From: Álvaro Fernández Rojas Date: Fri, 10 May 2024 11:19:19 +0000 (+0200) Subject: bcm27xx: add 6.6 kernel patches X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=8c405cdcccadc824cfdd189550cb0fcedacd8245;p=openwrt%2Fstaging%2Fxback.git bcm27xx: add 6.6 kernel patches The patches were generated from the RPi repo with the following command: git format-patch v6.6.34..rpi-6.1.y Some patches needed rebasing and, as usual, the applied and reverted, wireless drivers, Github workflows, READMEs and defconfigs patches were removed. Signed-off-by: Álvaro Fernández Rojas --- diff --git a/target/linux/bcm27xx/patches-6.6/950-0003-raspberrypi-firmware-Update-mailbox-commands.patch b/target/linux/bcm27xx/patches-6.6/950-0003-raspberrypi-firmware-Update-mailbox-commands.patch new file mode 100644 index 0000000000..968720054c --- /dev/null +++ b/target/linux/bcm27xx/patches-6.6/950-0003-raspberrypi-firmware-Update-mailbox-commands.patch @@ -0,0 +1,102 @@ +From e2726f05782135e15537575e95faea46c40a88a2 Mon Sep 17 00:00:00 2001 +From: Dom Cobley +Date: Thu, 7 Apr 2022 18:23:07 +0100 +Subject: [PATCH 0003/1085] raspberrypi-firmware: Update mailbox commands + +Signed-off-by: Dom Cobley +--- + include/soc/bcm2835/raspberrypi-firmware.h | 28 +++++++++++++++++++++- + 1 file changed, 27 insertions(+), 1 deletion(-) + +--- a/include/soc/bcm2835/raspberrypi-firmware.h ++++ b/include/soc/bcm2835/raspberrypi-firmware.h +@@ -36,6 +36,8 @@ struct rpi_firmware_property_tag_header + enum rpi_firmware_property_tag { + RPI_FIRMWARE_PROPERTY_END = 0, + RPI_FIRMWARE_GET_FIRMWARE_REVISION = 0x00000001, ++ RPI_FIRMWARE_GET_FIRMWARE_VARIANT = 0x00000002, ++ RPI_FIRMWARE_GET_FIRMWARE_HASH = 0x00000003, + + RPI_FIRMWARE_SET_CURSOR_INFO = 0x00008010, + RPI_FIRMWARE_SET_CURSOR_STATE = 0x00008011, +@@ -71,6 +73,7 @@ enum rpi_firmware_property_tag { + RPI_FIRMWARE_GET_DISPMANX_RESOURCE_MEM_HANDLE = 0x00030014, + RPI_FIRMWARE_GET_EDID_BLOCK = 0x00030020, + RPI_FIRMWARE_GET_CUSTOMER_OTP = 0x00030021, ++ RPI_FIRMWARE_GET_EDID_BLOCK_DISPLAY = 0x00030023, + RPI_FIRMWARE_GET_DOMAIN_STATE = 0x00030030, + RPI_FIRMWARE_GET_THROTTLED = 0x00030046, + RPI_FIRMWARE_GET_CLOCK_MEASURED = 0x00030047, +@@ -89,8 +92,11 @@ enum rpi_firmware_property_tag { + RPI_FIRMWARE_GET_PERIPH_REG = 0x00030045, + RPI_FIRMWARE_SET_PERIPH_REG = 0x00038045, + RPI_FIRMWARE_GET_POE_HAT_VAL = 0x00030049, +- RPI_FIRMWARE_SET_POE_HAT_VAL = 0x00030050, ++ RPI_FIRMWARE_SET_POE_HAT_VAL = 0x00038049, ++ RPI_FIRMWARE_SET_POE_HAT_VAL_OLD = 0x00030050, + RPI_FIRMWARE_NOTIFY_XHCI_RESET = 0x00030058, ++ RPI_FIRMWARE_GET_REBOOT_FLAGS = 0x00030064, ++ RPI_FIRMWARE_SET_REBOOT_FLAGS = 0x00038064, + RPI_FIRMWARE_NOTIFY_DISPLAY_DONE = 0x00030066, + + /* Dispmanx TAGS */ +@@ -105,9 +111,16 @@ enum rpi_firmware_property_tag { + RPI_FIRMWARE_FRAMEBUFFER_GET_VIRTUAL_OFFSET = 0x00040009, + RPI_FIRMWARE_FRAMEBUFFER_GET_OVERSCAN = 0x0004000a, + RPI_FIRMWARE_FRAMEBUFFER_GET_PALETTE = 0x0004000b, ++ RPI_FIRMWARE_FRAMEBUFFER_GET_LAYER = 0x0004000c, ++ RPI_FIRMWARE_FRAMEBUFFER_GET_TRANSFORM = 0x0004000d, ++ RPI_FIRMWARE_FRAMEBUFFER_GET_VSYNC = 0x0004000e, + RPI_FIRMWARE_FRAMEBUFFER_GET_TOUCHBUF = 0x0004000f, + RPI_FIRMWARE_FRAMEBUFFER_GET_GPIOVIRTBUF = 0x00040010, + RPI_FIRMWARE_FRAMEBUFFER_RELEASE = 0x00048001, ++ RPI_FIRMWARE_FRAMEBUFFER_GET_DISPLAY_ID = 0x00040016, ++ RPI_FIRMWARE_FRAMEBUFFER_SET_DISPLAY_NUM = 0x00048013, ++ RPI_FIRMWARE_FRAMEBUFFER_GET_NUM_DISPLAYS = 0x00040013, ++ RPI_FIRMWARE_FRAMEBUFFER_GET_DISPLAY_SETTINGS = 0x00040014, + RPI_FIRMWARE_FRAMEBUFFER_TEST_PHYSICAL_WIDTH_HEIGHT = 0x00044003, + RPI_FIRMWARE_FRAMEBUFFER_TEST_VIRTUAL_WIDTH_HEIGHT = 0x00044004, + RPI_FIRMWARE_FRAMEBUFFER_TEST_DEPTH = 0x00044005, +@@ -116,22 +129,33 @@ enum rpi_firmware_property_tag { + RPI_FIRMWARE_FRAMEBUFFER_TEST_VIRTUAL_OFFSET = 0x00044009, + RPI_FIRMWARE_FRAMEBUFFER_TEST_OVERSCAN = 0x0004400a, + RPI_FIRMWARE_FRAMEBUFFER_TEST_PALETTE = 0x0004400b, ++ RPI_FIRMWARE_FRAMEBUFFER_TEST_LAYER = 0x0004400c, ++ RPI_FIRMWARE_FRAMEBUFFER_TEST_TRANSFORM = 0x0004400d, + RPI_FIRMWARE_FRAMEBUFFER_TEST_VSYNC = 0x0004400e, + RPI_FIRMWARE_FRAMEBUFFER_SET_PHYSICAL_WIDTH_HEIGHT = 0x00048003, + RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_WIDTH_HEIGHT = 0x00048004, + RPI_FIRMWARE_FRAMEBUFFER_SET_DEPTH = 0x00048005, + RPI_FIRMWARE_FRAMEBUFFER_SET_PIXEL_ORDER = 0x00048006, + RPI_FIRMWARE_FRAMEBUFFER_SET_ALPHA_MODE = 0x00048007, ++ RPI_FIRMWARE_FRAMEBUFFER_SET_PITCH = 0x00048008, + RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_OFFSET = 0x00048009, + RPI_FIRMWARE_FRAMEBUFFER_SET_OVERSCAN = 0x0004800a, + RPI_FIRMWARE_FRAMEBUFFER_SET_PALETTE = 0x0004800b, ++ + RPI_FIRMWARE_FRAMEBUFFER_SET_TOUCHBUF = 0x0004801f, + RPI_FIRMWARE_FRAMEBUFFER_SET_GPIOVIRTBUF = 0x00048020, + RPI_FIRMWARE_FRAMEBUFFER_SET_VSYNC = 0x0004800e, ++ RPI_FIRMWARE_FRAMEBUFFER_SET_LAYER = 0x0004800c, ++ RPI_FIRMWARE_FRAMEBUFFER_SET_TRANSFORM = 0x0004800d, + RPI_FIRMWARE_FRAMEBUFFER_SET_BACKLIGHT = 0x0004800f, + + RPI_FIRMWARE_VCHIQ_INIT = 0x00048010, + ++ RPI_FIRMWARE_SET_PLANE = 0x00048015, ++ RPI_FIRMWARE_GET_DISPLAY_TIMING = 0x00040017, ++ RPI_FIRMWARE_SET_TIMING = 0x00048017, ++ RPI_FIRMWARE_GET_DISPLAY_CFG = 0x00040018, ++ RPI_FIRMWARE_SET_DISPLAY_POWER = 0x00048019, + RPI_FIRMWARE_GET_COMMAND_LINE = 0x00050001, + RPI_FIRMWARE_GET_DMA_CHANNELS = 0x00060001, + }; +@@ -155,6 +179,8 @@ enum rpi_firmware_clk_id { + RPI_FIRMWARE_NUM_CLK_ID, + }; + ++#define GET_DISPLAY_SETTINGS_PAYLOAD_SIZE 64 ++ + /** + * struct rpi_firmware_clk_rate_request - Firmware Request for a rate + * @id: ID of the clock being queried diff --git a/target/linux/bcm27xx/patches-6.6/950-0004-drm-vc4-Add-FKMS-as-an-acceptable-node-for-dma-range.patch b/target/linux/bcm27xx/patches-6.6/950-0004-drm-vc4-Add-FKMS-as-an-acceptable-node-for-dma-range.patch new file mode 100644 index 0000000000..5434b1d642 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.6/950-0004-drm-vc4-Add-FKMS-as-an-acceptable-node-for-dma-range.patch @@ -0,0 +1,27 @@ +From 719d68c874bde83f2410dc41a34c3ddf6d71bda9 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 19 May 2020 16:20:30 +0100 +Subject: [PATCH 0004/1085] drm/vc4: Add FKMS as an acceptable node for dma + ranges. + +Under FKMS, the firmware (via FKMS) also requires the VideoCore cache +aliases for image planes, as defined by the dma-ranges under /soc. + +Add rpi-firmware-kms to the list of acceptable nodes to look for +to copy dma config from. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_drv.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/gpu/drm/vc4/vc4_drv.c ++++ b/drivers/gpu/drm/vc4/vc4_drv.c +@@ -276,6 +276,7 @@ static void vc4_component_unbind_all(voi + static const struct of_device_id vc4_dma_range_matches[] = { + { .compatible = "brcm,bcm2711-hvs" }, + { .compatible = "brcm,bcm2835-hvs" }, ++ { .compatible = "raspberrypi,rpi-firmware-kms" }, + { .compatible = "brcm,bcm2835-v3d" }, + { .compatible = "brcm,cygnus-v3d" }, + { .compatible = "brcm,vc4-v3d" }, diff --git a/target/linux/bcm27xx/patches-6.6/950-0005-drm-atomic-Don-t-fixup-modes-that-haven-t-been-reset.patch b/target/linux/bcm27xx/patches-6.6/950-0005-drm-atomic-Don-t-fixup-modes-that-haven-t-been-reset.patch new file mode 100644 index 0000000000..a27b7144a1 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.6/950-0005-drm-atomic-Don-t-fixup-modes-that-haven-t-been-reset.patch @@ -0,0 +1,25 @@ +From de213e0c7477e4c1be9a80cd9ebf97227ed75dbe Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Thu, 7 Jan 2021 16:30:55 +0000 +Subject: [PATCH 0005/1085] drm/atomic: Don't fixup modes that haven't been + reset + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/drm_atomic_helper.c | 5 +++++ + 1 file changed, 5 insertions(+) + +--- a/drivers/gpu/drm/drm_atomic_helper.c ++++ b/drivers/gpu/drm/drm_atomic_helper.c +@@ -443,6 +443,11 @@ mode_fixup(struct drm_atomic_state *stat + new_crtc_state = + drm_atomic_get_new_crtc_state(state, new_conn_state->crtc); + ++ if (!new_crtc_state->mode_changed && ++ !new_crtc_state->connectors_changed) { ++ continue; ++ } ++ + /* + * Each encoder has at most one connector (since we always steal + * it away), so we won't call ->mode_fixup twice. diff --git a/target/linux/bcm27xx/patches-6.6/950-0006-drm-vc4-Allow-setting-the-TV-norm-via-module-paramet.patch b/target/linux/bcm27xx/patches-6.6/950-0006-drm-vc4-Allow-setting-the-TV-norm-via-module-paramet.patch new file mode 100644 index 0000000000..b2fa8c8f57 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.6/950-0006-drm-vc4-Allow-setting-the-TV-norm-via-module-paramet.patch @@ -0,0 +1,210 @@ +From 4fac21e3a4d37667a86c762064dad5f76c42c235 Mon Sep 17 00:00:00 2001 +From: Mateusz Kwiatkowski +Date: Thu, 15 Jul 2021 01:08:01 +0200 +Subject: [PATCH 0006/1085] drm/vc4: Allow setting the TV norm via module + parameter + +Similar to the ch7006 and nouveau drivers, introduce a "tv_mode" module +parameter that allow setting the TV norm by specifying vc4.tv_norm= on +the kernel command line. + +If that is not specified, try inferring one of the most popular norms +(PAL or NTSC) from the video mode specified on the command line. On +Raspberry Pis, this causes the most common cases of the sdtv_mode +setting in config.txt to be respected. + +Signed-off-by: Mateusz Kwiatkowski +--- + drivers/gpu/drm/vc4/vc4_vec.c | 108 +++++++++++++++++++++++++--------- + 1 file changed, 81 insertions(+), 27 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_vec.c ++++ b/drivers/gpu/drm/vc4/vc4_vec.c +@@ -67,7 +67,7 @@ + #define VEC_CONFIG0_YCDELAY BIT(4) + #define VEC_CONFIG0_RAMPEN BIT(2) + #define VEC_CONFIG0_YCDIS BIT(2) +-#define VEC_CONFIG0_STD_MASK GENMASK(1, 0) ++#define VEC_CONFIG0_STD_MASK (VEC_CONFIG0_SECAM_STD | GENMASK(1, 0)) + #define VEC_CONFIG0_NTSC_STD 0 + #define VEC_CONFIG0_PAL_BDGHI_STD 1 + #define VEC_CONFIG0_PAL_M_STD 2 +@@ -186,6 +186,8 @@ + #define VEC_DAC_MISC_DAC_RST_N BIT(0) + + ++static char *vc4_vec_tv_norm; ++ + struct vc4_vec_variant { + u32 dac_config; + }; +@@ -353,6 +355,33 @@ static const struct drm_prop_enum_list l + { VC4_VEC_TV_MODE_SECAM, "SECAM", }, + }; + ++enum drm_connector_tv_mode ++vc4_vec_get_default_mode(struct drm_connector *connector) ++{ ++ if (vc4_vec_tv_norm) { ++ int ret; ++ ++ ret = drm_get_tv_mode_from_name(vc4_vec_tv_norm, strlen(vc4_vec_tv_norm)); ++ if (ret >= 0) ++ return ret; ++ } else if (connector->cmdline_mode.specified && ++ ((connector->cmdline_mode.refresh_specified && ++ (connector->cmdline_mode.refresh == 25 || ++ connector->cmdline_mode.refresh == 50)) || ++ (!connector->cmdline_mode.refresh_specified && ++ (connector->cmdline_mode.yres == 288 || ++ connector->cmdline_mode.yres == 576)))) { ++ /* ++ * no explicitly specified TV norm; use PAL if a mode that ++ * looks like PAL has been specified on the command line ++ */ ++ return DRM_MODE_TV_MODE_PAL; ++ } ++ ++ /* in all other cases, default to NTSC */ ++ return DRM_MODE_TV_MODE_NTSC; ++} ++ + static enum drm_connector_status + vc4_vec_connector_detect(struct drm_connector *connector, bool force) + { +@@ -363,6 +392,10 @@ static void vc4_vec_connector_reset(stru + { + drm_atomic_helper_connector_reset(connector); + drm_atomic_helper_connector_tv_reset(connector); ++ ++ /* preserve TV standard */ ++ if (connector->state) ++ connector->state->tv.mode = vc4_vec_get_default_mode(connector); + } + + static int +@@ -414,48 +447,52 @@ vc4_vec_connector_set_property(struct dr + } + + static int +-vc4_vec_connector_get_property(struct drm_connector *connector, +- const struct drm_connector_state *state, +- struct drm_property *property, +- uint64_t *val) ++vc4_vec_generic_tv_mode_to_legacy(enum drm_connector_tv_mode tv_mode) + { +- struct vc4_vec *vec = connector_to_vc4_vec(connector); +- +- if (property != vec->legacy_tv_mode_property) +- return -EINVAL; +- +- switch (state->tv.mode) { ++ switch (tv_mode) { + case DRM_MODE_TV_MODE_NTSC: +- *val = VC4_VEC_TV_MODE_NTSC; +- break; ++ return VC4_VEC_TV_MODE_NTSC; + + case DRM_MODE_TV_MODE_NTSC_443: +- *val = VC4_VEC_TV_MODE_NTSC_443; +- break; ++ return VC4_VEC_TV_MODE_NTSC_443; + + case DRM_MODE_TV_MODE_NTSC_J: +- *val = VC4_VEC_TV_MODE_NTSC_J; +- break; ++ return VC4_VEC_TV_MODE_NTSC_J; + + case DRM_MODE_TV_MODE_PAL: +- *val = VC4_VEC_TV_MODE_PAL; +- break; ++ return VC4_VEC_TV_MODE_PAL; + + case DRM_MODE_TV_MODE_PAL_M: +- *val = VC4_VEC_TV_MODE_PAL_M; +- break; ++ return VC4_VEC_TV_MODE_PAL_M; + + case DRM_MODE_TV_MODE_PAL_N: +- *val = VC4_VEC_TV_MODE_PAL_N; +- break; ++ return VC4_VEC_TV_MODE_PAL_N; + + case DRM_MODE_TV_MODE_SECAM: +- *val = VC4_VEC_TV_MODE_SECAM; +- break; ++ return VC4_VEC_TV_MODE_SECAM; + + default: + return -EINVAL; + } ++} ++ ++static int ++vc4_vec_connector_get_property(struct drm_connector *connector, ++ const struct drm_connector_state *state, ++ struct drm_property *property, ++ uint64_t *val) ++{ ++ struct vc4_vec *vec = connector_to_vc4_vec(connector); ++ enum vc4_vec_tv_mode_id legacy_mode; ++ ++ if (property != vec->legacy_tv_mode_property) ++ return -EINVAL; ++ ++ legacy_mode = vc4_vec_generic_tv_mode_to_legacy(state->tv.mode); ++ if (legacy_mode < 0) ++ return legacy_mode; ++ ++ *val = legacy_mode; + + return 0; + } +@@ -478,6 +515,8 @@ static const struct drm_connector_helper + static int vc4_vec_connector_init(struct drm_device *dev, struct vc4_vec *vec) + { + struct drm_connector *connector = &vec->connector; ++ enum vc4_vec_tv_mode_id legacy_default_mode; ++ enum drm_connector_tv_mode default_mode; + struct drm_property *prop; + int ret; + +@@ -490,9 +529,17 @@ static int vc4_vec_connector_init(struct + + drm_connector_helper_add(connector, &vc4_vec_connector_helper_funcs); + ++ default_mode = vc4_vec_get_default_mode(connector); ++ if (default_mode < 0) ++ return default_mode; ++ + drm_object_attach_property(&connector->base, + dev->mode_config.tv_mode_property, +- DRM_MODE_TV_MODE_NTSC); ++ default_mode); ++ ++ legacy_default_mode = vc4_vec_generic_tv_mode_to_legacy(default_mode); ++ if (legacy_default_mode < 0) ++ return legacy_default_mode; + + prop = drm_property_create_enum(dev, 0, "mode", + legacy_tv_mode_names, +@@ -501,7 +548,7 @@ static int vc4_vec_connector_init(struct + return -ENOMEM; + vec->legacy_tv_mode_property = prop; + +- drm_object_attach_property(&connector->base, prop, VC4_VEC_TV_MODE_NTSC); ++ drm_object_attach_property(&connector->base, prop, legacy_default_mode); + + drm_connector_attach_encoder(connector, &vec->encoder.base); + +@@ -825,3 +872,10 @@ struct platform_driver vc4_vec_driver = + .of_match_table = vc4_vec_dt_match, + }, + }; ++ ++module_param_named(tv_norm, vc4_vec_tv_norm, charp, 0600); ++MODULE_PARM_DESC(tv_norm, "Default TV norm.\n" ++ "\t\tSupported: NTSC, NTSC-J, NTSC-443, PAL, PAL-M, PAL-N,\n" ++ "\t\t\tPAL60, SECAM.\n" ++ "\t\tDefault: PAL if a 50 Hz mode has been set via video=,\n" ++ "\t\t\tNTSC otherwise"); diff --git a/target/linux/bcm27xx/patches-6.6/950-0007-drm-vc4-Add-firmware-kms-mode.patch b/target/linux/bcm27xx/patches-6.6/950-0007-drm-vc4-Add-firmware-kms-mode.patch new file mode 100644 index 0000000000..c755e81435 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.6/950-0007-drm-vc4-Add-firmware-kms-mode.patch @@ -0,0 +1,2554 @@ +From 874cf57daa68a80ad2a09476b8ec04ac45c1dc4e Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 7 Sep 2020 17:32:27 +0100 +Subject: [PATCH 0007/1085] drm/vc4: Add firmware-kms mode + +This is a squash of all firmware-kms related patches from previous +branches, up to and including +"drm/vc4: Set the possible crtcs mask correctly for planes with FKMS" +plus a couple of minor fixups for the 5.9 branch. +Please refer to earlier branches for full history. + +This patch includes work by Eric Anholt, James Hughes, Phil Elwell, +Dave Stevenson, Dom Cobley, and Jonathon Bell. + +Signed-off-by: Dave Stevenson + +drm/vc4: Fixup firmware-kms after "drm/atomic: Pass the full state to CRTC atomic enable/disable" + +Prototype for those calls changed, so amend fkms (which isn't +upstream) to match. + +Signed-off-by: Dave Stevenson + +drm/vc4: Fixup fkms for API change + +Atomic flush and check changed API, so fix up the downstream-only +FKMS driver. + +Signed-off-by: Dave Stevenson + +drm/vc4: Make normalize_zpos conditional on using fkms + +Eric's view was that there was no point in having zpos +support on vc4 as all the planes had the same functionality. + +Can be later squashed into (and fixes): +drm/vc4: Add firmware-kms mode + +Signed-off-by: Dom Cobley + +drm/vc4: FKMS: Change of Broadcast RGB mode needs a mode change + +The Broadcast RGB (aka HDMI limited/full range) property is only +notified to the firmware on mode change, so this needs to be +signalled when set. + +https://github.com/raspberrypi/firmware/issues/1580 + +Signed-off-by: Dave Stevenson + +vc4/drv: Only notify firmware of display done with kms + +fkms driver still wants firmware display to be active + +Signed-off-by: Dom Cobley + +ydrm/vc4: fkms: Fix margin calculations for the right/bottom edges + +The calculations clipped the right/bottom edge of the clipped +range based on the left/top margins. + +https://github.com/raspberrypi/linux/issues/4447 + +Signed-off-by: Dave Stevenson + +drm/vc4: fkms: Use new devm_rpi_firmware_get api + +drm/kms: Add allow_fb_modifiers + +Signed-off-by: Dom Cobley + +drm/vc4: Add async update support for cursor planes + +Now that cursors are implemented as regular planes, all cursor +movements result in atomic updates. As the firmware-kms driver +doesn't support asynchronous updates, these are synchronous, which +limits the update rate to the screen refresh rate. Xorg seems unaware +of this (or at least of the effect of this), because if the mouse is +configured with a higher update rate than the screen then continuous +mouse movement results in an increasing backlog of mouse events - +cue extreme lag. + +Add minimal support for asynchronous updates - limited to cursor +planes - to eliminate the lag. + +See: https://github.com/raspberrypi/linux/pull/4971 + https://github.com/raspberrypi/linux/issues/4988 + +Signed-off-by: Phil Elwell + +drivers/gpu/drm/vc4: Add missing 32-bit RGB formats + +The missing 32-bit per pixel ABGR and various "RGB with an X value" +formats are added. Change sent by Dave Stevenson. + +Signed-off-by: David Plowman + +drm: vc4: Fixup duplicated macro definition in vc4_firmware_kms + +Both vc4_drv.h and vc4_firmware_kms.c had definitions for +to_vc4_crtc. + +Rename the fkms one to make it unique, and drop the magic +define vc4_crtc vc4_kms_crtc +define to_vc4_crtc to_vc4_kms_crtc +that renamed half the variable and function names in a slightly +unexpected way. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/Makefile | 1 + + drivers/gpu/drm/vc4/vc4_debugfs.c | 3 +- + drivers/gpu/drm/vc4/vc4_drv.c | 29 +- + drivers/gpu/drm/vc4/vc4_drv.h | 7 + + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 2045 ++++++++++++++++++++++++ + drivers/gpu/drm/vc4/vc4_kms.c | 33 +- + drivers/gpu/drm/vc4/vc_image_types.h | 175 ++ + 7 files changed, 2279 insertions(+), 14 deletions(-) + create mode 100644 drivers/gpu/drm/vc4/vc4_firmware_kms.c + create mode 100644 drivers/gpu/drm/vc4/vc_image_types.h + +--- a/drivers/gpu/drm/vc4/Makefile ++++ b/drivers/gpu/drm/vc4/Makefile +@@ -9,6 +9,7 @@ vc4-y := \ + vc4_dpi.o \ + vc4_dsi.o \ + vc4_fence.o \ ++ vc4_firmware_kms.o \ + vc4_kms.o \ + vc4_gem.o \ + vc4_hdmi.o \ +--- a/drivers/gpu/drm/vc4/vc4_debugfs.c ++++ b/drivers/gpu/drm/vc4/vc4_debugfs.c +@@ -24,7 +24,8 @@ vc4_debugfs_init(struct drm_minor *minor + struct vc4_dev *vc4 = to_vc4_dev(minor->dev); + struct drm_device *drm = &vc4->base; + +- drm_WARN_ON(drm, vc4_hvs_debugfs_init(minor)); ++ if (vc4->hvs) ++ drm_WARN_ON(drm, vc4_hvs_debugfs_init(minor)); + + if (vc4->v3d) { + drm_WARN_ON(drm, vc4_bo_debugfs_init(minor)); +--- a/drivers/gpu/drm/vc4/vc4_drv.c ++++ b/drivers/gpu/drm/vc4/vc4_drv.c +@@ -283,6 +283,18 @@ static const struct of_device_id vc4_dma + {} + }; + ++/* ++ * we need this helper function for determining presence of fkms ++ * before it's been bound ++ */ ++static bool firmware_kms(void) ++{ ++ return of_device_is_available(of_find_compatible_node(NULL, NULL, ++ "raspberrypi,rpi-firmware-kms")) || ++ of_device_is_available(of_find_compatible_node(NULL, NULL, ++ "raspberrypi,rpi-firmware-kms-2711")); ++} ++ + static int vc4_drm_bind(struct device *dev) + { + struct platform_device *pdev = to_platform_device(dev); +@@ -355,7 +367,7 @@ static int vc4_drm_bind(struct device *d + if (ret) + return ret; + +- if (firmware) { ++ if (firmware && !firmware_kms()) { + ret = rpi_firmware_property(firmware, + RPI_FIRMWARE_NOTIFY_DISPLAY_DONE, + NULL, 0); +@@ -373,16 +385,20 @@ static int vc4_drm_bind(struct device *d + if (ret) + return ret; + +- ret = vc4_plane_create_additional_planes(drm); +- if (ret) +- goto unbind_all; ++ if (!vc4->firmware_kms) { ++ ret = vc4_plane_create_additional_planes(drm); ++ if (ret) ++ return ret; ++ } + + ret = vc4_kms_load(drm); + if (ret < 0) + goto unbind_all; + +- drm_for_each_crtc(crtc, drm) +- vc4_crtc_disable_at_boot(crtc); ++ if (!vc4->firmware_kms) { ++ drm_for_each_crtc(crtc, drm) ++ vc4_crtc_disable_at_boot(crtc); ++ } + + ret = drm_dev_register(drm, 0); + if (ret < 0) +@@ -426,6 +442,7 @@ static struct platform_driver *const com + &vc4_dsi_driver, + &vc4_txp_driver, + &vc4_crtc_driver, ++ &vc4_firmware_kms_driver, + &vc4_v3d_driver, + }; + +--- a/drivers/gpu/drm/vc4/vc4_drv.h ++++ b/drivers/gpu/drm/vc4/vc4_drv.h +@@ -87,8 +87,12 @@ struct vc4_dev { + + unsigned int irq; + ++ bool firmware_kms; ++ struct rpi_firmware *firmware; ++ + struct vc4_hvs *hvs; + struct vc4_v3d *v3d; ++ struct vc4_fkms *fkms; + + struct vc4_hang_state *hang_state; + +@@ -963,6 +967,9 @@ extern struct platform_driver vc4_dsi_dr + /* vc4_fence.c */ + extern const struct dma_fence_ops vc4_fence_ops; + ++/* vc4_firmware_kms.c */ ++extern struct platform_driver vc4_firmware_kms_driver; ++ + /* vc4_gem.c */ + int vc4_gem_init(struct drm_device *dev); + int vc4_submit_cl_ioctl(struct drm_device *dev, void *data, +--- /dev/null ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -0,0 +1,2045 @@ ++// SPDX-License-Identifier: GPL-2.0-only ++/* ++ * Copyright (C) 2016 Broadcom ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++/** ++ * DOC: VC4 firmware KMS module. ++ * ++ * As a hack to get us from the current closed source driver world ++ * toward a totally open stack, implement KMS on top of the Raspberry ++ * Pi's firmware display stack. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++#include ++ ++#include "vc4_drv.h" ++#include "vc4_regs.h" ++#include "vc_image_types.h" ++ ++int fkms_max_refresh_rate = 85; ++module_param(fkms_max_refresh_rate, int, 0644); ++MODULE_PARM_DESC(fkms_max_refresh_rate, "Max supported refresh rate"); ++ ++struct get_display_cfg { ++ u32 max_pixel_clock[2]; //Max pixel clock for each display ++}; ++ ++struct vc4_fkms { ++ struct get_display_cfg cfg; ++ bool bcm2711; ++}; ++ ++#define PLANES_PER_CRTC 8 ++ ++struct set_plane { ++ u8 display; ++ u8 plane_id; ++ u8 vc_image_type; ++ s8 layer; ++ ++ u16 width; ++ u16 height; ++ ++ u16 pitch; ++ u16 vpitch; ++ ++ u32 src_x; /* 16p16 */ ++ u32 src_y; /* 16p16 */ ++ ++ u32 src_w; /* 16p16 */ ++ u32 src_h; /* 16p16 */ ++ ++ s16 dst_x; ++ s16 dst_y; ++ ++ u16 dst_w; ++ u16 dst_h; ++ ++ u8 alpha; ++ u8 num_planes; ++ u8 is_vu; ++ u8 color_encoding; ++ ++ u32 planes[4]; /* DMA address of each plane */ ++ ++ u32 transform; ++}; ++ ++/* Values for the transform field */ ++#define TRANSFORM_NO_ROTATE 0 ++#define TRANSFORM_ROTATE_180 BIT(1) ++#define TRANSFORM_FLIP_HRIZ BIT(16) ++#define TRANSFORM_FLIP_VERT BIT(17) ++ ++struct mailbox_set_plane { ++ struct rpi_firmware_property_tag_header tag; ++ struct set_plane plane; ++}; ++ ++struct mailbox_blank_display { ++ struct rpi_firmware_property_tag_header tag1; ++ u32 display; ++ struct rpi_firmware_property_tag_header tag2; ++ u32 blank; ++}; ++ ++struct mailbox_display_pwr { ++ struct rpi_firmware_property_tag_header tag1; ++ u32 display; ++ u32 state; ++}; ++ ++struct mailbox_get_edid { ++ struct rpi_firmware_property_tag_header tag1; ++ u32 block; ++ u32 display_number; ++ u8 edid[128]; ++}; ++ ++struct set_timings { ++ u8 display; ++ u8 padding; ++ u16 video_id_code; ++ ++ u32 clock; /* in kHz */ ++ ++ u16 hdisplay; ++ u16 hsync_start; ++ ++ u16 hsync_end; ++ u16 htotal; ++ ++ u16 hskew; ++ u16 vdisplay; ++ ++ u16 vsync_start; ++ u16 vsync_end; ++ ++ u16 vtotal; ++ u16 vscan; ++ ++ u16 vrefresh; ++ u16 padding2; ++ ++ u32 flags; ++#define TIMINGS_FLAGS_H_SYNC_POS BIT(0) ++#define TIMINGS_FLAGS_H_SYNC_NEG 0 ++#define TIMINGS_FLAGS_V_SYNC_POS BIT(1) ++#define TIMINGS_FLAGS_V_SYNC_NEG 0 ++#define TIMINGS_FLAGS_INTERLACE BIT(2) ++ ++#define TIMINGS_FLAGS_ASPECT_MASK GENMASK(7, 4) ++#define TIMINGS_FLAGS_ASPECT_NONE (0 << 4) ++#define TIMINGS_FLAGS_ASPECT_4_3 (1 << 4) ++#define TIMINGS_FLAGS_ASPECT_16_9 (2 << 4) ++#define TIMINGS_FLAGS_ASPECT_64_27 (3 << 4) ++#define TIMINGS_FLAGS_ASPECT_256_135 (4 << 4) ++ ++/* Limited range RGB flag. Not set corresponds to full range. */ ++#define TIMINGS_FLAGS_RGB_LIMITED BIT(8) ++/* DVI monitor, therefore disable infoframes. Not set corresponds to HDMI. */ ++#define TIMINGS_FLAGS_DVI BIT(9) ++/* Double clock */ ++#define TIMINGS_FLAGS_DBL_CLK BIT(10) ++}; ++ ++struct mailbox_set_mode { ++ struct rpi_firmware_property_tag_header tag1; ++ struct set_timings timings; ++}; ++ ++static const struct vc_image_format { ++ u32 drm; /* DRM_FORMAT_* */ ++ u32 vc_image; /* VC_IMAGE_* */ ++ u32 is_vu; ++} vc_image_formats[] = { ++ { ++ .drm = DRM_FORMAT_XRGB8888, ++ .vc_image = VC_IMAGE_XRGB8888, ++ }, ++ { ++ .drm = DRM_FORMAT_ARGB8888, ++ .vc_image = VC_IMAGE_ARGB8888, ++ }, ++ { ++ .drm = DRM_FORMAT_XBGR8888, ++ .vc_image = VC_IMAGE_RGBX32, ++ }, ++ { ++ .drm = DRM_FORMAT_ABGR8888, ++ .vc_image = VC_IMAGE_RGBA32, ++ }, ++ { ++ .drm = DRM_FORMAT_RGBX8888, ++ .vc_image = VC_IMAGE_BGRX8888, ++ }, ++ { ++ .drm = DRM_FORMAT_BGRX8888, ++ .vc_image = VC_IMAGE_RGBX8888, ++ }, ++ { ++ .drm = DRM_FORMAT_RGB565, ++ .vc_image = VC_IMAGE_RGB565, ++ }, ++ { ++ .drm = DRM_FORMAT_RGB888, ++ .vc_image = VC_IMAGE_BGR888, ++ }, ++ { ++ .drm = DRM_FORMAT_BGR888, ++ .vc_image = VC_IMAGE_RGB888, ++ }, ++ { ++ .drm = DRM_FORMAT_YUV422, ++ .vc_image = VC_IMAGE_YUV422PLANAR, ++ }, ++ { ++ .drm = DRM_FORMAT_YUV420, ++ .vc_image = VC_IMAGE_YUV420, ++ }, ++ { ++ .drm = DRM_FORMAT_YVU420, ++ .vc_image = VC_IMAGE_YUV420, ++ .is_vu = 1, ++ }, ++ { ++ .drm = DRM_FORMAT_NV12, ++ .vc_image = VC_IMAGE_YUV420SP, ++ }, ++ { ++ .drm = DRM_FORMAT_NV21, ++ .vc_image = VC_IMAGE_YUV420SP, ++ .is_vu = 1, ++ }, ++ { ++ .drm = DRM_FORMAT_P030, ++ .vc_image = VC_IMAGE_YUV10COL, ++ }, ++}; ++ ++static const struct vc_image_format *vc4_get_vc_image_fmt(u32 drm_format) ++{ ++ unsigned int i; ++ ++ for (i = 0; i < ARRAY_SIZE(vc_image_formats); i++) { ++ if (vc_image_formats[i].drm == drm_format) ++ return &vc_image_formats[i]; ++ } ++ ++ return NULL; ++} ++ ++/* The firmware delivers a vblank interrupt to us through the SMI ++ * hardware, which has only this one register. ++ */ ++#define SMICS 0x0 ++#define SMIDSW0 0x14 ++#define SMIDSW1 0x1C ++#define SMICS_INTERRUPTS (BIT(9) | BIT(10) | BIT(11)) ++ ++/* Flag to denote that the firmware is giving multiple display callbacks */ ++#define SMI_NEW 0xabcd0000 ++ ++struct vc4_fkms_crtc { ++ struct drm_crtc base; ++ struct drm_encoder *encoder; ++ struct drm_connector *connector; ++ void __iomem *regs; ++ ++ struct drm_pending_vblank_event *event; ++ bool vblank_enabled; ++ u32 display_number; ++ u32 display_type; ++}; ++ ++static inline struct vc4_fkms_crtc *to_vc4_fkms_crtc(struct drm_crtc *crtc) ++{ ++ return container_of(crtc, struct vc4_fkms_crtc, base); ++} ++ ++struct vc4_fkms_encoder { ++ struct drm_encoder base; ++ bool hdmi_monitor; ++ bool rgb_range_selectable; ++ int display_num; ++}; ++ ++static inline struct vc4_fkms_encoder * ++to_vc4_fkms_encoder(struct drm_encoder *encoder) ++{ ++ return container_of(encoder, struct vc4_fkms_encoder, base); ++} ++ ++/* "Broadcast RGB" property. ++ * Allows overriding of HDMI full or limited range RGB ++ */ ++#define VC4_BROADCAST_RGB_AUTO 0 ++#define VC4_BROADCAST_RGB_FULL 1 ++#define VC4_BROADCAST_RGB_LIMITED 2 ++ ++/* VC4 FKMS connector KMS struct */ ++struct vc4_fkms_connector { ++ struct drm_connector base; ++ ++ /* Since the connector is attached to just the one encoder, ++ * this is the reference to it so we can do the best_encoder() ++ * hook. ++ */ ++ struct drm_encoder *encoder; ++ struct vc4_dev *vc4_dev; ++ u32 display_number; ++ u32 display_type; ++ ++ struct drm_property *broadcast_rgb_property; ++}; ++ ++static inline struct vc4_fkms_connector * ++to_vc4_fkms_connector(struct drm_connector *connector) ++{ ++ return container_of(connector, struct vc4_fkms_connector, base); ++} ++ ++/* VC4 FKMS connector state */ ++struct vc4_fkms_connector_state { ++ struct drm_connector_state base; ++ ++ int broadcast_rgb; ++}; ++ ++#define to_vc4_fkms_connector_state(x) \ ++ container_of(x, struct vc4_fkms_connector_state, base) ++ ++static u32 vc4_get_display_type(u32 display_number) ++{ ++ const u32 display_types[] = { ++ /* The firmware display (DispmanX) IDs map to specific types in ++ * a fixed manner. ++ */ ++ DRM_MODE_ENCODER_DSI, /* MAIN_LCD - DSI or DPI */ ++ DRM_MODE_ENCODER_DSI, /* AUX_LCD */ ++ DRM_MODE_ENCODER_TMDS, /* HDMI0 */ ++ DRM_MODE_ENCODER_TVDAC, /* VEC */ ++ DRM_MODE_ENCODER_NONE, /* FORCE_LCD */ ++ DRM_MODE_ENCODER_NONE, /* FORCE_TV */ ++ DRM_MODE_ENCODER_NONE, /* FORCE_OTHER */ ++ DRM_MODE_ENCODER_TMDS, /* HDMI1 */ ++ DRM_MODE_ENCODER_NONE, /* FORCE_TV2 */ ++ }; ++ return display_number > ARRAY_SIZE(display_types) - 1 ? ++ DRM_MODE_ENCODER_NONE : display_types[display_number]; ++} ++ ++/* Firmware's structure for making an FB mbox call. */ ++struct fbinfo_s { ++ u32 xres, yres, xres_virtual, yres_virtual; ++ u32 pitch, bpp; ++ u32 xoffset, yoffset; ++ u32 base; ++ u32 screen_size; ++ u16 cmap[256]; ++}; ++ ++struct vc4_fkms_plane { ++ struct drm_plane base; ++ struct fbinfo_s *fbinfo; ++ dma_addr_t fbinfo_bus_addr; ++ u32 pitch; ++ struct mailbox_set_plane mb; ++}; ++ ++static inline struct vc4_fkms_plane *to_vc4_fkms_plane(struct drm_plane *plane) ++{ ++ return (struct vc4_fkms_plane *)plane; ++} ++ ++static int vc4_plane_set_blank(struct drm_plane *plane, bool blank) ++{ ++ struct vc4_dev *vc4 = to_vc4_dev(plane->dev); ++ struct vc4_fkms_plane *vc4_plane = to_vc4_fkms_plane(plane); ++ struct mailbox_set_plane blank_mb = { ++ .tag = { RPI_FIRMWARE_SET_PLANE, sizeof(struct set_plane), 0 }, ++ .plane = { ++ .display = vc4_plane->mb.plane.display, ++ .plane_id = vc4_plane->mb.plane.plane_id, ++ } ++ }; ++ static const char * const plane_types[] = { ++ "overlay", ++ "primary", ++ "cursor" ++ }; ++ int ret; ++ ++ DRM_DEBUG_ATOMIC("[PLANE:%d:%s] %s plane %s", ++ plane->base.id, plane->name, plane_types[plane->type], ++ blank ? "blank" : "unblank"); ++ ++ if (blank) ++ ret = rpi_firmware_property_list(vc4->firmware, &blank_mb, ++ sizeof(blank_mb)); ++ else ++ ret = rpi_firmware_property_list(vc4->firmware, &vc4_plane->mb, ++ sizeof(vc4_plane->mb)); ++ ++ WARN_ONCE(ret, "%s: firmware call failed. Please update your firmware", ++ __func__); ++ return ret; ++} ++ ++static void vc4_fkms_crtc_get_margins(struct drm_crtc_state *state, ++ unsigned int *left, unsigned int *right, ++ unsigned int *top, unsigned int *bottom) ++{ ++ struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(state); ++ struct drm_connector_state *conn_state; ++ struct drm_connector *conn; ++ int i; ++ ++ *left = vc4_state->margins.left; ++ *right = vc4_state->margins.right; ++ *top = vc4_state->margins.top; ++ *bottom = vc4_state->margins.bottom; ++ ++ /* We have to interate over all new connector states because ++ * vc4_fkms_crtc_get_margins() might be called before ++ * vc4_fkms_crtc_atomic_check() which means margins info in ++ * vc4_crtc_state might be outdated. ++ */ ++ for_each_new_connector_in_state(state->state, conn, conn_state, i) { ++ if (conn_state->crtc != state->crtc) ++ continue; ++ ++ *left = conn_state->tv.margins.left; ++ *right = conn_state->tv.margins.right; ++ *top = conn_state->tv.margins.top; ++ *bottom = conn_state->tv.margins.bottom; ++ break; ++ } ++} ++ ++static int vc4_fkms_margins_adj(struct drm_plane_state *pstate, ++ struct set_plane *plane) ++{ ++ unsigned int left, right, top, bottom; ++ int adjhdisplay, adjvdisplay; ++ struct drm_crtc_state *crtc_state; ++ ++ crtc_state = drm_atomic_get_new_crtc_state(pstate->state, ++ pstate->crtc); ++ ++ vc4_fkms_crtc_get_margins(crtc_state, &left, &right, &top, &bottom); ++ ++ if (!left && !right && !top && !bottom) ++ return 0; ++ ++ if (left + right >= crtc_state->mode.hdisplay || ++ top + bottom >= crtc_state->mode.vdisplay) ++ return -EINVAL; ++ ++ adjhdisplay = crtc_state->mode.hdisplay - (left + right); ++ plane->dst_x = DIV_ROUND_CLOSEST(plane->dst_x * adjhdisplay, ++ (int)crtc_state->mode.hdisplay); ++ plane->dst_x += left; ++ if (plane->dst_x > (int)(crtc_state->mode.hdisplay - right)) ++ plane->dst_x = crtc_state->mode.hdisplay - right; ++ ++ adjvdisplay = crtc_state->mode.vdisplay - (top + bottom); ++ plane->dst_y = DIV_ROUND_CLOSEST(plane->dst_y * adjvdisplay, ++ (int)crtc_state->mode.vdisplay); ++ plane->dst_y += top; ++ if (plane->dst_y > (int)(crtc_state->mode.vdisplay - bottom)) ++ plane->dst_y = crtc_state->mode.vdisplay - bottom; ++ ++ plane->dst_w = DIV_ROUND_CLOSEST(plane->dst_w * adjhdisplay, ++ crtc_state->mode.hdisplay); ++ plane->dst_h = DIV_ROUND_CLOSEST(plane->dst_h * adjvdisplay, ++ crtc_state->mode.vdisplay); ++ ++ if (!plane->dst_w || !plane->dst_h) ++ return -EINVAL; ++ ++ return 0; ++} ++ ++static void vc4_plane_atomic_update(struct drm_plane *plane, ++ struct drm_atomic_state *old_state) ++{ ++ struct drm_plane_state *state = plane->state; ++ ++ /* ++ * Do NOT set now, as we haven't checked if the crtc is active or not. ++ * Set from vc4_plane_set_blank instead. ++ * ++ * If the CRTC is on (or going to be on) and we're enabled, ++ * then unblank. Otherwise, stay blank until CRTC enable. ++ */ ++ if (state->crtc->state->active) ++ vc4_plane_set_blank(plane, false); ++} ++ ++static void vc4_plane_atomic_disable(struct drm_plane *plane, ++ struct drm_atomic_state *old_state) ++{ ++ struct drm_plane_state *state = plane->state; ++ struct vc4_fkms_plane *vc4_plane = to_vc4_fkms_plane(plane); ++ ++ DRM_DEBUG_ATOMIC("[PLANE:%d:%s] plane disable %dx%d@%d +%d,%d\n", ++ plane->base.id, plane->name, ++ state->crtc_w, ++ state->crtc_h, ++ vc4_plane->mb.plane.vc_image_type, ++ state->crtc_x, ++ state->crtc_y); ++ vc4_plane_set_blank(plane, true); ++} ++ ++static bool plane_enabled(struct drm_plane_state *state) ++{ ++ return state->fb && state->crtc; ++} ++ ++static int vc4_plane_to_mb(struct drm_plane *plane, ++ struct mailbox_set_plane *mb, ++ struct drm_plane_state *state) ++{ ++ struct drm_framebuffer *fb = state->fb; ++ struct drm_gem_dma_object *bo = drm_fb_dma_get_gem_obj(fb, 0); ++ const struct drm_format_info *drm_fmt = fb->format; ++ const struct vc_image_format *vc_fmt = ++ vc4_get_vc_image_fmt(drm_fmt->format); ++ int num_planes = fb->format->num_planes; ++ unsigned int rotation; ++ ++ mb->plane.vc_image_type = vc_fmt->vc_image; ++ mb->plane.width = fb->width; ++ mb->plane.height = fb->height; ++ mb->plane.pitch = fb->pitches[0]; ++ mb->plane.src_w = state->src_w; ++ mb->plane.src_h = state->src_h; ++ mb->plane.src_x = state->src_x; ++ mb->plane.src_y = state->src_y; ++ mb->plane.dst_w = state->crtc_w; ++ mb->plane.dst_h = state->crtc_h; ++ mb->plane.dst_x = state->crtc_x; ++ mb->plane.dst_y = state->crtc_y; ++ mb->plane.alpha = state->alpha >> 8; ++ mb->plane.layer = state->normalized_zpos ? ++ state->normalized_zpos : -127; ++ mb->plane.num_planes = num_planes; ++ mb->plane.is_vu = vc_fmt->is_vu; ++ mb->plane.planes[0] = bo->dma_addr + fb->offsets[0]; ++ ++ rotation = drm_rotation_simplify(state->rotation, ++ DRM_MODE_ROTATE_0 | ++ DRM_MODE_REFLECT_X | ++ DRM_MODE_REFLECT_Y); ++ ++ mb->plane.transform = TRANSFORM_NO_ROTATE; ++ if (rotation & DRM_MODE_REFLECT_X) ++ mb->plane.transform |= TRANSFORM_FLIP_HRIZ; ++ if (rotation & DRM_MODE_REFLECT_Y) ++ mb->plane.transform |= TRANSFORM_FLIP_VERT; ++ ++ vc4_fkms_margins_adj(state, &mb->plane); ++ ++ if (num_planes > 1) { ++ /* Assume this must be YUV */ ++ /* Makes assumptions on the stride for the chroma planes as we ++ * can't easily plumb in non-standard pitches. ++ */ ++ mb->plane.planes[1] = bo->dma_addr + fb->offsets[1]; ++ if (num_planes > 2) ++ mb->plane.planes[2] = bo->dma_addr + fb->offsets[2]; ++ else ++ mb->plane.planes[2] = 0; ++ ++ /* Special case the YUV420 with U and V as line interleaved ++ * planes as we have special handling for that case. ++ */ ++ if (num_planes == 3 && ++ (fb->offsets[2] - fb->offsets[1]) == fb->pitches[1]) ++ mb->plane.vc_image_type = VC_IMAGE_YUV420_S; ++ ++ switch (state->color_encoding) { ++ default: ++ case DRM_COLOR_YCBCR_BT601: ++ if (state->color_range == DRM_COLOR_YCBCR_LIMITED_RANGE) ++ mb->plane.color_encoding = ++ VC_IMAGE_YUVINFO_CSC_ITUR_BT601; ++ else ++ mb->plane.color_encoding = ++ VC_IMAGE_YUVINFO_CSC_JPEG_JFIF; ++ break; ++ case DRM_COLOR_YCBCR_BT709: ++ /* Currently no support for a full range BT709 */ ++ mb->plane.color_encoding = ++ VC_IMAGE_YUVINFO_CSC_ITUR_BT709; ++ break; ++ case DRM_COLOR_YCBCR_BT2020: ++ /* Currently no support for a full range BT2020 */ ++ mb->plane.color_encoding = ++ VC_IMAGE_YUVINFO_CSC_REC_2020; ++ break; ++ } ++ } else { ++ mb->plane.planes[1] = 0; ++ mb->plane.planes[2] = 0; ++ } ++ mb->plane.planes[3] = 0; ++ ++ switch (fourcc_mod_broadcom_mod(fb->modifier)) { ++ case DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED: ++ switch (mb->plane.vc_image_type) { ++ case VC_IMAGE_XRGB8888: ++ mb->plane.vc_image_type = VC_IMAGE_TF_RGBX32; ++ break; ++ case VC_IMAGE_ARGB8888: ++ mb->plane.vc_image_type = VC_IMAGE_TF_RGBA32; ++ break; ++ case VC_IMAGE_RGB565: ++ mb->plane.vc_image_type = VC_IMAGE_TF_RGB565; ++ break; ++ } ++ break; ++ case DRM_FORMAT_MOD_BROADCOM_SAND128: ++ switch (mb->plane.vc_image_type) { ++ case VC_IMAGE_YUV420SP: ++ mb->plane.vc_image_type = VC_IMAGE_YUV_UV; ++ break; ++ /* VC_IMAGE_YUV10COL could be included in here, but it is only ++ * valid as a SAND128 format, so the table at the top will have ++ * already set the correct format. ++ */ ++ } ++ /* Note that the column pitch is passed across in lines, not ++ * bytes. ++ */ ++ mb->plane.pitch = fourcc_mod_broadcom_param(fb->modifier); ++ break; ++ } ++ ++ DRM_DEBUG_ATOMIC("[PLANE:%d:%s] plane update %dx%d@%d +dst(%d,%d, %d,%d) +src(%d,%d, %d,%d) 0x%08x/%08x/%08x/%d, alpha %u zpos %u\n", ++ plane->base.id, plane->name, ++ mb->plane.width, ++ mb->plane.height, ++ mb->plane.vc_image_type, ++ state->crtc_x, ++ state->crtc_y, ++ state->crtc_w, ++ state->crtc_h, ++ mb->plane.src_x, ++ mb->plane.src_y, ++ mb->plane.src_w, ++ mb->plane.src_h, ++ mb->plane.planes[0], ++ mb->plane.planes[1], ++ mb->plane.planes[2], ++ fb->pitches[0], ++ state->alpha, ++ state->normalized_zpos); ++ ++ return 0; ++} ++ ++static int vc4_plane_atomic_check(struct drm_plane *plane, ++ struct drm_atomic_state *state) ++{ ++ struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, ++ plane); ++ struct vc4_fkms_plane *vc4_plane = to_vc4_fkms_plane(plane); ++ ++ if (!plane_enabled(new_plane_state)) ++ return 0; ++ ++ return vc4_plane_to_mb(plane, &vc4_plane->mb, new_plane_state); ++} ++ ++static void vc4_plane_atomic_async_update(struct drm_plane *plane, ++ struct drm_atomic_state *state) ++{ ++ struct drm_plane_state *new_plane_state = ++ drm_atomic_get_new_plane_state(state, plane); ++ ++ swap(plane->state->fb, new_plane_state->fb); ++ plane->state->crtc_x = new_plane_state->crtc_x; ++ plane->state->crtc_y = new_plane_state->crtc_y; ++ plane->state->crtc_w = new_plane_state->crtc_w; ++ plane->state->crtc_h = new_plane_state->crtc_h; ++ plane->state->src_x = new_plane_state->src_x; ++ plane->state->src_y = new_plane_state->src_y; ++ plane->state->src_w = new_plane_state->src_w; ++ plane->state->src_h = new_plane_state->src_h; ++ plane->state->alpha = new_plane_state->alpha; ++ plane->state->pixel_blend_mode = new_plane_state->pixel_blend_mode; ++ plane->state->rotation = new_plane_state->rotation; ++ plane->state->zpos = new_plane_state->zpos; ++ plane->state->normalized_zpos = new_plane_state->normalized_zpos; ++ plane->state->color_encoding = new_plane_state->color_encoding; ++ plane->state->color_range = new_plane_state->color_range; ++ plane->state->src = new_plane_state->src; ++ plane->state->dst = new_plane_state->dst; ++ plane->state->visible = new_plane_state->visible; ++ ++ vc4_plane_set_blank(plane, false); ++} ++ ++static int vc4_plane_atomic_async_check(struct drm_plane *plane, ++ struct drm_atomic_state *state) ++{ ++ struct drm_plane_state *new_plane_state = ++ drm_atomic_get_new_plane_state(state, plane); ++ int ret = -EINVAL; ++ ++ if (plane->type == 2 && ++ plane->state->fb && ++ new_plane_state->crtc->state->active) ++ ret = 0; ++ ++ return ret; ++} ++ ++/* Called during init to allocate the plane's atomic state. */ ++static void vc4_plane_reset(struct drm_plane *plane) ++{ ++ struct vc4_plane_state *vc4_state; ++ ++ WARN_ON(plane->state); ++ ++ vc4_state = kzalloc(sizeof(*vc4_state), GFP_KERNEL); ++ if (!vc4_state) ++ return; ++ ++ __drm_atomic_helper_plane_reset(plane, &vc4_state->base); ++} ++ ++static void vc4_plane_destroy(struct drm_plane *plane) ++{ ++ drm_plane_cleanup(plane); ++} ++ ++static bool vc4_fkms_format_mod_supported(struct drm_plane *plane, ++ uint32_t format, ++ uint64_t modifier) ++{ ++ /* Support T_TILING for RGB formats only. */ ++ switch (format) { ++ case DRM_FORMAT_XRGB8888: ++ case DRM_FORMAT_ARGB8888: ++ case DRM_FORMAT_RGB565: ++ switch (modifier) { ++ case DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED: ++ case DRM_FORMAT_MOD_LINEAR: ++ return true; ++ default: ++ return false; ++ } ++ case DRM_FORMAT_NV12: ++ switch (fourcc_mod_broadcom_mod(modifier)) { ++ case DRM_FORMAT_MOD_LINEAR: ++ case DRM_FORMAT_MOD_BROADCOM_SAND128: ++ return true; ++ default: ++ return false; ++ } ++ case DRM_FORMAT_P030: ++ switch (fourcc_mod_broadcom_mod(modifier)) { ++ case DRM_FORMAT_MOD_BROADCOM_SAND128: ++ return true; ++ default: ++ return false; ++ } ++ case DRM_FORMAT_NV21: ++ case DRM_FORMAT_RGB888: ++ case DRM_FORMAT_BGR888: ++ case DRM_FORMAT_YUV422: ++ case DRM_FORMAT_YUV420: ++ case DRM_FORMAT_YVU420: ++ default: ++ return (modifier == DRM_FORMAT_MOD_LINEAR); ++ } ++} ++ ++static struct drm_plane_state *vc4_plane_duplicate_state(struct drm_plane *plane) ++{ ++ struct vc4_plane_state *vc4_state; ++ ++ if (WARN_ON(!plane->state)) ++ return NULL; ++ ++ vc4_state = kzalloc(sizeof(*vc4_state), GFP_KERNEL); ++ if (!vc4_state) ++ return NULL; ++ ++ __drm_atomic_helper_plane_duplicate_state(plane, &vc4_state->base); ++ ++ return &vc4_state->base; ++} ++ ++static const struct drm_plane_funcs vc4_plane_funcs = { ++ .update_plane = drm_atomic_helper_update_plane, ++ .disable_plane = drm_atomic_helper_disable_plane, ++ .destroy = vc4_plane_destroy, ++ .set_property = NULL, ++ .reset = vc4_plane_reset, ++ .atomic_duplicate_state = vc4_plane_duplicate_state, ++ .atomic_destroy_state = drm_atomic_helper_plane_destroy_state, ++ .format_mod_supported = vc4_fkms_format_mod_supported, ++}; ++ ++static const struct drm_plane_helper_funcs vc4_plane_helper_funcs = { ++ .prepare_fb = drm_gem_plane_helper_prepare_fb, ++ .cleanup_fb = NULL, ++ .atomic_check = vc4_plane_atomic_check, ++ .atomic_update = vc4_plane_atomic_update, ++ .atomic_disable = vc4_plane_atomic_disable, ++ .atomic_async_check = vc4_plane_atomic_async_check, ++ .atomic_async_update = vc4_plane_atomic_async_update, ++}; ++ ++static struct drm_plane *vc4_fkms_plane_init(struct drm_device *dev, ++ enum drm_plane_type type, ++ u8 display_num, ++ u8 plane_id) ++{ ++ struct drm_plane *plane = NULL; ++ struct vc4_fkms_plane *vc4_plane; ++ u32 formats[ARRAY_SIZE(vc_image_formats)]; ++ unsigned int default_zpos = 0; ++ u32 num_formats = 0; ++ int ret = 0; ++ static const uint64_t modifiers[] = { ++ DRM_FORMAT_MOD_LINEAR, ++ /* VC4_T_TILED should come after linear, because we ++ * would prefer to scan out linear (less bus traffic). ++ */ ++ DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED, ++ DRM_FORMAT_MOD_BROADCOM_SAND128, ++ DRM_FORMAT_MOD_INVALID, ++ }; ++ int i; ++ ++ vc4_plane = devm_kzalloc(dev->dev, sizeof(*vc4_plane), ++ GFP_KERNEL); ++ if (!vc4_plane) { ++ ret = -ENOMEM; ++ goto fail; ++ } ++ ++ for (i = 0; i < ARRAY_SIZE(vc_image_formats); i++) ++ formats[num_formats++] = vc_image_formats[i].drm; ++ ++ plane = &vc4_plane->base; ++ ret = drm_universal_plane_init(dev, plane, 0, ++ &vc4_plane_funcs, ++ formats, num_formats, modifiers, ++ type, NULL); ++ ++ /* FIXME: Do we need to be checking return values from all these calls? ++ */ ++ drm_plane_helper_add(plane, &vc4_plane_helper_funcs); ++ ++ drm_plane_create_alpha_property(plane); ++ drm_plane_create_rotation_property(plane, DRM_MODE_ROTATE_0, ++ DRM_MODE_ROTATE_0 | ++ DRM_MODE_ROTATE_180 | ++ DRM_MODE_REFLECT_X | ++ DRM_MODE_REFLECT_Y); ++ drm_plane_create_color_properties(plane, ++ BIT(DRM_COLOR_YCBCR_BT601) | ++ BIT(DRM_COLOR_YCBCR_BT709) | ++ BIT(DRM_COLOR_YCBCR_BT2020), ++ BIT(DRM_COLOR_YCBCR_LIMITED_RANGE) | ++ BIT(DRM_COLOR_YCBCR_FULL_RANGE), ++ DRM_COLOR_YCBCR_BT709, ++ DRM_COLOR_YCBCR_LIMITED_RANGE); ++ ++ /* ++ * Default frame buffer setup is with FB on -127, and raspistill etc ++ * tend to drop overlays on layer 2. Cursor plane was on layer +127. ++ * ++ * For F-KMS the mailbox call allows for a s8. ++ * Remap zpos 0 to -127 for the background layer, but leave all the ++ * other layers as requested by KMS. ++ */ ++ switch (type) { ++ default: ++ case DRM_PLANE_TYPE_PRIMARY: ++ default_zpos = 0; ++ break; ++ case DRM_PLANE_TYPE_OVERLAY: ++ default_zpos = 1; ++ break; ++ case DRM_PLANE_TYPE_CURSOR: ++ default_zpos = 2; ++ break; ++ } ++ drm_plane_create_zpos_property(plane, default_zpos, 0, 127); ++ ++ /* Prepare the static elements of the mailbox structure */ ++ vc4_plane->mb.tag.tag = RPI_FIRMWARE_SET_PLANE; ++ vc4_plane->mb.tag.buf_size = sizeof(struct set_plane); ++ vc4_plane->mb.tag.req_resp_size = 0; ++ vc4_plane->mb.plane.display = display_num; ++ vc4_plane->mb.plane.plane_id = plane_id; ++ vc4_plane->mb.plane.layer = default_zpos ? default_zpos : -127; ++ ++ return plane; ++fail: ++ if (plane) ++ vc4_plane_destroy(plane); ++ ++ return ERR_PTR(ret); ++} ++ ++static void vc4_crtc_mode_set_nofb(struct drm_crtc *crtc) ++{ ++ struct drm_device *dev = crtc->dev; ++ struct vc4_dev *vc4 = to_vc4_dev(dev); ++ struct vc4_fkms_crtc *vc4_fkms_crtc = to_vc4_fkms_crtc(crtc); ++ struct drm_display_mode *mode = &crtc->state->adjusted_mode; ++ struct vc4_fkms_encoder *vc4_encoder = ++ to_vc4_fkms_encoder(vc4_fkms_crtc->encoder); ++ struct mailbox_set_mode mb = { ++ .tag1 = { RPI_FIRMWARE_SET_TIMING, ++ sizeof(struct set_timings), 0}, ++ }; ++ union hdmi_infoframe frame; ++ int ret; ++ ++ ret = drm_hdmi_avi_infoframe_from_display_mode(&frame.avi, vc4_fkms_crtc->connector, mode); ++ if (ret < 0) { ++ DRM_ERROR("couldn't fill AVI infoframe\n"); ++ return; ++ } ++ ++ DRM_DEBUG_KMS("Setting mode for display num %u mode name %s, clk %d, h(disp %d, start %d, end %d, total %d, skew %d) v(disp %d, start %d, end %d, total %d, scan %d), vrefresh %d, par %u, flags 0x%04x\n", ++ vc4_fkms_crtc->display_number, mode->name, mode->clock, ++ mode->hdisplay, mode->hsync_start, mode->hsync_end, ++ mode->htotal, mode->hskew, mode->vdisplay, ++ mode->vsync_start, mode->vsync_end, mode->vtotal, ++ mode->vscan, drm_mode_vrefresh(mode), ++ mode->picture_aspect_ratio, mode->flags); ++ mb.timings.display = vc4_fkms_crtc->display_number; ++ ++ mb.timings.clock = mode->clock; ++ mb.timings.hdisplay = mode->hdisplay; ++ mb.timings.hsync_start = mode->hsync_start; ++ mb.timings.hsync_end = mode->hsync_end; ++ mb.timings.htotal = mode->htotal; ++ mb.timings.hskew = mode->hskew; ++ mb.timings.vdisplay = mode->vdisplay; ++ mb.timings.vsync_start = mode->vsync_start; ++ mb.timings.vsync_end = mode->vsync_end; ++ mb.timings.vtotal = mode->vtotal; ++ mb.timings.vscan = mode->vscan; ++ mb.timings.vrefresh = drm_mode_vrefresh(mode); ++ mb.timings.flags = 0; ++ if (mode->flags & DRM_MODE_FLAG_PHSYNC) ++ mb.timings.flags |= TIMINGS_FLAGS_H_SYNC_POS; ++ if (mode->flags & DRM_MODE_FLAG_PVSYNC) ++ mb.timings.flags |= TIMINGS_FLAGS_V_SYNC_POS; ++ ++ switch (frame.avi.picture_aspect) { ++ default: ++ case HDMI_PICTURE_ASPECT_NONE: ++ mb.timings.flags |= TIMINGS_FLAGS_ASPECT_NONE; ++ break; ++ case HDMI_PICTURE_ASPECT_4_3: ++ mb.timings.flags |= TIMINGS_FLAGS_ASPECT_4_3; ++ break; ++ case HDMI_PICTURE_ASPECT_16_9: ++ mb.timings.flags |= TIMINGS_FLAGS_ASPECT_16_9; ++ break; ++ case HDMI_PICTURE_ASPECT_64_27: ++ mb.timings.flags |= TIMINGS_FLAGS_ASPECT_64_27; ++ break; ++ case HDMI_PICTURE_ASPECT_256_135: ++ mb.timings.flags |= TIMINGS_FLAGS_ASPECT_256_135; ++ break; ++ } ++ ++ if (mode->flags & DRM_MODE_FLAG_INTERLACE) ++ mb.timings.flags |= TIMINGS_FLAGS_INTERLACE; ++ if (mode->flags & DRM_MODE_FLAG_DBLCLK) ++ mb.timings.flags |= TIMINGS_FLAGS_DBL_CLK; ++ ++ mb.timings.video_id_code = frame.avi.video_code; ++ ++ if (!vc4_encoder->hdmi_monitor) { ++ mb.timings.flags |= TIMINGS_FLAGS_DVI; ++ } else { ++ struct vc4_fkms_connector_state *conn_state = ++ to_vc4_fkms_connector_state(vc4_fkms_crtc->connector->state); ++ ++ if (conn_state->broadcast_rgb == VC4_BROADCAST_RGB_AUTO) { ++ /* See CEA-861-E - 5.1 Default Encoding Parameters */ ++ if (drm_default_rgb_quant_range(mode) == ++ HDMI_QUANTIZATION_RANGE_LIMITED) ++ mb.timings.flags |= TIMINGS_FLAGS_RGB_LIMITED; ++ } else { ++ if (conn_state->broadcast_rgb == ++ VC4_BROADCAST_RGB_LIMITED) ++ mb.timings.flags |= TIMINGS_FLAGS_RGB_LIMITED; ++ ++ /* If not using the default range, then do not provide ++ * a VIC as the HDMI spec requires that we do not ++ * signal the opposite of the defined range in the AVI ++ * infoframe. ++ */ ++ if (!!