpios = <&gpio 1 1>; - linux,code = <0xf7>; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - - internet2 { - label = "internet2"; - gpios = <&stp 16 1>; - }; - internet { - label = "internet"; - gpios = <&stp 17 1>; - }; - dsl { - label = "dsl"; - gpios = <&stp 18 1>; - }; - dsl2 { - label = "dsl2"; - gpios = <&stp 19 1>; - }; - wifi2 { - label = "wifi2"; - gpios = <&stp 20 1>; - }; - wlan { - label = "wifi"; - gpios = <&stp 21 1>; - }; - power2 { - label = "power2"; - gpios = <&stp 22 1>; - }; - power { - label = "power"; - gpios = <&stp 23 1>; - }; - usb1 { - label = "usb"; - gpios = <&gpio 38 1>; - }; - usb2 { - label = "usb2"; - gpios = <&gpio 44 1>; - }; - phone1 { - label = "phone1"; - gpios = <&gpio 11 1>; - }; - phone1warn { - label = "phone1warn"; - gpios = <&gpio 12 1>; - }; - phone2 { - label = "phone2"; - gpios = <&gpio 28 1>; - }; - phone2warn { - label = "phone2warn"; - gpios = <&gpio 26 1>; - }; - }; -};