From: Thibaut VARENE Date: Tue, 7 Feb 2017 18:10:04 +0000 (+0100) Subject: ar71xx: add support for RB951Ui-2nD X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=8cbb2ac6332ba3be707ea6e4129c22b9320b72c1;p=openwrt%2Fstaging%2Fyousong.git ar71xx: add support for RB951Ui-2nD This patch adds support for the MikroTik RouterBOARD hAP https://routerboard.com/RB951Ui-2nD Specifications: - SoC: Qualcomm QCA9531 (650MHz) - RAM: 64MB - Storage: 16MB NOR SPI flash - Wireless: builtin QCA9531, 2x2:2 - Ethernet: 5x100M (1 PoE in, 1 PoE out) - USB: Type A Signed-off-by: Thibaut VARENE --- diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index 1d692fff3a..403715c002 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -225,6 +225,15 @@ rb-750) rb-941-2nd) ucidef_set_led_timer "user" "USR/ACT" "rb:green:user" "1000" "1000" ;; +rb-951ui-2nd) + ucidef_set_led_timer "user" "USER" "rb:green:user" "1000" "1000" + ucidef_set_led_netdev "port1" "port1" "rb:green:port1" "eth0" + ucidef_set_led_switch "port2" "port2" "rb:green:port2" "switch0" "0x10" + ucidef_set_led_switch "port3" "port2" "rb:green:port3" "switch0" "0x08" + ucidef_set_led_switch "port4" "port3" "rb:green:port4" "switch0" "0x04" + ucidef_set_led_switch "port5" "port5" "rb:green:port5" "switch0" "0x02" + ucidef_set_led_wlan "wlan" "WLAN" "rb:blue:wlan" "phy0tpt" + ;; rb-2011l|\ rb-2011uas|\ rb-2011uias|\ diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index f3dcd907e3..721c01c6a4 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -137,6 +137,7 @@ ar71xx_setup_interfaces() pb42|\ pb44|\ rb-951ui-2hnd|\ + rb-951ui-2nd|\ routerstation|\ tl-wr710n|\ tl-wr720n-v3|\ diff --git a/target/linux/ar71xx/base-files/etc/board.d/03_gpio_switches b/target/linux/ar71xx/base-files/etc/board.d/03_gpio_switches index 66be8e76d5..e76c9be68a 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/03_gpio_switches +++ b/target/linux/ar71xx/base-files/etc/board.d/03_gpio_switches @@ -27,6 +27,10 @@ rb-912uag-2hpnd|\ rb-912uag-5hpnd) ucidef_add_gpio_switch "usb_power_switch" "USB Power Switch" "52" "1" ;; +rb-951ui-2nd) + ucidef_add_gpio_switch "usb_power_switch" "USB Power Switch" "45" "1" + ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "14" + ;; esac board_config_flush diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 527e8b749e..5f52389c8b 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -299,6 +299,7 @@ get_status_led() { rb-912uag-2hpnd|\ rb-912uag-5hpnd|\ rb-941-2nd|\ + rb-951ui-2nd|\ rb-mapl-2nd) status_led="rb:green:user" ;; diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 066f8eb17f..a79839864c 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -868,6 +868,9 @@ ar71xx_board_detect() { *"RouterBOARD 951Ui-2HnD") name="rb-951ui-2hnd" ;; + *"951Ui-2nD") + name="rb-951ui-2nd" + ;; *"RouterBOARD 2011L") name="rb-2011l" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 43515fe93a..b18e87eec7 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -344,6 +344,7 @@ platform_check_image() { pb42|\ pb44|\ rb-941-2nd|\ + rb-951ui-2nd|\ rb-mapl-2nd|\ routerstation-pro|\ routerstation|\ @@ -617,6 +618,7 @@ platform_pre_upgrade() { case "$board" in rb-941-2nd|\ + rb-951ui-2nd|\ rb-mapl-2nd) ;; rb*|\ @@ -654,6 +656,7 @@ platform_do_upgrade() { case "$board" in rb-941-2nd|\ + rb-951ui-2nd|\ rb-mapl-2nd) PLATFORM_DO_UPGRADE_COMBINED_SEPARATE_MTD=1 