(mb.timings.flags & TIMINGS_FLAGS_RGB_LIMITED) != ++ (drm_default_rgb_quant_range(mode) == ++ HDMI_QUANTIZATION_RANGE_LIMITED)) ++ mb.timings.video_id_code = 0; ++ } ++ } ++ ++ /* ++ * FIXME: To implement ++ * switch(mode->flag & DRM_MODE_FLAG_3D_MASK) { ++ * case DRM_MODE_FLAG_3D_NONE: ++ * case DRM_MODE_FLAG_3D_FRAME_PACKING: ++ * case DRM_MODE_FLAG_3D_FIELD_ALTERNATIVE: ++ * case DRM_MODE_FLAG_3D_LINE_ALTERNATIVE: ++ * case DRM_MODE_FLAG_3D_SIDE_BY_SIDE_FULL: ++ * case DRM_MODE_FLAG_3D_L_DEPTH: ++ * case DRM_MODE_FLAG_3D_L_DEPTH_GFX_GFX_DEPTH: ++ * case DRM_MODE_FLAG_3D_TOP_AND_BOTTOM: ++ * case DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF: ++ * } ++ */ ++ ++ ret = rpi_firmware_property_list(vc4->firmware, &mb, sizeof(mb)); ++} ++ ++static void vc4_crtc_disable(struct drm_crtc *crtc, ++ struct drm_atomic_state *state) ++{ ++ struct drm_device *dev = crtc->dev; ++ struct drm_plane *plane; ++ ++ DRM_DEBUG_KMS("[CRTC:%d] vblanks off.\n", ++ crtc->base.id); ++ drm_crtc_vblank_off(crtc); ++ ++ /* Always turn the planes off on CRTC disable. In DRM, planes ++ * are enabled/disabled through the update/disable hooks ++ * above, and the CRTC enable/disable independently controls ++ * whether anything scans out at all, but the firmware doesn't ++ * give us a CRTC-level control for that. ++ */ ++ ++ drm_atomic_crtc_for_each_plane(plane, crtc) ++ vc4_plane_atomic_disable(plane, state); ++ ++ /* ++ * Make sure we issue a vblank event after disabling the CRTC if ++ * someone was waiting it. ++ */ ++ if (crtc->state->event) { ++ unsigned long flags; ++ ++ spin_lock_irqsave(&dev->event_lock, flags); ++ drm_crtc_send_vblank_event(crtc, crtc->state->event); ++ crtc->state->event = NULL; ++ spin_unlock_irqrestore(&dev->event_lock, flags); ++ } ++} ++ ++static void vc4_crtc_consume_event(struct drm_crtc *crtc) ++{ ++ struct vc4_fkms_crtc *vc4_fkms_crtc = to_vc4_fkms_crtc(crtc); ++ struct drm_device *dev = crtc->dev; ++ unsigned long flags; ++ ++ if (!crtc->state->event) ++ return; ++ ++ crtc->state->event->pipe = drm_crtc_index(crtc); ++ ++ WARN_ON(drm_crtc_vblank_get(crtc) != 0); ++ ++ spin_lock_irqsave(&dev->event_lock, flags); ++ vc4_fkms_crtc->event = crtc->state->event; ++ crtc->state->event = NULL; ++ spin_unlock_irqrestore(&dev->event_lock, flags); ++} ++ ++static void vc4_crtc_enable(struct drm_crtc *crtc, ++ struct drm_atomic_state *state) ++{ ++ struct drm_plane *plane; ++ ++ DRM_DEBUG_KMS("[CRTC:%d] vblanks on.\n", ++ crtc->base.id); ++ drm_crtc_vblank_on(crtc); ++ vc4_crtc_consume_event(crtc); ++ ++ /* Unblank the planes (if they're supposed to be displayed). */ ++ drm_atomic_crtc_for_each_plane(plane, crtc) ++ if (plane->state->fb) ++ vc4_plane_set_blank(plane, plane->state->visible); ++} ++ ++static enum drm_mode_status ++vc4_crtc_mode_valid(struct drm_crtc *crtc, const struct drm_display_mode *mode) ++{ ++ struct vc4_fkms_crtc *vc4_fkms_crtc = to_vc4_fkms_crtc(crtc); ++ struct drm_device *dev = crtc->dev; ++ struct vc4_dev *vc4 = to_vc4_dev(dev); ++ struct vc4_fkms *fkms = vc4->fkms; ++ ++ /* Do not allow doublescan modes from user space */ ++ if (mode->flags & DRM_MODE_FLAG_DBLSCAN) { ++ DRM_DEBUG_KMS("[CRTC:%d] Doublescan mode rejected.\n", ++ crtc->base.id); ++ return MODE_NO_DBLESCAN; ++ } ++ ++ /* Disable refresh rates > defined threshold (default 85Hz) as limited ++ * gain from them ++ */ ++ if (drm_mode_vrefresh(mode) > fkms_max_refresh_rate) ++ return MODE_BAD_VVALUE; ++ ++ /* Limit the pixel clock based on the HDMI clock limits from the ++ * firmware ++ */ ++ switch (vc4_fkms_crtc->display_number) { ++ case 2: /* HDMI0 */ ++ if (fkms->cfg.max_pixel_clock[0] && ++ mode->clock > fkms->cfg.max_pixel_clock[0]) ++ return MODE_CLOCK_HIGH; ++ break; ++ case 7: /* HDMI1 */ ++ if (fkms->cfg.max_pixel_clock[1] && ++ mode->clock > fkms->cfg.max_pixel_clock[1]) ++ return MODE_CLOCK_HIGH; ++ break; ++ } ++ ++ /* Pi4 can't generate odd horizontal timings on HDMI, so reject modes ++ * that would set them. ++ */ ++ if (fkms->bcm2711 && ++ (vc4_fkms_crtc->display_number == 2 || vc4_fkms_crtc->display_number == 7) && ++ !(mode->flags & DRM_MODE_FLAG_DBLCLK) && ++ ((mode->hdisplay | /* active */ ++ (mode->hsync_start - mode->hdisplay) | /* front porch */ ++ (mode->hsync_end - mode->hsync_start) | /* sync pulse */ ++ (mode->htotal - mode->hsync_end)) & 1)) /* back porch */ { ++ DRM_DEBUG_KMS("[CRTC:%d] Odd timing rejected %u %u %u %u.\n", ++ crtc->base.id, mode->hdisplay, mode->hsync_start, ++ mode->hsync_end, mode->htotal); ++ return MODE_H_ILLEGAL; ++ } ++ ++ return MODE_OK; ++} ++ ++static int vc4_fkms_crtc_atomic_check(struct drm_crtc *crtc, ++ struct drm_atomic_state *state) ++{ ++ struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, ++ crtc); ++ struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(crtc_state); ++ struct drm_connector *conn; ++ struct drm_connector_state *conn_state; ++ int i; ++ ++ DRM_DEBUG_KMS("[CRTC:%d] crtc_atomic_check.\n", crtc->base.id); ++ ++ for_each_new_connector_in_state(crtc_state->state, conn, conn_state, i) { ++ if (conn_state->crtc != crtc) ++ continue; ++ ++ vc4_state->margins.left = conn_state->tv.margins.left; ++ vc4_state->margins.right = conn_state->tv.margins.right; ++ vc4_state->margins.top = conn_state->tv.margins.top; ++ vc4_state->margins.bottom = conn_state->tv.margins.bottom; ++ break; ++ } ++ return 0; ++} ++ ++static void vc4_crtc_atomic_flush(struct drm_crtc *crtc, ++ struct drm_atomic_state *state) ++{ ++ struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, ++ crtc); ++ ++ DRM_DEBUG_KMS("[CRTC:%d] crtc_atomic_flush.\n", ++ crtc->base.id); ++ if (crtc->state->active && old_state->active && crtc->state->event) ++ vc4_crtc_consume_event(crtc); ++} ++ ++static void vc4_crtc_handle_page_flip(struct vc4_fkms_crtc *vc4_fkms_crtc) ++{ ++ struct drm_crtc *crtc = &vc4_fkms_crtc->base; ++ struct drm_device *dev = crtc->dev; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&dev->event_lock, flags); ++ if (vc4_fkms_crtc->event) { ++ drm_crtc_send_vblank_event(crtc, vc4_fkms_crtc->event); ++ vc4_fkms_crtc->event = NULL; ++ drm_crtc_vblank_put(crtc); ++ } ++ spin_unlock_irqrestore(&dev->event_lock, flags); ++} ++ ++static irqreturn_t vc4_crtc_irq_handler(int irq, void *data) ++{ ++ struct vc4_fkms_crtc **crtc_list = data; ++ int i; ++ u32 stat = readl(crtc_list[0]->regs + SMICS); ++ irqreturn_t ret = IRQ_NONE; ++ u32 chan; ++ ++ if (stat & SMICS_INTERRUPTS) { ++ writel(0, crtc_list[0]->regs + SMICS); ++ ++ chan = readl(crtc_list[0]->regs + SMIDSW0); ++ ++ if ((chan & 0xFFFF0000) != SMI_NEW) { ++ /* Older firmware. Treat the one interrupt as vblank/ ++ * complete for all crtcs. ++ */ ++ for (i = 0; crtc_list[i]; i++) { ++ if (crtc_list[i]->vblank_enabled) ++ drm_crtc_handle_vblank(&crtc_list[i]->base); ++ vc4_crtc_handle_page_flip(crtc_list[i]); ++ } ++ } else { ++ if (chan & 1) { ++ writel(SMI_NEW, crtc_list[0]->regs + SMIDSW0); ++ if (crtc_list[0]->vblank_enabled) ++ drm_crtc_handle_vblank(&crtc_list[0]->base); ++ vc4_crtc_handle_page_flip(crtc_list[0]); ++ } ++ ++ if (crtc_list[1]) { ++ /* Check for the secondary display too */ ++ chan = readl(crtc_list[0]->regs + SMIDSW1); ++ ++ if (chan & 1) { ++ writel(SMI_NEW, crtc_list[0]->regs + SMIDSW1); ++ ++ if (crtc_list[1]->vblank_enabled) ++ drm_crtc_handle_vblank(&crtc_list[1]->base); ++ vc4_crtc_handle_page_flip(crtc_list[1]); ++ } ++ } ++ } ++ ++ ret = IRQ_HANDLED; ++ } ++ ++ return ret; ++} ++ ++static int vc4_fkms_page_flip(struct drm_crtc *crtc, ++ struct drm_framebuffer *fb, ++ struct drm_pending_vblank_event *event, ++ uint32_t flags, ++ struct drm_modeset_acquire_ctx *ctx) ++{ ++ if (flags & DRM_MODE_PAGE_FLIP_ASYNC) { ++ DRM_ERROR("Async flips aren't allowed\n"); ++ return -EINVAL; ++ } ++ ++ return drm_atomic_helper_page_flip(crtc, fb, event, flags, ctx); ++} ++ ++static struct drm_crtc_state * ++vc4_fkms_crtc_duplicate_state(struct drm_crtc *crtc) ++{ ++ struct vc4_crtc_state *vc4_state, *old_vc4_state; ++ ++ vc4_state = kzalloc(sizeof(*vc4_state), GFP_KERNEL); ++ if (!vc4_state) ++ return NULL; ++ ++ old_vc4_state = to_vc4_crtc_state(crtc->state); ++ vc4_state->margins = old_vc4_state->margins; ++ ++ __drm_atomic_helper_crtc_duplicate_state(crtc, &vc4_state->base); ++ return &vc4_state->base; ++} ++ ++static void ++vc4_fkms_crtc_reset(struct drm_crtc *crtc) ++{ ++ if (crtc->state) ++ __drm_atomic_helper_crtc_destroy_state(crtc->state); ++ ++ crtc->state = kzalloc(sizeof(*crtc->state), GFP_KERNEL); ++ if (crtc->state) ++ crtc->state->crtc = crtc; ++} ++ ++static int vc4_fkms_enable_vblank(struct drm_crtc *crtc) ++{ ++ struct vc4_fkms_crtc *vc4_fkms_crtc = to_vc4_fkms_crtc(crtc); ++ ++ DRM_DEBUG_KMS("[CRTC:%d] enable_vblank.\n", ++ crtc->base.id); ++ vc4_fkms_crtc->vblank_enabled = true; ++ ++ return 0; ++} ++ ++static void vc4_fkms_disable_vblank(struct drm_crtc *crtc) ++{ ++ struct vc4_fkms_crtc *vc4_fkms_crtc = to_vc4_fkms_crtc(crtc); ++ ++ DRM_DEBUG_KMS("[CRTC:%d] disable_vblank.\n", ++ crtc->base.id); ++ vc4_fkms_crtc->vblank_enabled = false; ++} ++ ++static const struct drm_crtc_funcs vc4_crtc_funcs = { ++ .set_config = drm_atomic_helper_set_config, ++ .destroy = drm_crtc_cleanup, ++ .page_flip = vc4_fkms_page_flip, ++ .set_property = NULL, ++ .cursor_set = NULL, /* handled by drm_mode_cursor_universal */ ++ .cursor_move = NULL, /* handled by drm_mode_cursor_universal */ ++ .reset = vc4_fkms_crtc_reset, ++ .atomic_duplicate_state = vc4_fkms_crtc_duplicate_state, ++ .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, ++ .enable_vblank = vc4_fkms_enable_vblank, ++ .disable_vblank = vc4_fkms_disable_vblank, ++}; ++ ++static const struct drm_crtc_helper_funcs vc4_crtc_helper_funcs = { ++ .mode_set_nofb = vc4_crtc_mode_set_nofb, ++ .mode_valid = vc4_crtc_mode_valid, ++ .atomic_check = vc4_fkms_crtc_atomic_check, ++ .atomic_flush = vc4_crtc_atomic_flush, ++ .atomic_enable = vc4_crtc_enable, ++ .atomic_disable = vc4_crtc_disable, ++}; ++ ++static const struct of_device_id vc4_firmware_kms_dt_match[] = { ++ { .compatible = "raspberrypi,rpi-firmware-kms" }, ++ { .compatible = "raspberrypi,rpi-firmware-kms-2711", ++ .data = (void *)1 }, ++ {} ++}; ++ ++static enum drm_connector_status ++vc4_fkms_connector_detect(struct drm_connector *connector, bool force) ++{ ++ DRM_DEBUG_KMS("connector detect.\n"); ++ return connector_status_connected; ++} ++ ++/* Queries the firmware to populate a drm_mode structure for this display */ ++static int vc4_fkms_get_fw_mode(struct vc4_fkms_connector *fkms_connector, ++ struct drm_display_mode *mode) ++{ ++ struct vc4_dev *vc4 = fkms_connector->vc4_dev; ++ struct set_timings timings = { 0 }; ++ int ret; ++ ++ timings.display = fkms_connector->display_number; ++ ++ ret = rpi_firmware_property(vc4->firmware, ++ RPI_FIRMWARE_GET_DISPLAY_TIMING, &timings, ++ sizeof(timings)); ++ if (ret || !timings.clock) ++ /* No mode returned - abort */ ++ return -1; ++ ++ /* Equivalent to DRM_MODE macro. */ ++ memset(mode, 0, sizeof(*mode)); ++ strncpy(mode->name, "FIXED_MODE", sizeof(mode->name)); ++ mode->status = 0; ++ mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; ++ mode->clock = timings.clock; ++ mode->hdisplay = timings.hdisplay; ++ mode->hsync_start = timings.hsync_start; ++ mode->hsync_end = timings.hsync_end; ++ mode->htotal = timings.htotal; ++ mode->hskew = 0; ++ mode->vdisplay = timings.vdisplay; ++ mode->vsync_start = timings.vsync_start; ++ mode->vsync_end = timings.vsync_end; ++ mode->vtotal = timings.vtotal; ++ mode->vscan = timings.vscan; ++ ++ if (timings.flags & TIMINGS_FLAGS_H_SYNC_POS) ++ mode->flags |= DRM_MODE_FLAG_PHSYNC; ++ else ++ mode->flags |= DRM_MODE_FLAG_NHSYNC; ++ ++ if (timings.flags & TIMINGS_FLAGS_V_SYNC_POS) ++ mode->flags |= DRM_MODE_FLAG_PVSYNC; ++ else ++ mode->flags |= DRM_MODE_FLAG_NVSYNC; ++ ++ if (timings.flags & TIMINGS_FLAGS_INTERLACE) ++ mode->flags |= DRM_MODE_FLAG_INTERLACE; ++ ++ return 0; ++} ++ ++static int vc4_fkms_get_edid_block(void *data, u8 *buf, unsigned int block, ++ size_t len) ++{ ++ struct vc4_fkms_connector *fkms_connector = ++ (struct vc4_fkms_connector *)data; ++ struct vc4_dev *vc4 = fkms_connector->vc4_dev; ++ struct mailbox_get_edid mb = { ++ .tag1 = { RPI_FIRMWARE_GET_EDID_BLOCK_DISPLAY, ++ 128 + 8, 0 }, ++ .block = block, ++ .display_number = fkms_connector->display_number, ++ }; ++ int ret = 0; ++ ++ ret = rpi_firmware_property_list(vc4->firmware, &mb, sizeof(mb)); ++ ++ if (!ret) ++ memcpy(buf, mb.edid, len); ++ ++ return ret; ++} ++ ++static int vc4_fkms_connector_get_modes(struct drm_connector *connector) ++{ ++ struct vc4_fkms_connector *fkms_connector = ++ to_vc4_fkms_connector(connector); ++ struct drm_encoder *encoder = fkms_connector->encoder; ++ struct vc4_fkms_encoder *vc4_encoder = to_vc4_fkms_encoder(encoder); ++ struct drm_display_mode fw_mode; ++ struct drm_display_mode *mode; ++ struct edid *edid; ++ int num_modes; ++ ++ if (!vc4_fkms_get_fw_mode(fkms_connector, &fw_mode)) { ++ drm_mode_debug_printmodeline(&fw_mode); ++ mode = drm_mode_duplicate(connector->dev, ++ &fw_mode); ++ drm_mode_probed_add(connector, mode); ++ num_modes = 1; /* 1 mode */ ++ } else { ++ edid = drm_do_get_edid(connector, vc4_fkms_get_edid_block, ++ fkms_connector); ++ ++ /* FIXME: Can we do CEC? ++ * cec_s_phys_addr_from_edid(vc4->hdmi->cec_adap, edid); ++ * if (!edid) ++ * return -ENODEV; ++ */ ++ ++ vc4_encoder->hdmi_monitor = drm_detect_hdmi_monitor(edid); ++ ++ drm_connector_update_edid_property(connector, edid); ++ num_modes = drm_add_edid_modes(connector, edid); ++ kfree(edid); ++ } ++ ++ return num_modes; ++} ++ ++/* This is the DSI panel resolution. Use this as a default should the firmware ++ * not respond to our request for the timings. ++ */ ++static const struct drm_display_mode lcd_mode = { ++ DRM_MODE("800x480", DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, ++ 25979400 / 1000, ++ 800, 800 + 1, 800 + 1 + 2, 800 + 1 + 2 + 46, 0, ++ 480, 480 + 7, 480 + 7 + 2, 480 + 7 + 2 + 21, 0, ++ 0) ++}; ++ ++static int vc4_fkms_lcd_connector_get_modes(struct drm_connector *connector) ++{ ++ struct vc4_fkms_connector *fkms_connector = ++ to_vc4_fkms_connector(connector); ++ struct drm_display_mode *mode; ++ struct drm_display_mode fw_mode; ++ ++ if (!vc4_fkms_get_fw_mode(fkms_connector, &fw_mode) && fw_mode.clock) ++ mode = drm_mode_duplicate(connector->dev, ++ &fw_mode); ++ else ++ mode = drm_mode_duplicate(connector->dev, ++ &lcd_mode); ++ ++ if (!mode) { ++ DRM_ERROR("Failed to create a new display mode\n"); ++ return -ENOMEM; ++ } ++ ++ drm_mode_probed_add(connector, mode); ++ ++ /* We have one mode */ ++ return 1; ++} ++ ++static struct drm_encoder * ++vc4_fkms_connector_best_encoder(struct drm_connector *connector) ++{ ++ struct vc4_fkms_connector *fkms_connector = ++ to_vc4_fkms_connector(connector); ++ DRM_DEBUG_KMS("best_connector.\n"); ++ return fkms_connector->encoder; ++} ++ ++static void vc4_fkms_connector_destroy(struct drm_connector *connector) ++{ ++ DRM_DEBUG_KMS("[CONNECTOR:%d] destroy.\n", ++ connector->base.id); ++ drm_connector_unregister(connector); ++ drm_connector_cleanup(connector); ++} ++ ++/** ++ * vc4_connector_duplicate_state - duplicate connector state ++ * @connector: digital connector ++ * ++ * Allocates and returns a copy of the connector state (both common and ++ * digital connector specific) for the specified connector. ++ * ++ * Returns: The newly allocated connector state, or NULL on failure. ++ */ ++struct drm_connector_state * ++vc4_connector_duplicate_state(struct drm_connector *connector) ++{ ++ struct vc4_fkms_connector_state *state; ++ ++ state = kmemdup(connector->state, sizeof(*state), GFP_KERNEL); ++ if (!state) ++ return NULL; ++ ++ __drm_atomic_helper_connector_duplicate_state(connector, &state->base); ++ return &state->base; ++} ++ ++/** ++ * vc4_connector_atomic_get_property - hook for connector->atomic_get_property. ++ * @connector: Connector to get the property for. ++ * @state: Connector state to retrieve the property from. ++ * @property: Property to retrieve. ++ * @val: Return value for the property. ++ * ++ * Returns the atomic property value for a digital connector. ++ */ ++int vc4_connector_atomic_get_property(struct drm_connector *connector, ++ const struct drm_connector_state *state, ++ struct drm_property *property, ++ uint64_t *val) ++{ ++ struct vc4_fkms_connector *fkms_connector = ++ to_vc4_fkms_connector(connector); ++ struct vc4_fkms_connector_state *vc4_conn_state = ++ to_vc4_fkms_connector_state(state); ++ ++ if (property == fkms_connector->broadcast_rgb_property) { ++ *val = vc4_conn_state->broadcast_rgb; ++ } else { ++ DRM_DEBUG_ATOMIC("Unknown property [PROP:%d:%s]\n", ++ property->base.id, property->name); ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++/** ++ * vc4_connector_atomic_set_property - hook for connector->atomic_set_property. ++ * @connector: Connector to set the property for. ++ * @state: Connector state to set the property on. ++ * @property: Property to set. ++ * @val: New value for the property. ++ * ++ * Sets the atomic property value for a digital connector. ++ */ ++int vc4_connector_atomic_set_property(struct drm_connector *connector, ++ struct drm_connector_state *state, ++ struct drm_property *property, ++ uint64_t val) ++{ ++ struct vc4_fkms_connector *fkms_connector = ++ to_vc4_fkms_connector(connector); ++ struct vc4_fkms_connector_state *vc4_conn_state = ++ to_vc4_fkms_connector_state(state); ++ ++ if (property == fkms_connector->broadcast_rgb_property) { ++ vc4_conn_state->broadcast_rgb = val; ++ return 0; ++ } ++ ++ DRM_DEBUG_ATOMIC("Unknown property [PROP:%d:%s]\n", ++ property->base.id, property->name); ++ return -EINVAL; ++} ++ ++int vc4_connector_atomic_check(struct drm_connector *connector, ++ struct drm_atomic_state *state) ++{ ++ struct drm_connector_state *old_state = ++ drm_atomic_get_old_connector_state(state, connector); ++ struct vc4_fkms_connector_state *vc4_old_state = ++ to_vc4_fkms_connector_state(old_state); ++ struct drm_connector_state *new_state = ++ drm_atomic_get_new_connector_state(state, connector); ++ struct vc4_fkms_connector_state *vc4_new_state = ++ to_vc4_fkms_connector_state(new_state); ++ struct drm_crtc *crtc = new_state->crtc; ++ ++ if (!crtc) ++ return 0; ++ ++ if (vc4_old_state->broadcast_rgb != vc4_new_state->broadcast_rgb) { ++ struct drm_crtc_state *crtc_state; ++ ++ crtc_state = drm_atomic_get_crtc_state(state, crtc); ++ if (IS_ERR(crtc_state)) ++ return PTR_ERR(crtc_state); ++ ++ crtc_state->mode_changed = true; ++ } ++ return 0; ++} ++ ++static void vc4_hdmi_connector_reset(struct drm_connector *connector) ++{ ++ drm_atomic_helper_connector_reset(connector); ++ drm_atomic_helper_connector_tv_margins_reset(connector); ++} ++ ++static const struct drm_connector_funcs vc4_fkms_connector_funcs = { ++ .detect = vc4_fkms_connector_detect, ++ .fill_modes = drm_helper_probe_single_connector_modes, ++ .destroy = vc4_fkms_connector_destroy, ++ .reset = vc4_hdmi_connector_reset, ++ .atomic_duplicate_state = vc4_connector_duplicate_state, ++ .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, ++ .atomic_get_property = vc4_connector_atomic_get_property, ++ .atomic_set_property = vc4_connector_atomic_set_property, ++}; ++ ++static const struct drm_connector_helper_funcs vc4_fkms_connector_helper_funcs = { ++ .get_modes = vc4_fkms_connector_get_modes, ++ .best_encoder = vc4_fkms_connector_best_encoder, ++ .atomic_check = vc4_connector_atomic_check, ++}; ++ ++static const struct drm_connector_helper_funcs vc4_fkms_lcd_conn_helper_funcs = { ++ .get_modes = vc4_fkms_lcd_connector_get_modes, ++ .best_encoder = vc4_fkms_connector_best_encoder, ++}; ++ ++static const struct drm_prop_enum_list broadcast_rgb_names[] = { ++ { VC4_BROADCAST_RGB_AUTO, "Automatic" }, ++ { VC4_BROADCAST_RGB_FULL, "Full" }, ++ { VC4_BROADCAST_RGB_LIMITED, "Limited 16:235" }, ++}; ++ ++static void ++vc4_attach_broadcast_rgb_property(struct vc4_fkms_connector *fkms_connector) ++{ ++ struct drm_device *dev = fkms_connector->base.dev; ++ struct drm_property *prop; ++ ++ prop = fkms_connector->broadcast_rgb_property; ++ if (!prop) { ++ prop = drm_property_create_enum(dev, DRM_MODE_PROP_ENUM, ++ "Broadcast RGB", ++ broadcast_rgb_names, ++ ARRAY_SIZE(broadcast_rgb_names)); ++ if (!prop) ++ return; ++ ++ fkms_connector->broadcast_rgb_property = prop; ++ } ++ ++ drm_object_attach_property(&fkms_connector->base.base, prop, 0); ++} ++ ++static struct drm_connector * ++vc4_fkms_connector_init(struct drm_device *dev, struct drm_encoder *encoder, ++ u32 display_num) ++{ ++ struct drm_connector *connector = NULL; ++ struct vc4_fkms_connector *fkms_connector; ++ struct vc4_fkms_connector_state *conn_state = NULL; ++ struct vc4_dev *vc4_dev = to_vc4_dev(dev); ++ int ret = 0; ++ ++ DRM_DEBUG_KMS("connector_init, display_num %u\n", display_num); ++ ++ fkms_connector = devm_kzalloc(dev->dev, sizeof(*fkms_connector), ++ GFP_KERNEL); ++ if (!fkms_connector) ++ return ERR_PTR(-ENOMEM); ++ ++ /* ++ * Allocate enough memory to hold vc4_fkms_connector_state, ++ */ ++ conn_state = kzalloc(sizeof(*conn_state), GFP_KERNEL); ++ if (!conn_state) { ++ kfree(fkms_connector); ++ return ERR_PTR(-ENOMEM); ++ } ++ ++ connector = &fkms_connector->base; ++ ++ fkms_connector->encoder = encoder; ++ fkms_connector->display_number = display_num; ++ fkms_connector->display_type = vc4_get_display_type(display_num); ++ fkms_connector->vc4_dev = vc4_dev; ++ ++ __drm_atomic_helper_connector_reset(connector, ++ &conn_state->base); ++ ++ if (fkms_connector->display_type == DRM_MODE_ENCODER_DSI) { ++ drm_connector_init(dev, connector, &vc4_fkms_connector_funcs, ++ DRM_MODE_CONNECTOR_DSI); ++ drm_connector_helper_add(connector, ++ &vc4_fkms_lcd_conn_helper_funcs); ++ connector->interlace_allowed = 0; ++ } else if (fkms_connector->display_type == DRM_MODE_ENCODER_TVDAC) { ++ drm_connector_init(dev, connector, &vc4_fkms_connector_funcs, ++ DRM_MODE_CONNECTOR_Composite); ++ drm_connector_helper_add(connector, ++ &vc4_fkms_lcd_conn_helper_funcs); ++ connector->interlace_allowed = 1; ++ } else { ++ drm_connector_init(dev, connector, &vc4_fkms_connector_funcs, ++ DRM_MODE_CONNECTOR_HDMIA); ++ drm_connector_helper_add(connector, ++ &vc4_fkms_connector_helper_funcs); ++ connector->interlace_allowed = 1; ++ } ++ ++ ret = drm_mode_create_tv_margin_properties(dev); ++ if (ret) ++ goto fail; ++ ++ drm_connector_attach_tv_margin_properties(connector); ++ ++ connector->polled = (DRM_CONNECTOR_POLL_CONNECT | ++ DRM_CONNECTOR_POLL_DISCONNECT); ++ ++ connector->doublescan_allowed = 0; ++ ++ vc4_attach_broadcast_rgb_property(fkms_connector); ++ ++ drm_connector_attach_encoder(connector, encoder); ++ ++ return connector; ++ ++ fail: ++ if (connector) ++ vc4_fkms_connector_destroy(connector); ++ ++ return ERR_PTR(ret); ++} ++ ++static void vc4_fkms_encoder_destroy(struct drm_encoder *encoder) ++{ ++ DRM_DEBUG_KMS("Encoder_destroy\n"); ++ drm_encoder_cleanup(encoder); ++} ++ ++static const struct drm_encoder_funcs vc4_fkms_encoder_funcs = { ++ .destroy = vc4_fkms_encoder_destroy, ++}; ++ ++static void vc4_fkms_display_power(struct drm_encoder *encoder, bool power) ++{ ++ struct vc4_fkms_encoder *vc4_encoder = to_vc4_fkms_encoder(encoder); ++ struct vc4_dev *vc4 = to_vc4_dev(encoder->dev); ++ ++ struct mailbox_display_pwr pwr = { ++ .tag1 = {RPI_FIRMWARE_SET_DISPLAY_POWER, 8, 0, }, ++ .display = vc4_encoder->display_num, ++ .state = power ? 1 : 0, ++ }; ++ ++ rpi_firmware_property_list(vc4->firmware, &pwr, sizeof(pwr)); ++} ++ ++static void vc4_fkms_encoder_enable(struct drm_encoder *encoder) ++{ ++ vc4_fkms_display_power(encoder, true); ++ DRM_DEBUG_KMS("Encoder_enable\n"); ++} ++ ++static void vc4_fkms_encoder_disable(struct drm_encoder *encoder) ++{ ++ vc4_fkms_display_power(encoder, false); ++ DRM_DEBUG_KMS("Encoder_disable\n"); ++} ++ ++static const struct drm_encoder_helper_funcs vc4_fkms_encoder_helper_funcs = { ++ .enable = vc4_fkms_encoder_enable, ++ .disable = vc4_fkms_encoder_disable, ++}; ++ ++static int vc4_fkms_create_screen(struct device *dev, struct drm_device *drm, ++ int display_idx, int display_ref, ++ struct vc4_fkms_crtc **ret_crtc) ++{ ++ struct vc4_dev *vc4 = to_vc4_dev(drm); ++ struct vc4_fkms_crtc *vc4_fkms_crtc; ++ struct vc4_fkms_encoder *vc4_encoder; ++ struct drm_crtc *crtc; ++ struct drm_plane *destroy_plane, *temp; ++ struct mailbox_blank_display blank = { ++ .tag1 = {RPI_FIRMWARE_FRAMEBUFFER_SET_DISPLAY_NUM, 4, 0, }, ++ .display = display_idx, ++ .tag2 = { RPI_FIRMWARE_FRAMEBUFFER_BLANK, 4, 0, }, ++ .blank = 1, ++ }; ++ struct drm_plane *planes[PLANES_PER_CRTC]; ++ int ret, i; ++ ++ vc4_fkms_crtc = devm_kzalloc(dev, sizeof(*vc4_fkms_crtc), GFP_KERNEL); ++ if (!vc4_fkms_crtc) ++ return -ENOMEM; ++ crtc = &vc4_fkms_crtc->base; ++ ++ vc4_fkms_crtc->display_number = display_ref; ++ vc4_fkms_crtc->display_type = vc4_get_display_type(display_ref); ++ ++ /* Blank the firmware provided framebuffer */ ++ rpi_firmware_property_list(vc4->firmware, &blank, sizeof(blank)); ++ ++ for (i = 0; i < PLANES_PER_CRTC; i++) { ++ planes[i] = vc4_fkms_plane_init(drm, ++ (i == 0) ? ++ DRM_PLANE_TYPE_PRIMARY : ++ (i == PLANES_PER_CRTC - 1) ? ++ DRM_PLANE_TYPE_CURSOR : ++ DRM_PLANE_TYPE_OVERLAY, ++ display_ref, ++ i + (display_idx * PLANES_PER_CRTC) ++ ); ++ if (IS_ERR(planes[i])) { ++ dev_err(dev, "failed to construct plane %u\n", i); ++ ret = PTR_ERR(planes[i]); ++ goto err; ++ } ++ } ++ ++ drm_crtc_init_with_planes(drm, crtc, planes[0], ++ planes[PLANES_PER_CRTC - 1], &vc4_crtc_funcs, ++ NULL); ++ drm_crtc_helper_add(crtc, &vc4_crtc_helper_funcs); ++ ++ /* Update the possible_crtcs mask for the overlay plane(s) */ ++ for (i = 1; i < (PLANES_PER_CRTC - 1); i++) ++ planes[i]->possible_crtcs = drm_crtc_mask(crtc); ++ ++ vc4_encoder = devm_kzalloc(dev, sizeof(*vc4_encoder), GFP_KERNEL); ++ if (!vc4_encoder) ++ return -ENOMEM; ++ vc4_fkms_crtc->encoder = &vc4_encoder->base; ++ ++ vc4_encoder->display_num = display_ref; ++ vc4_encoder->base.possible_crtcs |= drm_crtc_mask(crtc); ++ ++ drm_encoder_init(drm, &vc4_encoder->base, &vc4_fkms_encoder_funcs, ++ vc4_fkms_crtc->display_type, NULL); ++ drm_encoder_helper_add(&vc4_encoder->base, ++ &vc4_fkms_encoder_helper_funcs); ++ ++ vc4_fkms_crtc->connector = vc4_fkms_connector_init(drm, &vc4_encoder->base, ++ display_ref); ++ if (IS_ERR(vc4_fkms_crtc->connector)) { ++ ret = PTR_ERR(vc4_fkms_crtc->connector); ++ goto err_destroy_encoder; ++ } ++ ++ *ret_crtc = vc4_fkms_crtc; ++ ++ return 0; ++ ++err_destroy_encoder: ++ vc4_fkms_encoder_destroy(vc4_fkms_crtc->encoder); ++ list_for_each_entry_safe(destroy_plane, temp, ++ &drm->mode_config.plane_list, head) { ++ if (destroy_plane->possible_crtcs == 1 << drm_crtc_index(crtc)) ++ destroy_plane->funcs->destroy(destroy_plane); ++ } ++err: ++ return ret; ++} ++ ++static int vc4_fkms_bind(struct device *dev, struct device *master, void *data) ++{ ++ struct platform_device *pdev = to_platform_device(dev); ++ struct drm_device *drm = dev_get_drvdata(master); ++ struct vc4_dev *vc4 = to_vc4_dev(drm); ++ struct device_node *firmware_node; ++ const struct of_device_id *match; ++ struct vc4_fkms_crtc **crtc_list; ++ u32 num_displays, display_num; ++ struct vc4_fkms *fkms; ++ int ret; ++ u32 display_id; ++ ++ vc4->firmware_kms = true; ++ ++ fkms = devm_kzalloc(dev, sizeof(*fkms), GFP_KERNEL); ++ if (!fkms) ++ return -ENOMEM; ++ ++ match = of_match_device(vc4_firmware_kms_dt_match, dev); ++ if (!match) ++ return -ENODEV; ++ if (match->data) ++ fkms->bcm2711 = true; ++ ++ firmware_node = of_parse_phandle(dev->of_node, "brcm,firmware", 0); ++ vc4->firmware = devm_rpi_firmware_get(&pdev->dev, firmware_node); ++ if (!vc4->firmware) { ++ DRM_DEBUG("Failed to get Raspberry Pi firmware reference.\n"); ++ return -EPROBE_DEFER; ++ } ++ of_node_put(firmware_node); ++ ++ ret = rpi_firmware_property(vc4->firmware, ++ RPI_FIRMWARE_FRAMEBUFFER_GET_NUM_DISPLAYS, ++ &num_displays, sizeof(u32)); ++ ++ /* If we fail to get the number of displays, then ++ * assume old firmware that doesn't have the mailbox call, so just ++ * set one display ++ */ ++ if (ret) { ++ num_displays = 1; ++ DRM_WARN("Unable to determine number of displays - assuming 1\n"); ++ ret = 0; ++ } ++ ++ ret = rpi_firmware_property(vc4->firmware, ++ RPI_FIRMWARE_GET_DISPLAY_CFG, ++ &fkms->cfg, sizeof(fkms->cfg)); ++ ++ if (ret) ++ return -EINVAL; ++ /* The firmware works in Hz. This will be compared against kHz, so div ++ * 1000 now rather than multiple times later. ++ */ ++ fkms->cfg.max_pixel_clock[0] /= 1000; ++ fkms->cfg.max_pixel_clock[1] /= 1000; ++ ++ /* Allocate a list, with space for a NULL on the end */ ++ crtc_list = devm_kzalloc(dev, sizeof(crtc_list) * (num_displays + 1), ++ GFP_KERNEL); ++ if (!crtc_list) ++ return -ENOMEM; ++ ++ for (display_num = 0; display_num < num_displays; display_num++) { ++ display_id = display_num; ++ ret = rpi_firmware_property(vc4->firmware, ++ RPI_FIRMWARE_FRAMEBUFFER_GET_DISPLAY_ID, ++ &display_id, sizeof(display_id)); ++ /* FIXME: Determine the correct error handling here. ++ * Should we fail to create the one "screen" but keep the ++ * others, or fail the whole thing? ++ */ ++ if (ret) ++ DRM_ERROR("Failed to get display id %u\n", display_num); ++ ++ ret = vc4_fkms_create_screen(dev, drm, display_num, display_id, ++ &crtc_list[display_num]); ++ if (ret) ++ DRM_ERROR("Oh dear, failed to create display %u\n", ++ display_num); ++ } ++ ++ if (num_displays > 0) { ++ /* Map the SMI interrupt reg */ ++ crtc_list[0]->regs = vc4_ioremap_regs(pdev, 0); ++ if (IS_ERR(crtc_list[0]->regs)) ++ DRM_ERROR("Oh dear, failed to map registers\n"); ++ ++ writel(0, crtc_list[0]->regs + SMICS); ++ ret = devm_request_irq(dev, platform_get_irq(pdev, 0), ++ vc4_crtc_irq_handler, 0, ++ "vc4 firmware kms", crtc_list); ++ if (ret) ++ DRM_ERROR("Oh dear, failed to register IRQ\n"); ++ } else { ++ DRM_WARN("No displays found. Consider forcing hotplug if HDMI is attached\n"); ++ } ++ ++ vc4->fkms = fkms; ++ ++ platform_set_drvdata(pdev, crtc_list); ++ ++ return 0; ++} ++ ++static void vc4_fkms_unbind(struct device *dev, struct device *master, ++ void *data) ++{ ++ struct platform_device *pdev = to_platform_device(dev); ++ struct vc4_fkms_crtc **crtc_list = dev_get_drvdata(dev); ++ int i; ++ ++ for (i = 0; crtc_list[i]; i++) { ++ vc4_fkms_connector_destroy(crtc_list[i]->connector); ++ vc4_fkms_encoder_destroy(crtc_list[i]->encoder); ++ drm_crtc_cleanup(&crtc_list[i]->base); ++ } ++ ++ platform_set_drvdata(pdev, NULL); ++} ++ ++static const struct component_ops vc4_fkms_ops = { ++ .bind = vc4_fkms_bind, ++ .unbind = vc4_fkms_unbind, ++}; ++ ++static int vc4_fkms_probe(struct platform_device *pdev) ++{ ++ return component_add(&pdev->dev, &vc4_fkms_ops); ++} ++ ++static int vc4_fkms_remove(struct platform_device *pdev) ++{ ++ component_del(&pdev->dev, &vc4_fkms_ops); ++ return 0; ++} ++ ++struct platform_driver vc4_firmware_kms_driver = { ++ .probe = vc4_fkms_probe, ++ .remove = vc4_fkms_remove, ++ .driver = { ++ .name = "vc4_firmware_kms", ++ .of_match_table = vc4_firmware_kms_dt_match, ++ }, ++}; +--- a/drivers/gpu/drm/vc4/vc4_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_kms.c +@@ -138,6 +138,9 @@ vc4_ctm_commit(struct vc4_dev *vc4, stru + struct vc4_ctm_state *ctm_state = to_vc4_ctm_state(vc4->ctm_manager.state); + struct drm_color_ctm *ctm = ctm_state->ctm; + ++ if (vc4->firmware_kms) ++ return; ++ + if (ctm_state->fifo) { + HVS_WRITE(SCALER_OLEDCOEF2, + VC4_SET_FIELD(vc4_ctm_s31_32_to_s0_9(ctm->matrix[0]), +@@ -343,7 +346,7 @@ static void vc4_atomic_commit_tail(struc + for_each_new_crtc_in_state(state, crtc, new_crtc_state, i) { + struct vc4_crtc_state *vc4_crtc_state; + +- if (!new_crtc_state->commit) ++ if (!new_crtc_state->commit || vc4->firmware_kms) + continue; + + vc4_crtc_state = to_vc4_crtc_state(new_crtc_state); +@@ -369,7 +372,7 @@ static void vc4_atomic_commit_tail(struc + old_hvs_state->fifo_state[channel].pending_commit = NULL; + } + +- if (vc4->is_vc5) { ++ if (vc4->is_vc5 && !vc4->firmware_kms) { + unsigned long state_rate = max(old_hvs_state->core_clock_rate, + new_hvs_state->core_clock_rate); + unsigned long core_rate = clamp_t(unsigned long, state_rate, +@@ -388,10 +391,12 @@ static void vc4_atomic_commit_tail(struc + + vc4_ctm_commit(vc4, state); + +- if (vc4->is_vc5) +- vc5_hvs_pv_muxing_commit(vc4, state); +- else +- vc4_hvs_pv_muxing_commit(vc4, state); ++ if (!vc4->firmware_kms) { ++ if (vc4->is_vc5) ++ vc5_hvs_pv_muxing_commit(vc4, state); ++ else ++ vc4_hvs_pv_muxing_commit(vc4, state); ++ } + + drm_atomic_helper_commit_planes(dev, state, + DRM_PLANE_COMMIT_ACTIVE_ONLY); +@@ -406,7 +411,7 @@ static void vc4_atomic_commit_tail(struc + + drm_atomic_helper_cleanup_planes(dev, state); + +- if (vc4->is_vc5) { ++ if (vc4->is_vc5 && !vc4->firmware_kms) { + unsigned long core_rate = min_t(unsigned long, + hvs->max_core_rate, + new_hvs_state->core_clock_rate); +@@ -426,11 +431,21 @@ static void vc4_atomic_commit_tail(struc + + static int vc4_atomic_commit_setup(struct drm_atomic_state *state) + { ++ struct drm_device *dev = state->dev; ++ struct vc4_dev *vc4 = to_vc4_dev(dev); + struct drm_crtc_state *crtc_state; + struct vc4_hvs_state *hvs_state; + struct drm_crtc *crtc; + unsigned int i; + ++ /* We know for sure we don't want an async update here. Set ++ * state->legacy_cursor_update to false to prevent ++ * drm_atomic_helper_setup_commit() from auto-completing ++ * commit->flip_done. ++ */ ++ if (!vc4->firmware_kms) ++ state->legacy_cursor_update = false; ++ + hvs_state = vc4_hvs_get_new_global_state(state); + if (WARN_ON(IS_ERR(hvs_state))) + return PTR_ERR(hvs_state); +@@ -799,6 +814,7 @@ static int cmp_vc4_crtc_hvs_output(const + static int vc4_pv_muxing_atomic_check(struct drm_device *dev, + struct drm_atomic_state *state) + { ++ struct vc4_dev *vc4 = to_vc4_dev(state->dev); + struct vc4_hvs_state *hvs_new_state; + struct drm_crtc **sorted_crtcs; + struct drm_crtc *crtc; +@@ -806,6 +822,9 @@ static int vc4_pv_muxing_atomic_check(st + unsigned int i; + int ret; + ++ if (vc4->firmware_kms) ++ return 0; ++ + hvs_new_state = vc4_hvs_get_global_state(state); + if (IS_ERR(hvs_new_state)) + return PTR_ERR(hvs_new_state); +--- /dev/null ++++ b/drivers/gpu/drm/vc4/vc_image_types.h +@@ -0,0 +1,175 @@ ++ ++/* ++ * Copyright (c) 2012, Broadcom Europe Ltd ++ * ++ * Values taken from vc_image_types.h released by Broadcom at ++ * https://github.com/raspberrypi/userland/blob/master/interface/vctypes/vc_image_types.h ++ * and vc_image_structs.h at ++ * https://github.com/raspberrypi/userland/blob/master/interface/vctypes/vc_image_structs.h ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++enum { ++ VC_IMAGE_MIN = 0, //bounds for error checking ++ ++ VC_IMAGE_RGB565 = 1, ++ VC_IMAGE_1BPP, ++ VC_IMAGE_YUV420, ++ VC_IMAGE_48BPP, ++ VC_IMAGE_RGB888, ++ VC_IMAGE_8BPP, ++ /* 4bpp palettised image */ ++ VC_IMAGE_4BPP, ++ /* A separated format of 16 colour/light shorts followed by 16 z ++ * values ++ */ ++ VC_IMAGE_3D32, ++ /* 16 colours followed by 16 z values */ ++ VC_IMAGE_3D32B, ++ /* A separated format of 16 material/colour/light shorts followed by ++ * 16 z values ++ */ ++ VC_IMAGE_3D32MAT, ++ /* 32 bit format containing 18 bits of 6.6.6 RGB, 9 bits per short */ ++ VC_IMAGE_RGB2X9, ++ /* 32-bit format holding 18 bits of 6.6.6 RGB */ ++ VC_IMAGE_RGB666, ++ /* 4bpp palettised image with embedded palette */ ++ VC_IMAGE_PAL4_OBSOLETE, ++ /* 8bpp palettised image with embedded palette */ ++ VC_IMAGE_PAL8_OBSOLETE, ++ /* RGB888 with an alpha byte after each pixel */ ++ VC_IMAGE_RGBA32, ++ /* a line of Y (32-byte padded), a line of U (16-byte padded), and a ++ * line of V (16-byte padded) ++ */ ++ VC_IMAGE_YUV422, ++ /* RGB565 with a transparent patch */ ++ VC_IMAGE_RGBA565, ++ /* Compressed (4444) version of RGBA32 */ ++ VC_IMAGE_RGBA16, ++ /* VCIII codec format */ ++ VC_IMAGE_YUV_UV, ++ /* VCIII T-format RGBA8888 */ ++ VC_IMAGE_TF_RGBA32, ++ /* VCIII T-format RGBx8888 */ ++ VC_IMAGE_TF_RGBX32, ++ /* VCIII T-format float */ ++ VC_IMAGE_TF_FLOAT, ++ /* VCIII T-format RGBA4444 */ ++ VC_IMAGE_TF_RGBA16, ++ /* VCIII T-format RGB5551 */ ++ VC_IMAGE_TF_RGBA5551, ++ /* VCIII T-format RGB565 */ ++ VC_IMAGE_TF_RGB565, ++ /* VCIII T-format 8-bit luma and 8-bit alpha */ ++ VC_IMAGE_TF_YA88, ++ /* VCIII T-format 8 bit generic sample */ ++ VC_IMAGE_TF_BYTE, ++ /* VCIII T-format 8-bit palette */ ++ VC_IMAGE_TF_PAL8, ++ /* VCIII T-format 4-bit palette */ ++ VC_IMAGE_TF_PAL4, ++ /* VCIII T-format Ericsson Texture Compressed */ ++ VC_IMAGE_TF_ETC1, ++ /* RGB888 with R & B swapped */ ++ VC_IMAGE_BGR888, ++ /* RGB888 with R & B swapped, but with no pitch, i.e. no padding after ++ * each row of pixels ++ */ ++ VC_IMAGE_BGR888_NP, ++ /* Bayer image, extra defines which variant is being used */ ++ VC_IMAGE_BAYER, ++ /* General wrapper for codec images e.g. JPEG from camera */ ++ VC_IMAGE_CODEC, ++ /* VCIII codec format */ ++ VC_IMAGE_YUV_UV32, ++ /* VCIII T-format 8-bit luma */ ++ VC_IMAGE_TF_Y8, ++ /* VCIII T-format 8-bit alpha */ ++ VC_IMAGE_TF_A8, ++ /* VCIII T-format 16-bit generic sample */ ++ VC_IMAGE_TF_SHORT, ++ /* VCIII T-format 1bpp black/white */ ++ VC_IMAGE_TF_1BPP, ++ VC_IMAGE_OPENGL, ++ /* VCIII-B0 HVS YUV 4:4:4 interleaved samples */ ++ VC_IMAGE_YUV444I, ++ /* Y, U, & V planes separately (VC_IMAGE_YUV422 has them interleaved on ++ * a per line basis) ++ */ ++ VC_IMAGE_YUV422PLANAR, ++ /* 32bpp with 8bit alpha at MS byte, with R, G, B (LS byte) */ ++ VC_IMAGE_ARGB8888, ++ /* 32bpp with 8bit unused at MS byte, with R, G, B (LS byte) */ ++ VC_IMAGE_XRGB8888, ++ ++ /* interleaved 8 bit samples of Y, U, Y, V (4 flavours) */ ++ VC_IMAGE_YUV422YUYV, ++ VC_IMAGE_YUV422YVYU, ++ VC_IMAGE_YUV422UYVY, ++ VC_IMAGE_YUV422VYUY, ++ ++ /* 32bpp like RGBA32 but with unused alpha */ ++ VC_IMAGE_RGBX32, ++ /* 32bpp, corresponding to RGBA with unused alpha */ ++ VC_IMAGE_RGBX8888, ++ /* 32bpp, corresponding to BGRA with unused alpha */ ++ VC_IMAGE_BGRX8888, ++ ++ /* Y as a plane, then UV byte interleaved in plane with same pitch, ++ * half height ++ */ ++ VC_IMAGE_YUV420SP, ++ ++ /* Y, U, & V planes separately 4:4:4 */ ++ VC_IMAGE_YUV444PLANAR, ++ ++ /* T-format 8-bit U - same as TF_Y8 buf from U plane */ ++ VC_IMAGE_TF_U8, ++ /* T-format 8-bit U - same as TF_Y8 buf from V plane */ ++ VC_IMAGE_TF_V8, ++ ++ /* YUV4:2:0 planar, 16bit values */ ++ VC_IMAGE_YUV420_16, ++ /* YUV4:2:0 codec format, 16bit values */ ++ VC_IMAGE_YUV_UV_16, ++ /* YUV4:2:0 with U,V in side-by-side format */ ++ VC_IMAGE_YUV420_S, ++ /* 10-bit YUV 420 column image format */ ++ VC_IMAGE_YUV10COL, ++ /* 32-bpp, 10-bit R/G/B, 2-bit Alpha */ ++ VC_IMAGE_RGBA1010102, ++ ++ VC_IMAGE_MAX, /* bounds for error checking */ ++ VC_IMAGE_FORCE_ENUM_16BIT = 0xffff, ++}; ++ ++enum { ++ /* Unknown or unset - defaults to BT601 interstitial */ ++ VC_IMAGE_YUVINFO_UNSPECIFIED = 0, ++ ++ /* colour-space conversions data [4 bits] */ ++ ++ /* ITU-R BT.601-5 [SDTV] (compatible with VideoCore-II) */ ++ VC_IMAGE_YUVINFO_CSC_ITUR_BT601 = 1, ++ /* ITU-R BT.709-3 [HDTV] */ ++ VC_IMAGE_YUVINFO_CSC_ITUR_BT709 = 2, ++ /* JPEG JFIF */ ++ VC_IMAGE_YUVINFO_CSC_JPEG_JFIF = 3, ++ /* Title 47 Code of Federal Regulations (2003) 73.682 (a) (20) */ ++ VC_IMAGE_YUVINFO_CSC_FCC = 4, ++ /* Society of Motion Picture and Television Engineers 240M (1999) */ ++ VC_IMAGE_YUVINFO_CSC_SMPTE_240M = 5, ++ /* ITU-R BT.470-2 System M */ ++ VC_IMAGE_YUVINFO_CSC_ITUR_BT470_2_M = 6, ++ /* ITU-R BT.470-2 System B,G */ ++ VC_IMAGE_YUVINFO_CSC_ITUR_BT470_2_BG = 7, ++ /* JPEG JFIF, but with 16..255 luma */ ++ VC_IMAGE_YUVINFO_CSC_JPEG_JFIF_Y16_255 = 8, ++ /* Rec 2020 */ ++ VC_IMAGE_YUVINFO_CSC_REC_2020 = 9, ++}; diff --git a/target/linux/bcm27xx/patches-6.6/950-0008-drm-vc4-Add-support-for-gamma-on-BCM2711.patch b/target/linux/bcm27xx/patches-6.6/950-0008-drm-vc4-Add-support-for-gamma-on-BCM2711.patch new file mode 100644 index 0000000000..a4712310f2 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.6/950-0008-drm-vc4-Add-support-for-gamma-on-BCM2711.patch @@ -0,0 +1,276 @@ +From efed9f6403c125e56b9852b81f81632e85feb2eb Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 27 Apr 2021 14:24:21 +0200 +Subject: [PATCH 0008/1085] drm/vc4: Add support for gamma on BCM2711 + +BCM2711 changes from a 256 entry lookup table to a 16 point +piecewise linear function as the pipeline bitdepth has increased +to make a LUT unwieldy. + +Implement a simple conversion from a 256 entry LUT that userspace +is likely to expect to 16 evenly spread points in the PWL. This +could be improved with curve fitting at a later date. + +Co-developed-by: Juerg Haefliger +Signed-off-by: Juerg Haefliger +Signed-off-by: Dave Stevenson +Signed-off-by: Maxime Ripard +--- + drivers/gpu/drm/vc4/vc4_crtc.c | 35 ++++++++++--- + drivers/gpu/drm/vc4/vc4_drv.h | 28 +++++++++-- + drivers/gpu/drm/vc4/vc4_hvs.c | 89 ++++++++++++++++++++++++++++++++-- + drivers/gpu/drm/vc4/vc4_regs.h | 22 +++++++++ + 4 files changed, 162 insertions(+), 12 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_crtc.c ++++ b/drivers/gpu/drm/vc4/vc4_crtc.c +@@ -1340,19 +1340,42 @@ int __vc4_crtc_init(struct drm_device *d + + if (!vc4->is_vc5) { + drm_mode_crtc_set_gamma_size(crtc, ARRAY_SIZE(vc4_crtc->lut_r)); ++ } else { ++ /* This is a lie for hvs5 which uses a 16 point PWL, but it ++ * allows for something smarter than just 16 linearly spaced ++ * segments. Conversion is done in vc5_hvs_update_gamma_lut. ++ */ ++ drm_mode_crtc_set_gamma_size(crtc, 256); ++ } + +- drm_crtc_enable_color_mgmt(crtc, 0, false, crtc->gamma_size); ++ drm_crtc_enable_color_mgmt(crtc, 0, false, crtc->gamma_size); + ++ if (!vc4->is_vc5) { + /* We support CTM, but only for one CRTC at a time. It's therefore + * implemented as private driver state in vc4_kms, not here. + */ + drm_crtc_enable_color_mgmt(crtc, 0, true, crtc->gamma_size); +- } + +- for (i = 0; i < crtc->gamma_size; i++) { +- vc4_crtc->lut_r[i] = i; +- vc4_crtc->lut_g[i] = i; +- vc4_crtc->lut_b[i] = i; ++ /* Initialize the VC4 gamma LUTs */ ++ for (i = 0; i < crtc->gamma_size; i++) { ++ vc4_crtc->lut_r[i] = i; ++ vc4_crtc->lut_g[i] = i; ++ vc4_crtc->lut_b[i] = i; ++ } ++ } else { ++ /* Initialize the VC5 gamma PWL entries. Assume 12-bit pipeline, ++ * evenly spread over full range. ++ */ ++ for (i = 0; i < SCALER5_DSPGAMMA_NUM_POINTS; i++) { ++ vc4_crtc->pwl_r[i] = ++ VC5_HVS_SET_GAMMA_ENTRY(i << 8, i << 12, 1 << 8); ++ vc4_crtc->pwl_g[i] = ++ VC5_HVS_SET_GAMMA_ENTRY(i << 8, i << 12, 1 << 8); ++ vc4_crtc->pwl_b[i] = ++ VC5_HVS_SET_GAMMA_ENTRY(i << 8, i << 12, 1 << 8); ++ vc4_crtc->pwl_a[i] = ++ VC5_HVS_SET_GAMMA_ENTRY(i << 8, i << 12, 1 << 8); ++ } + } + + return 0; +--- a/drivers/gpu/drm/vc4/vc4_drv.h ++++ b/drivers/gpu/drm/vc4/vc4_drv.h +@@ -22,6 +22,7 @@ + #include + + #include "uapi/drm/vc4_drm.h" ++#include "vc4_regs.h" + + struct drm_device; + struct drm_gem_object; +@@ -494,6 +495,17 @@ struct drm_encoder *vc4_find_encoder_by_ + return NULL; + } + ++struct vc5_gamma_entry { ++ u32 x_c_terms; ++ u32 grad_term; ++}; ++ ++#define VC5_HVS_SET_GAMMA_ENTRY(x, c, g) (struct vc5_gamma_entry){ \ ++ .x_c_terms = VC4_SET_FIELD((x), SCALER5_DSPGAMMA_OFF_X) | \ ++ VC4_SET_FIELD((c), SCALER5_DSPGAMMA_OFF_C), \ ++ .grad_term = (g) \ ++} ++ + struct vc4_crtc_data { + const char *name; + +@@ -538,9 +550,19 @@ struct vc4_crtc { + /* Timestamp at start of vblank irq - unaffected by lock delays. */ + ktime_t t_vblank; + +- u8 lut_r[256]; +- u8 lut_g[256]; +- u8 lut_b[256]; ++ union { ++ struct { /* VC4 gamma LUT */ ++ u8 lut_r[256]; ++ u8 lut_g[256]; ++ u8 lut_b[256]; ++ }; ++ struct { /* VC5 gamma PWL entries */ ++ struct vc5_gamma_entry pwl_r[SCALER5_DSPGAMMA_NUM_POINTS]; ++ struct vc5_gamma_entry pwl_g[SCALER5_DSPGAMMA_NUM_POINTS]; ++ struct vc5_gamma_entry pwl_b[SCALER5_DSPGAMMA_NUM_POINTS]; ++ struct vc5_gamma_entry pwl_a[SCALER5_DSPGAMMA_NUM_POINTS]; ++ }; ++ }; + + struct drm_pending_vblank_event *event; + +--- a/drivers/gpu/drm/vc4/vc4_hvs.c ++++ b/drivers/gpu/drm/vc4/vc4_hvs.c +@@ -243,7 +243,8 @@ static void vc4_hvs_lut_load(struct vc4_ + static void vc4_hvs_update_gamma_lut(struct vc4_hvs *hvs, + struct vc4_crtc *vc4_crtc) + { +- struct drm_crtc_state *crtc_state = vc4_crtc->base.state; ++ struct drm_crtc *crtc = &vc4_crtc->base; ++ struct drm_crtc_state *crtc_state = crtc->state; + struct drm_color_lut *lut = crtc_state->gamma_lut->data; + u32 length = drm_color_lut_size(crtc_state->gamma_lut); + u32 i; +@@ -257,6 +258,81 @@ static void vc4_hvs_update_gamma_lut(str + vc4_hvs_lut_load(hvs, vc4_crtc); + } + ++static void vc5_hvs_write_gamma_entry(struct vc4_hvs *hvs, ++ u32 offset, ++ struct vc5_gamma_entry *gamma) ++{ ++ HVS_WRITE(offset, gamma->x_c_terms); ++ HVS_WRITE(offset + 4, gamma->grad_term); ++} ++ ++static void vc5_hvs_lut_load(struct vc4_hvs *hvs, ++ struct vc4_crtc *vc4_crtc) ++{ ++ struct drm_crtc *crtc = &vc4_crtc->base; ++ struct drm_crtc_state *crtc_state = crtc->state; ++ struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(crtc_state); ++ u32 i; ++ u32 offset = SCALER5_DSPGAMMA_START + ++ vc4_state->assigned_channel * SCALER5_DSPGAMMA_CHAN_OFFSET; ++ ++ for (i = 0; i < SCALER5_DSPGAMMA_NUM_POINTS; i++, offset += 8) ++ vc5_hvs_write_gamma_entry(hvs, offset, &vc4_crtc->pwl_r[i]); ++ for (i = 0; i < SCALER5_DSPGAMMA_NUM_POINTS; i++, offset += 8) ++ vc5_hvs_write_gamma_entry(hvs, offset, &vc4_crtc->pwl_g[i]); ++ for (i = 0; i < SCALER5_DSPGAMMA_NUM_POINTS; i++, offset += 8) ++ vc5_hvs_write_gamma_entry(hvs, offset, &vc4_crtc->pwl_b[i]); ++ ++ if (vc4_state->assigned_channel == 2) { ++ /* Alpha only valid on channel 2 */ ++ for (i = 0; i < SCALER5_DSPGAMMA_NUM_POINTS; i++, offset += 8) ++ vc5_hvs_write_gamma_entry(hvs, offset, &vc4_crtc->pwl_a[i]); ++ } ++} ++ ++static void vc5_hvs_update_gamma_lut(struct vc4_hvs *hvs, ++ struct vc4_crtc *vc4_crtc) ++{ ++ struct drm_crtc *crtc = &vc4_crtc->base; ++ struct drm_color_lut *lut = crtc->state->gamma_lut->data; ++ unsigned int step, i; ++ u32 start, end; ++ ++#define VC5_HVS_UPDATE_GAMMA_ENTRY_FROM_LUT(pwl, chan) \ ++ start = drm_color_lut_extract(lut[i * step].chan, 12); \ ++ end = drm_color_lut_extract(lut[(i + 1) * step - 1].chan, 12); \ ++ \ ++ /* Negative gradients not permitted by the hardware, so \ ++ * flatten such points out. \ ++ */ \ ++ if (end < start) \ ++ end = start; \ ++ \ ++ /* Assume 12bit pipeline. \ ++ * X evenly spread over full range (12 bit). \ ++ * C as U12.4 format. \ ++ * Gradient as U4.8 format. \ ++ */ \ ++ vc4_crtc->pwl[i] = \ ++ VC5_HVS_SET_GAMMA_ENTRY(i << 8, start << 4, \ ++ ((end - start) << 4) / (step - 1)) ++ ++ /* HVS5 has a 16 point piecewise linear function for each colour ++ * channel (including alpha on channel 2) on each display channel. ++ * ++ * Currently take a crude subsample of the gamma LUT, but this could ++ * be improved to implement curve fitting. ++ */ ++ step = crtc->gamma_size / SCALER5_DSPGAMMA_NUM_POINTS; ++ for (i = 0; i < SCALER5_DSPGAMMA_NUM_POINTS; i++) { ++ VC5_HVS_UPDATE_GAMMA_ENTRY_FROM_LUT(pwl_r, red); ++ VC5_HVS_UPDATE_GAMMA_ENTRY_FROM_LUT(pwl_g, green); ++ VC5_HVS_UPDATE_GAMMA_ENTRY_FROM_LUT(pwl_b, blue); ++ } ++ ++ vc5_hvs_lut_load(hvs, vc4_crtc); ++} ++ + u8 vc4_hvs_get_fifo_frame_count(struct vc4_hvs *hvs, unsigned int fifo) + { + struct drm_device *drm = &hvs->vc4->base; +@@ -400,7 +476,10 @@ static int vc4_hvs_init_channel(struct v + /* Reload the LUT, since the SRAMs would have been disabled if + * all CRTCs had SCALER_DISPBKGND_GAMMA unset at once. + */ +- vc4_hvs_lut_load(hvs, vc4_crtc); ++ if (!vc4->is_vc5) ++ vc4_hvs_lut_load(hvs, vc4_crtc); ++ else ++ vc5_hvs_lut_load(hvs, vc4_crtc); + + drm_dev_exit(idx); + +@@ -646,7 +725,11 @@ void vc4_hvs_atomic_flush(struct drm_crt + u32 dispbkgndx = HVS_READ(SCALER_DISPBKGNDX(channel)); + + if (crtc->state->gamma_lut) { +- vc4_hvs_update_gamma_lut(hvs, vc4_crtc); ++ if (!vc4->is_vc5) ++ vc4_hvs_update_gamma_lut(hvs, vc4_crtc); ++ else ++ vc5_hvs_update_gamma_lut(hvs, vc4_crtc); ++ + dispbkgndx |= SCALER_DISPBKGND_GAMMA; + } else { + /* Unsetting DISPBKGND_GAMMA skips the gamma lut step +--- a/drivers/gpu/drm/vc4/vc4_regs.h ++++ b/drivers/gpu/drm/vc4/vc4_regs.h +@@ -512,6 +512,28 @@ + #define SCALER_DLIST_START 0x00002000 + #define SCALER_DLIST_SIZE 0x00004000 + ++/* Gamma PWL for each channel. 