From: Ira W. Snyder <iws@ovro.caltech.edu>
Date: Thu, 27 May 2010 17:58:44 +0000 (+0200)
Subject: hwmon: (lm90) Use programmed update rate
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=8c3c7a256f7ab142dfbcee2d8633dbce5a36fde7;p=openwrt%2Fstaging%2Fblogic.git

hwmon: (lm90) Use programmed update rate

The lm90 driver programs the sensor chip to update its readings at 2 Hz
(500 ms between readings). However, the driver only does reads from the
chip at intervals of 2 * HZ (2000 ms between readings). Change the driver
update rate to the programmed update rate.

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
---

diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 7cc2708871ab..760ef72eea56 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -982,7 +982,8 @@ static struct lm90_data *lm90_update_device(struct device *dev)
 
 	mutex_lock(&data->update_lock);
 
-	if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
+	if (time_after(jiffies, data->last_updated + HZ / 2 + HZ / 10)
+	 || !data->valid) {
 		u8 h, l;
 
 		dev_dbg(&client->dev, "Updating lm90 data.\n");