platform_do_upgrade_combined "$ARGV" diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index 9bca451002..ef22aea348 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -921,12 +921,14 @@ config ATH79_MACH_RBSPI select ATH79_DEV_GPIO_BUTTONS select ATH79_DEV_LEDS_GPIO select ATH79_DEV_M25P80 + select ATH79_DEV_USB select ATH79_DEV_WMAC select ATH79_ROUTERBOOT help Say 'Y' here if you want your kernel to support the MikroTik RouterBOARD mAP lite MikroTik RouterBOARD hAP lite + MikroTik RouterBOARD hAP config ATH79_MACH_RBSXTLITE bool "MikroTik RouterBOARD SXT Lite" diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c index 541865220c..8f8a4f5a11 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c @@ -3,6 +3,7 @@ * * - MikroTik RouterBOARD mAP L-2nD * - MikroTik RouterBOARD 941L-2nD + * - MikroTik RouterBOARD 951Ui-2nD * * Copyright (C) 2017 Thibaut VARENE * @@ -16,6 +17,9 @@ #include #include +#include +#include + #include #include @@ -40,6 +44,7 @@ #define RBSPI_HAS_USB BIT(0) #define RBSPI_HAS_WLAN BIT(1) #define RBSPI_HAS_WAN4 BIT(2) /* has WAN port on PHY4 */ +#define RBSPI_HAS_SSR BIT(3) /* has an SSR on SPI bus 0 */ #define RB_ROUTERBOOT_OFFSET 0x0000 #define RB_BIOS_SIZE 0x1000 @@ -166,6 +171,96 @@ static struct gpio_led rbhapl_leds[] __initdata = { }, }; +/* common RB SSRs */ +#define RBSPI_SSR_GPIO_BASE 40 +#define RBSPI_SSR_GPIO(bit) (RBSPI_SSR_GPIO_BASE + (bit)) + +/* RB 951Ui-2nD gpios */ +#define RB952_SSR_BIT_LED_LAN1 0 +#define RB952_SSR_BIT_LED_LAN2 1 +#define RB952_SSR_BIT_LED_LAN3 2 +#define RB952_SSR_BIT_LED_LAN4 3 +#define RB952_SSR_BIT_LED_LAN5 4 +#define RB952_SSR_BIT_USB_POWER 5 +#define RB952_SSR_BIT_LED_WLAN 6 +#define RB952_GPIO_SSR_CS 11 +#define RB952_GPIO_LED_USER 4 +#define RB952_GPIO_POE_POWER 14 +#define RB952_GPIO_USB_POWER RBSPI_SSR_GPIO(RB952_SSR_BIT_USB_POWER) +#define RB952_GPIO_LED_LAN1 RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_LAN1) +#define RB952_GPIO_LED_LAN2 RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_LAN2) +#define RB952_GPIO_LED_LAN3 RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_LAN3) +#define RB952_GPIO_LED_LAN4 RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_LAN4) +#define RB952_GPIO_LED_LAN5 RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_LAN5) +#define RB952_GPIO_LED_WLAN RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_WLAN) + +static struct gpio_led rb952_leds[] __initdata = { + { + .name = "rb:green:user", + .gpio = RB952_GPIO_LED_USER, + .active_low = 0, + }, { + .name = "rb:blue:wlan", + .gpio = RB952_GPIO_LED_WLAN, + .active_low = 1, + }, { + .name = "rb:green:port1", + .gpio = RB952_GPIO_LED_LAN1, + .active_low = 1, + }, { + .name = "rb:green:port2", + .gpio = RB952_GPIO_LED_LAN2, + .active_low = 1, + }, { + .name = "rb:green:port3", + .gpio = RB952_GPIO_LED_LAN3, + .active_low = 1, + }, { + .name = "rb:green:port4", + .gpio = RB952_GPIO_LED_LAN4, + .active_low = 1, + }, { + .name = "rb:green:port5", + .gpio = RB952_GPIO_LED_LAN5, + .active_low = 1, + }, +}; + +static struct gen_74x164_chip_platform_data rbspi_ssr_data = { + .base = RBSPI_SSR_GPIO_BASE, +}; + +/* the spi-ath79 driver can only natively handle CS0. Other CS are bit-banged */ +static int rbspi_spi_cs_gpios[] = { + -ENOENT, /* CS0 is always -ENOENT: natively handled */ + -ENOENT, /* CS1 can be updated by the code as necessary */ +}; + +static struct ath79_spi_platform_data rbspi_ath79_spi_data = { + .bus_num = 0, + .cs_gpios = rbspi_spi_cs_gpios, +}; + +/* + * Global spi_board_info: devices that don't have an SSR only have the SPI NOR + * flash on bus0 CS0, while devices that have an SSR add it on the same bus CS1 + */ +static struct spi_board_info rbspi_spi_info[] = { + { + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 25000000, + .modalias = "m25p80", + .platform_data = &rbspi_spi_flash_data, + }, { + .bus_num = 0, + .chip_select = 1, + .max_speed_hz = 25000000, + .modalias = "74x164", + .platform_data = &rbspi_ssr_data, + } +}; + void __init rbspi_wlan_init(int wmac_offset) { char *art_buf; @@ -209,7 +304,16 @@ static int __init rbspi_platform_setup(void) */ static void __init rbspi_peripherals_setup(u32 flags) { - ath79_register_m25p80(&rbspi_spi_flash_data); + unsigned spi_n; + + if (flags & RBSPI_HAS_SSR) + spi_n = ARRAY_SIZE(rbspi_spi_info); + else + spi_n = 1; /* only one device on bus0 */ + + rbspi_ath79_spi_data.num_chipselect = spi_n; + rbspi_ath79_spi_data.cs_gpios = rbspi_spi_cs_gpios; + ath79_register_spi(&rbspi_ath79_spi_data, rbspi_spi_info, spi_n); if (flags & RBSPI_HAS_USB) ath79_register_usb(); @@ -314,5 +418,46 @@ static void __init rbhapl_setup(void) rbspi_gpio_keys_reset16); } +/* + * Init the hAP hardware. + * The 951Ui-2nD (hAP) has 5 ethernet ports, with ports 2-5 being assigned + * to LAN on the casing, and port 1 being assigned to "internet" (WAN). + * Port 1 is connected to PHY4 (the ports are labelled in reverse physical + * number), so the SoC can be set to connect GMAC0 to PHY4 and GMAC1 to the + * internal switch for the LAN ports. + * The device also has USB, PoE output and an SSR used for LED multiplexing. + */ +static void __init rb952_setup(void) +{ + u32 flags = RBSPI_HAS_WLAN | RBSPI_HAS_WAN4 | RBSPI_HAS_USB | + RBSPI_HAS_SSR; + + if (rbspi_platform_setup()) + return; + + rbspi_spi_cs_gpios[1] = RB952_GPIO_SSR_CS; + + rbspi_peripherals_setup(flags); + + /* GMAC1 is HW MAC + 1, WLAN MAC IS HW MAC + 5 */ + rbspi_network_setup(flags, 1, 5); + + gpio_request_one(RB952_GPIO_USB_POWER, + GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, + "USB power"); + + gpio_request_one(RB952_GPIO_POE_POWER, + GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, + "POE power"); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(rb952_leds), rb952_leds); + + /* hAP has a single reset button as gpio 16 */ + ath79_register_gpio_keys_polled(-1, RBSPI_KEYS_POLL_INTERVAL, + ARRAY_SIZE(rbspi_gpio_keys_reset16), + rbspi_gpio_keys_reset16); +} + MIPS_MACHINE_NONAME(ATH79_MACH_RB_MAPL, "map-hb", rbmapl_setup); MIPS_MACHINE_NONAME(ATH79_MACH_RB_941, "H951L", rbhapl_setup); +MIPS_MACHINE_NONAME(ATH79_MACH_RB_952, "952-hb", rb952_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index 706663ca11..2df4eda5ca 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -173,6 +173,7 @@ enum ath79_mach_type { ATH79_MACH_RB_941, /* MikroTik RouterBOARD 941-2nD */ ATH79_MACH_RB_951G, /* Mikrotik RouterBOARD 951G */ ATH79_MACH_RB_951U, /* Mikrotik RouterBOARD 951Ui-2HnD */ + ATH79_MACH_RB_952, /* MikroTik RouterBOARD 951Ui-2nD */ ATH79_MACH_RB_MAPL, /* Mikrotik RouterBOARD mAP L-2nD */ ATH79_MACH_RB_SXTLITE2ND, /* Mikrotik RouterBOARD SXT Lite 2nD */ ATH79_MACH_RB_SXTLITE5ND, /* Mikrotik RouterBOARD SXT Lite 5nD */