16 points for each of 4 colour channels (alpha ++ * only on channel 2). 8 bytes per entry, offsets first, then gradient: ++ * Y = GRAD * X + C ++ * ++ * Values for X and C are left justified, and vary depending on the width of ++ * the HVS channel: ++ * 8-bit pipeline: X uses [31:24], C is U8.8 format, and GRAD is U4.8. ++ * 12-bit pipeline: X uses [31:20], C is U12.4 format, and GRAD is U4.8. ++ * ++ * The 3 HVS channels start at 0x400 offsets (ie chan 1 starts at 0x2400, and ++ * chan 2 at 0x2800). ++ */ ++#define SCALER5_DSPGAMMA_NUM_POINTS 16 ++#define SCALER5_DSPGAMMA_START 0x00002000 ++#define SCALER5_DSPGAMMA_CHAN_OFFSET 0x400 ++# define SCALER5_DSPGAMMA_OFF_X_MASK VC4_MASK(31, 20) ++# define SCALER5_DSPGAMMA_OFF_X_SHIFT 20 ++# define SCALER5_DSPGAMMA_OFF_C_MASK VC4_MASK(15, 0) ++# define SCALER5_DSPGAMMA_OFF_C_SHIFT 0 ++# define SCALER5_DSPGAMMA_GRAD_MASK VC4_MASK(11, 0) ++# define SCALER5_DSPGAMMA_GRAD_SHIFT 0 ++ + #define SCALER5_DLIST_START 0x00004000 + + # define VC4_HDMI_SW_RESET_FORMAT_DETECT BIT(1) diff --git a/target/linux/bcm27xx/patches-6.6/950-0009-drm-vc4-Add-debugfs-node-that-dumps-the-vc5-gamma-PW.patch b/target/linux/bcm27xx/patches-6.6/950-0009-drm-vc4-Add-debugfs-node-that-dumps-the-vc5-gamma-PW.patch new file mode 100644 index 0000000000..24d0cd90f6 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.6/950-0009-drm-vc4-Add-debugfs-node-that-dumps-the-vc5-gamma-PW.patch @@ -0,0 +1,122 @@ +From 3931aecb383046dab3f43a4530fe527f7c50a4d5 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 28 Apr 2021 12:32:10 +0200 +Subject: [PATCH 0009/1085] drm/vc4: Add debugfs node that dumps the vc5 gamma + PWL entries + +This helps with debugging the conversion from a 256 point gamma LUT to +16 point PWL entries as used by the BCM2711. + +Co-developed-by: Juerg Haefliger +Signed-off-by: Juerg Haefliger +Signed-off-by: Dave Stevenson +Signed-off-by: Maxime Ripard +--- + drivers/gpu/drm/vc4/vc4_hvs.c | 85 ++++++++++++++++++++++++++++++++++- + 1 file changed, 84 insertions(+), 1 deletion(-) + +--- a/drivers/gpu/drm/vc4/vc4_hvs.c ++++ b/drivers/gpu/drm/vc4/vc4_hvs.c +@@ -143,6 +143,85 @@ static int vc4_hvs_debugfs_dlist(struct + return 0; + } + ++static int vc5_hvs_debugfs_gamma(struct seq_file *m, void *data) ++{ ++ struct drm_info_node *node = m->private; ++ struct drm_device *dev = node->minor->dev; ++ struct vc4_dev *vc4 = to_vc4_dev(dev); ++ struct vc4_hvs *hvs = vc4->hvs; ++ struct drm_printer p = drm_seq_file_printer(m); ++ unsigned int i, chan; ++ u32 dispstat, dispbkgndx; ++ ++ for (chan = 0; chan < SCALER_CHANNELS_COUNT; chan++) { ++ u32 x_c, grad; ++ u32 offset = SCALER5_DSPGAMMA_START + ++ chan * SCALER5_DSPGAMMA_CHAN_OFFSET; ++ ++ dispstat = VC4_GET_FIELD(HVS_READ(SCALER_DISPSTATX(chan)), ++ SCALER_DISPSTATX_MODE); ++ if (dispstat == SCALER_DISPSTATX_MODE_DISABLED || ++ dispstat == SCALER_DISPSTATX_MODE_EOF) { ++ drm_printf(&p, "HVS channel %u: Channel disabled\n", chan); ++ continue; ++ } ++ ++ dispbkgndx = HVS_READ(SCALER_DISPBKGNDX(chan)); ++ if (!(dispbkgndx & SCALER_DISPBKGND_GAMMA)) { ++ drm_printf(&p, "HVS channel %u: Gamma disabled\n", chan); ++ continue; ++ } ++ ++ drm_printf(&p, "HVS channel %u:\n", chan); ++ drm_printf(&p, " red:\n"); ++ for (i = 0; i < SCALER5_DSPGAMMA_NUM_POINTS; i++, offset += 8) { ++ x_c = HVS_READ(offset); ++ grad = HVS_READ(offset + 4); ++ drm_printf(&p, " %08x %08x - x %u, c %u, grad %u\n", ++ x_c, grad, ++ VC4_GET_FIELD(x_c, SCALER5_DSPGAMMA_OFF_X), ++ VC4_GET_FIELD(x_c, SCALER5_DSPGAMMA_OFF_C), ++ grad); ++ } ++ drm_printf(&p, " green:\n"); ++ for (i = 0; i < SCALER5_DSPGAMMA_NUM_POINTS; i++, offset += 8) { ++ x_c = HVS_READ(offset); ++ grad = HVS_READ(offset + 4); ++ drm_printf(&p, " %08x %08x - x %u, c %u, grad %u\n", ++ x_c, grad, ++ VC4_GET_FIELD(x_c, SCALER5_DSPGAMMA_OFF_X), ++ VC4_GET_FIELD(x_c, SCALER5_DSPGAMMA_OFF_C), ++ grad); ++ } ++ drm_printf(&p, " blue:\n"); ++ for (i = 0; i < SCALER5_DSPGAMMA_NUM_POINTS; i++, offset += 8) { ++ x_c = HVS_READ(offset); ++ grad = HVS_READ(offset + 4); ++ drm_printf(&p, " %08x %08x - x %u, c %u, grad %u\n", ++ x_c, grad, ++ VC4_GET_FIELD(x_c, SCALER5_DSPGAMMA_OFF_X), ++ VC4_GET_FIELD(x_c, SCALER5_DSPGAMMA_OFF_C), ++ grad); ++ } ++ ++ /* Alpha only valid on channel 2 */ ++ if (chan != 2) ++ continue; ++ ++ drm_printf(&p, " alpha:\n"); ++ for (i = 0; i < SCALER5_DSPGAMMA_NUM_POINTS; i++, offset += 8) { ++ x_c = HVS_READ(offset); ++ grad = HVS_READ(offset + 4); ++ drm_printf(&p, " %08x %08x - x %u, c %u, grad %u\n", ++ x_c, grad, ++ VC4_GET_FIELD(x_c, SCALER5_DSPGAMMA_OFF_X), ++ VC4_GET_FIELD(x_c, SCALER5_DSPGAMMA_OFF_C), ++ grad); ++ } ++ } ++ return 0; ++} ++ + /* The filter kernel is composed of dwords each containing 3 9-bit + * signed integers packed next to each other. + */ +@@ -850,11 +929,15 @@ int vc4_hvs_debugfs_init(struct drm_mino + if (!vc4->hvs) + return -ENODEV; + +- if (!vc4->is_vc5) ++ if (!vc4->is_vc5) { + debugfs_create_bool("hvs_load_tracker", S_IRUGO | S_IWUSR, + minor->debugfs_root, + &vc4->load_tracker_enabled); + ++ drm_debugfs_add_file(drm, "hvs_gamma", vc5_hvs_debugfs_gamma, ++ NULL); ++ } ++ + drm_debugfs_add_file(drm, "hvs_dlists", vc4_hvs_debugfs_dlist, NULL); + + drm_debugfs_add_file(drm, "hvs_underrun", vc4_hvs_debugfs_underrun, NULL); diff --git a/target/linux/bcm27xx/patches-6.6/950-0010-drm-vc4-hvs-Force-modeset-on-gamma-lut-change.patch b/target/linux/bcm27xx/patches-6.6/950-0010-drm-vc4-hvs-Force-modeset-on-gamma-lut-change.patch new file mode 100644 index 0000000000..f49122dec2 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.6/950-0010-drm-vc4-hvs-Force-modeset-on-gamma-lut-change.patch @@ -0,0 +1,105 @@ +From 50a879cfdb87baad4edb50f7b443177a592998ed Mon Sep 17 00:00:00 2001 +From: Maxime Ripard +Date: Mon, 14 Jun 2021 15:28:30 +0200 +Subject: [PATCH 0010/1085] drm/vc4: hvs: Force modeset on gamma lut change + +The HVS Gamma block can only be updated when idle, so we need to disable +the HVS channel when the gamma property is set in an atomic commit. + +Since the pixelvalve cannot have its assigned channel halted without +stalling unless it's disabled as well, in our case that means forcing a +full disable / enable cycle on the pipeline. + +Signed-off-by: Maxime Ripard +--- + drivers/gpu/drm/vc4/vc4_crtc.c | 17 +++++++++++++++++ + drivers/gpu/drm/vc4/vc4_drv.h | 3 +++ + drivers/gpu/drm/vc4/vc4_hvs.c | 32 +++++++++++++++++++++++++++++++- + 3 files changed, 51 insertions(+), 1 deletion(-) + +--- a/drivers/gpu/drm/vc4/vc4_crtc.c ++++ b/drivers/gpu/drm/vc4/vc4_crtc.c +@@ -303,6 +303,23 @@ struct drm_encoder *vc4_get_crtc_encoder + return NULL; + } + ++#define drm_for_each_connector_mask(connector, dev, connector_mask) \ ++ list_for_each_entry((connector), &(dev)->mode_config.connector_list, head) \ ++ for_each_if ((connector_mask) & drm_connector_mask(connector)) ++ ++struct drm_connector *vc4_get_crtc_connector(struct drm_crtc *crtc, ++ struct drm_crtc_state *state) ++{ ++ struct drm_connector *connector; ++ ++ WARN_ON(hweight32(state->connector_mask) > 1); ++ ++ drm_for_each_connector_mask(connector, crtc->dev, state->connector_mask) ++ return connector; ++ ++ return NULL; ++} ++ + static void vc4_crtc_pixelvalve_reset(struct drm_crtc *crtc) + { + struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); +--- a/drivers/gpu/drm/vc4/vc4_drv.h ++++ b/drivers/gpu/drm/vc4/vc4_drv.h +@@ -613,6 +613,9 @@ vc4_crtc_to_vc4_pv_data(const struct vc4 + return container_of_const(data, struct vc4_pv_data, base); + } + ++struct drm_connector *vc4_get_crtc_connector(struct drm_crtc *crtc, ++ struct drm_crtc_state *state); ++ + struct drm_encoder *vc4_get_crtc_encoder(struct drm_crtc *crtc, + struct drm_crtc_state *state); + +--- a/drivers/gpu/drm/vc4/vc4_hvs.c ++++ b/drivers/gpu/drm/vc4/vc4_hvs.c +@@ -596,6 +596,36 @@ out: + drm_dev_exit(idx); + } + ++static int vc4_hvs_gamma_check(struct drm_crtc *crtc, ++ struct drm_atomic_state *state) ++{ ++ struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc); ++ struct drm_connector_state *conn_state; ++ struct drm_connector *connector; ++ struct drm_device *dev = crtc->dev; ++ struct vc4_dev *vc4 = to_vc4_dev(dev); ++ ++ if (!vc4->is_vc5) ++ return 0; ++ ++ if (!crtc_state->color_mgmt_changed) ++ return 0; ++ ++ connector = vc4_get_crtc_connector(crtc, crtc_state); ++ if (!connector) ++ return -EINVAL; ++ ++ if (!(connector->connector_type == DRM_MODE_CONNECTOR_HDMIA)) ++ return 0; ++ ++ conn_state = drm_atomic_get_connector_state(state, connector); ++ if (!conn_state) ++ return -EINVAL; ++ ++ crtc_state->mode_changed = true; ++ return 0; ++} ++ + int vc4_hvs_atomic_check(struct drm_crtc *crtc, struct drm_atomic_state *state) + { + struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc); +@@ -626,7 +656,7 @@ int vc4_hvs_atomic_check(struct drm_crtc + if (ret) + return ret; + +- return 0; ++ return vc4_hvs_gamma_check(crtc, state); + } + + static void vc4_hvs_install_dlist(struct drm_crtc *crtc) diff --git a/target/linux/bcm27xx/patches-6.6/950-0012-drm-vc4-Make-VEC-progressive-modes-readily-accessibl.patch b/target/linux/bcm27xx/patches-6.6/950-0012-drm-vc4-Make-VEC-progressive-modes-readily-accessibl.patch new file mode 100644 index 0000000000..0169ffee96 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.6/950-0012-drm-vc4-Make-VEC-progressive-modes-readily-accessibl.patch @@ -0,0 +1,68 @@ +From 2f04da8b66d1124c4cf9c1fd9733821801a01a5d Mon Sep 17 00:00:00 2001 +From: Mateusz Kwiatkowski +Date: Thu, 15 Jul 2021 01:08:11 +0200 +Subject: [PATCH 0012/1085] drm/vc4: Make VEC progressive modes readily + accessible + +Add predefined modelines for the 240p (NTSC) and 288p (PAL) progressive +modes, and report them through vc4_vec_connector_get_modes(). + +Signed-off-by: Mateusz Kwiatkowski +--- + drivers/gpu/drm/vc4/vc4_vec.c | 36 ++++++++++++++++++++++++++++++++++- + 1 file changed, 35 insertions(+), 1 deletion(-) + +--- a/drivers/gpu/drm/vc4/vc4_vec.c ++++ b/drivers/gpu/drm/vc4/vc4_vec.c +@@ -273,6 +273,18 @@ static const struct debugfs_reg32 vec_re + VC4_REG32(VEC_DAC_MISC), + }; + ++static const struct drm_display_mode drm_mode_240p = { ++ DRM_MODE("720x240", DRM_MODE_TYPE_DRIVER, 13500, ++ 720, 720 + 14, 720 + 14 + 64, 720 + 14 + 64 + 60, 0, ++ 240, 240 + 3, 240 + 3 + 3, 262, 0, 0) ++}; ++ ++static const struct drm_display_mode drm_mode_288p = { ++ DRM_MODE("720x288", DRM_MODE_TYPE_DRIVER, 13500, ++ 720, 720 + 20, 720 + 20 + 64, 720 + 20 + 64 + 60, 0, ++ 288, 288 + 2, 288 + 2 + 3, 312, 0, 0) ++}; ++ + static const struct vc4_vec_tv_mode vc4_vec_tv_modes[] = { + { + .mode = DRM_MODE_TV_MODE_NTSC, +@@ -507,9 +519,31 @@ static const struct drm_connector_funcs + .atomic_set_property = vc4_vec_connector_set_property, + }; + ++static int vc4_vec_connector_get_modes(struct drm_connector *connector) ++{ ++ struct drm_display_mode *mode; ++ int count = drm_connector_helper_tv_get_modes(connector); ++ ++ mode = drm_mode_duplicate(connector->dev, &drm_mode_240p); ++ if (!mode) ++ return -ENOMEM; ++ ++ drm_mode_probed_add(connector, mode); ++ count++; ++ ++ mode = drm_mode_duplicate(connector->dev, &drm_mode_288p); ++ if (!mode) ++ return -ENOMEM; ++ ++ drm_mode_probed_add(connector, mode); ++ count++; ++ ++ return count; ++} ++ + static const struct drm_connector_helper_funcs vc4_vec_connector_helper_funcs = { + .atomic_check = drm_atomic_helper_connector_tv_check, +- .get_modes = drm_connector_helper_tv_get_modes, ++ .get_modes = vc4_vec_connector_get_modes, + }; + + static int vc4_vec_connector_init(struct drm_device *dev, struct vc4_vec *vec) diff --git a/target/linux/bcm27xx/patches-6.6/950-0013-drm-Check-whether-the-gamma-lut-has-changed-before-u.patch b/target/linux/bcm27xx/patches-6.6/950-0013-drm-Check-whether-the-gamma-lut-has-changed-before-u.patch new file mode 100644 index 0000000000..a5307a1487 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.6/950-0013-drm-Check-whether-the-gamma-lut-has-changed-before-u.patch @@ -0,0 +1,30 @@ +From 8101479299dec8b984ee1cef2224d67c8ae9921f Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 2 Nov 2021 16:01:36 +0000 +Subject: [PATCH 0013/1085] drm: Check whether the gamma lut has changed before + updating + +drm_crtc_legacy_gamma_set updates the gamma_lut blob unconditionally, +which leads to unnecessary reprogramming of hardware. + +Check whether the blob contents has actually changed before +signalling that it has been updated. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/drm_color_mgmt.c | 4 +++- + 1 file changed, 3 insertions(+), 1 deletion(-) + +--- a/drivers/gpu/drm/drm_color_mgmt.c ++++ b/drivers/gpu/drm/drm_color_mgmt.c +@@ -330,7 +330,9 @@ static int drm_crtc_legacy_gamma_set(str + replaced = drm_property_replace_blob(&crtc_state->degamma_lut, + use_gamma_lut ? NULL : blob); + replaced |= drm_property_replace_blob(&crtc_state->ctm, NULL); +- replaced |= drm_property_replace_blob(&crtc_state->gamma_lut, ++ if (!crtc_state->gamma_lut || !crtc_state->gamma_lut->data || ++ memcmp(crtc_state->gamma_lut->data, blob_data, blob->length)) ++ replaced |= drm_property_replace_blob(&crtc_state->gamma_lut, + use_gamma_lut ? blob : NULL); + crtc_state->color_mgmt_changed |= replaced; + diff --git a/target/linux/bcm27xx/patches-6.6/950-0014-drm-vc4-Enable-gamma-block-only-when-required.patch b/target/linux/bcm27xx/patches-6.6/950-0014-drm-vc4-Enable-gamma-block-only-when-required.patch new file mode 100644 index 0000000000..76647cbd48 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.6/950-0014-drm-vc4-Enable-gamma-block-only-when-required.patch @@ -0,0 +1,66 @@ +From c0e4a6b67c9e9c1be98e9e83708b04ca7ed34989 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 8 Nov 2021 17:32:45 +0000 +Subject: [PATCH 0014/1085] drm/vc4: Enable gamma block only when required. + +With HVS5 the gamma block is now only reprogrammed with +a disable/enable. Loading the table from vc4_hvs_init_channel +(called from vc4_hvs_atomic_enable) appears to be at an +invalid point in time and so isn't applied. + +Switch to enabling and disabling the gamma table instead. This +isn't safe if the pipeline is running, but it isn't now. +For HVS4 it is safe to enable and disable dynamically, so +adopt that approach there too. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_hvs.c | 22 ++++++++++++++++------ + 1 file changed, 16 insertions(+), 6 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_hvs.c ++++ b/drivers/gpu/drm/vc4/vc4_hvs.c +@@ -548,8 +548,11 @@ static int vc4_hvs_init_channel(struct v + dispbkgndx &= ~SCALER_DISPBKGND_GAMMA; + dispbkgndx &= ~SCALER_DISPBKGND_INTERLACE; + ++ if (crtc->state->gamma_lut) ++ /* Enable gamma on if required */ ++ dispbkgndx |= SCALER_DISPBKGND_GAMMA; ++ + HVS_WRITE(SCALER_DISPBKGNDX(chan), dispbkgndx | +- ((!vc4->is_vc5) ? SCALER_DISPBKGND_GAMMA : 0) | + (interlace ? SCALER_DISPBKGND_INTERLACE : 0)); + + /* Reload the LUT, since the SRAMs would have been disabled if +@@ -834,18 +837,25 @@ void vc4_hvs_atomic_flush(struct drm_crt + u32 dispbkgndx = HVS_READ(SCALER_DISPBKGNDX(channel)); + + if (crtc->state->gamma_lut) { +- if (!vc4->is_vc5) ++ if (!vc4->is_vc5) { + vc4_hvs_update_gamma_lut(hvs, vc4_crtc); +- else ++ dispbkgndx |= SCALER_DISPBKGND_GAMMA; ++ } else { + vc5_hvs_update_gamma_lut(hvs, vc4_crtc); +- +- dispbkgndx |= SCALER_DISPBKGND_GAMMA; ++ } + } else { + /* Unsetting DISPBKGND_GAMMA skips the gamma lut step + * in hardware, which is the same as a linear lut that + * DRM expects us to use in absence of a user lut. ++ * ++ * Do NOT change state dynamically for hvs5 as it ++ * inserts a delay in the pipeline that will cause ++ * stalls if enabled/disabled whilst running. The other ++ * should already be disabling/enabling the pipeline ++ * when gamma changes. + */ +- dispbkgndx &= ~SCALER_DISPBKGND_GAMMA; ++ if (!vc4->is_vc5) ++ dispbkgndx &= ~SCALER_DISPBKGND_GAMMA; + } + HVS_WRITE(SCALER_DISPBKGNDX(channel), dispbkgndx); + } diff --git a/target/linux/bcm27xx/patches-6.6/950-0015-drm-vc4-Only-add-gamma-properties-once.patch b/target/linux/bcm27xx/patches-6.6/950-0015-drm-vc4-Only-add-gamma-properties-once.patch new file mode 100644 index 0000000000..bff05a6ff2 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.6/950-0015-drm-vc4-Only-add-gamma-properties-once.patch @@ -0,0 +1,26 @@ +From 57ec5c418588c6dd23a4ce7d0f0cb76667ec155f Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 8 Nov 2021 18:25:49 +0000 +Subject: [PATCH 0015/1085] drm/vc4: Only add gamma properties once. + +Two calls were made to drm_crtc_enable_color_mgmt to add gamma +and CTM, however they were both set to add the gamma properties, +so they ended up added twice. + +Fixes: 766cc6b1f7fc "drm/vc4: Add CTM support" +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_crtc.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/gpu/drm/vc4/vc4_crtc.c ++++ b/drivers/gpu/drm/vc4/vc4_crtc.c +@@ -1371,7 +1371,7 @@ int __vc4_crtc_init(struct drm_device *d + /* We support CTM, but only for one CRTC at a time. It's therefore + * implemented as private driver state in vc4_kms, not here. + */ +- drm_crtc_enable_color_mgmt(crtc, 0, true, crtc->gamma_size); ++ drm_crtc_enable_color_mgmt(crtc, 0, true, 0); + + /* Initialize the VC4 gamma LUTs */ + for (i = 0; i < crtc->gamma_size; i++) { diff --git a/target/linux/bcm27xx/patches-6.6/950-0016-drm-vc4-Validate-the-size-of-the-gamma_lut.patch b/target/linux/bcm27xx/patches-6.6/950-0016-drm-vc4-Validate-the-size-of-the-gamma_lut.patch new file mode 100644 index 0000000000..fd0823aa13 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.6/950-0016-drm-vc4-Validate-the-size-of-the-gamma_lut.patch @@ -0,0 +1,32 @@ +From 67157d16a97a0dc896d5a70245ba8f9f360112c8 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 10 Nov 2021 16:36:12 +0000 +Subject: [PATCH 0016/1085] drm/vc4: Validate the size of the gamma_lut + +Add a check to vc4_hvs_gamma_check to ensure a new non-empty +gamma LUT is of the correct length before accepting it. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_hvs.c | 10 ++++++++++ + 1 file changed, 10 insertions(+) + +--- a/drivers/gpu/drm/vc4/vc4_hvs.c ++++ b/drivers/gpu/drm/vc4/vc4_hvs.c +@@ -614,6 +614,16 @@ static int vc4_hvs_gamma_check(struct dr + if (!crtc_state->color_mgmt_changed) + return 0; + ++ if (crtc_state->gamma_lut) { ++ unsigned int len = drm_color_lut_size(crtc_state->gamma_lut); ++ ++ if (len != crtc->gamma_size) { ++ DRM_DEBUG_KMS("Invalid LUT size; got %u, expected %u\n", ++ len, crtc->gamma_size); ++ return -EINVAL; ++ } ++ } ++ + connector = vc4_get_crtc_connector(crtc, crtc_state); + if (!connector) + return -EINVAL; diff --git a/target/linux/bcm27xx/patches-6.6/950-0017-drm-vc4-Disable-Gamma-control-on-HVS5-due-to-issues-.patch b/target/linux/bcm27xx/patches-6.6/950-0017-drm-vc4-Disable-Gamma-control-on-HVS5-due-to-issues-.patch new file mode 100644 index 0000000000..2f432cb427 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.6/950-0017-drm-vc4-Disable-Gamma-control-on-HVS5-due-to-issues-.patch @@ -0,0 +1,36 @@ +From 1a8c3424507c67088915f2136edfba381c2fa4b9 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Thu, 13 Jan 2022 11:30:42 +0000 +Subject: [PATCH 0017/1085] drm/vc4: Disable Gamma control on HVS5 due to + issues writing the table + +Still under investigation, but the conditions under which the HVS +will accept values written to the gamma PWL are not straightforward. + +Disable gamma on HVS5 again until it can be resolved to avoid +gamma being enabled with an incorrect table. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_crtc.c | 8 +------- + 1 file changed, 1 insertion(+), 7 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_crtc.c ++++ b/drivers/gpu/drm/vc4/vc4_crtc.c +@@ -1357,15 +1357,9 @@ int __vc4_crtc_init(struct drm_device *d + + if (!vc4->is_vc5) { + drm_mode_crtc_set_gamma_size(crtc, ARRAY_SIZE(vc4_crtc->lut_r)); +- } else { +- /* This is a lie for hvs5 which uses a 16 point PWL, but it +- * allows for something smarter than just 16 linearly spaced +- * segments. Conversion is done in vc5_hvs_update_gamma_lut. +- */ +- drm_mode_crtc_set_gamma_size(crtc, 256); ++ drm_crtc_enable_color_mgmt(crtc, 0, false, crtc->gamma_size); + } + +- drm_crtc_enable_color_mgmt(crtc, 0, false, crtc->gamma_size); + + if (!vc4->is_vc5) { + /* We support CTM, but only for one CRTC at a time. It's therefore diff --git a/target/linux/bcm27xx/patches-6.6/950-0018-drm-dsi-Document-the-meaning-and-spec-references-for.patch b/target/linux/bcm27xx/patches-6.6/950-0018-drm-dsi-Document-the-meaning-and-spec-references-for.patch new file mode 100644 index 0000000000..6b785f6af1 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.6/950-0018-drm-dsi-Document-the-meaning-and-spec-references-for.patch @@ -0,0 +1,76 @@ +From cfd0ecb25ac9aecd0e6401d951a41988b7672776 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 17 Dec 2021 13:36:52 +0000 +Subject: [PATCH 0018/1085] drm/dsi: Document the meaning and spec references + for MIPI_DSI_MODE_* + +The MIPI_DSI_MODE_* flags have fairly terse descriptions and no reference +to the DSI specification as to their exact meaning. Usage has therefore +been rather fluid. + +Extend the descriptions and provide references to the part of the +MIPI DSI specification regarding what they mean. + +Signed-off-by: Dave Stevenson +--- + include/drm/drm_mipi_dsi.h | 38 ++++++++++++++++++++++++++------------ + 1 file changed, 26 insertions(+), 12 deletions(-) + +--- a/include/drm/drm_mipi_dsi.h ++++ b/include/drm/drm_mipi_dsi.h +@@ -113,29 +113,43 @@ struct mipi_dsi_host *of_find_mipi_dsi_h + + /* DSI mode flags */ + +-/* video mode */ ++/* Video mode display. ++ * Not set denotes a command mode display. ++ */ + #define MIPI_DSI_MODE_VIDEO BIT(0) +-/* video burst mode */ ++/* Video burst mode. ++ * Link frequency to be configured via platform configuration. ++ * This should always be set in conjunction with MIPI_DSI_MODE_VIDEO. ++ * (DSI spec V1.1 8.11.4) ++ */ + #define MIPI_DSI_MODE_VIDEO_BURST BIT(1) +-/* video pulse mode */ ++/* Video pulse mode. ++ * Not set denotes sync event mode. (DSI spec V1.1 8.11.2) ++ */ + #define MIPI_DSI_MODE_VIDEO_SYNC_PULSE BIT(2) +-/* enable auto vertical count mode */ ++/* Enable auto vertical count mode */ + #define MIPI_DSI_MODE_VIDEO_AUTO_VERT BIT(3) +-/* enable hsync-end packets in vsync-pulse and v-porch area */ ++/* Enable hsync-end packets in vsync-pulse and v-porch area */ + #define MIPI_DSI_MODE_VIDEO_HSE BIT(4) +-/* disable hfront-porch area */ ++/* Transmit NULL packets or LP mode during hfront-porch area. ++ * Not set denotes sending a blanking packet instead. (DSI spec V1.1 8.11.1) ++ */ + #define MIPI_DSI_MODE_VIDEO_NO_HFP BIT(5) +-/* disable hback-porch area */ ++/* Transmit NULL packets or LP mode during hback-porch area. ++ * Not set denotes sending a blanking packet instead. (DSI spec V1.1 8.11.1) ++ */ + #define MIPI_DSI_MODE_VIDEO_NO_HBP BIT(6) +-/* disable hsync-active area */ ++/* Transmit NULL packets or LP mode during hsync-active area. ++ * Not set denotes sending a blanking packet instead. (DSI spec V1.1 8.11.1) ++ */ + #define MIPI_DSI_MODE_VIDEO_NO_HSA BIT(7) +-/* flush display FIFO on vsync pulse */ ++/* Flush display FIFO on vsync pulse */ + #define MIPI_DSI_MODE_VSYNC_FLUSH BIT(8) +-/* disable EoT packets in HS mode */ ++/* Disable EoT packets in HS mode. (DSI spec V1.1 8.1) */ + #define MIPI_DSI_MODE_NO_EOT_PACKET BIT(9) +-/* device supports non-continuous clock behavior (DSI spec 5.6.1) */ ++/* Device supports non-continuous clock behavior (DSI spec V1.1 5.6.1) */ + #define MIPI_DSI_CLOCK_NON_CONTINUOUS BIT(10) +-/* transmit data in low power */ ++/* Transmit data in low power */ + #define MIPI_DSI_MODE_LPM BIT(11) + /* transmit data ending at the same time for all lanes within one hsync */ + #define MIPI_DSI_HS_PKT_END_ALIGNED BIT(12) diff --git a/target/linux/bcm27xx/patches-6.6/950-0019-drm-bridge-tc358762-Ignore-EPROBE_DEFER-when-logging.patch b/target/linux/bcm27xx/patches-6.6/950-0019-drm-bridge-tc358762-Ignore-EPROBE_DEFER-when-logging.patch new file mode 100644 index 0000000000..e02ab86177 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.6/950-0019-drm-bridge-tc358762-Ignore-EPROBE_DEFER-when-logging.patch @@ -0,0 +1,25 @@ +From 00e306d9dd4855b6a6da682b934bbc513e7cbcd5 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Thu, 20 Jan 2022 17:29:36 +0000 +Subject: [PATCH 0019/1085] drm/bridge: tc358762: Ignore EPROBE_DEFER when + logging errors + +mipi_dsi_attach can fail due to resources not being available +yet, therefore do not log error messages should they occur. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/bridge/tc358762.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/gpu/drm/bridge/tc358762.c ++++ b/drivers/gpu/drm/bridge/tc358762.c +@@ -294,7 +294,7 @@ static int tc358762_probe(struct mipi_ds + ret = mipi_dsi_attach(dsi); + if (ret < 0) { + drm_bridge_remove(&ctx->bridge); +- dev_err(dev, "failed to attach dsi\n"); ++ dev_err_probe(dev, ret, "failed to attach dsi\n"); + } + + return ret; diff --git a/target/linux/bcm27xx/patches-6.6/950-0020-vc4-drm-vc4_plane-Keep-fractional-source-coords-insi.patch b/target/linux/bcm27xx/patches-6.6/950-0020-vc4-drm-vc4_plane-Keep-fractional-source-coords-insi.patch new file mode 100644 index 0000000000..46a72e4ed9 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.6/950-0020-vc4-drm-vc4_plane-Keep-fractional-source-coords-insi.patch @@ -0,0 +1,212 @@ +From 1e18d70635d275e4c6a9ac63fa79a461ed50eac2 Mon Sep 17 00:00:00 2001 +From: Dom Cobley +Date: Mon, 14 Mar 2022 17:56:10 +0000 +Subject: [PATCH 0020/1085] vc4/drm: vc4_plane: Keep fractional source coords + inside state + +Signed-off-by: Dom Cobley +--- + drivers/gpu/drm/vc4/vc4_drv.h | 2 +- + drivers/gpu/drm/vc4/vc4_plane.c | 68 ++++++++++++++++----------------- + 2 files changed, 34 insertions(+), 36 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_drv.h ++++ b/drivers/gpu/drm/vc4/vc4_drv.h +@@ -408,7 +408,7 @@ struct vc4_plane_state { + + /* Clipped coordinates of the plane on the display. */ + int crtc_x, crtc_y, crtc_w, crtc_h; +- /* Clipped area being scanned from in the FB. */ ++ /* Clipped area being scanned from in the FB in u16.16 format */ + u32 src_x, src_y; + + u32 src_w[2], src_h[2]; +--- a/drivers/gpu/drm/vc4/vc4_plane.c ++++ b/drivers/gpu/drm/vc4/vc4_plane.c +@@ -251,9 +251,9 @@ static const struct hvs_format *vc4_get_ + + static enum vc4_scaling_mode vc4_get_scaling_mode(u32 src, u32 dst) + { +- if (dst == src) ++ if (dst == src >> 16) + return VC4_SCALING_NONE; +- if (3 * dst >= 2 * src) ++ if (3 * dst >= 2 * (src >> 16)) + return VC4_SCALING_PPF; + else + return VC4_SCALING_TPZ; +@@ -462,15 +462,10 @@ static int vc4_plane_setup_clipping_and_ + vc4_state->offsets[i] = bo->dma_addr + fb->offsets[i]; + } + +- /* +- * We don't support subpixel source positioning for scaling, +- * but fractional coordinates can be generated by clipping +- * so just round for now +- */ +- vc4_state->src_x = DIV_ROUND_CLOSEST(state->src.x1, 1 << 16); +- vc4_state->src_y = DIV_ROUND_CLOSEST(state->src.y1, 1 << 16); +- vc4_state->src_w[0] = DIV_ROUND_CLOSEST(state->src.x2, 1 << 16) - vc4_state->src_x; +- vc4_state->src_h[0] = DIV_ROUND_CLOSEST(state->src.y2, 1 << 16) - vc4_state->src_y; ++ vc4_state->src_x = state->src.x1; ++ vc4_state->src_y = state->src.y1; ++ vc4_state->src_w[0] = state->src.x2 - vc4_state->src_x; ++ vc4_state->src_h[0] = state->src.y2 - vc4_state->src_y; + + vc4_state->crtc_x = state->dst.x1; + vc4_state->crtc_y = state->dst.y1; +@@ -523,7 +518,7 @@ static void vc4_write_tpz(struct vc4_pla + { + u32 scale, recip; + +- scale = (1 << 16) * src / dst; ++ scale = src / dst; + + /* The specs note that while the reciprocal would be defined + * as (1<<32)/scale, ~0 is close enough. +@@ -569,7 +564,7 @@ static u32 vc4_lbm_size(struct drm_plane + if (vc4_state->x_scaling[0] == VC4_SCALING_TPZ) + pix_per_line = vc4_state->crtc_w; + else +- pix_per_line = vc4_state->src_w[0]; ++ pix_per_line = vc4_state->src_w[0] >> 16; + + if (!vc4_state->is_yuv) { + if (vc4_state->y_scaling[0] == VC4_SCALING_TPZ) +@@ -660,7 +655,8 @@ static void vc4_plane_calc_load(struct d + for (i = 0; i < fb->format->num_planes; i++) { + /* Even if the bandwidth/plane required for a single frame is + * +- * vc4_state->src_w[i] * vc4_state->src_h[i] * cpp * vrefresh ++ * (vc4_state->src_w[i] >> 16) * (vc4_state->src_h[i] >> 16) * ++ * cpp * vrefresh + * + * when downscaling, we have to read more pixels per line in + * the time frame reserved for a single line, so the bandwidth +@@ -669,11 +665,11 @@ static void vc4_plane_calc_load(struct d + * load by this number. We're likely over-estimating the read + * demand, but that's better than under-estimating it. + */ +- vscale_factor = DIV_ROUND_UP(vc4_state->src_h[i], ++ vscale_factor = DIV_ROUND_UP(vc4_state->src_h[i] >> 16, + vc4_state->crtc_h); +- vc4_state->membus_load += vc4_state->src_w[i] * +- vc4_state->src_h[i] * vscale_factor * +- fb->format->cpp[i]; ++ vc4_state->membus_load += (vc4_state->src_w[i] >> 16) * ++ (vc4_state->src_h[i] >> 16) * ++ vscale_factor * fb->format->cpp[i]; + vc4_state->hvs_load += vc4_state->crtc_h * vc4_state->crtc_w; + } + +@@ -826,7 +822,8 @@ static int vc4_plane_mode_set(struct drm + bool mix_plane_alpha; + bool covers_screen; + u32 scl0, scl1, pitch0; +- u32 tiling, src_y; ++ u32 tiling, src_x, src_y; ++ u32 width, height; + u32 hvs_format = format->hvs; + unsigned int rotation; + int ret, i; +@@ -838,6 +835,9 @@ static int vc4_plane_mode_set(struct drm + if (ret) + return ret; + ++ width = vc4_state->src_w[0] >> 16; ++ height = vc4_state->src_h[0] >> 16; ++ + /* SCL1 is used for Cb/Cr scaling of planar formats. For RGB + * and 4:4:4, scl1 should be set to scl0 so both channels of + * the scaler do the same thing. For YUV, the Y plane needs +@@ -858,9 +858,11 @@ static int vc4_plane_mode_set(struct drm + DRM_MODE_REFLECT_Y); + + /* We must point to the last line when Y reflection is enabled. */ +- src_y = vc4_state->src_y; ++ src_y = vc4_state->src_y >> 16; + if (rotation & DRM_MODE_REFLECT_Y) +- src_y += vc4_state->src_h[0] - 1; ++ src_y += height - 1; ++ ++ src_x = vc4_state->src_x >> 16; + + switch (base_format_mod) { + case DRM_FORMAT_MOD_LINEAR: +@@ -875,7 +877,7 @@ static int vc4_plane_mode_set(struct drm + (i ? v_subsample : 1) * + fb->pitches[i]; + +- vc4_state->offsets[i] += vc4_state->src_x / ++ vc4_state->offsets[i] += src_x / + (i ? h_subsample : 1) * + fb->format->cpp[i]; + } +@@ -898,7 +900,7 @@ static int vc4_plane_mode_set(struct drm + * pitch * tile_h == tile_size * tiles_per_row + */ + u32 tiles_w = fb->pitches[0] >> (tile_size_shift - tile_h_shift); +- u32 tiles_l = vc4_state->src_x >> tile_w_shift; ++ u32 tiles_l = src_x >> tile_w_shift; + u32 tiles_r = tiles_w - tiles_l; + u32 tiles_t = src_y >> tile_h_shift; + /* Intra-tile offsets, which modify the base address (the +@@ -908,7 +910,7 @@ static int vc4_plane_mode_set(struct drm + u32 tile_y = (src_y >> 4) & 1; + u32 subtile_y = (src_y >> 2) & 3; + u32 utile_y = src_y & 3; +- u32 x_off = vc4_state->src_x & tile_w_mask; ++ u32 x_off = src_x & tile_w_mask; + u32 y_off = src_y & tile_h_mask; + + /* When Y reflection is requested we must set the +@@ -1004,7 +1006,7 @@ static int vc4_plane_mode_set(struct drm + * of the 12-pixels in that 128-bit word is the + * first pixel to be used + */ +- u32 remaining_pixels = vc4_state->src_x % 96; ++ u32 remaining_pixels = src_x % 96; + u32 aligned = remaining_pixels / 12; + u32 last_bits = remaining_pixels % 12; + +@@ -1026,12 +1028,12 @@ static int vc4_plane_mode_set(struct drm + return -EINVAL; + } + pix_per_tile = tile_w / fb->format->cpp[0]; +- x_off = (vc4_state->src_x % pix_per_tile) / ++ x_off = (src_x % pix_per_tile) / + (i ? h_subsample : 1) * + fb->format->cpp[i]; + } + +- tile = vc4_state->src_x / pix_per_tile; ++ tile = src_x / pix_per_tile; + + vc4_state->offsets[i] += param * tile_w * tile; + vc4_state->offsets[i] += src_y / +@@ -1092,10 +1094,8 @@ static int vc4_plane_mode_set(struct drm + vc4_dlist_write(vc4_state, + (mix_plane_alpha ? SCALER_POS2_ALPHA_MIX : 0) | + vc4_hvs4_get_alpha_blend_mode(state) | +- VC4_SET_FIELD(vc4_state->src_w[0], +- SCALER_POS2_WIDTH) | +- VC4_SET_FIELD(vc4_state->src_h[0], +- SCALER_POS2_HEIGHT)); ++ VC4_SET_FIELD(width, SCALER_POS2_WIDTH) | ++ VC4_SET_FIELD(height, SCALER_POS2_HEIGHT)); + + /* Position Word 3: Context. Written by the HVS. */ + vc4_dlist_write(vc4_state, 0xc0c0c0c0); +@@ -1148,10 +1148,8 @@ static int vc4_plane_mode_set(struct drm + /* Position Word 2: Source Image Size */ + vc4_state->pos2_offset = vc4_state->dlist_count; + vc4_dlist_write(vc4_state, +- VC4_SET_FIELD(vc4_state->src_w[0], +- SCALER5_POS2_WIDTH) | +- VC4_SET_FIELD(vc4_state->src_h[0], +- SCALER5_POS2_HEIGHT)); ++ VC4_SET_FIELD(width, SCALER5_POS2_WIDTH) | ++ VC4_SET_FIELD(height, SCALER5_POS2_HEIGHT)); + + /* Position Word 3: Context. Written by the HVS. */ + vc4_dlist_write(vc4_state, 0xc0c0c0c0); diff --git a/target/linux/bcm27xx/patches-6.6/950-0021-vc4-drm-Handle-fractional-coordinates-using-the-phas.patch b/target/linux/bcm27xx/patches-6.6/950-0021-vc4-drm-Handle-fractional-coordinates-using-the-phas.patch new file mode 100644 index 0000000000..6b16937ade --- /dev/null +++ b/target/linux/bcm27xx/patches-6.6/950-0021-vc4-drm-Handle-fractional-coordinates-using-the-phas.patch @@ -0,0 +1,105 @@ +From 082526e9709190ec5e035266a33a7a4858ad7a79 Mon Sep 17 00:00:00 2001 +From: Dom Cobley +Date: Fri, 9 Apr 2021 15:00:40 +0100 +Subject: [PATCH 0021/1085] vc4/drm: Handle fractional coordinates using the + phase field + +Signed-off-by: Dom Cobley +--- + drivers/gpu/drm/vc4/vc4_plane.c | 61 ++++++++++++++++++++++++++++++--- + 1 file changed, 56 insertions(+), 5 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_plane.c ++++ b/drivers/gpu/drm/vc4/vc4_plane.c +@@ -532,14 +532,47 @@ static void vc4_write_tpz(struct vc4_pla + VC4_SET_FIELD(recip, SCALER_TPZ1_RECIP)); + } + +-static void vc4_write_ppf(struct vc4_plane_state *vc4_state, u32 src, u32 dst) ++/* phase magnitude bits */ ++#define PHASE_BITS 6 ++ ++static void vc4_write_ppf(struct vc4_plane_state *vc4_state, u32 src, u32 dst, u32 xy, int channel) + { +- u32 scale = (1 << 16) * src / dst; ++ u32 scale = src / dst; ++ s32 offset, offset2; ++ s32 phase; ++ ++ /* Start the phase at 1/2 pixel from the 1st pixel at src_x. ++ 1/4 pixel for YUV. */ ++ if (channel) { ++ /* the phase is relative to scale_src->x, so shift it for display list's x value */ ++ offset = (xy & 0x1ffff) >> (16 - PHASE_BITS) >> 1; ++ offset += -(1 << PHASE_BITS >> 2); ++ } else { ++ /* the phase is relative to scale_src->x, so shift it for display list's x value */ ++ offset = (xy & 0xffff) >> (16 - PHASE_BITS); ++ offset += -(1 << PHASE_BITS >> 1); ++ ++ /* This is a kludge to make sure the scaling factors are consitent with YUV's luma scaling. ++ we lose 1bit precision because of this. */ ++ scale &= ~1; ++ } ++ ++ /* There may be a also small error introduced by precision of scale. ++ Add half of that as a compromise */ ++ offset2 = src - dst * scale; ++ offset2 >>= 16 - PHASE_BITS; ++ phase = offset + (offset2 >> 1); ++ ++ /* Ensure +ve values don't touch the sign bit, then truncate negative values */ ++ if (phase >= 1 << PHASE_BITS) ++ phase = (1 << PHASE_BITS) - 1; ++ ++ phase &= SCALER_PPF_IPHASE_MASK; + + vc4_dlist_write(vc4_state, + SCALER_PPF_AGC | + VC4_SET_FIELD(scale, SCALER_PPF_SCALE) | +- VC4_SET_FIELD(0, SCALER_PPF_IPHASE)); ++ VC4_SET_FIELD(phase, SCALER_PPF_IPHASE)); + } + + static u32 vc4_lbm_size(struct drm_plane_state *state) +@@ -598,13 +631,13 @@ static void vc4_write_scaling_parameters + /* Ch0 H-PPF Word 0: Scaling Parameters */ + if (vc4_state->x_scaling[channel] == VC4_SCALING_PPF) { + vc4_write_ppf(vc4_state, +- vc4_state->src_w[channel], vc4_state->crtc_w); ++ vc4_state->src_w[channel], vc4_state->crtc_w, vc4_state->src_x, channel); + } + + /* Ch0 V-PPF Words 0-1: Scaling Parameters, Context */ + if (vc4_state->y_scaling[channel] == VC4_SCALING_PPF) { + vc4_write_ppf(vc4_state, +- vc4_state->src_h[channel], vc4_state->crtc_h); ++ vc4_state->src_h[channel], vc4_state->crtc_h, vc4_state->src_y, channel); + vc4_dlist_write(vc4_state, 0xc0c0c0c0); + } + +@@ -1052,6 +1085,24 @@ static int vc4_plane_mode_set(struct drm + return -EINVAL; + } + ++ /* fetch an extra pixel if we don't actually line up with the left edge. */ ++ if ((vc4_state->src_x & 0xffff) && vc4_state->src_x < (state->fb->width << 16)) ++ width++; ++ ++ /* same for the right side */ ++ if (((vc4_state->src_x + vc4_state->src_w[0]) & 0xffff) && ++ vc4_state->src_x + vc4_state->src_w[0] < (state->fb->width << 16)) ++ width++; ++ ++ /* now for the top */ ++ if ((vc4_state->src_y & 0xffff) && vc4_state->src_y < (state->fb->height << 16)) ++ height++; ++ ++ /* and the bottom */ ++ if (((vc4_state->src_y + vc4_state->src_h[0]) & 0xffff) && ++ vc4_state->src_y + vc4_state->src_h[0] < (state->fb->height << 16)) ++ height++; ++ + /* Don't waste cycles mixing with plane alpha if the set alpha + * is opaque or there is no per-pixel alpha information. + * In any case we use the alpha property value as the fixed alpha. diff --git a/target/linux/bcm27xx/patches-6.6/950-0022-drm-Add-chroma-siting-properties.patch b/target/linux/bcm27xx/patches-6.6/950-0022-drm-Add-chroma-siting-properties.patch new file mode 100644 index 0000000000..56c3b2b286 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.6/950-0022-drm-Add-chroma-siting-properties.patch @@ -0,0 +1,170 @@ +From ab6920df43e7b33afb5aa0552c61f8485e1a60da Mon Sep 17 00:00:00 2001 +From: Dom Cobley +Date: Wed, 26 Jan 2022 15:58:13 +0000 +Subject: [PATCH 0022/1085] drm: Add chroma siting properties + +Signed-off-by: Dom Cobley +--- + drivers/gpu/drm/drm_atomic_state_helper.c | 14 +++++++++ + drivers/gpu/drm/drm_atomic_uapi.c | 8 +++++ + drivers/gpu/drm/drm_color_mgmt.c | 36 +++++++++++++++++++++++ + include/drm/drm_color_mgmt.h | 3 ++ + include/drm/drm_plane.h | 36 +++++++++++++++++++++++ + 5 files changed, 97 insertions(+) + +--- a/drivers/gpu/drm/drm_atomic_state_helper.c ++++ b/drivers/gpu/drm/drm_atomic_state_helper.c +@@ -267,6 +267,20 @@ void __drm_atomic_helper_plane_state_res + plane_state->color_range = val; + } + ++ if (plane->chroma_siting_h_property) { ++ if (!drm_object_property_get_default_value(&plane->base, ++ plane->chroma_siting_h_property, ++ &val)) ++ plane_state->chroma_siting_h = val; ++ } ++ ++ if (plane->chroma_siting_v_property) { ++ if (!drm_object_property_get_default_value(&plane->base, ++ plane->chroma_siting_v_property, ++ &val)) ++ plane_state->chroma_siting_v = val; ++ } ++ + if (plane->zpos_property) { + if (!drm_object_property_get_default_value(&plane->base, + plane->zpos_property, +--- a/drivers/gpu/drm/drm_atomic_uapi.c ++++ b/drivers/gpu/drm/drm_atomic_uapi.c +@@ -580,6 +580,10 @@ static int drm_atomic_plane_set_property + state->color_encoding = val; + } else if (property == plane->color_range_property) { + state->color_range = val; ++ } else if (property == plane->chroma_siting_h_property) { ++ state->chroma_siting_h = val; ++ } else if (property == plane->chroma_siting_v_property) { ++ state->chroma_siting_v = val; + } else if (property == config->prop_fb_damage_clips) { + ret = drm_atomic_replace_property_blob_from_id(dev, + &state->fb_damage_clips, +@@ -646,6 +650,10 @@ drm_atomic_plane_get_property(struct drm + *val = state->color_encoding; + } else if (property == plane->color_range_property) { + *val = state->color_range; ++ } else if (property == plane->chroma_siting_h_property) { ++ *val = state->chroma_siting_h; ++ } else if (property == plane->chroma_siting_v_property) { ++ *val = state->chroma_siting_v; + } else if (property == config->prop_fb_damage_clips) { + *val = (state->fb_damage_clips) ? + state->fb_damage_clips->base.id : 0; +--- a/drivers/gpu/drm/drm_color_mgmt.c ++++ b/drivers/gpu/drm/drm_color_mgmt.c +@@ -591,6 +591,42 @@ int drm_plane_create_color_properties(st + EXPORT_SYMBOL(drm_plane_create_color_properties); + + /** ++ * drm_plane_create_chroma_siting_properties - chroma siting related plane properties ++ * @plane: plane object ++ * ++ * Create and attach plane specific CHROMA_SITING ++ * properties to @plane. ++ */ ++int drm_plane_create_chroma_siting_properties(struct drm_plane *plane, ++ int32_t default_chroma_siting_h, ++ int32_t default_chroma_siting_v) ++{ ++ struct drm_device *dev = plane->dev; ++ struct drm_property *prop; ++ ++ prop = drm_property_create_range(dev, 0, "CHROMA_SITING_H", ++ 0, 1<<16); ++ if (!prop) ++ return -ENOMEM; ++ plane->chroma_siting_h_property = prop; ++ drm_object_attach_property(&plane->base, prop, default_chroma_siting_h); ++ ++ prop = drm_property_create_range(dev, 0, "CHROMA_SITING_V", ++ 0, 1<<16); ++ if (!prop) ++ return -ENOMEM; ++ plane->chroma_siting_v_property = prop; ++ drm_object_attach_property(&plane->base, prop, default_chroma_siting_v); ++ ++ if (plane->state) { ++ plane->state->chroma_siting_h = default_chroma_siting_h; ++ plane->state->chroma_siting_v = default_chroma_siting_v; ++ } ++ return 0; ++} ++EXPORT_SYMBOL(drm_plane_create_chroma_siting_properties); ++ ++/** + * drm_color_lut_check - check validity of lookup table + * @lut: property blob containing LUT to check + * @tests: bitmask of tests to run +--- a/include/drm/drm_color_mgmt.h ++++ b/include/drm/drm_color_mgmt.h +@@ -94,6 +94,9 @@ int drm_plane_create_color_properties(st + enum drm_color_encoding default_encoding, + enum drm_color_range default_range); + ++int drm_plane_create_chroma_siting_properties(struct drm_plane *plane, ++ int32_t default_chroma_siting_h, int32_t default_chroma_siting_v); ++ + /** + * enum drm_color_lut_tests - hw-specific LUT tests to perform + * +--- a/include/drm/drm_plane.h ++++ b/include/drm/drm_plane.h +@@ -178,6 +178,24 @@ struct drm_plane_state { + enum drm_color_range color_range; + + /** ++ * @chroma_siting_h: ++ * ++ * Location of chroma samples horizontally compared to luma ++ * 0 means chroma is sited with left luma ++ * 0x8000 is interstitial. 0x10000 is sited with right luma ++ */ ++ int32_t chroma_siting_h; ++ ++ /** ++ * @chroma_siting_v: ++ * ++ * Location of chroma samples vertically compared to luma ++ * 0 means chroma is sited with top luma ++ * 0x8000 is interstitial. 0x10000 is sited with bottom luma ++ */ ++ int32_t chroma_siting_v; ++ ++ /** + * @fb_damage_clips: + * + * Blob representing damage (area in plane framebuffer that changed +@@ -758,6 +776,24 @@ struct drm_plane { + * scaling. + */ + struct drm_property *scaling_filter_property; ++ ++ /** ++ * @chroma_siting_h_property: ++ * ++ * Optional "CHROMA_SITING_H" property for specifying ++ * chroma siting for YUV formats. ++ * See drm_plane_create_chroma_siting_properties(). ++ */ ++ struct drm_property *chroma_siting_h_property; ++ ++ /** ++ * @chroma_siting_v_property: ++ * ++ * Optional "CHROMA_SITING_V" property for specifying ++ * chroma siting for YUV formats. ++ * See drm_plane_create_chroma_siting_properties(). ++ */ ++ struct drm_property *chroma_siting_v_property; + }; + + #define obj_to_plane(x) container_of(x, struct drm_plane, base) diff --git a/target/linux/bcm27xx/patches-6.6/950-0023-vc4-drm-plane-Make-use-of-chroma-siting-parameter.patch b/target/linux/bcm27xx/patches-6.6/950-0023-vc4-drm-plane-Make-use-of-chroma-siting-parameter.patch new file mode 100644 index 0000000000..774ee39a61 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.6/950-0023-vc4-drm-plane-Make-use-of-chroma-siting-parameter.patch @@ -0,0 +1,60 @@ +From 58d65d7d1c7b86291acaddea1606d884d5736ff0 Mon Sep 17 00:00:00 2001 +From: Dom Cobley +Date: Thu, 27 Jan 2022 15:32:04 +0000 +Subject: [PATCH 0023/1085] vc4/drm:plane: Make use of chroma siting parameter + +Signed-off-by: Dom Cobley +--- + drivers/gpu/drm/vc4/vc4_plane.c | 13 +++++++++---- + 1 file changed, 9 insertions(+), 4 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_plane.c ++++ b/drivers/gpu/drm/vc4/vc4_plane.c +@@ -535,17 +535,18 @@ static void vc4_write_tpz(struct vc4_pla + /* phase magnitude bits */ + #define PHASE_BITS 6 + +-static void vc4_write_ppf(struct vc4_plane_state *vc4_state, u32 src, u32 dst, u32 xy, int channel) ++static void vc4_write_ppf(struct vc4_plane_state *vc4_state, u32 src, u32 dst, u32 xy, int channel, int chroma_offset) + { + u32 scale = src / dst; + s32 offset, offset2; + s32 phase; + + /* Start the phase at 1/2 pixel from the 1st pixel at src_x. +- 1/4 pixel for YUV. */ ++ 1/4 pixel for YUV, plus the offset for chroma siting */ + if (channel) { + /* the phase is relative to scale_src->x, so shift it for display list's x value */ + offset = (xy & 0x1ffff) >> (16 - PHASE_BITS) >> 1; ++ offset -= chroma_offset >> (17 - PHASE_BITS); + offset += -(1 << PHASE_BITS >> 2); + } else { + /* the phase is relative to scale_src->x, so shift it for display list's x value */ +@@ -631,13 +632,15 @@ static void vc4_write_scaling_parameters + /* Ch0 H-PPF Word 0: Scaling Parameters */ + if (vc4_state->x_scaling[channel] == VC4_SCALING_PPF) { + vc4_write_ppf(vc4_state, +- vc4_state->src_w[channel], vc4_state->crtc_w, vc4_state->src_x, channel); ++ vc4_state->src_w[channel], vc4_state->crtc_w, vc4_state->src_x, channel, ++ state->chroma_siting_h); + } + + /* Ch0 V-PPF Words 0-1: Scaling Parameters, Context */ + if (vc4_state->y_scaling[channel] == VC4_SCALING_PPF) { + vc4_write_ppf(vc4_state, +- vc4_state->src_h[channel], vc4_state->crtc_h, vc4_state->src_y, channel); ++ vc4_state->src_h[channel], vc4_state->crtc_h, vc4_state->src_y, channel, ++ state->chroma_siting_v); + vc4_dlist_write(vc4_state, 0xc0c0c0c0); + } + +@@ -1718,6 +1721,8 @@ struct drm_plane *vc4_plane_init(struct + DRM_COLOR_YCBCR_BT709, + DRM_COLOR_YCBCR_LIMITED_RANGE); + ++ drm_plane_create_chroma_siting_properties(plane, 0, 0); ++ + if (type == DRM_PLANE_TYPE_PRIMARY) + drm_plane_create_zpos_immutable_property(plane, 0); + diff --git a/target/linux/bcm27xx/patches-6.6/950-0024-drm-vc4-Force-trigger-of-dlist-update-on-margins-cha.patch b/target/linux/bcm27xx/patches-6.6/950-0024-drm-vc4-Force-trigger-of-dlist-update-on-margins-cha.patch new file mode 100644 index 0000000000..9779cd512c --- /dev/null +++ b/target/linux/bcm27xx/patches-6.6/950-0024-drm-vc4-Force-trigger-of-dlist-update-on-margins-cha.patch @@ -0,0 +1,58 @@ +From c12bd0136e9772e955b5637185415d413d8d5b5c Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 1 Apr 2022 11:31:38 +0100 +Subject: [PATCH 0024/1085] drm/vc4: Force trigger of dlist update on margins + change + +When the margins are changed, the dlist needs to be regenerated +with the changed updated dest regions for each of the planes. + +Setting the zpos_changed flag is sufficient to trigger that +without doing a full modeset, therefore set it should the +margins be changed. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_crtc.c | 14 ++++++++++---- + drivers/gpu/drm/vc4/vc4_drv.h | 7 +------ + 2 files changed, 11 insertions(+), 10 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_crtc.c ++++ b/drivers/gpu/drm/vc4/vc4_crtc.c +@@ -752,10 +752,16 @@ int vc4_crtc_atomic_check(struct drm_crt + if (conn_state->crtc != crtc) + continue; + +- vc4_state->margins.left = conn_state->tv.margins.left; +- vc4_state->margins.right = conn_state->tv.margins.right; +- vc4_state->margins.top = conn_state->tv.margins.top; +- vc4_state->margins.bottom = conn_state->tv.margins.bottom; ++ if (memcmp(&vc4_state->margins, &conn_state->tv.margins, ++ sizeof(vc4_state->margins))) { ++ memcpy(&vc4_state->margins, &conn_state->tv.margins, ++ sizeof(vc4_state->margins)); ++ ++ /* Need to force the dlist entries for all planes to be ++ * updated so that the dest rectangles are changed. ++ */ ++ crtc_state->zpos_changed = true; ++ } + break; + } + +--- a/drivers/gpu/drm/vc4/vc4_drv.h ++++ b/drivers/gpu/drm/vc4/vc4_drv.h +@@ -626,12 +626,7 @@ struct vc4_crtc_state { + bool txp_armed; + unsigned int assigned_channel; + +- struct { +- unsigned int left; +- unsigned int right; +- unsigned int top; +- unsigned int bottom; +- } margins; ++ struct drm_connector_tv_margins margins; + + unsigned long hvs_load; + diff --git a/target/linux/bcm27xx/patches-6.6/950-0025-drm-atomic-helpers-remove-legacy_cursor_update-hacks.patch b/target/linux/bcm27xx/patches-6.6/950-0025-drm-atomic-helpers-remove-legacy_cursor_update-hacks.patch new file mode 100644 index 0000000000..97bc25b565 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.6/950-0025-drm-atomic-helpers-remove-legacy_cursor_update-hacks.patch @@ -0,0 +1,122 @@ +From 268e65023226cc59363dd9c9d9ad56a11588f4c3 Mon Sep 17 00:00:00 2001 +From: Daniel Vetter +Date: Fri, 23 Oct 2020 14:39:23 +0200 +Subject: [PATCH 0025/1085] drm/atomic-helpers: remove legacy_cursor_update + hacks +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +The stuff never really worked, and leads to lots of fun because it +out-of-order frees atomic states. Which upsets KASAN, among other +things. + +For async updates we now have a more solid solution with the +->atomic_async_check and ->atomic_async_commit hooks. Support for that +for msm and vc4 landed. nouveau and i915 have their own commit +routines, doing something similar. + +For everyone else it's probably better to remove the use-after-free +bug, and encourage folks to use the async support instead. The +affected drivers which register a legacy cursor plane and don't either +use the new async stuff or their own commit routine are: amdgpu, +atmel, mediatek, qxl, rockchip, sti, sun4i, tegra, virtio, and vmwgfx. + +Inspired by an amdgpu bug report. + +v2: Drop RFC, I think with amdgpu converted over to use +atomic_async_check/commit done in + +commit 674e78acae0dfb4beb56132e41cbae5b60f7d662 +Author: Nicholas Kazlauskas +Date: Wed Dec 5 14:59:07 2018 -0500 + + drm/amd/display: Add fast path for cursor plane updates + +we don't have any driver anymore where we have userspace expecting +solid legacy cursor support _and_ they are using the atomic helpers in +their fully glory. So we can retire this. + +v3: Paper over msm and i915 regression. The complete_all is the only +thing missing afaict. + +v4: Rebased on recent kernel, added extra link for vc4 bug. + +Link: https://bugzilla.kernel.org/show_bug.cgi?id=199425 +Link: https://lore.kernel.org/all/20220221134155.125447-9-maxime@cerno.tech/ +Cc: mikita.lipski@amd.com +Cc: Michel Dänzer +Cc: harry.wentland@amd.com +Cc: Rob Clark +Cc: "Kazlauskas, Nicholas" +Tested-by: Maxime Ripard +Signed-off-by: Daniel Vetter +Signed-off-by: Maxime Ripard +--- + drivers/gpu/drm/drm_atomic_helper.c | 13 ------------- + drivers/gpu/drm/i915/display/intel_display.c | 13 +++++++++++++ + drivers/gpu/drm/msm/msm_atomic.c | 2 ++ + 3 files changed, 15 insertions(+), 13 deletions(-) + +--- a/drivers/gpu/drm/drm_atomic_helper.c ++++ b/drivers/gpu/drm/drm_atomic_helper.c +@@ -1653,13 +1653,6 @@ drm_atomic_helper_wait_for_vblanks(struc + int i, ret; + unsigned int crtc_mask = 0; + +- /* +- * Legacy cursor ioctls are completely unsynced, and userspace +- * relies on that (by doing tons of cursor updates). +- */ +- if (old_state->legacy_cursor_update) +- return; +- + for_each_oldnew_crtc_in_state(old_state, crtc, old_crtc_state, new_crtc_state, i) { + if (!new_crtc_state->active) + continue; +@@ -2309,12 +2302,6 @@ int drm_atomic_helper_setup_commit(struc + complete_all(&commit->flip_done); + continue; + } +- +- /* Legacy cursor updates are fully unsynced. */ +- if (state->legacy_cursor_update) { +- complete_all(&commit->flip_done); +- continue; +- } + + if (!new_crtc_state->event) { + commit->event = kzalloc(sizeof(*commit->event), +--- a/drivers/gpu/drm/i915/display/intel_display.c ++++ b/drivers/gpu/drm/i915/display/intel_display.c +@@ -7280,6 +7280,19 @@ int intel_atomic_commit(struct drm_devic + state->base.legacy_cursor_update = false; + } + ++ /* ++ * FIXME: Cut over to (async) commit helpers instead of hand-rolling ++ * everything. ++ */ ++ if (state->base.legacy_cursor_update) { ++ struct intel_crtc_state *new_crtc_state; ++ struct intel_crtc *crtc; ++ int i; ++ ++ for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) ++ complete_all(&new_crtc_state->uapi.commit->flip_done); ++ } ++ + ret = intel_atomic_prepare_commit(state); + if (ret) { + drm_dbg_atomic(&dev_priv->drm, +--- a/drivers/gpu/drm/msm/msm_atomic.c ++++ b/drivers/gpu/drm/msm/msm_atomic.c +@@ -242,6 +242,8 @@ void msm_atomic_commit_tail(struct drm_a + /* async updates are limited to single-crtc updates: */ + WARN_ON(crtc_mask != drm_crtc_mask(async_crtc)); + ++ complete_all(&async_crtc->state->commit->flip_done); ++ + /* + * Start timer if we don't already have an update pending + * on this crtc: diff --git a/target/linux/bcm27xx/patches-6.6/950-0026-drm-atomic-If-margins-are-updated-update-all-planes.patch b/target/linux/bcm27xx/patches-6.6/950-0026-drm-atomic-If-margins-are-updated-update-all-planes.patch new file mode 100644 index 0000000000..90e39a8949 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.6/950-0026-drm-atomic-If-margins-are-updated-update-all-planes.patch @@ -0,0 +1,60 @@ +From f6d8271436e2589629ed6f3a8a85c3bde53353d6 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 1 Apr 2022 17:10:37 +0100 +Subject: [PATCH 0026/1085] drm/atomic: If margins are updated, update all + planes. + +Margins may be implemented by scaling the planes, but as there +is no way of intercepting the set_property for a standard property, +and all planes are checked in drm_atomic_check_only before the +connectors, there's now way to add the planes into the state +from the driver. + +If the margin properties change, add all corresponding planes to +the state. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/drm_atomic_uapi.c | 11 +++++++++++ + 1 file changed, 11 insertions(+) + +--- a/drivers/gpu/drm/drm_atomic_uapi.c ++++ b/drivers/gpu/drm/drm_atomic_uapi.c +@@ -701,6 +701,7 @@ static int drm_atomic_connector_set_prop + { + struct drm_device *dev = connector->dev; + struct drm_mode_config *config = &dev->mode_config; ++ bool margins_updated = false; + bool replaced = false; + int ret; + +@@ -729,12 +730,16 @@ static int drm_atomic_connector_set_prop + state->tv.subconnector = val; + } else if (property == config->tv_left_margin_property) { + state->tv.margins.left = val; ++ margins_updated = true; + } else if (property == config->tv_right_margin_property) { + state->tv.margins.right = val; ++ margins_updated = true; + } else if (property == config->tv_top_margin_property) { + state->tv.margins.top = val; ++ margins_updated = true; + } else if (property == config->tv_bottom_margin_property) { + state->tv.margins.bottom = val; ++ margins_updated = true; + } else if (property == config->legacy_tv_mode_property) { + state->tv.legacy_mode = val; + } else if (property == config->tv_mode_property) { +@@ -817,6 +822,12 @@ static int drm_atomic_connector_set_prop + return -EINVAL; + } + ++ if (margins_updated && state->crtc) { ++ ret = drm_atomic_add_affected_planes(state->state, state->crtc); ++ ++ return ret; ++ } ++ + return 0; + } + diff --git a/target/linux/bcm27xx/patches-6.6/950-0027-drm-vc4-hvs-Skip-DebugFS-Registration-for-FKMS.patch b/target/linux/bcm27xx/patches-6.6/950-0027-drm-vc4-hvs-Skip-DebugFS-Registration-for-FKMS.patch new file mode 100644 index 0000000000..ba03cfb7b9 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.6/950-0027-drm-vc4-hvs-Skip-DebugFS-Registration-for-FKMS.patch @@ -0,0 +1,25 @@ +From 8bfb80d65ef2ee6434517f5224d895c8f8eb57e6 Mon Sep 17 00:00:00 2001 +From: Maxime Ripard +Date: Mon, 11 Jul 2022 10:38:25 +0200 +Subject: [PATCH 0027/1085] drm/vc4: hvs: Skip DebugFS Registration for FKMS + +FKMS doesn't have an HVS and it's expected. Return from the debugfs init +function immediately if we're running with fkms. + +Signed-off-by: Maxime Ripard +--- + drivers/gpu/drm/vc4/vc4_hvs.c | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/drivers/gpu/drm/vc4/vc4_hvs.c ++++ b/drivers/gpu/drm/vc4/vc4_hvs.c +@@ -976,6 +976,9 @@ int vc4_hvs_debugfs_init(struct drm_mino + struct vc4_dev *vc4 = to_vc4_dev(drm); + struct vc4_hvs *hvs = vc4->hvs; + ++ if (vc4->firmware_kms) ++ return 0; ++ + if (!vc4->hvs) + return -ENODEV; + diff --git a/target/linux/bcm27xx/patches-6.6/950-0028-drm-vc4_hdmi-Allow-hotplug-detect-to-be-forced.patch b/target/linux/bcm27xx/patches-6.6/950-0028-drm-vc4_hdmi-Allow-hotplug-detect-to-be-forced.patch new file mode 100644 index 0000000000..bcef11a2f8 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.6/950-0028-drm-vc4_hdmi-Allow-hotplug-detect-to-be-forced.patch @@ -0,0 +1,58 @@ +From b67f05e1c4b2027b4950661b118c91850e747ee7 Mon Sep 17 00:00:00 2001 +From: Dom Cobley +Date: Wed, 1 Jun 2022 15:43:51 +0100 +Subject: [PATCH 0028/1085] drm/vc4_hdmi: Allow hotplug detect to be forced + +See: https://forum.libreelec.tv/thread/24783-tv-avr-turns-back-on-right-after-turning-them-off + +While the kernel provides a :D flag for assuming device is connected, +it doesn't stop this function from being called and generating a cec_phys_addr_invalidate +message when hotplug is deasserted. + +That message provokes a flurry of CEC messages which for many users results in the TV +switching back on again and it's very hard to get it to stay switched off. + +It seems to only occur with an AVR and TV connected but has been observed across a +number of manufacturers. + +The issue started with https://github.com/raspberrypi/linux/pull/4371 +and this provides an optional way of getting back the old behaviour + +Signed-off-by: Dom Cobley +--- + drivers/gpu/drm/vc4/vc4_hdmi.c | 10 +++++++++- + 1 file changed, 9 insertions(+), 1 deletion(-) + +--- a/drivers/gpu/drm/vc4/vc4_hdmi.c ++++ b/drivers/gpu/drm/vc4/vc4_hdmi.c +@@ -41,6 +41,8 @@ + #include + #include + #include ++#include ++#include + #include + #include + #include +@@ -109,6 +111,10 @@ + + #define HDMI_14_MAX_TMDS_CLK (340 * 1000 * 1000) + ++/* bit field to force hotplug detection. bit0 = HDMI0 */ ++static int force_hotplug = 0; ++module_param(force_hotplug, int, 0644); ++ + static const char * const output_format_str[] = { + [VC4_HDMI_OUTPUT_RGB] = "RGB", + [VC4_HDMI_OUTPUT_YUV420] = "YUV 4:2:0", +@@ -472,7 +478,9 @@ static int vc4_hdmi_connector_detect_ctx + + WARN_ON(pm_runtime_resume_and_get(&vc4_hdmi->pdev->dev)); + +- if (vc4_hdmi->hpd_gpio) { ++ if (force_hotplug & BIT(vc4_hdmi->encoder.type - VC4_ENCODER_TYPE_HDMI0)) ++ status = connector_status_connected; ++ else if (vc4_hdmi->hpd_gpio) { + if (gpiod_get_value_cansleep(vc4_hdmi->hpd_gpio)) + status = connector_status_connected; + } else { diff --git a/target/linux/bcm27xx/patches-6.6/950-0029-vc4_hdmi-Avoid-log-spam-for-audio-start-failure.patch b/target/linux/bcm27xx/patches-6.6/950-0029-vc4_hdmi-Avoid-log-spam-for-audio-start-failure.patch new file mode 100644 index 0000000000..ab66e4f6e5 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.6/950-0029-vc4_hdmi-Avoid-log-spam-for-audio-start-failure.patch @@ -0,0 +1,41 @@ +From 7508b889b8c8058e53ceeec90a1e3cc998897e16 Mon Sep 17 00:00:00 2001 +From: Dom Cobley +Date: Tue, 6 Dec 2022 15:05:56 +0000 +Subject: [PATCH 0029/1085] vc4_hdmi: Avoid log spam for audio start failure + +We regularly get dmesg error reports of: +[ 18.184066] hdmi-audio-codec hdmi-audio-codec.3.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 +[ 18.184098] MAI: soc_pcm_open() failed (-19) + +Currently I get 30 of these when booting to desktop. +We always say, ignore they are harmless, but removing them would be good. + +A bit of investigation shows, for me, the errors are all generated by second, unused hdmi interface. + +It shows as an alsa device, and pulseaudio attempts to open it (numerous times), generating a kernel +error message each time. + +systemctl --user restart pulseaudio.service generates 6 additional error messages. + +The error messages all come through: +https://github.com/raspberrypi/linux/blob/a009a9c0d79dfec114ee5102ec3d3325a172c952/sound/soc/soc-pcm.c#L39 + +which suggests returning ENOTSUPP, rather that ENODEV will be quiet. And indeed it is. + +Note: earlier kernels do not have the quiet ENOTSUPP, so additional cherry-picks will be needed to backport +Signed-off-by: Dom Cobley +--- + drivers/gpu/drm/vc4/vc4_hdmi.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/gpu/drm/vc4/vc4_hdmi.c ++++ b/drivers/gpu/drm/vc4/vc4_hdmi.c +@@ -2394,7 +2394,7 @@ static int vc4_hdmi_audio_startup(struct + } + + if (!vc4_hdmi_audio_can_stream(vc4_hdmi)) { +- ret = -ENODEV; ++ ret = -ENOTSUPP; + goto out_dev_exit; + } + diff --git a/target/linux/bcm27xx/patches-6.6/950-0030-drm-vc4-hvs-Defer-dlist-slots-deallocation.patch b/target/linux/bcm27xx/patches-6.6/950-0030-drm-vc4-hvs-Defer-dlist-slots-deallocation.patch new file mode 100644 index 0000000000..a53dd1fa63 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.6/950-0030-drm-vc4-hvs-Defer-dlist-slots-deallocation.patch @@ -0,0 +1,401 @@ +From bd8bb0ed9c5908f84502ee76a152370291727eef Mon Sep 17 00:00:00 2001 +From: Maxime Ripard +Date: Thu, 16 Dec 2021 14:54:54 +0100 +Subject: [PATCH 0030/1085] drm/vc4: hvs: Defer dlist slots deallocation + +During normal operations, the cursor position update is done through an +asynchronous plane update, which on the vc4 driver basically just +modifies the right dlist word to move the plane to the new coordinates. + +However, when we have the overscan margins setup, we fall back to a +regular commit when we are next to the edges. And since that commit +happens to be on a cursor plane, it's considered a legacy cursor update +by KMS. + +The main difference it makes is that it won't wait for its completion +(ie, next vblank) before returning. This means if we have multiple +commits happening in rapid succession, we can have several of them +happening before the next vblank. + +In parallel, our dlist allocation is tied to a CRTC state, and each time +we do a commit we end up with a new CRTC state, with the previous one +being freed. This means that we free our previous dlist entry (but don't +clear it though) every time a new one is being committed. + +Now, if we were to have two commits happening before the next vblank, we +could end up freeing reusing the same dlist entries before the next +vblank. + +Indeed, we would start from an initial state taking, for example, the +dlist entries 10 to 20, then start a commit taking the entries 20 to 30 +and setting the dlist pointer to 20, and freeing the dlist entries 10 to +20. However, since we haven't reach vblank yet, the HVS is still using +the entries 10 to 20. + +If we were to make a new commit now, chances are the allocator are going +to give the 10 to 20 entries back, and we would change their content to +match the new state. If vblank hasn't happened yet, we just corrupted +the active dlist entries. + +A first attempt to solve this was made by creating an intermediate dlist +buffer to store the current (ie, as of the last commit) dlist content, +that we would update each time the HVS is done with a frame. However, if +the interrupt handler missed the vblank window, we would end up copying +our intermediate dlist to the hardware one during the composition, +essentially creating the same issue. + +Since making sure that our interrupt handler runs within a fixed, +constrained, time window would require to make Linux a real-time kernel, +this seems a bit out of scope. + +Instead, we can work around our original issue by keeping the dlist +slots allocation longer. That way, we won't reuse a dlist slot while +it's still in flight. In order to achieve this, instead of freeing the +dlist slot when its associated CRTC state is destroyed, we'll queue it +in a list. + +A naive implementation would free the buffers in that queue when we get +our end of frame interrupt. However, there's still a race since, just +like in the shadow dlist case, we don't control when the handler for +that interrupt is going to run. Thus, we can end up with a commit adding +an old dlist allocation to our queue during the window between our +actual interrupt and when our handler will run. And since that buffer is +still being used for the composition of the current frame, we can't free +it right away, exposing us to the original bug. + +Fortunately for us, the hardware provides a frame counter that is +increased each time the first line of a frame is being generated. +Associating the frame counter the image is supposed to go away to the +allocation, and then only deallocate buffers that have a counter below +or equal to the one we see when the deallocation code should prevent the +above race from occuring. + +Signed-off-by: Maxime Ripard +--- + drivers/gpu/drm/vc4/vc4_crtc.c | 10 +- + drivers/gpu/drm/vc4/vc4_drv.h | 15 ++- + drivers/gpu/drm/vc4/vc4_hvs.c | 184 ++++++++++++++++++++++++++++++--- + 3 files changed, 186 insertions(+), 23 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_crtc.c ++++ b/drivers/gpu/drm/vc4/vc4_crtc.c +@@ -1097,14 +1097,8 @@ void vc4_crtc_destroy_state(struct drm_c + struct vc4_dev *vc4 = to_vc4_dev(crtc->dev); + struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(state); + +- if (drm_mm_node_allocated(&vc4_state->mm)) { +- unsigned long flags; +- +- spin_lock_irqsave(&vc4->hvs->mm_lock, flags); +- drm_mm_remove_node(&vc4_state->mm); +- spin_unlock_irqrestore(&vc4->hvs->mm_lock, flags); +- +- } ++ vc4_hvs_mark_dlist_entry_stale(vc4->hvs, vc4_state->mm); ++ vc4_state->mm = NULL; + + drm_atomic_helper_crtc_destroy_state(crtc, state); + } +--- a/drivers/gpu/drm/vc4/vc4_drv.h ++++ b/drivers/gpu/drm/vc4/vc4_drv.h +@@ -332,6 +332,9 @@ struct vc4_hvs { + struct drm_mm lbm_mm; + spinlock_t mm_lock; + ++ struct list_head stale_dlist_entries; ++ struct work_struct free_dlist_work; ++ + struct drm_mm_node mitchell_netravali_filter; + + struct debugfs_regset32 regset; +@@ -619,10 +622,16 @@ struct drm_connector *vc4_get_crtc_conne + struct drm_encoder *vc4_get_crtc_encoder(struct drm_crtc *crtc, + struct drm_crtc_state *state); + ++struct vc4_hvs_dlist_allocation { ++ struct list_head node; ++ struct drm_mm_node mm_node; ++ unsigned int channel; ++ u8 target_frame_count; ++}; ++ + struct vc4_crtc_state { + struct drm_crtc_state base; +- /* Dlist area for this CRTC configuration. */ +- struct drm_mm_node mm; ++ struct vc4_hvs_dlist_allocation *mm; + bool txp_armed; + unsigned int assigned_channel; + +@@ -1032,6 +1041,8 @@ struct vc4_hvs *__vc4_hvs_alloc(struct v + void vc4_hvs_stop_channel(struct vc4_hvs *hvs, unsigned int output); + int vc4_hvs_get_fifo_from_output(struct vc4_hvs *hvs, unsigned int output); + u8 vc4_hvs_get_fifo_frame_count(struct vc4_hvs *hvs, unsigned int fifo); ++void vc4_hvs_mark_dlist_entry_stale(struct vc4_hvs *hvs, ++ struct vc4_hvs_dlist_allocation *alloc); + int vc4_hvs_atomic_check(struct drm_crtc *crtc, struct drm_atomic_state *state); + void vc4_hvs_atomic_begin(struct drm_crtc *crtc, struct drm_atomic_state *state); + void vc4_hvs_atomic_enable(struct drm_crtc *crtc, struct drm_atomic_state *state); +--- a/drivers/gpu/drm/vc4/vc4_hvs.c ++++ b/drivers/gpu/drm/vc4/vc4_hvs.c +@@ -412,6 +412,152 @@ static void vc5_hvs_update_gamma_lut(str + vc5_hvs_lut_load(hvs, vc4_crtc); + } + ++static void vc4_hvs_irq_enable_eof(const struct vc4_hvs *hvs, ++ unsigned int channel) ++{ ++ struct vc4_dev *vc4 = hvs->vc4; ++ u32 irq_mask = vc4->is_vc5 ? ++ SCALER5_DISPCTRL_DSPEIEOF(channel) : ++ SCALER_DISPCTRL_DSPEIEOF(channel); ++ ++ HVS_WRITE(SCALER_DISPCTRL, ++ HVS_READ(SCALER_DISPCTRL) | irq_mask); ++} ++ ++static void vc4_hvs_irq_clear_eof(const struct vc4_hvs *hvs, ++ unsigned int channel) ++{ ++ struct vc4_dev *vc4 = hvs->vc4; ++ u32 irq_mask = vc4->is_vc5 ? ++ SCALER5_DISPCTRL_DSPEIEOF(channel) : ++ SCALER_DISPCTRL_DSPEIEOF(channel); ++ ++ HVS_WRITE(SCALER_DISPCTRL, ++ HVS_READ(SCALER_DISPCTRL) & ~irq_mask); ++} ++ ++static struct vc4_hvs_dlist_allocation * ++vc4_hvs_alloc_dlist_entry(struct vc4_hvs *hvs, ++ unsigned int channel, ++ size_t dlist_count) ++{ ++ struct vc4_hvs_dlist_allocation *alloc; ++ unsigned long flags; ++ int ret; ++ ++ if (channel == VC4_HVS_CHANNEL_DISABLED) ++ return NULL; ++ ++ alloc = kzalloc(sizeof(*alloc), GFP_KERNEL); ++ if (!alloc) ++ return ERR_PTR(-ENOMEM); ++ ++ spin_lock_irqsave(&hvs->mm_lock, flags); ++ ret = drm_mm_insert_node(&hvs->dlist_mm, &alloc->mm_node, ++ dlist_count); ++ spin_unlock_irqrestore(&hvs->mm_lock, flags); ++ if (ret) ++ return ERR_PTR(ret); ++ ++ alloc->channel = channel; ++ ++ return alloc; ++} ++ ++void vc4_hvs_mark_dlist_entry_stale(struct vc4_hvs *hvs, ++ struct vc4_hvs_dlist_allocation *alloc) ++{ ++ unsigned long flags; ++ u8 frcnt; ++ ++ if (!alloc) ++ return; ++ ++ if (!drm_mm_node_allocated(&alloc->mm_node)) ++ return; ++ ++ frcnt = vc4_hvs_get_fifo_frame_count(hvs, alloc->channel); ++ alloc->target_frame_count = (frcnt + 1) & ((1 << 6) - 1); ++ ++ spin_lock_irqsave(&hvs->mm_lock, flags); ++ ++ list_add_tail(&alloc->node, &hvs->stale_dlist_entries); ++ ++ HVS_WRITE(SCALER_DISPSTAT, SCALER_DISPSTAT_EOF(alloc->channel)); ++ vc4_hvs_irq_enable_eof(hvs, alloc->channel); ++ ++ spin_unlock_irqrestore(&hvs->mm_lock, flags); ++} ++ ++static void vc4_hvs_schedule_dlist_sweep(struct vc4_hvs *hvs, ++ unsigned int channel) ++{ ++ unsigned long flags; ++ ++ spin_lock_irqsave(&hvs->mm_lock, flags); ++ ++ if (!list_empty(&hvs->stale_dlist_entries)) ++ queue_work(system_unbound_wq, &hvs->free_dlist_work); ++ ++ vc4_hvs_irq_clear_eof(hvs, channel); ++ ++ spin_unlock_irqrestore(&hvs->mm_lock, flags); ++} ++ ++/* ++ * Frame counts are essentially sequence numbers over 6 bits, and we ++ * thus can use sequence number arithmetic and follow the RFC1982 to ++ * implement proper comparison between them. ++ */ ++static bool vc4_hvs_frcnt_lte(u8 cnt1, u8 cnt2) ++{ ++ return (s8)((cnt1 << 2) - (cnt2 << 2)) <= 0; ++} ++ ++/* ++ * Some atomic commits (legacy cursor updates, mostly) will not wait for ++ * the next vblank and will just return once the commit has been pushed ++ * to the hardware. ++ * ++ * On the hardware side, our HVS stores the planes parameters in its ++ * context RAM, and will use part of the RAM to store data during the ++ * frame rendering. ++ * ++ * This interacts badly if we get multiple commits before the next ++ * vblank since we could end up overwriting the DLIST entries used by ++ * previous commits if our dlist allocation reuses that entry. In such a ++ * case, we would overwrite the data currently being used by the ++ * hardware, resulting in a corrupted frame. ++ * ++ * In order to work around this, we'll queue the dlist entries in a list ++ * once the associated CRTC state is destroyed. The HVS only allows us ++ * to know which entry is being active, but not which one are no longer ++ * being used, so in order to avoid freeing entries that are still used ++ * by the hardware we add a guesstimate of the frame count where our ++ * entry will no longer be used, and thus will only free those entries ++ * when we will have reached that frame count. ++ */ ++static void vc4_hvs_dlist_free_work(struct work_struct *work) ++{ ++ struct vc4_hvs *hvs = container_of(work, struct vc4_hvs, free_dlist_work); ++ struct vc4_hvs_dlist_allocation *cur, *next; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&hvs->mm_lock, flags); ++ list_for_each_entry_safe(cur, next, &hvs->stale_dlist_entries, node) { ++ u8 frcnt; ++ ++ frcnt = vc4_hvs_get_fifo_frame_count(hvs, cur->channel); ++ if (!vc4_hvs_frcnt_lte(cur->target_frame_count, frcnt)) ++ continue; ++ ++ list_del(&cur->node); ++ drm_mm_remove_node(&cur->mm_node); ++ kfree(cur); ++ } ++ spin_unlock_irqrestore(&hvs->mm_lock, flags); ++} ++ + u8 vc4_hvs_get_fifo_frame_count(struct vc4_hvs *hvs, unsigned int fifo) + { + struct drm_device *drm = &hvs->vc4->base; +@@ -643,13 +789,12 @@ int vc4_hvs_atomic_check(struct drm_crtc + { + struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc); + struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(crtc_state); ++ struct vc4_hvs_dlist_allocation *alloc; + struct drm_device *dev = crtc->dev; + struct vc4_dev *vc4 = to_vc4_dev(dev); + struct drm_plane *plane; +- unsigned long flags; + const struct drm_plane_state *plane_state; + u32 dlist_count = 0; +- int ret; + + /* The pixelvalve can only feed one encoder (and encoders are + * 1:1 with connectors.) +@@ -662,12 +807,11 @@ int vc4_hvs_atomic_check(struct drm_crtc + + dlist_count++; /* Account for SCALER_CTL0_END. */ + +- spin_lock_irqsave(&vc4->hvs->mm_lock, flags); +- ret = drm_mm_insert_node(&vc4->hvs->dlist_mm, &vc4_state->mm, +- dlist_count); +- spin_unlock_irqrestore(&vc4->hvs->mm_lock, flags); +- if (ret) +- return ret; ++ alloc = vc4_hvs_alloc_dlist_entry(vc4->hvs, vc4_state->assigned_channel, dlist_count); ++ if (IS_ERR(alloc)) ++ return PTR_ERR(alloc); ++ ++ vc4_state->mm = alloc; + + return vc4_hvs_gamma_check(crtc, state); + } +@@ -683,8 +827,9 @@ static void vc4_hvs_install_dlist(struct + if (!drm_dev_enter(dev, &idx)) + return; + ++ WARN_ON(!vc4_state->mm); + HVS_WRITE(SCALER_DISPLISTX(vc4_state->assigned_channel), +- vc4_state->mm.start); ++ vc4_state->mm->mm_node.start); + + drm_dev_exit(idx); + } +@@ -711,8 +856,10 @@ static void vc4_hvs_update_dlist(struct + spin_unlock_irqrestore(&dev->event_lock, flags); + } + ++ WARN_ON(!vc4_state->mm); ++ + spin_lock_irqsave(&vc4_crtc->irq_lock, flags); +- vc4_crtc->current_dlist = vc4_state->mm.start; ++ vc4_crtc->current_dlist = vc4_state->mm->mm_node.start; + spin_unlock_irqrestore(&vc4_crtc->irq_lock, flags); + } + +@@ -769,8 +916,7 @@ void vc4_hvs_atomic_flush(struct drm_crt + struct vc4_plane_state *vc4_plane_state; + bool debug_dump_regs = false; + bool enable_bg_fill = false; +- u32 __iomem *dlist_start = vc4->hvs->dlist + vc4_state->mm.start; +- u32 __iomem *dlist_next = dlist_start; ++ u32 __iomem *dlist_start, *dlist_next; + unsigned int zpos = 0; + bool found = false; + int idx; +@@ -788,6 +934,9 @@ void vc4_hvs_atomic_flush(struct drm_crt + vc4_hvs_dump_state(hvs); + } + ++ dlist_start = vc4->hvs->dlist + vc4_state->mm->mm_node.start; ++ dlist_next = dlist_start; ++ + /* Copy all the active planes' dlist contents to the hardware dlist. */ + do { + found = false; +@@ -821,7 +970,8 @@ void vc4_hvs_atomic_flush(struct drm_crt + writel(SCALER_CTL0_END, dlist_next); + dlist_next++; + +- WARN_ON_ONCE(dlist_next - dlist_start != vc4_state->mm.size); ++ WARN_ON(!vc4_state->mm); ++ WARN_ON_ONCE(dlist_next - dlist_start != vc4_state->mm->mm_node.size); + + if (enable_bg_fill) + /* This sets a black background color fill, as is the case +@@ -960,6 +1110,11 @@ static irqreturn_t vc4_hvs_irq_handler(i + + irqret = IRQ_HANDLED; + } ++ ++ if (status & SCALER_DISPSTAT_EOF(channel)) { ++ vc4_hvs_schedule_dlist_sweep(hvs, channel); ++ irqret = IRQ_HANDLED; ++ } + } + + /* Clear every per-channel interrupt flag. */ +@@ -1014,6 +1169,9 @@ struct vc4_hvs *__vc4_hvs_alloc(struct v + + spin_lock_init(&hvs->mm_lock); + ++ INIT_LIST_HEAD(&hvs->stale_dlist_entries); ++ INIT_WORK(&hvs->free_dlist_work, vc4_hvs_dlist_free_work); ++ + /* Set up the HVS display list memory manager. We never + * overwrite the setup from the bootloader (just 128b out of + * our 16K), since we don't want to scramble the screen when diff --git a/target/linux/bcm27xx/patches-6.6/950-0031-drm-vc4-hvs-Initialize-the-dlist-allocation-list-ent.patch b/target/linux/bcm27xx/patches-6.6/950-0031-drm-vc4-hvs-Initialize-the-dlist-allocation-list-ent.patch new file mode 100644 index 0000000000..d250dd4e1e --- /dev/null +++ b/target/linux/bcm27xx/patches-6.6/950-0031-drm-vc4-hvs-Initialize-the-dlist-allocation-list-ent.patch @@ -0,0 +1,30 @@ +From bc1c5829ecc698e41379f461f1fd7e8d600b879f Mon Sep 17 00:00:00 2001 +From: Maxime Ripard +Date: Wed, 25 Jan 2023 12:38:37 +0100 +Subject: [PATCH 0031/1085] drm/vc4: hvs: Initialize the dlist allocation list + entry + +The vc4_hvs_dlist_allocation structure has a list that we don't +initialize when we allocate a new instance. + +This makes any call reading the list structure (such as list_empty) fail +with a NULL pointer dereference. + +Let's make sure our list is always initialized. + +Signed-off-by: Maxime Ripard +--- + drivers/gpu/drm/vc4/vc4_hvs.c | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/drivers/gpu/drm/vc4/vc4_hvs.c ++++ b/drivers/gpu/drm/vc4/vc4_hvs.c +@@ -452,6 +452,8 @@ vc4_hvs_alloc_dlist_entry(struct vc4_hvs + if (!alloc) + return ERR_PTR(-ENOMEM); + ++ INIT_LIST_HEAD(&alloc->node); ++ + spin_lock_irqsave(&hvs->mm_lock, flags); + ret = drm_mm_insert_node(&hvs->dlist_mm, &alloc->mm_node, + dlist_count); diff --git a/target/linux/bcm27xx/patches-6.6/950-0032-drm-vc4-hvs-Move-the-dlist-allocation-destruction-to.patch b/target/linux/bcm27xx/patches-6.6/950-0032-drm-vc4-hvs-Move-the-dlist-allocation-destruction-to.patch new file mode 100644 index 0000000000..f6fe9e1a4c --- /dev/null +++ b/target/linux/bcm27xx/patches-6.6/950-0032-drm-vc4-hvs-Move-the-dlist-allocation-destruction-to.patch @@ -0,0 +1,46 @@ +From 9e2b5f6b8d74b18c96521c3e9ddd3f7fc75d917f Mon Sep 17 00:00:00 2001 +From: Maxime Ripard +Date: Wed, 25 Jan 2023 12:54:36 +0100 +Subject: [PATCH 0032/1085] drm/vc4: hvs: Move the dlist allocation destruction + to a function + +We'll need to destroy a dlist allocation in multiple code paths, so +let's move it to a separate function. + +Signed-off-by: Maxime Ripard +--- + drivers/gpu/drm/vc4/vc4_hvs.c | 16 +++++++++++++--- + 1 file changed, 13 insertions(+), 3 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_hvs.c ++++ b/drivers/gpu/drm/vc4/vc4_hvs.c +@@ -466,6 +466,18 @@ vc4_hvs_alloc_dlist_entry(struct vc4_hvs + return alloc; + } + ++static void vc4_hvs_free_dlist_entry_locked(struct vc4_hvs *hvs, ++ struct vc4_hvs_dlist_allocation *alloc) ++{ ++ lockdep_assert_held(&hvs->mm_lock); ++ ++ if (!list_empty(&alloc->node)) ++ list_del(&alloc->node); ++ ++ drm_mm_remove_node(&alloc->mm_node); ++ kfree(alloc); ++} ++ + void vc4_hvs_mark_dlist_entry_stale(struct vc4_hvs *hvs, + struct vc4_hvs_dlist_allocation *alloc) + { +@@ -553,9 +565,7 @@ static void vc4_hvs_dlist_free_work(stru + if (!vc4_hvs_frcnt_lte(cur->target_frame_count, frcnt)) + continue; + +- list_del(&cur->node); +- drm_mm_remove_node(&cur->mm_node); +- kfree(cur); ++ vc4_hvs_free_dlist_entry_locked(hvs, cur); + } + spin_unlock_irqrestore(&hvs->mm_lock, flags); + } diff --git a/target/linux/bcm27xx/patches-6.6/950-0033-drm-vc4-hvs-Destroy-dlist-allocations-immediately-wh.patch b/target/linux/bcm27xx/patches-6.6/950-0033-drm-vc4-hvs-Destroy-dlist-allocations-immediately-wh.patch new file mode 100644 index 0000000000..6c8689e169 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.6/950-0033-drm-vc4-hvs-Destroy-dlist-allocations-immediately-wh.patch @@ -0,0 +1,48 @@ +From e546f85606dcf2cdff94ff32a0756e2541bccb05 Mon Sep 17 00:00:00 2001 +From: Maxime Ripard +Date: Wed, 25 Jan 2023 13:05:26 +0100 +Subject: [PATCH 0033/1085] drm/vc4: hvs: Destroy dlist allocations immediately + when running a test + +When running a kunit test, the driver runs with a mock device. As such, +any attempt to read or write to a hardware register will fail the +current test immediately. + +The dlist allocation management recently introduced will read the +current frame count from the HVS to defer its destruction until a +subsequent frame has been output. This obviously involves a register +read that fails the Kunit tests. + +Change the destruction deferral function to destroy the allocation +immediately if we run under kunit. This is essentially harmless since +the main reason for that deferall is to prevent any access to the +hardware dlist while a frame described by that list is rendered. On our +mock driver, we have neither a hardware dlist nor a rendering, so it +doesn't matter. + +Signed-off-by: Maxime Ripard +--- + drivers/gpu/drm/vc4/vc4_hvs.c | 12 ++++++++++++ + 1 file changed, 12 insertions(+) + +--- a/drivers/gpu/drm/vc4/vc4_hvs.c ++++ b/drivers/gpu/drm/vc4/vc4_hvs.c +@@ -490,6 +490,18 @@ void vc4_hvs_mark_dlist_entry_stale(stru + if (!drm_mm_node_allocated(&alloc->mm_node)) + return; + ++ /* ++ * Kunit tests run with a mock device and we consider any hardware ++ * access a test failure. Let's free the dlist allocation right away if ++ * we're running under kunit, we won't risk a dlist corruption anyway. ++ */ ++ if (kunit_get_current_test()) { ++ spin_lock_irqsave(&hvs->mm_lock, flags); ++ vc4_hvs_free_dlist_entry_locked(hvs, alloc); ++ spin_unlock_irqrestore(&hvs->mm_lock, flags); ++ return; ++ } ++ + frcnt = vc4_hvs_get_fifo_frame_count(hvs, alloc->channel); + alloc->target_frame_count = (frcnt + 1) & ((1 << 6) - 1); + diff --git a/target/linux/bcm27xx/patches-6.6/950-0034-drm-vc4_plane-Add-support-for-YUV444-formats.patch b/target/linux/bcm27xx/patches-6.6/950-0034-drm-vc4_plane-Add-support-for-YUV444-formats.patch new file mode 100644 index 0000000000..b7c2fa3589 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.6/950-0034-drm-vc4_plane-Add-support-for-YUV444-formats.patch @@ -0,0 +1,53 @@ +From fb2081692fb040f6260e008272c9f6cb155c9a77 Mon Sep 17 00:00:00 2001 +From: Dom Cobley +Date: Tue, 31 Jan 2023 15:14:32 +0000 +Subject: [PATCH 0034/1085] drm/vc4_plane: Add support for YUV444 formats + +Support displaying DRM_FORMAT_YUV444 and DRM_FORMAT_YVU444 formats. +Tested with kmstest and kodi. e.g. + +kmstest -r 1920x1080@60 -f 400x300-YU24 + +Note: without the shift of width, only half the chroma is fetched, +resulting in correct left half of image and corrupt colours on right half. + +The increase in width shouldn't affect fetching of Y data, +as the hardware will clamp at dest width. + +Signed-off-by: Dom Cobley +--- + drivers/gpu/drm/vc4/vc4_plane.c | 16 ++++++++++++++++ + 1 file changed, 16 insertions(+) + +--- a/drivers/gpu/drm/vc4/vc4_plane.c ++++ b/drivers/gpu/drm/vc4/vc4_plane.c +@@ -110,6 +110,18 @@ static const struct hvs_format { + .pixel_order_hvs5 = HVS_PIXEL_ORDER_XYCRCB, + }, + { ++ .drm = DRM_FORMAT_YUV444, ++ .hvs = HVS_PIXEL_FORMAT_YCBCR_YUV422_3PLANE, ++ .pixel_order = HVS_PIXEL_ORDER_XYCBCR, ++ .pixel_order_hvs5 = HVS_PIXEL_ORDER_XYCBCR, ++ }, ++ { ++ .drm = DRM_FORMAT_YVU444, ++ .hvs = HVS_PIXEL_FORMAT_YCBCR_YUV422_3PLANE, ++ .pixel_order = HVS_PIXEL_ORDER_XYCRCB, ++ .pixel_order_hvs5 = HVS_PIXEL_ORDER_XYCRCB, ++ }, ++ { + .drm = DRM_FORMAT_YUV420, + .hvs = HVS_PIXEL_FORMAT_YCBCR_YUV420_3PLANE, + .pixel_order = HVS_PIXEL_ORDER_XYCBCR, +@@ -1106,6 +1118,10 @@ static int vc4_plane_mode_set(struct drm + vc4_state->src_y + vc4_state->src_h[0] < (state->fb->height << 16)) + height++; + ++ /* for YUV444 hardware wants double the width, otherwise it doesn't fetch full width of chroma */ ++ if (format->drm == DRM_FORMAT_YUV444 || format->drm == DRM_FORMAT_YVU444) ++ width <<= 1; ++ + /* Don't waste cycles mixing with plane alpha if the set alpha + * is opaque or there is no per-pixel alpha information. + * In any case we use the alpha property value as the fixed alpha. diff --git a/target/linux/bcm27xx/patches-6.6/950-0035-drm-vc4-Calculate-bpc-based-on-max_requested_bpc.patch b/target/linux/bcm27xx/patches-6.6/950-0035-drm-vc4-Calculate-bpc-based-on-max_requested_bpc.patch new file mode 100644 index 0000000000..cdd8552438 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.6/950-0035-drm-vc4-Calculate-bpc-based-on-max_requested_bpc.patch @@ -0,0 +1,29 @@ +From 57fe034a5020aca4a7d1558b21c31737c2abc15e Mon Sep 17 00:00:00 2001 +From: Matthias Reichl +Date: Sat, 14 Jan 2023 16:24:39 +0100 +Subject: [PATCH 0035/1085] drm/vc4: Calculate bpc based on max_requested_bpc + +This aligns vc4 with Intel, AMD and Synopsis drivers and fixes max bpc +connector property not working as expected on monitors with YCbCr 4:2:2 +support but not deep color support. + +max_bpc in connector state is clamped at max_bpc from display info and +the latter only takes deep color modes into account so it will always +be 8, even if the display can do 4:2:2 12-bit output. + +Signed-off-by: Matthias Reichl +--- + drivers/gpu/drm/vc4/vc4_hdmi.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/gpu/drm/vc4/vc4_hdmi.c ++++ b/drivers/gpu/drm/vc4/vc4_hdmi.c +@@ -2126,7 +2126,7 @@ vc4_hdmi_encoder_compute_config(const st + { + struct drm_device *dev = vc4_hdmi->connector.dev; + struct drm_connector_state *conn_state = &vc4_state->base; +- unsigned int max_bpc = clamp_t(unsigned int, conn_state->max_bpc, 8, 12); ++ unsigned int max_bpc = clamp_t(unsigned int, conn_state->max_requested_bpc, 8, 12); + unsigned int bpc; + int ret; + diff --git a/target/linux/bcm27xx/patches-6.6/950-0036-drm-vc4-Set-AXI-panic-modes-for-the-HVS.patch b/target/linux/bcm27xx/patches-6.6/950-0036-drm-vc4-Set-AXI-panic-modes-for-the-HVS.patch new file mode 100644 index 0000000000..9960947395 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.6/950-0036-drm-vc4-Set-AXI-panic-modes-for-the-HVS.patch @@ -0,0 +1,39 @@ +From 78a1315a44243385c57289a2c30f3b25de87b603 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Thu, 11 Aug 2022 13:59:34 +0100 +Subject: [PATCH 0036/1085] drm/vc4: Set AXI panic modes for the HVS + +The HVS can change AXI request mode based on how full the COB +FIFOs are. +Until now the vc4 driver has been relying on the firmware to +have set these to sensible values. + +With HVS channel 2 now being used for live video, change the +panic mode for all channels to be explicitly set by the driver, +and the same for all channels. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_hvs.c | 11 +++++++++++ + 1 file changed, 11 insertions(+) + +--- a/drivers/gpu/drm/vc4/vc4_hvs.c ++++ b/drivers/gpu/drm/vc4/vc4_hvs.c +@@ -1363,6 +1363,17 @@ static int vc4_hvs_bind(struct device *d + dispctrl |= VC4_SET_FIELD(2, SCALER_DISPCTRL_PANIC1); + dispctrl |= VC4_SET_FIELD(2, SCALER_DISPCTRL_PANIC2); + ++ /* Set AXI panic mode. ++ * VC4 panics when < 2 lines in FIFO. ++ * VC5 panics when less than 1 line in the FIFO. ++ */ ++ dispctrl &= ~(SCALER_DISPCTRL_PANIC0_MASK | ++ SCALER_DISPCTRL_PANIC1_MASK | ++ SCALER_DISPCTRL_PANIC2_MASK); ++ dispctrl |= VC4_SET_FIELD(2, SCALER_DISPCTRL_PANIC0); ++ dispctrl |= VC4_SET_FIELD(2, SCALER_DISPCTRL_PANIC1); ++ dispctrl |= VC4_SET_FIELD(2, SCALER_DISPCTRL_PANIC2); ++ + HVS_WRITE(SCALER_DISPCTRL, dispctrl); + + /* Recompute Composite Output Buffer (COB) allocations for the displays diff --git a/target/linux/bcm27xx/patches-6.6/950-0037-drm-vc4-drop-unnecessary-and-harmful-HDMI-RGB-format.patch b/target/linux/bcm27xx/patches-6.6/950-0037-drm-vc4-drop-unnecessary-and-harmful-HDMI-RGB-format.patch new file mode 100644 index 0000000000..b0b3080b7f --- /dev/null +++ b/target/linux/bcm27xx/patches-6.6/950-0037-drm-vc4-drop-unnecessary-and-harmful-HDMI-RGB-format.patch @@ -0,0 +1,37 @@ +From 4b89e6e55f5c04f836b92ffbeef7c4c8a545adfd Mon Sep 17 00:00:00 2001 +From: Matthias Reichl +Date: Sat, 11 Mar 2023 22:41:17 +0100 +Subject: [PATCH 0037/1085] drm/vc4: drop unnecessary and harmful HDMI RGB + format check + +RGB is a mandatory format for all DVI and HDMI monitors so there's +no need to check for presence of the DRM_COLOR_FORMAT_RGB444 bit in +color_formats. + +More importantly this checks breaks working around EDID issues with +eg video=HDMI-A-1:1024x768D or drm.edid_firmware=edid/1024x768.bin +as the RGB444 bit is only set when a valid EDID with digital bit set in +the input byte is present - which isn't the case when no EDID can be +read from the display device at all or with the in-built kernel EDIDs, +which mimic analog (VGA) displays without the digital bit set. + +So drop the check, if we output video on the HDMI connector we can +assume that the display can accept 8bit RGB. + +Signed-off-by: Matthias Reichl +--- + drivers/gpu/drm/vc4/vc4_hdmi.c | 3 --- + 1 file changed, 3 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_hdmi.c ++++ b/drivers/gpu/drm/vc4/vc4_hdmi.c +@@ -1952,9 +1952,6 @@ vc4_hdmi_sink_supports_format_bpc(const + case VC4_HDMI_OUTPUT_RGB: + drm_dbg(dev, "RGB Format, checking the constraints.\n"); + +- if (!(info->color_formats & DRM_COLOR_FORMAT_RGB444)) +- return false; +- + if (bpc == 10 && !(info->edid_hdmi_rgb444_dc_modes & DRM_EDID_HDMI_DC_30)) { + drm_dbg(dev, "10 BPC but sink doesn't support Deep Color 30.\n"); + return false; diff --git a/target/linux/bcm27xx/patches-6.6/950-0038-drm-vc4-Limit-max_bpc-to-8-on-Pi0-3.patch b/target/linux/bcm27xx/patches-6.6/950-0038-drm-vc4-Limit-max_bpc-to-8-on-Pi0-3.patch new file mode 100644 index 0000000000..96abd64f23 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.6/950-0038-drm-vc4-Limit-max_bpc-to-8-on-Pi0-3.patch @@ -0,0 +1,37 @@ +From accb4b40a97c432b8a83f6fedf12b015aebb711d Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 24 Apr 2023 18:32:45 +0100 +Subject: [PATCH 0038/1085] drm/vc4: Limit max_bpc to 8 on Pi0-3 + +Pi 0-3 have no deep colour support and only 24bpp output, +so max_bpc should remain as 8. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_hdmi.c | 7 +++++-- + 1 file changed, 5 insertions(+), 2 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_hdmi.c ++++ b/drivers/gpu/drm/vc4/vc4_hdmi.c +@@ -756,7 +756,6 @@ static int vc4_hdmi_connector_init(struc + + drm_connector_attach_colorspace_property(connector); + drm_connector_attach_tv_margin_properties(connector); +- drm_connector_attach_max_bpc_property(connector, 8, 12); + + connector->polled = (DRM_CONNECTOR_POLL_CONNECT | + DRM_CONNECTOR_POLL_DISCONNECT); +@@ -765,8 +764,12 @@ static int vc4_hdmi_connector_init(struc + connector->doublescan_allowed = 0; + connector->stereo_allowed = 1; + +- if (vc4_hdmi->variant->supports_hdr) ++ if (vc4_hdmi->variant->supports_hdr) { ++ drm_connector_attach_max_bpc_property(connector, 8, 12); + drm_connector_attach_hdr_output_metadata_property(connector); ++ } else { ++ drm_connector_attach_max_bpc_property(connector, 8, 8); ++ } + + vc4_hdmi_attach_broadcast_rgb_property(dev, vc4_hdmi); + diff --git a/target/linux/bcm27xx/patches-6.6/950-0039-arm64-setup-Fix-build-warning.patch b/target/linux/bcm27xx/patches-6.6/950-0039-arm64-setup-Fix-build-warning.patch new file mode 100644 index 0000000000..a53c896daa --- /dev/null +++ b/target/linux/bcm27xx/patches-6.6/950-0039-arm64-setup-Fix-build-warning.patch @@ -0,0 +1,24 @@ +From e51e9120a35d0b1600e4337e6ecbd020c074af80 Mon Sep 17 00:00:00 2001 +From: Maxime Ripard +Date: Mon, 6 Jun 2022 11:02:16 +0200 +Subject: [PATCH 0039/1085] arm64: setup: Fix build warning + +Signed-off-by: Maxime Ripard +--- + arch/arm64/kernel/setup.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/arch/arm64/kernel/setup.c ++++ b/arch/arm64/kernel/setup.c +@@ -225,9 +225,9 @@ static void __init request_standard_reso + size_t res_size; + + kernel_code.start = __pa_symbol(_stext); +- kernel_code.end = __pa_symbol(__init_begin - 1); ++ kernel_code.end = __pa_symbol(__init_begin) - 1; + kernel_data.start = __pa_symbol(_sdata); +- kernel_data.end = __pa_symbol(_end - 1); ++ kernel_data.end = __pa_symbol(_end) - 1; + insert_resource(&iomem_resource, &kernel_code); + insert_resource(&iomem_resource, &kernel_data); + diff --git a/target/linux/bcm27xx/patches-6.6/950-0040-BCM2708-Add-core-Device-Tree-support.patch b/target/linux/bcm27xx/patches-6.6/950-0040-BCM2708-Add-core-Device-Tree-support.patch new file mode 100644 index 0000000000..0d6895d4f6 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.6/950-0040-BCM2708-Add-core-Device-Tree-support.patch @@ -0,0 +1,38633 @@ +From d060fc0b45684ad90d12d81e08680f03fc44e305 Mon Sep 17 00:00:00 2001 +From: notro +Date: Wed, 9 Jul 2014 14:46:08 +0200 +Subject: [PATCH 0040/1085] BCM2708: Add core Device Tree support +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add the bare minimum needed to boot BCM2708 from a Device Tree. + +Signed-off-by: Noralf Tronnes + +BCM2708: DT: change 'axi' nodename to 'soc' + +Change DT node named 'axi' to 'soc' so it matches ARCH_BCM2835. +The VC4 bootloader fills in certain properties in the 'axi' subtree, +but since this is part of an upstreaming effort, the name is changed. + +Signed-off-by: Noralf Tronnes notro@tronnes.org + +BCM2708_DT: Correct length of the peripheral space + +Use dts-dirs feature for overlays. + +The kernel makefiles have a dts-dirs target that is for vendor subdirectories. + +Using this fixes the install_dtbs target, which previously did not install the overlays. + +BCM270X_DT: configure I2S DMA channels + +Signed-off-by: Matthias Reichl + +BCM270X_DT: switch to bcm2835-i2s + +I2S soundcard drivers with proper devicetree support (i.e. not linking +to the cpu_dai/platform via name but to cpu/platform via of_node) +will work out of the box without any modifications. + +When the kernel is compiled without devicetree support the platform +code will instantiate the bcm2708-i2s driver and I2S soundcard drivers +will link to it via name, as before. + +Signed-off-by: Matthias Reichl + +SDIO-overlay: add poll_once-boolean parameter + +Add paramter to toggle sdio-device-polling +done every second or once at boot-time. + +Signed-off-by: Patrick Boettcher + +BCM270X_DT: Make mmc overlay compatible with current firmware + +The original DT overlay logic followed a merge-then-patch procedure, +i.e. parameters are applied to the loaded overlay before the overlay +is merged into the base DTB. This sequence has been changed to +patch-then-merge, in order to support parameterised node names, and +to protect against bad overlays. As a result, overrides (parameters) +must only target labels in the overlay, but the overlay can obviously target nodes in the base DTB. + +mmc-overlay.dts (that switches back to the original mmc sdcard +driver) is the only overlay violating that rule, and this patch +fixes it. + +bcm270x_dt: Use the sdhost MMC controller by default + +The "mmc" overlay reverts to using the other controller. + +squash: Add cprman to dt + +BCM270X_DT: Use clk_core for I2C interfaces + +BCM270X_DT: Use bcm283x.dtsi, bcm2835.dtsi and bcm2836.dtsi + +The mainline Device Tree files are quite close to downstream now. +Let's use bcm283x.dtsi, bcm2835.dtsi and bcm2836.dtsi as base files +for our dts files. + +Mainline dts files are based on these files: + + bcm2835-rpi.dtsi + bcm2835.dtsi bcm2836.dtsi + bcm283x.dtsi + +Current downstream are based on these: + + bcm2708.dtsi bcm2709.dtsi bcm2710.dtsi + bcm2708_common.dtsi + +This patch introduces this dependency: + + bcm2708.dtsi bcm2709.dtsi + bcm2708-rpi.dtsi + bcm270x.dtsi + bcm2835.dtsi bcm2836.dtsi + bcm283x.dtsi + +And: + bcm2710.dtsi + bcm2708-rpi.dtsi + bcm270x.dtsi + bcm283x.dtsi + +bcm270x.dtsi contains the downstream bcm283x.dtsi diff. +bcm2708-rpi.dtsi is the downstream version of bcm2835-rpi.dtsi. + +Other changes: +- The led node has moved from /soc/leds to /leds. This is not a problem + since the label is used to reference it. +- The clk_osc reg property changes from 6 to 3. +- The gpu nodes has their interrupt property set in the base file. +- the clocks label does not point to the /clocks node anymore, but + points to the cprman node. This is not a problem since the overlays + that use the clock node refer to it directly: target-path = "/clocks"; +- some nodes now have 2 labels since mainline and downstream differs in + this respect: cprman/clocks, spi0/spi, gpu/vc4. +- some nodes doesn't have an explicit status = "okay" since they're not + disabled in the base file: watchdog and random. +- gpiomem doesn't need an explicit status = "okay". +- bcm2708-rpi-cm.dts got the hpd-gpios property from bcm2708_common.dtsi, + it's now set directly in that file. +- bcm2709-rpi-2-b.dts has the timer node moved from /soc/timer to /timer. +- Removed clock-frequency property on the bcm{2709,2710}.dtsi timer nodes. + +Signed-off-by: Noralf Trønnes + +BCM270X_DT: Use raspberrypi-power to turn on USB power + +Use the raspberrypi-power driver to turn on USB power. + +Signed-off-by: Noralf Trønnes + +BCM270X_DT: Add a .dtbo target, use for overlays + +Change the filenames and extensions to keep the pre-DDT style of +overlay (-overlay.dtb) distinct from new ones that use a +different style of local fixups (.dtbo), and to match other +platforms. + +The RPi firmware uses the DDTK trailer atom to choose which type of +overlay to use for each kernel. + +Signed-off-by: Phil Elwell + +BCM270X_DT: Don't generate "linux,phandle" props + +The EPAPR standard says to use "phandle" properties to store phandles, +rather than the deprecated "linux,phandle" version. By default, dtc +generates both, but adding "-H epapr" causes it to only generate +"phandle"s, saving some space and clutter. + +Signed-off-by: Phil Elwell + +BCM270X_DT: Add overlay for enc28j60 on SPI2 + +Works on SPI2 for compute module + +BCM270X_DT: Add midi-uart0 overlay + +MIDI requires 31.25kbaud, a baudrate unsupported by Linux. The +midi-uart0 overlay configures uart0 (ttyAMA0) to use a fake clock +so that requesting 38.4kbaud actually gets 31.25kbaud. + +Signed-off-by: Phil Elwell + +BCM270X_DT: Add i2c-sensor overlay + +The i2c-sensor overlay is a container for various pressure and +temperature sensors, currently bmp085 and bmp280. The standalone +bmp085_i2c-sensor overlay is now deprecated. + +Signed-off-by: Phil Elwell + +BCM270X_DT: overlays/*-overlay.dtb -> overlays/*.dtbo (#1752) + +We now create overlays as .dtbo files. + +build: support for .dtbo files for dtb overlays + +Kernel 4.4.6+ on RaspberryPi support .dtbo files for overlays, instead of .dtb. +Patch the kernel, which has faulty rules to generate .dtbo the way yocto does + +Signed-off-by: Herve Jourdain +Signed-off-by: Khem Raj + +BCM270X: Drop position requirement for CMA in VC4 overlay. + +No longer necessary since 2aefcd576195a739a7a256099571c9c4a401005f, +and will probably let peeople that want to choose a larger CMA +allocation (particularly on pi0/1). + +Signed-off-by: Eric Anholt + +BCM270X_DT: RPi Device Tree tidy + +Use the upstream sdhost node, add thermal-zones, and factor out some +common elements. + +Signed-off-by: Phil Elwell + +kbuild: Silence unhelpful DTC warnings + +Signed-off-by: Phil Elwell + +BCM270X_DT: DT build rules no longer arch-specific + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/Makefile | 5 + + arch/arm/boot/dts/broadcom/Makefile | 35 + + .../boot/dts/broadcom/bcm2708-rpi-b-plus.dts | 208 + + .../boot/dts/broadcom/bcm2708-rpi-b-rev1.dts | 220 + + arch/arm/boot/dts/broadcom/bcm2708-rpi-b.dts | 195 + + .../arm/boot/dts/broadcom/bcm2708-rpi-bt.dtsi | 38 + + arch/arm/boot/dts/broadcom/bcm2708-rpi-cm.dts | 171 + + .../arm/boot/dts/broadcom/bcm2708-rpi-cm.dtsi | 27 + + .../boot/dts/broadcom/bcm2708-rpi-zero-w.dts | 254 + + .../boot/dts/broadcom/bcm2708-rpi-zero.dts | 189 + + arch/arm/boot/dts/broadcom/bcm2708-rpi.dtsi | 40 + + arch/arm/boot/dts/broadcom/bcm2708.dtsi | 19 + + .../arm/boot/dts/broadcom/bcm2709-rpi-2-b.dts | 202 + + .../arm/boot/dts/broadcom/bcm2709-rpi-cm2.dts | 220 + + arch/arm/boot/dts/broadcom/bcm2709-rpi.dtsi | 8 + + arch/arm/boot/dts/broadcom/bcm2709.dtsi | 29 + + arch/arm/boot/dts/broadcom/bcm270x-rpi.dtsi | 180 + + arch/arm/boot/dts/broadcom/bcm270x.dtsi | 294 + + .../arm/boot/dts/broadcom/bcm2710-rpi-2-b.dts | 202 + + .../dts/broadcom/bcm2710-rpi-3-b-plus.dts | 297 + + .../arm/boot/dts/broadcom/bcm2710-rpi-3-b.dts | 299 ++ + .../arm/boot/dts/broadcom/bcm2710-rpi-cm3.dts | 220 + + .../dts/broadcom/bcm2710-rpi-zero-2-w.dts | 272 + + .../boot/dts/broadcom/bcm2710-rpi-zero-2.dts | 1 + + arch/arm/boot/dts/broadcom/bcm2710.dtsi | 32 + + .../arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts | 177 +- + .../arm/boot/dts/broadcom/bcm2711-rpi-400.dts | 41 + + .../arm/boot/dts/broadcom/bcm2711-rpi-cm4.dts | 443 ++ + .../boot/dts/broadcom/bcm2711-rpi-cm4s.dts | 295 + + .../arm/boot/dts/broadcom/bcm2711-rpi-ds.dtsi | 534 ++ + arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi | 13 + + .../arm/boot/dts/broadcom/bcm271x-rpi-bt.dtsi | 38 + + .../dts/broadcom/bcm283x-rpi-csi0-2lane.dtsi | 4 + + .../dts/broadcom/bcm283x-rpi-csi1-2lane.dtsi | 4 + + .../dts/broadcom/bcm283x-rpi-csi1-4lane.dtsi | 4 + + .../broadcom/bcm283x-rpi-i2c0mux_0_28.dtsi | 4 + + .../broadcom/bcm283x-rpi-i2c0mux_0_44.dtsi | 4 + + arch/arm/boot/dts/overlays/Makefile | 295 + + arch/arm/boot/dts/overlays/README | 4779 +++++++++++++++++ + .../arm/boot/dts/overlays/act-led-overlay.dts | 28 + + .../dts/overlays/adafruit-st7735r-overlay.dts | 83 + + .../boot/dts/overlays/adafruit18-overlay.dts | 55 + + .../dts/overlays/adau1977-adc-overlay.dts | 40 + + .../dts/overlays/adau7002-simple-overlay.dts | 52 + + .../arm/boot/dts/overlays/ads1015-overlay.dts | 98 + + .../arm/boot/dts/overlays/ads1115-overlay.dts | 103 + + .../arm/boot/dts/overlays/ads7846-overlay.dts | 89 + + .../boot/dts/overlays/adv7282m-overlay.dts | 73 + + .../boot/dts/overlays/adv728x-m-overlay.dts | 37 + + .../overlays/akkordion-iqdacplus-overlay.dts | 49 + + .../allo-boss-dac-pcm512x-audio-overlay.dts | 59 + + .../overlays/allo-boss2-dac-audio-overlay.dts | 57 + + .../dts/overlays/allo-digione-overlay.dts | 44 + + .../allo-katana-dac-audio-overlay.dts | 58 + + .../allo-piano-dac-pcm512x-audio-overlay.dts | 54 + + ...o-piano-dac-plus-pcm512x-audio-overlay.dts | 57 + + arch/arm/boot/dts/overlays/anyspi-overlay.dts | 205 + + .../boot/dts/overlays/apds9960-overlay.dts | 55 + + .../boot/dts/overlays/applepi-dac-overlay.dts | 57 + + .../dts/overlays/arducam-64mp-overlay.dts | 91 + + arch/arm/boot/dts/overlays/arducam-64mp.dtsi | 34 + + .../overlays/arducam-pivariety-overlay.dts | 94 + + .../boot/dts/overlays/at86rf233-overlay.dts | 57 + + .../overlays/audioinjector-addons-overlay.dts | 60 + + .../audioinjector-bare-i2s-overlay.dts | 50 + + ...dioinjector-isolated-soundcard-overlay.dts | 55 + + .../overlays/audioinjector-ultra-overlay.dts | 71 + + .../audioinjector-wm8731-audio-overlay.dts | 39 + + .../dts/overlays/audiosense-pi-overlay.dts | 82 + + .../boot/dts/overlays/audremap-overlay.dts | 38 + + .../boot/dts/overlays/balena-fin-overlay.dts | 125 + + .../dts/overlays/camera-mux-2port-overlay.dts | 505 ++ + .../dts/overlays/camera-mux-4port-overlay.dts | 876 +++ + .../arm/boot/dts/overlays/cap1106-overlay.dts | 52 + + .../boot/dts/overlays/chipdip-dac-overlay.dts | 46 + + .../dts/overlays/cirrus-wm5102-overlay.dts | 172 + + .../dts/overlays/cm-swap-i2c0-overlay.dts | 27 + + arch/arm/boot/dts/overlays/cma-overlay.dts | 36 + + .../crystalfontz-cfa050_pi_m-overlay.dts | 124 + + .../dts/overlays/cutiepi-panel-overlay.dts | 117 + + .../boot/dts/overlays/dacberry400-overlay.dts | 71 + + arch/arm/boot/dts/overlays/dht11-overlay.dts | 48 + + .../dts/overlays/dionaudio-kiwi-overlay.dts | 39 + + .../dts/overlays/dionaudio-loco-overlay.dts | 39 + + .../overlays/dionaudio-loco-v2-overlay.dts | 49 + + .../boot/dts/overlays/disable-bt-overlay.dts | 59 + + .../dts/overlays/disable-emmc2-overlay.dts | 13 + + .../dts/overlays/disable-wifi-overlay.dts | 20 + + arch/arm/boot/dts/overlays/dpi18-overlay.dts | 39 + + .../boot/dts/overlays/dpi18cpadhi-overlay.dts | 26 + + arch/arm/boot/dts/overlays/dpi24-overlay.dts | 39 + + arch/arm/boot/dts/overlays/draws-overlay.dts | 208 + + .../arm/boot/dts/overlays/dwc-otg-overlay.dts | 14 + + arch/arm/boot/dts/overlays/dwc2-overlay.dts | 26 + + .../boot/dts/overlays/edt-ft5406-overlay.dts | 46 + + arch/arm/boot/dts/overlays/edt-ft5406.dtsi | 54 + + .../boot/dts/overlays/enc28j60-overlay.dts | 53 + + .../dts/overlays/enc28j60-spi2-overlay.dts | 47 + + .../arm/boot/dts/overlays/exc3000-overlay.dts | 48 + + arch/arm/boot/dts/overlays/fbtft-overlay.dts | 611 +++ + .../boot/dts/overlays/fe-pi-audio-overlay.dts | 70 + + .../boot/dts/overlays/fsm-demo-overlay.dts | 104 + + arch/arm/boot/dts/overlays/gc9a01-overlay.dts | 151 + + .../boot/dts/overlays/ghost-amp-overlay.dts | 145 + + arch/arm/boot/dts/overlays/goodix-overlay.dts | 46 + + .../googlevoicehat-soundcard-overlay.dts | 49 + + .../dts/overlays/gpio-charger-overlay.dts | 42 + + .../boot/dts/overlays/gpio-fan-overlay.dts | 89 + + .../boot/dts/overlays/gpio-hog-overlay.dts | 27 + + .../arm/boot/dts/overlays/gpio-ir-overlay.dts | 49 + + .../boot/dts/overlays/gpio-ir-tx-overlay.dts | 36 + + .../boot/dts/overlays/gpio-key-overlay.dts | 48 + + .../boot/dts/overlays/gpio-led-overlay.dts | 97 + + .../overlays/gpio-no-bank0-irq-overlay.dts | 14 + + .../boot/dts/overlays/gpio-no-irq-overlay.dts | 14 + + .../dts/overlays/gpio-poweroff-overlay.dts | 39 + + .../dts/overlays/gpio-shutdown-overlay.dts | 86 + + .../boot/dts/overlays/hd44780-lcd-overlay.dts | 46 + + .../hdmi-backlight-hwhack-gpio-overlay.dts | 47 + + .../dts/overlays/hifiberry-amp-overlay.dts | 39 + + .../dts/overlays/hifiberry-amp100-overlay.dts | 64 + + .../dts/overlays/hifiberry-amp3-overlay.dts | 57 + + .../dts/overlays/hifiberry-dac-overlay.dts | 34 + + .../overlays/hifiberry-dacplus-overlay.dts | 65 + + .../overlays/hifiberry-dacplusadc-overlay.dts | 72 + + .../hifiberry-dacplusadcpro-overlay.dts | 70 + + .../overlays/hifiberry-dacplusdsp-overlay.dts | 34 + + .../overlays/hifiberry-dacplushd-overlay.dts | 94 + + .../dts/overlays/hifiberry-digi-overlay.dts | 41 + + .../overlays/hifiberry-digi-pro-overlay.dts | 43 + + .../boot/dts/overlays/highperi-overlay.dts | 63 + + arch/arm/boot/dts/overlays/hy28a-overlay.dts | 93 + + .../boot/dts/overlays/hy28b-2017-overlay.dts | 152 + + arch/arm/boot/dts/overlays/hy28b-overlay.dts | 148 + + .../boot/dts/overlays/i-sabre-q2m-overlay.dts | 39 + + .../boot/dts/overlays/i2c-bcm2708-overlay.dts | 13 + + .../arm/boot/dts/overlays/i2c-fan-overlay.dts | 108 + + .../boot/dts/overlays/i2c-gpio-overlay.dts | 47 + + .../arm/boot/dts/overlays/i2c-mux-overlay.dts | 173 + + .../dts/overlays/i2c-pwm-pca9685a-overlay.dts | 61 + + .../arm/boot/dts/overlays/i2c-rtc-common.dtsi | 353 ++ + .../dts/overlays/i2c-rtc-gpio-overlay.dts | 31 + + .../arm/boot/dts/overlays/i2c-rtc-overlay.dts | 42 + + .../boot/dts/overlays/i2c-sensor-common.dtsi | 562 ++ + .../boot/dts/overlays/i2c-sensor-overlay.dts | 42 + + arch/arm/boot/dts/overlays/i2c0-overlay.dts | 83 + + arch/arm/boot/dts/overlays/i2c1-overlay.dts | 44 + + arch/arm/boot/dts/overlays/i2c3-overlay.dts | 34 + + arch/arm/boot/dts/overlays/i2c4-overlay.dts | 34 + + arch/arm/boot/dts/overlays/i2c5-overlay.dts | 34 + + arch/arm/boot/dts/overlays/i2c6-overlay.dts | 34 + + .../arm/boot/dts/overlays/i2s-dac-overlay.dts | 34 + + .../dts/overlays/i2s-gpio28-31-overlay.dts | 18 + + .../boot/dts/overlays/ilitek251x-overlay.dts | 45 + + arch/arm/boot/dts/overlays/imx219-overlay.dts | 89 + + arch/arm/boot/dts/overlays/imx219.dtsi | 27 + + arch/arm/boot/dts/overlays/imx258-overlay.dts | 131 + + arch/arm/boot/dts/overlays/imx258.dtsi | 27 + + arch/arm/boot/dts/overlays/imx290-overlay.dts | 32 + + .../boot/dts/overlays/imx290_327-overlay.dtsi | 112 + + arch/arm/boot/dts/overlays/imx290_327.dtsi | 24 + + arch/arm/boot/dts/overlays/imx296-overlay.dts | 104 + + arch/arm/boot/dts/overlays/imx327-overlay.dts | 33 + + arch/arm/boot/dts/overlays/imx378-overlay.dts | 10 + + arch/arm/boot/dts/overlays/imx462-overlay.dts | 39 + + arch/arm/boot/dts/overlays/imx477-overlay.dts | 10 + + .../boot/dts/overlays/imx477_378-overlay.dtsi | 83 + + arch/arm/boot/dts/overlays/imx477_378.dtsi | 24 + + arch/arm/boot/dts/overlays/imx519-overlay.dts | 93 + + arch/arm/boot/dts/overlays/imx519.dtsi | 34 + + arch/arm/boot/dts/overlays/imx708-overlay.dts | 105 + + arch/arm/boot/dts/overlays/imx708.dtsi | 35 + + .../dts/overlays/iqaudio-codec-overlay.dts | 42 + + .../boot/dts/overlays/iqaudio-dac-overlay.dts | 46 + + .../dts/overlays/iqaudio-dacplus-overlay.dts | 49 + + .../iqaudio-digi-wm8804-audio-overlay.dts | 47 + + arch/arm/boot/dts/overlays/iqs550-overlay.dts | 59 + + .../arm/boot/dts/overlays/irs1125-overlay.dts | 90 + + .../dts/overlays/jedec-spi-nor-overlay.dts | 136 + + .../dts/overlays/justboom-both-overlay.dts | 65 + + .../dts/overlays/justboom-dac-overlay.dts | 46 + + .../dts/overlays/justboom-digi-overlay.dts | 41 + + .../arm/boot/dts/overlays/ltc294x-overlay.dts | 86 + + .../boot/dts/overlays/max98357a-overlay.dts | 84 + + .../boot/dts/overlays/maxtherm-overlay.dts | 186 + + .../boot/dts/overlays/mbed-dac-overlay.dts | 64 + + .../boot/dts/overlays/mcp23017-overlay.dts | 69 + + .../boot/dts/overlays/mcp23s17-overlay.dts | 732 +++ + .../dts/overlays/mcp2515-can0-overlay.dts | 73 + + .../dts/overlays/mcp2515-can1-overlay.dts | 73 + + .../arm/boot/dts/overlays/mcp2515-overlay.dts | 156 + + .../boot/dts/overlays/mcp251xfd-overlay.dts | 226 + + .../arm/boot/dts/overlays/mcp3008-overlay.dts | 205 + + .../arm/boot/dts/overlays/mcp3202-overlay.dts | 205 + + .../arm/boot/dts/overlays/mcp342x-overlay.dts | 164 + + .../dts/overlays/media-center-overlay.dts | 86 + + .../boot/dts/overlays/merus-amp-overlay.dts | 59 + + .../boot/dts/overlays/midi-uart0-overlay.dts | 36 + + .../boot/dts/overlays/midi-uart1-overlay.dts | 43 + + .../boot/dts/overlays/midi-uart2-overlay.dts | 37 + + .../boot/dts/overlays/midi-uart3-overlay.dts | 38 + + .../boot/dts/overlays/midi-uart4-overlay.dts | 38 + + .../boot/dts/overlays/midi-uart5-overlay.dts | 38 + + .../boot/dts/overlays/minipitft13-overlay.dts | 70 + + .../boot/dts/overlays/miniuart-bt-overlay.dts | 83 + + .../dts/overlays/mipi-dbi-spi-overlay.dts | 175 + + .../boot/dts/overlays/mlx90640-overlay.dts | 22 + + arch/arm/boot/dts/overlays/mmc-overlay.dts | 46 + + .../arm/boot/dts/overlays/mpu6050-overlay.dts | 29 + + .../arm/boot/dts/overlays/mz61581-overlay.dts | 117 + + arch/arm/boot/dts/overlays/ov2311-overlay.dts | 77 + + arch/arm/boot/dts/overlays/ov2311.dtsi | 26 + + arch/arm/boot/dts/overlays/ov5647-overlay.dts | 92 + + arch/arm/boot/dts/overlays/ov5647.dtsi | 25 + + arch/arm/boot/dts/overlays/ov7251-overlay.dts | 77 + + arch/arm/boot/dts/overlays/ov7251.dtsi | 28 + + arch/arm/boot/dts/overlays/ov9281-overlay.dts | 78 + + arch/arm/boot/dts/overlays/ov9281.dtsi | 27 + + arch/arm/boot/dts/overlays/overlay_map.dts | 223 + + .../arm/boot/dts/overlays/papirus-overlay.dts | 84 + + .../arm/boot/dts/overlays/pca953x-overlay.dts | 240 + + .../arm/boot/dts/overlays/pcf857x-overlay.dts | 32 + + .../dts/overlays/pcie-32bit-dma-overlay.dts | 38 + + arch/arm/boot/dts/overlays/pibell-overlay.dts | 81 + + .../dts/overlays/pifacedigital-overlay.dts | 144 + + .../arm/boot/dts/overlays/pifi-40-overlay.dts | 50 + + .../boot/dts/overlays/pifi-dac-hd-overlay.dts | 49 + + .../dts/overlays/pifi-dac-zero-overlay.dts | 49 + + .../dts/overlays/pifi-mini-210-overlay.dts | 42 + + arch/arm/boot/dts/overlays/piglow-overlay.dts | 97 + + .../boot/dts/overlays/piscreen-overlay.dts | 106 + + .../boot/dts/overlays/piscreen2r-overlay.dts | 106 + + .../arm/boot/dts/overlays/pisound-overlay.dts | 116 + + .../arm/boot/dts/overlays/pitft22-overlay.dts | 69 + + .../overlays/pitft28-capacitive-overlay.dts | 91 + + .../overlays/pitft28-resistive-overlay.dts | 120 + + .../overlays/pitft35-resistive-overlay.dts | 121 + + .../boot/dts/overlays/pps-gpio-overlay.dts | 39 + + .../boot/dts/overlays/proto-codec-overlay.dts | 39 + + .../boot/dts/overlays/pwm-2chan-overlay.dts | 49 + + .../boot/dts/overlays/pwm-ir-tx-overlay.dts | 40 + + arch/arm/boot/dts/overlays/pwm-overlay.dts | 45 + + arch/arm/boot/dts/overlays/pwm1-overlay.dts | 60 + + .../arm/boot/dts/overlays/qca7000-overlay.dts | 55 + + .../dts/overlays/qca7000-uart0-overlay.dts | 46 + + .../arm/boot/dts/overlays/ramoops-overlay.dts | 25 + + .../boot/dts/overlays/ramoops-pi4-overlay.dts | 25 + + .../dts/overlays/rotary-encoder-overlay.dts | 59 + + .../dts/overlays/rpi-backlight-overlay.dts | 21 + + .../dts/overlays/rpi-codeczero-overlay.dts | 9 + + .../boot/dts/overlays/rpi-dacplus-overlay.dts | 17 + + .../boot/dts/overlays/rpi-dacpro-overlay.dts | 17 + + .../dts/overlays/rpi-digiampplus-overlay.dts | 17 + + .../boot/dts/overlays/rpi-ft5406-overlay.dts | 25 + + .../arm/boot/dts/overlays/rpi-poe-overlay.dts | 154 + + .../dts/overlays/rpi-poe-plus-overlay.dts | 49 + + .../boot/dts/overlays/rpi-sense-overlay.dts | 47 + + .../dts/overlays/rpi-sense-v2-overlay.dts | 47 + + arch/arm/boot/dts/overlays/rpi-tv-overlay.dts | 34 + + .../rra-digidac1-wm8741-audio-overlay.dts | 49 + + .../boot/dts/overlays/sainsmart18-overlay.dts | 52 + + .../dts/overlays/sc16is750-i2c-overlay.dts | 43 + + .../dts/overlays/sc16is752-i2c-overlay.dts | 43 + + .../dts/overlays/sc16is752-spi0-overlay.dts | 49 + + .../dts/overlays/sc16is752-spi1-overlay.dts | 67 + + arch/arm/boot/dts/overlays/sdhost-overlay.dts | 38 + + arch/arm/boot/dts/overlays/sdio-overlay.dts | 77 + + .../overlays/seeed-can-fd-hat-v1-overlay.dts | 138 + + .../overlays/seeed-can-fd-hat-v2-overlay.dts | 117 + + .../boot/dts/overlays/sh1106-spi-overlay.dts | 84 + + .../boot/dts/overlays/si446x-spi0-overlay.dts | 53 + + .../arm/boot/dts/overlays/smi-dev-overlay.dts | 20 + + .../boot/dts/overlays/smi-nand-overlay.dts | 66 + + arch/arm/boot/dts/overlays/smi-overlay.dts | 37 + + .../dts/overlays/spi-gpio35-39-overlay.dts | 31 + + .../dts/overlays/spi-gpio40-45-overlay.dts | 36 + + .../arm/boot/dts/overlays/spi-rtc-overlay.dts | 75 + + .../boot/dts/overlays/spi0-0cs-overlay.dts | 39 + + .../boot/dts/overlays/spi0-1cs-overlay.dts | 42 + + .../boot/dts/overlays/spi0-2cs-overlay.dts | 37 + + .../boot/dts/overlays/spi1-1cs-overlay.dts | 57 + + .../boot/dts/overlays/spi1-2cs-overlay.dts | 69 + + .../boot/dts/overlays/spi1-3cs-overlay.dts | 81 + + .../boot/dts/overlays/spi2-1cs-overlay.dts | 57 + + .../boot/dts/overlays/spi2-2cs-overlay.dts | 69 + + .../boot/dts/overlays/spi2-3cs-overlay.dts | 81 + + .../boot/dts/overlays/spi3-1cs-overlay.dts | 42 + + .../boot/dts/overlays/spi3-2cs-overlay.dts | 54 + + .../boot/dts/overlays/spi4-1cs-overlay.dts | 42 + + .../boot/dts/overlays/spi4-2cs-overlay.dts | 54 + + .../boot/dts/overlays/spi5-1cs-overlay.dts | 42 + + .../boot/dts/overlays/spi5-2cs-overlay.dts | 54 + + .../boot/dts/overlays/spi6-1cs-overlay.dts | 42 + + .../boot/dts/overlays/spi6-2cs-overlay.dts | 54 + + .../arm/boot/dts/overlays/ssd1306-overlay.dts | 36 + + .../boot/dts/overlays/ssd1306-spi-overlay.dts | 85 + + .../boot/dts/overlays/ssd1331-spi-overlay.dts | 83 + + .../boot/dts/overlays/ssd1351-spi-overlay.dts | 83 + + .../dts/overlays/superaudioboard-overlay.dts | 73 + + arch/arm/boot/dts/overlays/sx150x-overlay.dts | 1706 ++++++ + .../dts/overlays/tc358743-audio-overlay.dts | 52 + + .../boot/dts/overlays/tc358743-overlay.dts | 109 + + .../boot/dts/overlays/tinylcd35-overlay.dts | 222 + + .../boot/dts/overlays/tpm-slb9670-overlay.dts | 44 + + .../boot/dts/overlays/tpm-slb9673-overlay.dts | 50 + + arch/arm/boot/dts/overlays/uart0-overlay.dts | 32 + + arch/arm/boot/dts/overlays/uart1-overlay.dts | 38 + + arch/arm/boot/dts/overlays/uart2-overlay.dts | 25 + + arch/arm/boot/dts/overlays/uart3-overlay.dts | 25 + + arch/arm/boot/dts/overlays/uart4-overlay.dts | 25 + + arch/arm/boot/dts/overlays/uart5-overlay.dts | 25 + + arch/arm/boot/dts/overlays/udrc-overlay.dts | 128 + + .../dts/overlays/ugreen-dabboard-overlay.dts | 49 + + .../boot/dts/overlays/upstream-overlay.dts | 101 + + .../dts/overlays/upstream-pi4-overlay.dts | 137 + + .../dts/overlays/vc4-fkms-v3d-overlay.dts | 40 + + .../dts/overlays/vc4-fkms-v3d-pi4-overlay.dts | 44 + + .../overlays/vc4-kms-dpi-generic-overlay.dts | 81 + + .../dts/overlays/vc4-kms-dpi-hyperpixel.dtsi | 94 + + .../vc4-kms-dpi-hyperpixel2r-overlay.dts | 114 + + .../vc4-kms-dpi-hyperpixel4-overlay.dts | 57 + + .../vc4-kms-dpi-hyperpixel4sq-overlay.dts | 36 + + .../overlays/vc4-kms-dpi-panel-overlay.dts | 69 + + arch/arm/boot/dts/overlays/vc4-kms-dpi.dtsi | 111 + + .../overlays/vc4-kms-dsi-7inch-overlay.dts | 118 + + .../vc4-kms-dsi-lt070me05000-overlay.dts | 69 + + .../vc4-kms-dsi-lt070me05000-v2-overlay.dts | 64 + + .../vc4-kms-dsi-waveshare-panel-overlay.dts | 123 + + .../overlays/vc4-kms-kippah-7inch-overlay.dts | 26 + + .../boot/dts/overlays/vc4-kms-v3d-overlay.dts | 124 + + .../dts/overlays/vc4-kms-v3d-pi4-overlay.dts | 200 + + .../dts/overlays/vc4-kms-vga666-overlay.dts | 100 + + arch/arm/boot/dts/overlays/vga666-overlay.dts | 30 + + arch/arm/boot/dts/overlays/vl805-overlay.dts | 18 + + .../arm/boot/dts/overlays/w1-gpio-overlay.dts | 40 + + .../dts/overlays/w1-gpio-pullup-overlay.dts | 42 + + arch/arm/boot/dts/overlays/w5500-overlay.dts | 63 + + .../overlays/watterott-display-overlay.dts | 150 + + .../waveshare-can-fd-hat-mode-a-overlay.dts | 140 + + .../waveshare-can-fd-hat-mode-b-overlay.dts | 103 + + .../arm/boot/dts/overlays/wittypi-overlay.dts | 44 + + .../dts/overlays/wm8960-soundcard-overlay.dts | 82 + + arch/arm64/boot/dts/Makefile | 2 + + arch/arm64/boot/dts/broadcom/Makefile | 14 + + .../boot/dts/broadcom/bcm2710-rpi-2-b.dts | 1 + + .../dts/broadcom/bcm2710-rpi-3-b-plus.dts | 1 + + .../boot/dts/broadcom/bcm2710-rpi-3-b.dts | 1 + + .../boot/dts/broadcom/bcm2710-rpi-cm3.dts | 1 + + .../dts/broadcom/bcm2710-rpi-zero-2-w.dts | 1 + + .../boot/dts/broadcom/bcm2710-rpi-zero-2.dts | 1 + + .../boot/dts/broadcom/bcm2711-rpi-cm4.dts | 1 + + .../boot/dts/broadcom/bcm2711-rpi-cm4s.dts | 1 + + .../dts/broadcom/bcm283x-rpi-csi1-2lane.dtsi | 1 + + .../dts/broadcom/bcm283x-rpi-lan7515.dtsi | 1 + + arch/arm64/boot/dts/overlays | 1 + + include/dt-bindings/gpio/gpio-fsm.h | 21 + + scripts/Makefile.dtbinst | 5 +- + scripts/Makefile.lib | 13 + + 358 files changed, 35486 insertions(+), 5 deletions(-) + create mode 100644 arch/arm/boot/dts/broadcom/bcm2708-rpi-b-plus.dts + create mode 100644 arch/arm/boot/dts/broadcom/bcm2708-rpi-b-rev1.dts + create mode 100644 arch/arm/boot/dts/broadcom/bcm2708-rpi-b.dts + create mode 100644 arch/arm/boot/dts/broadcom/bcm2708-rpi-bt.dtsi + create mode 100644 arch/arm/boot/dts/broadcom/bcm2708-rpi-cm.dts + create mode 100644 arch/arm/boot/dts/broadcom/bcm2708-rpi-cm.dtsi + create mode 100644 arch/arm/boot/dts/broadcom/bcm2708-rpi-zero-w.dts + create mode 100644 arch/arm/boot/dts/broadcom/bcm2708-rpi-zero.dts + create mode 100644 arch/arm/boot/dts/broadcom/bcm2708-rpi.dtsi + create mode 100644 arch/arm/boot/dts/broadcom/bcm2708.dtsi + create mode 100644 arch/arm/boot/dts/broadcom/bcm2709-rpi-2-b.dts + create mode 100644 arch/arm/boot/dts/broadcom/bcm2709-rpi-cm2.dts + create mode 100644 arch/arm/boot/dts/broadcom/bcm2709-rpi.dtsi + create mode 100644 arch/arm/boot/dts/broadcom/bcm2709.dtsi + create mode 100644 arch/arm/boot/dts/broadcom/bcm270x-rpi.dtsi + create mode 100644 arch/arm/boot/dts/broadcom/bcm270x.dtsi + create mode 100644 arch/arm/boot/dts/broadcom/bcm2710-rpi-2-b.dts + create mode 100644 arch/arm/boot/dts/broadcom/bcm2710-rpi-3-b-plus.dts + create mode 100644 arch/arm/boot/dts/broadcom/bcm2710-rpi-3-b.dts + create mode 100644 arch/arm/boot/dts/broadcom/bcm2710-rpi-cm3.dts + create mode 100644 arch/arm/boot/dts/broadcom/bcm2710-rpi-zero-2-w.dts + create mode 100644 arch/arm/boot/dts/broadcom/bcm2710-rpi-zero-2.dts + create mode 100644 arch/arm/boot/dts/broadcom/bcm2710.dtsi + create mode 100644 arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4.dts + create mode 100644 arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4s.dts + create mode 100644 arch/arm/boot/dts/broadcom/bcm2711-rpi-ds.dtsi + create mode 100644 arch/arm/boot/dts/broadcom/bcm271x-rpi-bt.dtsi + create mode 100644 arch/arm/boot/dts/broadcom/bcm283x-rpi-csi0-2lane.dtsi + create mode 100644 arch/arm/boot/dts/broadcom/bcm283x-rpi-csi1-2lane.dtsi + create mode 100644 arch/arm/boot/dts/broadcom/bcm283x-rpi-csi1-4lane.dtsi + create mode 100644 arch/arm/boot/dts/broadcom/bcm283x-rpi-i2c0mux_0_28.dtsi + create mode 100644 arch/arm/boot/dts/broadcom/bcm283x-rpi-i2c0mux_0_44.dtsi + create mode 100644 arch/arm/boot/dts/overlays/Makefile + create mode 100644 arch/arm/boot/dts/overlays/README + create mode 100644 arch/arm/boot/dts/overlays/act-led-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/adafruit-st7735r-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/adafruit18-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/adau1977-adc-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/adau7002-simple-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/ads1015-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/ads1115-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/ads7846-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/adv7282m-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/adv728x-m-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/akkordion-iqdacplus-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/allo-boss-dac-pcm512x-audio-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/allo-boss2-dac-audio-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/allo-digione-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/allo-katana-dac-audio-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/allo-piano-dac-pcm512x-audio-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/allo-piano-dac-plus-pcm512x-audio-overlay.dts + create mode 100755 arch/arm/boot/dts/overlays/anyspi-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/apds9960-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/applepi-dac-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/arducam-64mp-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/arducam-64mp.dtsi + create mode 100644 arch/arm/boot/dts/overlays/arducam-pivariety-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/at86rf233-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/audioinjector-addons-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/audioinjector-bare-i2s-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/audioinjector-isolated-soundcard-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/audioinjector-ultra-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/audioinjector-wm8731-audio-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/audiosense-pi-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/audremap-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/balena-fin-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/camera-mux-2port-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/camera-mux-4port-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/cap1106-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/chipdip-dac-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/cirrus-wm5102-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/cm-swap-i2c0-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/cma-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/crystalfontz-cfa050_pi_m-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/cutiepi-panel-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/dacberry400-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/dht11-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/dionaudio-kiwi-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/dionaudio-loco-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/dionaudio-loco-v2-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/disable-bt-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/disable-emmc2-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/disable-wifi-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/dpi18-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/dpi18cpadhi-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/dpi24-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/draws-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/dwc-otg-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/dwc2-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/edt-ft5406-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/edt-ft5406.dtsi + create mode 100644 arch/arm/boot/dts/overlays/enc28j60-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/enc28j60-spi2-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/exc3000-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/fbtft-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/fe-pi-audio-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/fsm-demo-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/gc9a01-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/ghost-amp-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/goodix-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/googlevoicehat-soundcard-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/gpio-charger-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/gpio-fan-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/gpio-hog-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/gpio-ir-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/gpio-ir-tx-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/gpio-key-overlay.dts + create mode 100755 arch/arm/boot/dts/overlays/gpio-led-overlay.dts + create mode 100755 arch/arm/boot/dts/overlays/gpio-no-bank0-irq-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/gpio-no-irq-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/gpio-poweroff-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/gpio-shutdown-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/hd44780-lcd-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/hdmi-backlight-hwhack-gpio-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/hifiberry-amp-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/hifiberry-amp100-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/hifiberry-amp3-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/hifiberry-dac-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/hifiberry-dacplus-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/hifiberry-dacplusadc-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/hifiberry-dacplusadcpro-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/hifiberry-dacplusdsp-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/hifiberry-dacplushd-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/hifiberry-digi-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/hifiberry-digi-pro-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/highperi-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/hy28a-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/hy28b-2017-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/hy28b-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i-sabre-q2m-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i2c-bcm2708-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i2c-fan-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i2c-gpio-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i2c-mux-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i2c-pwm-pca9685a-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i2c-rtc-common.dtsi + create mode 100644 arch/arm/boot/dts/overlays/i2c-rtc-gpio-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts + create mode 100755 arch/arm/boot/dts/overlays/i2c-sensor-common.dtsi + create mode 100755 arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i2c0-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i2c1-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i2c3-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i2c4-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i2c5-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i2c6-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i2s-dac-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i2s-gpio28-31-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/ilitek251x-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/imx219-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/imx219.dtsi + create mode 100644 arch/arm/boot/dts/overlays/imx258-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/imx258.dtsi + create mode 100644 arch/arm/boot/dts/overlays/imx290-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/imx290_327-overlay.dtsi + create mode 100644 arch/arm/boot/dts/overlays/imx290_327.dtsi + create mode 100644 arch/arm/boot/dts/overlays/imx296-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/imx327-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/imx378-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/imx462-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/imx477-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/imx477_378-overlay.dtsi + create mode 100644 arch/arm/boot/dts/overlays/imx477_378.dtsi + create mode 100644 arch/arm/boot/dts/overlays/imx519-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/imx519.dtsi + create mode 100644 arch/arm/boot/dts/overlays/imx708-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/imx708.dtsi + create mode 100644 arch/arm/boot/dts/overlays/iqaudio-codec-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/iqaudio-dac-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/iqaudio-dacplus-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/iqaudio-digi-wm8804-audio-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/iqs550-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/irs1125-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/jedec-spi-nor-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/justboom-both-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/justboom-dac-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/justboom-digi-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/ltc294x-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/max98357a-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/maxtherm-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/mbed-dac-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/mcp23017-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/mcp23s17-overlay.dts + create mode 100755 arch/arm/boot/dts/overlays/mcp2515-can0-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/mcp2515-can1-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/mcp2515-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/mcp251xfd-overlay.dts + create mode 100755 arch/arm/boot/dts/overlays/mcp3008-overlay.dts + create mode 100755 arch/arm/boot/dts/overlays/mcp3202-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/mcp342x-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/media-center-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/merus-amp-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/midi-uart0-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/midi-uart1-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/midi-uart2-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/midi-uart3-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/midi-uart4-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/midi-uart5-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/minipitft13-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/miniuart-bt-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/mipi-dbi-spi-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/mlx90640-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/mmc-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/mpu6050-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/mz61581-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/ov2311-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/ov2311.dtsi + create mode 100644 arch/arm/boot/dts/overlays/ov5647-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/ov5647.dtsi + create mode 100644 arch/arm/boot/dts/overlays/ov7251-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/ov7251.dtsi + create mode 100644 arch/arm/boot/dts/overlays/ov9281-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/ov9281.dtsi + create mode 100644 arch/arm/boot/dts/overlays/overlay_map.dts + create mode 100644 arch/arm/boot/dts/overlays/papirus-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pca953x-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pcf857x-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pcie-32bit-dma-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pibell-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pifacedigital-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pifi-40-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pifi-dac-hd-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pifi-dac-zero-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pifi-mini-210-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/piglow-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/piscreen-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/piscreen2r-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pisound-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pitft22-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pitft28-capacitive-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pitft28-resistive-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pitft35-resistive-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pps-gpio-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/proto-codec-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pwm-2chan-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pwm-ir-tx-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pwm-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pwm1-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/qca7000-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/qca7000-uart0-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/ramoops-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/ramoops-pi4-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/rotary-encoder-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/rpi-backlight-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/rpi-codeczero-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/rpi-dacplus-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/rpi-dacpro-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/rpi-digiampplus-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/rpi-ft5406-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/rpi-poe-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/rpi-poe-plus-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/rpi-sense-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/rpi-sense-v2-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/rpi-tv-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/rra-digidac1-wm8741-audio-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/sainsmart18-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/sc16is750-i2c-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/sc16is752-i2c-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/sc16is752-spi0-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/sc16is752-spi1-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/sdhost-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/sdio-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/seeed-can-fd-hat-v1-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/seeed-can-fd-hat-v2-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/sh1106-spi-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/si446x-spi0-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/smi-dev-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/smi-nand-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/smi-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi-gpio35-39-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi-gpio40-45-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi-rtc-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi0-0cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi0-1cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi0-2cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi1-1cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi1-2cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi1-3cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi2-1cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi2-2cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi2-3cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi3-1cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi3-2cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi4-1cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi4-2cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi5-1cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi5-2cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi6-1cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi6-2cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/ssd1306-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/ssd1306-spi-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/ssd1331-spi-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/ssd1351-spi-overlay.dts + create mode 100755 arch/arm/boot/dts/overlays/superaudioboard-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/sx150x-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/tc358743-audio-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/tc358743-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/tinylcd35-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/tpm-slb9670-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/tpm-slb9673-overlay.dts + create mode 100755 arch/arm/boot/dts/overlays/uart0-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/uart1-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/uart2-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/uart3-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/uart4-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/uart5-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/udrc-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/ugreen-dabboard-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/upstream-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/upstream-pi4-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/vc4-fkms-v3d-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/vc4-fkms-v3d-pi4-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-dpi-generic-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-dpi-hyperpixel.dtsi + create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-dpi-hyperpixel2r-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-dpi-hyperpixel4-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-dpi-hyperpixel4sq-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-dpi-panel-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-dpi.dtsi + create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-dsi-7inch-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-dsi-lt070me05000-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-dsi-lt070me05000-v2-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-dsi-waveshare-panel-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-kippah-7inch-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-v3d-pi4-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-vga666-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/vga666-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/vl805-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/w1-gpio-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/w1-gpio-pullup-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/w5500-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/watterott-display-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/waveshare-can-fd-hat-mode-a-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/waveshare-can-fd-hat-mode-b-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/wittypi-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/wm8960-soundcard-overlay.dts + create mode 100644 arch/arm64/boot/dts/broadcom/bcm2710-rpi-2-b.dts + create mode 100644 arch/arm64/boot/dts/broadcom/bcm2710-rpi-3-b-plus.dts + create mode 100644 arch/arm64/boot/dts/broadcom/bcm2710-rpi-3-b.dts + create mode 100644 arch/arm64/boot/dts/broadcom/bcm2710-rpi-cm3.dts + create mode 100644 arch/arm64/boot/dts/broadcom/bcm2710-rpi-zero-2-w.dts + create mode 100644 arch/arm64/boot/dts/broadcom/bcm2710-rpi-zero-2.dts + create mode 100644 arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4.dts + create mode 100644 arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4s.dts + create mode 120000 arch/arm64/boot/dts/broadcom/bcm283x-rpi-csi1-2lane.dtsi + create mode 120000 arch/arm64/boot/dts/broadcom/bcm283x-rpi-lan7515.dtsi + create mode 120000 arch/arm64/boot/dts/overlays + create mode 100644 include/dt-bindings/gpio/gpio-fsm.h + +diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile +index efe38eb25301..a2a407fb5b28 100644 +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -39,3 +39,8 @@ subdir-y += unisoc + subdir-y += vt8500 + subdir-y += xen + subdir-y += xilinx ++ ++targets += dtbs dtbs_install ++targets += $(dtb-y) ++ ++subdir-y += overlays +diff --git a/arch/arm/boot/dts/broadcom/Makefile b/arch/arm/boot/dts/broadcom/Makefile +index 7099d9560033..4af351c7f7b2 100644 +--- a/arch/arm/boot/dts/broadcom/Makefile ++++ b/arch/arm/boot/dts/broadcom/Makefile +@@ -35,6 +35,41 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ + bcm2711-rpi-cm4-io.dtb \ + bcm2835-rpi-zero.dtb \ + bcm2835-rpi-zero-w.dtb ++ ++DTC_FLAGS_bcm2708-rpi-b := -@ ++DTC_FLAGS_bcm2708-rpi-b-rev1 := -@ ++DTC_FLAGS_bcm2708-rpi-b-plus := -@ ++DTC_FLAGS_bcm2708-rpi-cm := -@ ++DTC_FLAGS_bcm2708-rpi-zero := -@ ++DTC_FLAGS_bcm2708-rpi-zero-w := -@ ++DTC_FLAGS_bcm2710-rpi-zero-2 := -@ ++DTC_FLAGS_bcm2710-rpi-zero-2-w := -@ ++DTC_FLAGS_bcm2709-rpi-2-b := -@ ++DTC_FLAGS_bcm2710-rpi-2-b := -@ ++DTC_FLAGS_bcm2710-rpi-3-b := -@ ++DTC_FLAGS_bcm2710-rpi-3-b-plus := -@ ++DTC_FLAGS_bcm2709-rpi-cm2 := -@ ++DTC_FLAGS_bcm2710-rpi-cm3 := -@ ++DTC_FLAGS_bcm2711-rpi-cm4 := -@ ++DTC_FLAGS_bcm2711-rpi-cm4s := -@ ++dtb-$(CONFIG_ARCH_BCM2835) += \ ++ bcm2708-rpi-b.dtb \ ++ bcm2708-rpi-b-rev1.dtb \ ++ bcm2708-rpi-b-plus.dtb \ ++ bcm2708-rpi-cm.dtb \ ++ bcm2708-rpi-zero.dtb \ ++ bcm2708-rpi-zero-w.dtb \ ++ bcm2710-rpi-zero-2.dtb \ ++ bcm2710-rpi-zero-2-w.dtb \ ++ bcm2709-rpi-2-b.dtb \ ++ bcm2710-rpi-2-b.dtb \ ++ bcm2710-rpi-3-b.dtb \ ++ bcm2710-rpi-3-b-plus.dtb \ ++ bcm2709-rpi-cm2.dtb \ ++ bcm2710-rpi-cm3.dtb \ ++ bcm2711-rpi-cm4.dtb \ ++ bcm2711-rpi-cm4s.dtb ++ + dtb-$(CONFIG_ARCH_BCMBCA) += \ + bcm947622.dtb \ + bcm963138.dtb \ +diff --git a/arch/arm/boot/dts/broadcom/bcm2708-rpi-b-plus.dts b/arch/arm/boot/dts/broadcom/bcm2708-rpi-b-plus.dts +new file mode 100644 +index 000000000000..b317e83b7efe +--- /dev/null ++++ b/arch/arm/boot/dts/broadcom/bcm2708-rpi-b-plus.dts +@@ -0,0 +1,208 @@ ++/dts-v1/; ++ ++#include "bcm2708.dtsi" ++#include "bcm2708-rpi.dtsi" ++#include "bcm283x-rpi-smsc9514.dtsi" ++#include "bcm283x-rpi-csi1-2lane.dtsi" ++#include "bcm283x-rpi-i2c0mux_0_28.dtsi" ++#include "bcm283x-rpi-led-deprecated.dtsi" ++ ++/ { ++ compatible = "raspberrypi,model-b-plus", "brcm,bcm2835"; ++ model = "Raspberry Pi Model B+"; ++}; ++ ++&gpio { ++ /* ++ * Taken from Raspberry-Pi-B-Plus-V1.2-Schematics.pdf ++ * RPI-BPLUS sheet 1 ++ * ++ * Legend: ++ * "NC" = not connected (no rail from the SoC) ++ * "FOO" = GPIO line named "FOO" on the schematic ++ * "FOO_N" = GPIO line named "FOO" on schematic, active low ++ */ ++ gpio-line-names = "ID_SDA", ++ "ID_SCL", ++ "SDA1", ++ "SCL1", ++ "GPIO_GCLK", ++ "GPIO5", ++ "GPIO6", ++ "SPI_CE1_N", ++ "SPI_CE0_N", ++ "SPI_MISO", ++ "SPI_MOSI", ++ "SPI_SCLK", ++ "GPIO12", ++ "GPIO13", ++ /* Serial port */ ++ "TXD0", ++ "RXD0", ++ "GPIO16", ++ "GPIO17", ++ "GPIO18", ++ "GPIO19", ++ "GPIO20", ++ "GPIO21", ++ "GPIO22", ++ "GPIO23", ++ "GPIO24", ++ "GPIO25", ++ "GPIO26", ++ "GPIO27", ++ "SDA0", ++ "SCL0", ++ "NC", /* GPIO30 */ ++ "LAN_RUN", /* GPIO31 */ ++ "CAM_GPIO1", /* GPIO32 */ ++ "NC", /* GPIO33 */ ++ "NC", /* GPIO34 */ ++ "PWR_LOW_N", /* GPIO35 */ ++ "NC", /* GPIO36 */ ++ "NC", /* GPIO37 */ ++ "USB_LIMIT", /* GPIO38 */ ++ "NC", /* GPIO39 */ ++ "PWM0_OUT", /* GPIO40 */ ++ "CAM_GPIO0", /* GPIO41 */ ++ "NC", /* GPIO42 */ ++ "NC", /* GPIO43 */ ++ "ETH_CLK", /* GPIO44 */ ++ "PWM1_OUT", /* GPIO45 */ ++ "HDMI_HPD_N", ++ "STATUS_LED", ++ /* Used by SD Card */ ++ "SD_CLK_R", ++ "SD_CMD_R", ++ "SD_DATA0_R", ++ "SD_DATA1_R", ++ "SD_DATA2_R", ++ "SD_DATA3_R"; ++ ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins = <40 45>; ++ brcm,function = <4>; ++ brcm,pull = <0>; ++ }; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++}; ++ ++&i2c0if { ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&led_act { ++ gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; ++ default-state = "off"; ++ linux,default-trigger = "mmc0"; ++}; ++ ++&leds { ++ led_pwr: led-pwr { ++ label = "PWR"; ++ gpios = <&gpio 35 GPIO_ACTIVE_HIGH>; ++ default-state = "off"; ++ linux,default-trigger = "input"; ++ }; ++}; ++ ++&hdmi { ++ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; ++}; ++ ++&vchiq { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++&cam1_reg { ++ gpio = <&gpio 41 GPIO_ACTIVE_HIGH>; ++}; ++ ++cam0_reg: &cam_dummy_reg { ++}; ++ ++i2c_arm: &i2c1 { ++}; ++ ++i2c_vc: &i2c0 { ++}; ++ ++/ { ++ __overrides__ { ++ audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=0'}"; ++ ++ act_led_gpio = <&led_act>,"gpios:4"; ++ act_led_activelow = <&led_act>,"gpios:8"; ++ act_led_trigger = <&led_act>,"linux,default-trigger"; ++ ++ pwr_led_gpio = <&led_pwr>,"gpios:4"; ++ pwr_led_activelow = <&led_pwr>,"gpios:8"; ++ pwr_led_trigger = <&led_pwr>,"linux,default-trigger"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/broadcom/bcm2708-rpi-b-rev1.dts b/arch/arm/boot/dts/broadcom/bcm2708-rpi-b-rev1.dts +new file mode 100644 +index 000000000000..228fd470b619 +--- /dev/null ++++ b/arch/arm/boot/dts/broadcom/bcm2708-rpi-b-rev1.dts +@@ -0,0 +1,220 @@ ++/dts-v1/; ++ ++#include "bcm2708.dtsi" ++#include "bcm2708-rpi.dtsi" ++#include "bcm283x-rpi-smsc9512.dtsi" ++#include "bcm283x-rpi-csi1-2lane.dtsi" ++#include "bcm283x-rpi-led-deprecated.dtsi" ++ ++/ { ++ compatible = "raspberrypi,model-b", "brcm,bcm2835"; ++ model = "Raspberry Pi Model B"; ++}; ++ ++&gpio { ++ /* ++ * Taken from Raspberry-Pi-Rev-1.0-Model-AB-Schematics.pdf ++ * RPI00021 sheet 02 ++ * ++ * Legend: ++ * "NC" = not connected (no rail from the SoC) ++ * "FOO" = GPIO line named "FOO" on the schematic ++ * "FOO_N" = GPIO line named "FOO" on schematic, active low ++ */ ++ gpio-line-names = "SDA0", ++ "SCL0", ++ "SDA1", ++ "SCL1", ++ "GPIO_GCLK", ++ "CAM_GPIO1", ++ "LAN_RUN", ++ "SPI_CE1_N", ++ "SPI_CE0_N", ++ "SPI_MISO", ++ "SPI_MOSI", ++ "SPI_SCLK", ++ "NC", /* GPIO12 */ ++ "NC", /* GPIO13 */ ++ /* Serial port */ ++ "TXD0", ++ "RXD0", ++ "STATUS_LED_N", ++ "GPIO17", ++ "GPIO18", ++ "NC", /* GPIO19 */ ++ "NC", /* GPIO20 */ ++ "GPIO21", ++ "GPIO22", ++ "GPIO23", ++ "GPIO24", ++ "GPIO25", ++ "NC", /* GPIO26 */ ++ "CAM_GPIO0", ++ /* Binary number representing build/revision */ ++ "CONFIG0", ++ "CONFIG1", ++ "CONFIG2", ++ "CONFIG3", ++ "NC", /* GPIO32 */ ++ "NC", /* GPIO33 */ ++ "NC", /* GPIO34 */ ++ "NC", /* GPIO35 */ ++ "NC", /* GPIO36 */ ++ "NC", /* GPIO37 */ ++ "NC", /* GPIO38 */ ++ "NC", /* GPIO39 */ ++ "PWM0_OUT", ++ "NC", /* GPIO41 */ ++ "NC", /* GPIO42 */ ++ "NC", /* GPIO43 */ ++ "NC", /* GPIO44 */ ++ "PWM1_OUT", ++ "HDMI_HPD_P", ++ "SD_CARD_DET", ++ /* Used by SD Card */ ++ "SD_CLK_R", ++ "SD_CMD_R", ++ "SD_DATA0_R", ++ "SD_DATA1_R", ++ "SD_DATA2_R", ++ "SD_DATA3_R"; ++ ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <28 29 30 31>; ++ brcm,function = <6>; /* alt2 */ ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins = <40 45>; ++ brcm,function = <4>; ++ brcm,pull = <0>; ++ }; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++}; ++ ++/delete-node/ &i2c0mux; ++ ++i2c0: &i2c0if { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c0_pins>; ++ clock-frequency = <100000>; ++}; ++ ++i2c_csi_dsi: &i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++/ { ++ aliases { ++ i2c0 = &i2c0; ++ }; ++ ++ /* Provide an i2c0mux label to avoid undefined symbols in overlays */ ++ i2c0mux: i2c0mux { ++ }; ++ ++ __overrides__ { ++ i2c0 = <&i2c0>, "status"; ++ }; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&led_act { ++ gpios = <&gpio 16 GPIO_ACTIVE_LOW>; ++ default-state = "off"; ++ linux,default-trigger = "mmc0"; ++}; ++ ++&hdmi { ++ hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; ++}; ++ ++&vchiq { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++&cam1_reg { ++ gpio = <&gpio 27 GPIO_ACTIVE_HIGH>; ++}; ++ ++cam0_reg: &cam_dummy_reg { ++}; ++ ++i2c_arm: &i2c0 { ++}; ++ ++i2c_vc: &i2c1 { ++}; ++ ++/ { ++ __overrides__ { ++ audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=0'}"; ++ ++ act_led_gpio = <&led_act>,"gpios:4"; ++ act_led_activelow = <&led_act>,"gpios:8"; ++ act_led_trigger = <&led_act>,"linux,default-trigger"; ++ ++ i2c = <&i2c0>,"status"; ++ i2c_arm = <&i2c0>,"status"; ++ i2c_vc = <&i2c1>,"status"; ++ i2c_baudrate = <&i2c0>,"clock-frequency:0"; ++ i2c_arm_baudrate = <&i2c0>,"clock-frequency:0"; ++ i2c_vc_baudrate = <&i2c1>,"clock-frequency:0"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/broadcom/bcm2708-rpi-b.dts b/arch/arm/boot/dts/broadcom/bcm2708-rpi-b.dts +new file mode 100644 +index 000000000000..1df74d5aa73c +--- /dev/null ++++ b/arch/arm/boot/dts/broadcom/bcm2708-rpi-b.dts +@@ -0,0 +1,195 @@ ++/dts-v1/; ++ ++#include "bcm2708.dtsi" ++#include "bcm2708-rpi.dtsi" ++#include "bcm283x-rpi-smsc9512.dtsi" ++#include "bcm283x-rpi-csi1-2lane.dtsi" ++#include "bcm283x-rpi-i2c0mux_0_28.dtsi" ++#include "bcm283x-rpi-led-deprecated.dtsi" ++ ++/ { ++ compatible = "raspberrypi,model-b", "brcm,bcm2835"; ++ model = "Raspberry Pi Model B"; ++}; ++ ++&gpio { ++ /* ++ * Taken from Raspberry-Pi-Rev-2.0-Model-AB-Schematics.pdf ++ * RPI00022 sheet 02 ++ * ++ * Legend: ++ * "NC" = not connected (no rail from the SoC) ++ * "FOO" = GPIO line named "FOO" on the schematic ++ * "FOO_N" = GPIO line named "FOO" on schematic, active low ++ */ ++ gpio-line-names = "SDA0", ++ "SCL0", ++ "SDA1", ++ "SCL1", ++ "GPIO_GCLK", ++ "CAM_GPIO1", ++ "LAN_RUN", ++ "SPI_CE1_N", ++ "SPI_CE0_N", ++ "SPI_MISO", ++ "SPI_MOSI", ++ "SPI_SCLK", ++ "NC", /* GPIO12 */ ++ "NC", /* GPIO13 */ ++ /* Serial port */ ++ "TXD0", ++ "RXD0", ++ "STATUS_LED_N", ++ "GPIO17", ++ "GPIO18", ++ "NC", /* GPIO19 */ ++ "NC", /* GPIO20 */ ++ "CAM_GPIO0", ++ "GPIO22", ++ "GPIO23", ++ "GPIO24", ++ "GPIO25", ++ "NC", /* GPIO26 */ ++ "GPIO27", ++ "GPIO28", ++ "GPIO29", ++ "GPIO30", ++ "GPIO31", ++ "NC", /* GPIO32 */ ++ "NC", /* GPIO33 */ ++ "NC", /* GPIO34 */ ++ "NC", /* GPIO35 */ ++ "NC", /* GPIO36 */ ++ "NC", /* GPIO37 */ ++ "NC", /* GPIO38 */ ++ "NC", /* GPIO39 */ ++ "PWM0_OUT", ++ "NC", /* GPIO41 */ ++ "NC", /* GPIO42 */ ++ "NC", /* GPIO43 */ ++ "NC", /* GPIO44 */ ++ "PWM1_OUT", ++ "HDMI_HPD_P", ++ "SD_CARD_DET", ++ /* Used by SD Card */ ++ "SD_CLK_R", ++ "SD_CMD_R", ++ "SD_DATA0_R", ++ "SD_DATA1_R", ++ "SD_DATA2_R", ++ "SD_DATA3_R"; ++ ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <28 29 30 31>; ++ brcm,function = <6>; /* alt2 */ ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins = <40 45>; ++ brcm,function = <4>; ++ brcm,pull = <0>; ++ }; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++}; ++ ++&i2c0if { ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&led_act { ++ gpios = <&gpio 16 GPIO_ACTIVE_LOW>; ++ default-state = "off"; ++ linux,default-trigger = "mmc0"; ++}; ++ ++&hdmi { ++ hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; ++}; ++ ++&vchiq { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++&cam1_reg { ++ gpio = <&gpio 21 GPIO_ACTIVE_HIGH>; ++}; ++ ++cam0_reg: &cam_dummy_reg { ++}; ++ ++i2c_arm: &i2c1 { ++}; ++ ++i2c_vc: &i2c0 { ++}; ++ ++/ { ++ __overrides__ { ++ audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=0'}"; ++ ++ act_led_gpio = <&led_act>,"gpios:4"; ++ act_led_activelow = <&led_act>,"gpios:8"; ++ act_led_trigger = <&led_act>,"linux,default-trigger"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/broadcom/bcm2708-rpi-bt.dtsi b/arch/arm/boot/dts/broadcom/bcm2708-rpi-bt.dtsi +new file mode 100644 +index 000000000000..98555528adae +--- /dev/null ++++ b/arch/arm/boot/dts/broadcom/bcm2708-rpi-bt.dtsi +@@ -0,0 +1,38 @@ ++// SPDX-License-Identifier: GPL-2.0 ++ ++&uart0 { ++ bt: bluetooth { ++ compatible = "brcm,bcm43438-bt"; ++ max-speed = <3000000>; ++ shutdown-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>; ++ local-bd-address = [ 00 00 00 00 00 00 ]; ++ fallback-bd-address; // Don't override a valid address ++ status = "okay"; ++ }; ++}; ++ ++&uart1 { ++ minibt: bluetooth { ++ compatible = "brcm,bcm43438-bt"; ++ max-speed = <230400>; ++ shutdown-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>; ++ local-bd-address = [ 00 00 00 00 00 00 ]; ++ fallback-bd-address; // Don't override a valid address ++ status = "disabled"; ++ }; ++}; ++ ++/ { ++ aliases { ++ bluetooth = &bt; ++ }; ++ ++ __overrides__ { ++ bdaddr = <&bt>,"local-bd-address[", ++ <&bt>,"fallback-bd-address?=0", ++ <&minibt>,"local-bd-address[", ++ <&minibt>,"fallback-bd-address?=0"; ++ krnbt = <&bt>,"status"; ++ krnbt_baudrate = <&bt>,"max-speed:0", <&minibt>,"max-speed:0"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/broadcom/bcm2708-rpi-cm.dts b/arch/arm/boot/dts/broadcom/bcm2708-rpi-cm.dts +new file mode 100644 +index 000000000000..6f7fea058aba +--- /dev/null ++++ b/arch/arm/boot/dts/broadcom/bcm2708-rpi-cm.dts +@@ -0,0 +1,171 @@ ++/dts-v1/; ++ ++#include "bcm2708-rpi-cm.dtsi" ++#include "bcm283x-rpi-csi0-2lane.dtsi" ++#include "bcm283x-rpi-csi1-4lane.dtsi" ++#include "bcm283x-rpi-i2c0mux_0_28.dtsi" ++ ++/ { ++ compatible = "raspberrypi,compute-module", "brcm,bcm2835"; ++ model = "Raspberry Pi Compute Module"; ++}; ++ ++&cam1_reg { ++ gpio = <&gpio 3 GPIO_ACTIVE_HIGH>; ++ status = "disabled"; ++}; ++ ++cam0_reg: &cam0_regulator { ++ gpio = <&gpio 31 GPIO_ACTIVE_HIGH>; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; ++ ++&gpio { ++ /* ++ * This is based on the official GPU firmware DT blob. ++ * ++ * Legend: ++ * "NC" = not connected (no rail from the SoC) ++ * "FOO" = GPIO line named "FOO" on the schematic ++ * "FOO_N" = GPIO line named "FOO" on schematic, active low ++ */ ++ gpio-line-names = "GPIO0", ++ "GPIO1", ++ "GPIO2", ++ "GPIO3", ++ "GPIO4", ++ "GPIO5", ++ "GPIO6", ++ "GPIO7", ++ "GPIO8", ++ "GPIO9", ++ "GPIO10", ++ "GPIO11", ++ "GPIO12", ++ "GPIO13", ++ "GPIO14", ++ "GPIO15", ++ "GPIO16", ++ "GPIO17", ++ "GPIO18", ++ "GPIO19", ++ "GPIO20", ++ "GPIO21", ++ "GPIO22", ++ "GPIO23", ++ "GPIO24", ++ "GPIO25", ++ "GPIO26", ++ "GPIO27", ++ "GPIO28", ++ "GPIO29", ++ "GPIO30", ++ "GPIO31", ++ "GPIO32", ++ "GPIO33", ++ "GPIO34", ++ "GPIO35", ++ "GPIO36", ++ "GPIO37", ++ "GPIO38", ++ "GPIO39", ++ "GPIO40", ++ "GPIO41", ++ "GPIO42", ++ "GPIO43", ++ "GPIO44", ++ "GPIO45", ++ "HDMI_HPD_N", ++ /* Also used as ACT LED */ ++ "EMMC_EN_N", ++ /* Used by eMMC */ ++ "SD_CLK_R", ++ "SD_CMD_R", ++ "SD_DATA0_R", ++ "SD_DATA1_R", ++ "SD_DATA2_R", ++ "SD_DATA3_R"; ++ ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins; ++ brcm,function; ++ }; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++}; ++ ++&i2c0if { ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&vchiq { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++&hdmi { ++ hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; ++}; +diff --git a/arch/arm/boot/dts/broadcom/bcm2708-rpi-cm.dtsi b/arch/arm/boot/dts/broadcom/bcm2708-rpi-cm.dtsi +new file mode 100644 +index 000000000000..10fd4475dd5e +--- /dev/null ++++ b/arch/arm/boot/dts/broadcom/bcm2708-rpi-cm.dtsi +@@ -0,0 +1,27 @@ ++#include "bcm2708.dtsi" ++#include "bcm2708-rpi.dtsi" ++#include "bcm283x-rpi-led-deprecated.dtsi" ++ ++&led_act { ++ gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; ++ default-state = "off"; ++ linux,default-trigger = "mmc0"; ++}; ++ ++i2c_arm: &i2c1 { ++}; ++ ++i2c_vc: &i2c0 { ++}; ++ ++/ { ++ __overrides__ { ++ act_led_gpio = <&led_act>,"gpios:4"; ++ act_led_activelow = <&led_act>,"gpios:8"; ++ act_led_trigger = <&led_act>,"linux,default-trigger"; ++ cam0_reg = <&cam0_reg>,"status"; ++ cam0_reg_gpio = <&cam0_reg>,"gpio:4"; ++ cam1_reg = <&cam1_reg>,"status"; ++ cam1_reg_gpio = <&cam1_reg>,"gpio:4"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/broadcom/bcm2708-rpi-zero-w.dts b/arch/arm/boot/dts/broadcom/bcm2708-rpi-zero-w.dts +new file mode 100644 +index 000000000000..4266caf1016c +--- /dev/null ++++ b/arch/arm/boot/dts/broadcom/bcm2708-rpi-zero-w.dts +@@ -0,0 +1,254 @@ ++/dts-v1/; ++ ++#include "bcm2708.dtsi" ++#include "bcm2708-rpi.dtsi" ++#include "bcm283x-rpi-csi1-2lane.dtsi" ++#include "bcm283x-rpi-i2c0mux_0_28.dtsi" ++#include "bcm2708-rpi-bt.dtsi" ++#include "bcm283x-rpi-led-deprecated.dtsi" ++ ++/ { ++ compatible = "raspberrypi,model-zero-w", "brcm,bcm2835"; ++ model = "Raspberry Pi Zero W"; ++ ++ chosen { ++ bootargs = "coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0"; ++ }; ++ ++ aliases { ++ serial0 = &uart1; ++ serial1 = &uart0; ++ mmc1 = &mmcnr; ++ }; ++}; ++ ++&gpio { ++ /* ++ * This is based on the official GPU firmware DT blob. ++ * ++ * Legend: ++ * "NC" = not connected (no rail from the SoC) ++ * "FOO" = GPIO line named "FOO" on the schematic ++ * "FOO_N" = GPIO line named "FOO" on schematic, active low ++ */ ++ gpio-line-names = "ID_SDA", ++ "ID_SCL", ++ "SDA1", ++ "SCL1", ++ "GPIO_GCLK", ++ "GPIO5", ++ "GPIO6", ++ "SPI_CE1_N", ++ "SPI_CE0_N", ++ "SPI_MISO", ++ "SPI_MOSI", ++ "SPI_SCLK", ++ "GPIO12", ++ "GPIO13", ++ /* Serial port */ ++ "TXD1", ++ "RXD1", ++ "GPIO16", ++ "GPIO17", ++ "GPIO18", ++ "GPIO19", ++ "GPIO20", ++ "GPIO21", ++ "GPIO22", ++ "GPIO23", ++ "GPIO24", ++ "GPIO25", ++ "GPIO26", ++ "GPIO27", ++ "SDA0", ++ "SCL0", ++ /* Used by BT module */ ++ "CTS0", ++ "RTS0", ++ "TXD0", ++ "RXD0", ++ /* Used by Wifi */ ++ "SD1_CLK", ++ "SD1_CMD", ++ "SD1_DATA0", ++ "SD1_DATA1", ++ "SD1_DATA2", ++ "SD1_DATA3", ++ "CAM_GPIO1", /* GPIO40 */ ++ "WL_ON", /* GPIO41 */ ++ "NC", /* GPIO42 */ ++ "WIFI_CLK", /* GPIO43 */ ++ "CAM_GPIO0", /* GPIO44 */ ++ "BT_ON", /* GPIO45 */ ++ "HDMI_HPD_N", ++ "STATUS_LED_N", ++ /* Used by SD Card */ ++ "SD_CLK_R", ++ "SD_CMD_R", ++ "SD_DATA0_R", ++ "SD_DATA1_R", ++ "SD_DATA2_R", ++ "SD_DATA3_R"; ++ ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ sdio_pins: sdio_pins { ++ brcm,pins = <34 35 36 37 38 39>; ++ brcm,function = <7>; /* ALT3 = SD1 */ ++ brcm,pull = <0 2 2 2 2 2>; ++ }; ++ ++ bt_pins: bt_pins { ++ brcm,pins = <43>; ++ brcm,function = <4>; /* alt0:GPCLK2 */ ++ brcm,pull = <0>; /* none */ ++ }; ++ ++ uart0_pins: uart0_pins { ++ brcm,pins = <30 31 32 33>; ++ brcm,function = <7>; /* alt3=UART0 */ ++ brcm,pull = <2 0 0 2>; /* up none none up */ ++ }; ++ ++ uart1_pins: uart1_pins { ++ brcm,pins; ++ brcm,function; ++ brcm,pull; ++ }; ++ ++ uart1_bt_pins: uart1_bt_pins { ++ brcm,pins = <32 33 30 31>; ++ brcm,function = ; /* alt5=UART1 */ ++ brcm,pull = <0 2 2 0>; ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins = <>; ++ brcm,function = <>; ++ }; ++}; ++ ++&mmcnr { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdio_pins>; ++ bus-width = <4>; ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ brcmf: wifi@1 { ++ reg = <1>; ++ compatible = "brcm,bcm4329-fmac"; ++ }; ++}; ++ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins &bt_pins>; ++ status = "okay"; ++}; ++ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart1_pins>; ++ status = "okay"; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++}; ++ ++&i2c0if { ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&led_act { ++ gpios = <&gpio 47 GPIO_ACTIVE_LOW>; ++ default-state = "off"; ++ linux,default-trigger = "actpwr"; ++}; ++ ++&hdmi { ++ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; ++}; ++ ++&vchiq { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++&cam1_reg { ++ gpio = <&gpio 44 GPIO_ACTIVE_HIGH>; ++}; ++ ++cam0_reg: &cam_dummy_reg { ++}; ++ ++i2c_arm: &i2c1 {}; ++i2c_vc: &i2c0 {}; ++ ++/ { ++ __overrides__ { ++ audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_hdmi=0'}"; ++ ++ act_led_gpio = <&led_act>,"gpios:4"; ++ act_led_activelow = <&led_act>,"gpios:8"; ++ act_led_trigger = <&led_act>,"linux,default-trigger"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/broadcom/bcm2708-rpi-zero.dts b/arch/arm/boot/dts/broadcom/bcm2708-rpi-zero.dts +new file mode 100644 +index 000000000000..3069f58221ff +--- /dev/null ++++ b/arch/arm/boot/dts/broadcom/bcm2708-rpi-zero.dts +@@ -0,0 +1,189 @@ ++/dts-v1/; ++ ++#include "bcm2708.dtsi" ++#include "bcm2708-rpi.dtsi" ++#include "bcm283x-rpi-csi1-2lane.dtsi" ++#include "bcm283x-rpi-i2c0mux_0_28.dtsi" ++#include "bcm283x-rpi-led-deprecated.dtsi" ++ ++/ { ++ compatible = "raspberrypi,model-zero", "brcm,bcm2835"; ++ model = "Raspberry Pi Zero"; ++}; ++ ++&gpio { ++ /* ++ * This is based on the official GPU firmware DT blob. ++ * ++ * Legend: ++ * "NC" = not connected (no rail from the SoC) ++ * "FOO" = GPIO line named "FOO" on the schematic ++ * "FOO_N" = GPIO line named "FOO" on schematic, active low ++ */ ++ gpio-line-names = "ID_SDA", ++ "ID_SCL", ++ "SDA1", ++ "SCL1", ++ "GPIO_GCLK", ++ "GPIO5", ++ "GPIO6", ++ "SPI_CE1_N", ++ "SPI_CE0_N", ++ "SPI_MISO", ++ "SPI_MOSI", ++ "SPI_SCLK", ++ "GPIO12", ++ "GPIO13", ++ /* Serial port */ ++ "TXD0", ++ "RXD0", ++ "GPIO16", ++ "GPIO17", ++ "GPIO18", ++ "GPIO19", ++ "GPIO20", ++ "GPIO21", ++ "GPIO22", ++ "GPIO23", ++ "GPIO24", ++ "GPIO25", ++ "GPIO26", ++ "GPIO27", ++ "SDA0", ++ "SCL0", ++ "NC", /* GPIO30 */ ++ "NC", /* GPIO31 */ ++ "CAM_GPIO1", /* GPIO32 */ ++ "NC", /* GPIO33 */ ++ "NC", /* GPIO34 */ ++ "NC", /* GPIO35 */ ++ "NC", /* GPIO36 */ ++ "NC", /* GPIO37 */ ++ "NC", /* GPIO38 */ ++ "NC", /* GPIO39 */ ++ "NC", /* GPIO40 */ ++ "CAM_GPIO0", /* GPIO41 */ ++ "NC", /* GPIO42 */ ++ "NC", /* GPIO43 */ ++ "NC", /* GPIO44 */ ++ "NC", /* GPIO45 */ ++ "HDMI_HPD_N", ++ "STATUS_LED_N", ++ /* Used by SD Card */ ++ "SD_CLK_R", ++ "SD_CMD_R", ++ "SD_DATA0_R", ++ "SD_DATA1_R", ++ "SD_DATA2_R", ++ "SD_DATA3_R"; ++ ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins = <>; ++ brcm,function = <>; ++ }; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++}; ++ ++&i2c0if { ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&led_act { ++ gpios = <&gpio 47 GPIO_ACTIVE_LOW>; ++ default-state = "off"; ++ linux,default-trigger = "actpwr"; ++}; ++ ++&hdmi { ++ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; ++}; ++ ++&vchiq { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++&cam1_reg { ++ gpio = <&gpio 41 GPIO_ACTIVE_HIGH>; ++}; ++ ++cam0_reg: &cam_dummy_reg { ++}; ++ ++i2c_arm: &i2c1 {}; ++i2c_vc: &i2c0 {}; ++ ++/ { ++ __overrides__ { ++ audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_hdmi=0'}"; ++ ++ act_led_gpio = <&led_act>,"gpios:4"; ++ act_led_activelow = <&led_act>,"gpios:8"; ++ act_led_trigger = <&led_act>,"linux,default-trigger"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/broadcom/bcm2708-rpi.dtsi b/arch/arm/boot/dts/broadcom/bcm2708-rpi.dtsi +new file mode 100644 +index 000000000000..f774eda1ae55 +--- /dev/null ++++ b/arch/arm/boot/dts/broadcom/bcm2708-rpi.dtsi +@@ -0,0 +1,40 @@ ++/* Downstream modifications common to bcm2835, bcm2836, bcm2837 */ ++ ++#define i2c0 i2c0mux ++#include "bcm2835-rpi.dtsi" ++#undef i2c0 ++#include "bcm270x-rpi.dtsi" ++ ++/ { ++ memory@0 { ++ device_type = "memory"; ++ reg = <0x0 0x0>; ++ }; ++ ++ aliases { ++ i2c2 = &i2c2; ++ }; ++ ++ __overrides__ { ++ hdmi = <&hdmi>,"status"; ++ i2c2_iknowwhatimdoing = <&i2c2>,"status"; ++ i2c2_baudrate = <&i2c2>,"clock-frequency:0"; ++ sd = <&sdhost>,"status"; ++ sd_poll_once = <&sdhost>,"non-removable?"; ++ }; ++}; ++ ++&sdhost { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdhost_gpio48>; ++ status = "okay"; ++}; ++ ++&hdmi { ++ power-domains = <&power RPI_POWER_DOMAIN_HDMI>; ++ status = "disabled"; ++}; ++ ++&i2c2 { ++ status = "disabled"; ++}; +diff --git a/arch/arm/boot/dts/broadcom/bcm2708.dtsi b/arch/arm/boot/dts/broadcom/bcm2708.dtsi +new file mode 100644 +index 000000000000..fdc7f2423bbe +--- /dev/null ++++ b/arch/arm/boot/dts/broadcom/bcm2708.dtsi +@@ -0,0 +1,19 @@ ++#define i2c0 i2c0if ++#include "bcm2835.dtsi" ++#undef i2c0 ++#include "bcm270x.dtsi" ++ ++/ { ++ __overrides__ { ++ arm_freq; ++ }; ++}; ++ ++&soc { ++ dma-ranges = <0x80000000 0x00000000 0x20000000>, ++ <0x7e000000 0x20000000 0x02000000>; ++}; ++ ++&vc4 { ++ status = "disabled"; ++}; +diff --git a/arch/arm/boot/dts/broadcom/bcm2709-rpi-2-b.dts b/arch/arm/boot/dts/broadcom/bcm2709-rpi-2-b.dts +new file mode 100644 +index 000000000000..c3e1b1be0140 +--- /dev/null ++++ b/arch/arm/boot/dts/broadcom/bcm2709-rpi-2-b.dts +@@ -0,0 +1,202 @@ ++/dts-v1/; ++ ++#include "bcm2709.dtsi" ++#include "bcm2709-rpi.dtsi" ++#include "bcm283x-rpi-smsc9514.dtsi" ++#include "bcm283x-rpi-csi1-2lane.dtsi" ++#include "bcm283x-rpi-i2c0mux_0_28.dtsi" ++#include "bcm283x-rpi-led-deprecated.dtsi" ++ ++/ { ++ compatible = "raspberrypi,2-model-b", "brcm,bcm2836"; ++ model = "Raspberry Pi 2 Model B"; ++}; ++ ++&gpio { ++ /* ++ * Taken from rpi_SCH_2b_1p2_reduced.pdf and ++ * the official GPU firmware DT blob. ++ * ++ * Legend: ++ * "NC" = not connected (no rail from the SoC) ++ * "FOO" = GPIO line named "FOO" on the schematic ++ * "FOO_N" = GPIO line named "FOO" on schematic, active low ++ */ ++ gpio-line-names = "ID_SDA", ++ "ID_SCL", ++ "SDA1", ++ "SCL1", ++ "GPIO_GCLK", ++ "GPIO5", ++ "GPIO6", ++ "SPI_CE1_N", ++ "SPI_CE0_N", ++ "SPI_MISO", ++ "SPI_MOSI", ++ "SPI_SCLK", ++ "GPIO12", ++ "GPIO13", ++ /* Serial port */ ++ "TXD0", ++ "RXD0", ++ "GPIO16", ++ "GPIO17", ++ "GPIO18", ++ "GPIO19", ++ "GPIO20", ++ "GPIO21", ++ "GPIO22", ++ "GPIO23", ++ "GPIO24", ++ "GPIO25", ++ "GPIO26", ++ "GPIO27", ++ "SDA0", ++ "SCL0", ++ "NC", /* GPIO30 */ ++ "LAN_RUN", ++ "CAM_GPIO1", ++ "NC", /* GPIO33 */ ++ "NC", /* GPIO34 */ ++ "PWR_LOW_N", ++ "NC", /* GPIO36 */ ++ "NC", /* GPIO37 */ ++ "USB_LIMIT", ++ "NC", /* GPIO39 */ ++ "PWM0_OUT", ++ "CAM_GPIO0", ++ "SMPS_SCL", ++ "SMPS_SDA", ++ "ETH_CLK", ++ "PWM1_OUT", ++ "HDMI_HPD_N", ++ "STATUS_LED", ++ /* Used by SD Card */ ++ "SD_CLK_R", ++ "SD_CMD_R", ++ "SD_DATA0_R", ++ "SD_DATA1_R", ++ "SD_DATA2_R", ++ "SD_DATA3_R"; ++ ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins = <40 45>; ++ brcm,function = <4>; ++ brcm,pull = <0>; ++ }; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++}; ++ ++&i2c0if { ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&led_act { ++ gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; ++ default-state = "off"; ++ linux,default-trigger = "mmc0"; ++}; ++ ++&leds { ++ led_pwr: led-pwr { ++ label = "PWR"; ++ gpios = <&gpio 35 GPIO_ACTIVE_HIGH>; ++ default-state = "off"; ++ linux,default-trigger = "input"; ++ }; ++}; ++ ++&hdmi { ++ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; ++}; ++ ++&vchiq { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++&cam1_reg { ++ gpio = <&gpio 41 GPIO_ACTIVE_HIGH>; ++}; ++ ++cam0_reg: &cam_dummy_reg { ++}; ++ ++/ { ++ __overrides__ { ++ audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=0'}"; ++ ++ act_led_gpio = <&led_act>,"gpios:4"; ++ act_led_activelow = <&led_act>,"gpios:8"; ++ act_led_trigger = <&led_act>,"linux,default-trigger"; ++ ++ pwr_led_gpio = <&led_pwr>,"gpios:4"; ++ pwr_led_activelow = <&led_pwr>,"gpios:8"; ++ pwr_led_trigger = <&led_pwr>,"linux,default-trigger"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/broadcom/bcm2709-rpi-cm2.dts b/arch/arm/boot/dts/broadcom/bcm2709-rpi-cm2.dts +new file mode 100644 +index 000000000000..78881c522eba +--- /dev/null ++++ b/arch/arm/boot/dts/broadcom/bcm2709-rpi-cm2.dts +@@ -0,0 +1,220 @@ ++/dts-v1/; ++ ++#include "bcm2709.dtsi" ++#include "bcm2709-rpi.dtsi" ++#include "bcm283x-rpi-csi0-2lane.dtsi" ++#include "bcm283x-rpi-csi1-4lane.dtsi" ++#include "bcm283x-rpi-i2c0mux_0_28.dtsi" ++#include "bcm283x-rpi-led-deprecated.dtsi" ++ ++/ { ++ compatible = "raspberrypi,2-compute-module", "brcm,bcm2836"; ++ model = "Raspberry Pi Compute Module 2"; ++}; ++ ++&cam1_reg { ++ gpio = <&gpio 2 GPIO_ACTIVE_HIGH>; ++ status = "disabled"; ++}; ++ ++cam0_reg: &cam0_regulator { ++ gpio = <&gpio 30 GPIO_ACTIVE_HIGH>; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; ++ ++&gpio { ++ /* ++ * This is based on the official GPU firmware DT blob. ++ * ++ * Legend: ++ * "NC" = not connected (no rail from the SoC) ++ * "FOO" = GPIO line named "FOO" on the schematic ++ * "FOO_N" = GPIO line named "FOO" on schematic, active low ++ */ ++ gpio-line-names = "GPIO0", ++ "GPIO1", ++ "GPIO2", ++ "GPIO3", ++ "GPIO4", ++ "GPIO5", ++ "GPIO6", ++ "GPIO7", ++ "GPIO8", ++ "GPIO9", ++ "GPIO10", ++ "GPIO11", ++ "GPIO12", ++ "GPIO13", ++ "GPIO14", ++ "GPIO15", ++ "GPIO16", ++ "GPIO17", ++ "GPIO18", ++ "GPIO19", ++ "GPIO20", ++ "GPIO21", ++ "GPIO22", ++ "GPIO23", ++ "GPIO24", ++ "GPIO25", ++ "GPIO26", ++ "GPIO27", ++ "GPIO28", ++ "GPIO29", ++ "GPIO30", ++ "GPIO31", ++ "GPIO32", ++ "GPIO33", ++ "GPIO34", ++ "GPIO35", ++ "GPIO36", ++ "GPIO37", ++ "GPIO38", ++ "GPIO39", ++ "GPIO40", ++ "GPIO41", ++ "GPIO42", ++ "GPIO43", ++ "GPIO44", ++ "GPIO45", ++ "SMPS_SCL", ++ "SMPS_SDA", ++ /* Used by eMMC */ ++ "SD_CLK_R", ++ "SD_CMD_R", ++ "SD_DATA0_R", ++ "SD_DATA1_R", ++ "SD_DATA2_R", ++ "SD_DATA3_R"; ++ ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins; ++ brcm,function; ++ }; ++}; ++ ++&soc { ++ virtgpio: virtgpio { ++ compatible = "brcm,bcm2835-virtgpio"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ firmware = <&firmware>; ++ status = "okay"; ++ }; ++ ++}; ++ ++&firmware { ++ expgpio: expgpio { ++ compatible = "raspberrypi,firmware-gpio"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ gpio-line-names = "HDMI_HPD_N", ++ "EMMC_EN_N", ++ "NC", ++ "NC", ++ "NC", ++ "NC", ++ "NC", ++ "NC"; ++ status = "okay"; ++ }; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++}; ++ ++&i2c0if { ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&led_act { ++ gpios = <&virtgpio 0 GPIO_ACTIVE_HIGH>; ++ default-state = "off"; ++ linux,default-trigger = "mmc0"; ++}; ++ ++&hdmi { ++ hpd-gpios = <&expgpio 0 GPIO_ACTIVE_LOW>; ++}; ++ ++&vchiq { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++/ { ++ __overrides__ { ++ audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_hdmi=0'}"; ++ ++ act_led_gpio = <&led_act>,"gpios:4"; ++ act_led_activelow = <&led_act>,"gpios:8"; ++ act_led_trigger = <&led_act>,"linux,default-trigger"; ++ cam0_reg = <&cam0_reg>,"status"; ++ cam0_reg_gpio = <&cam0_reg>,"gpio:4"; ++ cam1_reg = <&cam1_reg>,"status"; ++ cam1_reg_gpio = <&cam1_reg>,"gpio:4"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/broadcom/bcm2709-rpi.dtsi b/arch/arm/boot/dts/broadcom/bcm2709-rpi.dtsi +new file mode 100644 +index 000000000000..7335e7fbcb71 +--- /dev/null ++++ b/arch/arm/boot/dts/broadcom/bcm2709-rpi.dtsi +@@ -0,0 +1,8 @@ ++#include "bcm2708-rpi.dtsi" ++ ++&vchiq { ++ compatible = "brcm,bcm2836-vchiq", "brcm,bcm2835-vchiq"; ++}; ++ ++i2c_arm: &i2c1 {}; ++i2c_vc: &i2c0 {}; +diff --git a/arch/arm/boot/dts/broadcom/bcm2709.dtsi b/arch/arm/boot/dts/broadcom/bcm2709.dtsi +new file mode 100644 +index 000000000000..868f65f922ff +--- /dev/null ++++ b/arch/arm/boot/dts/broadcom/bcm2709.dtsi +@@ -0,0 +1,29 @@ ++#define i2c0 i2c0if ++#include "bcm2836.dtsi" ++#undef i2c0 ++#include "bcm270x.dtsi" ++ ++/ { ++ soc { ++ ranges = <0x7e000000 0x3f000000 0x01000000>, ++ <0x40000000 0x40000000 0x00040000>; ++ ++ dma-ranges = <0xc0000000 0x00000000 0x3f000000>, ++ <0x7e000000 0x3f000000 0x01000000>; ++ }; ++ ++ __overrides__ { ++ arm_freq = <&v7_cpu0>, "clock-frequency:0", ++ <&v7_cpu1>, "clock-frequency:0", ++ <&v7_cpu2>, "clock-frequency:0", ++ <&v7_cpu3>, "clock-frequency:0"; ++ }; ++}; ++ ++&system_timer { ++ status = "disabled"; ++}; ++ ++&vc4 { ++ status = "disabled"; ++}; +diff --git a/arch/arm/boot/dts/broadcom/bcm270x-rpi.dtsi b/arch/arm/boot/dts/broadcom/bcm270x-rpi.dtsi +new file mode 100644 +index 000000000000..be53604cb951 +--- /dev/null ++++ b/arch/arm/boot/dts/broadcom/bcm270x-rpi.dtsi +@@ -0,0 +1,180 @@ ++/* Downstream modifications to bcm2835-rpi.dtsi */ ++ ++/ { ++ aliases { ++ aux = &aux; ++ sound = &sound; ++ soc = &soc; ++ dma = &dma; ++ intc = &intc; ++ watchdog = &watchdog; ++ random = &random; ++ mailbox = &mailbox; ++ gpio = &gpio; ++ uart0 = &uart0; ++ uart1 = &uart1; ++ sdhost = &sdhost; ++ mmc = &mmc; ++ mmc1 = &mmc; ++ mmc0 = &sdhost; ++ i2s = &i2s; ++ i2c0 = &i2c0; ++ i2c1 = &i2c1; ++ i2c10 = &i2c_csi_dsi; ++ i2c = &i2c_arm; ++ spi0 = &spi0; ++ spi1 = &spi1; ++ spi2 = &spi2; ++ usb = &usb; ++ leds = &leds; ++ fb = &fb; ++ thermal = &thermal; ++ axiperf = &axiperf; ++ }; ++ ++ /* Define these notional regulators for use by overlays */ ++ vdd_3v3_reg: fixedregulator_3v3 { ++ compatible = "regulator-fixed"; ++ regulator-always-on; ++ regulator-max-microvolt = <3300000>; ++ regulator-min-microvolt = <3300000>; ++ regulator-name = "3v3"; ++ }; ++ ++ vdd_5v0_reg: fixedregulator_5v0 { ++ compatible = "regulator-fixed"; ++ regulator-always-on; ++ regulator-max-microvolt = <5000000>; ++ regulator-min-microvolt = <5000000>; ++ regulator-name = "5v0"; ++ }; ++ ++ soc { ++ gpiomem { ++ compatible = "brcm,bcm2835-gpiomem"; ++ reg = <0x7e200000 0x1000>; ++ }; ++ ++ fb: fb { ++ compatible = "brcm,bcm2708-fb"; ++ firmware = <&firmware>; ++ status = "okay"; ++ }; ++ ++ /* External sound card */ ++ sound: sound { ++ status = "disabled"; ++ }; ++ }; ++ ++ __overrides__ { ++ cache_line_size; ++ ++ uart0 = <&uart0>,"status"; ++ uart1 = <&uart1>,"status"; ++ i2s = <&i2s>,"status"; ++ spi = <&spi0>,"status"; ++ i2c0 = <&i2c0if>,"status",<&i2c0mux>,"status"; ++ i2c1 = <&i2c1>,"status"; ++ i2c = <&i2c1>,"status"; ++ i2c_arm = <&i2c1>,"status"; ++ i2c_vc = <&i2c0if>,"status",<&i2c0mux>,"status"; ++ i2c0_baudrate = <&i2c0if>,"clock-frequency:0"; ++ i2c1_baudrate = <&i2c1>,"clock-frequency:0"; ++ i2c_baudrate = <&i2c1>,"clock-frequency:0"; ++ i2c_arm_baudrate = <&i2c1>,"clock-frequency:0"; ++ i2c_vc_baudrate = <&i2c0if>,"clock-frequency:0"; ++ ++ watchdog = <&watchdog>,"status"; ++ random = <&random>,"status"; ++ sd_overclock = <&sdhost>,"brcm,overclock-50:0"; ++ sd_force_pio = <&sdhost>,"brcm,force-pio?"; ++ sd_pio_limit = <&sdhost>,"brcm,pio-limit:0"; ++ sd_debug = <&sdhost>,"brcm,debug"; ++ sdio_overclock = <&mmc>,"brcm,overclock-50:0", ++ <&mmcnr>,"brcm,overclock-50:0"; ++ axiperf = <&axiperf>,"status"; ++ }; ++}; ++ ++&uart0 { ++ skip-init; ++}; ++ ++&uart1 { ++ skip-init; ++}; ++ ++&txp { ++ status = "disabled"; ++}; ++ ++&i2c0if { ++ status = "disabled"; ++}; ++ ++&i2c0mux { ++ pinctrl-names = "i2c0", "i2c_csi_dsi"; ++ /delete-property/ clock-frequency; ++ status = "disabled"; ++}; ++ ++&i2c1 { ++ status = "disabled"; ++}; ++ ++&clocks { ++ firmware = <&firmware>; ++}; ++ ++&sdhci { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&emmc_gpio48>; ++ bus-width = <4>; ++}; ++ ++&cpu_thermal { ++ // Add some labels ++ thermal_trips: trips { ++ cpu-crit { ++ // Raise upstream limit of 90C ++ temperature = <110000>; ++ }; ++ }; ++ cooling_maps: cooling-maps { ++ }; ++}; ++ ++&vec { ++ clocks = <&firmware_clocks 15>; ++ status = "disabled"; ++}; ++ ++&firmware { ++#ifndef BCM2711 ++ firmware_clocks: clocks { ++ compatible = "raspberrypi,firmware-clocks"; ++ #clock-cells = <1>; ++ }; ++#endif ++ ++ vcio: vcio { ++ compatible = "raspberrypi,vcio"; ++ }; ++}; ++ ++&vc4 { ++ raspberrypi,firmware = <&firmware>; ++}; ++ ++#ifndef BCM2711 ++ ++&hdmi { ++ reg-names = "hdmi", ++ "hd"; ++ clocks = <&firmware_clocks 9>, ++ <&firmware_clocks 13>; ++ dmas = <&dma (17|(1<<27)|(1<<24))>; ++}; ++ ++#endif +diff --git a/arch/arm/boot/dts/broadcom/bcm270x.dtsi b/arch/arm/boot/dts/broadcom/bcm270x.dtsi +new file mode 100644 +index 000000000000..c318080eb883 +--- /dev/null ++++ b/arch/arm/boot/dts/broadcom/bcm270x.dtsi +@@ -0,0 +1,294 @@ ++/* Downstream bcm283x.dtsi diff */ ++#include ++ ++/ { ++ chosen: chosen { ++ // Disable audio by default ++ bootargs = "coherent_pool=1M snd_bcm2835.enable_headphones=0"; ++ stdout-path = "serial0:115200n8"; ++ }; ++ ++ soc: soc { ++ watchdog: watchdog@7e100000 { ++ /* Add label */ ++ }; ++ ++ random: rng@7e104000 { ++ /* Add label */ ++ }; ++ ++ spi0: spi@7e204000 { ++ /* Add label */ ++ }; ++ ++#ifndef BCM2711 ++ pixelvalve0: pixelvalve@7e206000 { ++ /* Add label */ ++ status = "disabled"; ++ }; ++ ++ pixelvalve1: pixelvalve@7e207000 { ++ /* Add label */ ++ status = "disabled"; ++ }; ++#endif ++ ++ /delete-node/ mmc@7e300000; ++ ++ sdhci: mmc: mmc@7e300000 { ++ compatible = "brcm,bcm2835-mmc", "brcm,bcm2835-sdhci"; ++ reg = <0x7e300000 0x100>; ++ interrupts = <2 30>; ++ clocks = <&clocks BCM2835_CLOCK_EMMC>; ++ dmas = <&dma 11>; ++ dma-names = "rx-tx"; ++ brcm,overclock-50 = <0>; ++ status = "disabled"; ++ }; ++ ++ /* A clone of mmc but with non-removable set */ ++ mmcnr: mmcnr@7e300000 { ++ compatible = "brcm,bcm2835-mmc", "brcm,bcm2835-sdhci"; ++ reg = <0x7e300000 0x100>; ++ interrupts = <2 30>; ++ clocks = <&clocks BCM2835_CLOCK_EMMC>; ++ dmas = <&dma 11>; ++ dma-names = "rx-tx"; ++ brcm,overclock-50 = <0>; ++ non-removable; ++ status = "disabled"; ++ }; ++ ++ hvs: hvs@7e400000 { ++ /* Add label */ ++ status = "disabled"; ++ }; ++ ++ firmwarekms: firmwarekms@7e600000 { ++ compatible = "raspberrypi,rpi-firmware-kms"; ++ /* SMI interrupt reg */ ++ reg = <0x7e600000 0x100>; ++ interrupts = <2 16>; ++ brcm,firmware = <&firmware>; ++ status = "disabled"; ++ }; ++ ++ smi: smi@7e600000 { ++ compatible = "brcm,bcm2835-smi"; ++ reg = <0x7e600000 0x100>; ++ interrupts = <2 16>; ++ clocks = <&clocks BCM2835_CLOCK_SMI>; ++ assigned-clocks = <&clocks BCM2835_CLOCK_SMI>; ++ assigned-clock-rates = <125000000>; ++ dmas = <&dma 4>; ++ dma-names = "rx-tx"; ++ status = "disabled"; ++ }; ++ ++ csi0: csi@7e800000 { ++ compatible = "brcm,bcm2835-unicam"; ++ reg = <0x7e800000 0x800>, ++ <0x7e802000 0x4>; ++ interrupts = <2 6>; ++ clocks = <&clocks BCM2835_CLOCK_CAM0>, ++ <&firmware_clocks 4>; ++ clock-names = "lp", "vpu"; ++ power-domains = <&power RPI_POWER_DOMAIN_UNICAM0>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ #clock-cells = <1>; ++ status = "disabled"; ++ }; ++ ++ csi1: csi@7e801000 { ++ compatible = "brcm,bcm2835-unicam"; ++ reg = <0x7e801000 0x800>, ++ <0x7e802004 0x4>; ++ interrupts = <2 7>; ++ clocks = <&clocks BCM2835_CLOCK_CAM1>, ++ <&firmware_clocks 4>; ++ clock-names = "lp", "vpu"; ++ power-domains = <&power RPI_POWER_DOMAIN_UNICAM1>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ #clock-cells = <1>; ++ status = "disabled"; ++ }; ++ ++#ifndef BCM2711 ++ pixelvalve2: pixelvalve@7e807000 { ++ /* Add label */ ++ status = "disabled"; ++ }; ++#endif ++ ++ hdmi@7e902000 { /* hdmi */ ++ status = "disabled"; ++ }; ++ ++ usb@7e980000 { /* usb */ ++ compatible = "brcm,bcm2708-usb"; ++ reg = <0x7e980000 0x10000>, ++ <0x7e006000 0x1000>; ++ interrupt-names = "usb", ++ "soft"; ++ interrupts = <1 9>, ++ <2 0>; ++ }; ++ ++#ifndef BCM2711 ++ v3d@7ec00000 { /* vd3 */ ++ compatible = "brcm,vc4-v3d"; ++ power-domains = <&power RPI_POWER_DOMAIN_V3D>; ++ status = "disabled"; ++ }; ++#endif ++ ++ axiperf: axiperf { ++ compatible = "brcm,bcm2835-axiperf"; ++ reg = <0x7e009800 0x100>, ++ <0x7ee08000 0x100>; ++ firmware = <&firmware>; ++ status = "disabled"; ++ }; ++ ++ i2c0mux: i2c0mux { ++ compatible = "i2c-mux-pinctrl"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ i2c-parent = <&i2c0if>; ++ ++ status = "disabled"; ++ ++ i2c0: i2c@0 { ++ reg = <0>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ ++ i2c_csi_dsi: i2c@1 { ++ reg = <1>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ }; ++ }; ++ ++ cam1_reg: cam1_regulator { ++ compatible = "regulator-fixed"; ++ regulator-name = "cam1-reg"; ++ enable-active-high; ++ /* Needs to be enabled, as removing a regulator is very unsafe */ ++ status = "okay"; ++ }; ++ ++ cam1_clk: cam1_clk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ status = "disabled"; ++ }; ++ ++ cam0_regulator: cam0_regulator { ++ compatible = "regulator-fixed"; ++ regulator-name = "cam0-reg"; ++ enable-active-high; ++ status = "disabled"; ++ }; ++ ++ cam0_clk: cam0_clk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ status = "disabled"; ++ }; ++ ++ cam_dummy_reg: cam_dummy_reg { ++ compatible = "regulator-fixed"; ++ regulator-name = "cam-dummy-reg"; ++ status = "okay"; ++ }; ++ ++ __overrides__ { ++ cam0-pwdn-ctrl; ++ cam0-pwdn; ++ cam0-led-ctrl; ++ cam0-led; ++ }; ++}; ++ ++&gpio { ++ interrupts = <2 17>, <2 18>; ++ ++ dpi_18bit_cpadhi_gpio0: dpi_18bit_cpadhi_gpio0 { ++ brcm,pins = <0 1 2 3 4 5 6 7 8 9 ++ 12 13 14 15 16 17 ++ 20 21 22 23 24 25>; ++ brcm,function = ; ++ brcm,pull = <0>; /* no pull */ ++ }; ++ dpi_18bit_cpadhi_gpio2: dpi_18bit_cpadhi_gpio2 { ++ brcm,pins = <2 3 4 5 6 7 8 9 ++ 12 13 14 15 16 17 ++ 20 21 22 23 24 25>; ++ brcm,function = ; ++ }; ++ dpi_18bit_gpio0: dpi_18bit_gpio0 { ++ brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11 ++ 12 13 14 15 16 17 18 19 ++ 20 21>; ++ brcm,function = ; ++ }; ++ dpi_18bit_gpio2: dpi_18bit_gpio2 { ++ brcm,pins = <2 3 4 5 6 7 8 9 10 11 ++ 12 13 14 15 16 17 18 19 ++ 20 21>; ++ brcm,function = ; ++ }; ++ dpi_16bit_gpio0: dpi_16bit_gpio0 { ++ brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11 ++ 12 13 14 15 16 17 18 19>; ++ brcm,function = ; ++ }; ++ dpi_16bit_gpio2: dpi_16bit_gpio2 { ++ brcm,pins = <2 3 4 5 6 7 8 9 10 11 ++ 12 13 14 15 16 17 18 19>; ++ brcm,function = ; ++ }; ++ dpi_16bit_cpadhi_gpio0: dpi_16bit_cpadhi_gpio0 { ++ brcm,pins = <0 1 2 3 4 5 6 7 8 ++ 12 13 14 15 16 17 ++ 20 21 22 23 24>; ++ brcm,function = ; ++ }; ++ dpi_16bit_cpadhi_gpio2: dpi_16bit_cpadhi_gpio2 { ++ brcm,pins = <2 3 4 5 6 7 8 ++ 12 13 14 15 16 17 ++ 20 21 22 23 24>; ++ brcm,function = ; ++ }; ++}; ++ ++&uart0 { ++ /* Enable CTS bug workaround */ ++ cts-event-workaround; ++}; ++ ++&i2s { ++ #sound-dai-cells = <0>; ++ dmas = <&dma 2>, <&dma 3>; ++ dma-names = "tx", "rx"; ++}; ++ ++&sdhost { ++ dmas = <&dma (13|(1<<29))>; ++ dma-names = "rx-tx"; ++ bus-width = <4>; ++ brcm,overclock-50 = <0>; ++ brcm,pio-limit = <1>; ++ firmware = <&firmware>; ++}; ++ ++&spi0 { ++ dmas = <&dma 6>, <&dma 7>; ++ dma-names = "tx", "rx"; ++}; +diff --git a/arch/arm/boot/dts/broadcom/bcm2710-rpi-2-b.dts b/arch/arm/boot/dts/broadcom/bcm2710-rpi-2-b.dts +new file mode 100644 +index 000000000000..3c89b4446aca +--- /dev/null ++++ b/arch/arm/boot/dts/broadcom/bcm2710-rpi-2-b.dts +@@ -0,0 +1,202 @@ ++/dts-v1/; ++ ++#include "bcm2710.dtsi" ++#include "bcm2709-rpi.dtsi" ++#include "bcm283x-rpi-smsc9514.dtsi" ++#include "bcm283x-rpi-csi1-2lane.dtsi" ++#include "bcm283x-rpi-i2c0mux_0_28.dtsi" ++#include "bcm283x-rpi-led-deprecated.dtsi" ++ ++/ { ++ compatible = "raspberrypi,2-model-b-rev2", "brcm,bcm2837"; ++ model = "Raspberry Pi 2 Model B rev 1.2"; ++}; ++ ++&gpio { ++ /* ++ * Taken from rpi_SCH_2b_1p2_reduced.pdf and ++ * the official GPU firmware DT blob. ++ * ++ * Legend: ++ * "NC" = not connected (no rail from the SoC) ++ * "FOO" = GPIO line named "FOO" on the schematic ++ * "FOO_N" = GPIO line named "FOO" on schematic, active low ++ */ ++ gpio-line-names = "ID_SDA", ++ "ID_SCL", ++ "SDA1", ++ "SCL1", ++ "GPIO_GCLK", ++ "GPIO5", ++ "GPIO6", ++ "SPI_CE1_N", ++ "SPI_CE0_N", ++ "SPI_MISO", ++ "SPI_MOSI", ++ "SPI_SCLK", ++ "GPIO12", ++ "GPIO13", ++ /* Serial port */ ++ "TXD0", ++ "RXD0", ++ "GPIO16", ++ "GPIO17", ++ "GPIO18", ++ "GPIO19", ++ "GPIO20", ++ "GPIO21", ++ "GPIO22", ++ "GPIO23", ++ "GPIO24", ++ "GPIO25", ++ "GPIO26", ++ "GPIO27", ++ "SDA0", ++ "SCL0", ++ "NC", /* GPIO30 */ ++ "LAN_RUN", ++ "CAM_GPIO1", ++ "NC", /* GPIO33 */ ++ "NC", /* GPIO34 */ ++ "PWR_LOW_N", ++ "NC", /* GPIO36 */ ++ "NC", /* GPIO37 */ ++ "USB_LIMIT", ++ "NC", /* GPIO39 */ ++ "PWM0_OUT", ++ "CAM_GPIO0", ++ "SMPS_SCL", ++ "SMPS_SDA", ++ "ETH_CLK", ++ "PWM1_OUT", ++ "HDMI_HPD_N", ++ "STATUS_LED", ++ /* Used by SD Card */ ++ "SD_CLK_R", ++ "SD_CMD_R", ++ "SD_DATA0_R", ++ "SD_DATA1_R", ++ "SD_DATA2_R", ++ "SD_DATA3_R"; ++ ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins = <40 45>; ++ brcm,function = <4>; ++ brcm,pull = <0>; ++ }; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++}; ++ ++&i2c0if { ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&led_act { ++ gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; ++ default-state = "off"; ++ linux,default-trigger = "mmc0"; ++}; ++ ++&leds { ++ led_pwr: led-pwr { ++ label = "PWR"; ++ gpios = <&gpio 35 GPIO_ACTIVE_HIGH>; ++ default-state = "off"; ++ linux,default-trigger = "input"; ++ }; ++}; ++ ++&hdmi { ++ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; ++}; ++ ++&vchiq { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++&cam1_reg { ++ gpio = <&gpio 41 GPIO_ACTIVE_HIGH>; ++}; ++ ++cam0_reg: &cam_dummy_reg { ++}; ++ ++/ { ++ __overrides__ { ++ audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=0'}"; ++ ++ act_led_gpio = <&led_act>,"gpios:4"; ++ act_led_activelow = <&led_act>,"gpios:8"; ++ act_led_trigger = <&led_act>,"linux,default-trigger"; ++ ++ pwr_led_gpio = <&led_pwr>,"gpios:4"; ++ pwr_led_activelow = <&led_pwr>,"gpios:8"; ++ pwr_led_trigger = <&led_pwr>,"linux,default-trigger"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/broadcom/bcm2710-rpi-3-b-plus.dts b/arch/arm/boot/dts/broadcom/bcm2710-rpi-3-b-plus.dts +new file mode 100644 +index 000000000000..818804dc2f49 +--- /dev/null ++++ b/arch/arm/boot/dts/broadcom/bcm2710-rpi-3-b-plus.dts +@@ -0,0 +1,297 @@ ++/dts-v1/; ++ ++#include "bcm2710.dtsi" ++#include "bcm2709-rpi.dtsi" ++#include "bcm283x-rpi-lan7515.dtsi" ++#include "bcm283x-rpi-csi1-2lane.dtsi" ++#include "bcm283x-rpi-i2c0mux_0_44.dtsi" ++#include "bcm271x-rpi-bt.dtsi" ++#include "bcm283x-rpi-led-deprecated.dtsi" ++ ++/ { ++ compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837"; ++ model = "Raspberry Pi 3 Model B+"; ++ ++ chosen { ++ bootargs = "coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0"; ++ }; ++ ++ aliases { ++ serial0 = &uart1; ++ serial1 = &uart0; ++ mmc1 = &mmcnr; ++ }; ++}; ++ ++&gpio { ++ /* ++ * Taken from rpi_SCH_3bplus_1p0_reduced.pdf and ++ * the official GPU firmware DT blob. ++ * ++ * Legend: ++ * "NC" = not connected (no rail from the SoC) ++ * "FOO" = GPIO line named "FOO" on the schematic ++ * "FOO_N" = GPIO line named "FOO" on schematic, active low ++ */ ++ gpio-line-names = "ID_SDA", ++ "ID_SCL", ++ "SDA1", ++ "SCL1", ++ "GPIO_GCLK", ++ "GPIO5", ++ "GPIO6", ++ "SPI_CE1_N", ++ "SPI_CE0_N", ++ "SPI_MISO", ++ "SPI_MOSI", ++ "SPI_SCLK", ++ "GPIO12", ++ "GPIO13", ++ /* Serial port */ ++ "TXD1", ++ "RXD1", ++ "GPIO16", ++ "GPIO17", ++ "GPIO18", ++ "GPIO19", ++ "GPIO20", ++ "GPIO21", ++ "GPIO22", ++ "GPIO23", ++ "GPIO24", ++ "GPIO25", ++ "GPIO26", ++ "GPIO27", ++ "HDMI_HPD_N", ++ "STATUS_LED_G", ++ /* Used by BT module */ ++ "CTS0", ++ "RTS0", ++ "TXD0", ++ "RXD0", ++ /* Used by Wifi */ ++ "SD1_CLK", ++ "SD1_CMD", ++ "SD1_DATA0", ++ "SD1_DATA1", ++ "SD1_DATA2", ++ "SD1_DATA3", ++ "PWM0_OUT", ++ "PWM1_OUT", ++ "ETH_CLK", ++ "WIFI_CLK", ++ "SDA0", ++ "SCL0", ++ "SMPS_SCL", ++ "SMPS_SDA", ++ /* Used by SD Card */ ++ "SD_CLK_R", ++ "SD_CMD_R", ++ "SD_DATA0_R", ++ "SD_DATA1_R", ++ "SD_DATA2_R", ++ "SD_DATA3_R"; ++ ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ sdio_pins: sdio_pins { ++ brcm,pins = <34 35 36 37 38 39>; ++ brcm,function = <7>; // alt3 = SD1 ++ brcm,pull = <0 2 2 2 2 2>; ++ }; ++ ++ bt_pins: bt_pins { ++ brcm,pins = <43>; ++ brcm,function = <4>; /* alt0:GPCLK2 */ ++ brcm,pull = <0>; ++ }; ++ ++ uart0_pins: uart0_pins { ++ brcm,pins = <32 33>; ++ brcm,function = <7>; /* alt3=UART0 */ ++ brcm,pull = <0 2>; ++ }; ++ ++ uart1_pins: uart1_pins { ++ brcm,pins; ++ brcm,function; ++ brcm,pull; ++ }; ++ ++ uart1_bt_pins: uart1_bt_pins { ++ brcm,pins = <32 33 30 31>; ++ brcm,function = ; /* alt5=UART1 */ ++ brcm,pull = <0 2 2 0>; ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins = <40 41>; ++ brcm,function = <4>; ++ brcm,pull = <0>; ++ }; ++}; ++ ++&mmcnr { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdio_pins>; ++ bus-width = <4>; ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ brcmf: wifi@1 { ++ reg = <1>; ++ compatible = "brcm,bcm4329-fmac"; ++ }; ++}; ++ ++&firmware { ++ expgpio: expgpio { ++ compatible = "raspberrypi,firmware-gpio"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ gpio-line-names = "BT_ON", ++ "WL_ON", ++ "PWR_LED_R", ++ "LAN_RUN", ++ "NC", ++ "CAM_GPIO0", ++ "CAM_GPIO1", ++ "NC"; ++ status = "okay"; ++ }; ++}; ++ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins &bt_pins>; ++ status = "okay"; ++}; ++ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart1_pins>; ++ status = "okay"; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++}; ++ ++&i2c0if { ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&led_act { ++ gpios = <&gpio 29 GPIO_ACTIVE_HIGH>; ++ default-state = "off"; ++ linux,default-trigger = "mmc0"; ++}; ++ ++&leds { ++ led_pwr: led-pwr { ++ label = "PWR"; ++ gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; ++ default-state = "off"; ++ linux,default-trigger = "default-on"; ++ }; ++}; ++ ++&hdmi { ++ hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>; ++}; ++ ++&vchiq { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++ð_phy { ++ microchip,eee-enabled; ++ microchip,tx-lpi-timer = <600>; /* non-aggressive*/ ++ microchip,downshift-after = <2>; ++}; ++ ++&cam1_reg { ++ gpio = <&expgpio 5 GPIO_ACTIVE_HIGH>; ++}; ++ ++cam0_reg: &cam_dummy_reg { ++}; ++ ++/ { ++ __overrides__ { ++ audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=0'}"; ++ ++ act_led_gpio = <&led_act>,"gpios:4"; ++ act_led_activelow = <&led_act>,"gpios:8"; ++ act_led_trigger = <&led_act>,"linux,default-trigger"; ++ ++ pwr_led_gpio = <&led_pwr>,"gpios:4"; ++ pwr_led_activelow = <&led_pwr>,"gpios:8"; ++ pwr_led_trigger = <&led_pwr>,"linux,default-trigger"; ++ ++ eee = <ð_phy>,"microchip,eee-enabled?"; ++ tx_lpi_timer = <ð_phy>,"microchip,tx-lpi-timer:0"; ++ eth_led0 = <ð_phy>,"microchip,led-modes:0"; ++ eth_led1 = <ð_phy>,"microchip,led-modes:4"; ++ eth_downshift_after = <ð_phy>,"microchip,downshift-after:0"; ++ eth_max_speed = <ð_phy>,"max-speed:0"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/broadcom/bcm2710-rpi-3-b.dts b/arch/arm/boot/dts/broadcom/bcm2710-rpi-3-b.dts +new file mode 100644 +index 000000000000..14bb3be1fc87 +--- /dev/null ++++ b/arch/arm/boot/dts/broadcom/bcm2710-rpi-3-b.dts +@@ -0,0 +1,299 @@ ++/dts-v1/; ++ ++#include "bcm2710.dtsi" ++#include "bcm2709-rpi.dtsi" ++#include "bcm283x-rpi-smsc9514.dtsi" ++#include "bcm283x-rpi-csi1-2lane.dtsi" ++#include "bcm283x-rpi-i2c0mux_0_44.dtsi" ++#include "bcm271x-rpi-bt.dtsi" ++#include "bcm283x-rpi-led-deprecated.dtsi" ++ ++/ { ++ compatible = "raspberrypi,3-model-b", "brcm,bcm2837"; ++ model = "Raspberry Pi 3 Model B"; ++ ++ chosen { ++ bootargs = "coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0"; ++ }; ++ ++ aliases { ++ serial0 = &uart1; ++ serial1 = &uart0; ++ mmc1 = &mmcnr; ++ }; ++}; ++ ++&gpio { ++ /* ++ * Taken from rpi_SCH_3b_1p2_reduced.pdf and ++ * the official GPU firmware DT blob. ++ * ++ * Legend: ++ * "NC" = not connected (no rail from the SoC) ++ * "FOO" = GPIO line named "FOO" on the schematic ++ * "FOO_N" = GPIO line named "FOO" on schematic, active low ++ */ ++ gpio-line-names = "ID_SDA", ++ "ID_SCL", ++ "SDA1", ++ "SCL1", ++ "GPIO_GCLK", ++ "GPIO5", ++ "GPIO6", ++ "SPI_CE1_N", ++ "SPI_CE0_N", ++ "SPI_MISO", ++ "SPI_MOSI", ++ "SPI_SCLK", ++ "GPIO12", ++ "GPIO13", ++ /* Serial port */ ++ "TXD1", ++ "RXD1", ++ "GPIO16", ++ "GPIO17", ++ "GPIO18", ++ "GPIO19", ++ "GPIO20", ++ "GPIO21", ++ "GPIO22", ++ "GPIO23", ++ "GPIO24", ++ "GPIO25", ++ "GPIO26", ++ "GPIO27", ++ "NC", /* GPIO 28 */ ++ "LAN_RUN_BOOT", ++ /* Used by BT module */ ++ "CTS0", ++ "RTS0", ++ "TXD0", ++ "RXD0", ++ /* Used by Wifi */ ++ "SD1_CLK", ++ "SD1_CMD", ++ "SD1_DATA0", ++ "SD1_DATA1", ++ "SD1_DATA2", ++ "SD1_DATA3", ++ "PWM0_OUT", ++ "PWM1_OUT", ++ "ETH_CLK", ++ "WIFI_CLK", ++ "SDA0", ++ "SCL0", ++ "SMPS_SCL", ++ "SMPS_SDA", ++ /* Used by SD Card */ ++ "SD_CLK_R", ++ "SD_CMD_R", ++ "SD_DATA0_R", ++ "SD_DATA1_R", ++ "SD_DATA2_R", ++ "SD_DATA3_R"; ++ ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ sdio_pins: sdio_pins { ++ brcm,pins = <34 35 36 37 38 39>; ++ brcm,function = <7>; // alt3 = SD1 ++ brcm,pull = <0 2 2 2 2 2>; ++ }; ++ ++ bt_pins: bt_pins { ++ brcm,pins = <43>; ++ brcm,function = <4>; /* alt0:GPCLK2 */ ++ brcm,pull = <0>; ++ }; ++ ++ uart0_pins: uart0_pins { ++ brcm,pins = <32 33>; ++ brcm,function = <7>; /* alt3=UART0 */ ++ brcm,pull = <0 2>; ++ }; ++ ++ uart1_pins: uart1_pins { ++ brcm,pins; ++ brcm,function; ++ brcm,pull; ++ }; ++ ++ uart1_bt_pins: uart1_bt_pins { ++ brcm,pins = <32 33>; ++ brcm,function = ; /* alt5=UART1 */ ++ brcm,pull = <0 2>; ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins = <40 41>; ++ brcm,function = <4>; ++ brcm,pull = <0>; ++ }; ++}; ++ ++&mmcnr { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdio_pins>; ++ bus-width = <4>; ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ brcmf: wifi@1 { ++ reg = <1>; ++ compatible = "brcm,bcm4329-fmac"; ++ }; ++}; ++ ++&soc { ++ virtgpio: virtgpio { ++ compatible = "brcm,bcm2835-virtgpio"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ firmware = <&firmware>; ++ status = "okay"; ++ }; ++ ++}; ++ ++&firmware { ++ expgpio: expgpio { ++ compatible = "raspberrypi,firmware-gpio"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ gpio-line-names = "BT_ON", ++ "WL_ON", ++ "STATUS_LED", ++ "LAN_RUN", ++ "HDMI_HPD_N", ++ "CAM_GPIO0", ++ "CAM_GPIO1", ++ "PWR_LOW_N"; ++ status = "okay"; ++ }; ++}; ++ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins &bt_pins>; ++ status = "okay"; ++}; ++ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart1_pins>; ++ status = "okay"; ++}; ++ ++&bt { ++ max-speed = <921600>; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++}; ++ ++&i2c0if { ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&led_act { ++ gpios = <&virtgpio 0 GPIO_ACTIVE_HIGH>; ++ default-state = "off"; ++ linux,default-trigger = "mmc0"; ++}; ++ ++&leds { ++ led_pwr: led-pwr { ++ label = "PWR"; ++ gpios = <&expgpio 7 GPIO_ACTIVE_HIGH>; ++ default-state = "off"; ++ linux,default-trigger = "input"; ++ }; ++}; ++ ++&hdmi { ++ hpd-gpios = <&expgpio 4 GPIO_ACTIVE_LOW>; ++}; ++ ++&vchiq { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++&cam1_reg { ++ gpio = <&expgpio 5 GPIO_ACTIVE_HIGH>; ++}; ++ ++cam0_reg: &cam_dummy_reg { ++}; ++ ++/ { ++ __overrides__ { ++ audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=0'}"; ++ ++ act_led_gpio = <&led_act>,"gpios:4"; ++ act_led_activelow = <&led_act>,"gpios:8"; ++ act_led_trigger = <&led_act>,"linux,default-trigger"; ++ ++ pwr_led_gpio = <&led_pwr>,"gpios:4"; ++ pwr_led_activelow = <&led_pwr>,"gpios:8"; ++ pwr_led_trigger = <&led_pwr>,"linux,default-trigger"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/broadcom/bcm2710-rpi-cm3.dts b/arch/arm/boot/dts/broadcom/bcm2710-rpi-cm3.dts +new file mode 100644 +index 000000000000..5cb73424e3fa +--- /dev/null ++++ b/arch/arm/boot/dts/broadcom/bcm2710-rpi-cm3.dts +@@ -0,0 +1,220 @@ ++/dts-v1/; ++ ++#include "bcm2710.dtsi" ++#include "bcm2709-rpi.dtsi" ++#include "bcm283x-rpi-csi0-2lane.dtsi" ++#include "bcm283x-rpi-csi1-4lane.dtsi" ++#include "bcm283x-rpi-i2c0mux_0_28.dtsi" ++#include "bcm283x-rpi-led-deprecated.dtsi" ++ ++/ { ++ compatible = "raspberrypi,3-compute-module", "brcm,bcm2837"; ++ model = "Raspberry Pi Compute Module 3"; ++}; ++ ++&cam1_reg { ++ gpio = <&gpio 3 GPIO_ACTIVE_HIGH>; ++ status = "disabled"; ++}; ++ ++cam0_reg: &cam0_regulator { ++ gpio = <&gpio 31 GPIO_ACTIVE_HIGH>; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; ++ ++&gpio { ++ /* ++ * This is based on the official GPU firmware DT blob. ++ * ++ * Legend: ++ * "NC" = not connected (no rail from the SoC) ++ * "FOO" = GPIO line named "FOO" on the schematic ++ * "FOO_N" = GPIO line named "FOO" on schematic, active low ++ */ ++ gpio-line-names = "GPIO0", ++ "GPIO1", ++ "GPIO2", ++ "GPIO3", ++ "GPIO4", ++ "GPIO5", ++ "GPIO6", ++ "GPIO7", ++ "GPIO8", ++ "GPIO9", ++ "GPIO10", ++ "GPIO11", ++ "GPIO12", ++ "GPIO13", ++ "GPIO14", ++ "GPIO15", ++ "GPIO16", ++ "GPIO17", ++ "GPIO18", ++ "GPIO19", ++ "GPIO20", ++ "GPIO21", ++ "GPIO22", ++ "GPIO23", ++ "GPIO24", ++ "GPIO25", ++ "GPIO26", ++ "GPIO27", ++ "GPIO28", ++ "GPIO29", ++ "GPIO30", ++ "GPIO31", ++ "GPIO32", ++ "GPIO33", ++ "GPIO34", ++ "GPIO35", ++ "GPIO36", ++ "GPIO37", ++ "GPIO38", ++ "GPIO39", ++ "GPIO40", ++ "GPIO41", ++ "GPIO42", ++ "GPIO43", ++ "GPIO44", ++ "GPIO45", ++ "SMPS_SCL", ++ "SMPS_SDA", ++ /* Used by eMMC */ ++ "SD_CLK_R", ++ "SD_CMD_R", ++ "SD_DATA0_R", ++ "SD_DATA1_R", ++ "SD_DATA2_R", ++ "SD_DATA3_R"; ++ ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins; ++ brcm,function; ++ }; ++}; ++ ++&soc { ++ virtgpio: virtgpio { ++ compatible = "brcm,bcm2835-virtgpio"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ firmware = <&firmware>; ++ status = "okay"; ++ }; ++ ++}; ++ ++&firmware { ++ expgpio: expgpio { ++ compatible = "raspberrypi,firmware-gpio"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ gpio-line-names = "HDMI_HPD_N", ++ "EMMC_EN_N", ++ "NC", ++ "NC", ++ "NC", ++ "NC", ++ "NC", ++ "NC"; ++ status = "okay"; ++ }; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++}; ++ ++&i2c0if { ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&led_act { ++ gpios = <&virtgpio 0 GPIO_ACTIVE_HIGH>; ++ default-state = "off"; ++ linux,default-trigger = "mmc0"; ++}; ++ ++&hdmi { ++ hpd-gpios = <&expgpio 0 GPIO_ACTIVE_LOW>; ++}; ++ ++&vchiq { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++/ { ++ __overrides__ { ++ audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_hdmi=0'}"; ++ ++ act_led_gpio = <&led_act>,"gpios:4"; ++ act_led_activelow = <&led_act>,"gpios:8"; ++ act_led_trigger = <&led_act>,"linux,default-trigger"; ++ cam0_reg = <&cam0_reg>,"status"; ++ cam0_reg_gpio = <&cam0_reg>,"gpio:4"; ++ cam1_reg = <&cam1_reg>,"status"; ++ cam1_reg_gpio = <&cam1_reg>,"gpio:4"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/broadcom/bcm2710-rpi-zero-2-w.dts b/arch/arm/boot/dts/broadcom/bcm2710-rpi-zero-2-w.dts +new file mode 100644 +index 000000000000..8cf0f45d3950 +--- /dev/null ++++ b/arch/arm/boot/dts/broadcom/bcm2710-rpi-zero-2-w.dts +@@ -0,0 +1,272 @@ ++/dts-v1/; ++ ++#include "bcm2710.dtsi" ++#include "bcm2709-rpi.dtsi" ++#include "bcm283x-rpi-csi1-2lane.dtsi" ++#include "bcm283x-rpi-i2c0mux_0_44.dtsi" ++#include "bcm2708-rpi-bt.dtsi" ++#include "bcm283x-rpi-led-deprecated.dtsi" ++ ++/ { ++ compatible = "raspberrypi,model-zero-2-w", "brcm,bcm2837"; ++ model = "Raspberry Pi Zero 2 W"; ++ ++ chosen { ++ bootargs = "coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0"; ++ }; ++ ++ aliases { ++ serial0 = &uart1; ++ serial1 = &uart0; ++ mmc1 = &mmcnr; ++ }; ++}; ++ ++&gpio { ++ /* ++ * This is based on the official GPU firmware DT blob. ++ * ++ * Legend: ++ * "NC" = not connected (no rail from the SoC) ++ * "FOO" = GPIO line named "FOO" on the schematic ++ * "FOO_N" = GPIO line named "FOO" on schematic, active low ++ */ ++ gpio-line-names = "ID_SDA", ++ "ID_SCL", ++ "SDA1", ++ "SCL1", ++ "GPIO_GCLK", ++ "GPIO5", ++ "GPIO6", ++ "SPI_CE1_N", ++ "SPI_CE0_N", ++ "SPI_MISO", ++ "SPI_MOSI", ++ "SPI_SCLK", ++ "GPIO12", ++ "GPIO13", ++ /* Serial port */ ++ "TXD1", ++ "RXD1", ++ "GPIO16", ++ "GPIO17", ++ "GPIO18", ++ "GPIO19", ++ "GPIO20", ++ "GPIO21", ++ "GPIO22", ++ "GPIO23", ++ "GPIO24", ++ "GPIO25", ++ "GPIO26", ++ "GPIO27", ++ "HDMI_HPD_N", ++ "STATUS_LED_N", ++ /* Used by BT module */ ++ "CTS0", ++ "RTS0", ++ "TXD0", ++ "RXD0", ++ /* Used by Wifi */ ++ "SD1_CLK", ++ "SD1_CMD", ++ "SD1_DATA0", ++ "SD1_DATA1", ++ "SD1_DATA2", ++ "SD1_DATA3", ++ "CAM_GPIO1", /* GPIO40 */ ++ "WL_ON", /* GPIO41 */ ++ "BT_ON", /* GPIO42 */ ++ "WIFI_CLK", /* GPIO43 */ ++ "SDA0", /* GPIO44 */ ++ "SCL0", /* GPIO45 */ ++ "SMPS_SCL", /* GPIO46 */ ++ "SMPS_SDA", /* GPIO47 */ ++ /* Used by SD Card */ ++ "SD_CLK_R", ++ "SD_CMD_R", ++ "SD_DATA0_R", ++ "SD_DATA1_R", ++ "SD_DATA2_R", ++ "SD_DATA3_R"; ++ ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ sdio_pins: sdio_pins { ++ brcm,pins = <34 35 36 37 38 39>; ++ brcm,function = <7>; // alt3 = SD1 ++ brcm,pull = <0 2 2 2 2 2>; ++ }; ++ ++ bt_pins: bt_pins { ++ brcm,pins = <43>; ++ brcm,function = <4>; /* alt0:GPCLK2 */ ++ brcm,pull = <0>; ++ }; ++ ++ uart0_pins: uart0_pins { ++ brcm,pins = <30 31 32 33>; ++ brcm,function = <7>; /* alt3=UART0 */ ++ brcm,pull = <2 0 0 2>; /* up none none up */ ++ }; ++ ++ uart1_pins: uart1_pins { ++ brcm,pins; ++ brcm,function; ++ brcm,pull; ++ }; ++ ++ uart1_bt_pins: uart1_bt_pins { ++ brcm,pins = <32 33 30 31>; ++ brcm,function = ; /* alt5=UART1 */ ++ brcm,pull = <0 2 2 0>; ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins = <>; ++ brcm,function = <>; ++ }; ++}; ++ ++&mmcnr { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdio_pins>; ++ bus-width = <4>; ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ brcmf: wifi@1 { ++ reg = <1>; ++ compatible = "brcm,bcm4329-fmac"; ++ ++ firmwares { ++ fw_43436p { ++ chipid = <43430>; ++ revmask = <4>; ++ fw_base = "brcm/brcmfmac43436-sdio"; ++ }; ++ fw_43436s { ++ chipid = <43430>; ++ revmask = <2>; ++ fw_base = "brcm/brcmfmac43436s-sdio"; ++ }; ++ }; ++ }; ++}; ++ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins &bt_pins>; ++ status = "okay"; ++}; ++ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart1_pins>; ++ status = "okay"; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++}; ++ ++&i2c0if { ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&led_act { ++ gpios = <&gpio 29 GPIO_ACTIVE_LOW>; ++ default-state = "off"; ++ linux,default-trigger = "actpwr"; ++}; ++ ++&hdmi { ++ hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>; ++}; ++ ++&vchiq { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++&bt { ++ shutdown-gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; ++}; ++ ++&minibt { ++ shutdown-gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; ++}; ++ ++&cam1_reg { ++ gpio = <&gpio 40 GPIO_ACTIVE_HIGH>; ++}; ++ ++cam0_reg: &cam_dummy_reg { ++}; ++ ++/ { ++ __overrides__ { ++ audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_hdmi=0'}"; ++ ++ act_led_gpio = <&led_act>,"gpios:4"; ++ act_led_activelow = <&led_act>,"gpios:8"; ++ act_led_trigger = <&led_act>,"linux,default-trigger"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/broadcom/bcm2710-rpi-zero-2.dts b/arch/arm/boot/dts/broadcom/bcm2710-rpi-zero-2.dts +new file mode 100644 +index 000000000000..daa12bd30d6b +--- /dev/null ++++ b/arch/arm/boot/dts/broadcom/bcm2710-rpi-zero-2.dts +@@ -0,0 +1 @@ ++#include "bcm2710-rpi-zero-2-w.dts" +diff --git a/arch/arm/boot/dts/broadcom/bcm2710.dtsi b/arch/arm/boot/dts/broadcom/bcm2710.dtsi +new file mode 100644 +index 000000000000..bdcdbb51fab8 +--- /dev/null ++++ b/arch/arm/boot/dts/broadcom/bcm2710.dtsi +@@ -0,0 +1,32 @@ ++#define i2c0 i2c0if ++#include "bcm2837.dtsi" ++#undef i2c0 ++#include "bcm270x.dtsi" ++ ++/ { ++ compatible = "brcm,bcm2837", "brcm,bcm2836"; ++ ++ arm-pmu { ++ compatible = "arm,cortex-a53-pmu", "arm,cortex-a7-pmu"; ++ }; ++ ++ soc { ++ dma-ranges = <0xc0000000 0x00000000 0x3f000000>, ++ <0x7e000000 0x3f000000 0x01000000>; ++ }; ++ ++ __overrides__ { ++ arm_freq = <&cpu0>, "clock-frequency:0", ++ <&cpu1>, "clock-frequency:0", ++ <&cpu2>, "clock-frequency:0", ++ <&cpu3>, "clock-frequency:0"; ++ }; ++}; ++ ++&system_timer { ++ status = "disabled"; ++}; ++ ++&vc4 { ++ status = "disabled"; ++}; +diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts +index d5f8823230db..e3ce216d0c22 100644 +--- a/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts ++++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts +@@ -1,10 +1,16 @@ + // SPDX-License-Identifier: GPL-2.0 + /dts-v1/; ++#define BCM2711 ++#define i2c0 i2c0if + #include "bcm2711.dtsi" ++#include "bcm283x-rpi-wifi-bt.dtsi" ++#undef i2c0 ++#include "bcm270x.dtsi" ++#define i2c0 i2c0mux + #include "bcm2711-rpi.dtsi" ++#undef i2c0 + #include "bcm283x-rpi-led-deprecated.dtsi" +-#include "bcm283x-rpi-usb-peripheral.dtsi" +-#include "bcm283x-rpi-wifi-bt.dtsi" ++//#include "bcm283x-rpi-usb-peripheral.dtsi" + + / { + compatible = "raspberrypi,4-model-b", "brcm,bcm2711"; +@@ -60,7 +66,7 @@ &expgpio { + "VDD_SD_IO_SEL", + "CAM_GPIO", /* 5 */ + "SD_PWR_ON", +- ""; ++ "SD_OC_N"; + }; + + &gpio { +@@ -241,3 +247,168 @@ &vec { + &wifi_pwrseq { + reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; + }; ++ ++// ============================================= ++// Downstream rpi- changes ++ ++#include "bcm271x-rpi-bt.dtsi" ++ ++/ { ++ soc { ++ /delete-node/ pixelvalve@7e807000; ++ /delete-node/ hdmi@7e902000; ++ }; ++}; ++ ++#include "bcm2711-rpi-ds.dtsi" ++#include "bcm283x-rpi-csi1-2lane.dtsi" ++#include "bcm283x-rpi-i2c0mux_0_44.dtsi" ++ ++/ { ++ chosen { ++ bootargs = "coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0"; ++ }; ++ ++ /delete-node/ wifi-pwrseq; ++}; ++ ++&mmcnr { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdio_pins>; ++ bus-width = <4>; ++ status = "okay"; ++}; ++ ++&uart0 { ++ pinctrl-0 = <&uart0_pins &bt_pins>; ++ status = "okay"; ++}; ++ ++&uart1 { ++ pinctrl-0 = <&uart1_pins>; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++}; ++ ++&gpio { ++ bt_pins: bt_pins { ++ brcm,pins = "-"; // non-empty to keep btuart happy, //4 = 0 ++ // to fool pinctrl ++ brcm,function = <0>; ++ brcm,pull = <2>; ++ }; ++ ++ uart0_pins: uart0_pins { ++ brcm,pins = <32 33>; ++ brcm,function = ; ++ brcm,pull = <0 2>; ++ }; ++ ++ uart1_pins: uart1_pins { ++ brcm,pins; ++ brcm,function; ++ brcm,pull; ++ }; ++ ++ uart1_bt_pins: uart1_bt_pins { ++ brcm,pins = <32 33 30 31>; ++ brcm,function = ; /* alt5=UART1 */ ++ brcm,pull = <0 2 2 0>; ++ }; ++}; ++ ++&i2c0if { ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++// ============================================= ++// Board specific stuff here ++ ++&sdhost { ++ status = "disabled"; ++}; ++ ++&phy1 { ++ led-modes = <0x00 0x08>; /* link/activity link */ ++}; ++ ++&gpio { ++ audio_pins: audio_pins { ++ brcm,pins = <40 41>; ++ brcm,function = <4>; ++ brcm,pull = <0>; ++ }; ++}; ++ ++&led_act { ++ default-state = "off"; ++ linux,default-trigger = "mmc0"; ++}; ++ ++&led_pwr { ++ default-state = "off"; ++}; ++ ++&pwm1 { ++ status = "disabled"; ++}; ++ ++&vchiq { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++&cam1_reg { ++ gpio = <&expgpio 5 GPIO_ACTIVE_HIGH>; ++}; ++ ++cam0_reg: &cam_dummy_reg { ++}; ++ ++/ { ++ __overrides__ { ++ audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=0'}"; ++ ++ act_led_gpio = <&led_act>,"gpios:4"; ++ act_led_activelow = <&led_act>,"gpios:8"; ++ act_led_trigger = <&led_act>,"linux,default-trigger"; ++ ++ pwr_led_gpio = <&led_pwr>,"gpios:4"; ++ pwr_led_activelow = <&led_pwr>,"gpios:8"; ++ pwr_led_trigger = <&led_pwr>,"linux,default-trigger"; ++ ++ eth_led0 = <&phy1>,"led-modes:0"; ++ eth_led1 = <&phy1>,"led-modes:4"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts b/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts +index 5a2869a18bd5..de36357cd73f 100644 +--- a/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts ++++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts +@@ -41,3 +41,44 @@ &led_pwr { + &pm { + /delete-property/ system-power-controller; + }; ++ ++// ============================================= ++// Downstream rpi- changes ++ ++&audio_pins { ++ brcm,pins = <>; ++ brcm,function = <>; ++}; ++ ++// Declare the LED but leave it disabled, in case a user wants to map it ++// to a GPIO on the header ++&led_act { ++ default-state = "off"; ++ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; ++ status = "disabled"; ++}; ++ ++&led_pwr { ++ default-state = "off"; ++}; ++ ++&cam1_reg { ++ /delete-property/ gpio; ++}; ++ ++cam0_reg: &cam_dummy_reg { ++}; ++ ++/ { ++ __overrides__ { ++ audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_hdmi=0'}"; ++ ++ act_led_gpio = <&led_act>,"gpios:4", ++ <&led_act>,"status=okay"; ++ act_led_activelow = <&led_act>,"gpios:8"; ++ act_led_trigger = <&led_act>,"linux,default-trigger"; ++ pwr_led_gpio = <&led_pwr>,"gpios:4"; ++ pwr_led_activelow = <&led_pwr>,"gpios:8"; ++ pwr_led_trigger = <&led_pwr>,"linux,default-trigger"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4.dts b/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4.dts +new file mode 100644 +index 000000000000..3df663553f5a +--- /dev/null ++++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4.dts +@@ -0,0 +1,443 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/dts-v1/; ++#define BCM2711 ++#define i2c0 i2c0if ++#include "bcm2711.dtsi" ++#include "bcm283x-rpi-wifi-bt.dtsi" ++#undef i2c0 ++#include "bcm270x.dtsi" ++#define i2c0 i2c0mux ++#include "bcm2711-rpi.dtsi" ++#undef i2c0 ++#include "bcm283x-rpi-led-deprecated.dtsi" ++//#include "bcm283x-rpi-usb-peripheral.dtsi" ++ ++/ { ++ compatible = "raspberrypi,4-compute-module", "brcm,bcm2711"; ++ model = "Raspberry Pi Compute Module 4"; ++ ++ chosen { ++ /* 8250 auxiliary UART instead of pl011 */ ++ stdout-path = "serial1:115200n8"; ++ }; ++ ++ sd_io_1v8_reg: sd_io_1v8_reg { ++ compatible = "regulator-gpio"; ++ regulator-name = "vdd-sd-io"; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-boot-on; ++ regulator-always-on; ++ regulator-settling-time-us = <5000>; ++ gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>; ++ states = <1800000 0x1>, ++ <3300000 0x0>; ++ status = "okay"; ++ }; ++ ++ sd_vcc_reg: sd_vcc_reg { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc-sd"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-boot-on; ++ enable-active-high; ++ gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>; ++ }; ++}; ++ ++&bt { ++ shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; ++}; ++ ++&ddc0 { ++ status = "okay"; ++}; ++ ++&ddc1 { ++ status = "okay"; ++}; ++ ++&expgpio { ++ gpio-line-names = "BT_ON", ++ "WL_ON", ++ "PWR_LED_OFF", ++ "ANT1", ++ "VDD_SD_IO_SEL", ++ "CAM_GPIO", ++ "SD_PWR_ON", ++ "ANT2"; ++ ++ ant1: ant1 { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-high; ++ }; ++ ++ ant2: ant2 { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ output-low; ++ }; ++}; ++ ++&gpio { ++ /* ++ * Parts taken from rpi_SCH_4b_4p0_reduced.pdf and ++ * the official GPU firmware DT blob. ++ * ++ * Legend: ++ * "FOO" = GPIO line named "FOO" on the schematic ++ * "FOO_N" = GPIO line named "FOO" on schematic, active low ++ */ ++ gpio-line-names = "ID_SDA", ++ "ID_SCL", ++ "SDA1", ++ "SCL1", ++ "GPIO_GCLK", ++ "GPIO5", ++ "GPIO6", ++ "SPI_CE1_N", ++ "SPI_CE0_N", ++ "SPI_MISO", ++ "SPI_MOSI", ++ "SPI_SCLK", ++ "GPIO12", ++ "GPIO13", ++ /* Serial port */ ++ "TXD1", ++ "RXD1", ++ "GPIO16", ++ "GPIO17", ++ "GPIO18", ++ "GPIO19", ++ "GPIO20", ++ "GPIO21", ++ "GPIO22", ++ "GPIO23", ++ "GPIO24", ++ "GPIO25", ++ "GPIO26", ++ "GPIO27", ++ "RGMII_MDIO", ++ "RGMIO_MDC", ++ /* Used by BT module */ ++ "CTS0", ++ "RTS0", ++ "TXD0", ++ "RXD0", ++ /* Used by Wifi */ ++ "SD1_CLK", ++ "SD1_CMD", ++ "SD1_DATA0", ++ "SD1_DATA1", ++ "SD1_DATA2", ++ "SD1_DATA3", ++ /* Shared with SPI flash */ ++ "PWM0_MISO", ++ "PWM1_MOSI", ++ "STATUS_LED_G_CLK", ++ "SPIFLASH_CE_N", ++ "SDA0", ++ "SCL0", ++ "RGMII_RXCLK", ++ "RGMII_RXCTL", ++ "RGMII_RXD0", ++ "RGMII_RXD1", ++ "RGMII_RXD2", ++ "RGMII_RXD3", ++ "RGMII_TXCLK", ++ "RGMII_TXCTL", ++ "RGMII_TXD0", ++ "RGMII_TXD1", ++ "RGMII_TXD2", ++ "RGMII_TXD3"; ++}; ++ ++&hdmi0 { ++ status = "okay"; ++}; ++ ++&hdmi1 { ++ status = "okay"; ++}; ++ ++&led_act { ++ gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; ++}; ++ ++&leds { ++ led_pwr: led-pwr { ++ label = "PWR"; ++ gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; ++ default-state = "keep"; ++ linux,default-trigger = "default-on"; ++ }; ++}; ++ ++&pixelvalve0 { ++ status = "okay"; ++}; ++ ++&pixelvalve1 { ++ status = "okay"; ++}; ++ ++&pixelvalve2 { ++ status = "okay"; ++}; ++ ++&pixelvalve4 { ++ status = "okay"; ++}; ++ ++&pwm1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>; ++ status = "okay"; ++}; ++ ++/* EMMC2 is used to drive the EMMC card */ ++&emmc2 { ++ bus-width = <8>; ++ vqmmc-supply = <&sd_io_1v8_reg>; ++ vmmc-supply = <&sd_vcc_reg>; ++ broken-cd; ++ status = "okay"; ++}; ++ ++&genet { ++ phy-handle = <&phy1>; ++ phy-mode = "rgmii-rxid"; ++ status = "okay"; ++}; ++ ++&genet_mdio { ++ phy1: ethernet-phy@0 { ++ /* No PHY interrupt */ ++ reg = <0x0>; ++ }; ++}; ++ ++&pcie0 { ++ pci@0,0 { ++ device_type = "pci"; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ ranges; ++ ++ reg = <0 0 0 0 0>; ++ }; ++}; ++ ++/* uart0 communicates with the BT module */ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>; ++ uart-has-rtscts; ++}; ++ ++/* uart1 is mapped to the pin header */ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart1_gpio14>; ++ status = "okay"; ++}; ++ ++&vc4 { ++ status = "okay"; ++}; ++ ++&vec { ++ status = "disabled"; ++}; ++ ++&wifi_pwrseq { ++ reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; ++}; ++ ++// ============================================= ++// Downstream rpi- changes ++ ++#include "bcm271x-rpi-bt.dtsi" ++ ++/ { ++ soc { ++ /delete-node/ pixelvalve@7e807000; ++ /delete-node/ hdmi@7e902000; ++ }; ++}; ++ ++#include "bcm2711-rpi-ds.dtsi" ++#include "bcm283x-rpi-csi0-2lane.dtsi" ++#include "bcm283x-rpi-csi1-4lane.dtsi" ++#include "bcm283x-rpi-i2c0mux_0_44.dtsi" ++ ++/ { ++ chosen { ++ bootargs = "coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0"; ++ }; ++ ++ /delete-node/ wifi-pwrseq; ++}; ++ ++&mmcnr { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdio_pins>; ++ bus-width = <4>; ++ status = "okay"; ++}; ++ ++&uart0 { ++ pinctrl-0 = <&uart0_pins &bt_pins>; ++ status = "okay"; ++}; ++ ++&uart1 { ++ pinctrl-0 = <&uart1_pins>; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++}; ++ ++&gpio { ++ bt_pins: bt_pins { ++ brcm,pins = "-"; // non-empty to keep btuart happy, //4 = 0 ++ // to fool pinctrl ++ brcm,function = <0>; ++ brcm,pull = <2>; ++ }; ++ ++ uart0_pins: uart0_pins { ++ brcm,pins = <32 33>; ++ brcm,function = ; ++ brcm,pull = <0 2>; ++ }; ++ ++ uart1_pins: uart1_pins { ++ brcm,pins; ++ brcm,function; ++ brcm,pull; ++ }; ++ ++ uart1_bt_pins: uart1_bt_pins { ++ brcm,pins = <32 33 30 31>; ++ brcm,function = ; /* alt5=UART1 */ ++ brcm,pull = <0 2 2 0>; ++ }; ++}; ++ ++&i2c0if { ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++// ============================================= ++// Board specific stuff here ++ ++&pcie0 { ++ brcm,enable-l1ss; ++}; ++ ++&sdhost { ++ status = "disabled"; ++}; ++ ++&phy1 { ++ led-modes = <0x00 0x08>; /* link/activity link */ ++}; ++ ++&gpio { ++ audio_pins: audio_pins { ++ brcm,pins = <>; ++ brcm,function = <>; ++ }; ++}; ++ ++&led_act { ++ default-state = "off"; ++ linux,default-trigger = "mmc0"; ++}; ++ ++&led_pwr { ++ default-state = "off"; ++}; ++ ++&pwm1 { ++ status = "disabled"; ++}; ++ ++&vchiq { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++cam0_reg: &cam1_reg { ++ gpio = <&expgpio 5 GPIO_ACTIVE_HIGH>; ++}; ++ ++/ { ++ __overrides__ { ++ audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_hdmi=0'}"; ++ ++ act_led_gpio = <&led_act>,"gpios:4"; ++ act_led_activelow = <&led_act>,"gpios:8"; ++ act_led_trigger = <&led_act>,"linux,default-trigger"; ++ ++ pwr_led_gpio = <&led_pwr>,"gpios:4"; ++ pwr_led_activelow = <&led_pwr>,"gpios:8"; ++ pwr_led_trigger = <&led_pwr>,"linux,default-trigger"; ++ ++ eth_led0 = <&phy1>,"led-modes:0"; ++ eth_led1 = <&phy1>,"led-modes:4"; ++ ++ ant1 = <&ant1>,"output-high?=on", ++ <&ant1>, "output-low?=off", ++ <&ant2>, "output-high?=off", ++ <&ant2>, "output-low?=on"; ++ ant2 = <&ant1>,"output-high?=off", ++ <&ant1>, "output-low?=on", ++ <&ant2>, "output-high?=on", ++ <&ant2>, "output-low?=off"; ++ noant = <&ant1>,"output-high?=off", ++ <&ant1>, "output-low?=on", ++ <&ant2>, "output-high?=off", ++ <&ant2>, "output-low?=on"; ++ ++ cam0_reg = <&cam0_reg>,"status"; ++ cam0_reg_gpio = <&cam0_reg>,"gpio:4", ++ <&cam0_reg>,"gpio:0=", <&gpio>; ++ cam1_reg = <&cam1_reg>,"status"; ++ cam1_reg_gpio = <&cam1_reg>,"gpio:4", ++ <&cam1_reg>,"gpio:0=", <&gpio>; ++ }; ++}; +diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4s.dts b/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4s.dts +new file mode 100644 +index 000000000000..c51ba974adca +--- /dev/null ++++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4s.dts +@@ -0,0 +1,295 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/dts-v1/; ++#define BCM2711 ++#define i2c0 i2c0if ++#include "bcm2711.dtsi" ++//#include "bcm283x-rpi-wifi-bt.dtsi" ++#undef i2c0 ++#include "bcm270x.dtsi" ++#define i2c0 i2c0mux ++#include "bcm2711-rpi.dtsi" ++#undef i2c0 ++#include "bcm283x-rpi-led-deprecated.dtsi" ++ ++/ { ++ compatible = "raspberrypi,4-compute-module-s", "brcm,bcm2711"; ++ model = "Raspberry Pi Compute Module 4S"; ++}; ++ ++&ddc0 { ++ status = "okay"; ++}; ++ ++&gpio { ++ /* ++ * Parts taken from rpi_SCH_4b_4p0_reduced.pdf and ++ * the official GPU firmware DT blob. ++ * ++ * Legend: ++ * "FOO" = GPIO line named "FOO" on the schematic ++ * "FOO_N" = GPIO line named "FOO" on schematic, active low ++ */ ++ gpio-line-names = "ID_SDA", ++ "ID_SCL", ++ "SDA1", ++ "SCL1", ++ "GPIO_GCLK", ++ "GPIO5", ++ "GPIO6", ++ "SPI_CE1_N", ++ "SPI_CE0_N", ++ "SPI_MISO", ++ "SPI_MOSI", ++ "SPI_SCLK", ++ "GPIO12", ++ "GPIO13", ++ /* Serial port */ ++ "TXD1", ++ "RXD1", ++ "GPIO16", ++ "GPIO17", ++ "GPIO18", ++ "GPIO19", ++ "GPIO20", ++ "GPIO21", ++ "GPIO22", ++ "GPIO23", ++ "GPIO24", ++ "GPIO25", ++ "GPIO26", ++ "GPIO27", ++ "GPIO28", ++ "GPIO29", ++ "GPIO30", ++ "GPIO31", ++ "GPIO32", ++ "GPIO33", ++ "GPIO34", ++ "GPIO35", ++ "GPIO36", ++ "GPIO37", ++ "GPIO38", ++ "GPIO39", ++ "PWM0_MISO", ++ "PWM1_MOSI", ++ "GPIO42", ++ "GPIO43", ++ "GPIO44", ++ "GPIO45"; ++}; ++ ++&hdmi0 { ++ status = "okay"; ++}; ++ ++&led_act { ++ gpios = <&virtgpio 0 GPIO_ACTIVE_HIGH>; ++}; ++ ++&pixelvalve0 { ++ status = "okay"; ++}; ++ ++&pixelvalve1 { ++ status = "okay"; ++}; ++ ++&pixelvalve2 { ++ status = "okay"; ++}; ++ ++&pixelvalve4 { ++ status = "okay"; ++}; ++ ++&pwm1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>; ++ status = "okay"; ++}; ++ ++/* EMMC2 is used to drive the EMMC card */ ++&emmc2 { ++ bus-width = <8>; ++ broken-cd; ++ status = "okay"; ++}; ++ ++&pcie0 { ++ status = "disabled"; ++}; ++ ++&vchiq { ++ interrupts = ; ++}; ++ ++&vc4 { ++ status = "okay"; ++}; ++ ++&vec { ++ status = "disabled"; ++}; ++ ++// ============================================= ++// Downstream rpi- changes ++ ++#include "bcm2711-rpi-ds.dtsi" ++ ++/ { ++ soc { ++ /delete-node/ pixelvalve@7e807000; ++ /delete-node/ hdmi@7e902000; ++ ++ virtgpio: virtgpio { ++ compatible = "brcm,bcm2835-virtgpio"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ firmware = <&firmware>; ++ status = "okay"; ++ }; ++ }; ++}; ++ ++#include "bcm283x-rpi-csi0-2lane.dtsi" ++#include "bcm283x-rpi-csi1-4lane.dtsi" ++#include "bcm283x-rpi-i2c0mux_0_28.dtsi" ++ ++/ { ++ chosen { ++ bootargs = "coherent_pool=1M snd_bcm2835.enable_headphones=0"; ++ }; ++ ++ aliases { ++ serial0 = &uart0; ++ serial1 = &uart1; ++ /delete-property/ i2c20; ++ /delete-property/ i2c21; ++ }; ++ ++ /delete-node/ wifi-pwrseq; ++}; ++ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins>; ++ status = "okay"; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++}; ++ ++&gpio { ++ uart0_pins: uart0_pins { ++ brcm,pins; ++ brcm,function; ++ brcm,pull; ++ }; ++}; ++ ++&i2c0if { ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++// ============================================= ++// Board specific stuff here ++ ++/* Enable USB in OTG-aware mode */ ++&usb { ++ compatible = "brcm,bcm2835-usb"; ++ dr_mode = "otg"; ++ g-np-tx-fifo-size = <32>; ++ g-rx-fifo-size = <558>; ++ g-tx-fifo-size = <512 512 512 512 512 256 256>; ++ status = "okay"; ++}; ++ ++&sdhost { ++ status = "disabled"; ++}; ++ ++&gpio { ++ audio_pins: audio_pins { ++ brcm,pins = <>; ++ brcm,function = <>; ++ }; ++}; ++ ++/* Permanently disable HDMI1 */ ++&hdmi1 { ++ compatible = "disabled"; ++}; ++ ++/* Permanently disable DDC1 */ ++&ddc1 { ++ compatible = "disabled"; ++}; ++ ++&led_act { ++ default-state = "off"; ++ linux,default-trigger = "mmc0"; ++}; ++ ++&pwm1 { ++ status = "disabled"; ++}; ++ ++&vchiq { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++&cam1_reg { ++ gpio = <&gpio 3 GPIO_ACTIVE_HIGH>; ++ status = "disabled"; ++}; ++ ++cam0_reg: &cam0_regulator { ++ gpio = <&gpio 31 GPIO_ACTIVE_HIGH>; ++ status = "disabled"; ++}; ++ ++/ { ++ __overrides__ { ++ audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_hdmi=0'}"; ++ ++ act_led_gpio = <&led_act>,"gpios:4"; ++ act_led_activelow = <&led_act>,"gpios:8"; ++ act_led_trigger = <&led_act>,"linux,default-trigger"; ++ ++ cam0_reg = <&cam0_reg>,"status"; ++ cam0_reg_gpio = <&cam0_reg>,"gpio:4"; ++ cam1_reg = <&cam1_reg>,"status"; ++ cam1_reg_gpio = <&cam1_reg>,"gpio:4"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-ds.dtsi b/arch/arm/boot/dts/broadcom/bcm2711-rpi-ds.dtsi +new file mode 100644 +index 000000000000..968db6362989 +--- /dev/null ++++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-ds.dtsi +@@ -0,0 +1,534 @@ ++// SPDX-License-Identifier: GPL-2.0 ++#include "bcm270x-rpi.dtsi" ++ ++/ { ++ chosen: chosen { ++ }; ++ ++ __overrides__ { ++ arm_freq; ++ eee = <&chosen>,"bootargs{on='',off='genet.eee=N'}"; ++ hdmi = <&hdmi0>,"status", ++ <&hdmi1>,"status"; ++ pcie = <&pcie0>,"status"; ++ sd = <&emmc2>,"status"; ++ ++ sd_poll_once = <&emmc2>, "non-removable?"; ++ spi_dma4 = <&spi0>, "dmas:0=", <&dma40>, ++ <&spi0>, "dmas:8=", <&dma40>; ++ i2s_dma4 = <&i2s>, "dmas:0=", <&dma40>, ++ <&i2s>, "dmas:8=", <&dma40>; ++ }; ++ ++ scb: scb { ++ /* Add a label */ ++ }; ++ ++ soc: soc { ++ /* Add a label */ ++ }; ++ ++ arm-pmu { ++ compatible = "arm,cortex-a72-pmu", "arm,armv8-pmuv3", "arm,cortex-a7-pmu"; ++ ++ }; ++ ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ ++ aliases { ++ uart2 = &uart2; ++ uart3 = &uart3; ++ uart4 = &uart4; ++ uart5 = &uart5; ++ serial0 = &uart1; ++ serial1 = &uart0; ++ serial2 = &uart2; ++ serial3 = &uart3; ++ serial4 = &uart4; ++ serial5 = &uart5; ++ mmc0 = &emmc2; ++ mmc1 = &mmcnr; ++ mmc2 = &sdhost; ++ i2c3 = &i2c3; ++ i2c4 = &i2c4; ++ i2c5 = &i2c5; ++ i2c6 = &i2c6; ++ i2c20 = &ddc0; ++ i2c21 = &ddc1; ++ spi3 = &spi3; ++ spi4 = &spi4; ++ spi5 = &spi5; ++ spi6 = &spi6; ++ /delete-property/ intc; ++ }; ++ ++ /* ++ * Add a node with a dma-ranges value that exists only to be found ++ * by of_dma_get_max_cpu_address, and hence limit the DMA zone. ++ */ ++ zone_dma { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ dma-ranges = <0x0 0x0 0x0 0x40000000>; ++ }; ++}; ++ ++&vc4 { ++ raspberrypi,firmware = <&firmware>; ++}; ++ ++&cma { ++ /* Limit cma to the lower 768MB to allow room for HIGHMEM on 32-bit */ ++ alloc-ranges = <0x0 0x00000000 0x30000000>; ++}; ++ ++&soc { ++ /* Add the physical <-> DMA mapping for the I/O space */ ++ dma-ranges = <0xc0000000 0x0 0x00000000 0x40000000>, ++ <0x7c000000 0x0 0xfc000000 0x03800000>; ++}; ++ ++&scb { ++ #size-cells = <2>; ++ ++ ranges = <0x0 0x7c000000 0x0 0xfc000000 0x0 0x03800000>, ++ <0x0 0x40000000 0x0 0xff800000 0x0 0x00800000>, ++ <0x6 0x00000000 0x6 0x00000000 0x0 0x40000000>, ++ <0x0 0x00000000 0x0 0x00000000 0x0 0xfc000000>; ++ dma-ranges = <0x4 0x7c000000 0x0 0xfc000000 0x0 0x03800000>, ++ <0x0 0x00000000 0x0 0x00000000 0x4 0x00000000>; ++ ++ dma40: dma@7e007b00 { ++ compatible = "brcm,bcm2711-dma"; ++ reg = <0x0 0x7e007b00 0x0 0x400>; ++ interrupts = ++ , /* dma4 11 */ ++ , /* dma4 12 */ ++ , /* dma4 13 */ ++ ; /* dma4 14 */ ++ interrupt-names = "dma11", ++ "dma12", ++ "dma13", ++ "dma14"; ++ #dma-cells = <1>; ++ brcm,dma-channel-mask = <0x7800>; ++ }; ++ ++ xhci: xhci@7e9c0000 { ++ compatible = "generic-xhci"; ++ status = "disabled"; ++ reg = <0x0 0x7e9c0000 0x0 0x100000>; ++ interrupts = ; ++ power-domains = <&power RPI_POWER_DOMAIN_USB>; ++ }; ++ ++ codec@7eb10000 { ++ compatible = "raspberrypi,rpivid-vid-decoder"; ++ reg = <0x0 0x7eb10000 0x0 0x1000>, /* INTC */ ++ <0x0 0x7eb00000 0x0 0x10000>; /* HEVC */ ++ reg-names = "intc", ++ "hevc"; ++ interrupts = ; ++ ++ clocks = <&firmware_clocks 11>; ++ clock-names = "hevc"; ++ }; ++}; ++ ++&pcie0 { ++ reg = <0x0 0x7d500000 0x0 0x9310>; ++ ranges = <0x02000000 0x0 0xc0000000 0x6 0x00000000 ++ 0x0 0x40000000>; ++}; ++ ++&genet { ++ reg = <0x0 0x7d580000 0x0 0x10000>; ++}; ++ ++&dma40 { ++ /* The VPU firmware uses DMA channel 11 for VCHIQ */ ++ brcm,dma-channel-mask = <0x7000>; ++}; ++ ++&vchiq { ++ compatible = "brcm,bcm2711-vchiq"; ++}; ++ ++&firmwarekms { ++ compatible = "raspberrypi,rpi-firmware-kms-2711"; ++ interrupts = ; ++}; ++ ++&smi { ++ interrupts = ; ++}; ++ ++&mmc { ++ interrupts = ; ++}; ++ ++&mmcnr { ++ interrupts = ; ++}; ++ ++&csi0 { ++ interrupts = ; ++}; ++ ++&csi1 { ++ interrupts = ; ++}; ++ ++&random { ++ compatible = "brcm,bcm2711-rng200"; ++ status = "okay"; ++}; ++ ++&usb { ++ /* Enable the FIQ support */ ++ reg = <0x7e980000 0x10000>, ++ <0x7e00b200 0x200>; ++ interrupts = , ++ ; ++ status = "disabled"; ++}; ++ ++&gpio { ++ interrupts = , ++ ; ++ ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = ; ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = ; ++ }; ++ ++ spi3_pins: spi3_pins { ++ brcm,pins = <1 2 3>; ++ brcm,function = ; ++ }; ++ ++ spi3_cs_pins: spi3_cs_pins { ++ brcm,pins = <0 24>; ++ brcm,function = ; ++ }; ++ ++ spi4_pins: spi4_pins { ++ brcm,pins = <5 6 7>; ++ brcm,function = ; ++ }; ++ ++ spi4_cs_pins: spi4_cs_pins { ++ brcm,pins = <4 25>; ++ brcm,function = ; ++ }; ++ ++ spi5_pins: spi5_pins { ++ brcm,pins = <13 14 15>; ++ brcm,function = ; ++ }; ++ ++ spi5_cs_pins: spi5_cs_pins { ++ brcm,pins = <12 26>; ++ brcm,function = ; ++ }; ++ ++ spi6_pins: spi6_pins { ++ brcm,pins = <19 20 21>; ++ brcm,function = ; ++ }; ++ ++ spi6_cs_pins: spi6_cs_pins { ++ brcm,pins = <18 27>; ++ brcm,function = ; ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = ; ++ brcm,pull = ; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = ; ++ brcm,pull = ; ++ }; ++ ++ i2c3_pins: i2c3 { ++ brcm,pins = <4 5>; ++ brcm,function = ; ++ brcm,pull = ; ++ }; ++ ++ i2c4_pins: i2c4 { ++ brcm,pins = <8 9>; ++ brcm,function = ; ++ brcm,pull = ; ++ }; ++ ++ i2c5_pins: i2c5 { ++ brcm,pins = <12 13>; ++ brcm,function = ; ++ brcm,pull = ; ++ }; ++ ++ i2c6_pins: i2c6 { ++ brcm,pins = <22 23>; ++ brcm,function = ; ++ brcm,pull = ; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = ; ++ }; ++ ++ sdio_pins: sdio_pins { ++ brcm,pins = <34 35 36 37 38 39>; ++ brcm,function = ; // alt3 = SD1 ++ brcm,pull = <0 2 2 2 2 2>; ++ }; ++ ++ uart2_pins: uart2_pins { ++ brcm,pins = <0 1>; ++ brcm,function = ; ++ brcm,pull = <0 2>; ++ }; ++ ++ uart3_pins: uart3_pins { ++ brcm,pins = <4 5>; ++ brcm,function = ; ++ brcm,pull = <0 2>; ++ }; ++ ++ uart4_pins: uart4_pins { ++ brcm,pins = <8 9>; ++ brcm,function = ; ++ brcm,pull = <0 2>; ++ }; ++ ++ uart5_pins: uart5_pins { ++ brcm,pins = <12 13>; ++ brcm,function = ; ++ brcm,pull = <0 2>; ++ }; ++}; ++ ++&emmc2 { ++ mmc-ddr-3_3v; ++}; ++ ++&vc4 { ++ status = "disabled"; ++}; ++ ++&pixelvalve0 { ++ status = "disabled"; ++}; ++ ++&pixelvalve1 { ++ status = "disabled"; ++}; ++ ++&pixelvalve2 { ++ status = "disabled"; ++}; ++ ++&pixelvalve3 { ++ status = "disabled"; ++}; ++ ++&pixelvalve4 { ++ status = "disabled"; ++}; ++ ++&hdmi0 { ++ reg = <0x7ef00700 0x300>, ++ <0x7ef00300 0x200>, ++ <0x7ef00f00 0x80>, ++ <0x7ef00f80 0x80>, ++ <0x7ef01b00 0x200>, ++ <0x7ef01f00 0x400>, ++ <0x7ef00200 0x80>, ++ <0x7ef04300 0x100>, ++ <0x7ef20000 0x100>, ++ <0x7ef00100 0x30>; ++ reg-names = "hdmi", ++ "dvp", ++ "phy", ++ "rm", ++ "packet", ++ "metadata", ++ "csc", ++ "cec", ++ "hd", ++ "intr2"; ++ clocks = <&firmware_clocks 13>, ++ <&firmware_clocks 14>, ++ <&dvp 0>, ++ <&clk_27MHz>; ++ dmas = <&dma40 (10|(1<<30)|(1<<24)|(10<<16)|(15<<20))>; ++ status = "disabled"; ++}; ++ ++&ddc0 { ++ status = "disabled"; ++}; ++ ++&hdmi1 { ++ reg = <0x7ef05700 0x300>, ++ <0x7ef05300 0x200>, ++ <0x7ef05f00 0x80>, ++ <0x7ef05f80 0x80>, ++ <0x7ef06b00 0x200>, ++ <0x7ef06f00 0x400>, ++ <0x7ef00280 0x80>, ++ <0x7ef09300 0x100>, ++ <0x7ef20000 0x100>, ++ <0x7ef00100 0x30>; ++ reg-names = "hdmi", ++ "dvp", ++ "phy", ++ "rm", ++ "packet", ++ "metadata", ++ "csc", ++ "cec", ++ "hd", ++ "intr2"; ++ clocks = <&firmware_clocks 13>, ++ <&firmware_clocks 14>, ++ <&dvp 1>, ++ <&clk_27MHz>; ++ dmas = <&dma40 (17|(1<<30)|(1<<24)|(10<<16)|(15<<20))>; ++ status = "disabled"; ++}; ++ ++&ddc1 { ++ status = "disabled"; ++}; ++ ++&dvp { ++ status = "disabled"; ++}; ++ ++&vec { ++ clocks = <&firmware_clocks 15>; ++}; ++ ++&aon_intr { ++ interrupts = ; ++ status = "disabled"; ++}; ++ ++&system_timer { ++ status = "disabled"; ++}; ++ ++&i2c0 { ++ /delete-property/ compatible; ++ /delete-property/ interrupts; ++}; ++ ++&i2c0if { ++ compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; ++ interrupts = ; ++}; ++ ++i2c_arm: &i2c1 {}; ++i2c_vc: &i2c0 {}; ++ ++&i2c3 { ++ pinctrl-0 = <&i2c3_pins>; ++ pinctrl-names = "default"; ++}; ++ ++&i2c4 { ++ pinctrl-0 = <&i2c4_pins>; ++ pinctrl-names = "default"; ++}; ++ ++&i2c5 { ++ pinctrl-0 = <&i2c5_pins>; ++ pinctrl-names = "default"; ++}; ++ ++&i2c6 { ++ pinctrl-0 = <&i2c6_pins>; ++ pinctrl-names = "default"; ++}; ++ ++&spi3 { ++ pinctrl-0 = <&spi3_pins &spi3_cs_pins>; ++ pinctrl-names = "default"; ++}; ++ ++&spi4 { ++ pinctrl-0 = <&spi4_pins &spi4_cs_pins>; ++ pinctrl-names = "default"; ++}; ++ ++&spi5 { ++ pinctrl-0 = <&spi5_pins &spi5_cs_pins>; ++ pinctrl-names = "default"; ++}; ++ ++&spi6 { ++ pinctrl-0 = <&spi6_pins &spi6_cs_pins>; ++ pinctrl-names = "default"; ++}; ++ ++&uart2 { ++ pinctrl-0 = <&uart2_pins>; ++ pinctrl-names = "default"; ++}; ++ ++&uart3 { ++ pinctrl-0 = <&uart3_pins>; ++ pinctrl-names = "default"; ++}; ++ ++&uart4 { ++ pinctrl-0 = <&uart4_pins>; ++ pinctrl-names = "default"; ++}; ++ ++&uart5 { ++ pinctrl-0 = <&uart5_pins>; ++ pinctrl-names = "default"; ++}; ++ ++/delete-node/ &v3d; ++ ++/ { ++ v3dbus: v3dbus { ++ compatible = "simple-bus"; ++ #address-cells = <1>; ++ #size-cells = <2>; ++ ranges = <0x7c500000 0x0 0xfc500000 0x0 0x03300000>, ++ <0x40000000 0x0 0xff800000 0x0 0x00800000>; ++ dma-ranges = <0x00000000 0x0 0x00000000 0x4 0x00000000>; ++ ++ v3d: v3d@7ec04000 { ++ compatible = "brcm,2711-v3d"; ++ reg = ++ <0x7ec00000 0x0 0x4000>, ++ <0x7ec04000 0x0 0x4000>; ++ reg-names = "hub", "core0"; ++ ++ power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>; ++ resets = <&pm BCM2835_RESET_V3D>; ++ clocks = <&firmware_clocks 5>; ++ clocks-names = "v3d"; ++ interrupts = ; ++ status = "disabled"; ++ }; ++ }; ++}; +diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi b/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi +index 98817a6675b9..7b9e946db985 100644 +--- a/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi ++++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi +@@ -15,6 +15,7 @@ aliases { + ethernet0 = &genet; + pcie0 = &pcie0; + blconfig = &blconfig; ++ blpubkey = &blpubkey; + }; + }; + +@@ -67,6 +68,18 @@ blconfig: nvram@0 { + no-map; + status = "disabled"; + }; ++ /* ++ * RPi4 will copy the binary public key blob (if present) from the bootloader ++ * into memory for use by the OS. ++ */ ++ blpubkey: nvram@1 { ++ compatible = "raspberrypi,bootloader-public-key", "nvmem-rmem"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ reg = <0x0 0x0 0x0>; ++ no-map; ++ status = "disabled"; ++ }; + }; + + &v3d { +diff --git a/arch/arm/boot/dts/broadcom/bcm271x-rpi-bt.dtsi b/arch/arm/boot/dts/broadcom/bcm271x-rpi-bt.dtsi +new file mode 100644 +index 000000000000..400efdc5f03c +--- /dev/null ++++ b/arch/arm/boot/dts/broadcom/bcm271x-rpi-bt.dtsi +@@ -0,0 +1,38 @@ ++// SPDX-License-Identifier: GPL-2.0 ++ ++&uart0 { ++ bt: bluetooth { ++ compatible = "brcm,bcm43438-bt"; ++ max-speed = <3000000>; ++ shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; ++ local-bd-address = [ 00 00 00 00 00 00 ]; ++ fallback-bd-address; // Don't override a valid address ++ status = "okay"; ++ }; ++}; ++ ++&uart1 { ++ minibt: bluetooth { ++ compatible = "brcm,bcm43438-bt"; ++ max-speed = <230400>; ++ shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; ++ local-bd-address = [ 00 00 00 00 00 00 ]; ++ fallback-bd-address; // Don't override a valid address ++ status = "disabled"; ++ }; ++}; ++ ++/ { ++ aliases { ++ bluetooth = &bt; ++ }; ++ ++ __overrides__ { ++ bdaddr = <&bt>,"local-bd-address[", ++ <&bt>,"fallback-bd-address?=0", ++ <&minibt>,"local-bd-address[", ++ <&minibt>,"fallback-bd-address?=0"; ++ krnbt = <&bt>,"status"; ++ krnbt_baudrate = <&bt>,"max-speed:0", <&minibt>,"max-speed:0"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/broadcom/bcm283x-rpi-csi0-2lane.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-csi0-2lane.dtsi +new file mode 100644 +index 000000000000..6e4ce8622b47 +--- /dev/null ++++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-csi0-2lane.dtsi +@@ -0,0 +1,4 @@ ++// SPDX-License-Identifier: GPL-2.0-only ++&csi0 { ++ brcm,num-data-lanes = <2>; ++}; +diff --git a/arch/arm/boot/dts/broadcom/bcm283x-rpi-csi1-2lane.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-csi1-2lane.dtsi +new file mode 100644 +index 000000000000..6938f4daacdc +--- /dev/null ++++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-csi1-2lane.dtsi +@@ -0,0 +1,4 @@ ++// SPDX-License-Identifier: GPL-2.0-only ++&csi1 { ++ brcm,num-data-lanes = <2>; ++}; +diff --git a/arch/arm/boot/dts/broadcom/bcm283x-rpi-csi1-4lane.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-csi1-4lane.dtsi +new file mode 100644 +index 000000000000..b37037437bee +--- /dev/null ++++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-csi1-4lane.dtsi +@@ -0,0 +1,4 @@ ++// SPDX-License-Identifier: GPL-2.0-only ++&csi1 { ++ brcm,num-data-lanes = <4>; ++}; +diff --git a/arch/arm/boot/dts/broadcom/bcm283x-rpi-i2c0mux_0_28.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-i2c0mux_0_28.dtsi +new file mode 100644 +index 000000000000..38f0074bce3f +--- /dev/null ++++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-i2c0mux_0_28.dtsi +@@ -0,0 +1,4 @@ ++&i2c0mux { ++ pinctrl-0 = <&i2c0_gpio0>; ++ pinctrl-1 = <&i2c0_gpio28>; ++}; +diff --git a/arch/arm/boot/dts/broadcom/bcm283x-rpi-i2c0mux_0_44.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-i2c0mux_0_44.dtsi +new file mode 100644 +index 000000000000..119946d878db +--- /dev/null ++++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-i2c0mux_0_44.dtsi +@@ -0,0 +1,4 @@ ++&i2c0mux { ++ pinctrl-0 = <&i2c0_gpio0>; ++ pinctrl-1 = <&i2c0_gpio44>; ++}; +diff --git a/arch/arm/boot/dts/overlays/Makefile b/arch/arm/boot/dts/overlays/Makefile +new file mode 100644 +index 000000000000..b4fbefe77316 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -0,0 +1,295 @@ ++# Overlays for the Raspberry Pi platform ++ ++dtb-$(CONFIG_ARCH_BCM2835) += overlay_map.dtb ++ ++dtbo-$(CONFIG_ARCH_BCM2835) += \ ++ act-led.dtbo \ ++ adafruit-st7735r.dtbo \ ++ adafruit18.dtbo \ ++ adau1977-adc.dtbo \ ++ adau7002-simple.dtbo \ ++ ads1015.dtbo \ ++ ads1115.dtbo \ ++ ads7846.dtbo \ ++ adv7282m.dtbo \ ++ adv728x-m.dtbo \ ++ akkordion-iqdacplus.dtbo \ ++ allo-boss-dac-pcm512x-audio.dtbo \ ++ allo-boss2-dac-audio.dtbo \ ++ allo-digione.dtbo \ ++ allo-katana-dac-audio.dtbo \ ++ allo-piano-dac-pcm512x-audio.dtbo \ ++ allo-piano-dac-plus-pcm512x-audio.dtbo \ ++ anyspi.dtbo \ ++ apds9960.dtbo \ ++ applepi-dac.dtbo \ ++ arducam-64mp.dtbo \ ++ arducam-pivariety.dtbo \ ++ at86rf233.dtbo \ ++ audioinjector-addons.dtbo \ ++ audioinjector-bare-i2s.dtbo \ ++ audioinjector-isolated-soundcard.dtbo \ ++ audioinjector-ultra.dtbo \ ++ audioinjector-wm8731-audio.dtbo \ ++ audiosense-pi.dtbo \ ++ audremap.dtbo \ ++ balena-fin.dtbo \ ++ camera-mux-2port.dtbo \ ++ camera-mux-4port.dtbo \ ++ cap1106.dtbo \ ++ chipdip-dac.dtbo \ ++ cirrus-wm5102.dtbo \ ++ cm-swap-i2c0.dtbo \ ++ cma.dtbo \ ++ crystalfontz-cfa050_pi_m.dtbo \ ++ cutiepi-panel.dtbo \ ++ dacberry400.dtbo \ ++ dht11.dtbo \ ++ dionaudio-kiwi.dtbo \ ++ dionaudio-loco.dtbo \ ++ dionaudio-loco-v2.dtbo \ ++ disable-bt.dtbo \ ++ disable-emmc2.dtbo \ ++ disable-wifi.dtbo \ ++ dpi18.dtbo \ ++ dpi18cpadhi.dtbo \ ++ dpi24.dtbo \ ++ draws.dtbo \ ++ dwc-otg.dtbo \ ++ dwc2.dtbo \ ++ edt-ft5406.dtbo \ ++ enc28j60.dtbo \ ++ enc28j60-spi2.dtbo \ ++ exc3000.dtbo \ ++ fbtft.dtbo \ ++ fe-pi-audio.dtbo \ ++ fsm-demo.dtbo \ ++ gc9a01.dtbo \ ++ ghost-amp.dtbo \ ++ goodix.dtbo \ ++ googlevoicehat-soundcard.dtbo \ ++ gpio-charger.dtbo \ ++ gpio-fan.dtbo \ ++ gpio-hog.dtbo \ ++ gpio-ir.dtbo \ ++ gpio-ir-tx.dtbo \ ++ gpio-key.dtbo \ ++ gpio-led.dtbo \ ++ gpio-no-bank0-irq.dtbo \ ++ gpio-no-irq.dtbo \ ++ gpio-poweroff.dtbo \ ++ gpio-shutdown.dtbo \ ++ hd44780-lcd.dtbo \ ++ hdmi-backlight-hwhack-gpio.dtbo \ ++ hifiberry-amp.dtbo \ ++ hifiberry-amp100.dtbo \ ++ hifiberry-amp3.dtbo \ ++ hifiberry-dac.dtbo \ ++ hifiberry-dacplus.dtbo \ ++ hifiberry-dacplusadc.dtbo \ ++ hifiberry-dacplusadcpro.dtbo \ ++ hifiberry-dacplusdsp.dtbo \ ++ hifiberry-dacplushd.dtbo \ ++ hifiberry-digi.dtbo \ ++ hifiberry-digi-pro.dtbo \ ++ highperi.dtbo \ ++ hy28a.dtbo \ ++ hy28b.dtbo \ ++ hy28b-2017.dtbo \ ++ i-sabre-q2m.dtbo \ ++ i2c-bcm2708.dtbo \ ++ i2c-fan.dtbo \ ++ i2c-gpio.dtbo \ ++ i2c-mux.dtbo \ ++ i2c-pwm-pca9685a.dtbo \ ++ i2c-rtc.dtbo \ ++ i2c-rtc-gpio.dtbo \ ++ i2c-sensor.dtbo \ ++ i2c0.dtbo \ ++ i2c1.dtbo \ ++ i2c3.dtbo \ ++ i2c4.dtbo \ ++ i2c5.dtbo \ ++ i2c6.dtbo \ ++ i2s-dac.dtbo \ ++ i2s-gpio28-31.dtbo \ ++ ilitek251x.dtbo \ ++ imx219.dtbo \ ++ imx258.dtbo \ ++ imx290.dtbo \ ++ imx296.dtbo \ ++ imx327.dtbo \ ++ imx378.dtbo \ ++ imx462.dtbo \ ++ imx477.dtbo \ ++ imx519.dtbo \ ++ imx708.dtbo \ ++ iqaudio-codec.dtbo \ ++ iqaudio-dac.dtbo \ ++ iqaudio-dacplus.dtbo \ ++ iqaudio-digi-wm8804-audio.dtbo \ ++ iqs550.dtbo \ ++ irs1125.dtbo \ ++ jedec-spi-nor.dtbo \ ++ justboom-both.dtbo \ ++ justboom-dac.dtbo \ ++ justboom-digi.dtbo \ ++ ltc294x.dtbo \ ++ max98357a.dtbo \ ++ maxtherm.dtbo \ ++ mbed-dac.dtbo \ ++ mcp23017.dtbo \ ++ mcp23s17.dtbo \ ++ mcp2515.dtbo \ ++ mcp2515-can0.dtbo \ ++ mcp2515-can1.dtbo \ ++ mcp251xfd.dtbo \ ++ mcp3008.dtbo \ ++ mcp3202.dtbo \ ++ mcp342x.dtbo \ ++ media-center.dtbo \ ++ merus-amp.dtbo \ ++ midi-uart0.dtbo \ ++ midi-uart1.dtbo \ ++ midi-uart2.dtbo \ ++ midi-uart3.dtbo \ ++ midi-uart4.dtbo \ ++ midi-uart5.dtbo \ ++ minipitft13.dtbo \ ++ miniuart-bt.dtbo \ ++ mipi-dbi-spi.dtbo \ ++ mlx90640.dtbo \ ++ mmc.dtbo \ ++ mpu6050.dtbo \ ++ mz61581.dtbo \ ++ ov2311.dtbo \ ++ ov5647.dtbo \ ++ ov7251.dtbo \ ++ ov9281.dtbo \ ++ papirus.dtbo \ ++ pca953x.dtbo \ ++ pcf857x.dtbo \ ++ pcie-32bit-dma.dtbo \ ++ pibell.dtbo \ ++ pifacedigital.dtbo \ ++ pifi-40.dtbo \ ++ pifi-dac-hd.dtbo \ ++ pifi-dac-zero.dtbo \ ++ pifi-mini-210.dtbo \ ++ piglow.dtbo \ ++ piscreen.dtbo \ ++ piscreen2r.dtbo \ ++ pisound.dtbo \ ++ pitft22.dtbo \ ++ pitft28-capacitive.dtbo \ ++ pitft28-resistive.dtbo \ ++ pitft35-resistive.dtbo \ ++ pps-gpio.dtbo \ ++ proto-codec.dtbo \ ++ pwm.dtbo \ ++ pwm-2chan.dtbo \ ++ pwm-ir-tx.dtbo \ ++ pwm1.dtbo \ ++ qca7000.dtbo \ ++ qca7000-uart0.dtbo \ ++ ramoops.dtbo \ ++ ramoops-pi4.dtbo \ ++ rotary-encoder.dtbo \ ++ rpi-backlight.dtbo \ ++ rpi-codeczero.dtbo \ ++ rpi-dacplus.dtbo \ ++ rpi-dacpro.dtbo \ ++ rpi-digiampplus.dtbo \ ++ rpi-ft5406.dtbo \ ++ rpi-poe.dtbo \ ++ rpi-poe-plus.dtbo \ ++ rpi-sense.dtbo \ ++ rpi-sense-v2.dtbo \ ++ rpi-tv.dtbo \ ++ rra-digidac1-wm8741-audio.dtbo \ ++ sainsmart18.dtbo \ ++ sc16is750-i2c.dtbo \ ++ sc16is752-i2c.dtbo \ ++ sc16is752-spi0.dtbo \ ++ sc16is752-spi1.dtbo \ ++ sdhost.dtbo \ ++ sdio.dtbo \ ++ seeed-can-fd-hat-v1.dtbo \ ++ seeed-can-fd-hat-v2.dtbo \ ++ sh1106-spi.dtbo \ ++ si446x-spi0.dtbo \ ++ smi.dtbo \ ++ smi-dev.dtbo \ ++ smi-nand.dtbo \ ++ spi-gpio35-39.dtbo \ ++ spi-gpio40-45.dtbo \ ++ spi-rtc.dtbo \ ++ spi0-0cs.dtbo \ ++ spi0-1cs.dtbo \ ++ spi0-2cs.dtbo \ ++ spi1-1cs.dtbo \ ++ spi1-2cs.dtbo \ ++ spi1-3cs.dtbo \ ++ spi2-1cs.dtbo \ ++ spi2-2cs.dtbo \ ++ spi2-3cs.dtbo \ ++ spi3-1cs.dtbo \ ++ spi3-2cs.dtbo \ ++ spi4-1cs.dtbo \ ++ spi4-2cs.dtbo \ ++ spi5-1cs.dtbo \ ++ spi5-2cs.dtbo \ ++ spi6-1cs.dtbo \ ++ spi6-2cs.dtbo \ ++ ssd1306.dtbo \ ++ ssd1306-spi.dtbo \ ++ ssd1331-spi.dtbo \ ++ ssd1351-spi.dtbo \ ++ superaudioboard.dtbo \ ++ sx150x.dtbo \ ++ tc358743.dtbo \ ++ tc358743-audio.dtbo \ ++ tinylcd35.dtbo \ ++ tpm-slb9670.dtbo \ ++ tpm-slb9673.dtbo \ ++ uart0.dtbo \ ++ uart1.dtbo \ ++ uart2.dtbo \ ++ uart3.dtbo \ ++ uart4.dtbo \ ++ uart5.dtbo \ ++ udrc.dtbo \ ++ ugreen-dabboard.dtbo \ ++ upstream.dtbo \ ++ upstream-pi4.dtbo \ ++ vc4-fkms-v3d.dtbo \ ++ vc4-fkms-v3d-pi4.dtbo \ ++ vc4-kms-dpi-generic.dtbo \ ++ vc4-kms-dpi-hyperpixel2r.dtbo \ ++ vc4-kms-dpi-hyperpixel4.dtbo \ ++ vc4-kms-dpi-hyperpixel4sq.dtbo \ ++ vc4-kms-dpi-panel.dtbo \ ++ vc4-kms-dsi-7inch.dtbo \ ++ vc4-kms-dsi-lt070me05000.dtbo \ ++ vc4-kms-dsi-lt070me05000-v2.dtbo \ ++ vc4-kms-dsi-waveshare-panel.dtbo \ ++ vc4-kms-kippah-7inch.dtbo \ ++ vc4-kms-v3d.dtbo \ ++ vc4-kms-v3d-pi4.dtbo \ ++ vc4-kms-vga666.dtbo \ ++ vga666.dtbo \ ++ vl805.dtbo \ ++ w1-gpio.dtbo \ ++ w1-gpio-pullup.dtbo \ ++ w5500.dtbo \ ++ watterott-display.dtbo \ ++ waveshare-can-fd-hat-mode-a.dtbo \ ++ waveshare-can-fd-hat-mode-b.dtbo \ ++ wittypi.dtbo \ ++ wm8960-soundcard.dtbo ++ ++targets += dtbs dtbs_install ++targets += $(dtbo-y) ++ ++always-y := $(dtbo-y) ++clean-files := *.dtbo +diff --git a/arch/arm/boot/dts/overlays/README b/arch/arm/boot/dts/overlays/README +new file mode 100644 +index 000000000000..1b6fe60d00e7 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/README +@@ -0,0 +1,4779 @@ ++Introduction ++============ ++ ++This directory contains Device Tree overlays. Device Tree makes it possible ++to support many hardware configurations with a single kernel and without the ++need to explicitly load or blacklist kernel modules. Note that this isn't a ++"pure" Device Tree configuration (c.f. MACH_BCM2835) - some on-board devices ++are still configured by the board support code, but the intention is to ++eventually reach that goal. ++ ++On Raspberry Pi, Device Tree usage is controlled from /boot/config.txt. By ++default, the Raspberry Pi kernel boots with device tree enabled. You can ++completely disable DT usage (for now) by adding: ++ ++ device_tree= ++ ++to your config.txt, which should cause your Pi to revert to the old way of ++doing things after a reboot. ++ ++In /boot you will find a .dtb for each base platform. This describes the ++hardware that is part of the Raspberry Pi board. The loader (start.elf and its ++siblings) selects the .dtb file appropriate for the platform by name, and reads ++it into memory. At this point, all of the optional interfaces (i2c, i2s, spi) ++are disabled, but they can be enabled using Device Tree parameters: ++ ++ dtparam=i2c=on,i2s=on,spi=on ++ ++However, this shouldn't be necessary in many use cases because loading an ++overlay that requires one of those interfaces will cause it to be enabled ++automatically, and it is advisable to only enable interfaces if they are ++needed. ++ ++Configuring additional, optional hardware is done using Device Tree overlays ++(see below). ++ ++GPIO numbering uses the hardware pin numbering scheme (aka BCM scheme) and ++not the physical pin numbers. ++ ++raspi-config ++============ ++ ++The Advanced Options section of the raspi-config utility can enable and disable ++Device Tree use, as well as toggling the I2C and SPI interfaces. Note that it ++is possible to both enable an interface and blacklist the driver, if for some ++reason you should want to defer the loading. ++ ++Modules ++======= ++ ++As well as describing the hardware, Device Tree also gives enough information ++to allow suitable driver modules to be located and loaded, with the corollary ++that unneeded modules are not loaded. As a result it should be possible to ++remove lines from /etc/modules, and /etc/modprobe.d/raspi-blacklist.conf can ++have its contents deleted (or commented out). ++ ++Using Overlays ++============== ++ ++Overlays are loaded using the "dtoverlay" config.txt setting. As an example, ++consider I2C Real Time Clock drivers. In the pre-DT world these would be loaded ++by writing a magic string comprising a device identifier and an I2C address to ++a special file in /sys/class/i2c-adapter, having first loaded the driver for ++the I2C interface and the RTC device - something like this: ++ ++ modprobe i2c-bcm2835 ++ modprobe rtc-ds1307 ++ echo ds1307 0x68 > /sys/class/i2c-adapter/i2c-1/new_device ++ ++With DT enabled, this becomes a line in config.txt: ++ ++ dtoverlay=i2c-rtc,ds1307 ++ ++This causes the file /boot/overlays/i2c-rtc.dtbo to be loaded and a "node" ++describing the DS1307 I2C device to be added to the Device Tree for the Pi. By ++default it usees address 0x68, but this can be modified with an additional DT ++parameter: ++ ++ dtoverlay=i2c-rtc,ds1307,addr=0x68 ++ ++Parameters usually have default values, although certain parameters are ++mandatory. See the list of overlays below for a description of the parameters ++and their defaults. ++ ++Making new Overlays based on existing Overlays ++============================================== ++ ++Recent overlays have been designed in a more general way, so that they can be ++adapted to hardware by changing their parameters. When you have additional ++hardware with more than one device of a kind, you end up using the same overlay ++multiple times with other parameters, e.g. ++ ++ # 2 CAN FD interfaces on spi but with different pins ++ dtoverlay=mcp251xfd,spi0-0,interrupt=25 ++ dtoverlay=mcp251xfd,spi0-1,interrupt=24 ++ ++ # a realtime clock on i2c ++ dtoverlay=i2c-rtc,pcf85063 ++ ++While this approach does work, it requires knowledge about the hardware design. ++It is more feasible to simplify things for the end user by providing a single ++overlay as it is done the traditional way. ++ ++A new overlay can be generated by using ovmerge utility. ++https://github.com/raspberrypi/utils/blob/master/ovmerge/ovmerge ++ ++To generate an overlay for the above configuration we pass the configuration ++to ovmerge and add the -c flag. ++ ++ ovmerge -c mcp251xfd-overlay.dts,spi0-0,interrupt=25 \ ++ mcp251xfd-overlay.dts,spi0-1,interrupt=24 \ ++ i2c-rtc-overlay.dts,pcf85063 \ ++ >> merged-overlay.dts ++ ++The -c option writes the command above as a comment into the overlay as ++a marker that this overlay is generated and how it was generated. ++After compiling the overlay it can be loaded in a single line. ++ ++ dtoverlay=merged ++ ++It does the same as the original configuration but without parameters. ++ ++The Overlay and Parameter Reference ++=================================== ++ ++N.B. When editing this file, please preserve the indentation levels to make it ++simple to parse programmatically. NO HARD TABS. ++ ++ ++Name: ++Info: Configures the base Raspberry Pi hardware ++Load: ++Params: ++ ant1 Select antenna 1 (default). CM4 only. ++ ++ ant2 Select antenna 2. CM4 only. ++ ++ noant Disable both antennas. CM4 only. ++ ++ audio Set to "on" to enable the onboard ALSA audio ++ interface (default "off") ++ ++ axiperf Set to "on" to enable the AXI bus performance ++ monitors. ++ See /sys/kernel/debug/raspberrypi_axi_monitor ++ for the results. ++ ++ bdaddr Set an alternative Bluetooth address (BDADDR). ++ The value should be a 6-byte hexadecimal value, ++ with or without colon separators, written least- ++ significant-byte first. For example, ++ bdaddr=06:05:04:03:02:01 ++ will set the BDADDR to 01:02:03:04:05:06. ++ ++ cam0_reg Enables CAM 0 regulator. ++ Only required on CM1 & 3. ++ ++ cam0_reg_gpio Set GPIO for CAM 0 regulator. ++ Default 31 on CM1, 3, and 4S. ++ Default of GPIO expander 5 on CM4, but override ++ switches to normal GPIO. ++ ++ cam1_reg Enables CAM 1 regulator. ++ Only required on CM1 & 3. ++ ++ cam1_reg_gpio Set GPIO for CAM 1 regulator. ++ Default 3 on CM1, 3, and 4S. ++ Default of GPIO expander 5 on CM4, but override ++ switches to normal GPIO. ++ ++ eee Enable Energy Efficient Ethernet support for ++ compatible devices (default "on"). See also ++ "tx_lpi_timer". Pi3B+ only. ++ ++ eth_downshift_after Set the number of auto-negotiation failures ++ after which the 1000Mbps modes are disabled. ++ Legal values are 2, 3, 4, 5 and 0, where ++ 0 means never downshift (default 2). Pi3B+ only. ++ ++ eth_led0 Set mode of LED0 - amber on Pi3B+ (default "1"), ++ green on Pi4 (default "0"). ++ The legal values are: ++ ++ Pi3B+ ++ ++ 0=link/activity 1=link1000/activity ++ 2=link100/activity 3=link10/activity ++ 4=link100/1000/activity 5=link10/1000/activity ++ 6=link10/100/activity 14=off 15=on ++ ++ Pi4 ++ ++ 0=Speed/Activity 1=Speed ++ 2=Flash activity 3=FDX ++ 4=Off 5=On ++ 6=Alt 7=Speed/Flash ++ 8=Link 9=Activity ++ ++ eth_led1 Set mode of LED1 - green on Pi3B+ (default "6"), ++ amber on Pi4 (default "8"). See eth_led0 for ++ legal values. ++ ++ eth_max_speed Set the maximum speed a link is allowed ++ to negotiate. Legal values are 10, 100 and ++ 1000 (default 1000). Pi3B+ only. ++ ++ hdmi Set to "off" to disable the HDMI interface ++ (default "on") ++ ++ i2c_arm Set to "on" to enable the ARM's i2c interface ++ (default "off") ++ ++ i2c_vc Set to "on" to enable the i2c interface ++ usually reserved for the VideoCore processor ++ (default "off") ++ ++ i2c An alias for i2c_arm ++ ++ i2c_arm_baudrate Set the baudrate of the ARM's i2c interface ++ (default "100000") ++ ++ i2c_vc_baudrate Set the baudrate of the VideoCore i2c interface ++ (default "100000") ++ ++ i2c_baudrate An alias for i2c_arm_baudrate ++ ++ i2s Set to "on" to enable the i2s interface ++ (default "off") ++ ++ i2s_dma4 Use to enable 40-bit DMA on the i2s interface ++ (the assigned value doesn't matter) ++ (2711 only) ++ ++ krnbt Set to "off" to disable autoprobing of Bluetooth ++ driver without need of hciattach/btattach ++ (default "on") ++ ++ krnbt_baudrate Set the baudrate of the PL011 UART when used ++ with krnbt=on ++ ++ pcie Set to "off" to disable the PCIe interface ++ (default "on") ++ (2711 only, but not applicable on CM4S) ++ N.B. USB-A ports on 4B are subsequently disabled ++ ++ spi Set to "on" to enable the spi interfaces ++ (default "off") ++ ++ spi_dma4 Use to enable 40-bit DMA on spi interfaces ++ (the assigned value doesn't matter) ++ (2711 only) ++ ++ random Set to "on" to enable the hardware random ++ number generator (default "on") ++ ++ sd Set to "off" to disable the SD card (or eMMC on ++ non-lite SKU of CM4). ++ (default "on") ++ ++ sd_overclock Clock (in MHz) to use when the MMC framework ++ requests 50MHz ++ ++ sd_poll_once Looks for a card once after booting. Useful ++ for network booting scenarios to avoid the ++ overhead of continuous polling. N.B. Using ++ this option restricts the system to using a ++ single card per boot (or none at all). ++ (default off) ++ ++ sd_force_pio Disable DMA support for SD driver (default off) ++ ++ sd_pio_limit Number of blocks above which to use DMA for ++ SD card (default 1) ++ ++ sd_debug Enable debug output from SD driver (default off) ++ ++ sdio_overclock Clock (in MHz) to use when the MMC framework ++ requests 50MHz for the SDIO/WLAN interface. ++ ++ tx_lpi_timer Set the delay in microseconds between going idle ++ and entering the low power state (default 600). ++ Requires EEE to be enabled - see "eee". ++ ++ uart0 Set to "off" to disable uart0 (default "on") ++ ++ uart1 Set to "on" or "off" to enable or disable uart1 ++ (default varies) ++ ++ watchdog Set to "on" to enable the hardware watchdog ++ (default "off") ++ ++ act_led_trigger Choose which activity the LED tracks. ++ Use "heartbeat" for a nice load indicator. ++ (default "mmc") ++ ++ act_led_activelow Set to "on" to invert the sense of the LED ++ (default "off") ++ N.B. For Pi 3B, 3B+, 3A+ and 4B, use the act-led ++ overlay. ++ ++ act_led_gpio Set which GPIO to use for the activity LED ++ (in case you want to connect it to an external ++ device) ++ (default "16" on a non-Plus board, "47" on a ++ Plus or Pi 2) ++ N.B. For Pi 3B, 3B+, 3A+ and 4B, use the act-led ++ overlay. ++ ++ pwr_led_trigger ++ pwr_led_activelow ++ pwr_led_gpio ++ As for act_led_*, but using the PWR LED. ++ Not available on Model A/B boards. ++ ++ N.B. It is recommended to only enable those interfaces that are needed. ++ Leaving all interfaces enabled can lead to unwanted behaviour (i2c_vc ++ interfering with Pi Camera, I2S and SPI hogging GPIO pins, etc.) ++ Note also that i2c, i2c_arm and i2c_vc are aliases for the physical ++ interfaces i2c0 and i2c1. Use of the numeric variants is still possible ++ but deprecated because the ARM/VC assignments differ between board ++ revisions. The same board-specific mapping applies to i2c_baudrate, ++ and the other i2c baudrate parameters. ++ ++ ++Name: act-led ++Info: Pi 3B, 3B+, 3A+ and 4B use a GPIO expander to drive the LEDs which can ++ only be accessed from the VPU. There is a special driver for this with a ++ separate DT node, which has the unfortunate consequence of breaking the ++ act_led_gpio and act_led_activelow dtparams. ++ This overlay changes the GPIO controller back to the standard one and ++ restores the dtparams. ++Load: dtoverlay=act-led,= ++Params: activelow Set to "on" to invert the sense of the LED ++ (default "off") ++ ++ gpio Set which GPIO to use for the activity LED ++ (in case you want to connect it to an external ++ device) ++ REQUIRED ++ ++ ++Name: adafruit-st7735r ++Info: Overlay for the SPI-connected Adafruit 1.8" 160x128 or 128x128 displays, ++ based on the ST7735R chip. ++ This overlay uses the newer DRM/KMS "Tiny" driver. ++Load: dtoverlay=adafruit-st7735r,= ++Params: 128x128 Select the 128x128 driver (default 160x128) ++ rotate Display rotation {0,90,180,270} (default 90) ++ speed SPI bus speed in Hz (default 4000000) ++ dc_pin GPIO pin for D/C (default 24) ++ reset_pin GPIO pin for RESET (default 25) ++ led_pin GPIO used to control backlight (default 18) ++ ++ ++Name: adafruit18 ++Info: Overlay for the SPI-connected Adafruit 1.8" display (based on the ++ ST7735R chip). It includes support for the "green tab" version. ++ This overlay uses the older fbtft driver. ++Load: dtoverlay=adafruit18,= ++Params: green Use the adafruit18_green variant. ++ rotate Display rotation {0,90,180,270} ++ speed SPI bus speed in Hz (default 4000000) ++ fps Display frame rate in Hz ++ bgr Enable BGR mode (default off) ++ debug Debug output level {0-7} ++ dc_pin GPIO pin for D/C (default 24) ++ reset_pin GPIO pin for RESET (default 25) ++ led_pin GPIO used to control backlight (default 18) ++ ++ ++Name: adau1977-adc ++Info: Overlay for activation of ADAU1977 ADC codec over I2C for control ++ and I2S for data. ++Load: dtoverlay=adau1977-adc ++Params: ++ ++ ++Name: adau7002-simple ++Info: Overlay for the activation of ADAU7002 stereo PDM to I2S converter. ++Load: dtoverlay=adau7002-simple,= ++Params: card-name Override the default, "adau7002", card name. ++ ++ ++Name: ads1015 ++Info: Overlay for activation of Texas Instruments ADS1015 ADC over I2C ++Load: dtoverlay=ads1015,= ++Params: addr I2C bus address of device. Set based on how the ++ addr pin is wired. (default=0x48 assumes addr ++ is pulled to GND) ++ cha_enable Enable virtual channel a. (default=true) ++ cha_cfg Set the configuration for virtual channel a. ++ (default=4 configures this channel for the ++ voltage at A0 with respect to GND) ++ cha_datarate Set the datarate (samples/sec) for this channel. ++ (default=4 sets 1600 sps) ++ cha_gain Set the gain of the Programmable Gain ++ Amplifier for this channel. (default=2 sets the ++ full scale of the channel to 2.048 Volts) ++ ++ Channel (ch) parameters can be set for each enabled channel. ++ A maximum of 4 channels can be enabled (letters a thru d). ++ For more information refer to the device datasheet at: ++ http://www.ti.com/lit/ds/symlink/ads1015.pdf ++ ++ ++Name: ads1115 ++Info: Texas Instruments ADS1115 ADC ++Load: dtoverlay=ads1115,[=] ++Params: addr I2C bus address of device. Set based on how the ++ addr pin is wired. (default=0x48 assumes addr ++ is pulled to GND) ++ cha_enable Enable virtual channel a. ++ cha_cfg Set the configuration for virtual channel a. ++ (default=4 configures this channel for the ++ voltage at A0 with respect to GND) ++ cha_datarate Set the datarate (samples/sec) for this channel. ++ (default=7 sets 860 sps) ++ cha_gain Set the gain of the Programmable Gain ++ Amplifier for this channel. (Default 1 sets the ++ full scale of the channel to 4.096 Volts) ++ ++ Channel parameters can be set for each enabled channel. ++ A maximum of 4 channels can be enabled (letters a thru d). ++ For more information refer to the device datasheet at: ++ http://www.ti.com/lit/ds/symlink/ads1115.pdf ++ ++ ++Name: ads7846 ++Info: ADS7846 Touch controller ++Load: dtoverlay=ads7846,= ++Params: cs SPI bus Chip Select (default 1) ++ speed SPI bus speed (default 2MHz, max 3.25MHz) ++ penirq GPIO used for PENIRQ. REQUIRED ++ penirq_pull Set GPIO pull (default 0=none, 2=pullup) ++ swapxy Swap x and y axis ++ xmin Minimum value on the X axis (default 0) ++ ymin Minimum value on the Y axis (default 0) ++ xmax Maximum value on the X axis (default 4095) ++ ymax Maximum value on the Y axis (default 4095) ++ pmin Minimum reported pressure value (default 0) ++ pmax Maximum reported pressure value (default 65535) ++ xohms Touchpanel sensitivity (X-plate resistance) ++ (default 400) ++ ++ penirq is required and usually xohms (60-100) has to be set as well. ++ Apart from that, pmax (255) and swapxy are also common. ++ The rest of the calibration can be done with xinput-calibrator. ++ See: github.com/notro/fbtft/wiki/FBTFT-on-Raspian ++ Device Tree binding document: ++ www.kernel.org/doc/Documentation/devicetree/bindings/input/ads7846.txt ++ ++ ++Name: adv7282m ++Info: Analog Devices ADV7282M analogue video to CSI2 bridge. ++ Uses Unicam1, which is the standard camera connector on most Pi ++ variants. ++Load: dtoverlay=adv7282m,= ++Params: addr Overrides the I2C address (default 0x21) ++ media-controller Configure use of Media Controller API for ++ configuring the sensor (default off) ++ ++ ++Name: adv728x-m ++Info: Analog Devices ADV728[0|1|2]-M analogue video to CSI2 bridges. ++ This is a wrapper for adv7282m, and defaults to ADV7282M. ++Load: dtoverlay=adv728x-m,= ++Params: addr Overrides the I2C address (default 0x21) ++ adv7280m Select ADV7280-M. ++ adv7281m Select ADV7281-M. ++ adv7281ma Select ADV7281-MA. ++ media-controller Configure use of Media Controller API for ++ configuring the sensor (default off) ++ ++ ++Name: akkordion-iqdacplus ++Info: Configures the Digital Dreamtime Akkordion Music Player (based on the ++ OEM IQAudIO DAC+ or DAC Zero module). ++Load: dtoverlay=akkordion-iqdacplus,= ++Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec ++ Digital volume control. Enable with ++ dtoverlay=akkordion-iqdacplus,24db_digital_gain ++ (The default behaviour is that the Digital ++ volume control is limited to a maximum of ++ 0dB. ie. it can attenuate but not provide ++ gain. For most users, this will be desired ++ as it will prevent clipping. By appending ++ the 24db_digital_gain parameter, the Digital ++ volume control will allow up to 24dB of ++ gain. If this parameter is enabled, it is the ++ responsibility of the user to ensure that ++ the Digital volume control is set to a value ++ that does not result in clipping/distortion!) ++ ++ ++Name: allo-boss-dac-pcm512x-audio ++Info: Configures the Allo Boss DAC audio cards. ++Load: dtoverlay=allo-boss-dac-pcm512x-audio, ++Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec ++ Digital volume control. Enable with ++ "dtoverlay=allo-boss-dac-pcm512x-audio, ++ 24db_digital_gain" ++ (The default behaviour is that the Digital ++ volume control is limited to a maximum of ++ 0dB. ie. it can attenuate but not provide ++ gain. For most users, this will be desired ++ as it will prevent clipping. By appending ++ the 24db_digital_gain parameter, the Digital ++ volume control will allow up to 24dB of ++ gain. If this parameter is enabled, it is the ++ responsibility of the user to ensure that ++ the Digital volume control is set to a value ++ that does not result in clipping/distortion!) ++ slave Force Boss DAC into slave mode, using Pi a ++ master for bit clock and frame clock. Enable ++ with "dtoverlay=allo-boss-dac-pcm512x-audio, ++ slave" ++ ++ ++Name: allo-boss2-dac-audio ++Info: Configures the Allo Boss2 DAC audio card ++Load: dtoverlay=allo-boss2-dac-audio ++Params: ++ ++ ++Name: allo-digione ++Info: Configures the Allo Digione audio card ++Load: dtoverlay=allo-digione ++Params: ++ ++ ++Name: allo-katana-dac-audio ++Info: Configures the Allo Katana DAC audio card ++Load: dtoverlay=allo-katana-dac-audio ++Params: ++ ++ ++Name: allo-piano-dac-pcm512x-audio ++Info: Configures the Allo Piano DAC (2.0/2.1) audio cards. ++ (NB. This initial support is for 2.0 channel audio ONLY! ie. stereo. ++ The subwoofer outputs on the Piano 2.1 are not currently supported!) ++Load: dtoverlay=allo-piano-dac-pcm512x-audio, ++Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec ++ Digital volume control. ++ (The default behaviour is that the Digital ++ volume control is limited to a maximum of ++ 0dB. ie. it can attenuate but not provide ++ gain. For most users, this will be desired ++ as it will prevent clipping. By appending ++ the 24db_digital_gain parameter, the Digital ++ volume control will allow up to 24dB of ++ gain. If this parameter is enabled, it is the ++ responsibility of the user to ensure that ++ the Digital volume control is set to a value ++ that does not result in clipping/distortion!) ++ ++ ++Name: allo-piano-dac-plus-pcm512x-audio ++Info: Configures the Allo Piano DAC (2.1) audio cards. ++Load: dtoverlay=allo-piano-dac-plus-pcm512x-audio, ++Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec ++ Digital volume control. ++ (The default behaviour is that the Digital ++ volume control is limited to a maximum of ++ 0dB. ie. it can attenuate but not provide ++ gain. For most users, this will be desired ++ as it will prevent clipping. By appending ++ the 24db_digital_gain parameter, the Digital ++ volume control will allow up to 24dB of ++ gain. If this parameter is enabled, it is the ++ responsibility of the user to ensure that ++ the Digital volume control is set to a value ++ that does not result in clipping/distortion!) ++ glb_mclk This option is only with Kali board. If enabled, ++ MCLK for Kali is used and PLL is disabled for ++ better voice quality. (default Off) ++ ++ ++Name: anyspi ++Info: Universal device tree overlay for SPI devices ++ ++ Just specify the SPI address and device name ("compatible" property). ++ This overlay lacks any device-specific parameter support! ++ ++ For devices on spi1 or spi2, the interfaces should be enabled ++ with one of the spi1-1/2/3cs and/or spi2-1/2/3cs overlays. ++ ++ Examples: ++ 1. SPI NOR flash on spi0.1, maximum SPI clock frequency 45MHz: ++ dtoverlay=anyspi:spi0-1,dev="jedec,spi-nor",speed=45000000 ++ 2. MCP3204 ADC on spi1.2, maximum SPI clock frequency 500kHz: ++ dtoverlay=anyspi:spi1-2,dev="microchip,mcp3204" ++Load: dtoverlay=anyspi,= ++Params: spi- Configure device at spi, cs ++ (boolean, required) ++ dev Set device name to search compatible module ++ (string, required) ++ speed Set SPI clock frequency in Hz ++ (integer, optional, default 500000) ++ ++ ++Name: apds9960 ++Info: Configures the AVAGO APDS9960 digital proximity, ambient light, RGB and ++ gesture sensor ++Load: dtoverlay=apds9960,= ++Params: gpiopin GPIO used for INT (default 4) ++ noints Disable the interrupt GPIO line. ++ ++ ++Name: applepi-dac ++Info: Configures the Orchard Audio ApplePi-DAC audio card ++Load: dtoverlay=applepi-dac ++Params: ++ ++ ++Name: arducam-64mp ++Info: Arducam 64MP camera module. ++ Uses Unicam 1, which is the standard camera connector on most Pi ++ variants. ++Load: dtoverlay=arducam-64mp,= ++Params: rotation Mounting rotation of the camera sensor (0 or ++ 180, default 0) ++ orientation Sensor orientation (0 = front, 1 = rear, ++ 2 = external, default external) ++ media-controller Configure use of Media Controller API for ++ configuring the sensor (default on) ++ cam0 Adopt the default configuration for CAM0 on a ++ Compute Module (CSI0, i2c_vc, and cam0_reg). ++ vcm Select lens driver state. Default is enabled, ++ but vcm=off will disable. ++ ++ ++Name: arducam-pivariety ++Info: Arducam Pivariety camera module. ++ Uses Unicam 1, which is the standard camera connector on most Pi ++ variants. ++Load: dtoverlay=arducam-pivariety,= ++Params: rotation Mounting rotation of the camera sensor (0 or ++ 180, default 0) ++ orientation Sensor orientation (0 = front, 1 = rear, ++ 2 = external, default external) ++ media-controller Configure use of Media Controller API for ++ configuring the sensor (default on) ++ cam0 Adopt the default configuration for CAM0 on a ++ Compute Module (CSI0, i2c_vc, and cam0_reg). ++ ++ ++Name: at86rf233 ++Info: Configures the Atmel AT86RF233 802.15.4 low-power WPAN transceiver, ++ connected to spi0.0 ++Load: dtoverlay=at86rf233,= ++Params: interrupt GPIO used for INT (default 23) ++ reset GPIO used for Reset (default 24) ++ sleep GPIO used for Sleep (default 25) ++ speed SPI bus speed in Hz (default 3000000) ++ trim Fine tuning of the internal capacitance ++ arrays (0=+0pF, 15=+4.5pF, default 15) ++ ++ ++Name: audioinjector-addons ++Info: Configures the audioinjector.net audio add on soundcards ++Load: dtoverlay=audioinjector-addons,= ++Params: non-stop-clocks Keeps the clocks running even when the stream ++ is paused or stopped (default off) ++ ++ ++Name: audioinjector-bare-i2s ++Info: Configures the audioinjector.net audio bare i2s soundcard ++Load: dtoverlay=audioinjector-bare-i2s ++Params: ++ ++ ++Name: audioinjector-isolated-soundcard ++Info: Configures the audioinjector.net isolated soundcard ++Load: dtoverlay=audioinjector-isolated-soundcard ++Params: ++ ++ ++Name: audioinjector-ultra ++Info: Configures the audioinjector.net ultra soundcard ++Load: dtoverlay=audioinjector-ultra ++Params: ++ ++ ++Name: audioinjector-wm8731-audio ++Info: Configures the audioinjector.net audio add on soundcard ++Load: dtoverlay=audioinjector-wm8731-audio ++Params: ++ ++ ++Name: audiosense-pi ++Info: Configures the audiosense-pi add on soundcard ++ For more information refer to ++ https://gitlab.com/kakar0t/audiosense-pi ++Load: dtoverlay=audiosense-pi ++Params: ++ ++ ++Name: audremap ++Info: Switches PWM sound output to GPIOs on the 40-pin header ++Load: dtoverlay=audremap,= ++Params: swap_lr Reverse the channel allocation, which will also ++ swap the audio jack outputs (default off) ++ enable_jack Don't switch off the audio jack output. Does ++ nothing on BCM2711 (default off) ++ pins_12_13 Select GPIOs 12 & 13 (default) ++ pins_18_19 Select GPIOs 18 & 19 ++ pins_40_41 Select GPIOs 40 & 41 (not available on CM4, used ++ for other purposes) ++ pins_40_45 Select GPIOs 40 & 45 (don't use on BCM2711 - the ++ pins are on different controllers) ++ ++ ++Name: balena-fin ++Info: Overlay that enables WLAN, Bluetooth and the GPIO expander on the ++ balenaFin carrier board for the Raspberry Pi Compute Module 3/3+ Lite. ++Load: dtoverlay=balena-fin ++Params: ++ ++ ++Name: bmp085_i2c-sensor ++Info: This overlay is now deprecated - see i2c-sensor ++Load: ++ ++ ++Name: camera-mux-2port ++Info: Configures a 2 port camera multiplexer ++ Note that currently ALL IMX290 modules share a common clock, therefore ++ all modules will need to have the same clock frequency. ++Load: dtoverlay=camera-mux-2port,= ++Params: cam0-arducam-64mp Select Arducam64MP for camera on port 0 ++ cam0-imx219 Select IMX219 for camera on port 0 ++ cam0-imx258 Select IMX258 for camera on port 0 ++ cam0-imx290 Select IMX290 for camera on port 0 ++ cam0-imx477 Select IMX477 for camera on port 0 ++ cam0-imx519 Select IMX519 for camera on port 0 ++ cam0-imx708 Select IMX708 for camera on port 0 ++ cam0-ov2311 Select OV2311 for camera on port 0 ++ cam0-ov5647 Select OV5647 for camera on port 0 ++ cam0-ov7251 Select OV7251 for camera on port 0 ++ cam0-ov9281 Select OV9281 for camera on port 0 ++ cam0-imx290-clk-freq Set clock frequency for an IMX290 on port 0 ++ cam1-arducam-64mp Select Arducam64MP for camera on port 1 ++ cam1-imx219 Select IMX219 for camera on port 1 ++ cam1-imx258 Select IMX258 for camera on port 1 ++ cam1-imx290 Select IMX290 for camera on port 1 ++ cam1-imx477 Select IMX477 for camera on port 1 ++ cam1-imx519 Select IMX519 for camera on port 1 ++ cam1-imx708 Select IMX708 for camera on port 1 ++ cam1-ov2311 Select OV2311 for camera on port 1 ++ cam1-ov5647 Select OV5647 for camera on port 1 ++ cam1-ov7251 Select OV7251 for camera on port 1 ++ cam1-ov9281 Select OV9281 for camera on port 1 ++ cam1-imx290-clk-freq Set clock frequency for an IMX290 on port 1 ++ ++ ++Name: camera-mux-4port ++Info: Configures a 4 port camera multiplexer ++ Note that currently ALL IMX290 modules share a common clock, therefore ++ all modules will need to have the same clock frequency. ++Load: dtoverlay=camera-mux-4port,= ++Params: cam0-arducam-64mp Select Arducam64MP for camera on port 0 ++ cam0-imx219 Select IMX219 for camera on port 0 ++ cam0-imx258 Select IMX258 for camera on port 0 ++ cam0-imx290 Select IMX290 for camera on port 0 ++ cam0-imx477 Select IMX477 for camera on port 0 ++ cam0-imx519 Select IMX519 for camera on port 0 ++ cam0-imx708 Select IMX708 for camera on port 0 ++ cam0-ov2311 Select OV2311 for camera on port 0 ++ cam0-ov5647 Select OV5647 for camera on port 0 ++ cam0-ov7251 Select OV7251 for camera on port 0 ++ cam0-ov9281 Select OV9281 for camera on port 0 ++ cam0-imx290-clk-freq Set clock frequency for an IMX290 on port 0 ++ cam1-arducam-64mp Select Arducam64MP for camera on port 1 ++ cam1-imx219 Select IMX219 for camera on port 1 ++ cam1-imx258 Select IMX258 for camera on port 1 ++ cam1-imx290 Select IMX290 for camera on port 1 ++ cam1-imx477 Select IMX477 for camera on port 1 ++ cam1-imx519 Select IMX519 for camera on port 1 ++ cam1-imx708 Select IMX708 for camera on port 1 ++ cam1-ov2311 Select OV2311 for camera on port 1 ++ cam1-ov5647 Select OV5647 for camera on port 1 ++ cam1-ov7251 Select OV7251 for camera on port 1 ++ cam1-ov9281 Select OV9281 for camera on port 1 ++ cam1-imx290-clk-freq Set clock frequency for an IMX290 on port 1 ++ cam2-arducam-64mp Select Arducam64MP for camera on port 2 ++ cam2-imx219 Select IMX219 for camera on port 2 ++ cam2-imx258 Select IMX258 for camera on port 2 ++ cam2-imx290 Select IMX290 for camera on port 2 ++ cam2-imx477 Select IMX477 for camera on port 2 ++ cam2-imx519 Select IMX519 for camera on port 2 ++ cam2-imx708 Select IMX708 for camera on port 2 ++ cam2-ov2311 Select OV2311 for camera on port 2 ++ cam2-ov5647 Select OV5647 for camera on port 2 ++ cam2-ov7251 Select OV7251 for camera on port 2 ++ cam2-ov9281 Select OV9281 for camera on port 2 ++ cam2-imx290-clk-freq Set clock frequency for an IMX290 on port 2 ++ cam3-arducam-64mp Select Arducam64MP for camera on port 3 ++ cam3-imx219 Select IMX219 for camera on port 3 ++ cam3-imx258 Select IMX258 for camera on port 3 ++ cam3-imx290 Select IMX290 for camera on port 3 ++ cam3-imx477 Select IMX477 for camera on port 3 ++ cam3-imx519 Select IMX519 for camera on port 3 ++ cam3-imx708 Select IMX708 for camera on port 3 ++ cam3-ov2311 Select OV2311 for camera on port 3 ++ cam3-ov5647 Select OV5647 for camera on port 3 ++ cam3-ov7251 Select OV7251 for camera on port 3 ++ cam3-ov9281 Select OV9281 for camera on port 3 ++ cam3-imx290-clk-freq Set clock frequency for an IMX290 on port 3 ++ ++ ++Name: cap1106 ++Info: Enables the ability to use the cap1106 touch sensor as a keyboard ++Load: dtoverlay=cap1106,= ++Params: int_pin GPIO pin for interrupt signal (default 23) ++ ++ ++Name: chipdip-dac ++Info: Configures Chip Dip audio cards. ++Load: dtoverlay=chipdip-dac ++Params: ++ ++ ++Name: cirrus-wm5102 ++Info: Configures the Cirrus Logic Audio Card ++Load: dtoverlay=cirrus-wm5102 ++Params: ++ ++ ++Name: cm-swap-i2c0 ++Info: Largely for Compute Modules 1&3 where the original instructions for ++ adding a camera used GPIOs 0&1 for CAM1 and 28&29 for CAM0, whilst all ++ other platforms use 28&29 (or 44&45) for CAM1. ++ The default assignment through using this overlay is for ++ i2c0 to use 28&29, and i2c10 (aka i2c_csi_dsi) to use 28&29, but the ++ overrides allow this to be changed. ++Load: dtoverlay=cm-swap-i2c0,= ++Params: i2c0-gpio0 Use GPIOs 0&1 for i2c0 ++ i2c0-gpio28 Use GPIOs 28&29 for i2c0 (default) ++ i2c0-gpio44 Use GPIOs 44&45 for i2c0 ++ i2c10-gpio0 Use GPIOs 0&1 for i2c0 (default) ++ i2c10-gpio28 Use GPIOs 28&29 for i2c0 ++ i2c10-gpio44 Use GPIOs 44&45 for i2c0 ++ ++ ++Name: cma ++Info: Set custom CMA sizes, only use if you know what you are doing, might ++ clash with other overlays like vc4-fkms-v3d and vc4-kms-v3d. ++Load: dtoverlay=cma,= ++Params: cma-512 CMA is 512MB (needs 1GB) ++ cma-448 CMA is 448MB (needs 1GB) ++ cma-384 CMA is 384MB (needs 1GB) ++ cma-320 CMA is 320MB (needs 1GB) ++ cma-256 CMA is 256MB (needs 1GB) ++ cma-192 CMA is 192MB (needs 1GB) ++ cma-128 CMA is 128MB ++ cma-96 CMA is 96MB ++ cma-64 CMA is 64MB ++ cma-size CMA size in bytes, 4MB aligned ++ cma-default Use upstream's default value ++ ++ ++Name: crystalfontz-cfa050_pi_m ++Info: Configures the Crystalfontz CFA050-PI-M series of Raspberry Pi CM4 ++ based modules using the CFA7201280A0_050Tx 7" TFT LCD displays, ++ with or without capacitive touch screen. ++ Requires use of vc4-kms-v3d. ++Load: dtoverlay=crystalfontz-cfa050_pi_m,= ++Params: captouch Enable capacitive touch display ++ ++ ++Name: cutiepi-panel ++Info: 8" TFT LCD display and touch panel used by cutiepi.io ++Load: dtoverlay=cutiepi-panel ++Params: ++ ++ ++Name: dacberry400 ++Info: Configures the dacberry400 add on soundcard ++Load: dtoverlay=dacberry400 ++Params: ++ ++ ++Name: dht11 ++Info: Overlay for the DHT11/DHT21/DHT22 humidity/temperature sensors ++ Also sometimes found with the part number(s) AM230x. ++Load: dtoverlay=dht11,= ++Params: gpiopin GPIO connected to the sensor's DATA output. ++ (default 4) ++ ++ ++Name: dionaudio-kiwi ++Info: Configures the Dion Audio KIWI STREAMER ++Load: dtoverlay=dionaudio-kiwi ++Params: ++ ++ ++Name: dionaudio-loco ++Info: Configures the Dion Audio LOCO DAC-AMP ++Load: dtoverlay=dionaudio-loco ++Params: ++ ++ ++Name: dionaudio-loco-v2 ++Info: Configures the Dion Audio LOCO-V2 DAC-AMP ++Load: dtoverlay=dionaudio-loco-v2,= ++Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec ++ Digital volume control. Enable with ++ "dtoverlay=hifiberry-dacplus,24db_digital_gain" ++ (The default behaviour is that the Digital ++ volume control is limited to a maximum of ++ 0dB. ie. it can attenuate but not provide ++ gain. For most users, this will be desired ++ as it will prevent clipping. By appending ++ the 24dB_digital_gain parameter, the Digital ++ volume control will allow up to 24dB of ++ gain. If this parameter is enabled, it is the ++ responsibility of the user to ensure that ++ the Digital volume control is set to a value ++ that does not result in clipping/distortion!) ++ ++ ++Name: disable-bt ++Info: Disable onboard Bluetooth on Pi 3B, 3B+, 3A+, 4B and Zero W, restoring ++ UART0/ttyAMA0 over GPIOs 14 & 15. ++ N.B. To disable the systemd service that initialises the modem so it ++ doesn't use the UART, use 'sudo systemctl disable hciuart'. ++Load: dtoverlay=disable-bt ++Params: ++ ++ ++Name: disable-emmc2 ++Info: Disable EMMC2 controller on BCM2711. ++ The allows the onboard EMMC storage on Compute Module 4 to be disabled ++ e.g. if a fault has occurred. ++Load: dtoverlay=disable-emmc2 ++Params: ++ ++ ++Name: disable-wifi ++Info: Disable onboard WLAN on Pi 3B, 3B+, 3A+, 4B and Zero W. ++Load: dtoverlay=disable-wifi ++Params: ++ ++ ++Name: dpi18 ++Info: Overlay for a generic 18-bit DPI display ++ This uses GPIOs 0-21 (so no I2C, uart etc.), and activates the output ++ 2-3 seconds after the kernel has started. ++Load: dtoverlay=dpi18 ++Params: ++ ++ ++Name: dpi18cpadhi ++Info: Overlay for a generic 18-bit DPI display (in 'mode 6' connection scheme) ++ This uses GPIOs 0-9,12-17,20-25 (so no I2C, uart etc.), and activates ++ the output 3-3 seconds after the kernel has started. ++Load: dtoverlay=dpi18cpadhi ++Params: ++ ++ ++Name: dpi24 ++Info: Overlay for a generic 24-bit DPI display ++ This uses GPIOs 0-27 (so no I2C, uart etc.), and activates the output ++ 2-3 seconds after the kernel has started. ++Load: dtoverlay=dpi24 ++Params: ++ ++ ++Name: draws ++Info: Configures the NW Digital Radio DRAWS Hat ++ ++ The board includes an ADC to measure various board values and also ++ provides two analog user inputs on the expansion header. The ADC ++ can be configured for various sample rates and gain values to adjust ++ the input range. Tables describing the two parameters follow. ++ ++ ADC Gain Values: ++ 0 = +/- 6.144V ++ 1 = +/- 4.096V ++ 2 = +/- 2.048V ++ 3 = +/- 1.024V ++ 4 = +/- 0.512V ++ 5 = +/- 0.256V ++ 6 = +/- 0.256V ++ 7 = +/- 0.256V ++ ++ ADC Datarate Values: ++ 0 = 128sps ++ 1 = 250sps ++ 2 = 490sps ++ 3 = 920sps ++ 4 = 1600sps (default) ++ 5 = 2400sps ++ 6 = 3300sps ++ 7 = 3300sps ++Load: dtoverlay=draws,= ++Params: draws_adc_ch4_gain Sets the full scale resolution of the ADCs ++ input voltage sensor (default 1) ++ ++ draws_adc_ch4_datarate Sets the datarate of the ADCs input voltage ++ sensor ++ ++ draws_adc_ch5_gain Sets the full scale resolution of the ADCs ++ 5V rail voltage sensor (default 1) ++ ++ draws_adc_ch5_datarate Sets the datarate of the ADCs 4V rail voltage ++ sensor ++ ++ draws_adc_ch6_gain Sets the full scale resolution of the ADCs ++ AIN2 input (default 2) ++ ++ draws_adc_ch6_datarate Sets the datarate of the ADCs AIN2 input ++ ++ draws_adc_ch7_gain Sets the full scale resolution of the ADCs ++ AIN3 input (default 2) ++ ++ draws_adc_ch7_datarate Sets the datarate of the ADCs AIN3 input ++ ++ alsaname Name of the ALSA audio device (default "draws") ++ ++ ++Name: dwc-otg ++Info: Selects the dwc_otg USB controller driver which has fiq support. This ++ is the default on all except the Pi Zero which defaults to dwc2. ++Load: dtoverlay=dwc-otg ++Params: ++ ++ ++Name: dwc2 ++Info: Selects the dwc2 USB controller driver ++Load: dtoverlay=dwc2,= ++Params: dr_mode Dual role mode: "host", "peripheral" or "otg" ++ ++ g-rx-fifo-size Size of rx fifo size in gadget mode ++ ++ g-np-tx-fifo-size Size of non-periodic tx fifo size in gadget ++ mode ++ ++ ++[ The ds1307-rtc overlay has been deleted. See i2c-rtc. ] ++ ++ ++Name: edt-ft5406 ++Info: Overlay for the EDT FT5406 touchscreen. ++ This works with the Raspberry Pi 7" touchscreen when not being polled ++ by the firmware. ++ By default the overlay uses the i2c_csi_dsi I2C interface, but this ++ can be overridden ++ You MUST use either "disable_touchscreen=1" or "ignore_lcd=1" in ++ config.txt to stop the firmware polling the touchscreen. ++Load: dtoverlay=edt-ft5406,= ++Params: sizex Touchscreen size x (default 800) ++ sizey Touchscreen size y (default 480) ++ invx Touchscreen inverted x axis ++ invy Touchscreen inverted y axis ++ swapxy Touchscreen swapped x y axis ++ i2c0 Choose the I2C0 bus on GPIOs 0&1 ++ i2c1 Choose the I2C1 bus on GPIOs 2&3 ++ i2c3 Choose the I2C3 bus (configure with the i2c3 ++ overlay - BCM2711 only) ++ i2c4 Choose the I2C4 bus (configure with the i2c4 ++ overlay - BCM2711 only) ++ i2c5 Choose the I2C5 bus (configure with the i2c5 ++ overlay - BCM2711 only) ++ i2c6 Choose the I2C6 bus (configure with the i2c6 ++ overlay - BCM2711 only) ++ addr Sets the address for the touch controller. Note ++ that the device must be configured to use the ++ specified address. ++ ++ ++Name: enc28j60 ++Info: Overlay for the Microchip ENC28J60 Ethernet Controller on SPI0 ++Load: dtoverlay=enc28j60,= ++Params: int_pin GPIO used for INT (default 25) ++ ++ speed SPI bus speed (default 12000000) ++ ++ ++Name: enc28j60-spi2 ++Info: Overlay for the Microchip ENC28J60 Ethernet Controller on SPI2 ++Load: dtoverlay=enc28j60-spi2,= ++Params: int_pin GPIO used for INT (default 39) ++ ++ speed SPI bus speed (default 12000000) ++ ++ ++Name: exc3000 ++Info: Enables I2C connected EETI EXC3000 multiple touch controller using ++ GPIO 4 (pin 7 on GPIO header) for interrupt. ++Load: dtoverlay=exc3000,= ++Params: interrupt GPIO used for interrupt (default 4) ++ sizex Touchscreen size x (default 4096) ++ sizey Touchscreen size y (default 4096) ++ invx Touchscreen inverted x axis ++ invy Touchscreen inverted y axis ++ swapxy Touchscreen swapped x y axis ++ ++ ++Name: fbtft ++Info: Overlay for SPI-connected displays using the fbtft drivers. ++ ++ This overlay seeks to replace the functionality provided by fbtft_device ++ which is now gone from the kernel. ++ ++ Most displays from fbtft_device have been ported over. ++ Example: ++ dtoverlay=fbtft,spi0-0,rpi-display,reset_pin=23,dc_pin=24,led_pin=18,rotate=270 ++ ++ It is also possible to specify the controller (this will use the default ++ init sequence in the driver). ++ Example: ++ dtoverlay=fbtft,spi0-0,ili9341,bgr,reset_pin=23,dc_pin=24,led_pin=18,rotate=270 ++ ++ For devices on spi1 or spi2, the interfaces should be enabled ++ with one of the spi1-1/2/3cs and/or spi2-1/2/3cs overlays. ++ ++ The following features of fbtft_device have not been ported over: ++ - parallel bus is not supported ++ - the init property which overrides the controller initialization ++ sequence is not supported as a parameter due to memory limitations in ++ the bootloader responsible for applying the overlay. ++ ++ See https://github.com/notro/fbtft/wiki/FBTFT-RPI-overlays for how to ++ create an overlay. ++ ++Load: dtoverlay=fbtft,= ++Params: ++ spi- Configure device at spi, cs ++ (boolean, required) ++ speed SPI bus speed in Hz (default 32000000) ++ cpha Shifted clock phase (CPHA) mode ++ cpol Inverse clock polarity (CPOL) mode ++ ++ adafruit18 Adafruit 1.8 ++ adafruit22 Adafruit 2.2 (old) ++ adafruit22a Adafruit 2.2 ++ adafruit28 Adafruit 2.8 ++ adafruit13m Adafruit 1.3 OLED ++ admatec_c-berry28 C-Berry28 ++ dogs102 EA DOGS102 ++ er_tftm050_2 ER-TFTM070-2 ++ er_tftm070_5 ER-TFTM070-5 ++ ew24ha0 EW24HA0 ++ ew24ha0_9bit EW24HA0 in 9-bit mode ++ freetronicsoled128 Freetronics OLED128 ++ hy28a HY28A ++ hy28b HY28B ++ itdb28_spi ITDB02-2.8 with SPI interface circuit ++ mi0283qt-2 Watterott MI0283QT-2 ++ mi0283qt-9a Watterott MI0283QT-9A ++ nokia3310 Nokia 3310 ++ nokia3310a Nokia 3310a ++ nokia5110 Nokia 5110 ++ piscreen PiScreen ++ pitft Adafruit PiTFT 2.8 ++ pioled ILSoft OLED ++ rpi-display Watterott rpi-display ++ sainsmart18 Sainsmart 1.8 ++ sainsmart32_spi Sainsmart 3.2 with SPI interfce circuit ++ tinylcd35 TinyLCD 3.5 ++ tm022hdh26 Tianma TM022HDH26 ++ tontec35_9481 Tontect 3.5 with ILI9481 controller ++ tontec35_9486 Tontect 3.5 with ILI9486 controller ++ waveshare32b Waveshare 3.2 ++ waveshare22 Waveshare 2.2 ++ ++ bd663474 BD663474 display controller ++ hx8340bn HX8340BN display controller ++ hx8347d HX8347D display controller ++ hx8353d HX8353D display controller ++ hx8357d HX8357D display controller ++ ili9163 ILI9163 display controller ++ ili9320 ILI9320 display controller ++ ili9325 ILI9325 display controller ++ ili9340 ILI9340 display controller ++ ili9341 ILI9341 display controller ++ ili9481 ILI9481 display controller ++ ili9486 ILI9486 display controller ++ pcd8544 PCD8544 display controller ++ ra8875 RA8875 display controller ++ s6d02a1 S6D02A1 display controller ++ s6d1121 S6D1121 display controller ++ seps525 SEPS525 display controller ++ sh1106 SH1106 display controller ++ ssd1289 SSD1289 display controller ++ ssd1305 SSD1305 display controller ++ ssd1306 SSD1306 display controller ++ ssd1325 SSD1325 display controller ++ ssd1331 SSD1331 display controller ++ ssd1351 SSD1351 display controller ++ st7735r ST7735R display controller ++ st7789v ST7789V display controller ++ tls8204 TLS8204 display controller ++ uc1611 UC1611 display controller ++ uc1701 UC1701 display controller ++ upd161704 UPD161704 display controller ++ ++ width Display width in pixels ++ height Display height in pixels ++ regwidth Display controller register width (default is ++ driver specific) ++ buswidth Display bus interface width (default 8) ++ debug Debug output level {0-7} ++ rotate Display rotation {0, 90, 180, 270} (counter ++ clockwise). Not supported by all drivers. ++ bgr Enable BGR mode (default off). Use if Red and ++ Blue are swapped. Not supported by all drivers. ++ fps Frames per second (default 30). In effect this ++ states how long the driver will wait after video ++ memory has been changed until display update ++ transfer is started. ++ txbuflen Length of the FBTFT transmit buffer ++ (default 4096) ++ startbyte Sets the Start byte used by fb_ili9320, ++ fb_ili9325 and fb_hx8347d. Common value is 0x70. ++ gamma String representation of Gamma Curve(s). Driver ++ specific. Not supported by all drivers. ++ reset_pin GPIO pin for RESET ++ dc_pin GPIO pin for D/C ++ led_pin GPIO pin for LED backlight ++ ++ ++Name: fe-pi-audio ++Info: Configures the Fe-Pi Audio Sound Card ++Load: dtoverlay=fe-pi-audio ++Params: ++ ++ ++Name: fsm-demo ++Info: A demonstration of the gpio-fsm driver. The GPIOs are chosen to work ++ nicely with a "traffic-light" display of red, amber and green LEDs on ++ GPIOs 7, 8 and 25 respectively. ++Load: dtoverlay=fsm-demo,= ++Params: fsm_debug Enable debug logging (default off) ++ ++ ++Name: gc9a01 ++Info: Enables GalaxyCore's GC9A01 single chip driver based displays on ++ SPI0 as fb1, using GPIOs DC=25, RST=27 and BL=18 (physical ++ GPIO header pins 22, 13 and 12 respectively) in addition to the ++ SPI0 pins DIN=10, CLK=11 and CS=8 (physical GPIO header pins 19, ++ 23 and 24 respectively). ++Load: dtoverlay=gc9a01,= ++Params: speed Display SPI bus speed ++ ++ rotate Display rotation {0,90,180,270} ++ ++ width Width of the display ++ ++ height Height of the display ++ ++ fps Delay between frame updates ++ ++ debug Debug output level {0-7} ++ ++ ++Name: ghost-amp ++Info: An overlay for the Ghost amplifier. ++Load: dtoverlay=ghost-amp,= ++Params: fsm_debug Enable debug logging of the GPIO FSM (default ++ off) ++ ++ ++Name: goodix ++Info: Enables I2C connected Goodix gt9271 multiple touch controller using ++ GPIOs 4 and 17 (pins 7 and 11 on GPIO header) for interrupt and reset. ++Load: dtoverlay=goodix,= ++Params: interrupt GPIO used for interrupt (default 4) ++ reset GPIO used for reset (default 17) ++ ++ ++Name: googlevoicehat-soundcard ++Info: Configures the Google voiceHAT soundcard ++Load: dtoverlay=googlevoicehat-soundcard ++Params: ++ ++ ++Name: gpio-charger ++Info: This is a generic overlay for detecting charger with GPIO. ++Load: dtoverlay=gpio-charger,= ++Params: gpio GPIO pin to trigger on (default 4) ++ active_low When this is 1 (active low), a falling ++ edge generates a charging event and a ++ rising edge generates a discharging event. ++ When this is 0 (active high), this is ++ reversed. The default is 0 (active high) ++ gpio_pull Desired pull-up/down state (off, down, up) ++ Default is "down". ++ type Set a charger type for the pin. (Default: mains) ++ ++ ++Name: gpio-fan ++Info: Configure a GPIO pin to control a cooling fan. ++Load: dtoverlay=gpio-fan,= ++Params: gpiopin GPIO used to control the fan (default 12) ++ temp Temperature at which the fan switches on, in ++ millicelcius (default 55000) ++ hyst Temperature delta (in millicelcius) below ++ temp at which the fan will drop to minrpm ++ (default 10000) ++ ++ ++Name: gpio-hog ++Info: Activate a "hog" for a GPIO - request that the kernel configures it as ++ an output, driven low or high as indicated by the presence or absence ++ of the active_low parameter. Note that a hogged GPIO is not available ++ to other drivers or for gpioset/gpioget. ++Load: dtoverlay=gpio-hog,= ++Params: gpio GPIO pin to hog (default 26) ++ active_low If set, the hog drives the GPIO low (defaults ++ to off - the GPIO is driven high) ++ ++ ++Name: gpio-ir ++Info: Use GPIO pin as rc-core style infrared receiver input. The rc-core- ++ based gpio_ir_recv driver maps received keys directly to a ++ /dev/input/event* device, all decoding is done by the kernel - LIRC is ++ not required! The key mapping and other decoding parameters can be ++ configured by "ir-keytable" tool. ++Load: dtoverlay=gpio-ir,= ++Params: gpio_pin Input pin number. Default is 18. ++ ++ gpio_pull Desired pull-up/down state (off, down, up) ++ Default is "up". ++ ++ invert "1" = invert the input (active-low signalling). ++ "0" = non-inverted input (active-high ++ signalling). Default is "1". ++ ++ rc-map-name Default rc keymap (can also be changed by ++ ir-keytable), defaults to "rc-rc6-mce" ++ ++ ++Name: gpio-ir-tx ++Info: Use GPIO pin as bit-banged infrared transmitter output. ++ This is an alternative to "pwm-ir-tx". gpio-ir-tx doesn't require ++ a PWM so it can be used together with onboard analog audio. ++Load: dtoverlay=gpio-ir-tx,= ++Params: gpio_pin Output GPIO (default 18) ++ ++ invert "1" = invert the output (make it active-low). ++ Default is "0" (active-high). ++ ++ ++Name: gpio-key ++Info: This is a generic overlay for activating GPIO keypresses using ++ the gpio-keys library and this dtoverlay. Multiple keys can be ++ set up using multiple calls to the overlay for configuring ++ additional buttons or joysticks. You can see available keycodes ++ at https://github.com/torvalds/linux/blob/v4.12/include/uapi/ ++ linux/input-event-codes.h#L64 ++Load: dtoverlay=gpio-key,= ++Params: gpio GPIO pin to trigger on (default 3) ++ active_low When this is 1 (active low), a falling ++ edge generates a key down event and a ++ rising edge generates a key up event. ++ When this is 0 (active high), this is ++ reversed. The default is 1 (active low) ++ gpio_pull Desired pull-up/down state (off, down, up) ++ Default is "up". Note that the default pin ++ (GPIO3) has an external pullup ++ label Set a label for the key ++ keycode Set the key code for the button ++ ++ ++ ++Name: gpio-led ++Info: This is a generic overlay for activating LEDs (or any other component) ++ by a GPIO pin. Multiple LEDs can be set up using multiple calls to the ++ overlay. While there are many existing methods to activate LEDs on the ++ RPi, this method offers some advantages: ++ 1) Does not require any userspace programs. ++ 2) LEDs can be connected to the kernel's led-trigger framework, ++ and drive the LED based on triggers such as cpu load, heartbeat, ++ kernel panic, key input, timers and others. ++ 3) LED can be tied to the input state of another GPIO pin. ++ 4) The LED is setup early during the kernel boot process (useful ++ for cpu/heartbeat/panic triggers). ++ ++ Typical electrical connection is: ++ RPI-GPIO.19 -> LED -> 300ohm resister -> RPI-GND ++ The GPIO pin number can be changed with the 'gpio=' parameter. ++ ++ To control an LED from userspace, write a 0 or 1 value: ++ echo 1 > /sys/class/leds/myled1/brightness ++ The 'myled1' name can be changed with the 'label=' parameter. ++ ++ To connect the LED to a kernel trigger from userspace: ++ echo cpu > /sys/class/leds/myled1/trigger ++ echo heartbeat > /sys/class/leds/myled1/trigger ++ echo none > /sys/class/leds/myled1/trigger ++ To connect the LED to GPIO.26 pin (physical pin 37): ++ echo gpio > /sys/class/leds/myled1/trigger ++ echo 26 > /sys/class/leds/myled1/gpio ++ Available triggers: ++ cat /sys/class/leds/myled1/trigger ++ ++ More information about the Linux kernel LED/Trigger system: ++ https://www.kernel.org/doc/Documentation/leds/leds-class.rst ++ https://www.kernel.org/doc/Documentation/leds/ledtrig-oneshot.rst ++Load: dtoverlay=gpio-led,= ++Params: gpio GPIO pin connected to the LED (default 19) ++ label The label for this LED. It will appear under ++ /sys/class/leds/